Related
*READ FIRST*
This thread is now completely dedicated to the aspect of Carrier Switching on the Snapdragon model of the Galaxy S8/S8+, the current root progress can be seen here:
Current ROOT Progress for G950U/G955U Snapdragon
Please Note that if your device is network locked this WILL NOT unlock it for use on other carriers, however it will allow the switching of carriers and carrier specific features on network unlocked devices just by changing sim cards, the device will reboot and your done. As for those with a network locked device this thread still applies to you, if you are interested in a bloat free experience(that is faster and smoother than stock touchwiz), on your Galaxy S8/S8+
Let's Begin!
Download the firmware for the unlocked S8/S8+ here:
G950U1UE1AQDC_XAA
Download the Prince Cosmy version of Odin here:
Odin_3.12.3_Modified
Enable developer options on your device:
Settings----->About Phone----->Click Build Number 7 times
Enable USB Debugging:
Settings----->Developer Options-----USB Debugging
Put your device into download mode: Volume Down + Bixby + Power
(accept the warning and connect your device to your computer)
Take the G950U1.zip you downloaded in step 1 and extract it, then place the BL,AP,CP,and CSC files into their corresponding places within Odin and press start
Once finished the device will boot back up and you will be free to disconnect it from your computer
You now have the unlocked, bloat free, firmware on your S8/S8+
CONTRIBUTORS
@Maltego for hosting files
@mweinbach for originally getting the unlocked firmware and for posting a tutorial on flashing it
@Acoustichayes for creating a dedicated root thread
Delete
I have the s8+ version installing now. Will report back. Op make sure they uncheck Auto reboot and f. Reset time in odin first.
Sent from my Nexus 6P using Tapatalk
I've been getting protocol version errors trying to flash via odin 3.10 (the only one that I can download)
EDIT: installing now, needed the latest odin
Akumai said:
I've been getting protocol version errors trying to flash via odin 3.10 (the only one that I can download)
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=529152257862722617
Here is Odin 3.12.3
Persianhawkes said:
I have the s8+ version installing now. Will report back. Op make sure they uncheck Auto reboot and f. Reset time in odin first.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
This is for an s8....Not plus. Be careful.
suzook said:
This is for an s8....Not plus. Be careful.
Click to expand...
Click to collapse
I know. I have the s8+ file. Flashed and booted up now I have to do some tinkering.
Sent from my Nexus 6P using Tapatalk
I can't wait to give this a run this weekend
Persianhawkes said:
I know. I have the s8+ file. Flashed and booted up now I have to do some tinkering.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Oh, ok. Didn't realize that. So does this overwrite the carrier info? Or is that untouched?
suzook said:
Oh, ok. Didn't realize that. So does this overwrite the carrier info? Or is that untouched?
Click to expand...
Click to collapse
As of right now there is no way to overwrite carrier info, we are working on it though. That reserved comment is going to be where i put all that is known, been tried, etc with carrier switching just a little busy right now
My build number is SM-G950A and my firmware is G950USQU1AQD9. I am quite familiar with the concept and process of rooting but I have never had an opportunity to actually get into it. I was wondering if my device is compatible with this firmware. If so I am fine with testing so long as there is a reliable way to restore my phone if something were to happen.
Triforce1001 said:
My build number is SM-G950A and my firmware is G950USQU1AQD9. I am quite familiar with the concept and process of rooting but I have never had an opportunity to actually get into it. I was wondering if my device is compatible with this firmware. If so I am fine with testing so long as there is a reliable way to restore my phone if something were to happen.
Click to expand...
Click to collapse
I went ahead and did the favors of doing some testing, in terms of restoral anyhow. From my experience, you do not have access to the usual desktop, and you have very few apps by default(none actually, just settings). I was able to revert to the original stock firmware via odin without a hitch. I did not try installing TWRP on this firmware however, but I can confirm the existence of OEM Unlock, which, by itself, claims to unlock the bootloader.
Triforce1001 said:
My build number is SM-G950A and my firmware is G950USQU1AQD9. I am quite familiar with the concept and process of rooting but I have never had an opportunity to actually get into it. I was wondering if my device is compatible with this firmware. If so I am fine with testing so long as there is a reliable way to restore my phone if something were to happen.
Click to expand...
Click to collapse
This is compatible with your device all US versions of the S8 and S8+ have the same model number. I have your stock firmware i just need to upload it to androidfilehost
If anyone feels like it joining I have created an IRC room we can all chat in and brainstorm things. It's #sgs8 on irc.freenode.net. Hasn't had many users since I created it but I lurk in there when I'm at home. I'd love some company. Let's get this thing rooted so we can shut all the haters up!
