Related
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Normally you just have to try agaion without resettiong yout device. Just restart your computer and restart the upgrade. If it says USB V1.00 it's much better then it says nothing ! i'm shure it will not be dead at thîs point !!
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
embraser said:
dary said:
Hi Mate, try this one:
https://after-sales-service.t-mobil.../t-mobile_sw/ma_tmde_10601_130_10500_ship.zip
it will flash a German Complete ROM, but it even works if your PDA is Dead (in mycase it helped)
Please tell if your lucky =)
Click to expand...
Click to collapse
I tryed it and got this message:
Click to expand...
Click to collapse
That's the country id error normally its simple to get that propblem solved but i don't know how, it must be somewhere at the forum here
I tryed using this:
MaUpgradeUt_noID.exe
but got a .dll error
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
kta said:
embraser,
see my last post in this thread:
http://forum.xda-developers.com/viewtopic.php?t=13228&start=350
I posted the MA_UpgradeUT_Kabubi that I used in order to flash mine. If you're getting a DLL error make sure that you're copying this file in the same folder as the other files (in the TEMP folder)
Click to expand...
Click to collapse
I'm about to give up...
This gets more complicated as a new attempt to help me arrives.
What other files in the TEMP folder are you talking about?
I think I'm probably in need of a step by step, because I don't know anymore what to do with all the files you guys were so kind on giving me.
Please...
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
HighPingBastard said:
Very easy:
1. Get that ROM fille (it should be an exe)
2. Put it in a folder (e.g. C:\ROM)
3. Right click on the rom file and select "extract files here" (if you have WinRAR)...basically just extract the files to the folder.
4. Put MaUpgradeUT_noID in same folder
5. Run MAUpgradeUT_noID
Click to expand...
Click to collapse
6. you will get a country id error..... don't panic leave the device connected and run the MAUpgradeUT_noID again and everything should go fine......
cheeeeeeeers
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
embraser said:
it still didn't work...
I got the rom, put the no id file in the same folder, executed the upgrade and got the wrong id country message, then i ran the no id file and again got the .dll error, then i repeated it several times and still nothing.
Click to expand...
Click to collapse
Did you extract the rom into the folder? If you Unzip ma_tmde_10601_130_10500_ship.zip you end up with a file called ma_tmde_10601_130_10500_ship.exe. Once you have this file, you should right click on it and use the "extract here" option. If you do not have this option then you need to install winrar.
The folder you extract the rom to should have the following files visible.
EnterBL.exe
GetDeviceData.exe
MaUpgradeUT.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
copy over the no country file and re run it following the above instructions.
I did all you told me to do, downloaded the
ma_tmde_10601_130_10500_ship.zip
extracted the
MA_TMDE_10601_130_10500_Ship.exe
then right-clicked on it an there's no extraction option, only compression on winrar.
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Finally some progress.
I used the
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
file and it did something in 2 stages, some radio upgrade and then something else, but nothing else.
Now what?
dary said:
here it is =)
www.world-board.net/tmde.zip
I Unzipped it and add the NOID exe =)
But I just want to tell you once more, your MDAc is German after this Procedure
Click to expand...
Click to collapse
after that is there any way to put it in english?
embraser said:
I really need help on this guys, so please tell me what to do.
I tryed to install a Rom update I got from armadillo on my s100 and it apears that it erased everything I had on it.It does'nt even turn on, the only thing that appears on the screen are:
USB
v1.00
What did I do to it?
What do I do now?
Pleeeeeassseeeeeeeeee help me..........
Click to expand...
Click to collapse
Now your s100 will be able to turned on =)
and after that an error
then this happens...
Hello all,
Firs I like to apologies if I've posted in the wrong section of the forum.
As the title says, I have a Iglo A101 with GingerBread 2.3.4 phone and I accidently deleted the system/bin/sh file.
I was searching for a2sd and I downloaded it, but when running it, instead of pressing 1 - "install a2sd" I pressed 2 "uninstall a2sd", by mistake, and by the time I realized the sh file was deleted. Now the phone is no longer rooted and can't be rooted and also my Wi-Fi doesn't work anymore.
