Flashtool " drivers need to be installed for connected device" help - Sony Xperia XZ Questions & Answers

hello
I'm trying to install UK firmware on my Xperia XZ to make finger print scanner working.
but, i have done everything correct, flashtool says driver need to be installed for connected device. could anyone advice me, how to get the drivers installed?
error message-
24/040/2016 09:40:14 - ERROR - Drivers need to be installed for connected device.
24/040/2016 09:40:14 - ERROR - You can find them in the drivers folder of Flashtool.
thanks in advance

I just flashed my device this morning by following a tutorial that I was directed to by another member.
http://www.xperiablog.net/2016/03/12/install-xperia-marshmallow-using-flashtool-and-xperifirm-guide/
Did you run C:\Flashtool\drivers\Flashtool-drivers.exe?
If you are using Windows 8/10, you might need to disable driver signature enforcement before installing the drivers. The tutorial tells you how to do this.
HTH.

I want to do this to mine, but I have a locked bootloader. I have downloaded all the required things. I used the developer site of sony to get a bootload unlock code, when I go to update the driver while in fastboot, it gives me an error that the driver may have been tampered with. This is so frustrating!!! Anyone have any insight?

Just run drivers.exe from the drivers folder in the flashtool directory and choose flashmode and fastboot drivers.

It says then "Impossible to execute DPInst.EXE on current OS". I use windows 7. Does anybody knows what is wrong?

tsquare2112 said:
when I go to update the driver while in fastboot, it gives me an error that the driver may have been tampered with
Click to expand...
Click to collapse
If you run a Microsoft operating system with version number >7 you can check my guide on how to switch on installing unsigned drivers temporarily.
Be super sure that these drivers you intend to install are legit (most are, the manufactures of the devices did not go the extra mile to get them signed properly).

Related

[Q] Xperia L Drivers?

Hello,
My Windows 7 PC is not able to detect the drivers for Xperia L. I have already installed the PC Companion and also installed the Flash Tool drivers, ADB Universal Drivers. Still it doesn't detect the device.
ADB Debugging is enabled.
Can you give a download link for the drivers?
Thanks.
ReSkid said:
Hello,
My Windows 7 PC is not able to detect the drivers for Xperia L. I have already installed the PC Companion and also installed the Flash Tool drivers, ADB Universal Drivers. Still it doesn't detect the device.
ADB Debugging is enabled.
Can you give a download link for the drivers?
Thanks.
Click to expand...
Click to collapse
Try a different approach. Go into your device manager on your PC. You can go into device manager by going into properties of MY COMPUTER or Control Panel\System and Security\System
When your device is connected, do you see an exclamation mark in devices. Reinstall it by finding drivers manaually.
IF this all fails, just delete the device and refresh it.
Another very useful trick is to delete the unknow device (xperia L) and restart your Xperia L. Then search for device changes. it will be detected automatically.
Is your MTP ticked in Xperia / Connection/ USB connection on your phone ?
Hnk1 said:
