Hi everyone,
I have read up a lot on different people in similar situations to myself, but none of the solutions I have found have been successful. Anyway, here goes:
01) I rooted my GT-N7100 (Samsung Galaxy Note II) using Odin and then installed Cyanogenmod onto it.
02) I decided that I did not like CM, so I downloaded the stock rom for the handset and went through the process of putting the phone back to normal
03) This was successful, however, during the process my IMEI number has changed on the OS level, so that now the IMEI written on the device is different to the one that is displayed in the device status.
I am not trying to change my IMEI number to anything other than the number that it is supposed to be, I just want to be able to make calls and use my mobile data again. If anyone has any ideas about how I can go about editing the current IMEI number, I would be really appreciate it. I'm aware that this is a taboo subject due to the legality of changing the number, but all I want to do is get my phone back to the way it was.
Please feel free to ask me for any further information.
Thanks in advance.
Hi.
I have a Xiaomi Mi2S that doesn't connect to any cell networks.
I'm using CyanogenMod 11 nightlies, and after an update the phone lost its IMEI number. I had taken a backup of the NVRAM using EFS Professional, but when I looked for it the files where 0 bytes in length (probably a hard disk problem on my computer)
After trying a lot of stuff (installing stock MIUI, putting the phone in diag mode and installing a bunch of drivers), I managed to restore the IMEI number, but the phone still can't connect to the network.
I have tried a SIM from another company and it doesn't work. And my SIM works correctly in other phones, so I think that is not a SIM problem.
I don't know what to do... I tried flashing different ROMS, tried flashing a new baseband radio, but I can't get it to work! Is the phone lost???
Can anyone help me? I would appreciate it very much!!!!
Hi, I can't find anything relevant on XDA for your device and issue.
You can try asking for help from this thread dedicated to your device ,
http://forum.xda-developers.com/showthread.php?t=2274565&page=2
Or if that doesn't help , then from here,
http://forum.xda-developers.com/mi-2/help
Good luck!
Thanks!
Thank you for your help! I have posted in the thread you provided... let's hope that I can find a solution for this. I don't want the Android version of an iPod
Hi,
To revive my dead phone, I cloned another one of the same model. I tried for a week all tools and tricks on planet earth but nothing works to get my IMEI back because I don't have a backup of the original IMEI. I'm just asking if I can use my phone on the same phone operator as the owner of the original IMEI. I'm afraid they block this IMEI for both of us if they find that two phones are using the same IMEI at the same time.
If someone is in this same situation please help me.
Thanks.
Hi guys!
Yesterday my firmware update went terribly wrong and now I have a device that states that imei and baseband are unknown, so I my both sim-cards don't work.
I've tried several types of IMEI restoration, but none of them worked.
Unfortunately I don't have any backup for nvram. So, my guess is that there is a problem with EFS partition on the phone.
In QPST NV RF Manager I see my real IMEI from the box, so I guess it is still present, but my baseband doesn't work. Can you please suggest any help on recovering the baseband? Or if it is possible share with me modem backup or nvram backup without IMEI (I've seen on this forum that one guy with Samsung S3 had a kind of the same problem and he was given a working nvram backup without IMEI (IMEI was 0/00)) I can write my IMEI then, if baseband works again. Will appreciate any help.
Send it back. Only the oem is legally able to mess with the IMEI.
zelendel said:
Send it back. Only the oem is legally able to mess with the IMEI.
Click to expand...
Click to collapse
Well... I have managed to make it work again and my original IMEI is back. The only thing I had to do is to restore a working NVRAM backup (from another device) via QPST. So, it wasn't that hard. Much simpler than sending it back to China.
landslider said:
Well... I have managed to make it work again and my original IMEI is back. The only thing I had to do is to restore a working NVRAM backup (from another device) via QPST. So, it wasn't that hard. Much simpler than sending it back to China.
Click to expand...
Click to collapse
If you restored the file from another device then it won't have the right IMEI.
zelendel said:
If you restored the file from another device then it won't have the right IMEI.