I've search the net for answer but I can't find a solution to this type of phone.
Could someone help me fix this or at least get the Wi-Fi working again?
Thanks in advanced...
OK, I've manage to contact the retailer and he gave me what appears to be the all system files, as now I have a rar containg system.img userdata.img recovery.img etc etc. How do I install this files, because he doesn't appear to know either. I tried from the recovery mode using install update.zip from sdcard but it give's me invalid OTA package and I can't find an answer on how to flash a img file from recovery mode...
pitvenin said:
OK, I've manage to contact the retailer and he gave me what appears to be the all system files, as now I have a rar containg system.img userdata.img recovery.img etc etc. How do I install this files, because he doesn't appear to know either. I tried from the recovery mode using install update.zip from sdcard but it give's me invalid OTA package and I can't find an answer on how to flash a img file from recovery mode...
Click to expand...
Click to collapse
Does the device have fastboot? If so the files need to flashed using fastboot. The command is fastboot flash boot boot.img
Fastboot flash system system.img.
If your device does not have fastboot then you will need to extract the system.img and make a flashable .zip so you can flash through CWM or whatever your recovery is. If you are using stock recovery then I eexpect you will either need to find a solution or send it off for repair. I will have a look into helping you get your device back up and running but I cant promise to succeed. Give me a few days and I will report back with any solutions or info to get you on your way to fixing your device.
Regards
Blackwatch
Sent from my LT18i using xda premium
pitvenin said:
Hello all,
Firs I like to apologies if I've posted in the wrong section of the forum.
As the title says, I have a Iglo A101 with GingerBread 2.3.4 phone and I accidently deleted the system/bin/sh file.
I was searching for a2sd and I downloaded it, but when running it, instead of pressing 1 - "install a2sd" I pressed 2 "uninstall a2sd", by mistake, and by the time I realized the sh file was deleted. Now the phone is no longer rooted and can't be rooted and also my Wi-Fi doesn't work anymore.
I've search the net for answer but I can't find a solution to this type of phone.
Could someone help me fix this or at least get the Wi-Fi working again?
Thanks in advanced...
Click to expand...
Click to collapse
You have use flash tools to flash those files in your mobile.......upload your build.prop under /system/
I'll tell you more!!
Sent from my GT-I5801 using XDA
I have stock recovery 3e. I tried to make an update.zip but I keep getting invalid OTA Package..
Here is the build.prop, sorry for my late response
And here is the one that is on my phone, I've manage to get it using jota text editor. Some how that application can still see some system files, but it can't write..
pitvenin said:
I have stock recovery 3e. I tried to make an update.zip but I keep getting invalid OTA Package..
Here is the build.prop, sorry for my late response
Click to expand...
Click to collapse
Do you have an update.zip of complete ROM for you phone??
If so, then upload your recovery.img....i'll mod it & give you a modded recovery......
here it is
any luck?
pitvenin said:
any luck?
Click to expand...
Click to collapse
Trying....
hi
i had similar problem on this device a101 i did not delete any folder but by rooting the device my wifi and Bluetooth stoped working.i solved the problem by the factory menu.....have you tried it?
i did factory reset, but since there a system file missing it doesn't solve it..Can't there be a way to create an update.zip package with the sh file and then apply like an update from recovery? I've been trying to understand what does invalid OTA package mean, I think if that would be solved then I could easily put the file back...
i think you need spb launcher
i have to admit i used it only ones before for china 5388 there i needed com + usb cable here you need just a normal cable us the boot on this phone is different i have all you need give me email i will send to you. i have scater for a101 file too.i never used it but i have.Us i said my phone work ok after reset from factory mode
still nothing?
pitvenin said:
OK, I've manage to contact the retailer and he gave me what appears to be the all system files, as now I have a rar containg system.img userdata.img recovery.img etc etc. How do I install this files, because he doesn't appear to know either. I tried from the recovery mode using install update.zip from sdcard but it give's me invalid OTA package and I can't find an answer on how to flash a img file from recovery mode...
Click to expand...
Click to collapse
If you have the system.img image, you can try to flash it in the phone with SP Flash Tool,
Here is the tutorial:
bm-smartphone-reviews.blogspot.com/2011/10/mt65x3-flashing-tutorial.html
arcristi..all I can say is : THANK YOU!
