XC/KUGO/F5321 OmniROM BUILDS
MARSHMALLOW 6.0.1_r74
DOWNLOAD OFFICIAL
DOWNLOAD HOMEMADE
OFFICIAL and HOMEMADE builds are not intercompatible! You will need to do a full wipe if you are switching from one to the other.
CURRENT ISSUES ON OFFICIAL:
1. Incall speaker volume is too low (earpiece volume is fine)
2. Camera sometimes doesn't start (rare)
3. Blutooth and FM radio can't be used concurrently. If you use either you need to reboot to use the other.
4. Double tap to wake doesn't work
5. Adding fingerprints only works on initial device setup. Adding fingerprints from Settings is buggy.
CURRENT ISSUES ON HOMEMADE:
1. Incall speaker volume is too low (earpiece volume is fine)
4. Double tap to wake doesn't work
5. Adding fingerprints only works on initial device setup. Adding fingerprints from Settings is buggy.
KERNEL SOURCE: https://github.com/omnirom/android_kernel_sony_msm/tree/android-6.0
BUGS REPORT
REPORT BUGS ONLY:
- AFTER A CLEAN INSTALL
- USING STOCK OMNI KERNEL
- NO MODS OF ANY SORT
OMNI GERRIT REVIEW
https://gerrit.omnirom.org/
CHANGELOG:
https://changelog.omnirom.org/
DISCLAIMER:
No one is responsible for any damage done to your device but YOU. You've been warned.
[/CENTER]
XDA:DevDB Information
[ROM][XC][MM][6.0.1_r74]OmniROM, ROM for the Sony Xperia X Compact
Contributors
oshmoun
Source Code: https://github.com/omnirom
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2016-12-19
Last Updated 2017-02-11
reserved
Been trying this out since yesterday. Nice ROM, very smooth. Its great to see an AOSP rom with 90% of functionality. Battery usage is on par with stock.
One bug that I noticed is that if bluetooth is on (regardless of whether it is connected or not), it'll keep a 'bluesleep' wakelock which preents the device from going into Deep sleep.
Edit: Another note on the deep sleep problem. Even after turning bluetooth off, the phone doesn't deep sleep. Other wakelocks (event3, event4, event6) show as keeping the phone awake. Reboot fixes it and the phone can finally deep sleep.
Are you guys still enjoying this ROM?
Thanks to oshmoun to this amazing ROM i use it every days and i prefer Android 6 for the xposed module
Fantastic rom! Finally got rid of all the crap Sony bloatware.
However two questions. The camera on the back can now only shoot 8MP photo's. I've disbled the 8MP option in the setting, but it still won't let me shoot 23MP photo's. Is there a way to fix this?
Also the fingerprint scanner doesn't seem to function. When trying to add a fingerprint, it immediately fails (registration cannot be completed). Any fix?
LeZiGue00 said:
Thanks to oshmoun to this amazing ROM i use it every days and i prefer Android 6 for the xposed module
Click to expand...
Click to collapse
speedtoucher said:
Fantastic rom! Finally got rid of all the crap Sony bloatware.
However two questions. The camera on the back can now only shoot 8MP photo's. I've disbled the 8MP option in the setting, but it still won't let me shoot 23MP photo's. Is there a way to fix this?
Also the fingerprint scanner doesn't seem to function. When trying to add a fingerprint, it immediately fails (registration cannot be completed). Any fix?
Click to expand...
Click to collapse
about the camera,you need to wipe camera data after toggling 23MP mode. You'll then see the 23MP resolution in settings.
about the fingerprints, thanks for the hint. This is a bug. Sometimes it works though, so you might get lucky if you try a lot.
also, it's cool to know people are using this rom lol
if you're interested, I can post custom HOMEMADE builds that contain some bugfixes.
Notice though that HOMEMADE builds are signed differently, and won't be compatible with OFFICIAL builds. That means you'll need a full wipe before flashing and booting.
oshmoun said:
about the camera,you need to wipe camera data after toggling 23MP mode. You'll then see the 23MP resolution in settings.
about the fingerprints, thanks for the hint. This is a bug. Sometimes it works though, so you might get lucky if you try a lot.
also, it's cool to know people are using this rom lol
if you're interested, I can post custom HOMEMADE builds that contain some bugfixes.
Notice though that HOMEMADE builds are signed differently, and won't be compatible with OFFICIAL builds. That means you'll need a full wipe before flashing and booting.
Click to expand...
Click to collapse
Definitely interested in updates. Do you know if the Bluetooth issue got fixed?
ammarr said:
Definitely interested in updates. Do you know if the Bluetooth issue got fixed?
Click to expand...
Click to collapse
ok cool. I'll post an updated HOMEMADE build.
Main bugfixes are:
1. camera doesn't randomly crash at start anymore.
2. bluetooth doesn't cause device to stay awake
3. bluetooth and fm can be used without rebooting the device inbetween (not concurrently though, using bluetooth when fm is on will disable fm for example)
EDIT: build is done, tested and all seems ok
download link in OP
Thanks for the new rom. I'm going to flash it asap and let you know how it works. Keep up the work!
Tried this out today and it works really well. I'll probably try it out as a daily this week, because the bugs seem quite minor at this stage. I'm surprised that this isn't getting more attention. Since the BT bug is fixed, I'm wondering if the same fix will work for CM13 as well?
@oshmoun Nice work! I'm not sure how OmniROM works, but what is stopping you from updating official with the same changes?
ammarr said:
Tried this out today and it works really well. I'll probably try it out as a daily this week, because the bugs seem quite minor at this stage. I'm surprised that this isn't getting more attention. Since the BT bug is fixed, I'm wondering if the same fix will work for CM13 as well?
