Related
Hi., would you mind to help me out!!
Previusly i had cyanogenmod 9 and i was able todo simply take a screenshot by pressing the power key and system show the option to turn off reboot profiles and SCREENSHOT. When i upgrade to cm 10 by mistake i press format/boot con the recovery and now y dont have the option to take screenshots, is not the ROM as i already install the cm 9 again and it
Check within the lockscreen settings it should be there just have to enable it
Sent from my SGH-M919 using Tapatalk 2
jrrquan said:
Hi., would you mind to help me out!!
Previusly i had cyanogenmod 9 and i was able todo simply take a screenshot by pressing the power key and system show the option to turn off reboot profiles and SCREENSHOT. When i upgrade to cm 10 by mistake i press format/boot con the recovery and now y dont have the option to take screenshots, is not the ROM as i already install the cm 9 again and it
Click to expand...
Click to collapse
power+vol down
to take a shot
Tanks for the help I already check the settings and there is no option for that, key combo is not working either, previously I didn't had any problem when updating ROM that option always remains in there the only difference this time was that I perform a format/boot on recovery.
jrrquan said:
Tanks for the help I already check the settings and there is no option for that, key combo is not working either, previously I didn't had any problem when updating ROM that option always remains in there the only difference this time was that I perform a format/boot on recovery.
Click to expand...
Click to collapse
try flashing it again i'm on cm 10
.
it works fr me
HEY GUYZ...
MY frnd having HTC ONE S..
BLUETOOTH AND WIFI NOT GETTING ON... WHEN WE TRY TO ON THE WIFI... IT DOES NOT..it shows ERROR.. N BLUETOOTH TOO
PLZ HELP
phone havin STOCK ROM
boot loader UNLCOKED, ROOTED
@yogesh.kalyana
any 1 help here @NeroD @yogesh.kalyana @ceasar47
try this!
raj_singh said:
HEY GUYZ...
MY frnd having HTC ONE S..
BLUETOOTH AND WIFI NOT GETTING ON... WHEN WE TRY TO ON THE WIFI... IT DOES NOT..it shows ERROR.. N BLUETOOTH TOO
PLZ HELP
phone havin STOCK ROM
boot loader UNLCOKED, ROOTED
@yogesh.kalyana
Click to expand...
Click to collapse
Go to Settings>Wifi>Advance (top right)>Wifi Frequency band and select 2.4 HGz only.
1. Hold power button and shut down phone.
2. Once the phone is shut down, hold the volume down button then press power button for approx. 3 seconds and let go.
3. You will see a white screen, using the volume buttons for up/down and power to select: scroll to Recovery and press power. The screen should be black.
4. Now press the volume up then power button for approx. 3 seconds and you should see a black screen with blue lettering and a red triangle in the center.
5. Scroll down using the volume down and select Wipe Cache Partition. At the bottom will say Cache wipe complete in yellow.
6. Press power button selecting Reboot System Now. Phone will reboot and should be working. Try to connect to wifi.
this may delete your app data so backup everything first
by app backup and restore
yogesh.kalyana said:
Go to Settings>Wifi>Advance (top right)>Wifi Frequency band and select 2.4 HGz only.
1. Hold power button and shut down phone.
2. Once the phone is shut down, hold the volume down button then press power button for approx. 3 seconds and let go.
3. You will see a white screen, using the volume buttons for up/down and power to select: scroll to Recovery and press power. The screen should be black.
4. Now press the volume up then power button for approx. 3 seconds and you should see a black screen with blue lettering and a red triangle in the center.
5. Scroll down using the volume down and select Wipe Cache Partition. At the bottom will say Cache wipe complete in yellow.
6. Press power button selecting Reboot System Now. Phone will reboot and should be working. Try to connect to wifi.
this may delete your app data so backup everything first
by app backup and restore
Click to expand...
