It's Dangerous and will brick your phone without any way out.... !!!
I Flashed my mate 8 with phoenix the 2nd method
and I trusted what THEY said that i will get back the imei and network signal by using the HCU which never happen now it's more than one month trying everything spend more than 50$ without any results
my phone is nxt-al10 everything is set perfect it's even receive OTA update but no signal!!!
NO ANSWER TO MY REQUESTS TO THEM OVER THE CHAT OR GSM FORUM
Do this
1) unlock bootloader
2) Falsh your region OEM info via SRH tool.
3) then reboot
Enjoy
bluheart said:
Do this
1) unlock bootloader
2) Falsh your region OEM info via SRH tool.
3) then reboot
Enjoy
Click to expand...
Click to collapse
As reported in 3 other threads to you, it does not work.
Many people are facing this issue and till now there is no solution to this.
Sent from my A0001 using Tapatalk
bluheart said:
Do this
1) unlock bootloader
2) Falsh your region OEM info via SRH tool.
3) then reboot
Enjoy
Click to expand...
Click to collapse
this didn't work
Are you on Nougat?
No marshmallows
I think I need original factory image
monos111 said:
I think I need original factory image
Click to expand...
Click to collapse
Factory Image won't work unfortunately...I purchased a stock image of my Phone. But made the mistake of using one of the DGTKS files that was closest to my L09 model as instructed in the unbrick method (METHOD 2) I succeeded in unbricking my phone and then flashing my Factory Image but lost my imei & serial...so I used HCU to reinstate my imei etc and managed to get a very week signal that would cut out as soon as you went inside or jumped in the car.
Nothing I tried worked ( flashed modem img etc) I had the phone back to out of the box state ( Bootloader locked ...stated in Fastboot ) but weak signal. I took it back to the manufacturer who didn't seem to detect that I had mucked around with the firmware and replaced the motherboard under warranty.
I was given a second chance and dodged an expensive bullet.....I havn't even unlocked the bootloader on the replacement phone.
XDA site needs to warn people to stay away from this method (method 2) If I ever was stupid enough to brick my phone again, I would use the Phoenix tool only to flash my own firmware and never their modified DGTKS files which I can concur that the NXT files for the mate 8 have all been removed from their supported firmware list.
As i tel to other people , you need to erase modemnvm_factory / modemnvm_system / modemnvm_backup partions and to flash them with a partions comming from a full working mate 8
Tested and worked my mate 8 work correctly now
But sorry for all who wait for solution i can't share this files it's the choice of the person who helped me to do this and they have right
I will do my possible to try to help you all as soon as possible
makabress said:
As i tel to other people , you need to erase modemnvm_factory / modemnvm_system / modemnvm_backup partions and to flash them with a partions comming from a full working mate 8
Tested and worked my mate 8 work correctly now
But sorry for all who wait for solution i can't share this files it's the choice of the person who helped me to do this and they have right
I will do my possible to try to help you all as soon as possible
Click to expand...
Click to collapse
I hope you can help me, As you know how sadly is it.:crying:
Please explane how to erase them and how to flash the right ones.
thank you
monos111 said:
I hope you can help me, As you know how sadly is it.:crying:
Please explane how to erase them and how to flash the right ones.
thank you
Click to expand...
Click to collapse
For the moment i used dc-pheonix and xml scrypt that i have edited from an original factory rom unpacked not like the one in dc unocker
Edited it to erase and write the new partions only
But the right partions have to be dumped from a fully working mate 8 and than flashed to your bricked one
I will try to create a free solution soon to do not have to pay again dc unlocker
makabress said:
For the moment i used dc-pheonix and xml scrypt that i have edited from an original factory rom unpacked not like the one in dc unocker
Edited it to erase and write the new partions only
But the right partions have to be dumped from a fully working mate 8 and than flashed to your bricked one
I will try to create a free solution soon to do not have to pay again dc unlocker
Click to expand...
