Database Info

Help greatly appreciated - S6 G920F Bootloop after odin flash

Hello folks. Today I did a cache, system, data wipe in TWRP on my G920F. After that I tried to restore a nandroid backup, but it failed and when I tried to restart it said there was no OS installed. So the phone wouldn't boot. I figured I did something wrong so I downloaded a 5.1.1 stock rom (UK) and flashed it with odin. But after the flash the phone would just bootloop. How can I revive the phone? Tried flashing the firmware again using another version of odin and also, I did a factory reset from the stock recovery, but no dice. Any ideas? Thanks in advance

Hey there,
check this thread here, should help (use TWRP to flash a ROM instead of Odin, links in thread).
Good luck!

Managed to make it work flashing another official rom, then factory reset. Lost all my files though...
Can be closed. Thanks!
Sent from my SM-G925F using Tapatalk

kendall1004 said:
Hey there,
check this thread here, should help (use TWRP to flash a ROM instead of Odin, links in thread).
Good luck!
Click to expand...
Click to collapse
How can i make TWRP flash a rom when Galaxy S6 doesn't have SD card to put the rom in the phone?

Immoblize said:
How can i make TWRP flash a rom when Galaxy S6 doesn't have SD card to put the rom in the phone?
Click to expand...
Click to collapse
Connect the phone to your PC and copy the ROM file to its root folder (just open "phone" and drop it there).
Using TWRP's "install" menu, you can browse your files and point it to this one; usually you're already in the right directory.

kendall1004 said:
Connect the phone to your PC and copy the ROM file to its root folder (just open "phone" and drop it there).
Using TWRP's "install" menu, you can browse your files and point it to this one; usually you're already in the right directory.
Click to expand...
Click to collapse
I wish that was so easy. I am on bootloop on my second day and i can fix it. I am getting crazy here. Nothing work - Kies, Smart Switch or Odin.

Immoblize said:
I wish that was so easy. I am on bootloop on my second day and i can fix it. I am getting crazy here. Nothing work - Kies, Smart Switch or Odin.
Click to expand...
Click to collapse
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:

kendall1004 said:
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
Click to expand...
Click to collapse
THANKS A LOT for the info. I have today worked for about 8-9 hours to fix it. I will try read tomorrow on the site you put there and also read about how to put files to TWRP - since i don't have a SD card on my S6.

Immoblize said:
THANKS A LOT for the info. I have today worked for about 8-9 hours to fix it. I will try read tomorrow on the site you put there and also read about how to put files to TWRP - since i don't have a SD card on my S6.
Click to expand...
Click to collapse
Sleep over it, tomorrow is another day
Also, browse my recent postings here; most of them revolving around your issue, this will surely help.

kendall1004 said:
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
Click to expand...
Click to collapse
Okay, i have done almost all of what you said.
But what im thinking about is the thread your refering to is to a S6 Edge and not for SM-G920F model.
But so far so good.
What kernel to you want me to flash? How can i root via Odin when i don't have USB-debugging on - But i can according to the thread, install SuperSU via TWRP.
I didn't know what kernel i had on, but i managed to install TWRP, install SuperSU via TWRP, pushing my stock rom to TWRP. But when installing the stock rom, it says "no md5 file found" or something like that. What am i doing wrong?

Immoblize said:
Okay, i have done almost all of what you said.
But what im thinking about is the thread your refering to is to a S6 Edge and not for SM-G920F model.
But so far so good.
What kernel to you want me to flash? How can i root via Odin when i don't have USB-debugging on - But i can according to the thread, install SuperSU via TWRP.
I didn't know what kernel i had on, but i managed to install TWRP, install SuperSU via TWRP, pushing my stock rom to TWRP. But when installing the stock rom, it says "no md5 file found" or something like that. What am i doing wrong?
Click to expand...
Click to collapse
Should work on both Edge and normal.
I have the G920F and did it this way, i also had problems, by the way:
http://forum.xda-developers.com/showpost.php?p=62550973&postcount=29
I recommend chosing an XtreStoLite ROM, the odexed version is an "improved stock" one, comes with a modified UniKernel and runs much smoother than stock.
Anyway, in TWRP, there is an option to skip md5 checking for backup files and for skipping the zipfile-check; not sure if you can also disable md5sum-checks.
Maybe you should try downloading the ROM from here or sammobile.de, verify the md5-sum yourself to make sure it is fine, and flash that one.
If TWRP doesn't think the ROM file is ok, it probably isn't ...
here's the odexed version of XtreStoLite:
http://forum.xda-developers.com/galaxy-s6/development/rom-xtrestolite-pure-edition-1-0-beta-1-t3082467

kendall1004 said:
Should work on both Edge and normal.
I have the G920F and did it this way, i also had problems, by the way:
http://forum.xda-developers.com/showpost.php?p=62550973&postcount=29
I recommend chosing an XtreStoLite ROM, the odexed version is an "improved stock" one, comes with a modified UniKernel and runs much smoother than stock.
Anyway, in TWRP, there is an option to skip md5 checking for backup files and for skipping the zipfile-check; not sure if you can also disable md5sum-checks.
Maybe you should try downloading the ROM from here or sammobile.de, verify the md5-sum yourself to make sure it is fine, and flash that one.
If TWRP doesn't think the ROM file is ok, it probably isn't ...
here's the odexed version of XtreStoLite:
http://forum.xda-developers.com/galaxy-s6/development/rom-xtrestolite-pure-edition-1-0-beta-1-t3082467
Click to expand...
Click to collapse
Okay, i have flashed TWRP, installed the kernel and Super SU (http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866). But i can't flash the modem and bootloader for the XtreStoLite because it gives me Nand write error. I tried then to install XtreStoLite from TWRP which installed correctly but still doesn't fix the bootloop. I can read that i WILL get the bootloop if not using the correct modem and bootloader, but for some reason i am not able to flash them. Any help here? Or am i doing everything wrong here?

