Related
I just upgraded my router to a wireless one. Firstly, it's connected via ethernet to a PC and it is happily getting internet access.
On my i5500 I get a strong wifi signal. Wifi Analyser shows the signal at max constantly. I can also connect with Gmote and it works just fine.
The problem is that I can't actually access the net at all from the phone.
So basically I know that my phone is talking to the router with no problem. It's just getting out onto the internet.
Does anyone know of a solution?
try logging into your router and change the broadcast channel to something else and test it again. it should be something like a/b/g mode... define a single channel and see if it works.
I had originally thought that was working. It did for the first few minute where I had connection but then it just dropped.
I have noticed that I have some very small bursts where I can connect.
Do you think that trying the different channels may be the solution?
I have the same problem. Have you found a solution?
Still no solution. I went through every channel and every encryption method.
So far I've found that having the channel set on 'Auto' and then disabling encryption seems to give me internet connection through WIFI for at least the initial period but it eventually drops. But that's also not always.
I've also Googled it to death and found nothing. If you do find the solution please post it here and I'll do the same.
Maybe we can help each other.
make sure you entered the right password of wlan.
use a pc to connect the router and in the wlan you'll find the password.
Ok, just to clarify. My phone connects to the Router via WLAN. In fact I can use Gmote to control my PC. So the WLAN connection is great.
The problem is accessing the internet when using that connection.
I had similar problems with a router last year. I resolved the issues by flashing DD-WRT firmware. The manufacturer's firmware was junk.
Sent from my ADR6300 using XDA App
I had that idea but they don't have firmware for my router yet. I have asked them if they intend to make one.
Any chance the firewall on your phone is blocking your browser from using the Wifi?
Sent from my DInc via XDA App
I have no firewall on my phone.
Ok I've tried some new stuff and they I've had the longest connectivity so far (which is about half an hour).
First I made sure my Wifi wasn't set to turn off when the screen goes to sleep. Second, according to a forum I read, Netgear recommends channel 7. If that channels doesn't work try 1,3,6,9,11,13.
I then disabled encryption.
Fortunately no one near me uses Wifi at all and I've got the kind of walls that stop the signal from getting outside.
Anyway. It's working so far but I'll monitor and report.
[edit] And I forgot. The router was checking for firmware but it wasn't actually finding so I downloaded it myself. Seems that also made a difference.
Ok. I can confirm after 2 and a half hours my internet connection is stable. I even left half way through and when I came back it connected perfectly.
So as a summary here's what I did:
1) Get latest firmware
2) Change channel to 7
3) Disable encryption
I will change encryption and see if it still works
Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.
Hi Pirate
it's a bit depending on the ROM you have installed - but since Android 4 you have a quite reliable setting. The default behavior of Android devices is to deactivate the wifi connection when it goes to sleep.
Some ROMs don't recognize the disconnection and the switch/button still shows "Wifi on" although disconnected.
First step: go to settings / wifi settings, hit the menu button (top right three dots) and check the advanced settings.
Somewhat like "Keep WLAN active in standby" - set this to always.
That should solve it already under android 4.x
If this doesn't help, look into Play Store - search for "wifi keep alive". But for the SGT 2 you shouldn't need it
Greetz - Chris
It was already set to "Always" so I don't think that will help. I will look at that app to see what it does.
Sent from my Nexus 7 using Tapatalk HD
wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.
guncrasher said:
wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.
Click to expand...
Click to collapse
The problem is that it never comes back on. Well it shows the wifi icon and the signal and everything but it just doesn't have any data connection. Any apps that use data act like wifi is off. The only way to get it to start working again is to toggle wifi or reboot. I also forgot to mention it is the stock ROM, only rooted. It got the OTA a few days ago too and it has happened since then.
You're not alone
Skurvy_Pirate said:
Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.
Click to expand...
Click to collapse
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
I know this isn't super helpful but I had the same bug you describe on the previous version of carbon. When I updated to the latest it seems to have stopped.
Sent from my GT-p5113 using xda premium
I had similar issue with my aTab Phone 4 and TP-Link TL-WR941ND (OpenWRT)
After disabling WMM capability in the router the problem disappeared!
Change router lease time to "2weeks"
Sent from my GT-I8190N using XDA Premium 4 mobile app
Same issue.
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
Same issue. also using connectify and also tried all things you have described. If you find any solution please let me know.
I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
No option for static IP in connectify
jopsinas said:
I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
Click to expand...
Click to collapse
There is no option in connectify for static IP and in USB wifi dongle also there is no option to set static IP.
Help!
---
---
Same issue
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
1. I have had the exact same issue for (atleast) the past 2 years. Have survived by repeatedly turning wifi on and off.
2. I too use connectify. This issue doesnt seem to happen on every wifi connection (just like your case). Even more specifically, it seems to happen ONLY when I connect my phone to the hotspot created via my laptop (connectify).
