Related
Need support here tried to downgrade from MM to LP used the official LP TOT, it's kinda funny the dll I used worked without IMEI check now when I try to use that same dll it fails for no IMEI is there any way to fix this its in 9008 mode port 9 help me please NOT 9006 I think I just need to relax the about or boot.img
LGMONO said:
Need support here tried to downgrade from MM to LP used the official LP TOT, it's kinda funny the dll I used worked without IMEI check now when I try to use that same dll it fails for no IMEI is there any way to fix this its in 9008 mode port 9 help me please NOT 9006 I think I just need to relax the about or boot.img
Click to expand...
Click to collapse
Ok so what exactly did you do and what is the phone doing?
I did the .up forced mm update I had it for a week and with me I gotta have root so I used lgup to try and downgrade with LGH900AT-00-V10f-ATT-US-OCT-28-2015+0.tot used the dll 8994 it flashed however the phone shut off and when I tried to turn it on nothing seen is black and when I plug it in under device manager shows q loader 9008 port 2 I tried to fix it but when I try to use lgup it won't show a port so now I'm trying to fix it by using lg flash tool and the problem with that is the flash will fail to no imei if I try and use other dll it fails to model check I seriously really need to fix this phone I love this phone I f'ed this thing up playing to much
LGMONO said:
I did the .up forced mm update I had it for a week and with me I gotta have root so I used lgup to try and downgrade with LGH900AT-00-V10f-ATT-US-OCT-28-2015+0.tot used the dll 8994 it flashed however the phone shut off and when I tried to turn it on nothing seen is black and when I plug it in under device manager shows q loader 9008 port 2 I tried to fix it but when I try to use lgup it won't show a port so now I'm trying to fix it by using lg flash tool and the problem with that is the flash will fail to no imei if I try and use other dll it fails to model check I seriously really need to fix this phone I love this phone I f'ed this thing up playing to much
Click to expand...
Click to collapse
Is the download mode gone as well?
TheBobMiller said:
Is the download mode gone as well?
Click to expand...
Click to collapse
Yes I only have one mode thats 9008
Sent from my SM-T530NU using Xposed Modules
Thank god my phone is covered under warranty till 2017 sending out my v10 tomorrow free shipping too
Sent from my SM-T530NU using Xposed Modules
Can anyone with a rooted Stylo on 20G update make an EMMC backup and upload it.
I would really be grateful.
This is the way to do it:
Use command backup mmcblk0
adb shell
su
dd if=/dev/block/mmcblk0 of=/data/media/0/H631EMMC20G.img bs=1024 count=1048576
if you have SD Card (this would be better)
adb shell
su
dd if=/dev/block/mmcblk0 of=/mnt/media_rw/external_SD/H631EMMC20G.img bs=1024 count=1048576
Thanks in advance :good:
+1 please please please
Hello , this dump include system partition and 100% works.
Model: H631
Firmware: V20i
https://mega.nz/#!6NNAWTxY!_yHUA3jblBnOBwDjstZ0qpKelh0iGPiH96-RcKxLJeU
vim1 said:
Hello , this dump include system partition and 100% works.
Model: H631
Firmware: V20i
https://mega.nz/#!6NNAWTxY!_yHUA3jblBnOBwDjstZ0qpKelh0iGPiH96-RcKxLJeU
Click to expand...
Click to collapse
I've tried to wrigt this dump on sdcard, but nothing
I've tried once more and received LGE AndroidNet USB Serial Port instead of qualcomm 9008, bu no D mode
I had 20G also...
vim1 said:
Hello , this dump include system partition and 100% works.
Model: H631
Firmware: V20i
https://mega.nz/#!6NNAWTxY!_yHUA3jblBnOBwDjstZ0qpKelh0iGPiH96-RcKxLJeU
Click to expand...
Click to collapse
Needs to be 20G, not i.
@vim1 can you or @MrObvious upload a 20G emmc backup?
Would be really grateful for this!
Thanks in advance
Please share with google drive if possible !
I have a a LG H631 20G but I can not root it.