I finally managed to get the system files back, I'm gonna hang on to this program just in case....Thanks again
A101 Android
Please, can you here to give all system files, which were sent to you from retailer? I have the same model. Thanks!
Hello, I have a jiayu G3T ( G3QCT ) with JB Android 4.2.1 installed , but yesterday it occurred to me to look for a custom rom 4.2.2 , I downloaded the rom, and follow the instructions ( wipe data / factory reset wipe cache && && wipe dalvik ) then install the new rom, everything seems to be right , but when the phone rebooted , I noticed that said " INVALID IMEI " and did not detect the SIM card ...
I have no backup of the IMEI ( if I have the sticker underneath the battery)
I reinstalled the rom I had before jiayu , which comes standard rooted ,I have tried uncle tools and the application of jiayu , I entered the engineer mode so I went to connectivity CDS information Radio information, phone 1 & 2 wrote 2 lines (one for each option )
AT + EGMR = 1.7, " IMEI "
AT + EGMR = 1.10 , " IMEI "
but when you click on send command says " command failed to send, even after pressing repeatedly says " command was mSent " but on reboot, nothing has changed, and the IMEI is still not valid .
I tried the mtkdroidtools but says it was all right , the result is the same, nothing changes
I also tested the MAUI META 3G & IMEI and SN WRITER but I have not gotten any results ...
Someone could tell me how to fix it? thanks
I'd suggest you re flash stock rom using SP Tools, then use SN Gen to create a MP0B_001 file. Then place the generated file on your SD card, use root explorer, copy the file you have placed on the SD card and move it to /data/nvram/md/NVRAM/NVD_IMEI/, and set the file's permission to rw-rw----.
Then reboot and enjoy.
stock rom
and where i cant get that stock rom? could you link it to me?
sn_gen
ViKtory36 said:
I'd suggest you re flash stock rom using SP Tools, then use SN Gen to create a MP0B_001 file. Then place the generated file on your SD card, use root explorer, copy the file you have placed on the SD card and move it to /data/nvram/md/NVRAM/NVD_IMEI/, and set the file's permission to rw-rw----.
Then reboot and enjoy.
Click to expand...
Click to collapse
the stock rom could be any of http://www.jiayu.es/software.php?soft&jiayu=G3QCT ?
I have used (4.2.1)ROM Oficial Jiayu.es 20131203-000001 (the latest) and sn_gen to recover my IMEI.... but after copy and set the permissions, and reboot, anything changes, what Im doing wrong?
tdguchi said:
the stock rom could be any of http://www.jiayu.es/software.php?soft&jiayu=G3QCT ?
I have used (4.2.1)ROM Oficial Jiayu.es 20131203-000001 (the latest) and sn_gen to recover my IMEI.... but after copy and set the permissions, and reboot, anything changes, what Im doing wrong?
Click to expand...
Click to collapse
I see that the website is in Spanish, so I may interpret the files incorrectly.
I'm gonna presume that you have already downloaded and installed the required MTK VCOM Drivers, and the device's drivers which are also given on the website. Install both if you haven't already.
I see there is a scatter loading file present under the downloads. Download the scatter loading and the latest ROM. Extract both the ROM files and the Scatter Loading file to a same single folder. Then use SPFlashtool and select the scatter loading file from the extracted folder, and check ALL the boxes.
Then remove the battery from your phone, connect the phone to the PC, and click "Download" on SP Flash Tool. After it finishes, you should see a box with a green circle, which indicates the flashing was successful.
After that, put the MP0B_001 file on your SD card, and follow the steps given by me on post #2.
And don't forget to hit thanks if I have helped. =]
tried.....but no working
ViKtory36 said:
I see that the website is in Spanish, so I may interpret the files incorrectly.
I'm gonna presume that you have already downloaded and installed the required MTK VCOM Drivers, and the device's drivers which are also given on the website. Install both if you haven't already.
I see there is a scatter loading file present under the downloads. Download the scatter loading and the latest ROM. Extract both the ROM files and the Scatter Loading file to a same single folder. Then use SPFlashtool and select the scatter loading file from the extracted folder, and check ALL the boxes.