@oshmoun Nice work! I'm not sure how OmniROM works, but what is stopping you from updating official with the same changes?
Click to expand...
Click to collapse
Hehe well I'm just doing the building. Awesome people from the Sony open devices project helped fix the bugs
Official updates for omni 6.0 only come in form of security updates, i.e when Google uploads a new revision. That's why i can't update official that simply. Although to be honest I haven't asked if there are exceptions
I've flashed the rom today and it is working very well. The fingerprint scanner now works fine, even from the settings.
Thanks!
speedtoucher said:
I've flashed the rom today and it is working very well. The fingerprint scanner now works fine, even from the settings.
Thanks!
Click to expand...
Click to collapse
Really? It still doesn't work here.
Maybe it's because you did a full wipe.
Can you try adding/removing fingerprints from settings multiple times please? If it works reliably, that'd be great
oshmoun said:
Really? It still doesn't work here.
Maybe it's because you did a full wipe.
Can you try adding/removing fingerprints from settings multiple times please? If it works reliably, that'd be great
Click to expand...
Click to collapse
I flashed the Homemade version yesterday. I too am able to add fingers after initial setup in the settings. I tried to delete a finger in order to retry but the OS shuts down and reboots.
I believe I found a bug. Homemade version.
While listening to Audio, the whole phone locks up after what seems to be random times. I've listened to audio for a few minutes then it locks. I've listened up to around 45 minutes then locks up. Never more than an hour. If it helps, I've had this occur with Google Play Music, Poweramp, and Pocket Casts apps.
To resolve this, I have to hold power and volume up (Force shut down?)
Turnilemikus said:
I flashed the Homemade version yesterday. I too am able to add fingers after initial setup in the settings. I tried to delete a finger in order to retry but the OS shuts down and reboots.
Click to expand...
Click to collapse
yeah so it's still buggy I guess. I don't think i'll be able to fix that though, sadly. However, I can confirm that the issue doesn't appear on android nougat.
Turnilemikus said:
I believe I found a bug. Homemade version.
While listening to Audio, the whole phone locks up after what seems to be random times. I've listened to audio for a few minutes then it locks. I've listened up to around 45 minutes then locks up. Never more than an hour. If it helps, I've had this occur with Google Play Music, Poweramp, and Pocket Casts apps.
To resolve this, I have to hold power and volume up (Force shut down?)
Click to expand...
Click to collapse
hmmmm, yes you are right. I was able to reproduce that. I think I know why that happens. I used another fix for mp3 playback. The solution that's used in OFFICIAL is different from HOMEMADE.
well, the good news is that android nougat requires neither lol.
Thank you for your time and the build. I've never seen OmniROM before today.
Today I've tried to add some more fingerprints. But now it fails.
I skipped the fingerprint registration during the initial installation and added 3 fingers later, but now it just fails every time.
I also encountered the audio playback issue while using Spotify today.
Hey oshmoun
I'm enjoying your Homemade!
Herzlichen Dank!
Keep on coding! :good:
Related
The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
CM11 ISSUES:
-Video recording lags in reduced luminosity.
-The phone heats too much when playing/watch videos for long time and so on.
-Volume during call is too low.
-Ocasionally freezes & crashes.
-Some graphical issues when the phone freezes.
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
STOCK ISSUES:
-Video blinks in low light(from what I've read it focuses wrong on the light source and starts blinking).
-The proximity sensor remains on after a missed call.
-Multi touch doesn't work as well as on CM11.
-Some weird freezes during call ( the screen remains off / freezes and you can't end the call / sometimes even answer )
-Camera doesn't have as much detail as in CM11 ( if you zoom in,the image doesn't clarify).
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
CM11 FIXES:
-Lag in video recording can be reduced by lowering the exposure.In medium to low light " - 1 " works pretty good and in very low to low light " - 2 " .However,when you use " - 2 " ,the recorded video will be very dark.Still haven't found a solution for this.
-About heating problem,you might want to try @Shivam Kuchhal 's kernel.He reported that his phone doesn't get heat up more than normal.
-About volume during call,it's been solved partially in newer releases by editing snd_soc_msm file.However,if the value is too high,the phne volume will also be too high and the speaker will produce distorsioned sound.However,I see they found a resonable value and both,the volume during call & speaker is about fine.
-For headset buttons not working,you must edit Generic.kl file.Here's a short tutorial to help you:
Go to: system/usr/keylayout/Generic.kl and change as below
key 226 HEADSETHOOK
key 256 BUTTON_1
change to
key 226 BUTTON_1
key 256 HEADSETHOOK
STOCK FIXES:
-For proximity sensor and weird freezes during a call use this tutorial .Haven't tested it personally,but people reported it works even on latest .17 fw.
-For Mac issue [ works for cm11 as well ]
1)Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone
That's all for now,continue to post bugs&fixes and most important:
HELP EACHOTHER
Marius Cristian said:
The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
Click to expand...
Click to collapse
Proximity fix not working!!!
More Kitkat Bugs List:-
1. Headset buttons
2. Camera experiencing crashes randomly, sometimes cause overexposure and being unstable at flash mode
3. Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone.
4. Call bugs(e.g. distortion etc.)
5. Lag when using the video camera
6. battery draining faster then on stock rom. (was improved on early nightly releases....now its back again)
7. GPS not working again (for some it does...others it doesnt....again...wasnt there on first nightlies)(Mostly Happens In CM11)
8. Camera quality is much,much worse then on stock rom
9 . Phone may left hanging and screen wont turn on for several seconds...
