1. Enable USB debuging and check always trust this computer
2. Open Click Here To Root
3. Wait untill is says ROOT COMPLETE than open Superuser from the app drawer (Should be there when done)
Link :Mod edit. Link removed.
Method Created by Team DevDigite
This is just a simple install tool
Edit: Bootloader Must be unlocked go to HTCdev and select other supported device it will explain the rest
Link is dead
OP, you must ask permission to post others work.
Related
The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
http://d-h.st/K6W
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED Must link to the main thread.
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS
Is It Safe to Flash CWM Recovery ON Canvas Magnus Is It Really Tested I have A Canvas Magnus and I want to Install CWM recovery on it.
sayan8 said:
The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
Mod Edit Link Removed
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED - Untested recovery
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS
Click to expand...
Click to collapse
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.
Minimilised_MR said:
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.
Click to expand...
Click to collapse
Hey Bro i didnt copied -_-.
Thread Re-opened
Thread temporarily closed pending XDA investigation.
Thread re-opened. Rom download link re-established.
Links removed for Framawork.apk, as the link should be directed to the apk's XDA thread by the original author.
Especially for the CWM Recovery that the OP has not been tested. If the recovery was not compiled using all correct fstabs, the result will be a corrupted/damaged partition, and possibly a perma-bricked device.
MD
I am also looking for stock rom and stock recovery. How to take back up of these??
So i can go ahead and install cwm and root
A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed. Release
A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed.
Release note: Integrated ‘foneclay’ in the software.
https://www.adrive.com/public/UvawHB/S9204P_MP_IN_MMX_18_FLASHER_USER.rar
Please support me by hitting the THANKS BUTTON for me
Please regular update forum.....
Sent from my Samsung Galaxy S4 Mini GT-I9505 using XDA Premium 4 mobile app
Check below link for All in One Guide for Canvas Magnus. Regularly updated
http://forum.xda-developers.com/showthread.php?p=48466519
http://forum.xda-developers.com/showthread.php?t=2569049
Hello to everyone.
I'm using Lenovo A560 and want to root it to delete all those junk, built-in apps so that my RAM usage will decrease. I have tried many times using various root software (rootgenius, kingo, framaroot) yet didn't successful to root my a560. I have already installed usb driver for lenovo a560. Anyone can help me? I already have tried to root my phone like in the http://forum.xda-developers.com/showthread.php?t=2769260 thread but still the same problem occurred.
When i used rootgenius, my phone just reboot and reboot until 86% and the process failed. same on the kingo (except my phone did not reboot like before, it just failed after a reboot). In framaroot, the #error 6 message pop out.
Anyone can help me how to root my phone please? My phone system:
Android 4.3
Baseband ver : A560_A_0001_140330
Kernel Ver: 3.4.0-g80ec9c8-01182-gb30d6a7-dirty [email protected] #6
Build Num : A560_S010_143330
#just put every details for that i'm a newbie in these things. Any help would be very appreciated. (manual root not recommended, but still can try~)
Thanks!
Same problem here. Anyone can help please? Android 4.3 running on Lenovo A560.
problem solved.
I finally managed to root my a560 by installing the driver from the phone into the PC . Then I used iRoot to root my phone. It works! I followed the methods provided by a Russian blog (cannot post outside link because I'm a new user,credit to the blog)
Here's the methods (translated, contains grammar errors).
Remember, you're doing it at your own risk. The site administrator can not be held liable for the actions that you make.
1. Download and install the program on your computer VRoot
2. Disable antivirus (as needed).
3. Run the program, connect the device to your computer (if it is not defined, then try to install the drivers from the official site of your device). On the phone should be included: Debugging via USB, install from unknown sources in the USB connection must be uncheck MTP and Camera (RTR).
4. Once the device is determined, press the bottom right button green "ROOT", and wait.
5. Then, after the last window, the device will reboot (And it can be disconnected from the computer).
6. Root entitled to receive!
Russification (Thanks to Timur):
- Set on the PC this Chinese VRoot
- Put on sotik "Chinese" root-rights
- Then go to the Play Store, we set out SuperSU
- Run it, he will offer to update binary.
- Click to continue, and then click "OK". Pops request of the Chinese root.
- Press the right button zelёnenkuyu. After SuperSU say that the installation is successful, it will prompt you to delete other applications control root-access.
- Click "Yes" forward (SuperSU remove our "Chinese" and replace it with a more simply). Writes again about the successful installation.
Note : The phone will ask you something in Chinese after you root the phone. Just click the right button when the phone pop-up something after you root. This is because right button is the 'YES' and left one is 'NO' and i think that is the phone is asking for root permission.
P/s : for some reason I cannot delete the pre-installed software on my phone, even using root explorer. Anyway, the softwares that need the phone rooted can be installed.
Mr.Droid Developement & Hacking
Get Root Kits, Recovery(s),ROM(s),Apk Mods,Xposed Modules, FAQ Answears& Other TweeksFor Assistance & Help
Contact :-
# Darshan
Mod Edit: Removed phone #
Happy Hacking
How To Root Android Devices]Root MediaTek Devices:-
PROCEDURE :
First enable USB Debugging in your phone. To do this go to Settings->Developer options and enable USB Debugging in it. In case you dont find developer options in your settings just go to Settings->About phone. There you can see build number. Tap it 5 times and you can get Developer options now.
