Database Info

Emergency, need proper RUU for One S Ville/s4

hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days

hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei: 352103050279088
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD

khan.orak said:
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:

hogol said:
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:
Click to expand...
Click to collapse
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165

khan.orak said:
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165
Click to expand...
Click to collapse
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?

hogol said:
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?
Click to expand...
Click to collapse
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD

khan.orak said:
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc

hogol said:
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc
Click to expand...
Click to collapse
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening

hogol said:
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening
Click to expand...
Click to collapse
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD

many mpurnm
khan.orak said:
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:

hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.

khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
Click to expand...
Click to collapse
yes done it twice
thing is
after it said done in command prompt, the green progressbar wouldn't leave, i mean it was stuck at the green progress bar
the thing is, i waited for a while for it to finish, a lil bit was left at the end in the progressbar, but it said done in command prompt
so after a lot of waiting, i just hard reset it, but after that the phone is not booting into bootloader and not responding at all
what is happening?

khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.
Click to expand...
Click to collapse
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is

hogol said:
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is
Click to expand...
Click to collapse
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.

khan.orak said:
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.
Click to expand...
Click to collapse
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??

hogol said:
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??
Click to expand...
Click to collapse
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.

khan.orak said:
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.
Click to expand...
Click to collapse
cant believe this is happening to me
phone wont even respond to charging, absolutely nothing...
i dont know what to do now :crying:

ota/ruu
hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
this is where i found what vi needed http://androidruu.com/?developer=Ville

Tried to convert to GPE, stuck in Fastboot

Hi,
A couple of weeks ago I got a new HTC One M8 Verizon from amazon. I bought it cause I wanted to covert it to GPE. After looking for some tutorials I decided to try the one described in this youtube video:
" How To: Convert HTC One M8 to Google Play Edition (5.0.1 Lollipop) with OTA Updates! " from MaowDroid - Since I'm a new user I can't post links, so I posted the video full name so you can look for it.
Later on I discovered I missed the " GSM Device (Not Sprint or Verizon) " legend in the video description. Very stupid of me! Anyway, everything went smooth until I flashed the image, then after restarting the device nothing happened and all I can do is to turn off the phone. If I choose HBOOT -> Recovery, the phone restarts. Same thing happens if I choose HBOOT -> Factory Reset.
Besides this video was not for my verizon device... I'm almost sure my second mistake was not to update the firmware before doing the whole process.. changing CID, ModelID and flashing the GPE image. I've been looking how to fix this but since I can't boot the OS I haven't been able to change the ModelID or CID, so whenever I've tried to flash a different image I get an error that says something about incorrect values, which from what I've learned in this process, its because those images are for different ModelID and CID values.
After that I asked for help in Android Forums ( http ://androidforums.com/threads/htc-one-m8-tried-to-convert-to-gpe-stuck-in-fastboot.931142/ ), where EarlyMon is being really nice and tried to help me resolve this issue. However it seems my problem is more difficult, so he suggested me to ask here so that we get more opinions to avoid making a fatal mistake. In summary, EarlyMon asked me to
1. flash recovery twrp-2.8.7.0-m8.img
2. Mount and Install ViperOneM8 4.3.0
Which I tried but at the end I get a Status 7 Error
-- Delete the spaces between "http:" and "//" --
http ://s13.postimg.org/4ktywhmzr/htconem8_Viper_One_M8_Error_Status7.jpg
Can you help me go to GPE or at least to Sense?
Any help will be really appreciated.
Thanks in advance.
PS.
This is my "fastboot getvar all" result and a picture of how fastboot looks when turning on or restarting the phone.
Code:
C:\Users\MIROSCAR\Desktop\HTC\miniadb_v1031>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.A13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.04.1700.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: eee2521c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.017s
Fastboot Image
-- Delete the spaces between "http:" and "//" --
http ://s24.postimg.org/ag2jj3jn9/htconem8fastboot.jpg