10. Some apps are unsupported on playstore...
CM11 bugs
CM11:
1. Switch to HDR mode and within 3 snaps camera app will FC.
2. Headset buttons.. I have to manually edit that Generic.kl after every nightly update.
3. As mentioned above, graphical glitch after updates.
Some of bugs that u mentioned @David pro has been fixed by users, but device maintainer didn't merged it for some reason in official builds. So, get started:
1. These buttons can be fixed, someone(I don't remember who, Sorry) has created a modified Generic.kl. You can find that file somewhere on this forum.
2. Camera quality is medium, but videos are very poor..
3. Still exist
4. @up
5. As I said, videos are bad
6. Caused by Google Play Services, 1st method is use xposed Framework and one of its add-ons, 2nd is just disable Services from Settings>Apps(i'm using second one, because I just don't like Xposed)
7.GPS is working fine, at least for me. No fix needed
8.Yep, on stock it is better.
9.It's caused by "Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone."
10.Well, some of them are only for one platform or type of devices,eg. Tegra 4 games.
No heating issues noticed so far(I use my kernel obviously) and yeah the camera and video quality isn't anything worth praising. Also the hwcomposer issue happens only one time after every boot, after that its all fine.
I normally use AOSPA.
Actually,I think the cm11 camera takes better photos than stock,but it can be buggy sometimes :silly:
About GPS,it's working fine for me too.
About video camera being laggy...I think it's because our phone lacks drivers update.It's hard to believe the video camera will ever be 100% fixed.
I'm sorry I'm kinda busy those days and I don't have time to administrate this thread.I'll edit the main post as soon as I can with solution you guys posted.But it's true,there are things which can't be fixed.Until I come back, HELP EACHOTHER
an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang
vishalaestro said:
an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang
Click to expand...
Click to collapse
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.
Marius Cristian said:
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.
Click to expand...
Click to collapse
another BUG with the stock ROM
1)walkman app flickers in the widget lockscreen
2)poor memory management need to restart the phone daily else the phone lags like a hell
3)camera app didn't respond ,it doesn't even the focus sometimes ,clearing the app data solves this problem temporarily and i think it was not present with the .12 update ,so if anybody could extract the camera app from the .12 update similar to the phone app freeze issue the problem might be solved.
3)walkman app or any other music player makes music to stutter when the same song is played more than one time provided if the songs are stored in memory card also i know that my sdcard doesn't have any problem because it worked fine with galaxy s3.my sd card is sandisk ultra class 10 32 gb
4)battery drain heavy when wifi is switched on compared to previous android 4.1.2
note:i have not rooted my phone or modded my firmware .all i run is the apps taken from the playstore.i have done a factory reset for more than 4 times.
CM11 / Stock (using custom kernel) bug:
Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
Solution:
Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone
solution for Play Services battery drain in CM11
CM11 issues
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
Nfc icon not in statusbar is on all cyanogenmod/aosp based rom
chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother
@underd0g
Nice fix for WiFi-Mac interference problem. :good:
Marius Cristian said:
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother
Click to expand...
Click to collapse
guys please try to solve the issues with stock ROM because they are the stable ones and the bugs are easily repairable if the bugs are reached to right hands.so pls first concentrate on stock ROM
I've been playing around with 4.4 video recording..what i think is the lags occurs when we record in low lights related with the kernel..i'm testing with snapcam as its has auto flash when recording in low lights..First result is same as stock..but in snapcam it has touch to focus when recording..after touch,the recording will get a bit darker when it refocus and walla..no lags..
What i found is, the camera will automatically reduced the exposure to -1 for avoiding the lags even it is on default setting..
When moving the camera in low lights,the recording will lags again after few second..that is with continuous focus..set to normal or auto..no lags..so our stock cam using continuous focus for recording..
Back to the kernel thing..from what i see from the recording is same like this when i'm playing with cnt rom to to get wifi and overclock working.
Ok,so I went back to stock.I'm amazed by the battery life,it lasted 2 days and I used the phone a lot ( especially for calls ).
However,after using the fix for freezes during call and so on,I still have experienced this morning an issue.While I was talking to someone,someone else called and the phone was beeping but the screen was frozen.I had to press the power button to lock the device then unlock it to get the screen to show who's calling and to give me the possibility to answer the call.What do you think I should do?For now I'll wipe phone app data,but I'm also waiting if someone knows a good,another solution to post.
Anyone know a way to remove the automatic shutdown?
My phone shuts down if it reaches 25%
I flashed 5.0 onto my Nexus 5 a while back and have been loving it. But there is a MAJOR issue I have encountered.
If, from the lock screen, i swipe to open the camera (I use Google's camera app) then swipe on the charms and select video and press record... i can almost always reproduce an immediate forced reboot it makes me very sad.
I have tried wiping the system cache... i'm not sure what else to do...
any advice?
bumping... been playing around with my N5 more and more and still getting the issue.
I notice that it happens in other camera apps that can take videos as well. Not just google's official camera app.
Also, it does not have to be launched from the lock screen for it to occur. sigh.
there have been a few times where i can get it to successfully record a video... but i can't reproduce it all the time. MOST of the time it crashes my entire phone
Same here. Noticed they pushing 5.01 out... Maybe a fix. I've had every Nexus and early software is allways buggy, IMO
thanks so much for replying. just glad it's not only my phone, you know?
I think I found a workaround until google fixes it. and they better.
if you open the camera and switch it to video mode but BEFORE pressing record, if you toggle the thunderbolt (light) on and off at least once (doesn't matter if you leave it on or on afterwards), then start recording it SHOULD work without rebooting... at least it has so far.
