[Completed] My lenovo S580 got stuck when i tried to clear the cache from the recovery - XDA Assist

My lenovo S580 got stuck when i trued to clear the cache ftom the recovery mode.. it suddenly got switched of after that its just blinking and show "E:failed to mount /cache (invalid argument)" and then i have tried maybe the whole world to fix it but i couldn't. .i have tried QPST as it is snapdragon 200 processor but my downloaded ROM do not contain the firehose.mbn file nore the xml file to start flashin.. i have even tried SP Flash too though i know its only for MTK processors still i tried my luck but its as always not so lucky.. i have searched like 1 month to find a rom which can be flash through qpst or a tool which can help me but i failed.. i have seen that many of the forum do not reply about the problems of this particular phone I dont think xda is one of them so m here for bdgging a solution pls pls pls help me out of this problem ..A very soon reply is expected. Thank you in advance.

DeepNeilRoy said:
My lenovo S580 got stuck when i trued to clear the cache ftom the recovery mode.. it suddenly got switched of after that its just blinking and show "E:failed to mount /cache (invalid argument)" and then i have tried maybe the whole world to fix it but i couldn't. .i have tried QPST as it is snapdragon 200 processor but my downloaded ROM do not contain the firehose.mbn file nore the xml file to start flashin.. i have even tried SP Flash too though i know its only for MTK processors still i tried my luck but its as always not so lucky.. i have searched like 1 month to find a rom which can be flash through qpst or a tool which can help me but i failed.. i have seen that many of the forum do not reply about the problems of this particular phone I dont think xda is one of them so m here for bdgging a solution pls pls pls help me out of this problem ..A very soon reply is expected. Thank you in advance.
Click to expand...
Click to collapse
Greetings and welcome to assist. I don't know if this thread helps
http://forum.xda-developers.com/android/help/help-rooted-phone-died-t3199713
also I think there is a custom rom for your phone here
http://forum.xda-developers.com/general/help/lenovo-s580-t2987050
Good luck
Sawdoctor

sawdoctor said:
Greetings and welcome to assist. I don't know if this thread helps
http://forum.xda-developers.com/android/help/help-rooted-phone-died-t3199713
also I think there is a custom rom for your phone here
http://forum.xda-developers.com/general/help/lenovo-s580-t2987050
Good luck
Sawdoctor
Click to expand...
Click to collapse
Sir, my phone is not also getting into the recovery mode its just stuck on the screen with an android with an exclamation sign on the stomach.. i have tried many times to get into recovery mode by pressing vol down + power key but it is not working as well..
And those links are expired ..I guess I really got a bad luck thank for your response

DeepNeilRoy said:
Sir, my phone is not also getting into the recovery mode its just stuck on the screen with an android with an exclamation sign on the stomach.. i have tried many times to get into recovery mode by pressing vol down + power key but it is not working as well..
And those links are expired ..I guess I really got a bad luck thank for your response
Click to expand...
Click to collapse
Is your device recognised by your pc ? Is it possible to use fastboot/sp flash tools ?

sawdoctor said:
Is your device recognised by your pc ? Is it possible to use fastboot/sp flash tools ?
Click to expand...
Click to collapse
Yes my device is recognised by my pc ..its showing Qualcomm HS-USB QDloader 9008 in my ports section in device manager.. but my device is not listed on my adb devices when tried flashboot...and my stock rom do not have a scatter file to be flashed with sp flash tool.