Click to collapse
hey bro..
sorry to say..but it did not solve the issue
well.. once earlier.....one of my friend had same issue ( WIFI AND BLUETOOTH DID NOT WORK) .. he flashed with STOCK ROM via ADB...n also some boot.img file... i dun remember..
so i ask u to plz provide STOCK ROM.... n other files which need to be flashed
OFFTOPIC!
raj_singh said:
hey bro..
sorry to say..but it did not solve the issue
well.. once earlier.....one of my friend had same issue ( WIFI AND BLUETOOTH DID NOT WORK) .. he flashed with STOCK ROM via ADB...n also some boot.img file... i dun remember..
so i ask u to plz provide STOCK ROM.... n other files which need to be flashed
Click to expand...
Click to collapse
sorry but neither i own the device or neither have the files you need please find the help in google or else look in specific device forums on XDA
hi guys
i hav a oneplus one.which is rooted with super su and twrp is installed. Recently i tried to flash Cm11s flash file using twrp. Bt after insatallation it doesn't shows anything in its screen.But when i took the phone and power it on it showing some sort of colours and it powers on. Bt only i can see a dark or some coloured portions in my display. Navigation buttons are working. But i cannot see anything in the screen rather than those colours.. touch is working. when i touced somewhere it opens the camera and the next touch took a photo. I saw the flash lightning.Also the phone doesnt shows recovery and fastboot.Only black colours and some moving colours are present.
What happened to my phone?
How to make it into normal working condition?
please say your valuable opinions.
Contact : [email protected]
post a pic of the screen.
I fixed my responsive-black-screen[happened after flashing cm11s] by flashing persist.
cjl bny said:
hi guys
i hav a oneplus one.which is rooted with super su and twrp is installed. Recently i tried to flash Cm11s flash file using twrp. Bt after insatallation it doesn't shows anything in its screen.But when i took the phone and power it on it showing some sort of colours and it powers on. Bt only i can see a dark or some coloured portions in my display. Navigation buttons are working. But i cannot see anything in the screen rather than those colours.. touch is working. when i touced somewhere it opens the camera and the next touch took a photo. I saw the flash lightning.Also the phone doesnt shows recovery and fastboot.Only black colours and some moving colours are present.
What happened to my phone?
How to make it into normal working condition?
please say your valuable opinions.
Contact : [email protected]
Click to expand...
Click to collapse
On which rom you were before?
Mr.Ak said:
On which rom you were before?
Click to expand...
Click to collapse
was CM12
now its CM11s
bablu048 said:
post a pic of the screen.
I fixed my responsive-black-screen[happened after flashing cm11s] by flashing persist.
Click to expand...
Click to collapse
i dnt knw how to insert a pic in this medium..so heartly sorry.. my mail is [email protected]
kindly be in touch with me. im messed up..
Use WuFresh root kit to back to stock. you only have to boot into fastboot mode. That is from complete power off, press power+ volume up button to get to fastboot mode.
hope that help
cjl bny said:
was CM12
now its CM11s
Click to expand...
Click to collapse
Why don't you use fastboot package? Just skip flashing "userdata" if want to save internal storage from formatting.
androidarmy said:
Use WuFresh root kit to back to stock. you only have to boot into fastboot mode. That is from complete power off, press power+ volume up button to get to fastboot mode.
hope that help
Click to expand...
Click to collapse
how to use that root kit?
download it from here
http://www.wugfresh.com/brt/
I have a big problem with my galaxy S8 plus, at the beginning I had a problem with the bootload after having made the last update, my phone reboot constantly (bootloops), then I flashed it with Odin, and I get another problem, after the flash the systems update stops at 32% ===== erasing then it restarts again, I even tried the PIT flash method it does not work
malek160 said:
I have a big problem with my galaxy S8 plus, at the beginning I had a problem with the bootload after having made the last update, my phone reboot constantly (bootloops), then I flashed it with Odin, and I get another problem, after the flash the systems update stops at 32% ===== erasing then it restarts again, I even tried the PIT flash method it does not work
Click to expand...
Click to collapse
S8+ has at least two major variants,
Qualcomm and Exynos.