Try a different approach. Go into your device manager on your PC. You can go into device manager by going into properties of MY COMPUTER or Control Panel\System and Security\System
When your device is connected, do you see an exclamation mark in devices. Reinstall it by finding drivers manaually.
IF this all fails, just delete the device and refresh it.
Another very useful trick is to delete the unknow device (xperia L) and restart your Xperia L. Then search for device changes. it will be detected automatically.
Is your MTP ticked in Xperia / Connection/ USB connection on your phone ?
Click to expand...
Click to collapse
Unfortunately, I have done all that. Isn't there a driver setup file for this phone? Can't seem to find it anywhere.
Thanks!
I'm facing the same problem.
I'm tryng to unlock the boot loader following the instructions on Sony website, but when it comes to use fastboot it just keep saying <waiting for device>.
And I have installed all the stuff you said, too.
ReSkid said:
Unfortunately, I have done all that. Isn't there a driver setup file for this phone? Can't seem to find it anywhere.
Thanks!
Click to expand...
Click to collapse
xperiaL said:
I'm facing the same problem.
I'm tryng to unlock the boot loader following the instructions on Sony website, but when it comes to use fastboot it just keep saying <waiting for device>.
And I have installed all the stuff you said, too.
Click to expand...
Click to collapse
Oh I remember, i was facing the same problem for bootloader. I am uploading the drivers. These should work. The trick is download the 2kb file and past it into google drivers and then find them from the PC.
Good Luck.
Hnk1 said:
Oh I remember, i was facing the same problem for bootloader. I am uploading the drivers. These should work. The trick is download the 2kb file and past it into google drivers and then find them from the PC.
Good Luck.
Click to expand...
Click to collapse
Thanks a lot man, Please if you could share the instructions.
ReSkid said:
Thanks a lot man, Please if you could share the instructions.
Click to expand...
Click to collapse
getochkn said:
the whole of this was my phone was softbricked. I wanted to get into recovery so I could use ADB to try to fix it. When it's softbricked, ADB won't start up, therefore I could use ADB.
Trust me, I know how to use ADB, I just wanted to know if there was a key combination to get our phones into recovery mode with ADB because ADB wouldn't work because my phone was softbricked. It had nothing to do with me not knowing how to use ADB or how to set it up, it had to do with my phone would brick it self before ADB started, so therefore I couldn't send any ADB commands.
Click to expand...
Click to collapse
Don't mention it mate. Hit thanks if you think I helped
DRivers for Xperia L
http://forum.xda-developers.com/showthread.php?p=46681107#post46681107
Problem solved. It was tricky, though.
Having PC companion installed wincrap didn't make me choose other drivers.
So I disabled the signature verification for drivers -> rebooted -> connected Phone while pressing the vol UP -> opened device manager -> select s1boot fastboot (which had a warning icon) -> selected driver manually (the .inf file we replaced following the first steps.
then i just used cmd as in the guide.
et voilà, bootloader unlocked.
I hope this is helpful to those who faced my same problem.