3. Even when the internet is actually working, some apps do not seem to recognise that(take some time to realize it is working), while others are able to connect instantly. Specifially, whatsapp is unable to send/receive messages for about 1-2 mins, after which I receive a whole bunch of messages at once.
This does not seem to be an issue due to connectify as well. I have tried creating a hotspot from my laptop without using connectify as well, but unfortunately, nothing changed. Further, this does not happen when my phone connects to a hotspot created via connectify by some other pc. The wifi and internet work perfectly fine when connected to a hotspot created via my friends computer.
Further, this problem happens only when a mobile connects to the hotspot. Doesn't occur when another laptop/PC connects (not sure about tablets).
I have looked into every nook and cranny on the internet, explored every forum for any working solution, but have been unsuccessful. In fact, this is the first place where I saw the exact same problem as mine, and was wondering if you have found any solution to it .
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
I'm having the exact same prob on my ZTE Grand x V 970
It started when i had kitkat and i couldnt even "fix it" restarting the wifi, i had to reset the phone in order to have my wifi work for like 2-5 mins and then stops recieving data, tried to reconnect and stays on turning on wifi.. Now i changed to the stock Rom and the problem is still there but at least now i can "fix it" restarting the wifi connection until certain point.
Issue sharing internet with Connectify from PC
Go to:
Control Panel\Network and Internet\Network and Sharing Center
On the left column, click on CHANGE ADAPTER SETTINGS.
You should be in: Control Panel\Network and Internet\Network Connections by now.
Then click on: Microsoft Virtual Miniport Adapter and click on Properties, then click on the 'Configure' button in the 'Networking' tab. From this window, go to the 'Power Management' tab and uncheck 'Allow the computer to turn off this device to save power'.
This works for me. Try this out
If this doesn't work further, you can try out mHotspot for the same purpose.
I've had the same issue, with the wifi saying it's connected even though it isn't.
This thread is 4 years old and this issue still hasn't been fixed. What a shame.
Same issue here on OnePlus 3 even after factory reset.
I have this same problem after the security patch Mid March to Jan 1, 2019. The WIFI doesn't show in the top status bar, but toggling wifi off/on fixes it till the next overnight. I did make one change to my wireless about that same time and that was moving the min connect speed from 6Mbps to 12Mbps to help with bandwidth issues being cause by devices using low speeds and having several SSID broadcast. My S7 and Tab A both work fine - so I think it was something in the security patch.
I believe the point of having Wifi at all on the gear S3 is so that your phone can continue to talk to your gear via the Samsung account over the internet (assuming both devices are on and connected to the internet over wifi)
Is this the only use case for Wifi being turned on?
Does this scenario only cover alerts, or will it also support calls texts and emails?
scoob101 said:
I believe the point of having Wifi at all on the gear S3 is so that your phone can continue to talk to your gear via the Samsung account over the internet (assuming both devices are on and connected to the internet over wifi)
Is this the only use case for Wifi being turned on?
Does this scenario only cover alerts, or will it also support calls texts and emails?
Click to expand...
Click to collapse
The two devices will talk to each other whether wifi is turned on or off. Wifi comes in handy for apps like Spotify so you don't have to use up your data and apps like Kodi gear where you can control multimedia through your watch .
Sent from my SM-N915T using Tapatalk
scoob101 said:
I believe the point of having Wifi at all on the gear S3 is so that your phone can continue to talk to your gear via the Samsung account over the internet (assuming both devices are on and connected to the internet over wifi)
Click to expand...
Click to collapse
You mean while out of bluetooth range? If so yes, that is one of the usages of wifi.
scoob101 said:
Is this the only use case for Wifi being turned on?
Click to expand...
Click to collapse
No as @MobileUnlockBase pointed out already.
scoob101 said:
Does this scenario only cover alerts, or will it also support calls texts and emails?
Click to expand...
Click to collapse
In Wifi mode you will keep receiving all kind of notifications including text, missing calls etc., but you can't make/receive phone call over wifi. Currently phone call over wifi is not available on this watch.
If you always have your phone with you (by definition this means within BT range) there is no reason to use WiFi. There is nothing that can be done via WiFi that can't be done via BT. But the reverse is not true.
So basically if you have your phone with you at all times, its a complete waste of battery. Turned off. Cheers.
10urshin said:
You mean while out of bluetooth range? If so yes, that is one of the usages of wifi.
No as @MobileUnlockBase pointed out already.
In Wifi mode you will keep receiving all kind of notifications including text, missing calls etc., but you can't make/receive phone call over wifi. Currently phone call over wifi is not available on this watch.
Click to expand...
Click to collapse
.
I'm totally unclear on the purpose of Wifi on this watch! I turned off Bluetooth to use Wifi and it can't connect because the of "sign-in procedure not supported"! Does that mean it can only connect to an open network??? Those really don't exist these days.