karlangazz said:
Hi,
A couple of weeks ago I got a new HTC One M8 Verizon from amazon. I bought it cause I wanted to covert it to GPE. After looking for some tutorials I decided to try the one described in this youtube video:
" How To: Convert HTC One M8 to Google Play Edition (5.0.1 Lollipop) with OTA Updates! " from MaowDroid - Since I'm a new user I can't post links, so I posted the video full name so you can look for it.
Later on I discovered I missed the " GSM Device (Not Sprint or Verizon) " legend in the video description. Very stupid of me! Anyway, everything went smooth until I flashed the image, then after restarting the device nothing happened and all I can do is to turn off the phone. If I choose HBOOT -> Recovery, the phone restarts. Same thing happens if I choose HBOOT -> Factory Reset.
Besides this video was not for my verizon device... I'm almost sure my second mistake was not to update the firmware before doing the whole process.. changing CID, ModelID and flashing the GPE image. I've been looking how to fix this but since I can't boot the OS I haven't been able to change the ModelID or CID, so whenever I've tried to flash a different image I get an error that says something about incorrect values, which from what I've learned in this process, its because those images are for different ModelID and CID values.
After that I asked for help in Android Forums ( http ://androidforums.com/threads/htc-one-m8-tried-to-convert-to-gpe-stuck-in-fastboot.931142/ ), where EarlyMon is being really nice and tried to help me resolve this issue. However it seems my problem is more difficult, so he suggested me to ask here so that we get more opinions to avoid making a fatal mistake. In summary, EarlyMon asked me to
1. flash recovery twrp-2.8.7.0-m8.img
2. Mount and Install ViperOneM8 4.3.0
Which I tried but at the end I get a Status 7 Error
-- Delete the spaces between "http:" and "//" --
http ://s13.postimg.org/4ktywhmzr/htconem8_Viper_One_M8_Error_Status7.jpg
Can you help me go to GPE or at least to Sense?
Any help will be really appreciated.
Thanks in advance.
PS.
This is my "fastboot getvar all" result and a picture of how fastboot looks when turning on or restarting the phone.
Code:
C:\Users\MIROSCAR\Desktop\HTC\miniadb_v1031>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.A13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.04.1700.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: eee2521c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.017s
Fastboot Image
-- Delete the spaces between "http:" and "//" --
http ://s24.postimg.org/ag2jj3jn9/htconem8fastboot.jpg
Click to expand...
Click to collapse
You can boot to hboot correct? First change CID back to Verizon, you can do this in hboot (bootloader)
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
Then try flashing the Verizon RUU
http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473

andybones said:
You can boot to hboot correct? First change CID back to Verizon, you can do this in hboot (bootloader)
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
Then try flashing the Verizon RUU
http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473
Click to expand...
Click to collapse
Hi,
Ok, but, maybe a dumb question but which S-OFF RUU version should I use (4.4.4, 4.4.3, 4.4.2 ) ?
Thanks for your help man!

karlangazz said:
Hi,
Ok, but, maybe a dumb question but which S-OFF RUU version should I use (4.4.4, 4.4.3, 4.4.2 ) ?
Thanks for your help man!
Click to expand...
Click to collapse
I'd use the latest 5.0.1

andybones said:
I'd use the latest 5.0.1
Click to expand...
Click to collapse
Hi,
I just tried the 5.0.1 RUU.
First I changed the CID as instructed.
Then I renamed and copied the zip file to the SD as suggested in the ROM instructions.
Rebooted and choosed HBOOT, the ROM is detected but, after a few minutes I get a " Update Fail! " error.
https ://drive.google.com/file/d/0BwRKcAC_V-OscVVhMjdNbHUyRkk/view?usp=sharing
Am I doing something wrong?

karlangazz said:
Hi,
I just tried the 5.0.1 RUU.
First I changed the CID as instructed.
Then I renamed and copied the zip file to the SD as suggested in the ROM instructions.
Rebooted and choosed HBOOT, the ROM is detected but, after a few minutes I get a " Update Fail! " error.
https ://drive.google.com/file/d/0BwRKcAC_V-OscVVhMjdNbHUyRkk/view?usp=sharing
Am I doing something wrong?
Click to expand...
Click to collapse
Honestly not too sure, hopefully someone more information than myself can chime in. Keep in mind this is just what I'd do. Anything you choose to do with your device is your choice.
maybe try changing cid to supercid
i think supercid will fix it
---------- Post added at 05:32 PM ---------- Previous post was at 05:18 PM ----------
karlangazz said:
Hi,
I just tried the 5.0.1 RUU.
First I changed the CID as instructed.
Then I renamed and copied the zip file to the SD as suggested in the ROM instructions.
Rebooted and choosed HBOOT, the ROM is detected but, after a few minutes I get a " Update Fail! " error.
https ://drive.google.com/file/d/0BwRKcAC_V-OscVVhMjdNbHUyRkk/view?usp=sharing
Am I doing something wrong?
Click to expand...
Click to collapse
Yea try supercid, then ruu again
fastboot oem writecid 1111111

