Related
Hi,
Following this steps you can have root, gapps and aditional languages in your Lenovo Sisley S90U (Unicom version). NOT TESTED in S90T or S90A versions, maybe works or maybe cause a system failure in these versions.
Thanks to Fazettit, He found the ROM.
1 - Download and install Lenovo driver 1.09, from attached files, in your PC.
2 - Donwload http://www.needrom.com/download/lenovo-s90u/ and unrar this files in your PC. Need to register in web to download.
3 - Enable USB debugging option in advanced/developer options in your sisley.
4- Power on your phone and stay in main screen. Connect USB cable to Lenovo Sisley and wait for detection and driver installation in your PC. When connect the cable select USB debugging (ADB) mode, sliding down the notifications bar and selecting the USB item. If get a pop up regarding to Allow USB debugging authorization, tick "Always Allow from this computer." and press OK.
5 - Run Lenovo_S90u.cmd in the extracted folder. A CMD window will open and detect S90U device, press ENTER key in your PC keyboard, the process will auto start.
6- Wait for the process to complete, do not remove USB cable or power off PC or phone, your Lenovo can be damaged/bricked.
7 - When flashing process finish, the phone will auto restart with new ROM image.
Regards!.
Thanks to Fazettit!.
We are working in a root solution for the other model S90T, stay alert on post.
Software Version
Unfortunately both root tools don't work for me.
I'm running VIBEUI_V2.0_1446_3.18.1_ST_S90-u
Which build do you have ?
Post updated.
eh...
:crying: All the options above are not working for me.... my device is Lenovo Sisley S90-t. is there any difference between s90-u and s90-t? and what should i do....
There are 3 version s90-A, S90-T and S90-U.
Can you reply the post with the error obtained.
Thanks!.
Hi,
ethan80 said:
There are 3 version s90-A, S90-T and S90-U.
Can you reply the post with the error obtained.
Thanks!.
Click to expand...
Click to collapse
My device is Lenovo S90-t
Build Number : VIBEUI_V2.0_1446_3.20.1_ST_S90-t
So, i followed everystep, then got stuck on step 5
Tried to use KingRoot, no success
Then tried to use iShuame, no success
I don't know what i am doing wrong...
Hope you can help me
Thank you
ZolboZN said:
My device is Lenovo S90-t
Build Number : VIBEUI_V2.0_1446_3.20.1_ST_S90-t
So, i followed everystep, then got stuck on step 5
Tried to use KingRoot, no success
Then tried to use iShuame, no success
I don't know what i am doing wrong...
Hope you can help me
Thank you
Click to expand...
Click to collapse
Same on my side: I have the Lenovo S90-T with Build number VIBEUI_V2.0_1446_3.20.1_ST_S90-t
I also followed every step, but got stuck on step 5 (also no success with KingRoot and Kingo Root).
Would be great if you could help me as well - thanks!
installable old firmware searched
Same for me - none of the root tools work. Maybe because of newer firmware.
Does someone has an older firmware (OTA as zip) which can be installed ?
Ok guys,
I attached to this reply a zip with 2 new tools just arrived from china ?. Seems to work in your new firmwares. The tools are Vroot 1.7.9.9 and 360 Root 5.20. Test the first one and if fail use the second. The procedure is the same than first post. Uninstall previous vroot version prior to install the new one.
Share with me the results please.
Regards.
Ethan
ethan80 said:
Ok guys,
I attached to this reply a zip with 2 new tools just arrived from china ?. Seems to work in your new firmwares. The tools are Vroot 1.7.9.9 and 360 Root 5.20. Test the first one and if fail use the second. The procedure is the same than first post. Uninstall previous vroot version prior to install the new one.
Share with me the results please.
Regards.
Click to expand...
Click to collapse
Thank you Ethan for trying to help us.
Unfortunately, its still not working i cant run 360root because it requires chines OS. No luck with Vroot....
These chinese root tools are so frustrating.....
I can't undestand why is not working for your versions, we can try a different solution, the mobile standalone versions. I attached the mobile versions of iroot (vroot) and 360 root.
Enable install from external sources option in S90 and install the apk. Run it and push root.
Test rootmastersu.apk first and later permroot.apk if the fitst don't work.
Regards!.
ethan80 said:
I can't undestand why is not working for your versions, we can try a different solution, the mobile standalone versions. I attached the mobile versions of iroot (vroot) and 360 root.
Enable install from external sources option in S90 and install the apk. Run it and push root.
Test rootmastersu.apk first and later permroot.apk if the fitst don't work.
Regards!.
