I updated my phone and after it rebooted the screen is just black and nothing comes up even if I try to turn it on. When I tried to connect my phone to my computer it came up in Device Manager as "qhsusb_bulk" under "Other" so I re-installed the latest LG USB Drivers then it came up in Device Manager as "Qualcomm HS-USB QDLoader 9008 (COM10)" under "Ports (COM & LPT)" Other than that my phone does nothing. How would I go about un-bricking it and or flashing it back to stock when I can't get the phone into Download Mode and LG Flash Tool doesn't recognize it otherwise.
Hi there and welcome to assist,
I can not find much information on your device but I did find this thread:
Unbrick stock rom lg tribute 5 ls675
You'll have to create an account to post in the main forums if you have any other questions.
Good Luck
Related
Hello, what is the right way to solve hardbricked phones on motorola android?
I dont know if every model has a different way...
I will ask about motorola xt626, iron rock...
I'll tell what I did to get
"Qualcomm HS-USB QDLoader 9008"
I was playing with this model, and then, tried to erase one file and phone never turned on again....
when phone is connected, "Qualcomm HS-USB QDLoader 9008" appears....
I remember I deleted one of these: svn.bin, dbl.mbn or osbl.mbn.
then phone never turned on again
I had no way to write that file again...
what steps should I follow when a phone is on this state?
I attach 2 files, you can see the files I have, and maybe tell me which one should I use to get that phone alive again....
I was able to get phone to "fasbtoot" again using "qflash -ramload MPRG7x30.hex -v", but, phone does not let me write... it always says remote failed
and when you reboot phone using fastboot reboot-bootloader, phone is stuck on "Qualcomm HS-USB QDLoader 9008" again....
could you please, point me, how to fix this phone?
I have working phones if needed
thanks
Hi,
Thanks for using XDA Assist Please post here Android Q&A, Help & Troubleshooting
Good Luck!
Thread Closed.
I used the LG Flash Tool 2014 for my device to try to recover from a bricked phone. And I think i made it worse after using the kdz file and it completed 100%. I took the battery out and unplugged the phone when it was done. It wont even show anything on the screen now or go into recovery mode. But I do show RELINK HS-USB QDLoader 9008 (COM5) under the device options in my device manager when I connect the phone to the computer. Also it does make the device connected sound when I plug it in the computer. What can I do to get out of this mess? Thanks in the advance for any help that I can get.
Any help will be appreciated. THanks.
I was following some thread(http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690) on how to unlock bootloader on my phone(LG L90 D410). I tried to flash some aboot.zip file and then when I tried to restart its dead. It doesn't boot up. No bootloader. No recovery. Nothing....everythings blank. and now my phone is detected as Qualcomm HS-USB QDLoader 9008 (COM10) in windows 10. I hope someone can help.
Thank You
XDA Visitor said:
I was following some thread(http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690) on how to unlock bootloader on my phone(LG L90 D410). I tried to flash some aboot.zip file and then when I tried to restart its dead. It doesn't boot up. No bootloader. No recovery. Nothing....everythings blank. and now my phone is detected as Qualcomm HS-USB QDLoader 9008 (COM10) in windows 10. I hope someone can help.
Thank You
Click to expand...
Click to collapse
Hi and welcome to XDA.
Try posting your query in the thread you were following. Experts there may be able to help you.
You'll have to create an account to post in the main forums.
Good luck
Recently I installer TWRP on my ZTE Blade S6... I flashed a wrong boot file through TWRP....... But after reboot my phone went black. Tried so many things but no luck.. When I connect the phone to PC it shows "Qualcomm HS-USB QDLoader 9008". Please Help...
sahil0668 said:
Recently I installer TWRP on my ZTE Blade S6... I flashed a wrong boot file through TWRP....... But after reboot my phone went black. Tried so many things but no luck.. When I connect the phone to PC it shows "Qualcomm HS-USB QDLoader 9008". Please Help...
Click to expand...
Click to collapse
Use Androidbrick tool to unbrick your android. I can give you the link of the tool but I can't post on XDA.
If you want PM me.
If it helped. Thank me.
Hey Stylo users
I have Lg G Stylo h636 on fido carrier. It seems to be hard bricked and the LED/screen doesnt turn on. I previously tried flashing a recovery and rom but i THINK i did so in the wrong order within the Android OS. So instead it wrote the recovery and rom, and then deleted the OS and partitions (I think??). It should have been done as; format the OS and THEN install the recovery and rom...so i did so backwards and borked my phone. Do you follow me so far?
Anyways, Im not sure what to do.
It shows up in control panel as under PORTS (COM & LPT)
Qualcomm HS-USB QDLoader 9008 (COM5)
My windows 7 picks it up..but from here on I dont know much else to do.
THANK YOU!