Might be helpful if you can advise of your model number and also which version of Odin and which Samsung firmware you're trying to flash
malek160 said:
I have a big problem with my galaxy S8 plus, at the beginning I had a problem with the bootload after having made the last update, my phone reboot constantly (bootloops), then I flashed it with Odin, and I get another problem, after the flash the systems update stops at 32% ===== erasing then it restarts again, I even tried the PIT flash method it does not work
Click to expand...
Click to collapse
When Odin is done flashing a firmware on the S8 or S8+, it will always boot the phone into recovery, install the update to 32%, say "Erasing", then reboot like normal. After that, it should boot straight into Android. If you are having problems with it not booting into Android, it sounds like there is a bigger problem.
man i think ur battery is discharged charge it overnight after flashing....will work surely
try to boot into recovery and wipe there then turn off then download mode, flash again and see what happened, if still happens force power off then turn on and see if still goes into bootloop
Sorry for bumping but did you found a fix? I'm having the same issue.
Whoops, I was impacient. A wipe fixed this.
Hello, the same thing happened to me and I solved it this way:
Flash firmware with odin when restarting will get stuck in 32% and error will go out, enter the native recovery and make wipe data factory reset and then restart the phone. When you turn it on again, the screen may freeze, you just have to force the restart. That worked for me, I hope it works for them.
Samsung galaxy s7 edge - SM-G935F BTU model UK Model Factory Unlocked
I have the same issue. Flashed firmware with ODIN. Rebooted phone got to 32% update then erasing then just stuck on the samsung logo. Pressed volume up and home cannot get into recovery mode to factory reset or wipe cache. Rebooted again with volume down and power of and home button. Now the blue light is on and the go back and two boxes buttons on. Any can resolve? cheers
---------- Post added at 01:09 PM ---------- Previous post was at 01:05 PM ----------
Alfredoban: how did get into native recovery and force restart when the phone freezes?
Did Someone manage to fix this?
alfredobalan said:
Hello, the same thing happened to me and I solved it this way:
Flash firmware with odin when restarting will get stuck in 32% and error will go out, enter the native recovery and make wipe data factory reset and then restart the phone. When you turn it on again, the screen may freeze, you just have to force the restart. That worked for me, I hope it works for them.
Click to expand...
Click to collapse
dars2 said:
Did Someone manage to fix this?
Click to expand...
Click to collapse
Thanks to alfredobalan for the hint.
This is how i resolved it for my Samsung Note8.
Connect phone to charger.
Now press and hold volume down, bixby and power button at same time.
Release after u see a blank screen.
Now phone will start displaying charging percent circle.
Now u can remove the phone from charger.
Now press volume up, bixby and power button at same time.
Phone will reboot, leave power button but keep holding other 2 buttons.
After you see android/system update installing screen, leave these 2 buttons
Wait for few seconds and phone will show no update and then will show recovery menu.
with volume keys go to "wipe cache" and press power key.
after that select "wipe data/reset" and press power key.
after that select reboot phone and press power key
now phone will go to Samsung logo screen and you may think that it is again stuck in bootloop
But no, wait for some time->for me it was less than 4-5 min
and you will see the installing apps and other messages on screen
ik2019 said:
Samsung galaxy s7 edge - SM-G935F BTU model UK Model Factory Unlocked
I have the same issue. Flashed firmware with ODIN. Rebooted phone got to 32% update then erasing then just stuck on the samsung logo. Pressed volume up and home cannot get into recovery mode to factory reset or wipe cache. Rebooted again with volume down and power of and home button. Now the blue light is on and the go back and two boxes buttons on. Any can resolve? cheers
I have the same problem with this. I tried hard but not working. Struck on Bootloop. tried to followed the below steps also but not success. Any suggestion please?
I checked 'nand-erase' while flashing the stock rom? How can I get back my Tablet (SM-T385) Please help.
Click to expand...
Click to collapse
gotiyaa said:
thanks to alfredobalan for the hint.