Click to collapse
Mate, anxious to get the phone working again. Will you please share the solution.. [emoji52] [emoji52] [emoji52]
Sent from my HUAWEI NXT-L29 using Tapatalk
what is that phoenix you are all been talking about? please post the link so the warning is clear.
all i hear is phoenix is dangerous yes i believe it since they are not real animal
sozofriend1234 said:
Mate, anxious to get the phone working again. Will you please share the solution.. [emoji52] [emoji52] [emoji52]
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
i have just a few to test to done and i will share the solution
makabress said:
i have just a few to test to done and i will share the solution
Click to expand...
Click to collapse
Fantastic, I hope you succeed I really missed my Phone
erwinsie said:
what is that phoenix you are all been talking about? please post the link so the warning is clear.
all i hear is phoenix is dangerous yes i believe it since they are not real animal
Click to expand...
Click to collapse
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
makabress said:
i have just a few to test to done and i will share the solution
Click to expand...
Click to collapse
Thanks a lot for your Mate. You rock. It worked.
sozofriend1234 said:
Thanks a lot for your Mate. You rock. It worked.
Click to expand...
Click to collapse
Happy for you , but i have to find a working solution for everyone,and than try to find a solution for my g8 too (if any one can dump all g8 partition pls tel me )
Thank you
Related
Hi all , just joined xda-developers but i spend straight 14 hours trying to fix this DAMM photon q yesterday
all i got in the end is a normal boot after following this http://forum.xda-developers.com/showthread.php?t=2001108
BUT at the startup , the screen comes like for a millisecond and then this " starting services" logo doesn't go at all...it just continues forever
any help would be appreciate .
Can you explain what your setup is, and exactly what you've done to get where you are?
For example, you were bootloader official unlocked, on CWM and asa-10, etc.
Thanks.
arrrghhh said:
Can you explain what your setup is, and exactly what you've done to get where you are?
For example, you were bootloader official unlocked, on CWM and asa-10, etc.
Thanks.
Click to expand...
Click to collapse
bootloader is not qaulified for official unlock... and its my friends phone so he gave to me since he was unable to use it.. i thought i could give it life again.. so...i don't what esle info you want but i did EXACTLY what that thread told me to do... and still the that thing does not go ..
tune345 said:
bootloader is not qaulified for official unlock... and its my friends phone so he gave to me since he was unable to use it.. i thought i could give it life again.. so...i don't what esle info you want but i did EXACTLY what that thread told me to do... and still the that thing does not go ..
Click to expand...
Click to collapse
Still doesn't tell me what you've done, what state the phone is actually in, etc.
I thought my question was pretty straightforward. Unless you provide more detail, I don't know how anyone will be able to help you.
Is this a stolen device? Why is it not qualified for the official unlock? Either way, how does that play into what's wrong with the device?
Did you have custom recovery on it? Give some details!!!
arrrghhh said:
Still doesn't tell me what you've done, what state the phone is actually in, etc.
I thought my question was pretty straightforward. Unless you provide more detail, I don't know how anyone will be able to help you.
Is this a stolen device? Why is it not qualified for the official unlock? Either way, how does that play into what's wrong with the device?
Did you have custom recovery on it? Give some details!!!
Click to expand...
Click to collapse
i think i am a noob at explaining things but let me try again...i don't know the exact history of this phone , my friend gave it to me yesterday and its not stolen ... he paid his insurance every month but then who know what he did... i have no idea why its not qaulified for the official unlock probably because he bought a new phone on the same line so the company deactivated this phone..
ok so when i got the phone yesterday , the bootlocker logo appeared and i was unable to do anything ...then i installed CWMrecovery and it was successfull and then i installed every possible rom available online as far as i know but same thing happened with all of them ..... successfully installed , it reboots and little square thing saying " starting services..." and then it does not go away at all ... but at the same time i am able to bring the top menu ..and go to the settings and everything from there but i can't go to home screen since ...it is black and is occupied by "starting services.."