Dont have the issue on mine, i have the ElemantalX kernel though but i dont think that makes a difference
Zulith said:
I flashed 5.0 onto my Nexus 5 a while back and have been loving it. But there is a MAJOR issue I have encountered.
If, from the lock screen, i swipe to open the camera (I use Google's camera app) then swipe on the charms and select video and press record... i can almost always reproduce an immediate forced reboot it makes me very sad.
I have tried wiping the system cache... i'm not sure what else to do...
any advice?
Click to expand...
Click to collapse
I'm certainly not suggesting the issue doesn't exist, but I cannot reproduce this on my stock 5.0 installation.
That being said, there are seemingly lots of Lollipop bugs that some people get and others simply do not... in my experience that'll probably make them a little more time-consuming to fix.
Well, a little good news... I hope?
I did a flash to 5.0.1 stock and i can't reproduce it anymore. videos record perfectly fine.
now let's give it a week or so of me dicking around with various apps and settings and see how that goes
Zulith said:
Well, a little good news... I hope?
I did a flash to 5.0.1 stock and i can't reproduce it anymore. videos record perfectly fine.
now let's give it a week or so of me dicking around with various apps and settings and see how that goes
Click to expand...
Click to collapse
That's interesting - they must have changed something about the camera then.
I wasn't having the issue you described but I did occasionally get "cannot connect to camera".. fingers crossed it's sorted :good:
This is a no-frills thread.
Okay here it is.
cm_satsuki-Nega_Spork.zip
For dsds testing: cm_satsuki_dsds_test_boot.img Note: you will see the Sony Bootanimation instead of CM13, this is intentional. Also detection may take a minute or two. Provide clear reports.
For dsds model owners, flash rom clean, then in recovery reboot to bootloader and flash this test boot.img with fastboot
Code:
fastboot flash boot cm_satsuki_dsds_test_boot.img
fastboot reboot
NegaSpork
Working:
Sim [single]
Storage
NFC
Audio record fixed
The rest is the same.
What doesn't work:
Since the camera is still not "fixed" we will just say it doesn't work, deal with it.
Next on my todo list is fmradio
DSDS support is still being worked out by the project members. [see test boot image above]
NOTE: OpenGapps may bug out quickpanel/pulldown menu. This may be related to version used.
I experienced this with pico and nano. [see note below]
Click to expand...
Click to collapse
Thanks @KbaB.BroS for testing :good:
Everything from before works, cell, mobile data, nfc, etc.
Internet speeds are good.
It feels snappier than before, so smooth
The pulldown bar works, I can interact with the toggles without any force closes. If somebody complains about their devices, let them know to use OpenGAPPS. I use the mini version
Click to expand...
Click to collapse
Cyanogenmod Source
Thanks to/for
@CTXz Sources and convincing me to get a Z5P instead of another Sammy device.
Sony Kitakami Platform Developer Organization
@zacharias.maladroit For answering questions, many questions. :silly: [ still have more... xD ]
Those of you without a sense of humor, go away.
Okay current features i'm working on and stuff that works/doesn't work
UVC support enabled in kernel. probably need to build rom-side support still. libuvc avutils etc.
- This is for plugging in camera devices in conjuction with apps like LegitDashcam.
USB Gadget functionality as per pelya's work ,
- pelya/android-keyboard-gadget Use in conjuction with the include USB Keyboard app to utilize your phone as a keyboard/mousepad.
I am working my kernel source here toward net-huntery goodness.
The rest you tell me, and you tell me properly. Messages like
"waahhh my whatchamhoozit is all floompy"
are not acceptable.
This is not a random discussion thread either. Idle chatter belongs in general.
This is also NOT a discussion thread for Xposed,Viper, etc..
Thank you.
m
Notes and Updates
NOTE
I have been running this build for two days now and so far , meh it's alright.
Audio [mic] and Camera issues are definitely annoying.
SELinux is COMPLETELY disabled on this build. If You want security go back to stock.
SELinux enforcing is the goal though.
I strongly recommend using a "traditional" root os SuperSU over systemless-root.
Reasons:
Opengapps requires a factory-reset or fresh install to set up correctly!
Privacy Guard based root sucks. It forgets alot of permissions granted.
Use BETA-SuperSU-v2.52 , I wil attach below as it seems hard to find by conventional means.
Would have posted earlier but needed a smoke break *>cough<* :silly:
Updates and Notes
Reserved
Attached UPDATE-SuperSU-v2.46.zip for another option ,
since that worked the best for me in the past.
Thanks for the input. I get error: 7 to install the .zip file
any solution?
Rubensss said:
Thanks for the input. I get error: 7 to install the .zip file
any solution?
Click to expand...
Click to collapse
You need to use the recovery @moonbutt74 compiled from his other thread.
Sent from my Z5 Premium using XDA Labs
KbaB.BroS said:
You need to use the recovery @moonbutt74 compiled from his other thread.
Sent from my Z5 Premium using XDA Labs
Click to expand...
Click to collapse
Thanks , I have already installed.
@moonbutt74
Would be easier to keep the ROM as daily and test if it supported the dual sim version phones too
Apart from that, some of my observations during a small period of usage :
Pardon me if these are already mentioned.
Screen brightness doesn't reach full capacity
Speaker volume is low I think
For me, I felt the display had some slight glitches. Enabled GPU rendering in developer settings and felt it got better , can't guarantee on this though
Had to revert to stock based since sim functionality for me wasn't available ( I have a dual sim phone)
Ashray_Vk
Okay good deal, umm let me try compiling a seperate kernel package.