Please help me root it. I will dump system for you.
Thanks
yumax131 said:
I've tried once more and received LGE AndroidNet USB Serial Port instead of qualcomm 9008, bu no D mode
I had 20G also...
Click to expand...
Click to collapse
I have a same issue ! Phone can not enter into download mode !
Please help me if you have any way !
truonggiang0710 said:
I have a same issue ! Phone can not enter into download mode !
Please help me if you have any way !
Click to expand...
Click to collapse
I've sold my already, Z3 box or similar is needed!
truonggiang0710 said:
Please share with google drive if possible !
I have a a LG H631 20G but I can not root it.
Please help me root it. I will dump system for you.
Thanks
Click to expand...
Click to collapse
to root the device you must first unlock bootloader
enable usb debugging, enable OEM unlock (THIS WILL WIPE EVERYTHING ON YOUR PHONE)
adb reboot bootlader
fastboot oem_unlock
let it reboot
adb reboot bootlader (again)
fastboot flash recovery twrp.img (download TWRP)
reboot to recovery and flash latest supersu.zip
yumax131 said:
I've sold my already, Z3 box or similar is needed!
Click to expand...
Click to collapse
I'm a new Z3 box member ! Please help me more details !
I will buy a Z3 box to repair my phone !
Thanks a lot !
damn I wish I found this thread a few days ago lol. I did the same thing - bricked my stylo by trying to go for 20g back to 20c.
thejoker954 said:
damn I wish I found this thread a few days ago lol. I did the same thing - bricked my stylo by trying to go for 20g back to 20c.
Click to expand...
Click to collapse
And this community is so sh*i*t*t*y now everyone just wants to come and download stuff but not help others in need of backups or emmc imgs.
Well I'm thinking about grabbing a LG stylo with a bad ESN off of eBay for around $30, but I'm not sure if pulling the emmc backup from it would do any good for us. I have zero experience with bad ESN phones.
**Edit**
For anyone viewing this thread it is safe to go from the 20i (the newest one) to 20g it's only dangerous to go from 20g to 20c so if anyone feels like helping....
Also ms631 20g emmc backup would most likely work as well as they are the same phone
thejoker954 said:
Well I'm thinking about grabbing a LG stylo with a bad ESN off of eBay for around $30, but I'm not sure if pulling the emmc backup from it would do any good for us. I have zero experience with bad ESN phones.
**Edit**
For anyone viewing this thread it is safe to go from the 20i (the newest one) to 20g it's only dangerous to go from 20g to 20c so if anyone feels like helping....
Also ms631 20g emmc backup would most likely work as well as they are the same phone
Click to expand...
Click to collapse
Is there any MS631 20G emmc backup available anywhere? I really dont know if its a good idea to downgrade but you may try! If the phone is of no use to you I can buy it. It was my backup phone and I really liked the long lasting battery. :good:
Got a stylo from eBay with a clean esn\imei. It should be here in about a week, so I should be able to get the emmc up soon after that. Will post once it's ready
thejoker954 said:
Got a stylo from eBay with a clean esn\imei. It should be here in about a week, so I should be able to get the emmc up soon after that. Will post once it's ready
Click to expand...
Click to collapse
Thanks Joker! We'll be waiting.
https://www.4shared.com/file/LVARr4_hba/H631EMMC20G.html
this was created using the method from the first post. however I haven't managed to restore my phone from 9008 mode with it. wasn't even able to get the LGE AndroidNet USB Serial Port like i got with the 20i image. it may have to be done with a different sd card then the one I tested with.
thejoker954 said:
https://www.4shared.com/file/LVARr4_hba/H631EMMC20G.html
this was created using the method from the first post. however I haven't managed to restore my phone from 9008 mode with it. wasn't even able to get the LGE AndroidNet USB Serial Port like i got with the 20i image. it may have to be done with a different sd card then the one I tested with.
Click to expand...
