Hello
I have gotten a Samsung Galaxy J7 2016 (SM-J710FN) from Germany market, then I rooted it successfully using (SM-J710F-NODMV.tar ) , but I was unable to access play store, so I tried to clear the cash but accidentally I wiped everything !
I tried to flash it:
I searched for the Firmware on Sammobile and I only found 2 region versions of it ( France + India), so I downloaded France version and used Odin 3 but I get this error:
Fail ODIN ERROR: cm.bin fail ( FLASH WRITE FAILURE)
Device: System rev. check fail device: 1 binary 0
I tried also to use smart switch (and Kies3) for Emergency Recovery but it gives:
Device is unsupported !
Is this related to Firmware incompatibility ?
please help to get my mobile phone up.
Any help please.
Reem1 said:
Any help please.
Click to expand...
Click to collapse
Have you gone to samsung-updates .com and searched there using your model number and region?
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Have you gone to samsung-updates .com and searched there using your model number and region?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply..
Yes I searched there, only Indian version is available.
Related
Hi I 'm trying to root S6 G920I Fail I want to install the original room and I sam mobile FAIL indicates the mobile the message
I downloaded the original but does not work
"sw rev. check fail device 3 binary 1"
Room These are the ones that have tried unsuccessfully to load all say fail
G920IDVU1BOE3_G920INZC1BOE3_G920IDVU1BOE3_HOME.tar
G920IDVU2COF8_G920IUUB2COF9_G920IDVU2COF8_HOME.tar
G920IDVU2COGA_G920IUUB2COGA_G920IDVU2COGA_HOME.tar
G920IDVU2DOI2_G920IUUB2DOH1_G920IDVU2DOI2_HOME.tar
Please if anyone can help me how to fix it
Forum Rules ,
Use ENGLISH only on XDA ...
2nd :: its seemed u used old fw so try to download latest fw for 920i from sammobile then flash it via odin pc ok ..
Sent from my SM-G920F using Tapatalk
Hi,
My tablet (Samsung GT-N8000) is stuck in a boot loop and I am not able to get any information such as PDA and CSC of my device. Is there a way to get this information from the serial number or the IMEI number?
I bought my device in Italy however none of the available firmware on SAMMOBILE for Italy works with my device. So I think I should look somewhere else but since I do not have both PDA and CSC information it will be difficult to just download and try.
Thanks for the help.
Any firmware for EU countries should work .
What do you actually mean by does not work ??
JJEgan said:
Any firmware for EU countries should work .
What do you actually mean by does not work ??
Click to expand...
Click to collapse
What I mean by it does not work is that I get stuck in "Nand write operation" using odin v3.09 while flashing a firmware from Europe and after a while I get fail message.
Goggle < "Nand write operation failed >
Nand is the internal memory that may have failed .
Hello I have galaxy s7 G930F EE UK, I m in pakistan using Pakistan network sim, so can I install Pakistan official firmware on it ?
kof200440 said:
Hello I have galaxy s7 G930F EE UK, I m in pakistan using Pakistan network sim, so can I install Pakistan official firmware on it ?
Click to expand...
Click to collapse
Hi
Yes you can, no problem
http://www.sammobile.com/firmwares/database/SM-G930F/PAK/
MAX 404 said:
Hi
Yes you can, no problem
http://www.sammobile.com/firmwares/database/SM-G930F/PAK/
Click to expand...
Click to collapse
MAX 404 - Do you have the UK EE firmware - I need to install it without impacting the data on the phone ? I tried to root the device via ODIN and have ended up with a ROM issue.
jo99_99 said:
MAX 404 - Do you have the UK EE firmware - I need to install it without impacting the data on the phone ? I tried to root the device via ODIN and have ended up with a ROM issue.
Click to expand...
Click to collapse
You don't need to hustle for the firmware. Simply download the firmware you need (EE is the Samsung CSC "EVR"). Search Google for the tool "Sanfirm" (note the spelling), and use it to download EVR. You will need Odin to install it (I suggest Odin3-v3.14.4).
jo99_99 said:
MAX 404 - Do you have the UK EE firmware - I need to install it without impacting the data on the phone ? I tried to root the device via ODIN and have ended up with a ROM issue.
Click to expand...
Click to collapse
hi mate
Is been a while since i had an S7 , it should be fine , only possible problem would be like a carrier specific service related to your country CSC and the firmware CSC but the risk is minimal
You can flash any rom for the G930F and preserve your data , just use HOME-CSC instead of the CSC file , if you use CSC file it will reset your phone
Thanks nice one
Droiderat said:
You don't need to hustle for the firmware. Simply download the firmware you need (EE is the Samsung CSC "EVR"). Search Google for the tool "Sanfirm" (note the spelling), and use it to download EVR. You will need Odin to install it (I suggest Odin3-v3.14.4).
Click to expand...