Download and install PDA net drivers
Now download Graphical Auto Root tool
Now extract the root tool and connect your phone to PC.
Now run the .exe file of root tool.
You will see some Chinese thing. Just tap the button and it will start rooting your phone. Reboot your phone after it finishes.
If you are successfully rooted u can see Supersu appearing and you can use it check if you have rooted it correctly.
Downloads
PDA net drivers Mod Edit: Removed links
Graphical Auto Root tool Mod Edit: Removed links
Root Qualcomm Snapdragen 410 Devices :-
PROCEDURE :
Install Root Checker to verify my device is not already rooted.
Go to System settings->Security to make sure “Unknown Sources” is checked.
Open my phone web browser, and download framaroot 1.8.1.
Install and run framaroot
Tap on “Faramir” to install SuperSU
Verify my device is rooted with Root Checker —> Success! Fnished!
Downloads
Mod Edit: Removed links
Root Intel Devices:-
Download The Root Tool Bellow & Flash Using CMD
Use the text note in the zip file which you download
(Tried only on zenfoe 4,5,6)
Downloads
Mod Edit: Removed links
Root ARM Devices:-
Download The Root Tool
Unzip the file
open it
follow the steps
Enjoy
Downloads
Mod Edit: Removed links
Other Root Tools
If you fail to root by your processer root tool try the tool given bellow
Downloads
Kingoroot
Mod Edit: Removed links
Unlock Root Pro
Mod Edit: Removed links
How to flash Recovery On Android Devices
Hi,
XDA Assist not the right place to post such guides , please post in your device specific Forum
Thread Closed.
If you wont to use snapchat on rooted device just do it:
1. Install Root Switch
2. If you have installed Magisk go to settings and find Magisk Hide turned on (if you don't have it just skip this step)
3. Open Root Switch tick 'Stop all us daemons'
4. Enable Root Switch
5. Open Snapchat log in
6. Again open Root Switch and disable it
7. Enjoy your Snapchat
Root Switch download link: Mod Edit: Link removed.
special thx to Nerd Magic
Video guide: Mod Edit: Link removed.
Enjoy :good:
Thread closed. Pay per click links are not allowed on xda, or videos containing affiliate sales links.
deleted
ht2000 said:
These are two links showing two preview images.
https-://image.ibb.co/bHFrK5/Screenshot_20170821_082926.png
https-://image.ibb.co/dMJve5/20170821_082847.jpg
Notes:
Before you get started, you will need access to Developer options. Got to About phone on Settings and click on your Build number till you get a notification stating that you've gained access to this options.
After that, enable both OEM unlocking and USB debugging to unlock the bootloader and gain permission to transfer downloaded files from your PC to your phone via the charging cable.
If your software firmware is 6.0.1-01003, don't update your system to be safe since that I haven't tested installing TWRP on a updated firmware.
Tutorial:
To get started, you will need to download this .img file which contains a flashable TWRP 3.0.2-0 that is unofficially supported for the Alcatel Pop 4 and import it to your device.
https-://uplo.adfi.l.es.io/x.9h.18
In order to flash the TWRP .img image, you will need to gain access to temporary root and in order to do that, you'll need to install KingRoot. To install it, enable Unknown sources if disabled then visit the site below to download and install it.
https-://kingroot.net/
You should see something like this.
https-://ufile.io/491p5
Download SuperSU's Latest .ZIP file below (Should be V2.82 as of 21/08/17)
s.upersu.com/download
Its normal if your phone reboots during the process. Just make sure that you quickly unlock your phone and return to KingRoot to continue the process after your device has rebooted.
After you have successfully rooted your phone, you will need to install Flashify in order to flash the TWRP image I provided you with. The link to install Flashify is below.
https-://play.google.com/store/apps/details?id=com.cgollner.flashify
Since that the temporary root that came with KingRoot is very unstable with the Pop 4, be very gentle navigating through the phone for the time being or your device may reboot and you will need to reroot with KingRoot again.
Open the Flashify app, grant root permissions, go to Recovery image then click on choose a file. After that find the downloaded TWRP that I provided you with, click and it and select YUM! (Meaning yes) to flash TWRP. After it has flashed TWRP, it should give you the option to reboot into TWRP.
Once your booted into TWRP, swipe right to gain access to read and write privileges and make sure you check the box above so you don't have to do that again.
Click Wipe, Format Data then enter "yes" without the quotations of course then press the blue button on the bottom right of the on screen keyboard to format the device.
After the device is formatted go back instead of rebooting, press the on screen back button then install and find the SuperSU .ZIP you've downloaded then swipe right to flash. After flashed, clear cache then reboot.
After it has rebooted, set up the device as if it was new then after set up you should see that you've got SuperSU in your app list.
To access TWRP in the future, hold power button and up volume button till TWRP boot screen loads up.
I will upload a test video showing me using my rooted Pop 4 soon.
I have edited the links so they wouldn't be detected by xda since i'm not allowed to post any links as of right now since i'm using a new account.
Click to expand...
Click to collapse
MOD ACTION:
Thread closed at the request of the OP.