andybones said:
Honestly not too sure, hopefully someone more information than myself can chime in. Keep in mind this is just what I'd do. Anything you choose to do with your device is your choice.
maybe try changing cid to supercid
i think supercid will fix it
---------- Post added at 05:32 PM ---------- Previous post was at 05:18 PM ----------
Yea try supercid, then ruu again
fastboot oem writecid 1111111
Click to expand...
Click to collapse
Hi,
I just changed to superCID, I just looked it up somewhere else cause I think yours was missing a 1.
So I changed my CID to superCID,
Rebooted and selected HBOOT.
I got the same error.
https ://drive.google.com/file/d/0BwRKcAC_V-OsZDZpQW5TV1dIU0U/view?usp=sharing
Hoperfully someone else may have some other ideas.
Thanks a lot for your help man!
All your suggestions are welcomed!

karlangazz said:
Hi,
I just changed to superCID, I just looked it up somewhere else cause I think yours was missing a 1.
So I changed my CID to superCID,
Rebooted and selected HBOOT.
I got the same error.
https ://drive.google.com/file/d/0BwRKcAC_V-OsZDZpQW5TV1dIU0U/view?usp=sharing
Hoperfully someone else may have some other ideas.
Thanks a lot for your help man!
All your suggestions are welcomed!
Click to expand...
Click to collapse
Install team viewer and pm me the details with a good time to screen share and fix your phone.
Sent from my HTC6535LVW using Tapatalk

dottat said:
Install team viewer and pm me the details with a good time to screen share and fix your phone.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
Thanks a lot for your help man!
The phone is now back to Sense and working!
I'll follow your advice and stick to ROMs no GPE!
Again, thank you very much for helping me save my device!
Regards!

karlangazz said:
Thanks a lot for your help man!
The phone is now back to Sense and working!
I'll follow your advice and stick to ROMs no GPE!
Again, thank you very much for helping me save my device!
Regards!
Click to expand...
Click to collapse
No problem man. Always glad to help!
Sent from my HTC6535LVW using Tapatalk

dottat said:
No problem man. Always glad to help!
Click to expand...
Click to collapse
Nicely done, magic.

Do anyone have DUGL Asia RUU 2.42.400.6?

Hello U11 users,
First, sorry for my bad English...
I think I've messed my U11 up. I've flashed Lineage OS 15 on my phone(bootloader unlocked), after that I've booted into download mode and relock the bootloader. Now my phone cannot boot, only can go to downloa mode and RUU mode.
So my phone is messed up now, I think RUU is my last bet before send it to repair. I cannot find the correct RUU version for my phone in the RUU collection thread, so just want to know anybody in this forum has a RUU for my model?
Here's 'fastboot getvar all'
Code:
(bootloader) kernel: lk
(bootloader) product: htc_ocndugl
(bootloader) version: 1.0
(bootloader) max-download-size: 2399200000
(bootloader) serialno:
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei:
(bootloader) version-main: 2.42.400.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 8998-002772-1712011153
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PZC30000
(bootloader) cid: HTC__622
Any helps are appreciated!!
Thanks

