Related
Hi All, I want to continue using my AT&T prepaid plan but I recently bought a locked T-Mobile Galaxy S7 SM-G930T (I'm going to try to unlock it - if that doesn't work this is all moot). I would like to flash AT&T firmware so I can use the AT&T LTE bands. Can I follow the instructions in the link below once I've unlocked a T-Mobile SM-G930T and turn it into a SM-G930A?
http://www.droidviews.com/nougat-firmware-on-att-galaxy-s7s7-edge-sm-g930a-g935a/
I've read the link below... but it seems to be only if you want to continue using T-Mobile service which I don't.
https://forum.xda-developers.com/tm...w-to-flash-att-nougat-to-t-mobile-s7-t3553610
Changing firmware doesn't have anything to do with what bands the hardware supports. Unlock it and throw the ATT SIM in. Only difference is carrier supported features and software (wifi calling, etc). Flashing ATT modem might improve coverage but all S7 support the same bands.
Thanks buddy for the reply. I'm used to using a custom ROM on my Android phones so this is new. Mostly CyanogenMod.
That's good to know I don't need to flash in order to get the bands but I understand I need to if I want OTA updates from at&t. It seems relatively simple that you just flash the AT&T ROM over the T-Mobile with Odin and then use some update file. It doesn't even effect Samsung pay and Knox which is great.
Stupid question: is the AT&T modem included with the AT&T rom? Also, with regards to the 2nd link in the OP what is the update file that you put on the sdcard to use in recovery - is that an OTA update because your ROM is different from your carrier?
madadhd said:
Thanks buddy for the reply. I'm used to using a custom ROM on my Android phones so this is new. Mostly CyanogenMod.
That's good to know I don't need to flash in order to get the bands but I understand I need to if I want OTA updates from at&t. It seems relatively simple that you just flash the AT&T ROM over the T-Mobile with Odin and then use some update file. It doesn't even effect Samsung pay and Knox which is great.
Stupid question: is the AT&T modem included with the AT&T rom? Also, with regards to the 2nd link in the OP what is the update file that you put on the sdcard to use in recovery - is that an OTA update because your ROM is different from your carrier?
Click to expand...
Click to collapse
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
i have METROPCS Phone SM-G930T1 Nougat, already unlocked since i live in mexico...is there a international rom to flash?? i wanna convert my s7 to a non carrier rom IN ADVANCE THANKS 4 YOUR HELP!
muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
I don't get why you would do this other than to have ATT bloat over TMO bloat (IMHO TMO has less bloat than ATT). There's no technical advantage. Am I missing something?
A0425A said:
I don't get why you would do this other than to have ATT bloat over TMO bloat (IMHO TMO has less bloat than ATT). There's no technical advantage. Am I missing something?
Click to expand...
Click to collapse
The amount of bloatware is irrelevant since you can freeze all bloatware on either build. I experienced many issues on the TMo version including issues with Android Auto, Google Assistant, and Tasker. I thought these apps were buggy but all of those issues were resolved on the AT&T version. The AT&T version seems to be a better, bug-free build.
muniz_ri said:
The amount of bloatware is irrelevant since you can freeze all bloatware on either build. I experienced many issues on the TMo version including issues with Android Auto, Google Assistant, and Tasker. I thought these apps were buggy but all of those issues were resolved on the AT&T version. The AT&T version seems to be a better, bug-free build.
Click to expand...
Click to collapse
Read that in a different thread you posted to after I responded. I think it's very YMMV though. But if you saw improvement then ??
Hi, did anyone ever complete this flash from SM-G930T to SM-G930A? I'd like to do this solely to try and get the wifi calling feature since my workplace has poor cell service but great wifi. I bought the T-Mobile phone, unlocked it, put the ATT sim in and everything but wifi calling works fine. I appreciate the reply!
This is much later in the year (11-8-2021) and ATT has posted the list of phone they say will work and it only shows G930A. It seems their test of working means it must have been sold by ATT. They say My G930T won't work. So Will ATT continue to use customer's unlocked phones it they were not orginally sold by ATT. They have the records. Will ATT refuse to use one of their SIMs even if the phone is Flashed to ATT logo. I do not want to throw away my G930T phone.
muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
Hello and thank you. You posted this information and link back in 2017 and so much has changed. Mostly ATT is now working hard to get rid of all 3G towers and firing up 5G. They said my Galaxy S7-GM930T would not work so I think they link you posted will help me convert the phone back to a GM930A or U or U1. My question is,..Has anything in your post changed since 2017 and if so could you please advise me of what I need to do. Thanks very much.
trigger1937 said:
Hello and thank you. You posted this information and link back in 2017 and so much has changed. Mostly ATT is now working hard to get rid of all 3G towers and firing up 5G. They said my Galaxy S7-GM930T would not work so I think they link you posted will help me convert the phone back to a GM930A or U or U1. My question is,..Has anything in your post changed since 2017 and if so could you please advise me of what I need to do. Thanks very much.