Yep brightness is currently HORRIBLE
I didn't notice any glitches display-wise, do you actually mean lag in some screen transitions?
I only tested with radioball and raging thunder.
The build i just tested out had full WOW, HOW THE HELL DO I TURN THIS DOWN BRIGHTNESS. :silly:
So either atm i get crappy brightness as max level which is like 75% of stock.
Or i get the nice stock brightness but the slider breaks/doesn't work.
The speaker volume is limited to where it actually should be. Use a mediaplayer that has an option for software decoding, that is a 100% [double] boost. It's not the idea to bomb out the speakers by default, each user can find their own tweak.
m
On the "daily build" thing, my upload time is horrible, so i will not be pushing out excessive/pointless builds. when i have something else fixed, then i will upload another build. Currently i'm boxing with the brightness issue and getting the mic working for audio recording.
moonbutt74 said:
Ashray_Vk
Okay good deal, umm let me try compiling a seperate kernel package.
Yep brightness is currently HORRIBLE
I didn't notice any glitches display-wise, do you actually mean lag in some screen transitions?
I only tested with radioball and raging thunder.
The build i just tested out had full WOW, HOW THE HELL DO I TURN THIS DOWN BRIGHTNESS. :silly:
So either atm i get crappy brightness as max level which is like 75% of stock.
Or i get the nice stock brightness but the slider breaks/doesn't work.
The speaker volume is limited to where it actually should be. Use a mediaplayer that has an option for software decoding, that is a 100% [double] boost. It's not the idea to bomb out the speakers by default, each user can find their own tweak.
m
On the "daily build" thing, my upload time is horrible, so i will not be pushing out excessive/pointless builds. when i have something else fixed, then i will upload another build. Currently i'm boxing with the brightness issue and getting the mic working for audio recording.
Click to expand...
Click to collapse
By screen glitches, I meant that I saw a few glitches when I scrolled down menus ( like even settings app).
Might be just my sleepy eyes too, lol. And in the beginning, everything was feeling laggy, till I enabled those GPU options in the developer settings and turned the screen off and turned it back on.
Don't rely on this data though, I hope someone else verifies this thing before you take it up as an issue .
-Ash
Ashray_Vk said:
By screen glitches, I meant that I saw a few glitches when I scrolled down menus ( like even settings app).
Might be just my sleepy eyes too, lol. And in the beginning, everything was feeling laggy, till I enabled those GPU options in the developer settings and turned the screen off and turned it back on.
Don't rely on this data though, I hope someone else verifies this thing before you take it up as an issue .
-Ash
Click to expand...
Click to collapse
No problem I'm just looking for clarification, are you talking about lag or screen tearing?
moonbutt74 said:
No problem I'm just looking for clarification, are you talking about lag or screen tearing?
Click to expand...
Click to collapse
There was lag in the beginning, no doubt. Lag was there since the boot animation itself.
Yes! Screen tearing is the term i was searching for. I felt like I saw minor issues of screen tearing along with the lag. ( especially when I scrolled down the settings )
I'm so sorry if I am not able to make things clear.
Nice. My question is does it work well with xposed? Other rom gives me random soft reboot randomly
Sent from my E6853 using XDA-Developers mobile app
Killastyle said:
Nice. My question is does it work well with xposed? Other rom gives me random soft reboot randomly
Sent from my E6853 using XDA-Developers mobile app
Click to expand...
Click to collapse
K,
right now we are working on an Alpha build, self evident in thread title. Xposed being superfluous/unecessary is not being discussed in this thread. Of course later on in the release/beta level thread it will most likely be covered.
@KbaB.BroS
On the good side got brightness and auto brightness sorted.
@Ashray_Vk , give me a bit on the dsds kernel, from what I'm understanding SS an DS were supposed to have been combined, so I am running a fresh build after resync, which on my comp will take a day :silly: adn probably not as long as the actual upload
:laugh:
m
moonbutt74 said:
K,
right now we are working on an Alpha build, self evident in thread title. Xposed being superfluous/unecessary is not being discussed in this thread. Of course later on in the release/beta level thread it will most likely be covered.
@KbaB.BroS
On the good side got brightness and auto brightness sorted.
@Ashray_Vk , give me a bit on the dsds kernel, from what I'm understanding SS an DS were supposed to have been combined, so I am running a fresh build after resync, which on my comp will take a day :silly: adn probably not as long as the actual upload
:laugh:
m
Click to expand...
Click to collapse
Normally, if I'd flash a stock based ROM which was meant for single sim, one sim would work in the dual sim models but the memory card would be not detected . sadly, that wasn't the case with cm though. Not even a single sim gets detected.
Ashray_Vk said:
Normally, if I'd flash a stock based ROM which was meant for single sim, one sim would work in the dual sim models but the memory card would be not detected . sadly, that wasn't the case with cm though. Not even a single sim gets detected.
Click to expand...
Click to collapse
you tried enabling only single SIM mode in Sony's (or other) "Stock" ROM and then flashing this ROM ?
Then at least one SIM might work - unless of course the Z5 devices handle things entirely differently
zacharias.maladroit said:
you tried enabling only single SIM mode in Sony's (or other) "Stock" ROM and then flashing this ROM ?
Then at least one SIM might work - unless of course the Z5 devices handle things entirely differently
Click to expand...
Click to collapse
Um, actually, was running rom aur and then had disabled one sim ( just because i didnt want to use that sim) and then had flashed this.
Unfortunately, not even a single sim worked in this.