cat explosion said:
Hello U11 users,
First, sorry for my bad English...
I think I've messed my U11 up. I've flashed Lineage OS 15 on my phone(bootloader unlocked), after that I've booted into download mode and relock the bootloader. Now my phone cannot boot, only can go to downloa mode and RUU mode.
So my phone is messed up now, I think RUU is my last bet before send it to repair. I cannot find the correct RUU version for my phone in the RUU collection thread, so just want to know anybody in this forum has a RUU for my model?
Here's 'fastboot getvar all'
Code:
(bootloader) kernel: lk
(bootloader) product: htc_ocndugl
(bootloader) version: 1.0
(bootloader) max-download-size: 2399200000
(bootloader) serialno:
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei:
(bootloader) version-main: 2.42.400.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 8998-002772-1712011153
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PZC30000
(bootloader) cid: HTC__622
Any helps are appreciated!!
Thanks
Click to expand...
Click to collapse
Edit; Just realized the link i posted was for the wrong RUU. Sorry. Ill update when i find the correct one for you.
Did you by chance change the cid number? HTC__622 comes back to the dual sim version from India.
Looks like the correct cid for your phone should be HTC__621 if it is indeed an Asia model. i may be wrong but thats what i can find so far with your info.
---------- Post added at 08:18 PM ---------- Previous post was at 08:05 PM ----------
sniper849 said:
Edit; Just realized the link i posted was for the wrong RUU. Sorry. Ill update when i find the correct one for you.
Did you by chance chance the cid number? HTC__622 comes back to the dual sim version from India.
Looks like the correct cid for your phone should be HTC__621 if it is indeed an Asia model. i may be wrong but thats what i can find so far with your info.
Click to expand...
Click to collapse
I would say try the India Model RUU for your phone first since thats what is in your phone info you've provided. i'm not an expert on this stuff by far but i do what i can. I've got a Dual Sim Model 128 gb model i'm using now that was from Taiwan originally. I believe it came with the Asian stock software but i changed the firmware to the European model shortly after i got S-Off. Good luck. :good:
Ruu Link for CID HTC__622 India Model
[url]https://androidfilehost.com/?fid=817550096634794434[/URL]
Ruu Link for CID HTC__621 Asia Model
[url]https://androidfilehost.com/?fid=673791459329059961[/URL]
Run the RUU program. Let the phone take the OTA updates. After they are completed you should be back to Firmware version 2.42.400.6.
Or you could download the OTA's manually if you dont want to wait for that of course.
Original Post Here
[url]https://forum.xda-developers.com/showpost.php?p=72425204&postcount=2[/URL]
Link to OTA Updates.
[url]https://docs.google.com/spreadsheets/d/15JL3tRWDSVOUKo_revEYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit#gid=1230163516[/URL]
I take no credit for these posts. Just sharing the info. Maybe @5m4r7ph0n36uru could help out since that's the owner of the posts i shared.

Thanks for the reply, I didn't change the cid and mid, it is a s-on device.
Can I flash a lower version RUU without adb to it and change the system version partition?

cat explosion said:
Thanks for the reply, I didn't change the cid and mid, it is a s-on device.
Can I flash a lower version RUU without adb to it and change the system version partition?
Click to expand...
Click to collapse
As far as I know you should be able to flash the lower version RUU without any issues. I don't believe there is a stand alone version of the RUU that doesn't require adb. You can flash it from an sd card though. I'll post a link with a guide on how to do it.
https://forum.xda-developers.com/showpost.php?p=72425224&postcount=5

sniper849 said:
As far as I know you should be able to flash the lower version RUU without any issues. I don't believe there is a stand alone version of the RUU that doesn't require adb. You can flash it from an sd card though. I'll post a link with a guide on how to do it.
https://forum.xda-developers.com/showpost.php?p=72425224&postcount=5
Click to expand...
Click to collapse
Hi there, thanks again for the tips.
But it don't work for me neither flashing RUU by fastboot nor sdcard...
I'll send it to HTC service center if they want to help me...:crying:

I'm very happy with HTC's policy and warranty service, they only used 30mins to unbrick my device without charges:angel:

Request HELP for ZIP, single IMG or just S-OFF

I'm starting this thread, cause I have been responding on others threads and that's deviates from the main topic and is not fair to the O.P.
This thread is for request help, partial or full ZIP files, single images or just for S-OFF Request.
Please, provide the question and paste your phone info, by typing: fastboot getvar all
Exemple:
My phone doesn't boot, can I go back to stock?
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT7120403511
(bootloader) imei: please, no IMEI
(bootloader) version-main: 1.32.651.11
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: SPCS_001
I will do my part in my time with you to help you resolve the problem.