Click to collapse
Thanks Driodrat
I have pulled the EVR version from sammobile - latest EVR and ODIN.
I flashed it but it has failed multiple times.
I am getting the Verification failed error on loading.
Any advice?
jo99_99 said:
Thanks Driodrat
I have pulled the EVR version from sammobile - latest EVR and ODIN.
I flashed it but it has failed multiple times.
I am getting the Verification failed error on loading.
Any advice?
Click to expand...
Click to collapse
Sanfirm (my suggestion) downloads the firmware from Samsung servers directly. Sammobile is a 3rd-party service. While it is unlikely that your Sammobile firmware download is corrupt, it could be.
Do a Google (or whatever) search on "odin verification failed error". There are plenty of results to help you work through the issue. It is not an issue that I have faced personally.
Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?
Try to flash G920FXXU5DQA7 (CSC code:BTU)
chemeleon said:
Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?
Click to expand...
Click to collapse
You could possibly use smartswitch if you have the serial number of the phone which would download the default firmware that the phone came with if odin fails again
Yes i agree, smartswitch could be your best option.
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
Yeah looks like this is a bootloader issue, it won't let you install a firmware which contains an older bootloader, only thing I can is to download the latest non branded UK firmware and see if that flashes.
I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release
chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
LollosoSi said:
I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release
Click to expand...
Click to collapse
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)
forumber2 said:
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
You could try using samfirm which a windows application which downloads samsung firmwares
LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
As @sofir786 said, you can use SamFirm;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open it, set the settings like this;
sofir786 said:
You could try using samfirm which a windows application which downloads samsung firmwares
Click to expand...
Click to collapse
Wow I didn't know, it works thanks
forumber2 said:
As I said before; Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
I'll try flashing when the download finishes
Edit:
WORKING!
I used last(I think) ITV
File names:
AP: AP_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CSC: CSC_ITV_G920FITV5DQA2_CL10387678_QB12242913_REV02_user_low_ship.tar
BL: BL_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CP: CP_G920FXXU5DPL3_CL8821257_QB11771442_REV02_user_low_ship.tar
Samsung updated their bootloaders to 4XX in September/October so you cant flash back an older one or downgrade,so the only solution you have is to flash the new one which is 5XX released this year.
Flashed the latest UK revision (not the O2 branded one) and it worked
chemeleon said:
Flashed the latest UK revision (not the O2 branded one) and it worked
Click to expand...
Click to collapse
Told you
hello
my s7 flat showed a problem and didnt start
i tried to reset not solwed
i tried to install stock rom g930f german or turkey
odin fail allways or stuck not doing anything
i installed twrp
i wiped and formatted
and installed some different custom roms
so it is in booting
i want to install stock rom
is there a problem in rom version?
there are many s7 roms
how can i know which version i need to install?
there is g930f and g935
so what will i do?
PLEASE HELP
osmanoca said:
hello
my s7 flat showed a problem and didnt start
i tried to reset not solwed
i tried to install stock rom g930f german or turkey
odin fail allways or stuck not doing anything
i installed twrp
i wiped and formatted
and installed some different custom roms
so it is in booting
i want to install stock rom
is there a problem in rom version?
there are many s7 roms
how can i know which version i need to install?
there is g930f and g935
so what will i do?
PLEASE HELP
Click to expand...
Click to collapse
What is your model number?
What country/region are you using the device in? What carrier network is the device being used on?
You can't use g930f and g935, you can only use one of them and it has to be the same as the model number of your device, you can't use firmware from a different model number.
You need to find the newest firmware for your specific model number for your specific country/region/carrier.
Sent from my SM-S767VL using Tapatalk
details
Droidriven said:
What is your model number?
What country/region are you using the device in? What carrier network is the device being used on?
You can't use g930f and g935, you can only use one of them and it has to be the same as the model number of your device, you can't use firmware from a different model number.
You need to find the newest firmware for your specific model number for your specific country/region/carrier.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
ok i go to sammobiles firmwares
and i searched for galaxy s7 and turkey
i found many versions
one of them is this
https://sfirmware.com/downloads-file/142428/SM-G930F_1_20200316165830_5yqv647xim_fac
------------
FILE SIZE 2.47 GiB
MODEL Samsung SM-G930F
OPERATING SYSTEM Android Oreo 8.0.0
PDA/AP VERSION G930FXXS8ETCA
CSC VERSION G930FOJV8ETCA
MODEM/CP VERSION G930FXXS8ETCA
REGION TUR
COUNTRY Turkey
DESCRIPTION Turkcell, Vodafone, AVEA
HASH 80c64433c63e61ff6557f9c5d11cd54a
Read more at: https://sfirmware.com/downloads-file/142428/SM-G930F_1_20200316165830_5yqv647xim_fac
-------------
but all of them are fail in odin.
i select 4 files and click starts
it shows fail after 3 seconds as
Nand writes start
Single download
shoot.bin
__>
fail