i have sm-n9005 when i dail *#06# imei null and i tried to solve this prolem by flash maliti files on odin but its same prob and csc changed - ap also now my phone do alot of things wrong no signal baseband null imie null my phone name AP: N9005XXUEND3
CSC: N9005OJVEND2
PDA: N9005XXUEND3 i need mliti rom for my n9005
Related
I tried to update to XXLE2 from XXLD2 and was successful. I have a major problem though!!! Before i did it, when i entered *#1234# in the dialer i got PDA: I9070PXXLD2, PHONE: XXLD2, CSC: I9070PXXLD2 (or some **** like that). Now i got PDA: I9070XXLE2, PHONE: blank, CSC: I9070OXXLD4. i don't remember the exact PHONE and CSC codes prior to updating. Now i have no service!!!! i am trying to return my phone back on. in the system info i got Build number GINGERBREAD.XXLE2 (before, XXLD2). my model numer now displays, GT-I9070 (before, GT-I9070P). also my baseband version is unknown (before, I9070PXXLD2). someone help my entry level knowledge sorry ass. i am a trial and error type of person and this time it bit me in the ass!
Hi Guys, new to this so please indulge me a little!
Purchased two GT-P5100 Samsung Galaxy Tab 2s for the kids, checked the software version using *#1234# and received this:
AP: P5100UBALD4
CP: P5100UBLD4
CSC: P5100UUBALD4
Connect them to kies and it displays: latest firmware version: PDA:LD4 / PHONE:LD4 / CSC:LD4 (TTT)
Checked these at SamMobile:
GT-P5100 - Trinidad and Tobago
PDA: P5100UBALD4
CSC: P5100UUBALD4
Version: 4.0.3
Modified: 2012-04-17
Checked in firmware and files for Australian version (XSA) and found that here sammobile. com/firmware/?page=3&model=GT-P5100&pcode=XSA&os=1&type=3#firmware
Downloaded the firmware and flash programs files. Flash programs contained odin3 V1.87 and signed_espresso_20120220_16G.pit Firmware file contained: P5100XWALE3_P5100XSAALE1_P5100XXLD7_HOME.tar.md5
Put the tab into download mode after shutting down using power+volume right then volume left to enter odin mode.
Connected the tab with the usb cable, attached the pit file using PIT button then attached the md5 file using the PDA button. Re-partition deselected, auto-reboot & f.reset time were both selected, flash lock not selected. Pressed the start button. Process completed and the tab rebooted as normal.
Tried using *#1234# and received this:
AP: P5100XWALE3
CP: P5100XXLD7
CSC: P5100XSAALE1
When I connected to Kies I now see this:
"Your devices current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LE3 / PHONE:LD7 / CSC:LE1 (TTT)
I assumed rightly or wrongly that the country designator should have changed to XSA. Does anyone have any idea if I have missed something in the process?
I checked Setting > About Device:
Model Number:
GT-P5100
Android version:
4.0.3
Baseband version:
P5100XXLD7
Kernel version:
3.0.8-546364-user
[email protected]#1
Build Number:
IML74K.P5100XWALE3
Within status, device status is normal
Appreciate any advice you can offer.
Cheers Paul
Solved
PaulCsyd said:
Hi Guys, new to this so please indulge me a little!
Purchased two GT-P5100 Samsung Galaxy Tab 2s for the kids, checked the software version using *#1234# and received this:
AP: P5100UBALD4
CP: P5100UBLD4
CSC: P5100UUBALD4
Connect them to kies and it displays: latest firmware version: PDA:LD4 / PHONE:LD4 / CSC:LD4 (TTT)
Checked these at SamMobile:
GT-P5100 - Trinidad and Tobago
PDA: P5100UBALD4
CSC: P5100UUBALD4
Version: 4.0.3
Modified: 2012-04-17
Checked in firmware and files for Australian version (XSA) and found that here sammobile. com/firmware/?page=3&model=GT-P5100&pcode=XSA&os=1&type=3#firmware
Downloaded the firmware and flash programs files. Flash programs contained odin3 V1.87 and signed_espresso_20120220_16G.pit Firmware file contained: P5100XWALE3_P5100XSAALE1_P5100XXLD7_HOME.tar.md5
Put the tab into download mode after shutting down using power+volume right then volume left to enter odin mode.
Connected the tab with the usb cable, attached the pit file using PIT button then attached the md5 file using the PDA button. Re-partition deselected, auto-reboot & f.reset time were both selected, flash lock not selected. Pressed the start button. Process completed and the tab rebooted as normal.
Tried using *#1234# and received this:
AP: P5100XWALE3
CP: P5100XXLD7
CSC: P5100XSAALE1
When I connected to Kies I now see this:
"Your devices current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LE3 / PHONE:LD7 / CSC:LE1 (TTT)
I assumed rightly or wrongly that the country designator should have changed to XSA. Does anyone have any idea if I have missed something in the process?
I checked Setting > About Device:
Model Number:
GT-P5100
Android version:
4.0.3
Baseband version:
P5100XXLD7
Kernel version:
3.0.8-546364-user
[email protected]#1
Build Number:
IML74K.P5100XWALE3
Within status, device status is normal
Appreciate any advice you can offer.
Cheers Paul
Click to expand...
Click to collapse
Managed to solve the problem by performing a factory reset. Devices now display XSA in Kies
Hi all,
Yesterday my phone was working perfectly but this morning there wasnt any service signal.
I cant call,send messages,,,,it cant read sim-card.
I tried flash stock rom with odin v3.9 , wiping data/caches files. This solved my problem only for 2 hours. After 2-3 hours Imei lost again.
When i dial *#0011*# there is only blank screen.
Is there any solution for Null Imei No ? (I have original Imei no btw)
Should i Root my phone?(No experience with rooting).
What sould i do .
4.4.2
ap: I9505XXUGNK4
csc: I95050XAGNK4
Thank you.
Hi there,
You have some nice tool for restore your device here:
[TOOL][I9505-I9505G/I9515] AntaresOne's IMEI backup/restore tool
And some discussions about that here: [Q] I9505 Imei null/null - Baseband version Unknow
Good luck
guys my question is baseband code is same as PDA code or is it same as CSC code??? when flashing a stock firmware
for example if this is the situation
PDA : I9500XXUHOG1 CSC :I9500OJVHOG3. what will be the baseband??
Hello,
I have a problem with my Samsung G930F Baseband version and Imei both is Unknown, no signal with im that means crossed circle in the phone i can't call.
In Software Information Baseband version is unknown, Imei too, Who can help me or give soft by odin repairing it.
I reinstalled soft several times. I think need Root to repair or some special program or AP Fix Baseband for G930F, someone had such a problem. How to solve it step by step or files ?
Android version 8.0
Build Numer: G930FXXS4ESC1
Who can Help and give me info where i can fix it ?
Try this https://forum.xda-developers.com/galaxy-s7/how-to/guide-how-to-fix-check-drk-imei-issues-t3379511
Worked for me before