HELP! I wasn't able to boot after a seemingly harmless TWRP hard reset(the one where it asks to writ "yes" to confirm), it kept restarting into bootloader mode, so decided to flash the ZIP that you provided in the other thread, as it wasn,t meant for 2PYB20000, i changed my MID to 2PYB10000. It flashed fine, phone turned on, but there were no cellular signals or wifi after reboot, phone doesnt shows it imei in system nor does it shows baseband version.
so far i have tried flashing a proper 2pyb20000 ruu zip, formating the persist partion, then directly rebooting to download mode and reflashing the ruu. but the issue stayed the same.
Please help me solve this issue.
Here are the details.
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT6AX0401703
(bootloader) current-slot:
(bootloader) imei: Removed
(bootloader) version-main: 1.33.425.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.02_U114401031_125.01.70524G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: 11111111

zain rizvi said:
HELP! I wasn't able to boot after a seemingly harmless TWRP hard reset(the one where it asks to writ "yes" to confirm), it kept restarting into bootloader mode, so decided to flash the ZIP that you provided in the other thread, as it wasn,t meant for 2PYB20000, i changed my MID to 2PYB10000. It flashed fine, phone turned on, but there were no cellular signals or wifi after reboot, phone doesnt shows it imei in system nor does it shows baseband version.
so far i have tried flashing a proper 2pyb20000 ruu zip, formating the persist partion, then directly rebooting to download mode and reflashing the ruu. but the issue stayed the same.
Please help me solve this issue.
Here are the details.
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT6AX0401703
(bootloader) current-slot:
(bootloader) imei: Removed
(bootloader) version-main: 1.33.425.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.02_U114401031_125.01.70524G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: 11111111
Click to expand...
Click to collapse
What a mess!
for 2PYB20000, i changed my MID to 2PYB10000. It flashed fine, phone turned on, but there were no cellular signals or wifi after reboot, phone doesnt shows it imei in system nor does it shows baseband version
Click to expand...
Click to collapse
So... you try to convert a BOLT to EVO.
Need to change ID model to 2PYB10000;
Flash latest Europe Version 1.31.404.1;
Flash radio.img from latest Sprint WWE 1.32.651.11 in bootloader.
You just nedded to flash the radio.img from Sprint through fastboot mode to get back the IMEI.

b8engl said:
What a mess!
So... you try to convert a BOLT to EVO.
Need to change ID model to 2PYB10000;
Flash latest Europe Version 1.31.404.1;
Flash radio.img from latest Sprint WWE 1.32.651.11 in bootloader.
You just nedded to flash the radio.img from Sprint through fastboot mode to get back the IMEI.
Click to expand...
Click to collapse
Sort of did that, but flashed the latest sprint stock FW first, so had to do the whole unlocking procedure myself to get it sim unlocked. Then flashed the european latest WWE FW and flashed the Sprint radio on top of it.
Thank a lot for the help man.

zain rizvi said:
Sort of did that, but flashed the latest sprint stock FW first, so had to do the whole unlocking procedure myself to get it sim unlocked. Then flashed the european latest WWE FW and flashed the Sprint radio on top of it.
Thank a lot for the help man.
Click to expand...
Click to collapse
No problem! I'm glad you figured it out.

S-OFF help
Code name: htc_aca
Model 2PYB2
Bootloader version: 1.0.0.0000
CID: SPCS_001
MID: 2PYB20000
Radio: [email protected]
Firmware: ACADIA_WHL_N70_SENSE80GP_SPCS
Kernel: Linux version 3.10.84-perf-gd701a0
Android version: 7.0
HTC Sense: 8.0
SDK Version: 24
Base: 1.32.651.11 8.0_g CL863776 release-keys
Firmware name: Bad Boyz Sprint HTC BOLT v2.1
---------- Post added at 02:06 AM ---------- Previous post was at 02:03 AM ----------
Code name: htc_aca
Model 2PYB2
Bootloader version: 1.0.0.0000
CID: SPCS_001
MID: 2PYB20000
Radio: [email protected]
Firmware: ACADIA_WHL_N70_SENSE80GP_SPCS
Kernel: Linux version 3.10.84-perf-gd701a0
Android version: 7.0
HTC Sense: 8.0
SDK Version: 24
Base: 1.32.651.11 8.0_g CL863776 release-keys
Firmware name: Bad Boyz Sprint HTC BOLT v2.1