DeepNeilRoy said:
Yes my device is recognised by my pc ..its showing Qualcomm HS-USB QDloader 9008 in my ports section in device manager.. but my device is not listed on my adb devices when tried flashboot...and my stock rom do not have a scatter file to be flashed with sp flash tool.
Click to expand...
Click to collapse
I think you may need usb debugging enabled to use adb which obviously isn't an option. Only other thing is to contact the manufacturer and see if they can help

Related

[Q] Please Help, Samsung grand quattro gt-i8552 stuck in CWM Recovery

Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Can you boot into download/odin mode?
Hi I have the solution !!!
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Download this file
Code:
https://www.mediafire.com/?2dkdp5etfa9g2by
copy this file to your sd card..
then boot your phone normally and it will go into cwm mode as you mentioned ...
Select apply update zip from sd card...
Select the file you downloaded...
If it prompts select yes.... Your phone will boot into normall mode....
If you want all your contacts and smses backup you can do this by mobogenie software...
Hope it helps... if not message me... And dont forget to press thnx..
Yes
Kobro said:
Can you boot into download/odin mode?
Click to expand...
Click to collapse
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.
Thanks Buddy
Thank you So much, let me give it a shot and let you know
sturkish said:
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.
Click to expand...
Click to collapse
Then maybe its a driver problem? try downloading "samsung drivers for mobile phones", maybe that will let you get into odin and flash a stock rom.
Cant enter cwm recovery
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:
OP Junior said:
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:
Click to expand...
Click to collapse
wrong procedure bro..
power+home+vol up..hold them together and when phone vibrates then leave the power button but keep on holding the volume up and home button..you will go into you recovery. .
hit thanks ..it will motivate me..dont hesitate..
---------- Post added at 11:29 AM ---------- Previous post was at 11:24 AM ----------
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
hey..just do one more thing in addition with all the things you have done
reflash cwm recovery using odin..but this time tick on auto reboot option..
n u r done!
if it worked please let me know..
and press thanks bro it will motivate me to help out severel peoples who messed up with their phone..
i 8552 stucks on samsung logo
hello all of u i done all as well as u tell above but now i face another problem while i reeboot the set it stucks on samsung logo & mtp drivers are not installing on my system . so due to mtp not installed odin is not working odin i am showing screen shoots of odin
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
after this it is doing nothing
please help me what to do
solution dint work
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....
solution
gthm.dman said:
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....
Click to expand...
Click to collapse
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work
Didn't work!
archr3d said:
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work
Click to expand...
Click to collapse
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.
Legit Solution
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Hi there,
I just recently experienced this nightmare where I tried to factory reset my GT-I8552 and all went wrong. As u menioned,my device too got stuck into cwm recovery mode 6.0.4.5.
I searched the whole internet but to no avail. then i thought that my cwm might hv curropted or damaged.So i downloaded the stock cwm for GT-I8552 and flashed it using odin and say what..... my device booted normally!!
Hope this helps!
Currently i cannot send u the link but u can find the stock cwm for gt-i8552 from google!
 @parth3399
swapnilsj said:
hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.
Click to expand...
Click to collapse
Flash the cwm compactible to ur device using odin.... Worked for me !
I have also same issue and still stuck with this... please help..
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
:
i have also same issue and i'm still stuck with this... please help .. i have install lot of drivers but the device did not detect in odin mode... need solution please
this helped me.
forum.xda-developers.com/showthread.php?t=2494471
Hi. I fixed mine by flashing cwm again but this time by ticking the Auto Reboot.
same problem here could you find any solution??
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
hey, I am also facing with exact same issue, as I had cosmic ROM installed when i did factory reset from inside ROM it has stuck in bootloop in CWM and not even ODIN is able to recongnize it. I have tried lots of CDC drivers too, it recognizes my phone as LEmobile... I am stuck quite badly please help!!!!!!!!!!!!!!!!!!
heelp!
me too

