Yu5010 dead {hardbrick} - YU Yuphoria

Sir when I connect my YU5010A it's shows QHSUSB-BULK in Device Manager. And Once Connect PC Install Drivers Qualcomm Stuck PC not RespondPc Any thing Keyboard or Mouse Totally Stop PC Working. When Remove Device. But Not Disconnect Ports Under Qualcomm 9008 After Restart Pc WORKING Fine when Device connect Same Issue { sorry For My English }
Sent from my YUREKA using Tapatalk

Just do a clean install of Windows in your PC. Also do you have qfil signed rom n drivers n qpst

Sir Same problem
Sent from my AO5510 using Tapatalk

Please instructions sir
Sent from my AO5510 using Tapatalk

Reviewing Hardbrik
joeshi said:
Sir when I connect my YU5010A it's shows QHSUSB-BULK in Device Manager. And Once Connect PC Install Drivers Qualcomm Stuck PC not RespondPc Any thing Keyboard or Mouse Totally Stop PC Working. When Remove Device. But Not Disconnect Ports Under Qualcomm 9008 After Restart Pc WORKING Fine when Device connect Same Issue { sorry For My English }
Sent from my YUREKA using Tapatalk
Click to expand...
Click to collapse
Follow the steps shown in following thread
Reviewing Hardbrik
And For Firmware and all tools click Above download link (QPST, Qualquam Driver etc. Firehose file, rawprogrammer.xml, Patch.xml and everthinhg)
Download Tools and YU5010a/ YU5010 Firmware
And if you are having some problem with windows. Plz do clean installation.
:good::good:

Test win7 & win 10 which one choose os
Sent from my AO5510 using Tapatalk

Use win7. I have personally tried on both 32 n 64 bit os.

Yu5010A hardbricked couldn't detect in PC shows only ANDROID BOOTLOADER INTERFACES
palashsoni08 said:
Follow the steps shown in following thread
Reviewing Hardbrik
And For Firmware and all tools click Above download link (QPST, Qualquam Driver etc. Firehose file, rawprogrammer.xml, Patch.xml and everthinhg)
Download Tools and YU5010a/ YU5010 Firmware
And if you are having some problem with windows. Plz do clean installation.
:good::good:
Click to expand...
Click to collapse
Yu5010A couldn't detect in PC please tell me how to proceed

Related

Galaxy Fit GT 5670 USB Driver?

Hi all.
Me Very Need Galaxy Fit GT 5670 USB Driver.
install kies you will have the USB drivers
and next time use search
Yes Me install kies But not Work.
for what purpose do you want them for adb they are different, for normal use they are installed with kies
what is the type of PC x64 or x86
OS : Win 7 x86 UL.
Show Me connecting in Mobile but Not connect.
OK but what do you want to connect
flashing through Odin
using mass storage
using adb
or what
Anyway download USB Drivers from here, if that doesn't work.
Answer his question
dheeraj (dhlalit11) said:
OK but what do you want to connect
flashing through Odin
using mass storage
using adb
or what
Click to expand...
Click to collapse
or you can download samsung usb driver here....mediafire link..
just download it then extract then install the driver...
mediafire link not work.
i'm so sorry bro...
please try this
Go to creeds roms first page and there in the installation procedure you will find the link for samsung usb drivers. It works 100%
Not Working Me Install But firmware update rest Mobile show me downloading but not next item.
Why?
i want flashing through odin but driver is not recognizing the device so please guide
dheeraj (dhlalit11) said:
OK but what do you want to connect
flashing through Odin
using mass storage
using adb
or what
Click to expand...
Click to collapse
i want to flashing odin but driver is not recognizing the device so please guide me [B[/B]
aadarsh verma said:
i want to flashing odin but driver is not recognizing the device so please guide me [B[/B]
Click to expand...
Click to collapse
You need to look for new drivers
aadarsh verma said:
i want to flashing odin but driver is not recognizing the device so please guide me [B[/B]
Click to expand...
Click to collapse
Also try connecting to a computer which has USB 2.0 ports. My laptop which only has USB 3.0 ports cannot connect to the S5670 via Odin.

[Q] SP tools stuck at Searching

I have a Canvas 2 ..I downloaded the drivers,the firmware and sp tools and I followed the procedure and clicked on "Firmware upgrade" then I switched off my device and plugged it but it doesn't start the flashing process.
In the bottom bar it says "searching" and doesn't change at all !
What do I do ?
My device is not rooted or neither had a CWM and i don't want to root also !
Now what should I do to get my device updated with official stock jellybean ?
In the bottom bar it says "searching" and doesn't change at all !
I think , u switch off the device and connect the USB after it says searching
Sent from my Micromax A110 using xda app-developers app
venu007 said:
I think , u switch off the device and connect the USB after it says searching
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
Yeah ! I did that only but still it says "searching"
Vishrut Chhajer said:
Yeah ! I did that only but still it says "searching"
Click to expand...
Click to collapse
Bro I to had a similar problem
1)if you have drivers of any other android it doesn't work in my case install samsung kies
2)use drivers of mobistel cynus t2 drivers for best results
Hit thanks if helped
See I have these drivers installed.
1) Samsung USB Driver ...since I have a Galaxy ace also.
2) Micromax Driver which is found in the mobile itself when connected to the pc
3) Mobistel driver
4) VCOM driver
that's all ...why one of them should I uninstall ?
Vishrut Chhajer said:
See I have these drivers installed.
1) Samsung USB Driver ...since I have a Galaxy ace also.
2) Micromax Driver which is found in the mobile itself when connected to the pc
3) Mobistel driver
4) VCOM driver
that's all ...why one of them should I uninstall ?
Click to expand...
Click to collapse
Uninstall Samsung driver bro couple of days back while flashing through flash tools it keeps searching before that no problem I have remembered that I have installed drivers using kies to flash through odin jst tried uninstalling kies and samsung drivers my problem solved
Sent from my hyperion rom
install mediatek vcom drivers...dats it.
Dj_cool said:
install mediatek vcom drivers...dats it.
Click to expand...
Click to collapse
Even after installing VCOM drivers ..I faced the same issue ...should I restart my pc and try or something ?
I don't know how but the problem got solved by clicking the DOWNLOAD BUTTON ! ...
Now i'm using jeallybean which is bloody fast.
Thanks anyway
SEARCHING
now i have the same problem..
windows 8.
all drivers are installed.
baterry removed n connected to pc via usb.. what else to do.. ???
Anyone
I have same problem. All drivers installed.
What should I do?
My mobile : Lenovo s650
Thanks