b8engl said:
I'm starting this thread, cause I have been responding on others threads and that's deviates from the main topic and is not fair to the O.P.
This thread is for request help, partial or full ZIP files, single images or just for S-OFF.
Please, provide the question and paste your phone info, by typing: fastboot getvar all
Exemple:
My phone doesn't boot, can I go back to stock?
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT7120403511
(bootloader) imei: please, no IMEI
(bootloader) version-main: 1.32.651.11
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: SPCS_001
I will do my part in my time with you to help you resolve the problem.
Click to expand...
Click to collapse
Please help. I installed my twrp backup and now the sound, video playback, and the home/fingerprint sensor don't work. I guess it didn't backup right, to begin with. I really don't know. I'm new to this stuff, but its fun when it works. It's really kinda sad when it doesn't. My Mom just gave me this phone because it needed the screen replaced, but was in perfect condition otherwise and I really don't want her to know I wrecked it. I've been looking for days for a download. I pretty much understand the concept of how to make it work if I had the download. I have adb installed and working and the phone is detected.
Htc 10 Evo UNLOCKED S-ON
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT6C30401953
(bootloader) current-slot:
(bootloader) imei: removed
(bootloader) version-main: 1.38.615.7
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: BS_US001

MaxGor80 said:
Code name: htc_aca
Model 2PYB2
Bootloader version: 1.0.0.0000
CID: SPCS_001
MID: 2PYB20000
Radio: [email protected]
Firmware: ACADIA_WHL_N70_SENSE80GP_SPCS
Kernel: Linux version 3.10.84-perf-gd701a0
Android version: 7.0
HTC Sense: 8.0
SDK Version: 24
Base: 1.32.651.11 8.0_g CL863776 release-keys
Firmware name: Bad Boyz Sprint HTC BOLT v2.1
Click to expand...
Click to collapse
I can see that you have a custom ROM, why do you need security-off?

kentuckylovely said:
Please help. I installed my twrp backup and now the sound, video playback, and the home/fingerprint sensor don't work. I guess it didn't backup right, to begin with. I really don't know. I'm new to this stuff, but its fun when it works. It's really kinda sad when it doesn't. My Mom just gave me this phone because it needed the screen replaced, but was in perfect condition otherwise and I really don't want her to know I wrecked it. I've been looking for days for a download. I pretty much understand the concept of how to make it work if I had the download. I have adb installed and working and the phone is detected.
Click to expand...
Click to collapse
Well...let me see if I can help you with that!
kentuckylovely said:
Htc 10 Evo Bolt UNLOCKED S-ON
(bootloader) kernel: lk
(bootloader) product: htc_acawhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1141600000
(bootloader) serialno: HT6C30401953
(bootloader) current-slot:
(bootloader) imei: removed
(bootloader) version-main: 1.38.615.7
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PYB20000
(bootloader) cid: BS_US001
Click to expand...
Click to collapse
So, for BOLT version. Download link here.

b8engl said:
Well...let me see if I can help you with that!
So, for BOLT version. Download link
Had to remove download link before I could post.
Thank you trying to help so far, but I'm still having problems.
PS C:\WINDOWS\System32\WindowsPowerShell\v1.0> fastboot flash recovery "C:\Users\sherry\Downloads\2PYBIMG_ACADIA_WHL_N70
_SENSE80G[email protected]70303_CNV_1.78_003_release_518263_signed_2_4.zip"
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 664647066 is not a multiple of the block size 4096
Sending sparse 'recovery' 1/2 (1048573 KB) error: write_sparse_skip_chunk: don't care size 664647066 is not a mu
ltiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 664647066 is not a multiple of the block size 4096
OKAY [ 93.072s]
Writing sparse 'recovery' 1/2 (bootloader) HOSD CL#992875
(bootloader) [email protected]
(bootloader) ERR image is not valid
(bootloader) [email protected]
(bootloader) [email protected]
Finished. Total time: 173.905s
Finished. Total time: 1
Click to expand...
Click to collapse

kentuckylovely said:
PS C:\WINDOWS\System32\WindowsPowerShell\v1.0> fastboot flash recovery "C:\Users\sherry\Downloads\2PYBIMG_ACADIA_WHL_N70
_SENSE80G[email protected]70303_CNV_1.78_003_release_518263_signed_2_4.zip"
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 664647066 is not a multiple of the block size 4096
Sending sparse 'recovery' 1/2 (1048573 KB) error: write_sparse_skip_chunk: don't care size 664647066 is not a mu
ltiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 664647066 is not a multiple of the block size 4096
OKAY [ 93.072s]
Writing sparse 'recovery' 1/2 (bootloader) HOSD CL#992875
(bootloader) [email protected]
(bootloader) ERR image is not valid
(bootloader) [email protected]
(bootloader) [email protected]
Finished. Total time: 173.905s
Finished. Total time: 1
Click to expand...
Click to collapse
I don't know what you are trying to do...
Just rename the file to 2PYBIMG, place in a formated fat32 microSD card, then after inserted the card to phone reboot to download mode. It will update it self!