Immoblize said:
Okay, i have flashed TWRP, installed the kernel and Super SU (http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866). But i can't flash the modem and bootloader for the XtreStoLite because it gives me Nand write error. I tried then to install XtreStoLite from TWRP which installed correctly but still doesn't fix the bootloop. I can read that i WILL get the bootloop if not using the correct modem and bootloader, but for some reason i am not able to flash them. Any help here? Or am i doing everything wrong here?
Click to expand...
Click to collapse
Alright, you have root access and TWRP is running.
All you have to do is install the ROM file (unextracted, as a .zip) from your phone`s root folder; if your model is a G920F, the bootloader should be 5.1.1 and work, no need to change.
When exactly does Odin give you the error message, right after you click start or after a few secs of flashing?
I suspect the issue to be related to first reboot after flashing the recovery,.
When finished flashing TWRP, did you successfully boot into recovery menu be pressing vol up+home+power?
If you saw the bootloop screen then, you`ll have to do it again, i'm afraid:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. (...) Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
I know, it`s annoying; but give it another try:
use Odin 3.1.0.7 (run with admin rights), do a full wipe and install TWRP 2.8.7.
When doing so and Odin gives you the "finished/successfully flashed" message, immediately press & hold the key combo to get into recovery; don`t wait for the scrteen to change or unplug the phone, you need to be damn quick here.
If you have done it right, you are in TWRPs recovery menu.
From there, install the XtreStoLite ROM after doing a factory reset; reboot and you should be fine.
Aaaarrgh we will get this thing running, goddammit

kendall1004 said:
Alright, you have root access and TWRP is running.
All you have to do is install the ROM file (unextracted, as a .zip) from your phone`s root folder; if your model is a G920F, the bootloader should be 5.1.1 and work, no need to change.
When exactly does Odin give you the error message, right after you click start or after a few secs of flashing?
I suspect the issue to be related to first reboot after flashing the recovery,.
When finished flashing TWRP, did you successfully boot into recovery menu be pressing vol up+home+power?
If you saw the bootloop screen then, you`ll have to do it again, i'm afraid:
I know, it`s annoying; but give it another try:
use Odin 3.1.0.7 (run with admin rights), do a full wipe and install TWRP 2.8.7.
When doing so and Odin gives you the "finished/successfully flashed" message, immediately press & hold the key combo to get into recovery; don`t wait for the scrteen to change or unplug the phone, you need to be damn quick here.
If you have done it right, you are in TWRPs recovery menu.
From there, install the XtreStoLite ROM after doing a factory reset; reboot and you should be fine.
Aaaarrgh we will get this thing running, goddammit
Click to expand...
Click to collapse
What i did was install stock android via Odin.
Flashed TWRP
Flashed Alex V kernel first, then SUPER SU.
Flashed XtreStoLite and it still gives me bootloop.
What i can't manage to do is after flashing TWRP, then i am not fast enough to press Shutdown button, home button, and volume up button before the Samsung logo appears. I think that is the problem.

:silly:
Immoblize said:
What i did was install stock android via Odin.
Flashed TWRP
Flashed Alex V kernel first, then SUPER SU.
Flashed XtreStoLite and it still gives me bootloop.
What i can't manage to do is after flashing TWRP, then i am not fast enough to press Shutdown button, home button, and volume up button before the Samsung logo appears. I think that is the problem.
Click to expand...
Click to collapse
That IS the problem, i think :fingers-crossed:
Solved the same problem at reddit, take a look: reddit thread
Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it.
So now, take a deep breath, lean back and try again.
As soon as you have clicked to start the flashing procedure, press the 3 butons firmly, simultaneously and quick as lightning-
hold them down till it boots into TWRP.
Come on, even i have managed it after a few tries

kendall1004 said:
:silly:
That IS the problem, i think :fingers-crossed:
Solved the same problem at reddit, take a look: reddit thread
Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it.
So now, take a deep breath, lean back and try again.
As soon as you have clicked to start the flashing procedure, press the 3 butons firmly, simultaneously and quick as lightning-
hold them down till it boots into TWRP.
Come on, even i have managed it after a few tries
Click to expand...
Click to collapse
HMMM. I see.
It's not possible for me to boot into TWRP without the Samsung logo appears. I press the start, the same time i press the start, i press Power, Home and Volume Up button but still the logo appears. It takes 4 sec and it have flashed the TWRP. It's not possible...