Click to collapse
Mine did mount like the 20i backup but cant do anything to it and it isnt displaying anything on screen either
https://threatpost.com/another-linux...access/137800/
Would be awesome if that works
I played around a little and this happened...
https://photos.app.goo.gl/TiEXrdKmWydRM8RZ9
S8ntsHaz3 said:
I played around a little and this happened...
https://photos.app.goo.gl/TiEXrdKmWydRM8RZ9
Click to expand...
Click to collapse
Unlock critical is allowed and already known thing but this is for flashing bootloader and stuff. It doesn't help us at all for now.
There are already many rooted tmobile g7 sold in China.
I found a possible root it looks like it will work with any lg g710 Oreo. Is this not the case?
https://www.androidinfotech.com/2018/06/root-lg-g7-thinq-lmg710-oreo.html
curster said:
I found a possible root it looks like it will work with any lg g710 Oreo. Is this not the case?
https://www.androidinfotech.com/2018/06/root-lg-g7-thinq-lmg710-oreo.html
Click to expand...
Click to collapse
anyone tried it yet?
kasuma_asuma said:
anyone tried it yet?
Click to expand...
Click to collapse
So it's a fake post for one (actually not exactly fake I would say more clickbait then anything) two I believe the T-Mobile version is the G710TM, three we have a gimped fastboot as in it doesn't work at all. And four I think our only option is something to do with LAF
---------- Post added at 11:22 AM ---------- Previous post was at 11:21 AM ----------
curster said:
I found a possible root it looks like it will work with any lg g710 Oreo. Is this not the case?
https://www.androidinfotech.com/2018/06/root-lg-g7-thinq-lmg710-oreo.html
Click to expand...
Click to collapse
No it's not the case see my previous answer
We should be able to get around this gimped fastboot by incorperating that boot.img from the EM varient into an "update" once the phone is cross flashed. To 710EM it will have "adb update" command (it will also think the update is for itself since the firmware matches what were flashing we can put this into a flashable.zip (im like 75% sure this is how its done). Then use the command "adb update boot /path to patch boot/" alternatively could we incorperate our patched boot.img into a kdz and flash it with a patched LGup? Once the phone is rooted with magisk we could use the twrp app to flash twrp and fastboot commands wont be extremely relevant
The problem is, how to remove or get around the correct oem unlock allowed verification system. Unpacking a .img and editing is not a problem, i am just not exactly sure what to edit.
alecthenice said:
We should be able to get around this gimped fastboot by incorperating that boot.img from the EM varient into an "update" once the phone is cross flashed. To 710EM it will have "adb update" command (it will also think the update is for itself since the firmware matches what were flashing we can put this into a flashable.zip (im like 75% sure this is how its done). Then use the command "adb update boot /path to patch boot/" alternatively could we incorperate our patched boot.img into a kdz and flash it with a patched LGup? Once the phone is rooted with magisk we could use the twrp app to flash twrp and fastboot commands wont be extremely relevant
The problem is, how to remove or get around the correct oem unlock allowed verification system. Unpacking a .img and editing is not a problem, i am just not exactly sure what to edit.
Click to expand...
Click to collapse
I'm will definitely get root on every other device but there's two things that stop us.
1) it's impossible to extract anything from a kdz and a .up file (LGs way of updating)
2) dm-verify (but it's possible to get around)
LameMonster82 said:
I'm will definitely get root on every other device but there's two things that stop us.
1) it's impossible to extract anything from a kdz and a .up file (LGs way of updating)
2) dm-verify (but it's possible to get around)
Click to expand...
Click to collapse
So for dm-verify I know how to manually get around that and the patch thats floating around via flashable.zip. What do we need to extract from the .up or .kdz? Im pretty sure there is a full kdz dump for the 710EM in a thread I read through just last night? I really believe the only obstacle we have is making the bootloader unlock through a command line independent of the official unlock code. This should be able to be acheived by editing that in a way to where it doesnt check much like dm-verity. Then you can flash your (patched by deletion) boot.img run fastboot oem unlock ( btw did you know that "fastboot oem flashing unlock critical works) **could run that then flash an unlock.bin, then fastboot oem unlock unlock.bin** I am working with a 710pm varient. And am speaking from experience rooting the v30 ls version currently using G7 as daily driver
This leaves me thinking that we have lots of wiggle room here (also leaves me thinking how weird LG is for having a lot of variation within G7)
LameMonster82 said:
I'm will definitely get root on every other device but there's two things that stop us.