[SOLVED] Soft bricked Z5 - Require Assistant

So, i havent been modding Android phones in a long time and when I wanted to flash MM on my Z5, i forgot that i dont have the Z5 drivers. Now, based on what i know, i did have SONY PC COMPANION installed prior to soft bricking my device, so i would assume the drivers are installed. My current situation is as follows:
-Device wont turn on, switches between RED/GREEN led with error message of "update failed, please connect to PC etc..."
-Sony pc companion doesnt seem to recognize the phone as i cant repair it
-Cannot flash FTF through as it keeps failing to flash at different points, do not know if not having the Z5 drivers play a factor here. I got the drivers from there but i do not know what to do with it as it is not .exe file, i also have the latest flashtool installed.
-I backed up my files prior to this, so i am willing to wipe everything.
Thank you, i would appreciate if i can get some assistant on this. Stupid me for making this mistake in the first place.
Regards,
Litoni
Use PC Companion repair option (marked with a red box on my screenshot).
LitoNi said:
So, i havent been modding Android phones in a long time and when I wanted to flash MM on my Z5, i forgot that i dont have the Z5 drivers. Now, based on what i know, i did have SONY PC COMPANION installed prior to soft bricking my device, so i would assume the drivers are installed. My current situation is as follows:
-Device wont turn on, switches between RED/GREEN led with error message of "update failed, please connect to PC etc..."
-Sony pc companion doesnt seem to recognize the phone as i cant repair it
-Cannot flash FTF through as it keeps failing to flash at different points, do not know if not having the Z5 drivers play a factor here. I got the drivers from there but i do not know what to do with it as it is not .exe file, i also have the latest flashtool installed.
-I backed up my files prior to this, so i am willing to wipe everything.
Thank you, i would appreciate if i can get some assistant on this. Stupid me for making this mistake in the first place.
Regards,
Litoni
Click to expand...
Click to collapse
What Windows version ?
Follow
# STEP 1 - GENERAL GUIDE
INSTALL / CHECK DRIVERS
of
http://forum.xda-developers.com/xperia-z5/general/guide-sony-xperia-z5-unlock-root-tweaks-t3298224
and (re-)boot into (newer) Windows by disabling the driver signature verification.
Log in with administrator rights,
Extract the zip-file,
there you have inf files
https://en.wikipedia.org/wiki/INF_file
https://msdn.microsoft.com/en-us/library/windows/hardware/ff549520(v=vs.85).aspx
right-click on those and choose install - so that the device drivers are installed.
Reboot (of Windows) shouldn't be necessary.
Entering Fastboot mode should still be possible, check whether it's being recognized now (via Minimal ADB and Fastboot).
Remember: in case the device goes crazy because it's not being detected upon connection - you can still turn it off via
Emergency off
(listed under "#FASTBOOT / FLASHMODE / RECOVERY / etc.")
Install the drivers that are inside flashtool.
Mr_Bartek said:
Use PC Companion repair option (marked with a red box on my screenshot).
Click to expand...
Click to collapse
As mentioned, SPCC doesn't recognize my phone. It somewhat does but doesn't give me the option to repair. There are these other screens which i think are prior to the repair page (hopefully) but i was stuck at the page when it asks me to remove the battery or skip if built in. It asks me to press ok to skip but hitting the ok button didn't do anything.
zacharias.maladroit said:
What Windows version ?
Follow
# STEP 1 - GENERAL GUIDE
INSTALL / CHECK DRIVERS
of
http://forum.xda-developers.com/xperia-z5/general/guide-sony-xperia-z5-unlock-root-tweaks-t3298224
and (re-)boot into (newer) Windows by disabling the driver signature verification.
Log in with administrator rights,
Extract the zip-file,
there you have inf files
https://en.wikipedia.org/wiki/INF_file
https://msdn.microsoft.com/en-us/library/windows/hardware/ff549520(v=vs.85).aspx
right-click on those and choose install - so that the device drivers are installed.
Reboot (of Windows) shouldn't be necessary.
Entering Fastboot mode should still be possible, check whether it's being recognized now (via Minimal ADB and Fastboot).
Remember: in case the device goes crazy because it's not being detected upon connection - you can still turn it off via
Emergency off
(listed under "#FASTBOOT / FLASHMODE / RECOVERY / etc.")
Click to expand...
Click to collapse
Thanks my desktop is running windows 10 and i know theres so many issues with it.
gm007 said:
Install the drivers that are inside flashtool.
Click to expand...
Click to collapse
The drivers from flashtool does not include any xperia Z5 series.
Thank you guys for the quick responses, I managed to reflash the .200 through flashtool without any hiccups. which is weird that it didn't work for .163 earlier. I didn't wipe anything, so after flashing .200 i updated the SDK stuff from Google SDK.exe which i think it solved some, from there I flashed .163 (MM) again and it worked. Kept all data intact, even my encrypted Class 10 SD card worked without any issues. So far so good, haven't really encountered any errors, fingers crossed :fingers-crossed: once again thank you for the quick responses.

Need help with drivers

Hi guys I just got my xz premium..and trying to unlock bootloader on this bad boy..problem is when I enter fastboot on my PC, and I entered fastboot mode on the xz premium..and enter " fastboot devices" nothing shows up? I went to device manager on my windows 10 PC..and it shows Android with a expectation mark on it..I tried updating the driver with the official Sony one but driver isn't signed and won't let me..does anybody know how to fix this issue..thanks
You have to disable driver signing enforcement since you're on W10. (And assuming 64bit). You can do this by going to Recovery > Advanced startup > Selecting #7 (usually #7. As long it's the the one that says disable driver enforcement).
When your computer restarts, you should be able to install the driver properly.
@iArvee thank you I'ma try that..I even downloaded Android sdk but I found a video online on how to do it but will try it out