so finally i came accross this thread for master reboot and i followed it ....i installed TWRrecovery and made backup and then restored a backup providers by that guy ... i flashed new stock recovery after that... so following his thread , he told that if all went successful ... it will return to original stock
and now i am at the same screen as previous... " starting serivces..." my friend told me he tired to root it and he messed up really bad ..so i believe there is still some old files in the internal storage from previous rom versions.... but i deleted everything......wiped, data facotry reset and then
installed a clean backup provided by the thread starter...... and everyone else had success except me ...
i hope i answered your questions if not .. i would aprreciate if you tell me what exactly you want to know ..... thanks
i also tired every US ROMS from here http://sbf.droid-developers.org/asanti_c/list.php
and all of them showed " starting services.." after i installed them from sdcard using CWMrecovery.
we have full RSD lite backups now to restore a phone can be found in this thread
http://forum.xda-developers.com/showthread.php?t=2095536 i think some xml editing is required tho but it explained it in the thread. that will erase everything on the phone and restore it to complete stock minus unlocked bootloader
Rangerbry said:
we have full RSD lite backups now to restore a phone can be found in this thread
http://forum.xda-developers.com/showthread.php?t=2095536 i think some xml editing is required tho but it explained it in the thread. that will erase everything on the phone and restore it to complete stock minus unlocked bootloader
Click to expand...
Click to collapse
i tried that but m getting confused which commands to delete and how to delete them........because its in the zip
tune345 said:
i tried that but m getting confused which commands to delete and how to delete them........because its in the zip
Click to expand...
Click to collapse
You have to extract the files and edit the xml file. And you use rsdlite on your pc phone connected thru usb to write it to the phone
Sent from my GT-N8013 using Tapatalk HD
Rangerbry said:
You have to extract the files and edit the xml file. And you use rsdlite on your pc phone connected thru usb to write it to the phone
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
ok i will do it right now...give me 1 minute
Woooooooooooooooooooooooooooooooo ..... DUDE YOU SAVED ME FROM GOING INSANE lol ....thanks
its working now ... i did that yesterday but my dumbass was choosing the whole zip file without extraction haha...
but the questing is which is the lastest update for it ??
If you installed the asa-14 then it should be. Make sure you flash the right one dont flash the us cellular unless thats what you have
Sent from my GT-N8013 using Tapatalk HD
Rangerbry said:
If you installed the asa-14 then it should be. Make sure you flash the right one dont flash the us cellular unless thats what you have
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml
i installed that one... can i make over the air update on it ... and is this like stock rom ... everything will work ..hdmi ..wifi ??
tune345 said:
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml
i installed that one... can i make over the air update on it ... and is this like stock rom ... everything will work ..hdmi ..wifi ??
Click to expand...
Click to collapse
You should be able to and everything should function its a complete stock just as sprint flashed it
Sent from my GT-N8013 using Tapatalk HD
is there any other way around for bootlocker ...without official ??
Thank you so much Rangerbry.........
If you Flashed CWM and TWRP your bootloader is already unlocked
Rangerbry said:
If you Flashed CWM and TWRP your bootloader is already unlocked
Click to expand...
Click to collapse
This.
Glad you got it workin with RSD lite.
Alright thank you .....all of you guys..
I meant to say remove the boot locker screen at startup ....
Another question is can i reactivate in sprint ?
tune345 said:
Alright thank you .....all of you guys..
I meant to say remove the boot locker screen at startup ....
Another question is can i reactivate in sprint ?
Click to expand...
Click to collapse
For bootlogos: http://forum.xda-developers.com/showthread.php?t=1873834
Reactivate in Sprint? What do you mean? Only Sprint can tell you whether the phone can be activated or not. Call them. Not sure why you would even worry about that if it's not stolen.....
Ok I think I will go in store and see what happens...
Ok I have this anither problem now....batteryy life is very short..I charged in the morning and after straight 3 hours.of use its out ..from 96 ,%
M looking into market ...can someone throw some light on battery calibration ...mine phone is not rooted
Sent from my XT897 using xda app-developers app
Hi all
first of all, i am a noob as I have not been using android for years.