Why is there such a big discussion about wifi on this watch? The watch has wifi because Samsung wanted to put it in there and most of us are grateful. Do you want a smart watch without wifi? Again, there are apps like Spotify that it is better to be on wifi instead of GSM, depending on what network you use.
Sent from my SM-N915T using Tapatalk
RaymondPJR said:
.
I'm totally unclear on the purpose of Wifi on this watch! I turned off Bluetooth to use Wifi and it can't connect because the of "sign-in procedure not supported"! Does that mean it can only connect to an open network??? Those really don't exist these days.
Click to expand...
Click to collapse
No it can connect password protected networks, my watch is connected to my home wifi right now, password protected ofc. Try changing encryption protocol(i'm on TKIP+AES) of your access point or try to connect to another access point.
10urshin said:
No it can connect password protected networks, my watch is connected to my home wifi right now, password protected ofc. Try changing encryption protocol(i'm on TKIP+AES) of your access point or try to connect to another access point.
Click to expand...
Click to collapse
Lol, if i turn off password protection on my home network, then my neighbors will start using my Wifi! I can't believe Samsung overlooked this!! I'll just wait for a possible update???
I can confirm that it should connect to a wifi protected network. I use WPA2-PSK and it connects fine to my router.
MobileUnlockBase said:
Why is there such a big discussion about wifi on this watch? The watch has wifi because Samsung wanted to put it in there and most of us are grateful. Do you want a smart watch without wifi? Again, there are apps like Spotify that it is better to be on wifi instead of GSM, depending on what network you use.
Sent from my SM-N915T using Tapatalk
Click to expand...
Click to collapse
The discussion is because people want to understand the uses of their watch. Having it is nice, but there aren't too many use case scenarios for it. Most of the time where WiFi is available, the phone will be close at hand and connected via BT. Streaming music (over WiFi or otherwise) is a very limited application because of the battery drain. If/when moreb Tizen apps are developed for the watch, using WiFi may become practical.
At home i do leave my phone in 1 place, keep my S3 on yes moving around its always BT, but moving further around the house when BT drops the WIFI takes over.
Also once i forgot my phone at home, but when i reached the gym (was registered for their WIFI) i still got my notifications etc.
But all in all no much use, but i left it on as could not discern much battery loss with it being on.
you have to sync the wifi from your phone to the watch then it will just connect.. look on the gear app settings> gear connection > Sync wi-fi profiles..
It's not about giving a use for WiFi all the time. Most of the time WiFi should be off to conserve battery. It is more about the one off scenarios like you forgot your phone at home, but you can connect to WiFi at work and tell your wife you are alive through a text... or for the tizen app developer, to test apps on your watch you need to connect to the watch via wifi... or for spotify.. there are several reasons to have it, but still it should be off Moore often than not
jestexman said:
you have to sync the wifi from your phone to the watch then it will just connect.. look on the gear app settings> gear connection > Sync wi-fi profiles..
Click to expand...
Click to collapse
10urshin said:
No it can connect password protected networks, my watch is connected to my home wifi right now, password protected ofc. Try changing encryption protocol(i'm on TKIP+AES) of your access point or try to connect to another access point.
Click to expand...
Click to collapse
Odd, now it's connecting without doing either of your suggestions!!? Confusing!
Sent from my SM-T377T using XDA-Developers Legacy app
Well GWD needs the watch and PC connected to the same network (wifi) to get the faces from one place to another. Unless you get it into a store maybe, but having it on wifi is handy to test things out as you add them and modify themes.
Just to share my opinion. In my work I’m not allowed to have the phone with me. So the solution to continue receiving my notifications are through WiFi, and it works perfectly.
Streaming music from Spotify on my watch over Wifi.
scoob101 said:
I believe the point of having Wifi at all on the gear S3 is so that your phone can continue to talk to your gear via the Samsung account over the internet (assuming both devices are on and connected to the internet over wifi)
Is this the only use case for Wifi being turned on?
Does this scenario only cover alerts, or will it also support calls texts and emails?
Click to expand...
Click to collapse
WiFi (WiFi Direct) is also used for syncing Images, songs and large apps over to your watch; these would otherwise take lots of time over Bluetooth.
After last update there is no connection via wifi with my phone.. Does someone experienced the same issue?
This is my second phone to have this problem. First was my old S4, now my S7 has the same problem. Basically, I want to watch YouTube or Netflix on my phone over Wi-Fi, and I want to listen to it on a bluetooth headset. But after a few minutes of watching/listening, my Wi-Fi connection always dies, I get that little exclamation point next to the Wi-Fi symbol in my notification panel, and the only way to fix it is to turn off Wi-Fi and turn it back on. It'll work for another couple minutes, then die again and need to be reset. Bluetooth stays connected the whole time and never drops. It's just the Wi-Fi that gets dropped. If I turn Bluetooth off and just listen via phone speaker or wired headphones, no problem, Wi-Fi can cruise all day.