[Resolved] [Q] I hard bricked Lenovo A536 Mediatek/ MT6582Mdevice

I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
lenover9000 said:
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
Click to expand...
Click to collapse
Does it vibrates or display anything?
Tyaginator said:
Does it vibrates or display anything?
Click to expand...
Click to collapse
no. But I think it goes on '''META MODE'" ONLY on the computer for a few seconds.
Thanks for commenting.
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Tyaginator said:
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Click to expand...
Click to collapse
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
lenover9000 said:
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
Click to expand...
Click to collapse
U must have flashed some other device's firmware and which guide u have followed
Tyaginator said:
U must have flashed some other device's firmware and which guide u have followed
Click to expand...
Click to collapse
I used this one.
forums (dot) lenovo (dot) com/t5/A-and-P-Series/Lenovo-A536-stuck-during-firmware-upgrade/td-p/1744571[/url]
I downloaded the latest firmware from
"THIS is the latest original ROW firmware (PC Flash Tool installation)"
This whole guide was fine, it worked for me.
But the problem was when I tried to downgrade the firmware to an older version.
I tried to replace the lastest official firmware with this one ROM Android 4.4.2 (older official needrom(dot)com/download/lenovo-a536/
sorry can't link websites yet
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Tyaginator said:
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Click to expand...
Click to collapse
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
lenover9000 said:
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
Click to expand...
Click to collapse
Glad it's fixed
I Too Need help my lenovo a536 is bricked
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
prathamsd4 said:
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
Click to expand...
Click to collapse
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Tyaginator said:
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Click to expand...
Click to collapse
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
prathamsd4 said:
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
Click to expand...
Click to collapse
I don't think you need to connect phone during installing drivers and phone will stay connected after properly installing DA Vcom drivers
Sent from a Device using an App!
I have similar problem
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Lenovo A536
Please help me guys, where is GND and COLO point of lenovo a536
same problem
i have a lenovo a536 and when i flash the stock
it goes to a cycle of off and on , help me to fix this
ive tried a lot of stock roms i searched,and none of them worked , the cycle of turning off and on is still there

Xolo 8x 1000i (rooted) hard bricked, not charging , mediatek preloader driver not p

Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
ron2yee said:
Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
Click to expand...
Click to collapse
If you can see DA VCOM port when u connect the phone that means there is no need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Tyaginator said:
If you can see DA VCOM port when u connect the phone that means there is need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Click to expand...
Click to collapse
first of all thankx for your swift reply
and coming to the driver part.. i tried uninstalling the da drivers but it reverted to someother driver nit mtk preloader it had a different name.... whatsoever
and finally... my device is up and running its a miracle.... i kept it for a whole day and later i plugged in the charger and viola the phone was discharged and it started charging
also i have another problem with which i ll start a thread.. do keep an eye out please sir
thankx again [emoji4] [emoji4] [emoji4]
Sent from my 8x-1000i using Tapatalk

Micromax 4g volte spark vdeo, android 6.0.1

How can I root this marshmallow device? When I connect the device to PC in fastboot mode the screen goes white blank all it starts to connect as (qualcomm H's USB diagnostic 9091)
(qualcomm hs USB wwan adopter 9091)
(qualcomm hs USB qdloader 9008 (com8))
5 modes to get connected as USB in developers option under networking-
1 USB charging here are all DLL drivers for modem above described to use on PC.
2 media transfer
3 photo transfer
4 USB Ethernet
5 MIDI
You connect all drivers get installed. Adb drivers and fastboot tool were all properly installed but device never listens or detects itself in fastboot mode..OEM unlocked and USB debugging is enabled.....Kingroot5.0.5 apk not working nor the PC version is a success.
Kingoroot have failed.
Frama and towel etc do not parse on marshmallow.
It was for lte support 4g late....
Let me know, if there is anyone who succeeded to root this device....
Thanks for reading.
Hey bro, I am using the same device, and going to root it very soon. Will notify you as I do it..
Sent from my Micromax Q4001 using XDA Free mobile app
rk_destinyplays said:
Hey bro, I am using the same device, and going to root it very soon. Will notify you as I do it..
Click to expand...
Click to collapse
Hi,
I have same. Can you tell me how?

Categories

Resources