Click to expand...
Click to collapse
Well, i guess i just have to patiently wait for the genuine rooting tool.....
Thank you so much Ethan!
Regards.
Yes! Thank you very much for your support Ethan.
Unfortunately all the rooting tools are still not working. Most likely because the firmware of the S90 is to new.
Most rooting tools use an exploit which has been fixed after July 2014.
The VIBEUI_V2.0_1446_3.18.1_ST_S90-u which is running on my devices is from November 2014 -> "old" root methods don't work.
If I'm right you should NOT update the firmware if you like to get root.
What firmware are you using Ethan ? (System->About phone->Device information->Build number)
Thank you very much for trying to help us!
The new tools don't work for me as well.
The root programs might work for 4.4.2 but not 4.4.4. So don't upgrade if you like to have root.
I still have a last chance from shenzen tecnologies attached... You can try it, I will get a new unit with firmware updated to do some tests.
Regards.
ethan80 said:
I still have a last chance from shenzen tecnologies attached... You can try it, I will get a new unit with firmware updated to do some tests.
Regards.
Click to expand...
Click to collapse
Hi Ethan80, thanks for your kind help. Hope that this version supports 4.4.4...previous versions support 4.4.2 only. I'll test as soon I can download it. In 4.4.4 the security holes of 4.4.2 have been fixed.
ethan80 said:
I still have a last chance from shenzen tecnologies attached... You can try it, I will get a new unit with firmware updated to do some tests.
Regards.
Click to expand...
Click to collapse
The download worked for me, but ROOTGenius doesn't work with my device...so I guess we'll have to wait until you can test with the updated firmware or new root tools are released. But thank you very much!!!
Same here, nothing help.
VIBEUI_V2.0_1441_3.2.1_ST_S90-u
i´ve get an update to VIBEU_V2.0_1446_3.18.1_ST_S90-u but i didnt install. Because maybe a method came for the older version
For the people without root. You can use the app "more locale 2" for more language without root access. You take the way with Cmd method
I have good news, I have now a tool to auto flash my custom ROM image with languages root and gapps to a s90U version. I will upload and explain here, however if anyone want to use it before send me a private mesage and I will send you the links and the instructions.
Regards.
Hello!
Some basic information:
phone region: FRD-L04
locked without twrp or any bootloader capabilities
I tried to update my Honor 8 to Nougat using the Team MT proxy method, which was successful in the sense that I had Nougat, but it was the beta version rather than B360. So with that in mind i tried to do a rollback to marshmallow, which was also successful, but I am now running in to the Google Verify Account security loop while setting up the phone again. It states that my phone was reset and to log in with a google account that was previously synced on the device. I log in with the only google account that was used on the phone and the question resets asking for a previously used account. Neither verifying automatically by phone # nor recovery email works.
I'm currently traveling in Japan and am trying everything I find by search(swipe keyboard bypass etc), but nothing seems to work.
Any help would be greatly appreciated!
Thank you,
Frank
I just did the same from b316 i couldnt get to b360 so i rollback to b131 and now i through hicare i can officially update to Nougat....
What i did was a SD-card upgrade by dialing *#*#2846579#*#* after i moved my 1st update package unzipped (the intermediate version b300 or whatever) to my dload folder in the SD card (i didn't wiped the SD card) then i did the same with the full update package. Once you are done with that you will back to marshmallow and then through HiCare you can update to Nougat.
For your problems with google account have to tried to factory reset and wipe everything? vol +- and power???
ftt28 said:
Hello!
Some basic information:
phone region: FRD-L04
locked without twrp or any bootloader capabilities
I tried to update my Honor 8 to Nougat using the Team MT proxy method, which was successful in the sense that I had Nougat, but it was the beta version rather than B360. So with that in mind i tried to do a rollback to marshmallow, which was also successful, but I am now running in to the Google Verify Account security loop while setting up the phone again. It states that my phone was reset and to log in with a google account that was previously synced on the device. I log in with the only google account that was used on the phone and the question resets asking for a previously used account. Neither verifying automatically by phone # nor recovery email works.
I'm currently traveling in Japan and am trying everything I find by search(swipe keyboard bypass etc), but nothing seems to work.
Any help would be greatly appreciated!
Thank you,
Frank
Click to expand...
Click to collapse
I suspect you didn't follow huawei's method to rollback, did you?
If yes, you should be on B122 (given that u have the L04 model), correct me if i'm wrong.
Sent from my FRD-L04 using XDA Labs
takichiman said:
I suspect you didn't follow huawei's method to rollback, did you?