Trying to flash H3223

Hi! So I'm new in this forum and I'm trying to flash Xperia xa2 Ultra H3223 but had two problems, first I try flashing with Flashtool but no matter what it said "no partition delivery" or something "yes to continue", found some forum and said something about copying file 50.2.fsc and manually sync but again, clicked and nothing happened. Then I installed Emma but the only firmware was from the US (I'm from Mexico) and was a custom old version 50.1 with no other option. Finally, I just installed Newflasher, follow the instructions and nothing, just this:
"ERROR: TIMEOUT: failed with error code 997 as follows:
Se estß ejecutando la operaci¾n de E/S superpuesta.
- Error write! Need nBytes: 0x18 but done: 0x0
nBytes[0x0]:
- Error writing command getvar:max-download-size!
End. You can disconnect your device when you close newflasher.exe"
I've done everything, followed every tutorial and nothing seems to work.
By the way, I'm trying to flash firmware 50.2A.3.22, last year my phone bricked and the only thing I found was firmware Commercial and Journalists wich worked well but now I want to try other version and then LineageOs but guess I'll have to wait.
Don't know what I'm doing wrong, if I turn on my phone works perfect and nothing been erased.
My device is bootloader unlocked and no root.
Please let me know if you need to know something else, I'm not desperate but was kind of excited to try Lineage
Thanks!
I had the same problem with my H3113.
While I had installed flashtool and the drivers that come with it, it seems like they are too old for the XA2. They are from 2014.
What I had to do was get flashtool from the Sony website and open up the .exe with 7-Zip:
https://developer.sony.com/develop/open-devices/get-started/flash-tool
Inside of that is the file Sony_Mobile_Software_Update_Drivers_x64_Setup.exe - this one installs a driver from 2017.
After a reboot, flashing with Newflasher worked. What a damn pain!
I had the same problem and can confirm it works. I wish I saw this comment earlier.
If you flash with flashtool will it relock bootloader?
I am running Windows 10 Pro v. 21H1 and also have a Sony H3223.
I am trying to install the latest plain LineageOS on the phone for which is still supported. The H3223 is unlocked so there are a variety of guides for different flashing projects.
LineageOS wiki suggests installing a universal ADB driver which sadly does not apply for this phone. So I then took a peek at SailfishOS and their flashing guide... incidentally, they specify the use of Sony's Xperia X driver. This forum has a thread suggesting the use of Sony's Xperia XZ2 driver.
SailfishOS was specifying the XZ2 driver as well until they updated their guide for Windows 21H1.
I have tried to install both drivers in alteration—both times I uninstalled everything Android via safe mode—and both drivers will not properly install. I get the icon with the yellow triangle badge in my Device Manager list for 5 seconds but then it changes immediately to the questions mark badge and is only visible after showing hidden devices. This is true even while the phone is plugged in.
The phone is being connected via the included USB cable and is being plugged into a USB 2.0 port on my PC.
The phone when connected does get picked up by Windows and I get listings in other places under Device Manager. ADB sees my phone when I run any adb commands but booting into fastboot mode makes the above happen every time.
In other words, when I connect the phone to my PC, Windows installs some driver from who knows where. At this point, adb commands work but fastboot commands don't work. After this, I uninstall the stuff Windows sets up and I boot the phone into fastboot mode only. When this happens, Windows only shows an Android listing under Device Manager for hidden devices. This is the same device that is designated for the driver update in any guide I find... so at this point I have tried updating this object with the Xperia X and Xperia XZ2 drivers. The Sony object that's supposed to get added to the device tree is never added an instead it's as if nothing happened.
I have followed both the LineageOS guide and SailfishOS guide and I have no clue why Windows will not update the driver. There is nothing complicated about either guides... as I said, adb commands work but that is without me installing any driver and Windows does stuff. The only time I see what I'm supposed to see is when all drivers are uninstalled and I connect the phone to my PC while it's going into fastboot mode. However, Windows will not properly see the phone in fastboot mode due to the driver not being applied.

Need help flashing

Hello.
I have an unused XZ i want to give new life to with LineageOS.
And that's where the problems start.
For some reason i cannot get fastboot to work with CMD or PowerShell no matter what I do. ADB works sometimes and other times it doesn't. I can't even unlock my bootloader.
Tried to use Sony Mobile Flasher but that doesn't work as well since every time I try to connect in fastboot mode it gives me :
"
30/034/2021 23:34:09 - ERROR - Drivers need to be installed for connected device.
30/034/2021 23:34:09 - ERROR - You can find them in the drivers folder of Flashtool.
"
When the drivers are 100% installed.
I'm left with no idea what to do so I'm finally sucking up my pride and asking, please help.

Categories

Resources