Glad to see more devs working on this
Akumai said:
I went ahead and did the favors of doing some testing, in terms of restoral anyhow. From my experience, you do not have access to the usual desktop, and you have very few apps by default(none actually, just settings). I was able to revert to the original stock firmware via odin without a hitch. I did not try installing TWRP on this firmware however, but I can confirm the existence of OEM Unlock, which, by itself, claims to unlock the bootloader.
Click to expand...
Click to collapse
I attempted to install TWRP on it but secure check fail boot i believe i will try again, but we only have the exynos twrp for the S8 to work with....
Unless someone can make a compatible version for Snapdragon?
Akumai said:
I went ahead and did the favors of doing some testing, in terms of restoral anyhow. From my experience, you do not have access to the usual desktop, and you have very few apps by default(none actually, just settings). I was able to revert to the original stock firmware via odin without a hitch. I did not try installing TWRP on this firmware however, but I can confirm the existence of OEM Unlock, which, by itself, claims to unlock the bootloader.
Click to expand...
Click to collapse
On no device that ive seen does OEM unlock in fact unlock the bootloader.
sent from my S8 plus, Note 7 or S7 Edge
STF_TimelessGoD said:
I attempted to install TWRP on it but secure check fail boot i believe i will try again, but we only have the exynos twrp for the S8 to work with....
Unless someone can make a compatible version for Snapdragon?
Click to expand...
Click to collapse
Contact @ashyx he's very good with Samsung and TWRP
force70 said:
On no device that ive seen does OEM unlock in fact unlock the bootloader.
sent from my S8 plus, Note 7 or S7 Edge
Click to expand...
Click to collapse
it merely mentioned that it allows "the unlocking of the bootloader"
Akumai said:
it merely mentioned that it allows "the unlocking of the bootloader"
Click to expand...
Click to collapse
Thats not what that means is what im trying to say lol. That option on sammy phones has never really done much other than allow flashing in odin
What is of note is that i dont have that on my S8 which is new that option is always there.
Hello,
Currently My J7 got stuck on boot window, all i can i do is to be able to reach the download mode, therefore i downloaded a custom rom (this one: https://forum.xda-developers.com/galaxy-j7/development/rom-t3713641 )
But I can't flash this using Odin, I'm very new to this, so what's the problem? How can i install this rom using odin?
Custom ROMS are generally flashed via TWRP (or similar installations). Odin is used to fix issues using stock firmware. I'd Google search both in your case. If your phone is down, you may have to flash stock firmware (via Odin) first, then follow well documented root procedures for your device model number (I'm guessing it's the exynos J7 Tmobile or Metro PC variety judging from the rom you linked). First order of business would be correctly identifying your phone model, then proceeding from there. Happy hunting!
Aimless Rambler said:
Custom ROMS are generally flashed via TWRP (or similar installations). Odin is used to fix issues using stock firmware. I'd Google search both in your case. If your phone is down, you may have to flash stock firmware (via Odin) first, then follow well documented root procedures for your device model number (I'm guessing it's the exynos J7 Tmobile or Metro PC variety judging from the rom you linked). First order of business would be correctly identifying your phone model, then proceeding from there. Happy hunting!
Click to expand...
Click to collapse
My phone is J7(2015) and I'm downloading the stock rom right now. Thank you for the information!^^
mew1010 said:
My phone is J7(2015) and I'm downloading the stock rom right now. Thank you for the information!^^
Click to expand...
Click to collapse
No worries. I know the J7 has a plethora of sub-model numbers, it can be a little confusing. Just be sure to get as specific as possible regarding your specific device. The J700T for example needs J700T firmware, even though it fits into that broad range of Exynos J7 (or J7 2015). Thats the only J7 I'm familiar with, just stating the obvious need for precision. Good luck with flashing!