Killastyle said:
Nice. My question is does it work well with xposed? Other rom gives me random soft reboot randomly
Sent from my E6853 using XDA-Developers mobile app
Click to expand...
Click to collapse
No problem with XPosed for some time here
Updated Build
CM13 Z5P E6853 Somehwere in Alpha -- Updated DragonLady
see OP , OH! and READ IT. grrrrrrr
Please verify communications are functioning, sim detection, in-call mic working etc.
Is your model SS or DS? Please state model number.
Brightnes and auto brightness should be fixed.
External storage fixed
Re-introduced kcal support in kernel
Included system apps [free, and free versions] - as we are testing , some creature comforts.
Adaway.apk
HKB.apk <--- hacker's keyboard
HKNDCTRU.apk <--- hacker's keyboard cyrillic/russian support
KernelAuditor.apk
NetworkDiscovery.apk <--- fairly useful network discovery app, find it on fdroid
NovaLauncher.apk
OpenCamera.apk
PicuriRam.apk
Quickpic.apk
Rebooter.apk
Superuser.apk <--- enable developer options and root access via that way first, then run supersu and update.
Terminal.apk < jackpal terminal
TotalCommander.apk
USB-Keyboard.apk
USBKB.apk < this one and the one above are the same app, i dun goofed.
Wifitoggle.apk
i am working a vanilla cm13 as well as my own custom build in the same turn, the custom utility in sbin is ccrypt, if you want to know how to use it, pm me and i'll give you a break down. do not use it to encrypt a block device !! single files only, and do not use a generated key, use a memorizable alpha-numeric password, else leave it alone.
m
@zacharias.maladroit WHAT HAPPENED TO PERRY !?!?!?!? :crying:
@moonbutt74
I'm sort of wiping the slate clean in several areas of my life - and that (unfortunately) was part of it :angel:
It's finally here ! Oreo for R7 Plus.
https://download.lineageos.org/r7plus
Happy Flashing !
Bugs :
-Double tap to wake not working *FIXED*
-Fingerprint Sensor not working *FIXED*
-Audio stuttering at low volume
rch.aj34 said:
It's finally here ! Oreo for R7 Plus.
https://download.lineageos.org/r7plus
Happy Flashing !
Bugs :
-Double tap to wake not working
-Fingerprint Sensor not working
Click to expand...
Click to collapse
Hooray! Found it! And good to see confirmation that the Fingerprint sensor isn't working.
I can report a Bluetooth bug using Bluetooth headphones. It doesn't matter what app is used and in what environment. The sound is interrupted by a periodic, soft click, followed a nanosecond later by a split second drop off in sound. It's very quick, but noticeable.
Has anyone else noticed this?
If not, if the developer could let me know what files I need to provide to help, I'll gladly provide them
We always report the same bugs snail haha ! there's still the audio stuttering (headphones) issue but i finally found a fix , let me know if you're still having the bug.
rch.aj34 said:
We always report the same bugs snail haha ! there's still the audio stuttering (headphones) issue but i finally found a fix , let me know if you're still having the bug.
Click to expand...
Click to collapse
Haha! I also found this in the [Iron] Maiden Audio app, "Detected problem with app native libraries (libavcodec)", so there might be a codec bug there that's causing the regular dropouts on the wireless phones. It's too disruptive at the moment to tell if the other bug, with wired phones at low volumes, still exists. As I use the phone to compose, the audio issues are problematic. I love Oreo, though.
Are there any developers reading this thread, btw?
And I have issues with the screen not responding when it goes to sleep. I need to hit the power button again to sleep it again and wake it up, but I think that's already been reported.
snaily trail said:
Haha! I also found this in the [Iron] Maiden Audio app, "Detected problem with app native libraries (libavcodec)", so there might be a codec bug there that's causing the regular dropouts on the wireless phones. It's too disruptive at the moment to tell if the other bug, with wired phones at low volumes, still exists. As I use the phone to compose, the audio issues are problematic. I love Oreo, though.
Are there any developers reading this thread, btw?
And I have issues with the screen not responding when it goes to sleep. I need to hit the power button again to sleep it again and wake it up, but I think that's already been reported.
Click to expand...
Click to collapse
I fixed it by downloading a frequency generator app with background playback , set the frequency at 19Hz , and audio is perfectly fine even at 5% volume , i suppose those frequencies are harmless but that's how i fixed it.
as far as screen , double tap to wake is down but hopefully next build it's fixed along with the fingerprint sensor.
rch.aj34 said:
I fixed it by downloading a frequency generator app with background playback , set the frequency at 19Hz , and audio is perfectly fine even at 5% volume , i suppose those frequencies are harmless but that's how i fixed it.
as far as screen , double tap to wake is down but hopefully next build it's fixed along with the fingerprint sensor.
Click to expand...
Click to collapse
Frequency generator app!! Amazeballs!
snaily trail said:
Frequency generator app!! Amazeballs!
Click to expand...
Click to collapse
Yep ! Enjoy your great audio but lack of fingerprint sensor for now hahaha
rch.aj34 said:
Yep ! Enjoy your great audio but lack of fingerprint sensor for now hahaha
Click to expand...
Click to collapse
Except the sound isn't great at the moment! There's also an issue with Norton Password Manager reporting a fault in another API. I'll list it next time it appears
rch.aj34 said:
Yep ! Enjoy your great audio but lack of fingerprint sensor for now hahaha
Click to expand...
Click to collapse
Norton IDSafe has a libvault.so error that might also be non device specific. Very similar to the Bluetooth lib message
snaily trail said:
Norton IDSafe has a libvault.so error that might also be non device specific. Very similar to the Bluetooth lib message
Click to expand...