This is the stupid thing I have done so far. let me start the story on how I get this phone.
1. I bought it for 2nd hand, and noticed it has installed with the 'fake' nougat rom http://forum.xda-developers.com/p8max/general/android-nougat-p8max-t3492952
2. I check the phone it's shows not rooted.
3. It come with TWRP.
4. the Model is DAV-701LV100R001C209D305 ( do I need to download the exact same rom? I can't find it anywhere)
5. I wiped out everything including internal memory. and the phone now looping at the 'Huawei logo'
5. So I wanted to restore back to the original rom and downloaded some rom from Huawei website for 701L, when I press the +,- and power button it shows fail, some incapability things....
what shall I do now? I really lost now. please help!!!.. I just need a working phone:crying::crying::crying:
The problem is that there a no full ROM for this device so you cant forceupdate it.
Hirs_E_Fruit said:
The problem is that there a no full ROM for this device so you cant forceupdate it.
Click to expand...
Click to collapse
what can I do now? what rom do I need to get to save my phone?
A European ROM with CUST C209.
Hirs_E_Fruit said:
A European ROM with CUST C209.
Click to expand...
Click to collapse
Do you have a link for me, thank you..:angel::angel::angel:
There is no such link, cause the 701L doesnt get much support.
Hirs_E_Fruit said:
There is no such link, cause the 701L doesnt get much support.
Click to expand...
Click to collapse
So this phone is officially dead?
I think the only thing maybe could work is that you put a universal CUST on it and flash a "normal" ROM on it than.
any help???? i am lost
Hirs_E_Fruit said:
I think the only thing maybe could work is that you put a universal CUST on it and flash a "normal" ROM on it than.
Click to expand...
Click to collapse
I flashed the universal cust, and a thailand rom ...it stop at 5% and shows fail
zpaq said:
I flashed the universal cust, and a thailand rom ...it stop at 5% and shows fail
Click to expand...
Click to collapse
yes because u need to do first some kind of rollback like in my thread is posted to get it work i think, but i am not sure
Ok, after contacting the seller, finally I got it resolved. phone back to life..
What was the solution, which steps did it require to reanimate the device?
zpaq said:
Ok, after contacting the seller, finally I got it resolved. phone back to life..
Click to expand...
Click to collapse
whats the solusion for the problem i have same problem
Guys please. i helped a lot of you. and now i need help.
i CANT downgrade ... please someone...
EGOiST1991 said:
Guys please. i helped a lot of you. and now i need help.
i CANT downgrade ... please someone...
Click to expand...
Click to collapse
You tried rollback method? What's your model ?
hamadazh said:
You tried rollback method? What's your model ?
Click to expand...
Click to collapse
L-29 C432...
i flashed b560 and had NRD Test key, so i flashed update_eu.zip and have c432b560
so rollback dont worked with c432....
Now i have test keys again because i used the dc phoenix tool. (my phone was bricked after i tried to flash cust with srk tool for other cust version on b560)
what should i do?
all my twrp backups dont work...
i still have 3days left with the dc phoenixtool (15credits) so maybe this can help
EGOiST1991 said:
L-29 C432...
i flashed b560 and had NRD Test key, so i flashed update_eu.zip and have c432b560
so rollback dont worked with c432....
Now i have test keys again because i used the dc phoenix tool. (my phone was bricked after i tried to flash cust with srk tool for other cust version on b560)
what should i do?
all my twrp backups dont work...
i still have 3days left with the dc phoenixtool (15credits) so maybe this can help
Click to expand...
Click to collapse
when I update my mate 8 to b560 ,, i was on b320 ,,,
and because there is on rollback for C432.....
So I just did dload update using firmware for b320 and when update finished i made factory reset and done ,,,
and I back for b320
I hope that is useful for you ,,,
Same here I tried to be back to b200 after failing to root b560.....After many tries, I had to resort to DC Unlocker ( paid around 19 Euros), then afterwards, My phone is dead (No power working, No PC recognising phone ) Now, it is at the mercy of at technician to find a solution, otherwise I will get a new one (SAM S 8)
I got back to b192! There is only ONE method that worked for me. And only ONE rollback update.app that also worked. But cant find the link anymore.