1) it's impossible to extract anything from a kdz and a .up file (LGs way of updating)
2) dm-verify (but it's possible to get around)
Click to expand...
Click to collapse
I use LG Firmware Extract to get the DLL's out, the problem is theres no firmware yet for the LG G7 Sprint version:
View attachment 4667707
GROOVYJOSHCLARK said:
I use LG Firmware Extract to get the DLL's out, the problem is theres no firmware yet for the LG G7 Sprint version:
Click to expand...
Click to collapse
Amazingly this week I was able to extract everything from any kdz file. The problem is that repacking requires certificate and we don't have it.
LameMonster82 said:
Amazingly this week I was able to extract everything from any kdz file. The problem is that repacking requires certificate and we don't have it.
Click to expand...
Click to collapse
Yes but we will figure it out eventually. I'm on Sprint myself and actively trying to figure out the LG cross flashing issue.
GROOVYJOSHCLARK said:
Yes but we will figure it out eventually. I'm on Sprint myself and actively trying to figure out the LG cross flashing issue.
Click to expand...
Click to collapse
So, do you want to cross flash or just the Sprint firmware
LameMonster82 said:
So, do you want to cross flash or just the Sprint firmware
Click to expand...
Click to collapse
There is no cross flashing on the G7 (or V35 or V40) unless you want a brick. LG got smart after the V30 WTF exploit and now uses a different RSA cert for every model.
Don't take my word for it, please feel free to try -- make sure you have insurance
-- Brian
runningnak3d said:
There is no cross flashing on the G7 (or V35 or V40) unless you want a brick. LG got smart after the V30 WTF exploit and now uses a different RSA cert for every model.
Don't take my word for it, please feel free to try -- make sure you have insurance
-- Brian
Click to expand...
Click to collapse
Yes but we will figure it out eventually so we can flash the EM firmware and unlock the bootloader then root and install TWRP then AOSP. I am waiting on my octoplus box to arrive then I'll be testing cross flashing for others to sort out what's needed.
GROOVYJOSHCLARK said:
Yes but we will figure it out eventually so we can flash the EM firmware and unlock the bootloader then root and install TWRP then AOSP. I am waiting on my octoplus box to arrive then I'll be testing cross flashing for others to sort out what's needed.
Click to expand...
Click to collapse
Awesome! But octoplus will not allow you to cross flashing, right?
any news on this ? would love to change my T-mobile software. and get the fingerprint to work for that matter
Kay, backstory. I bricked my phone, and MSM for the Global didn't work. I used the op9 pro indian MSM, and that worked, so now I'm with the incorrect firmware. OTA won't work, for whatever reason, so what should I do? No bootloader unlocking, not doing that stuff again
You can try fastboot image. You can find one around here. Otherwise, root, download full zip via OOS Updater and do a local update.
Twrp is also working for our device now, at least mostly.
gorilla p said:
You can try fastboot image. You can find one around here. Otherwise, root, download full zip via OOS Updater and do a local update.
Twrp is also working for our device now, at least mostly.
Click to expand...
Click to collapse
I would, but I don't wanna unlock bootloader
winterfoxx said:
I would, but I don't wanna unlock bootloader
Click to expand...
Click to collapse
I don't think there is a way to get back to global without
XxBigBuckxX said:
I don't think there is a way to get back to global without
Click to expand...
Click to collapse
I pulled it off, and am working on a comprehensive unbricking guide. Thanks!
winterfoxx said:
I pulled it off, and am working on a comprehensive unbricking guide. Thanks!
Click to expand...
Click to collapse
is it ready im in the same boat and curious on how you did it?
YourLocalDund33 said:
is it ready im in the same boat and curious on how you did it?
Click to expand...