Click to collapse
Actually i tried the bluetooth in my car and it's perfect , no clicking and much more responsive than lineage 14.
rch.aj34 said:
Actually i tried the bluetooth in my car and it's perfect , no clicking and much more responsive than lineage 14.
Click to expand...
Click to collapse
Oh, bugger!
snaily trail said:
Oh, bugger!
Click to expand...
Click to collapse
I reset the phone and reinstalled 15.1 and Gapps, and the intermittent clicking has disappeared. Something obviously went wrong with the initial installation. So if anyone else has a problem with sound, retrying the fresh install might help. The low volume issue has also gone. The library errors remain for the sound and vault apps, though, so I presume they're non-device specific. And FL Studio is crashing at the end of longer recordings, not saving them in the process, which I think might also be fixed when the library error is addressed.
The wake issue isn't nearly as chronic as it was, either. In fact, I hardly notice it all now. I used the Nano version of Gapps, btw.
snaily trail said:
I reset the phone and reinstalled 15.1 and Gapps, and the intermittent clicking has disappeared. Something obviously went wrong with the initial installation. So if anyone else has a problem with sound, retrying the fresh install might help. The low volume issue has also gone. The library errors remain for the sound and vault apps, though, so I presume they're non-device specific. And FL Studio is crashing at the end of longer recordings, not saving them in the process, which I think might also be fixed when the library error is addressed.
The wake issue isn't nearly as chronic as it was, either. In fact, I hardly notice it all now. I used the Nano version of Gapps, btw.
Click to expand...
Click to collapse
Just upgraded to latest nightly and fingerpint sensor is still dead , i read everywhere that flashing firmware will solve it but no idea how to proceed without losing data.
*BUG Fixed : Double Tap To Wake now working.
rch.aj34 said:
Just upgraded to latest nightly and fingerpint sensor is still dead , i read everywhere that flashing firmware will solve it but no idea how to proceed without losing data.
*BUG Fixed : Double Tap To Wake now working.
Click to expand...
Click to collapse
Expanded desktop still causing havoc. Low audio still produces dreadful stuttering on wired headphones and fingerprint sensor still not there, but it's better. I don't know how to flash the firmware either.
snaily trail said:
Expanded desktop still causing havoc. Low audio still produces dreadful stuttering on wired headphones and fingerprint sensor still not there, but it's better. I don't know how to flash the firmware either.
Click to expand...
Click to collapse
Expanded desktop works perfectly for me. this thread looks like a pm between me and you lol. community dead but so awesome to have 8.1 on the R7 Plus haha.
rch.aj34 said:
Just upgraded to latest nightly and fingerpint sensor is still dead , i read everywhere that flashing firmware will solve it but no idea how to proceed without losing data.
*BUG Fixed : Double Tap To Wake now working.
Click to expand...
Click to collapse
Do you have a link to the information regarding firmware flashing?
rch.aj34 said:
Expanded desktop works perfectly for me. this thread looks like a pm between me and you lol. community dead but so awesome to have 8.1 on the R7 Plus haha.
Click to expand...
Click to collapse
Yep. I'm disappointed the developer hasn't a means of accepting bug reports from users.
I tried this on my r7plusf and wifi does not work. (Australia) Latest 14.1 works and has wifi region selections but 15.1 did not.
steve.rand said:
I tried this on my r7plusf and wifi does not work. (Australia) Latest 14.1 works and has wifi region selections but 15.1 did not.
Click to expand...
Click to collapse
I thought that WiFi should work regardless of the ability to select regions. Perhaps there is another problem. Maybe your persist partition was clobbered in the flashing.
Hi Guys,
Some of you may remember me if you had a Galaxy S9 or Note 10... I rooted my Note 10+ 5G (N976B) Last night and decided to try and have a stab at getting stock android on there by means of project treble. This is a Semi Generic System Image - meaning it's been/being enhanced specifically for our note devices and less focused towards being cross compatible with other devices.
If you have already tested the existing treble roms you'll know that the back lighting doesn't work and you can't adjust brightness. I've had a play around and I've got a working Android 10 AOSP build with fully working backlighting. I thought I'd share as I'd seen a few people who said they can't get GSI's working.
Download System Image
Gapps are included, the image is not rooted. You can flash Magisk yourself.
How to flash:
Make sure you're on a stock based rom (and rooted/twrped) Dr Ketan posted a good guide for this.
Download the System Image above
Reboot to TWRP
Select Wipe
Slide the bar across the bottom of the screen
Go back to the main TWRP menu and select install
Press "Install Image" at the bottom right.
Select the system image you downloaded and swipe to flash.
Once the GSI boots perform another reboot - for some reason the navbar doesn't start up on first boot.
What's working and not working:
Obviously you lose S-Pen functionality, but can still use it as a stylus. You also lose the ability to use your telephoto and telescopic lenses.
UltraSonic Fingerprint isn't working at the moment, but I'm looking into fixing that.
How can you help me?
Let me know how it's working for the different device models. People on other versions please can you let me know your device vendor fingerprint. (to do this On your device, in adb or Termux app use this command: getprop ro.vendor.build.fingerprint)
Credits:
phhusson - for all the project treble work, this is all thanks to him.
Please please support N976n. ???
xshaowenruix said:
Please please support N976n.
Click to expand...
Click to collapse
It should work, it's semi generic. Give it a try and let me know if it works.
If it doesn't I'll need your device fingerprint.
Good work!