I had to flash my rom to get Testkeys then rollback via the upload.app ( i will post a link later) and finally was able to do it. after 15€, bc my phone was dead before also
https://www.hidrive.strato.com/lnk/0mlDFqqy
only file that worked for me
thread can be closed [Solved]
I can help DC Phoenix
hi EGOiST1991
i want to know that the dc phoenix worked on your device??? i mean did it really unbricked your device? Please reply as soon as you read this!!
Thanks
EGOiST1991 said:
I got back to b192! There is only ONE method that worked for me. And only ONE rollback update.app that also worked. But cant find the link anymore.
I had to flash my rom to get Testkeys then rollback via the upload.app ( i will post a link later) and finally was able to do it. after 15€, bc my phone was dead before also
Click to expand...
Click to collapse
Thanks but what do you mean by "dead".. is it like my case? no power or pc working... service told me that I have to replace the motherboard...
---------- Post added at 06:49 PM ---------- Previous post was at 06:35 PM ----------
hash26 said:
hi EGOiST1991
i want to know that the dc phoenix worked on your device??? i mean did it really unbricked your device? Please reply as soon as you read this!!
Thanks
Click to expand...
Click to collapse
my advice is never to try the second method at all (if you visit their site, you find two methods for unbricking your mobile) ... I totally killed my device... The first method might work... but I don't trust them as after my phone became dead, I tried to explain what happened on their forum but they deleted my registration and the tread...Although some members tried to help....
basimzanaty said:
Thanks but what do you mean by "dead".. is it like my case? no power or pc working... service told me that I have to replace the motherboard...
---------- Post added at 06:49 PM ---------- Previous post was at 06:35 PM ----------
my advice is never to try the second method at all (if you visit their site, you find two methods for unbricking your mobile) ... I totally killed my device... The first method might work... but I don't trust them as after my phone became dead, I tried to explain what happened on their forum but they deleted my registration and the tread...Although some members tried to help....
Click to expand...
Click to collapse
Are your Honor 8 still dead? I used first method yesterday with 2 steps and work fine to revive a device that only had fastboot mode. In the Second Method I didn't find a factory firmware for Honor 8 in DC website.
rafaelcantarela said:
Are your Honor 8 still dead? I used first method yesterday with 2 steps and work fine to revive a device that only had fastboot mode. In the Second Method I didn't find a factory firmware for Honor 8 in DC website.
Click to expand...
Click to collapse
I have Mate 8...and still dead...service told me I must change mother board...nearly the same price as purchacing a new one...of course I refused and went back to my Sam Note 4....The second method in DC is so dangerous as they do not specify the correct firmware to your mobile and if you chose a wrong one, it would ruin your device...
basimzanaty said:
I have Mate 8...and still dead...service told me I must change mother board...nearly the same price as purchacing a new one...of course I refused and went back to my Sam Note 4....The second method in DC is so dangerous as they do not specify the correct firmware to your mobile and if you chose a wrong one, it would ruin your device...
Click to expand...
Click to collapse
Ok I just went through this i upgraded to nougat them tried to downgrade and bricked wouldn't do any thing every time i would flash with DC Phoenix it would reboot to stock recovery so used method 2 I chose a file that was nxt something I have to check on comp but it worked but it's just a basic ROM I guess to boot so I booted again to fastboot then used method 1 with my firmware update.app and bam it worked hope this helps
michael0617 said:
Ok I just went through this i upgraded to nougat them tried to downgrade and bricked wouldn't do any thing every time i would flash with DC Phoenix it would reboot to stock recovery so used method 2 I chose a file that was nxt something I have to check on comp but it worked but it's just a basic ROM I guess to boot so I booted again to fastboot then used method 1 with my firmware update.app and bam it worked hope this helps
Click to expand...