The research I've done suggested that 2.4GHz might be causing a problem, but my network is 5GHz. Another suggestion was to switch the phone to a static IP address, that didn't help. I'd also read that Android has problems with IPv6, so I went to disable that in my router and discovered that it's never been on.
So, I found three solutions on my own, and none of them worked. Now it's time to reach out to the brain trust here. Does anyone have any idea what might be the problem? Vanilla S7, no root or ROMs. Thanks!
dstarr3 said:
This is my second phone to have this problem. First was my old S4, now my S7 has the same problem. Basically, I want to watch YouTube or Netflix on my phone over Wi-Fi, and I want to listen to it on a bluetooth headset. But after a few minutes of watching/listening, my Wi-Fi connection always dies, I get that little exclamation point next to the Wi-Fi symbol in my notification panel, and the only way to fix it is to turn off Wi-Fi and turn it back on. It'll work for another couple minutes, then die again and need to be reset. Bluetooth stays connected the whole time and never drops. It's just the Wi-Fi that gets dropped. If I turn Bluetooth off and just listen via phone speaker or wired headphones, no problem, Wi-Fi can cruise all day.
The research I've done suggested that 2.4GHz might be causing a problem, but my network is 5GHz. Another suggestion was to switch the phone to a static IP address, that didn't help. I'd also read that Android has problems with IPv6, so I went to disable that in my router and discovered that it's never been on.
So, I found three solutions on my own, and none of them worked. Now it's time to reach out to the brain trust here. Does anyone have any idea what might be the problem? Vanilla S7, no root or ROMs. Thanks!
Click to expand...
Click to collapse
Have you tried the usual first step in troubleshooting, have you tried booting to recovery and wiping the cache partition?
You can also try flashing the stock firmware for your model number via Odin.
Sent from my LGL84VL using Tapatalk
Hey guys,
So basically I drive a 2016 Volvo V70 (car model not so important tbh) and before I got my Galaxy N20U I used to have an iPhone 8+.
At the time when I connected it to my car's bluetooth system, things used to run quite perfectly when playing music. Using the car's buttons I could rewind and fast-forward songs by pressing and holding in apps like Spotify.
Now with the Galaxy N20U, answering calls works sorta well, and I can skip songs forwards and backwards by short-pressing the car buttons, BUT I can't "slide" or "seek" the tracks, as in fast-forward or backwards, like I used to be able to do with the iPhone. I did all sorts of basic troubleshooting like unpairing and repairing the phone, resetting, trying other music players; but the problem still persists.
I messed around with the bluetooth connection type in Developer Mode settings on the Galaxy, but tbh I don't really understand what the settings mean or which one should be right. I'm not really aware what bluetooth version my car has either, but I think it would be an older version since it's 2014-2016 technology.
How can I fix it or tune the settings of the Galaxy in order to solve this? Or are there any apps I could install which fixes this issue?
Another problem with the Galaxy's BT connection is with my Windows 10 laptop. It's a pretty new laptop (HP Spectre 15 x360 2019) running the latest version of Windows 10.
Basically I did what everyone would do and I linked my Samsung to Windows, so I could have a similar continuity experience like Mac/iPhones have, like having a stable and automatic connection, picking up calls and texts from your laptop, and most importantly that your phone shares hotspot automatically through Bluetooth tethering when you're outside of home.
I tried several things like linking and unlinking through Microsoft's "Link Your Phone", and even tried with Samsung's Dex. I tried with both functions on, or one of them being unlinked.
The problem still persists, that it's not an automated and constant connection between the laptop and the phone, and that especially when it comes to automatic bluetooth tethering; then I always have to do it manually through clicking through several menus on Windows and creating an Access Point connecting to Bluetooth like some sort of a LAN connection. Every single time. And even when this connection is established, I'd see a LAN icon on the status bar (instead of signal bars) and when I expand the menu, it doesn't even list the current connection it is on (like "Samsung bla bla bla: Connected"). Instead I just get nearby WiFi networks and that it's searching. I DO get internet though and it works fine for the most part, but once I leave the room and the phone gets out of the range, or I put the laptop to standby, then I have to repeat the process all over again.
Even when I opt to sharing internet from my phone to the laptop through normal WiFi hotspot, I notice that the connection drops frequently.
To summarize, when it comes to both the car and my laptop, my Galaxy N20U does connect to them and offers the basic functionalities of the BT connection, BUT it misses other basic functionalities and it tends to be a half-baked, unstable connection.
Please help me out with this! Running the latest versions of softwares on all the named devices here.
For now turn off Developer options.
Clear the system cache on the boot menu
Reset network connections.
Pretty harmless and it may fix it...
dont have that problem