If yes, you should be on B122 (given that u have the L04 model), correct me if i'm wrong.
Sent from my FRD-L04 using XDA Labs
Click to expand...
Click to collapse
Correct, the last boot I did was to B122. I followed huawei's method and, after booting to the intermediate B300, I booted to B122 found on Huawei's website. (can't post link because of new account but it's B122 for FRD-L04)
After a little more searching it seems I triggered the android security feature which locks out phones for 72 hours if the phone's previous account has had their password reset.
My phones behavior seems to agree with this security loop so it seems my rollback was done correctly, but I will need to wait 72 hours to find out. Sorry for my overreaction and making of a thread; the fact that I'm traveling made me quite anxious. Thank you both for the replies and help!
The US version of the ZC520TL (X008DC) has a firmware/software update available that will take you from MRA58K.US_Phone-13.1.4.17-20161011 to MRA58K.US_Phone-13.1.4.43-17-20170215. Still Android version 6.0.
This downloaded before I could get a LogCat to capture the ASUS storage address.
Could some one else please capture a LogCat and post it here so we can download the firmware/software in order to help us gain root access?
I have the same model and there us no update?
So if there is no update, why did I receive a new software notice, go through the update and install process and then see my version numbers change? Also, the security patch changed from August 2016 to January 2017.
That sounds like all the parts that qualify as an update to me.
tcaudill01 said:
So if there is no update, why did I receive a new software notice, go through the update and install process and then see my version numbers change? Also, the security patch changed from August 2016 to January 2017.
That sounds like all the parts that qualify as an update to me.
Click to expand...
Click to collapse
I went and manually check for the update and yes ,there is a new update, let me update and see if I can give the information you are looking for
regards
Hi,
Just updated my phone yesterday and had problems with my pattern unlock, it just doesn't work anymore, as every time you reboot your phone it asks for your pattern, even with a fingerprint unlock enabled I can't pass lock screen, anyone having same issues? Weird thing is that even missing the pattern several times (close to hundred) it never blocks for 30 seconds or asks "Did you forget you pattern?" to try my google pass instead...
Any help is appreciated, no debug mode enabled, so no adb/fastboot either...
Thanks in advance!
Can anyone tell me if there is a root for this device on 7.0 ? Thank you.
FatKris said:
Can anyone tell me if there is a root for this device on 7.0 ? Thank you.
Click to expand...
Click to collapse
Yes, try this method https://forum.xda-developers.com/zenfone-3/how-to/actual-solution-to-rooting-crisis-t3672618
work for me
I have a seemingly stupid but still annoying problem. As many of you know Android 8 + EMUI 8 came out this summer and I have updated my Honor8. Everything works well, even better (especially with regard to the battery) apart from a problem, quite annoying. I have seen that everyone around complains about the same problem, so it is clear that both a build bug and not a local problem.
Basically ... the bluetooth link with the multimedia system of my car doesn't work as it should, while it worked well with the 7.0.
Tracknames, music infos disappears, sometimes it connects regularly, starting the music, sometimes nothing happens, sometimes the music passes from the car speakers to smartphone (!!)... in short, manage the music in the car It has become a big problem!
I tried all possible options; reset pairing, reset bluetooth, clear cache, activate the developer options to control some low-level aspects of bluetooth, and finally installed Bluetooth Auto Connect which also has several advanced options. Nothing works. In the meantime an update of 8.0 has been released (mine is the buiold 521). The update came out in September ... maybe (MAYBE) this update fixes all bluetooth issues (but i don't have any detailed info about). Until today I have not received any updates and normally I check new version regularly every day. At this point I decided to return to Nougat!
And here the adventure begins!
I CANNOT IN ANY WAY do the downgrade.
What I tried:
- through HiSuite. The "back to previous version" option appears random (rarely); normally the program tells me "the system is up to date". Once appeared I tried to run the procedure, but after the decompression it gives me an error "error updating".
- by standard Rollback procedure. Using a microSD and putting the full version of Nougate in the dload folder. The installation starts but stops almost immediately with the same "update cannot be applied" error.
At this point I am desperate. I cannot update Oreo, I can't go back to Nougat and meanwhile the bluetooth still doesn't work with my car. Remember that before Oreo, everything worked very well!
What can I do? Can you help me?
Thank you
hi / i can help u / pls say me this:
your region(Ru/Eu/Cn.......)
your model( FRD-L09/L19/L04........)
Your Build number
and which build you upgrade to emui 8
m2relax said:
hi / i can help u / pls say me this:
your region(Ru/Eu/Cn.......)
your model( FRD-L09/L19/L04........)