Click to collapse
For me, I also used ths second way ...but after flashing the files they proposed on their site....I had my phone dead.....totally dead...with power NOT WORKING...and not been recognized by pc....and nobody could get it back to life...????
basimzanaty said:
For me, I also used ths second way ...but after flashing the files they proposed on their site....I had my phone dead.....totally dead...with power NOT WORKING...and not been recognized by pc....and nobody could get it back to life...????
Click to expand...
Click to collapse
Which file u flash?
I think it was 2 months ago....the problem is that they mentioned that if you could NOT find the same firmware of your phone, take the nearest firmware....and That was what I did.....but it is alright as I went back to my old SamSung Note 4 ....till I get Note 8....
Can anyone help?
I'm trying to use TWRP to install FRD-L14C567B385 onto a rom which just read as "test keys".
I get the following error.
http://imgur.com/a/7u6dj
Any help? I've been struggling without a phone for days.. need it for school work and all. :crying:
coolest35 said:
Can anyone help?
I'm trying to use TWRP to install FRD-L14C567B385 onto a rom which just read as "test keys".
I get the following error.
http://imgur.com/a/7u6dj
Any help? I've been struggling without a phone for days.. need it for school work and all. :crying:
Click to expand...
Click to collapse
Well u messedup with ur phone .
Find a roll back package and download full update.app of L14 and install it with three buttom combination
Rommco05 said:
Its little bit funny how many people have problem with rollback packages. Where you think is problem, in rollback packages or in low information about procedures, maybe low experience of each user...?
Click to expand...
Click to collapse
Its easy bro . Everyone gets this issue just beacuse of the lack of proper investigation.
It is even easy to revert to previous version when u do a good research in xda .
Rommco05 said:
mmm thats true...
Click to expand...
Click to collapse
Quote me when u need a help . We here in xda care for sharing :highfive:
I did rollback once and it end up with bootlop, had to use 3rd app to fix it.
netvorCZEK said:
I did rollback once and it end up with bootlop, had to use 3rd app to fix it.
Click to expand...
Click to collapse
Can you share the steps for other people who have problems?
Sent from my Honor 8 using XDA Labs
netvorCZEK said:
I did rollback once and it end up with bootlop, had to use 3rd app to fix it.
Click to expand...
Click to collapse
Can u say us the steps . We will try to solve the issue not to happen again
I had to use DC-Phoenix, which unlocked BL and flashed update.app. I couldn't do it manually, because my phone wasn't detected by adb devices and I didn't know that code you need for unlocking bl manually, dload method didn't want to turn on.
netvorCZEK said:
I had to use DC-Phoenix, which unlocked BL and flashed update.app. I couldn't do it manually, because my phone wasn't detected by adb devices and I didn't know that code you need for unlocking bl manually, dload method didn't want to turn on.
Click to expand...
Click to collapse
But does dc-phoenix did the job for u atleast?
Yes, it did! It worth the money.
netvorCZEK said:
Yes, it did! It worth the money.
Click to expand...
Click to collapse
So u unbricked it finally . I mean ur issue is cleared ?
gopinaidu77 said:
So u unbricked it finally . I mean ur issue is cleared ?
Click to expand...
Click to collapse
Yes, I unbricked it, now it works like a charm.
netvorCZEK said:
Yes, I unbricked it, now it works like a charm.
Click to expand...
Click to collapse
Glad you fixed it. Would you wanna try some custom ROMs?
netvorCZEK said:
Yes, I unbricked it, now it works like a charm.
Click to expand...
Click to collapse
Quote us , if any issue .we are here to resolve :highfive:
gopinaidu77 said:
Quote us , if any issue .we are here to resolve :highfive:
Click to expand...
Click to collapse
That's right. We're here to help.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
That's right. We're here to help.
Click to expand...
Click to collapse
:good:
Alright back to this thread.. finally back to this "rom"
I've tried flashing the USA L14 update.. but doesn't change the rom..
What do I have to do??