Click to expand...
Click to collapse
They sent you a message saying the phone won't work?
I have a S7 g930V that I moved over to T-mobile service. It still has the 6.0 Marshmallow since I no longer get the Samsung updates.
Can I flash the G930TUVU4BQH7 which is the t-mobile 7.0 firmware without bricking my phone?
Dmillz713 said:
I have a S7 g930V that I moved over to T-mobile service. It still has the 6.0 Marshmallow since I no longer get the Samsung updates.
Can I flash the G930TUVU4BQH7 which is the t-mobile 7.0 firmware without bricking my phone?
Click to expand...
Click to collapse
Not only can you, but it's easily doable - I took my originally-VZW S7 (Snapdragon SoC and all) to the UnCarrier using that method.
1. Put the target S7 into download mode and grab the latest version of Odin. (You will lose your data.) Make sure you have a T-M or compatible nano SIM in the phone or no SIM at all.
2. Flash the latest SM-G930T (as in T-Mobile) firmware according to the directions.
3. The flash SHOULD be successful.
4. Restart the phone - following the new customer steps. (The setup should let you know about VoLTE. Unlike VZW, T-Mobile DOES let their MVNOs -- such as Tracfone - use VoLTE on their network; same applies to wi-fi calling.)
Both SamMobile and UPDATO have up-to-date firmware for T-Mobile S7s; the reason I prefer UPDATO is due to faster (much faster) transfer rates that do NOT require *premium* BS.
I don't see a guide/link on XDA on going specifically to 930T, just 930U. I'm also coming from 930V. Can you please provide the link?
rh71 said:
I don't see a guide/link on XDA on going specifically to 930T, just 930U. I'm also coming from 930V. Can you please provide the link?
Click to expand...
Click to collapse
The 930U steps work for 930T; the firmware choice is the only difference. The same steps apply for custom firmware based on stock (such as Project L).
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
joe3681 said:
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
Click to expand...
Click to collapse
you donnt need to remove the .md5
you will need modded odin though.
mweinbach said:
you donnt need to remove the .md5
you will need modded odin though.
Click to expand...
Click to collapse
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Thanks Joe I was tired of returning all the way back to the beginning and getting all those new updates on my unlocked S8
joe3681 said:
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Click to expand...
Click to collapse
Yeah and on a Mac you do need to, or it freezes Odin completely
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
this.guy.lol said:
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
Click to expand...
Click to collapse
No, it will not unlock the phone (Note: Verizon phones are factory unlocked and remain that way after a firmware flash)
Yes, you can flash any carriers FW to a US S8 and use it with a different carrier.
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Deleted
this.guy.lol said:
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Click to expand...
Click to collapse
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
joe3681 said:
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
Click to expand...
Click to collapse
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
this.guy.lol said:
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
Click to expand...
Click to collapse
I had a TMobile S7 edge and flashing unlocked firmware never unlocked the device. That's handled by TMobile servers so...
Flashing unlocked firmware will give you just that. The smoother, bloat free firmware from another device but not the actual sim unlock.
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
maquino1985 said:
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
Click to expand...
Click to collapse
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
twizt3d said:
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
Click to expand...
Click to collapse
Thanks. Some threads made it sound possible but inconclusive. I'll just assume it doesn't work.
BTW, can you link to the att oreo fw? And what do u flash that with Odin or comsey?
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
twizt3d said:
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
Click to expand...
Click to collapse
Ok thanks. I need to flash anyways because I'm having terrible battery issues and just debating whether to go to a newer version of 950u or back to U1 and losing WiFi calling. In your opinion is oreo beta worth it
So just to confirm, I have read everything, but I am just a bit confused. If I flashed the unlocked firmware via modified odin on a locked AT&T S8 it will remove a lot of the carrier bloat and give my my wifi hotspot back, but remove wifi calling. Similar to when I flashed the T-Mobile firmware on my AT&T S7 and got rid of a ton of the AT&T bloatware but was able to activate my wifi hotspot but lost wifi calling. I stay locked to AT&T which is fine that is not my purpose for flashing
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
and can you re-upload the link is dead now
The links don't work. Any chance you've still got the firmware? I've been overseas since october. I have an unlocked AT&T phone that I intend to keep using when I get back, so I want to keep it AT&T FW.
Hi.