This is how i resolved it for my samsung note8.
connect phone to charger.
now press and hold volume down, bixby and power button at same time.
release after u see a blank screen.
now phone will start displaying charging percent circle.
now u can remove the phone from charger.
now press volume up, bixby and power button at same time.
phone will reboot, leave power button but keep holding other 2 buttons.
after you see android/system update installing screen, leave these 2 buttons
wait for few seconds and phone will show no update and then will show recovery menu.
with volume keys go to "wipe cache" and press power key.
after that select "wipe data/reset" and press power key.
after that select reboot phone and press power key
now phone will go to samsung logo screen and you may think that it is again stuck in bootloop
but no, wait for some time->for me it was less than 4-5 min
and you will see the installing apps and other messages on screen
Click to expand...
Click to collapse
wow... Works fine. Thank you.
pls help
i tried all of the above but still dont work after i followed the wipe cache then wipe data and reboot it goes back to black screen and when i plug my charger it stuck on charging circle screen
The only way what solved the problem for me: Start ODIN as system administrator. I still received the system update and erase screens, but after a half minute the tablet started normally ith "optimizing apps" screen. Hope it will help anybody if nothing above.
malek160 said:
I have a big problem with my galaxy S8 plus, at the beginning I had a problem with the bootload after having made the last update, my phone reboot constantly (bootloops), then I flashed it with Odin, and I get another problem, after the flash the systems update stops at 32% ===== erasing then it restarts again, I even tried the PIT flash method it does not work
Click to expand...
Click to collapse
mano tbm tava cm isso cm o j7 pro fiz de tudo e n consegui
ai resolvi pegar so o arquivo AP da rom e instalar e iniciou d boa espero ter ajudado
Translated by GT:
bro, i had it with the j7 pro, i did everything and i couldn't
then I decided to just take the AP file from the rom and install it and started it, I hope I helped
Mano tinha feito de tudo instalei rom umas 10 vezes e n consegui procurei videos e nd ai resolvi instalar apenas o arquivo AP da rom original dei start e pronto o celular J7 pro iniciou normalmente
Translated by GT: Mano I had done everything I installed the rom about 10 times and I couldn't look for videos and then I decided to install only the AP file of the original rom I started and that's it, the J7 pro cell started normally
@leonthekill
As a courtesy, I have translated your last 2 posts. Please be observant and respectful of XDA Rule #4 for all of your future posts:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Click to expand...
Click to collapse
Thank you: Badger50 FSM
im still stuck, S8+ SM-g955FD i get to recovery sometimes and get this
File-Based OTA
Supported API: 3
E: unknown volume for path [/odm]
E: unknown volume for path [/vendor]
E: unknown volume for path [/odm]
E: unknown volume for path [/vendor]
# MANUAL MODE v1.0.0#
can't open directory '/system/omc/SUP/etc/sysconfig' . (No such file or directory)
can't open directory '/system/omc/SUP/etc/cid/sysconfig' . (No such file or directory)
can't open directory '/system/omc/SUP/etc/permissions' . (No such file or directory)
E:[libfs_mgr]is_dt_compatible(): firmware info
Any ideas?
Thx in Advanced.
Alons13 said:
im still stuck, S8+ SM-g955FD i get to recovery sometimes and get this
File-Based OTA
Supported API: 3
E: unknown volume for path [/odm]
E: unknown volume for path [/vendor]
E: unknown volume for path [/odm]
E: unknown volume for path [/vendor]
# MANUAL MODE v1.0.0#
can't open directory '/system/omc/SUP/etc/sysconfig' . (No such file or directory)
can't open directory '/system/omc/SUP/etc/cid/sysconfig' . (No such file or directory)
can't open directory '/system/omc/SUP/etc/permissions' . (No such file or directory)
E:[libfs_mgr]is_dt_compatible(): firmware info
Any ideas?
Thx in Advanced.
Click to expand...
Click to collapse
I am also having this problem. please help us
Same here, but with normal S8...
Someone got it working?
Tried to press power+volume up, doesn't work. Is there any other way?
tainka said:
Tried to press power+volume up, doesn't work. Is there any other way?
Click to expand...