Then remove the battery from your phone, connect the phone to the PC, and click "Download" on SP Flash Tool. After it finishes, you should see a box with a green circle, which indicates the flashing was successful.
After that, put the MP0B_001 file on your SD card, and follow the steps given by me on post #2.
And don't forget to hit thanks if I have helped. =]
Click to expand...
Click to collapse
Well... that is what I did... was unsucccessful... imei is till missing... i have contacted jiayu support.. they said me that some phone are not able to restore IMEI in a easy way..... the ask me 18€ ( $24) aswell they ask me to pay the Shipping rates... so they could try to fix it...
tdguchi said:
Well... that is what I did... was unsucccessful... imei is till missing... i have contacted jiayu support.. they said me that some phone are not able to restore IMEI in a easy way..... the ask me 18€ ( $24) aswell they ask me to pay the Shipping rates... so they could try to fix it...
Click to expand...
Click to collapse
They want to just rip money off you.. All MTK devices have only that one way of restoring device's IEMI which I have listed above., as far as I know.
You can try doing the following (This is just speculation, I have never tried this but it MAY work, as a MP0B_001 file and a backup generated by Mobileuncle MTK tools have the same output when opened via a text editor.)-
After generating an IEMI file, open it using Notepad. Then copy everything written in it, make a new notepad file and paste it there. Save that file as "IEMI.bak" file, and put that in your sd card.
Then install Mobileuncle MTK tools from Play Store, give it root access and go to IEMI backup/restore option. You should find your saved backup there. Hit restore from SD card, and pray that it works.
If it doesn't work, then I'm sorry. Send the phone over to your manufacturer if all else fails.
ViKtory36 said:
They want to just rip money off you.. All MTK devices have only that one way of restoring device's IEMI which I have listed above., as far as I know.
You can try doing the following (This is just speculation, I have never tried this but it MAY work, as a MP0B_001 file and a backup generated by Mobileuncle MTK tools have the same output when opened via a text editor.)-
After generating an IEMI file, open it using Notepad. Then copy everything written in it, make a new notepad file and paste it there. Save that file as "IEMI.bak" file, and put that in your sd card.
Then install Mobileuncle MTK tools from Play Store, give it root access and go to IEMI backup/restore option. You should find your saved backup there. Hit restore from SD card, and pray that it works.
If it doesn't work, then I'm sorry. Send the phone over to your manufacturer if all else fails.
Click to expand...
Click to collapse
well.... or Im not generaing a valid file... or it doesnt work.....:crying::crying::crying::crying::crying:
I did everything right but when I press "send AT Command" appear An error on my screen "failed to send AT command" what did I do wrong? what can I do to fix it?
How to create that MP0B_001 file ?
ViKtory36 said:
I'd suggest you re flash stock rom using SP Tools, then use SN Gen to create a MP0B_001 file. Then place the generated file on your SD card, use root explorer, copy the file you have placed on the SD card and move it to /data/nvram/md/NVRAM/NVD_IMEI/, and set the file's permission to rw-rw----.
Then reboot and enjoy.
Click to expand...
Click to collapse
How to create that MP0B_001 file please help!
Hello everyone
Please, I need help my phone "MATE 7 L09 " which i come to replace the file "oeminfo"
which the file from phone "Honor 4C" now I can't updated phone any more with any roms
Please, who owns the same phone "mt7-L09 " and have a root upload located in the following path of the file" [/device]/dev/block/platform/ff1fe000.dwmmc0/by-name/((oeminfo)) " to be able to replaced
Thank you ...
In this location there are plenty system symlinks like boot, recovery, modem, not single files. Can you enter fastboot?
gahu777 said:
In this location there are plenty system symlinks like boot, recovery, modem, not single files. Can you enter fastboot?
Click to expand...
Click to collapse
I don't try but I can root my phone again then replacing the file with the right file for mt7
You see structure of this folder, i think it cant be copied by copy/paste. Only can be flashed by img files via fastboot
gahu777 said:
You see structure of this folder, i think it cant be copied by copy/paste. Only can be flashed by img files via fastboot
Click to expand...