Immoblize said:
HMMM. I see.
It's not possible for me to boot into TWRP without the Samsung logo appears. I press the start, the same time i press the start, i press Power, Home and Volume Up button but still the logo appears. It takes 4 sec and it have flashed the TWRP. It's not possible...
Click to expand...
Click to collapse
So, for some reason you can't enter recovery mode.
This could be
a) TWRP is not installed correctly (did you use the .img ot the .tar-file? Odin needs the .tar-format: link )
or
b) the kernel you flashed doesn't work with this-
here is the one i have used to root my S6.
I would try to reflash above Unikernel first, if you used the .img-file of TWRP rather than the .tar to flash TWRP,
do it again with the .tar file instead.
If this fails, the last thing would be to flash a unmodified stock ROM to restore the original setup including the bootloader...
i will look into this now a little bit deeper, there has to be a workaround.
Best of luck for now, we stay in touch
EDIT: the developer of XtreStoLite recommends another way with Chainfire's root:
Flash CF-Root for your model with Odin - Make sure you have an custom recovery installed (I advise you to use TWRP) (2.8.7.1 or newer REQUIRED for v.2.1 > of this ROM!!)
Click to expand...
Click to collapse
If the bootloader is your problem, you can update to the newest versions of bootloader and modem for your model following these instructions:
edgarf28`s instructions
I will do this right now, for a new version of XtreStoLite was just released today and i will upgrade.
Keep me informed

kendall1004 said:
So, for some reason you can't enter recovery mode.
This could be
a) TWRP is not installed correctly (did you use the .img ot the .tar-file? Odin needs the .tar-format: link )
or
b) the kernel you flashed doesn't work with this-
here is the one i have used to root my S6.
I would try to reflash above Unikernel first, if you used the .img-file of TWRP rather than the .tar to flash TWRP,
do it again with the .tar file instead.
If this fails, the last thing would be to flash a unmodified stock ROM to restore the original setup including the bootloader...
i will look into this now a little bit deeper, there has to be a workaround.
Best of luck for now, we stay in touch
EDIT: the developer of XtreStoLite recommends another way with Chainfire's root:
If the bootloader is your problem, you can update to the newest versions of bootloader and modem for your model following these instructions:
edgarf28`s instructions
I will do this right now, for a new version of XtreStoLite was just released today and i will upgrade.
Keep me informed
Click to expand...
Click to collapse
I can enter the recovery mode (TWRP) but not before the Samsung logo appears when i install TWRP. I have tried many times and i still can't enter TWRP before the samsung logo appears for 1-2 secs.
I am not able to flash Edgar28s bootloader and modem because it always gives me nand write error fail. I think it's because i'm not rooted with CFautoroot - and to get rooted with that way, i have to have USB debuggin on which i don't have.
What i think is, that i was very close but i still can't manage to enter TWRP (after installing) without the samsung logo appears for 1-2 secs. Because what you said before "Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it."
So what do you think now?
And btw thanks for all the help so far. I'm trying my best and following your steps but i always think i'm very close. I'm also so close to destroy my phone but i've read so many places that "it's only a softbrick, that can be fixed very easy".

Immoblize said:
I can enter the recovery mode (TWRP) but not before the Samsung logo appears when i install TWRP. I have tried many times and i still can't enter TWRP before the samsung logo appears for 1-2 secs.
I am not able to flash Edgar28s bootloader and modem because it always gives me nand write error fail. I think it's because i'm not rooted with CFautoroot - and to get rooted with that way, i have to have USB debuggin on which i don't have.
What i think is, that i was very close but i still can't manage to enter TWRP (after installing) without the samsung logo appears for 1-2 secs. Because what you said before "Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it."
So what do you think now?
And btw thanks for all the help so far. I'm trying my best and following your steps but i always think i'm very close. I'm also so close to destroy my phone but i've read so many places that "it's only a softbrick, that can be fixed very easy".
Click to expand...
Click to collapse
OK, so you can enter the TWRP menu and install a ROM, right?
Any stock ROM from sammobile.com includes firmware, kernel and bootloader, so flashing the right one of these should reset all this.
Give it a try, for i think TWRP is actually working- otherwise you wouldn't get to the screen.
If the phone runs again with stock firmware, you can then flash a custom ROM.
And yeah, we're close, this can be only a minor flaw...it's near impossible to brick your android phone, so they say.
Don't worry mate, and be assured you're not the only one:
i just got stuck on bootloop also for a few minutes after upgrading to the newest version of XtreStoLite, which came out today.
Using TWRP, i could just flash back the previous version and all's good again.
Cya tomorrow...
EDIT:
I read through your previous comments again; the "md5sum"- issue seems to be a problem with the ROM file itself (corrupted or wrong version).
I'd bet that flashing the correct stock firmware for your carrier and model will solve the problem.
So enter the exact model number (like G920FXXU3COI9 or such) you have, get the right ROM and flash it with Odin 3.10.7
I couldn't find a denmark carrier on sammobile, eventually you have to look here at XDA, there's a list of stock imges as well.
Read lots of threads around this issue, almost all solved the problem flashing a stock ROM again.
Fingers crossed :fingers-crossed:

OK, so you can enter the TWRP menu and install a ROM, right?
Any stock ROM from sammobile.com includes firmware, kernel and bootloader, so flashing the right one of these should reset all this.
Give it a try, for i think TWRP is actually working- otherwise you wouldn't get to the screen.
If the phone runs again with stock firmware, you can then flash a custom ROM.
And yeah, we're close, this can be only a minor flaw...it's near impossible to brick your android phone, so they say.
Don't worry mate, and be assured you're not the only one:
i just got stuck on bootloop also for a few minutes after upgrading to the newest version of XtreStoLite, which came out today.
Using TWRP, i could just flash back the previous version and all's good again.
Cya tomorrow...
EDIT:
I read through your previous comments again; the "md5sum"- issue seems to be a problem with the ROM file itself (corrupted or wrong version).
I'd bet that flashing the correct stock firmware for your carrier and model will solve the problem.
So enter the exact model number (like G920FXXU3COI9 or such) you have, get the right ROM and flash it with Odin 3.10.7
I couldn't find a denmark carrier on sammobile, eventually you have to look here at XDA, there's a list of stock imges as well.
Read lots of threads around this issue, almost all solved the problem flashing a stock ROM again.
Fingers crossed
Click to expand...
Click to collapse
Yeah, i've never had problems entering TWRP menu. I can flash stock firmware via Odin but i can never do it via TWRP because it's says no md5 file found error - tho i can flash XtreStoLite (i think it's because it says aroma installer).
I've read many places about the md5 file error, but for some reason, i can't figure out how to fix it.
No, there is no Denmark model, but we have NEE (Nordic). The only stock firmware i can install is XEF (i don't remember where i got that from actually).
I will try agian and flash stock android via TWRP AND read about the md5 file error now/later. Tomorrow i will call the store i got the phone from and tell them i have a hardware issue or something like that. The guy owns a store for sellings covers, cases and stuff like that. He got the phone from Samsung free and sold it brand new in the package with 1 year warranty, so i will contact him tomorrow if i can't figure out how to flash stock android via TWRP or if it gives me error about the md5 file.
Talk to you tomorrow.
Update: I can not flash NEE model via Odin. Only XEF model - i also found out it was French firmware.

[HELP] HTC on e8sd MM update install ERROR

hey guys, yesterdy I got a notification for android 6.0 upgrade and it was a ~100mb file for preparation so i downloaded it and charged my battery and tapped to install it, it reboots and wants to start installing but then goes to recovery menu and gives an error
the phone is all stock, no root or bl unlock or anything
I attached the error msg below:
it's m8sd not e8sd, mistyped in topic

Might be due to bad zip file! Download the update again and try!

Kianush said:
hey guys, yesterdy I got a notification for android 6.0 upgrade and it was a ~100mb file for preparation so i downloaded it and charged my battery and tapped to install it, it reboots and wants to start installing but then goes to recovery menu and gives an error
the phone is all stock, no root or bl unlock or anything
I attached the error msg below:
it's m8sd not e8sd, mistyped in topic
Click to expand...
Click to collapse
I had a similar error as yours doing exactly the same thing but mine was a e8sw running LP5 Sense6 rooted stock with xposed.
Even when I uninstalled xposed and disabled supersu, I still could not install the upgrade.
Finally managed to get the upgrade by going all the way back to stock and allow the OTA updates all the way up the MM6 update. Took me nearly 2 days to do that.
I have taken clean twrp backups of all the stock updates and will try and post them here soon.

generalugh28 said:
I had a similar error as yours doing exactly the same thing but mine was a e8sw running LP5 Sense6 rooted stock with xposed.
Even when I uninstalled xposed and disabled supersu, I still could not install the upgrade.
Finally managed to get the upgrade by going all the way back to stock and allow the OTA updates all the way up the MM6 update. Took me nearly 2 days to do that.
I have taken clean twrp backups of all the stock updates and will try and post them here soon.
Click to expand...
Click to collapse
thank you for the information, but as I mentioned in op my phone is already all stock, I havent ever moded or rooted or anything, it's stock locked bootloader

Have the exact same issue. My device is compelitely stock. Tried flashing the recovery from the downloaded OTA but still got the sama error. Hopefully someone will be able to resolve the issue.

if you have problems in installing OTA updates, follow these steps
1. check if your CID and MID are matching each other. they should be both for same region. mine are for vietnam. mec_dugl / HTC__057
2.Flash an stock RUU from http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
3.Skip all registeration process and directly go to update menu.
4.this is a 3 stage update process: a small update for some applications/another 100 MB update for making device ready for main update!! / at last 1 GB main update . each one should be downloaded and installed separately.
5. after downloading 100MB update, DO NOT restart. coneect your phone to PC and go to download folder on phone internal memory, there should be a zip file containing updates(sadly I forgot file name), copy it on your PC and extract recovery.img from it.
6. boot your phone into bootloader and flash stock recovery you've extracted using fastboot.
7. now you have complete stock ROM. go to setting/update again and follow update process.
8.after updating you may flash twrp and supersu.
9. I don't know why, but there is a good chance that after messing with system files in MM you get stuck in several kinds of bootloops and soft-breaks. Don't worry; all you should do is going to recovery and wiping caches. sometimes you need a factory reset too. also have in mind that a complete boot after changing system files may take up to 15 minutes even without wipes.