Click to collapse
connect to computer while doing and it works
You can boot into recovery without having to plug into a computer by holding power + volume up, and then once you get to the "this device is unlocked, press power key to continue" screen, rather than just waiting for that screen to disappear, press the power key and then you should be taken to recovery... at least, that's how I was able to do it
ShotSkydiver said:
You can boot into recovery without having to plug into a computer by holding power + volume up, and then once you get to the "this device is unlocked, press power key to continue" screen, rather than just waiting for that screen to disappear, press the power key and then you should be taken to recovery... at least, that's how I was able to do it
Click to expand...
Click to collapse
Its an issue after latest update, so we have to connect to PC and then Power + Vol Up
inningsdefeat500 said:
Its an issue after latest update, so we have to connect to PC and then Power + Vol Up
Click to expand...
Click to collapse
Ah gotcha, that makes sense, I've never been able to get recovery booting via power + volume up, until I randomly tried pressing the power button at the device unlocked screen, and for some reason doing that took me into recovery
ShotSkydiver said:
Ah gotcha, that makes sense, I've never been able to get recovery booting via power + volume up, until I randomly tried pressing the power button at the device unlocked screen, and for some reason doing that took me into recovery
Click to expand...
Click to collapse
What is the unlocked screen? Never saw this
Are you powering off your phone first? If so wait a few seconds after then hold down both power + volume up buttons at the same time and hold for 10 seconds. It still works for me doing it this way.
xfaega said:
Are you powering off your phone first? If so wait a few seconds after then hold down both power + volume up buttons at the same time and hold for 10 seconds. It still works for me doing it this way.
Click to expand...
Click to collapse
Yes, I tried a few times when phone is off. But it butting up like always to the os.
Volume Up + Power, Splash Screen, Continue pressing the volume up button works for me..
tainka said:
Yes, I tried a few times when phone is off. But it butting up like always to the os.
Click to expand...
Click to collapse
Try this. Hold the volume up button first then the power button. See if this will work.
Thanks, i succeeded with the cable method
edwardob said:
connect to computer while doing and it works
Click to expand...
Click to collapse
Oh man!! you saved my life!! Lots of thanks.
Very helpful!
edwardob said:
connect to computer while doing and it works
Click to expand...
Click to collapse
This works like a charm. I was about to give up my phone because of this predicament, I didn't want to have any issues restoring my phone in the future in case. THANKS A BUNCH!
It's kinda strange but it is bootloader issue. I am on BTK3 firmware (latest Android 10 release) and i'm experiencing such misbehave of key-kombo to enter ot recovery mode since September or October FW update. Has jus tried to downgrade bootloader to initial firmaware (ATGM) by flashing BL in odin and now i can enter recovery by only pressing vol-up + bixby. It work always. Cables, headphones... nothing needed. just keys-combo.
Then i tried to update BL to latest Android 10 (BTK3) and again recovery mode doesn't work. Only if N9860 connected to PC by cable and even with that it doesn't work for me 10 out of 10 times.
Can someone text/call Samsung support to report this issue ?
BTW thanks to @Mentalmuso for helping me!
Same things happen to Android 11.
Tried to flash on my N9860 old BL over Android 11 firmware (was installed before that, all files AP, BL, CP, CSC), flash was ok, but system was unable to load. constantly bootloops. but i was able again to enter recovery without cable and etc. Tried to wipe cache and factory reset from default recovery but no luck - bootloop.
I thought that game over and old BL is not compatible with new android 11.
But then i wanted to try do the same but with custom binaries (@Mentalmuso TWRP and kernel) and ta-da - system loaded from the first try. For me it's surprise. Now i have Android 11 latest FW for TGY (CUA3) with initial BL from the box (ATGM) and everything looks like working fine. No error in OS, no random reboots (at least after 30 minutes of test) and recovery can be simply loaded only by key combo, without any cables, headphones and PC.
I'm happy now =)
Strange thing is that after fladhing old BL system did not show error message that vbmeta changed and some error in vbmeta header. It was showed always on Android 10. But i flashed twrp again (it has vbmeta inside .zip) to be safe lol.