No matter what I do it says the file is corrupt. Am I doing something wrong? I named it 2PYBIMG.zip and added it to my card but it doesn't start when I boot into download mode. I tried flashing it with twrp and it says it's corrupted.
Sent from my HTC Bolt using XDA Labs

kentuckylovely said:
No matter what I do it says the file is corrupt. Am I doing something wrong? I named it 2PYBIMG.zip and added it to my card but it doesn't start when I boot into download mode. I tried flashing it with twrp and it says it's corrupted.
Click to expand...
Click to collapse
You have TWRP, so bootloader unlocked... then, you need to lock it! You can only do this if you have security off, which is not the case here!
- fastboot oem lock ( this will relock the bootloader );
- fastboot oem rebootRUU ( switch the state to update firmware trough USB );
- fastboot flash zip 2PYBIMG.zip.
You need to verify if you don't have ex: 2PYBIMG.zip ( if that is the case, just select the file press F2 and rename it again to 2PYBIMG ).

b8engl said:
You have TWRP, so bootloader unlocked... then, you need to lock it! You can only do this if you have security off, which is not the case here!
- fastboot oem lock ( this will relock the bootloader );
- fastboot oem rebootRUU ( switch the state to update firmware trough USB );
- fastboot flash zip 2PYBIMG.zip.
You need to verify if you don't have ex: 2PYBIMG.zip ( if that is the case, just select the file press F2 and rename it again to 2PYBIMG ).
Click to expand...
Click to collapse
So I can't even get my phone to go into android now to atempt to get s-off state. Is it a hopeless case now?
Sent from my HTC Bolt using XDA Labs
---------- Post added at 11:46 AM ---------- Previous post was at 11:42 AM ----------
kentuckylovely said:
So I can't even get my phone to go into android now to atempt to get s-off state. Is it a hopeless case now?
Click to expand...
Click to collapse
Also, your download would not unzip, but I found the file somewhere else and bought it and it unzipped ok so I think your file is corrupted somehow. If anyone needs the file I can upload it sometime, my internet is pretty slow so I'm not sure when. But if someone sees this and needs it let me know. I'm just totally at a loss here with my phone though.
Sent from my HTC Bolt using XDA Labs

kentuckylovely said:
Also, your download would not unzip, but I found the file somewhere else and bought it and it unzipped ok so I think your file is corrupted somehow.
Click to expand...
Click to collapse
Because the file is encrypted, that's normal!

b8engl said:
Because the file is encrypted, that's normal!
Click to expand...
Click to collapse
I'm sorry if I offended you. I didn't know it wouldn't open because of that. But is my phone hopeless now?
Sent from my HTC Bolt using XDA Labs
---------- Post added at 11:55 AM ---------- Previous post was at 11:55 AM ----------
kentuckylovely said:
I'm sorry if I offended you. I didn't know it wouldn't open because of that. But is my phone hopeless now?
Click to expand...
Click to collapse
Thank you for trying to help me.
Sent from my HTC Bolt using XDA Labs

kentuckylovely said:
I'm sorry if I offended you. I didn't know it wouldn't open because of that.
Click to expand...
Click to collapse
Take it easy! You didn't offend me in any way.
kentuckylovely said:
Thank you for trying to help me.
Click to expand...
Click to collapse
Well... this is difficult because you don't compreend some basic functions. I recomend that you search purhaps youtube or read some more on some forum. Because I alredy sent the correct file! You only need to do the steps correctly to get back the phone again.
Please, don't repost the same issue on the thread. Just send me a private message, I will respond through there.

b8engl said:
What a mess!
So... you try to convert a BOLT to EVO.
Need to change ID model to 2PYB10000;
Flash latest Europe Version 1.31.404.1;
Flash radio.img from latest Sprint WWE 1.32.651.11 in bootloader.
You just nedded to flash the radio.img from Sprint through fastboot mode to get back the IMEI.
Click to expand...
Click to collapse
what will be the command to flash the radio.img ?????
---------- Post added at 03:49 PM ---------- Previous post was at 03:28 PM ----------
how to get S-OFF because it in S-ON HTC 10 evo
no fastboot flashing possible friends
CID-HTC__059
MID-2PYB20000
OS-1.33.425.6

Sanaullahshuaib said:
how to get S-OFF because it in S-ON HTC 10 evo
no fastboot flashing possible friends
CID-HTC__059
MID-2PYB20000
OS-1.33.425.6
Click to expand...
Click to collapse
If you have # you could try dd command!
Also you can get S-OFF easily with this service on eBay.