Click to expand...
Click to collapse
It HAS right IMEI, I checked it with the original box. No need to put up an argument about it. Both devices (mine and the one which was backupped and restored from) are working fine, bot have ORIGINAL IMEI numbers and no errors considering networks or MI accounts. So, actually I have no idea what you are trying to tell me.
landslider said:
It HAS right IMEI, I checked it with the original box. No need to put up an argument about it. Both devices (mine and the one which was backupped and restored from) are working fine, bot have ORIGINAL IMEI numbers and no errors considering networks or MI accounts. So, actually I have no idea what you are trying to tell me.
Click to expand...
Click to collapse
I'm not making an argument. I'm trying to figure out how a number which is supposed to be hard coded into the file is then restored by restoring the files from a different device.
As these devices are not sold in the states learning as much as possible is a good thing.
Glad you got it working.
zelendel said:
I'm not making an argument. I'm trying to figure out how a number which is supposed to be hard coded into the file is then restored by restoring the files from a different device.
As these devices are not sold in the states learning as much as possible is a good thing.
Glad you got it working.
Click to expand...
Click to collapse
Okay, sorry. I will try to make it a bit clearer=) This device is not sold in Russia either (officially at least), so the only way to get it is to buy from aliexpress or ebay or anything else. In that case the buyer doesn't get any guarantee or official support. So if the device is broken and can't be restored it turns into a garbage. I believe that in the US the situation with that kind of devices is almost the same.
Now, if You are not familiar with QPST it is a software package for qualcomm based devices which can make backup/restore of some non-firmware software from the device (like IMEI, ESN, Baseband, LTE Channels etc). As for IMEI number, basically, as You've said it is hard coded into device so it is pretty hard to get it changed or fully deleted. Here we come to my case of unknown Baseband and IMEI. Though via phone settings I could see: "Unknown", my IMEI didn't change and was stored in the device. The "error" or smth like that happened after the factory reset and my guess is that the file structure of NVRAM was changed. So, backup of NVRAM taken from the working device didn't actually have IMEI or ESN in it, but it has the right file structure without any errors. That is what happened, the file structure was restored without changing any factory numbers.
If you have any questions, feel free to ask
landslider said:
Okay, sorry. I will try to make it a bit clearer=) This device is not sold in Russia either (officially at least), so the only way to get it is to buy from aliexpress or ebay or anything else. In that case the buyer doesn't get any guarantee or official support. So if the device is broken and can't be restored it turns into a garbage. I believe that in the US the situation with that kind of devices is almost the same.
Now, if You are not familiar with QPST it is a software package for qualcomm based devices which can make backup/restore of some non-firmware software from the device (like IMEI, ESN, Baseband, LTE Channels etc). As for IMEI number, basically, as You've said it is hard coded into device so it is pretty hard to get it changed or fully deleted. Here we come to my case of unknown Baseband and IMEI. Though via phone settings I could see: "Unknown", my IMEI didn't change and was stored in the device. The "error" or smth like that happened after the factory reset and my guess is that the file structure of NVRAM was changed. So, backup of NVRAM taken from the working device didn't actually have IMEI or ESN in it, but it has the right file structure without any errors. That is what happened, the file structure was restored without changing any factory numbers.
If you have any questions, feel free to ask
Click to expand...
Click to collapse
It is almost the same with a few exceptions. One being that their devices are banned from all people that work for the government, sometimes they get stopped at customs due to copyright issues and with the latest news about them coming loaded with malware, most won't buy them.
That makes sense in a way. Not sure why a factory reset would mess up that part of the device as it shouldn't touch it.
Thanks for the info.
zelendel said:
Not sure why a factory reset would mess up that part of the device as it shouldn't touch it.
Click to expand...
Click to collapse
I don't know either, but it was an unforgettable experience and a lesson to do backups of everything.
