When I installed the CM13 using the TWRP recovery, my screen was stuck on the boot animation for long time. I to get into recovery mode by pressing Volume-up & Power button but my phone vibrated 3 times and nothing happened.
So i googled around for solution and one of the post said "clear your sd card" which i followed blindly and now that has resulted in the screen getting into "Encryption unsuccessful" screen after few seconds of boot animation. This screen also has a button to "Reset to factory " which restarts the phone but results back in the same "Encryption unsuccessful" screen. So now i have a phone with the following,
Empty/formatted SD Card
Corrupted TWRP (since the files are gone from SD Card)
Unable to enter into recovery mode (by pressing Volume-up & Power button)
How can I get my phone working again?
yash0087 said:
When I installed the CM13 using the TWRP recovery, my screen was stuck on the boot animation for long time. I to get into recovery mode by pressing Volume-up & Power button but my phone vibrated 3 times and nothing happened.
So i googled around for solution and one of the post said "clear your sd card" which i followed blindly and now that has resulted in the screen getting into "Encryption unsuccessful" screen after few seconds of boot animation. This screen also has a button to "Reset to factory " which restarts the phone but results back in the same "Encryption unsuccessful" screen. So now i have a phone with the following,
Empty/formatted SD Card
Corrupted TWRP (since the files are gone from SD Card)
Unable to enter into recovery mode (by pressing Volume-up & Power button)
How can I get my phone working again?
Click to expand...
Click to collapse
Greetings and welcome to assist. I think the safest option is to return your phone to stock first by flashing stock rom and then twrp but you could just try reflashing twrp. If you ask in the DesireHD forums the experts there will help you
http://forum.xda-developers.com/htc-desire-hd/help
Good Luck
Sawdoctor
Related
ok here is what happened yesterday
i was on ROM: codename android 3.6.0 and decided to re-install it because somehow it was force-closing applications
then went into recovery
data factory reset all
wiped cache partition
wiped dalvik cache
then wnet to install zip from sdcard
and choose Codename-Android-3.6.0-NS.zip and selected "yes"
the installation started but unfortunately was aborted. (dont know why?)
i went back and did data factory reset once again
and accidently pressed "reboot system now"
and after that it restarted and was stuck on google logo for hours . not showing any activity
i tried pulling off the battery and try to restart again and also tried going back to recovery but no luck (same old google logo boot screen)
please help me get back to recovery so that i can install a new rom ... please please help
humayooshah said:
ok here is what happened yesterday
i was on ROM: codename android 3.6.0 and decided to re-install it because somehow it was force-closing applications
then went into recovery
data factory reset all
wiped cache partition
wiped dalvik cache
then wnet to install zip from sdcard
and choose Codename-Android-3.6.0-NS.zip and selected "yes"
the installation started but unfortunately was aborted. (dont know why?)
i went back and did data factory reset once again
and accidently pressed "reboot system now"
and after that it restarted and was stuck on google logo for hours . not showing any activity
i tried pulling off the battery and try to restart again and also tried going back to recovery but no luck (same old google logo boot screen)
please help me get back to recovery so that i can install a new rom ... please please help
Click to expand...
Click to collapse
see if you have free space on your phone for the error , as for the booting in to recovery :
1.remove battery
2.reinsert baterry
3.hold volume up + power
4.chose recovery (vol up/down to scroll and pover button to select)
4.wait for phone to boot in to recovery
Fastboot boot recovery name of recovery.img
If you unlocked the right way and not some lame one click crap.
solbg said:
see if you have free space on your phone for the error , as for the booting in to recovery :
1.remove battery
2.reinsert baterry
3.hold volume up + power
4.chose recovery (vol up/down to scroll and pover button to select)
4.wait for phone to boot in to recovery
Click to expand...
Click to collapse
i have tried this procedure already but no luck .. the phone is not taking me to recovery.. when you power on while pressing the vol-up button. "Google" logo comes up and thats it .. nothing happens after that..
I scoured the forums, but have not been able to find out what I can do to solve my problem. So here it is.
I rooted my phone (to play around with some settings, what have you) and flashed TWRP recovery onto it. I got an error msg when booting up, so I decided to push an original recovery back onto the phone, because it wouldn't go to TWRP. I followed a guide (which I can't find now) to push back a stock version of recovery and it failed. My phone would boot normally just fine, but when I tried to go to recovery it would loop.
The OTA update came today, and dumbass me pressed continue (not thinking) and now I am stuck in a boot loop, and cannot get out of it.
Cannot get into recovery.