Nice ... you stared to work whit the N10+ , still remember havoc in my N9 was a great time , keep goin Fox
@CodeFox. Thank you so much for your work with this! I booted successfully into Android 10 which is awesome. Installing Magisk was successful as well. Do you have any plans to add mods to this?
Welcome aboard
carandcar said:
@CodeFox. Thank you so much for your work with this! I booted successfully into Android 10 which is awesome. Installing Magisk was successful as well. Do you have any plans to add mods to this?
Click to expand...
Click to collapse
Glad to hear it worked for you - can I ask what specific device you're using?
No mods to this really, but right now I'm compiling a AEX pie based sGSI which I'm hoping should have some more improved functionality and potentially the fingerprint sensor working. There's no reason to mod bog standard Android 10, may aswell just use custom roms.
CodeFox said:
Glad to hear it worked for you - can I ask what specific device you're using?
No mods to this really, but right now I'm compiling a AEX pie based sGSI which I'm hoping should have some more improved functionality and potentially the fingerprint sensor working. There's no reason to mod bog standard Android 10, may aswell just use custom roms.
Click to expand...
Click to collapse
I have N975f. I understand what you mean about keeping it pure. I just like to be able to change the look up. ? Thank you again for bringing this to us.
I managed to get fingerprint working
I seem to have gotten it working by doing a fresh reset, flashing this version of gapps (https://forum.xda-developers.com/android/software/arm64-bitgapps-q-10-0-0-t3968500), wiped cache/dalvik then rebooted. i dont know if it made a difference or not but i also held my thumb on the sensor for extra long during the initial set up. Did it on N975F
Jamjarr said:
I seem to have gotten it working by doing a fresh reset, flashing this version of gapps (https://forum.xda-developers.com/android/software/arm64-bitgapps-q-10-0-0-t3968500), wiped cache/dalvik then rebooted. i dont know if it made a difference or not but i also held my thumb on the sensor for extra long during the initial set up. Did it on N975F
Click to expand...
Click to collapse
Hmm, Interesting. I will look into it. Thank you.
Thanks (and a quick question)
Thanks for the rom! This works for me on an N975F, including the fingerprint sensor. The only slight nit I have with it is that I can't figure out how to get rid of the cursor showing up on the screen when I use the stylus. Is there any chance there's a way to hide the cursor, or if it can be added? I don't use any other external input devices ever, so I'd be fully satisfied with a way to just disable the cursor globally on my device.
saghm said:
Thanks for the rom! This works for me on an N975F, including the fingerprint sensor. The only slight nit I have with it is that I can't figure out how to get rid of the cursor showing up on the screen when I use the stylus. Is there any chance there's a way to hide the cursor, or if it can be added? I don't use any other external input devices ever, so I'd be fully satisfied with a way to just disable the cursor globally on my device.
Click to expand...
Click to collapse
Was there any trick to getting the fingerprint to work?? I've had no joy with it. As soon as I try to register my fingerprint it says there was an enrolment error.
Would this gsi theoretically also fix the s10's brightness issue too?
CodeFox said:
Was there any trick to getting the fingerprint to work?? I've had no joy with it. As soon as I try to register my fingerprint it says there was an enrolment error.
Click to expand...
Click to collapse
It did this to me too when I was first setting up the phone, but after it was all set up, I went into the settings to try again, and it worked that time. It didn't show the fingerprint logo during this setup (and it still doesn't on the lock screen), but after a couple tries I was able to estimate correctly where the sensor was. Interestingly, the fingerprint logo does come up in the password manager app I use when I go to unlock it.
Not sure if there are logs that would help or if recording my screen while adding a new fingerprint would be informative, but I'd be happy to do either if that helps you debug in some way.
saghm said:
Thanks for the rom! This works for me on an N975F, including the fingerprint sensor. The only slight nit I have with it is that I can't figure out how to get rid of the cursor showing up on the screen when I use the stylus. Is there any chance there's a way to hide the cursor, or if it can be added? I don't use any other external input devices ever, so I'd be fully satisfied with a way to just disable the cursor globally on my device.
Click to expand...
Click to collapse
DBDPCG said:
Would this gsi theoretically also fix the s10's brightness issue too?
Click to expand...
Click to collapse
What's the issue with the S10? The backlight doesn't work?
CodeFox said:
What's the issue with the S10? The backlight doesn't work?
Click to expand...
Click to collapse
As I've heard, haven't tried it yet though
DBDPCG said:
As I've heard, haven't tried it yet though
Click to expand...
Click to collapse
For what it's worth, all the other GSI's I've tried for the Note 10+ weren't able to adjust the backlight; this is the first one where it just worked. I don't have an S10 to try this out on though, so I have no idea how this ROM would run on it.
LTE working despite phone claiming 3G
One thing I've noticed with this ROM is that the phone claims that it's always only getting 3G rather than LTE and has no bars; however, from doing a speed test on data (with wifi turned off, of course), I got around 8.5 Mbps down, which from a quick Google seems to be will beyond 3G range and into the range that LTE would give. If anyone else thinks they are having issues with getting LTE, I suggest doing a speed test, since you might actually be getting it despite what the phone reports.
saghm said:
One thing I've noticed with this ROM is that the phone claims that it's always only getting 3G rather than LTE and has no bars; however, from doing a speed test on data (with wifi turned off, of course), I got around 8.5 Mbps down, which from a quick Google seems to be will beyond 3G range and into the range that LTE would give. If anyone else thinks they are having issues with getting LTE, I suggest doing a speed test, since you might actually be getting it despite what the phone reports.
Click to expand...
Click to collapse
Go into your network settings and change the default connection from 3g to LTE/4G/3G.
For some reason it seems to default to 3g preferred.