Your Build number
and which build you upgrade to emui 8
Click to expand...
Click to collapse
Region: EU
Model: FRD-L09
Build: 8.0.0.521 (C432)
Previous Build: don't remember. It was Nougat, and I've upgraded around the first week of September. From that day I haven't received/applied any patch, because nothing appears until now.
This morning I've tried again with HiSuite. As usual it says I'm running the latest version and it doesn't offer any downgrade option .
Thelothian said:
Region: EU
Model: FRD-L09
Build: 8.0.0.521 (C432)
Previous Build: don't remember. It was Nougat, and I've upgraded around the first week of September. From that day I haven't received/applied any patch, because nothing appears until now.
This morning I've tried again with HiSuite. As usual it says I'm running the latest version and it doesn't offer any downgrade option .
Click to expand...
Click to collapse
dont worry/ do u change region of your phone past?
m2relax said:
dont worry/ do u change region of your phone past?
Click to expand...
Click to collapse
Never. And never jailbroken or rooted...
Thelothian said:
Never. And never jailbroken or rooted...
Click to expand...
Click to collapse
ok / pls do this work step by step :
1-Get Unlock Code for your Phone
2-Unlock your phone with Unlock Code
3-install TWRP recovery
4-after install TWRP notice me to send a file for u ( u must flash it from recovery TWRP )
5-after flashing u most install recovery stock
6-End and your problem is done! :fingers-crossed:
m2relax said:
ok / pls do this work step by step :
1-Get Unlock Code for your Phone
2-Unlock your phone with Unlock Code
3-install TWRP recovery
4-after install TWRP notice me to send a file for u ( u must flash it from recovery TWRP )
5-after flashing u most install recovery stock
6-End and your problem is done! :fingers-crossed:
Click to expand...
Click to collapse
I Heard TWRP doesn't work well on Oreo...
CurlyApple said:
I Heard TWRP doesn't work well on Oreo...
Click to expand...
Click to collapse
no if you use multi tools 8 for install twrp its work perfectly on oero
m2relax said:
no if you use multi tools 8 for install twrp its work perfectly on oero
Click to expand...
Click to collapse
The more you know...
Finally I've decide to try updating to 8.0.0.562. After a month of tries, fails (damn Huawei and his stupid update system), errors and a lot of other stupid things, I was finally able to update my Honor hoping the latest version will fix all the problems. It was a enormous waste of time (searching around internet)... but in the end I found a method described here: https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085#4And if you go ahead you should find the correct firmware link (on a Russian site). Although, IMHO, failing with the classic method was due to the impossibility or some bugs in the update system, to unpack the update files on sdcard. So the solution seems to be to leave both the zip and the unpacked folder.The problems with bluetooth remain, but I hope that now there is not to be crazy applying next updates. ATTENTION: the method above is NOT valid for rollback! If you try, you'll brick your Honor.
And finally I've taken an important decision... for me this is the last Huawei/honor device. Next time I'll go to another brand, with a serious update system.
Hello,
I have the same problem whit my honor, bluetooth lost signal random times, and my battery is faster get low, on android 7 i dont feel thees problems. Anyone have an idea how can i downgrade to nougat or marshmallow? My phone infos:
-FRD-L09 8.0.0.521(C432), I bought it in Hungary (i think its an EU modell), the phone have an unlocked bootloader, and flashed whit TWRP recovery
Who know the solution, pls reply here or, write me an email. Big thanks
scseke said:
Hello,
I have the same problem whit my honor, bluetooth lost signal random times, and my battery is faster get low, on android 7 i dont feel thees problems. Anyone have an idea how can i downgrade to nougat or marshmallow? My phone infos:
-FRD-L09 8.0.0.521(C432), I bought it in Hungary (i think its an EU modell), the phone have an unlocked bootloader, and flashed whit TWRP recovery
Who know the solution, pls reply here or, write me an email. Big thanks
Click to expand...
Click to collapse
flash this file with twrp and install stock recovery and do reset factor / finally use hisuite to rollback
I have problem with 4g signal on oneplus 7 . After update to oxygen os 10.0.3 i have problem with 4g,i have no signal 4g ,and very poor Network signal.I did many things to fix that,did changed settings,did factory reset, nothing happened, problem still same. I did downgrade to Android 9 and oxygen os 9.5.8 same version was when i bought this phone, after downgrade anyway problem still same,no 4G signal. I did changed sim card replaced new sim card, nothing happened, problem still same.Maybe anyone knows how to fix that ?