Hey guys,
My dad has a SM-G930A 6.0.1 unlocked running on T-Mobile. It is starting to show it's age (battery drain, apps not running like they should, etc.) and is still stuck on 6.0.1.. From my understanding, it should be possible to flash to SM-G930T, however I am a bit lost as to where to begin the process to do so. I tired going straight to 8.0 by flashing the SM-G930T 8.0 firmware files but this didn't work (I didn't think it would work, but it was worth a try). With that said, would it be better for me to just stick to updating to SM-G930A 7.0 via the guides posted, or is there a way for me to Flash the SM-930T 8.0 firmware? Thanks in advance.
leprkon said:
Hey guys,
My dad has a SM-G930A 6.0.1 unlocked running on T-Mobile. It is starting to show it's age (battery drain, apps not running like they should, etc.) and is still stuck on 6.0.1.. From my understanding, it should be possible to flash to SM-G930T, however I am a bit lost as to where to begin the process to do so. I tired going straight to 8.0 by flashing the SM-G930T 8.0 firmware files but this didn't work (I didn't think it would work, but it was worth a try). With that said, would it be better for me to just stick to updating to SM-G930A 7.0 via the guides posted, or is there a way for me to Flash the SM-930T 8.0 firmware? Thanks in advance.
Click to expand...
Click to collapse
Wow you guys really get screwed over there in the US with cell phones. It's a pain in the a** to do anything with your phones.
Anyway I'm guessing the phone was originally AT&T right? And now it's unlocked to any carrier.
If you just want to update the phone to the latest firmware then just flash AT&T Oreo. It won't affect the SIM it will still work as before.
If you want to flash any other firmware including T Mobile then you'll need to unlock the bootloader on the device and that's a whole different ball game. With plenty of guides on how to online.
Make sure you back up all the things you want to keep before flashing
cooltt said:
Wow you guys really get screwed over there in the US with cell phones. It's a pain in the a** to do anything with your phones.
Anyway I'm guessing the phone was originally AT&T right? And now it's unlocked to any carrier.
If you just want to update the phone to the latest firmware then just flash AT&T Oreo. It won't affect the SIM it will still work as before.
If you want to flash any other firmware including T Mobile then you'll need to unlock the bootloader on the device and that's a whole different ball game. With plenty of guides on how to online.
Make sure you back up all the things you want to keep before flashing
Click to expand...
Click to collapse
Thanks for the reply! I appreciate the direction. You are right, US phones are a pain. And yes, the phone was originally an AT&T phone, but was unlocked.
As for unlocking the bootloader, I've found different sources that say that unlocking the bootloader on this particular phone is not possible with this particular phone. I did read something about an engineering bootloader being used to get around a locked bootloader for rooting. Could this be used for flashing as well?
cooltt said:
If you want to flash any other firmware including T Mobile then you'll need to unlock the bootloader on the device and that's a whole different ball game. With plenty of guides on how to online.
Click to expand...
Click to collapse
That's not entirely true. Using Odin you can flash any USA firmware onto any other USA device, no bootloader unlocking required.
It's very common for people to flash G930U over their G930V/T/A/P devices to remove bloatware
leprkon said:
As for unlocking the bootloader, I've found different sources that say that unlocking the bootloader on this particular phone is not possible with this particular phone. I did read something about an engineering bootloader being used to get around a locked bootloader for rooting. Could this be used for flashing as well?
Click to expand...
Click to collapse
It's unstable and only lets the device charge up to 80%, your best bet woulld just be a full flash with Odin
This guide is a bit dated but it's the best one out there. Just make sure you google the latest Odin and use all 4 firmware files when flashing https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Beanvee7 said:
That's not entirely true. Using Odin you can flash any USA firmware onto any other USA device, no bootloader unlocking required.
It's very common for people to flash G930U over their G930V/T/A/P devices to remove bloatware
It's unstable and only lets the device charge up to 80%, your best bet woulld just be a full flash with Odin
This guide is a bit dated but it's the best one out there. Just make sure you google the latest Odin and use all 4 firmware files when flashing https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks for the reply! I had tried flashing the 8.0 G930T variant last night with the latest version of Odin and the PrinceComsy version and got a Model Mismatch error. I read that the modified Odin3 v3.13.1_3B_PatcheD would let me flash the firmware and ignore the Model Mismatch error. However, I didn't go through with it because I was not sure if I would brick my phone and instead erred on the side of caution and made my post here. Would I be safe to flash the files from SM-G930T_1_20180625111401_xf3965l42p_fac onto my current device?
If your firmware files are from a trusted source like sammobile, updato or samfirmtool then it should be fine
Odin3 v3.13.1_3B_PatcheD seems to have positive feedback here on XDA so should be fine too https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Beanvee7 said:
If your firmware files are from a trusted source like sammobile, updato or samfirmtool then it should be fine
Odin3 v3.13.1_3B_PatcheD seems to have positive feedback here on XDA so should be fine too https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
Thanks for the assist! Everything worked like a charm!
leprkon said:
Thanks for the assist! Everything worked like a charm!