Click to collapse
Thats right but when I replace it with another file from honor I just doing copy and paste now I have honor logo when I switch on or restart it
So I will try replacing it can you copy and upload ?
So I just got the Aristo 3 and wanted to root it. after an extensive search I have come up empty. Does anyone know if there is a method available to use yet or maybe something is in the works? I've unlocked flashing but I cant seem to boot recovery. Any help would be greatly appreciated.
Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image
Nvitethedark said:
Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image
Click to expand...
Click to collapse
Hmm I'll give it a try. The phone is still new enough that I don't have much saved to it and if I brick it can take it back
should be able to just get the boot image may be the aristo 2 dev would pick this up since he's familiar with it I see you have a few posts in that forum maybe you can send that dev a message see if they would pick it up.
I eagerly await any progress in this run! My girlfriend cracked her screen on her Aristo 2 and decided that it was time to upgrade. I've never been disappointed in the idea of upgrading my phone...until it meant giving up my Aristoboy Mk.2(which was/is quite formidable)and rooted status along with it. If there is anything I might read about the process online, I would at very least consider the task myself. I am learning, but I have some decent skills and experience behind me. Please let me know if I can assist in any way. If not, I hope to see the first strides towards tackling this latest addition to the Aristo line!
My thanks to all my fellow devs here! You each make up a piece of the whole collection that make this, hands down the best forum/online community available the world over! Keep it up! We are making a difference in so many lives!
Your friend,
~[ProTech]~
So I've been busy as **** lately, but I found that the issue seems to be with the os more than the phone itself. I'm not that proficient with downgrading the os to a earlier version since this phone came stock with Oreo. I will try and talk to some of the devs who did the aristo 2 x210ma. Hopefully they have a solution. I've been using my 2 instead. I never realized how much you can't do with a stock phone and os.
OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks
LgPWN'd said:
OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks
Click to expand...
Click to collapse
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.
Reckless459 said:
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.
Click to expand...
Click to collapse
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...
So I have LGup, is there a difference with the dev patched one?
.
Click to expand...
Click to collapse
in answer to that YES quite a difference...
devpatched lgup gives you extra options such as Dump and Partitions-DL and Chiperase among others...
you'll NEED that dump and partitions-DL option....
LgPWN'd said:
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...ll
Click to expand...
Click to collapse
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to
Reckless459 said:
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to
Click to expand...
Click to collapse
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz
LgPWN'd said:
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz
Click to expand...
Click to collapse
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again
Reckless459 said:
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again
Click to expand...
Click to collapse
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...
@Reckless459
is there nothing further?
LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
Dude...
First off let me say MertoPCS has the biggest pile of **** customer care department. I'm still waiting on my new device to comr from the warrenty department. I did however fix the sim issue (again metro sucks leaky bowels). I will definitely post any new developments as soon as the happen.
Oh also i did a dump on another phone (aristo 2) and had no issuses. And i saw what ypu meant with the boot_COM##. Thanks for the help.
LGUP dll
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?
Nvitethedark said:
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?
Click to expand...
Click to collapse
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.
LgPWN'd said:
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.
Click to expand...
Click to collapse
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?
DOWNGRADE Don't UPGRADE
Nvitethedark said:
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?
Click to expand...
Click to collapse
If at all posible find the OLDEST firmware possible in kdz and do a full flash of that .
and try your dll mod with that by extracting the dll from said kdz and renaming to what ever the one in Common folder is and keep the UI_Config.lgl in there to keep the extra options if possible...
It's all trial and error with this stuff, so keep at it.
DO NOT flash a firmware.kdz from a different model of the device as it'll flash aboot sbl etc and you'll end with a brick that can't be fixed.
and I've always liked { in my experiments} to use the partitions DL option even when downgrading etc to be able to NOT CHOOSE the boot-stack partitions...
but give it a shot and tell us how it go's.
we may be able to split a root-bounty if we come up with something working across users
LgPWN'd said:
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...
Click to expand...
Click to collapse
reinstalled a non-patched version of lgup and used your common folder and set read-only options attempted a dump got this:
https://imgur.com/FJPMUwv