Thanks
Hi, probably you lost some network bands if you are rooted you can check it with network signal guru from playstore.
If that's right there are some guides here on xda how to restore em up, for the guide check Mi A1 forum or let me know and I will send you the link.
Illuminatus_ said:
Hi, probably you lost some network bands if you are rooted you can check it with network signal guru from playstore.
If that's right there are some guides here on xda how to restore em up, for the guide check Mi A1 forum or let me know and I will send you the link.
Click to expand...
Click to collapse
Thank you for information,i tried to do root but have problem all the time, Bootloader already unlocked ,but when i trying to flash twrp image getting fault ( fastboot failed, remote unknown command) I don't know how to fix that. Can find anything on internet any info.
skeltukas said:
Thank you for information,i tried to do root but have problem all the time, Bootloader already unlocked ,but when i trying to flash twrp image getting fault ( fastboot failed, remote unknown command) I don't know how to fix that. Can find anything on internet any info.
Click to expand...
Click to collapse
Try this guide to root your phone
https://forum.xda-developers.com/oneplus-7/how-to/guide-unlock-bootloader-flash-twrp-root-t3954559
Dont forget to enable usb debugging in your phone.
Good luck.
skeltukas said:
Bootloader already unlocked ,but when i trying to flash twrp image getting fault ( fastboot failed, remote unknown command)
Click to expand...
Click to collapse
What version TWRP?
Although rooting to diagnose a network problem seems a little excessive.
How did you update, did the OTA download automatically, or did you pick the file yourself? If the latter, are you sure it is the right OTA file for your phone version?
TWRP version 3.3.1-1
When i got phone ,he arrived from China AliExpress. He arrived with Global oxygen os 9.5.8 , i did change to Europe version oxygen os, everything worked very well , I didn't had any problems,4G signal was good as well , till i was on android 10 and oxygen 10.0.2 was fine,but after i did get update to 10.0.3 my 4G gone . Few udates i did by Oxygen os updater,last one i did get OTA automatically. Now i did downgrade to 9.5.8 to global version. Still don't have 4G signal. Just battery very good on android 9 and oxygen os 9.5.8 , 11 hour screen on.
skeltukas said:
TWRP version 3.3.1-1
Click to expand...
Click to collapse
Too old to work with Android 10, that is why fastboot boot command is broken. You need to use one of the unofficial TWRP builds, I think at least -65 (current is -74).
Doesn't explain your LTE problem, just will fix the issue with booting TWRP (root, etc.).
redpoint73 said:
Too old to work with Android 10, that is why fastboot boot command is broken. You need to use one of the unofficial TWRP builds, I think at least -65 (current is -74).
Doesn't explain your LTE problem, just will fix the issue with booting TWRP (root, etc.).
Click to expand...
Click to collapse
Thank you for reply to my message, I don't know what about Android 10, I'm now currently on Android 9, as i wrote i did downgrade ,from Android 10 oxygen os 10.0.3 ,to Android 9 oxygen os 9.5.8
I did tried to flash
TWRP 3.3.1-1
TWRP 3.3.1-65
TWRP 3.3.1-70
TWRP 3.3.1-74
All the time have same error.
Sending boot img <56612> OKAY [ 2.714s ]
Booting Failed <remote: 'unknown comman'>
Fastboot : error: Coman failed
Illuminatus_ said:
Hi, probably you lost some network bands if you are rooted you can check it with network signal guru from playstore.
If that's right there are some guides here on xda how to restore em up, for the guide check Mi A1 forum or let me know and I will send you the link.
Click to expand...
Click to collapse
Hello, can you send me link? Seems i have problem with network bands.
Here you are , look's little complicated but it's easy.
https://forum.xda-developers.com/mi-a1/how-to/lte-t3854592/amp/
Illuminatus_ said:
Here you are , look's little complicated but it's easy.
https://forum.xda-developers.com/mi-a1/how-to/lte-t3854592/amp/
Click to expand...
Click to collapse
Thanks for sharing the info. I was in the same situation, followed the guide (I confirm, it's really easy) and now 4G+ is back!
I'm glad that you solved your problem, this guide helped lot of people especially Mi A1 users
(we lost band 20 after updating our device from Android 8.1 to 9)
Illuminatus_ said:
I'm glad that you solved your problem, this guide helped lot of people especially Mi A1 users
(we lost band 20 after updating our device from Android 8.1 to 9)[/QUOTE
I did everything by this guide ,but no luck,still same problem no LTE (4G) signal. I don't know what's wrong .
Click to expand...
Click to collapse