I've got like 3-4 firmwards downloaded.. with update file.. flashing them doesn't do a thing..
coolest35 said:
Alright back to this thread.. finally back to this "rom"
I've tried flashing the USA L14 update.. but doesn't change the rom..
What do I have to do??
I've got like 3-4 firmwards downloaded.. with update file.. flashing them doesn't do a thing..
Click to expand...
Click to collapse
Flash stock recovery and then do the rollback, you should be fine. Then you can install TWRP and mess up your phone again
Rommco05 said:
Hi, u relock bootloader?
Click to expand...
Click to collapse
Nope.. fastboot shows it as unlocked (FRP unlock too now)
netvorCZEK said:
Flash stock recovery and then do the rollback, you should be fine. Then you can install TWRP and mess up your phone again
Click to expand...
Click to collapse
Don't want to mess up the phone again haha.
So, which recovery do I install? Can't figure out the rom build I have since it just says testkeys.. or are they all the same?
Rommco05 said:
If u can wait I find for u right packages, but im busy now
Click to expand...
Click to collapse
Will wait for you..
Hello everyone,
Today around 12:00, my phone did install the latest EMUI update available (365). However, I didn't noticed it and then I couldn't stop it ...
It messed up my system and I wasn't able to boot. eRecovery wasn't working either (unable to get packages).
I had twrp so I thought this was no big deal, but I couldn't manage to reinstall a stock rom, nor install a custom rom (I've tried them all, and none was working : blackscreens all the time), even thought I have experience in flashing roms and messing around with smartphones
I tried to rollback to an older version of my stock rom using huawei's rollback package (even if the manual says that I shouldn't do this since I unlocked my bootloader). The installation was flawless, and then it rebooted to reset my user data. The reset failed, and still couldn't boot.
I've tried to install custom roms again after that, but I was missing "/vendor" and "/product".
I am desperate and out of ideas.
I have access to bootloader, I have fastboot, twrp, and I have experience in flashing and all this stuff.
If you like challenges and you wanna proove that you're the very best like no one ever was, your help is much appreciated
Best regards,
Hazreath
PS : sorry for any english mistake
Can you boot to erecovery?
Sent from my Honor 8 Pro using XDA Labs
adriansticoid said:
Can you boot to erecovery?
Sent from my Honor 8 Pro using XDA Labs
Click to expand...
Click to collapse
Yes I can boot into eRecovery !
Thanks for your interest sir
Hazreath said:
If eRecovery is the thing that you boot in when you press VOL +, VOL - and POWER, I have access to it.
However, if you're talking about the eRecovery we can boot in with a normal boot and 3sec VOL+ press, I'm afraid I can't ...
Thanks for your interest sir
Click to expand...
Click to collapse
I was talking about the second one. The first one was ghe dload flash. You use it if you want to manually flash a firmware. Maybe you cantry that too. Download a full firmware for your model (more or less 2GB in size), extract the update.app inside and put it in dload folder inside storage, and press the volume up, volume down and power buttons.
Sent from my Honor 8 Pro using XDA Labs
I already tried that and it led me to nothing :/
I tried both the EMUI 5.0 firmware and the rollback to EMUI 4.1. They were the only ones availables.
5.0 install failed(uncompatible), and rollback install worked but then user data reset failed...
What was your idea with the second one ? I can access to it, I was wrong (I modified my post a minute ago )
Thanks again
Problem solved !
I made a dload with a update.zip that I found here -> http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1277/g104/v74972/f1/full/update.zip
I'm in EMUI 4.1 and everything works fine (I miss the drawer but it works).
Thanks for your investment sir, and have a nice day
Hazreath said:
Problem solved !
I made a dload with a update.zip that I found here -> http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1277/g104/v74972/f1/full/update.zip
I'm in EMUI 4.1 and everything works fine (I miss the drawer but it works).
Thanks for your investment sir, and have a nice day
Click to expand...