No root so how dd method

HTC U11 Battery issue

Hello,
Hope someone can help me, I've read through alot of posts before asking, I have a strange issue. When my EU HTC U11 Unlocked S-ON is turned off and plugged in the battery charge icon always show as empty with the red light, fastboot see's it as empty, so I can't flash anything that way, I get RU_BATTERY_LOW error.
(bootloader) kernel: lk
(bootloader) product: htc_ocnuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1562400000
(bootloader) serialno: FA76N1800376
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei:
(bootloader) version-main: 2.33.401.10
(bootloader) boot-mode: download
(bootloader) version-baseband: 8998-002772-1711161638
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PZC10000
(bootloader) cid: HTC__034
Appreciate any guidance on this issue.
Thank you.

If possible could someone provide me with links so I can try another DSP, RADIO, Bluetooth TWRP backup.
DSP is showing as UNKNOWN on the Fastboot download screen.
Oreo_WWE_Single_and_Dual_SIM_Radio_BT_and_DSP
Oreo_Radio_BT_DSP_TWRP_Flashable_v2_Euro
I tired these via TWRP with no luck.
Any help would be appreciated.

Try to flash the same DSP from my post - https://forum.xda-developers.com/showpost.php?p=80620553&postcount=1267

Golv said:
Try to flash the same DSP from my post - https://forum.xda-developers.com/showpost.php?p=80620553&postcount=1267
Click to expand...
Click to collapse
Thanks for the response, I'm stuck at the moment because I flashed a stock image from TWRP, which wiped out TWRP and root. So now I can't fastboot images at all due to the incorrect battery level.
Any ideas are welcome.
Glad this is a old phone

littledaga said:
Thanks for the response, I'm stuck at the moment because I flashed a stock image from TWRP, which wiped out TWRP and root. So now I can't fastboot images at all due to the incorrect battery level.
Any ideas are welcome.
Glad this is a old phone
Click to expand...
Click to collapse
Try to flash RUU for your cid (2.33.401.10 for SINGLE SIM)
You will lose all data on internal card and all user applications along with the settings, so make backup before!
Go to https://forum.xda-developers.com/u11/how-to/collection-htcu-u11-ruu-firmware-t3612048
This is your RUU - https://androidfilehost.com/?fid=746010030569951433

Golv said:
Try to flash RUU for your cid (2.33.401.10 for SINGLE SIM)
You will lose all data on internal card and all user applications along with the settings, so make backup before!
Go to https://forum.xda-developers.com/u11/how-to/collection-htcu-u11-ruu-firmware-t3612048
This is your RUU - https://androidfilehost.com/?fid=746010030569951433
Click to expand...
Click to collapse
When I try to flash RUU from sdcard I get RU_BATTERY_LOW please connect charger (0% < 30%) even though the battery shows 70% charge in the OS.

littledaga said:
When I try to flash RUU from sdcard I get RU_BATTERY_LOW please connect charger (0% < 30%) even though the battery shows 70% charge in the OS.
Click to expand...
Click to collapse
Try to flash hosd_signed.img from this firmware (2.33.401.10 for SINGLE SIM) before ruu flash.
- In bootloader mode run in command line:
Code:
fastboot flash hosd hosd_signed.img
Then reboot in Download mode and flash ruu again.

Golv said:
Try to flash hosd_signed.img from this firmware (2.33.401.10 for SINGLE SIM) before ruu flash.
- In bootloader mode run in command line:
Code:
fastboot flash hosd hosd_signed.img
Then reboot in Download mode and flash ruu again.
Click to expand...
Click to collapse
Thanks alot, flashing the hosd fixed the incorrect battery level.
And RUU and TWRP flash now without issues.