@sam5154 well thank you for the info, Im gonna try these steps except, I will try to download again and flash recovery and try it before flashing a RUU and lose everything
but I hope it works anyway, btw mine is also vietnam region.

sam5154 said:
if you have problems in installing OTA updates, follow these steps
1. check if your CID and MID are matching each other. they should be both for same region. mine are for vietnam. mec_dugl / HTC__057
2.Flash an stock RUU from http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
3.Skip all registeration process and directly go to update menu.
4.this is a 3 stage update process: a small update for some applications/another 100 MB update for making device ready for main update!! / at last 1 GB main update . each one should be downloaded and installed separately.
5. after downloading 100MB update, DO NOT restart. coneect your phone to PC and go to download folder on phone internal memory, there should be a zip file containing updates(sadly I forgot file name), copy it on your PC and extract recovery.img from it.
6. boot your phone into bootloader and flash stock recovery you've extracted using fastboot.
7. now you have complete stock ROM. go to setting/update again and follow update process.
8.after updating you may flash twrp and supersu.
9. I don't know why, but there is a good chance that after messing with system files in MM you get stuck in several kinds of bootloops and soft-breaks. Don't worry; all you should do is going to recovery and wiping caches. sometimes you need a factory reset too. also have in mind that a complete boot after changing system files may take up to 15 minutes even without wipes.
Click to expand...
Click to collapse
Hi, thanks for this. I will try this once i got home.
But i have one questions, mine is Vietnam MEC_DUGL with stock lollipop 5.0.2. The RUU only available for stock lollipop 5.0.1. Can I use this RUU or should I look for specific RUU for lollipop 5.02?
Thanks!

Kianush said:
@sam5154 well thank you for the info, Im gonna try these steps except, I will try to download again and flash recovery and try it before flashing a RUU and lose everything
but I hope it works anyway, btw mine is also vietnam region.
Click to expand...
Click to collapse
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.

sam5154 said:
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
Click to expand...
Click to collapse
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else

Kianush said:
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Click to expand...
Click to collapse
Have you tried the suggestion above? Let me know the result! Thanks man

sam5154 said:
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
Click to expand...
Click to collapse
and how to check for this mec_dugl / HTC__057?
the first part is ok it shows that in booloader menu, but how to check for HTC__057??

Kianush said:
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Click to expand...
Click to collapse
Kianush said:
and how to check for this mec_dugl / HTC__057?
the first part is ok it shows that in booloader menu, but how to check for HTC__057??
Click to expand...
Click to collapse
Here you go :
If you want more information, use ADB (if you don't how to get it going, use the search on the forum or Google about it).
While you phone is connected to your PC, type adb reboot bootloader and wait for your phone to reboot into bootloader mode. Once there, you can perform fastboot commands like getvar. Type fastboot getvar all and you will see all the information about the phone, including the product variable which lists the model you have.
Source : http://forums.androidcentral.com/htc-one-m7/320871-how-check-htc-one-variant-model.html

bataskhayal said:
Here you go :
If you want more information, use ADB (if you don't how to get it going, use the search on the forum or Google about it).
While you phone is connected to your PC, type adb reboot bootloader and wait for your phone to reboot into bootloader mode. Once there, you can perform fastboot commands like getvar. Type fastboot getvar all and you will see all the information about the phone, including the product variable which lists the model you have.
Source : http://forums.androidcentral.com/htc-one-m7/320871-how-check-htc-one-variant-model.html
Click to expand...
Click to collapse
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!

Kianush said:
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Click to expand...
Click to collapse
Yes bos, i also did the recovery trick but still cant make it work. So the only solution we havent try is to flash RUU which i doubt also will make it work since my phone also factory stock. So i guess will stay in 5.0.2 for a while.

Kianush said:
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Click to expand...
Click to collapse
Hi, I have managed to finally update my Vietnam HTC One E8 dual SIM (MEC_DUGL) to Android 6.0. The problem that cause the error is the error recovery file, hence I re-install the RUU to get the correct recovery.img file. Below are the steps :
Note : Try with your own risk
1. My device is currently stock 5.0.2 no root and locked. Before starting the update process please make sure to backup all of your important data. Im using the stock HTC backup software, when you restore your device after you finished your update process, it will re-install your currently installed apps , contacts, settings, etc.
2. Download RUU for your device here : http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
I downloaded :
[Vietnam][DUAL][M8sd][mec_dugl][CID HTC__059][OPAJ20000] :
[Lollipop 5.0.1][2.35.425.2] : LINK
Seems not match with my current software (5.0.2), but eventually it will do the magic.
3. Flash RUU. NOTE : You will lose all of your data in your internal phone memory. Make sure to backup all of your important files.
Steps:
1) Download RUU.
2) Rename RUU to 0PAJIMG.zip (the first character is a zero, NOT A LETTER O)
3) Put renamed 0PAJIMG.zip on your external_SD
4) Boot into your bootloader and make sure your in hboot and let it update its RUU.
5) No PC, no adb, no fastboot, no terminal is needed, just a root explorer to rename and transfer the renamed RUU file to external_sd
6) After you have updated your RUU, make sure to remove the 0PAJIMG.zip from your external_sd because it will ask to update your RUU everytime your reboot to your bootloader which it is technically supposed to do but its unnecessary after you have done it once (unless you are planning on flashing RUU again).
7) Done!
Source : http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
4. Reboot your phone, now your phone is back to factory stock, connect it to wifi, no need to set up any account, just go directly to software update from Settings > About > Software Updates. Just install all the available software updates (5.0.2 > 6.0 part 1 > 6.0 part 2).
5. BOOM! Your HTC One E8 now runs Android 6.0.1 Marshmallow.
6. Restore your phone from the stock HTC Backup Software.
7. Done

Unroot and relock bootloader to install ota updates ?