Click to collapse
Glad you fixed it. Have a nice day as well. :highfive:
Sent from my Honor 8 Pro using XDA Labs
I M HAVING SAME PROBLEM HOW U MADE zip
when i click it downloads a zip
what to do now?
i have only twrp and fastboot a screen where it shows ur devices is unlocked in yellow text
where to flash this file?
will this file save my phone?
hey guys when i flash wipe or do anything in twrp it says unable to mount vendor product, invalid arguments.
i got this by flashing an vendor.img provided in a rom(eliterom)
after that my devices waas not booting after waiting for an hour i gone to twrp and tried restoring my backup of stock emui 5 but it fails to wipe vendor and product partitions.
what to do now
how to unbrick
i have working fastboot and working fastboot
is there any file which can i flash??
plz help me its so urgent
narshi shukla said:
I M HAVING SAME PROBLEM HOW U MADE zip
when i click it downloads a zip
what to do now?
i have only twrp and fastboot a screen where it shows ur devices is unlocked in yellow text
where to flash this file?
will this file save my phone?
hey guys when i flash wipe or do anything in twrp it says unable to mount vendor product, invalid arguments.
i got this by flashing an vendor.img provided in a rom(eliterom)
after that my devices waas not booting after waiting for an hour i gone to twrp and tried restoring my backup of stock emui 5 but it fails to wipe vendor and product partitions.
what to do now
how to unbrick
i have working fastboot and working fastboot
is there any file which can i flash??
plz help me its so urgent
Click to expand...
Click to collapse
Get the zip file and extract it in a "dload" folder (create it) to your sdcard.
Put the sdcard into your phone and boot by pressing vol+,vol- and power, then click on the first option and wait !
Sorry I saw your answer a bit late :/
Hazreath said:
Get the zip file and extract it in a "dload" folder (create it) to your sdcard.
Put the sdcard into your phone and boot by pressing vol+,vol- and power, then click on the first option and wait !
Sorry I saw your answer a bit late :/
Click to expand...
Click to collapse
He fixed his device. Guided him step by step on telegram and all is fine now and he is back on BLN-L22 b340 with everything working perfectly fine :good:
shashank1320 said:
He fixed his device. Guided him step by step on telegram and all is fine now and he is back on BLN-L22 b340 with everything working perfectly fine :good:
Click to expand...
Click to collapse
On telegram ? You're a pretty retro dude haha
Well thanks a lot I was worried that he had already threw his phone away !
Take care !
Good to hear this.
Hazreath said:
On telegram ? You're a pretty retro dude haha
Well thanks a lot I was worried that he had already threw his phone away !
Take care !
Click to expand...
Click to collapse
Telegram took me to the past centuries lol.
Anything to help in real time to avoid much of the mess is Ok. I was free for a while so helped quickly and he was quick to understand the things and follow everything as per instructions and was able to restore the phone.
shashank1320 said:
He fixed his device. Guided him step by step on telegram and all is fine now and he is back on BLN-L22 b340 with everything working perfectly fine :good:
Click to expand...
Click to collapse
I am having a similar problem can i get some assistance please? I am trying various update.zip via dload method and none works for me
shashank1320 said:
Telegram took me to the past centuries lol.
Anything to help in real time to avoid much of the mess is Ok. I was free for a while so helped quickly and he was quick to understand the things and follow everything as per instructions and was able to restore the phone.
Click to expand...
Click to collapse
I'm having a hard time with my Honor 6x, will you please provide some help ? I saw your guide for dload method but I couldn't get it to work.
anthony1876 said:
I am having a similar problem can i get some assistance please? I am trying various update.zip via dload method and none works for me
Click to expand...
Click to collapse
Lets connect on Telegram Friday please. been stuck with few things.
id- shashank1320
---------- Post added at 11:52 PM ---------- Previous post was at 11:52 PM ----------
oneprivy said:
I'm having a hard time with my Honor 6x, will you please provide some help ? I saw your guide for dload method but I couldn't get it to work.
Click to expand...
Click to collapse
Lets connect on Telegram Friday please. been stuck with few things.
id- shashank1320