I have a G955U Galaxy S8+ AT&T Factory Unlocked on Android 7.0
Baseband Version: G955USQU1AQD9
Android Security Patch Level - April 1, 2017
I no longer live in the US, and currently in the Philippines. Phone works great and the signal is too and all, but I cannot get OTA updates.
Can I just download the firmware file in this thread and flash straight through ODIN, or do I need to follow another guide?
Was on ATT, unlocked, now on T-Mobile. Phone is 3 yrs old, sketchy; shuts off randomly, has issues. Want to flash firmware, but Sammobile doesn't have 915a. Since it's unlocked and on t-mobile network, can I flash with t-mobile firmware? Can you put any carrier's rom on an unlocked phone? Sammobile has "usa" firmware with no carrier designation.
https://www.sammobile.com/firmwares/galaxy-note-edge/SM-N915R4/USC/
Thanks.
How did it go??
Same phone same problem also on Tmobile now... what did you do??
Use firmware uploaded by makki666
drivesavw said:
Same phone same problem also on Tmobile now... what did you do??
Click to expand...
Click to collapse
Did you find a solution? I flashed the firmware uploaded by makki666 found in another thread on updates for Note Edge from at&t. Right now am using 6.0.1 but may revert to basic 5.1 1 to get temporary root & get rid of bloatware (have not figured out what is worse, outdated OS or bloatware). If you found a better solution, please posr
I was wondering if it's possible to enable VoLTE on an SM-G930F running BTU firmware on an AT&T carrier. Is there any way to get things like WiFi Calling and VoLTE on it, or am I just screwed since I'm using the international variant of the phone?
When I first got it brand new from Wal-Mart, it was running TTT firmware (from Trinidad and Tobago for some reason) and showed normal 3G, 4G, and LTE symbols on my status bar. Since I wanted to get the Nougat update early, I flashed BTU which switched the symbols to H, H+, and 4G. Does that have anything to do with it?
Thanks.
You're certain it's a G930F? And from Walmart of all places? Exynos isn't meant to be sold in the US.
If it's a G930F and you have TWRP you can flash the CSC tool in the development section which has the US carriers, and CSC is what enables VoLTE.
If it's a US snapdragon model you could flash the AT&T CSC via Odin without needing TWRP.
Beanvee7 said:
You're certain it's a G930F? And from Walmart of all places? Exynos isn't meant to be sold in the US.
If it's a G930F and you have TWRP you can flash the CSC tool in the development section which has the US carriers, and CSC is what enables VoLTE.
If it's a US snapdragon model you could flash the AT&T CSC via Odin without needing TWRP.
Click to expand...
Click to collapse
If OP successfully flashed BTU then it has to be a Exynos G930F, but I agree, most phones sold in the US claiming to be the G930F are modded Snapdragons faked to look like it, but they obviously won't allow a Exynos ROM to be flashed to them, so in this case OP has got a real Exynos
Could be the modem (CP) part of the firmware controlling which carrier services you can receive in your region, not sure I'd recommend flashing a US modem to a UK firmware though, unsure what would happen, although the G930F is pretty straight forward to unbrick as long as you can get back into download mode
Beanvee7 said:
If it's a G930F and you have TWRP you can flash the CSC tool in the development section which has the US carriers, and CSC is what enables VoLTE.
Click to expand...
Click to collapse
Where is this CSC tool? I'm not sure what you mean by "development section". I have an Oreo G930F and I'm trying to get VoLTE to work with AT&T.
Feenix0 said:
Where is this CSC tool? I'm not sure what you mean by "development section". I have an Oreo G930F and I'm trying to get VoLTE to work with AT&T.
Click to expand...
Click to collapse
It hasn't been updated with the newer versions of Android so it's not really a thing anymore.
Next best thing is to download the entire firmware package for your carrier from somewhere like updato then flash only the home_CSC file. Although iirc this might now work if mixing and matching models, which is why the CSC flash tool was a thing.
Beanvee7 said:
It hasn't been updated with the newer versions of Android so it's not really a thing anymore.
Next best thing is to download the entire firmware package for your carrier from somewhere like updato then flash only the home_CSC file. Although iirc this might now work if mixing and matching models, which is why the CSC flash tool was a thing.
Click to expand...
Click to collapse
The trouble is that the G930F was never officially released on US markets, so I can't find a US firmware. I'd gladly use another market's firmware if I knew it would support AT&T VoLTE and "LTE only" mode, but I have no idea how to figure that out!
So it turns out that I have the Canadian SM-G930W8 (as shown on the download mode screen), not the G930F (as shown everywhere else). Identical hardware, but I can only flash Canadian firmware.