Click to expand...
Click to collapse
Great glad it all worked out
leprkon said:
Thanks for the assist! Everything worked like a charm!
Click to expand...
Click to collapse
Greetings-
I apologize for jumping in an already created thread, but I think I am in the same situation, and like to verify with you both before I use the advice please. I have a SM-G930T that I just purchased, and really like to run a custom rom. But I understand I can not because I have Android 8 on it. I know how to use Odin, and have the latest version plus you guys talked about it here. I have also already downloaded the stock rom from sammobile site. What are my options? Is there a rom I can flash the phone with using Odin that would provide better performance, less G..bage, and more battery life? Is there a way for me to root the phone? I really need an app that requires the phone to be rooted.
Thanks
[email protected] said:
Greetings-
I apologize for jumping in an already created thread, but I think I am in the same situation, and like to verify with you both before I use the advice please. I have a SM-G930T that I just purchased, and really like to run a custom rom. But I understand I can not because I have Android 8 on it. I know how to use Odin, and have the latest version plus you guys talked about it here. I have also already downloaded the stock rom from sammobile site. What are my options? Is there a rom I can flash the phone with using Odin that would provide better performance, less G..bage, and more battery life? Is there a way for me to root the phone? I really need an app that requires the phone to be rooted.
Ok, so flash any unbranded Stock Rom for your device using this version of Odin which has been specifically modified to flash US devices. https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572 PatcheD.zip is the file you want to download.
Then when you have checked the phone is working ok on undrnaded firmware you can go ahead and root the device using this method which is again for US Qualcomm devices. https://www.****************/2018/0...on-galaxy-s7-and-s7-edge-on-android-8-0-oreo/
Take you time and read instructions.
Click to expand...
Click to collapse
Can I get unbranded stock firmware from sammobile? I understand the generic meaning of it, but I need more information on how to get them and what I need to know to work with them.
[email protected] said:
Can I get unbranded stock firmware from sammobile? I understand the generic meaning of it, but I need more information on how to get them and what I need to know to work with them.
Click to expand...
Click to collapse
If I understand it correctly there is no unbranded firmware for the US, its all network specific but you can flash unbranded UK firmware and it will work fine, UK BTU is the one you want from sammobile.
Load into the modified version of Odin and flash.
This is what I found, and downloading.
[email protected] said:
This is what I found, and downloading.
Click to expand...
Click to collapse
Yes that's the right one but like the beanvee and i have said there is a specific way to flash this stock then root the device.
You also need Samsung USB drivers installed so your pc can talk to your device, there's plenty of guides around how to flash with Odin and what you need to do beforehand, the only difference with you is the version of Odin your using and then the method of rooting afterwards.
cooltt said:
Yes that's the right one but like the beanvee and i have said there is a specific way to flash this stock then root the device.
You also need Samsung USB drivers installed so your pc can talk to your device, there's plenty of guides around how to flash with Odin and what you need to do beforehand, the only difference with you is the version of Odin your using and then the method of rooting afterwards.
Click to expand...
Click to collapse
Thanks. I have used Odin before, and I already downloaded the patchD version of Odin from the link. Thank you so much. I'll keep you posted on how it turns out. I still do not have a verified version of a custom recovery for this. Do you guys know of any? I found this link but the link to the suggested twrp does not work. I think it is this one. But I can not be sure. The original link points to a slightly different url.
[email protected] said:
Thanks. I have used Odin before, and I already downloaded the patchD version of Odin from the link. Thank you so much. I'll keep you posted on how it turns out. I still do not have a verified version of a custom recovery for this. Do you guys know of any? I found this link but the link to the suggested twrp does not work. I think it is this one. But I can not be sure. The original link points to a slightly different url.
Click to expand...
Click to collapse
Nope do not use that TWRP, it will flash TWRP but not boot it and you'll be stuck on Samsung logo forever.
There is still no way to unlock a Qualcomm snapdragon bootloader and i'm not sure anyone is working on it anymore.
All it means is you need to flash custom Roms via Odin or possibly the inbuilt S7 recovery, you just need to check the ROM is in a format which can be flashed that way.
With regards to finding a TWRP solution you'll have to do some serious searching on google and read everything.
There are already several de-bloated stock Roms on the forum if thats what you want to do. Root and custom recovery TWRP are two different things though, you get rooted so your good to go?
cooltt said:
Nope do not use that TWRP, it will flash TWRP but not boot it and you'll be stuck on Samsung logo forever.