Dear members
I want to update my rooted E6633 running 32.2.A.0.376 to 32.4.A.0.160 through the OTA, of course, because my device is already rooted the downloaded update couldn't be installed, the reason behind seeking for this update that I'm not able to make phone call and the phone is not able to detect the SIM cards and showing pop up error message android.phone.com has stopped repeatedly whenever I press ok and phone app crashes.
what I have done so far is through superus app I chose full unroot and the phone rebooted successfully and I have checked it with the root checker showing that the root is not installed properly
I launched the flashtool and booted the device on flashmood and selected the bootloader relock option
flashtool said that bootloader finished relocking the device, but the device is not able to boot to the normal mood whenever I push the power on button the device only vibrate or boots to flashmood when the cable is connected but when unlocking the bootloader, the device boots normally.
How to update my device without losing my current data and to fix phone application and SIMs recognition?
Do I have to fastboot the original Sony kernel and where can I find it? because I didn't make any backup
I don't mind losing root I just want to make the OTA update installed without flashing my phone and starting from the beginning.
Thank you
Notes: when the device is rooted again and when opening luckyputcher the error messages disappear and SIMs cards work fine and phone app opens normally

I will assume the reason you are not going for this is because of limited bandwidth or something along those lines.
You can either wait for someone to post a stock kernel of it but if you have a the .376 ftf you can extract the kernel using this guide (at step 3 you can flash the kernel using adb/fastboot)

Dna10 said:
I will assume the reason you are not going for this is because of limited bandwidth or something along those lines.
You can either wait for someone to post a stock kernel of it but if you have a the .376 ftf you can extract the kernel using this guide (at step 3 you can flash the kernel using adb/fastboot)
Click to expand...
Click to collapse
Thanks for your reply, not limited bandwidth but slow connection that one of the reasons, if I could extract the kernel from the firmware and flashing it without losing the data and allowing ota to be installed this will be great. Hopefully this way fixes the system errors and keeping the data and settings as it is.
Thanks again I will start following these guidelines if something went wrong surely I will sue you :laugh:

Ok I downloaded the ftf file, extracted kernel.sin
opened flashtool
I coudn't found the Dump Data option but I clicked on extract data inisted
I renamed the extracted kernel from elf to boot.img
I flashed the kernel using this command
fastboot boot boot.img
I got this error message : FAILED (remote: dtb not found)
so I relocked the bootloader and I got diffrent message : FAILED (status read failed (Too many links))
I went to flashtool and flasehd the kernel with no errors but the mobile did'nt boot, it's stuck on sony logo
what is the problem !?

kingskull said:
Ok I downloaded the ftf file, extracted kernel.sin
opened flashtool
I coudn't found the Dump Data option but I clicked on extract data inisted
I renamed the extracted kernel from elf to boot.img
I flashed the kernel using this command
fastboot boot boot.img
I got this error message : FAILED (remote: dtb not found)
so I relocked the bootloader and I got diffrent message : FAILED (status read failed (Too many links))
I went to flashtool and flasehd the kernel with no errors but the mobile did'nt boot, it's stuck on sony logo
what is the problem !?
Click to expand...
Click to collapse
Ok First Things First you should have used the command :
fastboot flash boot boot.img
Secondly to remedy to the problem flash the ftf BUT don't select anything in the wipe section, keep them all unchecked. Then you will have a stock and unrooted ROM without having lost your data.
Edit: If you were able to download that big of a file why didn't you go directly with the .106 fw? You would have had the same initial result you wanted! ::facepalm::

Dna10 said:
Ok First Things First you should have used the command :
fastboot flash boot boot.img
Secondly to remedy to the problem flash the ftf BUT don't select anything in the wipe section, keep them all unchecked. Then you will have a stock and unrooted ROM without having lost your data.
Edit: If you were able to download that big of a file why didn't you go directly with the .106 fw? You would have had the same initial result you wanted! ::facepalm::
Click to expand...
Click to collapse
I was not sure about flashing the whole ftf, I was worried if I flashed the the new 160 would cause the system to break down, so I decided to unroot and to keep my self on the safe side by unrooting, relocking bootloader and installing the stock kernel so that I will be able to update to the .160 fw through OTA
I will follow your instruction about flashing the .367 fw. I was thinking about it but I wasn't sure which options that should I select without losing the data. Should I select the whole options except the wipe section?
Thanks for your help

Don't select anything! It should look like in the screenshot I uploaded

Dna10 said:
Don't select anything! It should look like in the screenshot I uploaded
Click to expand...
Click to collapse
Hmmm yesterday before posting my last reply I flashed the firmware I only selected the kernel and nothing happened, no changes happened to the firmware except the ota size was reduced from 485mb to 187mb !?
Oh dear according to the screenshot you uploaded the ftf I downloaded is for middle east and I'm from Saudi Arabia never thought there is custom firmware for Saudi Arabia do you think that the reasone behind this boot failure is because of the difference between the installed firmware and the downloaded one?