Cannot get into download mode.
Got any ideas?
Thanks
Same Problem
I have pretty much the same problem. Please help!
well without recovery/download mode working or the phone being in fastboot mode there really isn't much that can be done, you can always try to claim on warranty
boot loop
So, let me get this straight. If it failed when you tried to install the stock recovery, then you still have the TWRP recovery right?
I ran into a boot loop problem earlier when I tried upgrading TWRP. I just couldn't access my recovery so here is what I tried:
Code:
Turn your phone off.
Press volume down and power button until the LG logo comes on screen
Let go of both buttons
Hold the volume down and power buttons again until you see the "hard reset screen"
Press power once and then power again to confirm. The screen says it will reset your device but it will not as long as you have a custom recovery installed.
Your custom recovery should appear on screen.
Try the steps above and see if you can get into a recovery. Once you do maybe try resetting. Hope that helps.
So, I got my new OnePlus One today and I tried to get CM12 onto it. I was following the [GUIDE] How to Install CM12 on the OnePlus One- Android Lollipop/5.0 on the OPO forums, and everything went well until I tried to get the TWRP on there. I flashed the recovery and rebooted the phone. I turned it off and then tried to boot it into recovery but it doesn't, it just hangs at the OPO logo until I hard-restart it.
I've tried factory resetting it and doing
fastboot oem unlock
but nothing happened. The factory reset pretty much just reset the phone. I think I might've messed up the kernel. How do I fix it?
EDIT 1: I've tried reflashing twrp recoveries and nothing. When I hold power+volume down, it powers on, shows the one plus logo, then reboots and just goes to the lockscreen.
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
UPDATE 2: Apparently flashing CM12 made the recovery work. Everything works as it should and the OTA to the most recent CM12 worked perfectly.
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
I was curios and enabled advanced reboot to try and boot into recovery and it worked (after I had flashed CM12). Everything's working now.
SDCore said:
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
Click to expand...
Click to collapse
How did you manually flash CM12? I think I'm having the same trouble you were having. I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Thanks in advance for any help...
bellino13 said:
I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Click to expand...
Click to collapse
bellino13 said:
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Click to expand...
Click to collapse
Okay, I must have been having a special kind of moment - I've got TWRP 2.8.7.0 running on my handset now. I may have been holding the volume down button too long, or it may be that I was using an older version of TWRP, but I'm going to go with the former. I've also been able to successfully flash and boot into Philz 6.59.2
Having the same problem
I am having the exact same problem and cannot seem to find a solution. Recovery screen just doesn't appear, but goes to lockscreen.
Tried erasing, flashing both twrp, philz etc., but nothing works. The phone doesn't recognize the recovery status. Advanced booting does the same.
Update CM-recovery is checked off, phone is unlocked. I've followed every step of the big guide down to every detail.
Is manually flashing the 12.1 ROM the only way and in that case: is it hard for a relative newcomer?
I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.
I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...
XelaaleX1234 said:
I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...
Click to expand...
Click to collapse
What reboot problem? Is the usb cable in when your attempting to boot fastboot?
---------- Post added at 01:46 PM ---------- Previous post was at 01:45 PM ----------
shadowcliffs said:
I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.
Click to expand...
Click to collapse
Follow this guide https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985
Got the solution
After the battery was empty it booted into a little different screen wich i was able to boot from, then i downloaded the firmware and put it into dload folder on external sd. Next i force updated by holding [volume up] [Volume down] and [Power button]. Now i have a working recovery boot and Rom. Everything is stock and the bootloader is locked again.
I discovered this this morbign and didnt had time to answer earlyer sorry for that...
Someone asked because of the bootloader the only thing i got was this broken screen didnt react to my input, cable plugged in plugged out. Maby the warning screen comes before everything or there is not enough time for the timout or whatever... The important thing is that you can fix it that way!:laugh::victory:
Hello everyone. I was using a rooted stock rom with TWRP and magisk installed for my S7 and decided to encrypt it. However, after rebooting I got a message saying it was unsuccessful and that I would need to wipe the phone by pressing the button. I pressed it, the phone rebooted again and a TWRP screen showed up, with lots of errors, for about a second or two. Then, it reboots once more into the "Encryption unsuccessful" warning, and I'm stuck there. Any advice? I'll try to write down the TWRP error log, but it goes away too fast.
Update: I managed to enter download mode and flashed an updated version of TWRP (3.3.1.0). The errors are gone, but I'm still bootlooping. Can't seem to boot into twrp using Vol Up + Power + Home