Need help to recover my Oppo R7plus f - International version Qualcomm

My Phone OpoR7 Plusf was bricked while I was flashing the Spectrum rom
Now , the Phone cant go to recovery mode , can go to fastboot mode as I can see the fastboot logo with some Chinese letters
I have tried the Thread (Oppo r7 plus m (s615) was brick. (QDLoader 9008) (HELP!!)) which is for the m version but didnt help as my PC didnt recognize the device as Qualcomm HS-USB QD Loader although t I have installed all USB drivers I know
I can t even get ADB to work
device is booting , stuck in OPPO logo for 10 sec then shutdown
any advise Please will be much appreciated
midterm_2003 said:
My Phone OpoR7 Plusf was bricked while I was flashing the Spectrum rom
Now , the Phone cant go to recovery mode , can go to fastboot mode as I can see the fastboot logo with some Chinese letters
I have tried the Thread (Oppo r7 plus m (s615) was brick. (QDLoader 9008) (HELP!!)) which is for the m version but didnt help as my PC didnt recognize the device as Qualcomm HS-USB QD Loader although t I have installed all USB drivers I know
I can t even get ADB to work
device is booting , stuck in OPPO logo for 10 sec then shutdown
any advise Please will be much appreciated
Click to expand...
Click to collapse
Are you still stuck in that situation?
Im ok now and got it fixed ????
Can you please describe how you fixed it as I am in the same situation. Thanks
same problem with my r7 plusf.. how did you fixed it
tamil18 said:
same problem with my r7 plusf.. how did you fixed it
Click to expand...
Click to collapse
PM me I might be able to help
kishd said:
PM me I might be able to help
Click to expand...
Click to collapse
ok
r7s unbrick
can u help me, my phone r7s now dwtect usb qlooder 9008. thx
kishd said:
PM me I might be able to help
Click to expand...
Click to collapse
please share
Mikomiki84 said:
please share
Click to expand...
Click to collapse
For r7plusf only.
https://www.dropbox.com/s/oz1rytwu7pyyduc/R7plusfEX_11_A.12_151225.rar?dl=0
can any one share stock recovery img file for oppo r7 plus f
Can someone kindly post the stock recovery image. I need it very bad. Many thanks.

[Completed] HELP?

Okay guys, so I was trying to bring out of a bootloop a ZTE Blade L2 . I`ve tried putting and update.zip file on an SD, wipe out data and cache and then install the .zip file but did`t work. Okay, now here is where this got ****ed up. I have seen a tutorial to unbrick this phone with sp flash tool, so i have formated the phone via sp flash tool (detection was okay), then I have load the scatter file for the device and click the download button, conected the phone. Everything was going right until my ****ty USB disconected from the device at 48% of the download. Now i try to connect it but my PC doesnt recognize it anymore.
Thanks for the help and sorry for bad english.
XDA Visitor said:
Okay guys, so I was trying to bring out of a bootloop a ZTE Blade L2 . I`ve tried putting and update.zip file on an SD, wipe out data and cache and then install the .zip file but did`t work. Okay, now here is where this got ****ed up. I have seen a tutorial to unbrick this phone with sp flash tool, so i have formated the phone via sp flash tool (detection was okay), then I have load the scatter file for the device and click the download button, conected the phone. Everything was going right until my ****ty USB disconected from the device at 48% of the download. Now i try to connect it but my PC doesnt recognize it anymore.
Thanks for the help and sorry for bad english.
Click to expand...
Click to collapse
Hi,
There's no dedicated forum for your device here. This thread seems to be the most relevant for your issue:
ZTE Blade L2 Kitkat Firmware
Try posting your query there. You'll have to create an account to post in the main forums.
Good luck

[Completed] Huawei Phone Flashing Problem

Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.
MujinFaye said:
Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can not find any answers to your problem but several users who have had this issue with mtk devices. It does sound like your memory chip has failed unfortunately but I do hope I'm wrong
Good Luck
Sawdoctor

Techno Mobile Stuck at Techno LOGO

Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
f_magsi said:
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
Click to expand...
Click to collapse
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
thanks brother, it worked.
f_magsi said:
thanks brother, it worked.
Click to expand...
Click to collapse
I'm glad to see your device is working again. Please post the screenshot here.
mvikrant97 said:
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
Click to expand...
Click to collapse
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
f_magsi said:
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
Click to expand...
Click to collapse
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
mvikrant97 said:
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
Click to expand...
Click to collapse
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
w1n73rf3ll said:
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
Click to expand...
Click to collapse
I don't have Chimera tool to test.
Why do you need the chimera tool?
its a phone repair program ... i tried with others tools and no luck

Categories

Resources