It shouldn't pose any problems at all. Any problem arising might be of your doing. What you could do is make a Titanium Backup of your user apps and go for clean install if your problems persist.

Dna10 said:
Don't select anything! It should look like in the screenshot I uploaded
Click to expand...
Click to collapse
Ok that's great, after flashing the ftf the device boot normally but the bloody ass error still persist I can't make or receive phone calls the phone app is crashing, of course, since the root is not available luckypatcher will not solve the problem and to be honest I don't know what is the relation between this error and luckypatcher.
The funny thing after the process succeed the phone showing that the software is up to date man !!
more than that when checking software update settings app crashes
I really want to thank you for helping me, I really appreciate it :good:
my last option is downloading 160 fw and flashing it

Have you tried a different dialier app?

First Lock Bootloader Then Flash FTF File.

Feb 2019 update now available

Hope by performance fixes they mean memory leak fix.

I have not seen os ram usage this low after boot in many months.

Did you have round corner?

yaral said:
Did you have round corner?
Click to expand...
Click to collapse
It squared it when I screenshot.

Anybody figure out how to turn off the rounded corners?

Anyone know what the modem sucurity patch is about? Kinda don't want to take it cuz of the sim lock issues awhile back.

enigma2446 said:
Anyone know what the modem sucurity patch is about? Kinda don't want to take it cuz of the sim lock issues awhile back.
Click to expand...
Click to collapse
no clue but i fastboot flashed the images because the OTA refused to work, but flashing the images worked. i'm still able to connect to ATT towers from my sprint sim unlocked PH-1.

TomTheGeek3 said:
no clue but i fastboot flashed the images because the OTA refused to work, but flashing the images worked. i'm still able to connect to ATT towers from my sprint sim unlocked PH-1.
Click to expand...
Click to collapse
Noob question here: When using fastboot to flash the update image, do you have to worry about the "slot A" vs "slot B" thing?? Can you provide a little more insight? I've been reading around the forum, and I'm a little worried about bricking my phone! (The bootloader on my phone is unlocked and I've rooted the phone, but I haven't flashed a third-party ROM. The OTA update feature gives me a "couldn't update" message.)

adiejg said:
Noob question here: When using fastboot to flash the update image, do you have to worry about the "slot A" vs "slot B" thing?? Can you provide a little more insight? I've been reading around the forum, and I'm a little worried about bricking my phone! (The bootloader on my phone is unlocked and I've rooted the phone, but I haven't flashed a third-party ROM. The OTA update feature gives me a "couldn't update" message.)
Click to expand...
Click to collapse
No you don't have to worry about it. The flash all file in the zip will do all the work for you. It wont take update via ota because you have to be on the stock boot.img. the stock boot img has the recovery built into the ramdisk there for if your rooted then there is no stock recovery to use for ota. Be cautious because flashing via fastboot will wipe the phone.

enigma2446 said:
No you don't have to worry about it. The flash all file in the zip will do all the work for you. It wont take update via ota because you have to be on the stock boot.img. the stock boot img has the recovery built into the ramdisk there for if your rooted then there is no stock recovery to use for ota. Be cautious because flashing via fastboot will wipe the phone.
Click to expand...
Click to collapse
If I edit the .bat file and remove "format userdata", that will prevent the wipe?

njsges said:
If I edit the .bat file and remove "format userdata", that will prevent the wipe?
Click to expand...
Click to collapse
It should without issues but always prepare for hickups.

Anyone else having issues when trying to update to the February release? I tried to sideload the OTA update and that kept giving me the error "adb sideload failed to read command: no error" and then I decided to follow Morphius's suggestion here to just unroot my device by flashing to stock bootloader in order to try to take the OTA update and that OTA keeps failing as well. Anyone else having this issue?

hssxda said:
Anyone else having issues when trying to update to the February release? I tried to sideload the OTA update and that kept giving me the error "adb sideload failed to read command: no error" and then I decided to follow Morphius's suggestion here to just unroot my device by flashing to stock bootloader in order to try to take the OTA update and that OTA keeps failing as well. Anyone else having this issue?
Click to expand...
Click to collapse
Are you rooted?

After three days running, memory Leak not fixed.. Bummer

enigma2446 said:
No you don't have to worry about it. The flash all file in the zip will do all the work for you. It wont take update via ota because you have to be on the stock boot.img. the stock boot img has the recovery built into the ramdisk there for if your rooted then there is no stock recovery to use for ota. Be cautious because flashing via fastboot will wipe the phone.
Click to expand...
Click to collapse
Again, a very noob question, (and I do apologize) but can I use something like Titanium Backup to make sure I can restore all my apps the way they were after I flash the update via fastboot? Reinstalling everything seems like a gigantic pain in the backside.

adiejg said:
Again, a very noob question, (and I do apologize) but can I use something like Titanium Backup to make sure I can restore all my apps the way they were after I flash the update via fastboot? Reinstalling everything seems like a gigantic pain in the backside.
Click to expand...
Click to collapse
Titanium Backup used to require root access. You probably need to be rooted before you update via fastboot and run the backup through Titanium Backup. Then you will need to copy your backup files to a computer because fastboot flashing will erase your phone data. Next apply the fastboot update, root again, copy your backup back to the phone and restore your backup.

enigma2446 said:
Are you rooted?
Click to expand...
Click to collapse
I was but I followed all the proper steps but for some reason this morning my computer wouldn't real the OTA zip file. I tried it tonight using a different USB port on my laptop and it is worked first time... so weird...

d14r1 said:
After three days running, memory Leak not fixed.. Bummer
Click to expand...
Click to collapse
I don't have memory leak anymore..
1.5gb ram not in usage.
The last time I restarted my phone was after the update.