Hi @landslider, what's up friend? I have the same problem but I have no backup hidden partitions. Could you help me fix my device?
harolete said:
Hi @landslider, what's up friend? I have the same problem but I have no backup hidden partitions. Could you help me fix my device?
Click to expand...
Click to collapse
Hi! Have you tried flashing China developer rom with Miflash?
Second option: Connect to your PC and run QPST according to one of the manuals (in order for your phone to show up as a COM), run RF NV Manager and look up your line 550 NV_IMEI if it is filled with numbers that are the same as on your box (check HEX above them and numbers should resemble yours from box but written in opposite direction, eg: on the box it is XXXX69XXXXX in the QPST it will be 96). So, if your IMEI is at its place than all you need is a working device from someone to make a backup. Backup must be made in newer versions of QPST in *.xqcn format and than restored to your phone with checked box "allow ESN mismatch"
landslider said:
Well... I have managed to make it work again and my original IMEI is back. The only thing I had to do is to restore a working NVRAM backup (from another device) via QPST. So, it wasn't that hard. Much simpler than sending it back to China.
Click to expand...
Click to collapse
Could you teach me how to do that? how can i make nvram backup via other mi4c? and how can i put it into my mi4c ?? as i am not good at computer so i need your detailed explanation. I would be very glad if you help me.....
landslider said:
Okay, sorry. I will try to make it a bit clearer=) This device is not sold in Russia either (officially at least), so the only way to get it is to buy from aliexpress or ebay or anything else. In that case the buyer doesn't get any guarantee or official support. So if the device is broken and can't be restored it turns into a garbage. I believe that in the US the situation with that kind of devices is almost the same.
Now, if You are not familiar with QPST it is a software package for qualcomm based devices which can make backup/restore of some non-firmware software from the device (like IMEI, ESN, Baseband, LTE Channels etc). As for IMEI number, basically, as You've said it is hard coded into device so it is pretty hard to get it changed or fully deleted. Here we come to my case of unknown Baseband and IMEI. Though via phone settings I could see: "Unknown", my IMEI didn't change and was stored in the device. The "error" or smth like that happened after the factory reset and my guess is that the file structure of NVRAM was changed. So, backup of NVRAM taken from the working device didn't actually have IMEI or ESN in it, but it has the right file structure without any errors. That is what happened, the file structure was restored without changing any factory numbers.
If you have any questions, feel free to ask
Click to expand...
Click to collapse
so can you please upload that xqcn file from the working device ? i have the same issue and i can't find a working mi4c inn my area !
spybit2008 said:
so can you please upload that xqcn file from the working device ? i have the same issue and i can't find a working mi4c inn my area !
Click to expand...
Click to collapse
Hi! Unfortunately no, I can't. I don't have xiaomi mi4c anymore
spybit2008 said:
so can you please upload that xqcn file from the working device ? i have the same issue and i can't find a working mi4c inn my area !
Click to expand...
Click to collapse
http:/ en.miui.com thread-315233-1-1.html (replace whitespaces with slash)
There is a thread in official forum where one guy shares qcn backup. There is also an instruction to restore IMEI and baseband. But It doesn't help for me. Network still unavailable.
Hello there, I got a Pixel 3 from one of my friends recently, after some days i reset the phone and suddenly SIM stopped working, when i checked the IMEI no. of my phone it was "004001520220002" this. But my original IMEI before reset was 99001200********. Now i had no idea what just happened with the IMEI. that new IMEI is blacklisted & hence i cant use the network on this, so i tried to recover my IMEI by using root method. After messing around with my device for a couple of days, i was successfully able to root the device and install Xposed Framework in order to change the IMEI no. I have changed my IMEI no back to its original but network is still no where to be seen in my phone. *#06# will tell me the old good IMEI but i am still unable to get signals on my phone. What should i do now ????? I am not an expert with the ROMs or modifying the OS. PLZZ HELP ME GETTING MY PHONE SIGNALS BAKC PLZZZZZ
How did you able to recover your imei, i'm going through the same thing, please share your procedure bro.