Click to collapse
Yes, sorry about the late reply, here:
Global/US unbricking guide.
Global/US OnePlus 9 Unbricking Guide Tested and used on a LE2115 variant device. YOU SHOULDN'T USE THIS GUIDE UNLESS YOU ARE ABSOLUTELY SURE YOUR PHONE IS BRICKED. PLEASE TRY POWER COMBOS FIRST! THERE ARE NO GUARANTEES, AND THIS SHOULD BE A LAST...
forum.xda-developers.com
Okay so I was finally able to flash back to the tmobile firmware using msm tool
I'm testing everything out now but it seems fine still had to trick it into thinking it was the IN variant.
XxBigBuckxX said:
I'm testing everything out now but it seems fine still had to trick it into thinking it was the IN variant.
Click to expand...
Click to collapse
How exactly did you trick it?
JimmyJurner said:
How exactly did you trick it?
Click to expand...
Click to collapse
You download the msm tool you need and oppo_decrypt to extract the .ops file. Then there will be a file created called settings.xml and you just need to edit that file and add one line to the bottom in-between <SupportMultiTarget> , run oppo tool again to put it one big .ops file, So more so not trick it but just add support to for the IN model. Until I can figure out how to make it change on the actually device this is the best I can come up with. This is only if you are having trouble using your original msm tool and having to use the Indian Pro version. Its solved all my issues.
XML:
<Target ID="3" Desc="India" />
Hi all,
I need a N976V U7 (USB only) DEAD-BOOT file / DEAD-FIX file / DEBUG EMERGENCY / 9008 / UnBrick / firehose programmer
The SM-N976V is a Verizon variant of the Note 10+ 5G positioned for the US market.
PLEASE PLEASE PLEASE !!!
Thank you.
Network_Pro said:
Hi all,
I need a N976V U7 (USB only) DEAD-BOOT file / DEAD-FIX file / DEBUG EMERGENCY / 9008 / UnBrick / firehose programmer
The SM-N976V is a Verizon variant of the Note 10+ 5G positioned for the US market.
PLEASE PLEASE PLEASE !!!
Thank you.
Click to expand...
Click to collapse
you dont need that as far as you can get into EDL mode you can flash with miracle tool box
So the Miracle Tool support SM-N976V SW Rev . bit7 (U7) ? I didn't find it specifically mentioned anywhere. In the EDL mode the Qualcomm sm8150 requires the firehose programmer. For other models this file seems to available so there is hope that for this model it can also be obtained from GSPN USA probably or from a guy who knows a guy who knows a guy who passed by a Samsung building once wink wink.
Network_Pro said:
So the Miracle Tool support SM-N976V SW Rev . bit7 (U7) ? I didn't find it specifically mentioned anywhere. In the EDL mode the Qualcomm sm8150 requires the firehose programmer. For other models this file seems to available so there is hope that for this model it can also be obtained from GSPN USA probably or from a guy who knows a guy who knows a guy who passed by a Samsung building once wink wink.
Click to expand...
Click to collapse
am telling you from experience it happened to my device i bricked it and i used miracle tool crack with just stock rom i did the EDL i just selected scatter file etc and i flashed and that was it
Anyways Good luck unbricking
Which update was it? I think the problem is the bit7 / U7 the firehose for that is another one if it worked for previous versions.
Gudaji said:
am telling you from experience it happened to my device i bricked it and i used miracle tool crack with just stock rom i did the EDL i just selected scatter file etc and i flashed and that was it
Anyways Good luck unbricking
Click to expand...
Click to collapse
Gudaji please give more info how did you do it exactly? Which 'scatter' file did you write to the device ?
Network_Pro said:
Gudaji please give more info how did you do it exactly? Which 'scatter' file did you write to the device ?
Click to expand...
Click to collapse
Okay,
I unpacked the firmware got the scatter file put the device in edl mode (with pins) and flashed the device .
But make sure you watch legit tutorials on YouTube how to get miracle tool box crack
Gudaji said:
Okay,
I unpacked the firmware got the scatter file put the device in edl mode (with pins) and flashed the device .