I'm using my Essential 'phone in the UK having recently purchased it used. On the 7th I had a notice to say that an update was available. When I tried to install it it downloaded, but refused to install saying: Couldn't update... installation problem. As far as I know the 'phone is running the stock software but I noticed that no updates had been installed since October 2018. I unchecked 'allow bootloader unlocking' in case that was the issue, but still couldn't perform the update.
I went onto the Essential website and downloaded the OTA image to my iMac, then, following the guide, sideloaded the update on to the 'phone. This worked well and I now have an updated PH-1. I'll have to see if March's update now installs correctly or not.

so.... am i reading this right... and here is my thinking...
to keep root and still take the OTAs
- go to Essentials site and download the image zip
- (to keep root) copy boot.img to your device, patch it through magisk, then copy it back to your ota folder.
- open flashall.bat, comment the format userdata (to keep your data), change the boot.img line to patched_boot.img
- run flashall.bat
- profit

Unresponsive touch screen in TWRP - how can install a ROM?

So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots? I wish I could check but since my touch screen doesn't work in TWRP..
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?

kerelberel said:
So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, where do I download it, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots?
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?
Click to expand...
Click to collapse
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip

vinoxflame said:
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip
Click to expand...
Click to collapse
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.

kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
then try another version of twrp or the unofficial orangefox recovery for our device

vinoxflame said:
then try another version of twrp or the unofficial orangefox recovery for our device
Click to expand...
Click to collapse
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.

kerelberel said:
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.
Click to expand...
Click to collapse
it's on the telegram group

vinoxflame said:
it's on the telegram group
Click to expand...
Click to collapse
No it is not. There's no mention of G7 Power in the search results. Only E5.

kerelberel said:
No it is not. There's no mention of G7 Power in the search results. Only E5.
Click to expand...
Click to collapse
deleted

vinoxflame said:
https://t.me/mG7Power
tell me if it is not!!!!
Click to expand...
Click to collapse
From the desktop search in this one I couldn't find it: https://t.me/OrangeFoxRecovery I didn't know there was a separate chat for each device. But thanks.

FWIW when this happened to me I did the blankflash thing to get it back to bootloader. Then I used the LMSA tool from Motorola to do a rescue/restore.
I also used LMSA to force the update to the most recent security update. In general, it seems a very useful utility.
https://www.motorola.com/us/lenovo-motorola-smart-assistant

I had this issue after blankflashing this temperamental device out of a brick. While in twrp you can do "adb shell" then "twrp install /path/to/zip" I think this has to do with new twrp versions on older firmwares

kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done.
---------- Post added at 06:06 PM ---------- Previous post was at 05:58 PM ----------
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done. The latest stock RETUS build i can find is here https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip but if i do that i will lose all my apps AGAIN etc I am trying to just get the stock recovery img from previous version so I can install the ota in magisk you just tap uninstall tap restore images to get stock boot as well then ota should work once its done go back into magisk and install to inactive slot but you will or could need TWRP A/B retention script so that you keep it even after ota...which you will first go in magisk tap uninstall restore images, but must have stock recovery not twrp installed at this time either from what i can tell, once ota is successful install the TWRP A/B Retention script but do this before you install magisk to inactive slot from magisk manager after that it should work. But I cannot locate a stock recovery.img thus far.... and I dont wanna redownload my apps right now, so I may just wait til I see a rom i really think ill like and say screw it.

kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.

s33b said:
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.
Click to expand...
Click to collapse
I've flashed another stock rom (https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138) and it worked with twrp-3.3.1-0-ocean.img not with the newest.

kerelberel said:
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
Click to expand...
Click to collapse
You use fastboot commands in the bootloader.
The firmware contains a flash file with all fastboot commands you'll need.
kerelberel said:
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
Click to expand...
Click to collapse
TWRP has adb enabled by default. So instead of TWRP you can use
Code:
abd shell twrp --help
So you can use the basic functions like backup, install, and so on.

I had the same issue...
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.

TheGuysGuysGuy said:
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.
Click to expand...
Click to collapse
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)

roadkill42 said:
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)
Click to expand...
Click to collapse
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.

TheGuysGuysGuy said:
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.
Click to expand...
Click to collapse
The problem with the touch is the right driver needs to b installed that kernel I shared makes it work and stick I'm on it now go to tellagram group Moto g7 power support group both twrp and ofox there that works not the one from twrp it's self and the twrp there has some other features that one from official one has that don't work

This boot image gave me a touchscreen and allowed me to flash a regular twrp: hxxps://f.emvn.me/android-roms-and-stuff/twrp.3.4-kakarot.boot.img
Thanks to whoever made it.