But make sure you watch legit tutorials on YouTube how to get miracle tool box crack
Click to expand...
Click to collapse
I've deleted your other post in this thread for the same reasons I already provided you here:
[RELEASED] TWRP FOR REDMI 12C/Poco C55
So I've started development for device trees, TWRP and custom for Redmi 12C (earth) and by the end of may we should also have a rom and custom recovery for our Redmi 12C. So stay tuned
forum.xda-developers.com
Please read my message as a friendly warning!
Regards
Oswald Boelcke
Senior Moderator
Which firmware and which scatter file? It won't work with wrong ones. More specifics please.
Did you have a pre-made scatter file, that you have made before bricking/EDL ?
It is important to be precise.
Network_Pro said:
Which firmware and which scatter file? It won't work with wrong ones. More specifics please.
Did you have a pre-made scatter file, that you have made before bricking/EDL ?
It is important to be precise.
Click to expand...
Click to collapse
Your stock rom it is in your stock rom just unpack it or use ODIN to unbrick
Odin does not see the phone because the phone is in 9008 EDL mode and the driver for that one is from Qualcomm. Odin wants a mode and driver from Samsung. For the Samsung download - Odin mode to work, the later Boot stages need to load. Those are messed up by wrong etoken bypass for the wrong Update version or wrong BL or tripepd knox erasure of the entire flash or something of that sort.
In the stock ROM I do not know which file you can call a scatterfile? Is it the PIT file which is used for formatting?
This is the 'stock ROM' correct ? https://samfw.com/firmware/SM-N976V/VZW/N976VVRU7HWB2
Well for sure the Miracle Box has a huge collection of loaders in the distribution, as well as XML files. Very interesting.
@Gudaji, it seems, however that with U7 there may be needed a new loader. The update "bit" is somehow set inside the CPU, which, from my understanding, prevents older loaders from working?
Network_Pro said:
Well for sure the Miracle Box has a huge collection of loaders in the distribution, as well as XML files. Very interesting.
@Gudaji, it seems, however that with U7 there may be needed a new loader. The update "bit" is somehow set inside the CPU, which, from my understanding, prevents older loaders from
Click to expand...
Click to collapse
First of all do you have miracle tool box?
If so go to the Qualcomm tab and you will se flash tab under and then you select the files from your “extracted” firmware and flash while in EDL mode
The "Miracle Box Update 3.39 to 3.40 only for PS" informs me there is a new version and does not start. Maybe I do not have the right one.
Network_Pro said:
The "Miracle Box Update 3.39 to 3.40 only for PS" informs me there is a new version and does not start. Maybe I do not have the right one.
Click to expand...
Click to collapse
There is a bypass for it but you have to look for it
I am not finding it yet give me more clues on PM please.
If someone can share a working Miracle tool or sell me a license please PM me.
Network_Pro said:
I am not finding it yet give me more clues on PM please.
If someone can share a working Miracle tool or sell me a license please PM me.
Click to expand...
Click to collapse
Reply in my pm asap
Network_Pro said:
I am not finding it yet give me more clues on PM please.
If someone can share a working Miracle tool or sell me a license please PM me.
Click to expand...
Click to collapse
First off how did you brick your device
Spammed the download mode with some wrong files. older etoken bypass, vbmeta disabled, KG disabled , eng. files, modem from other model, boot from other model, twrp recovery not sure which exactly was a successful flash and which were rejected due to checksum mismatch.
Network_Pro said:
Spammed the download mode with some wrong files. older etoken bypass, vbmeta disabled, KG disabled , eng. files, modem from other model, boot from other model, twrp recovery not sure which exactly was a successful flash and which were rejected due to checksum mismatch.
Click to expand...
Click to collapse
hayahe sorry your mobile is dead kek
MIRACLE TOOLBOX IS YOUR 1 AND ONLY SOLUTION IF YOU DONT WANT TO PAY ANYONE IVE GIVEN YOU GUIDE IN YOUR PM SO GOODLUCK KEK