There is still no way to unlock a Qualcomm snapdragon bootloader and i'm not sure anyone is working on it anymore.
All it means is you need to flash custom Roms via Odin or possibly the inbuilt S7 recovery, you just need to check the ROM is in a format which can be flashed that way.
With regards to finding a TWRP solution you'll have to do some serious searching on google and read everything.
There are already several de-bloated stock Roms on the forum if thats what you want to do. Root and custom recovery TWRP are two different things though, you get rooted so your good to go?
Click to expand...
Click to collapse
Yes root is my main goal, and you are right the debloated roms will work just fine. I can do w/o twrp. Just double checking here; since I am flashing the UK rom, and I believe one of the comments on this thread was how US images are locked tighter, would not I be able to find a UK version of TWRP for my phone? Just checking.
[email protected] said:
Yes root is my main goal, and you are right the debloated roms will work just fine. I can do w/o twrp. Just double checking here; since I am flashing the UK rom, and I believe one of the comments on this thread was how US images are locked tighter, would not I be able to find a UK version of TWRP for my phone? Just checking.
Click to expand...
Click to collapse
Now pull up a chair and listen closely.....99% of the American devices (including yours) have an extremely uncooperative Qualcommm Snapdragon cpu at it's heart and thus refuses point blank to play ball. The online community have done a fantastic job creating the modifications you are now using. The rest of the world (i'm happy to say) enjoy the S7 with an extreamly cooperative Exynos cpu at it's heart. It just loves to be fiddled with, it's a whore of a chip, constantly on the go with all kinds of neat tricks.
Anyhoo... my point is, the software has to be compatible with the hardware you catch my drift? All the cool little programs are written with a specific piece of hardware in mind, unfortunately for you guys Qualcomm is the ice queen.
cooltt said:
Now pull up a chair and listen closely.....99% of the American devices (including yours) have an extremely uncooperative Qualcommm Snapdragon cpu at it's heart and thus refuses point blank to play ball. The online community have done a fantastic job creating the modifications you are now using. The rest of the world (i'm happy to say) enjoy the S7 with an extreamly cooperative Exynos cpu at it's heart. It just loves to be fiddled with, it's a whore of a chip, constantly on the go with all kinds of neat tricks.
Anyhoo... my point is, the software has to be compatible with the hardware you catch my drift? All the cool little programs are written with a specific piece of hardware in mind, unfortunately for you guys Qualcomm is the ice queen.
Click to expand...
Click to collapse
Thank you so much. You guys are amazingly patient, and informative. Thank you for educating me, and helping me achieve my goal.
I have tried a few times but can not flash the files. I have attached screenshots, and followed the instructions here. Do you see anything I should be doing differently?
I initially thought the code came as one tar file, which I could flash, but it was a zip file, which I had to unpack.
i got the latest security update via OTA and an now running the G930UUEU9CSA3 firmware, ive tried flashing the eng boot img i originally used to root from here "https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616" but odin fails every time, i'm pretty sure its because the new security update updated the bootloader also... to version 9. now i guess my question is are there any eng boot files for the v9 bootloader available yet? or any other usable root methods available?
snaksalot said:
i got the latest security update via OTA and an now running the G930UUEU9CSA3 firmware, ive tried flashing the eng boot img i originally used to root from here "https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616" but odin fails every time, i'm pretty sure its because the new security update updated the bootloader also... to version 9. now i guess my question is are there any eng boot files for the v9 bootloader available yet? or any other usable root methods available?
Click to expand...
Click to collapse
That wasn't very clever was it.
Should never update branded unless it's to fix a major bug. Any loophole which allows root or flash is closed on an update until someone figures out how to root on the new boot loader.
I think the best advice to anyone on US networks is to flash unbranded and go from there.
snaksalot said:
i got the latest security update via OTA and an now running the G930UUEU9CSA3 firmware, ive tried flashing the eng boot img i originally used to root from here "https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616" but odin fails every time, i'm pretty sure its because the new security update updated the bootloader also... to version 9. now i guess my question is are there any eng boot files for the v9 bootloader available yet? or any other usable root methods available?
Click to expand...
Click to collapse
Get magisk.zip from internet , move to a sdcard insert sdcart to s7, Flash twrp for s7 then format data then click install magisk.zip reboot after finish and done.
kpwnApps said:
Get magisk.zip from internet , move to a sdcard insert sdcart to s7, Flash twrp for s7 then format data then click install magisk.zip reboot after finish and done.
Click to expand...
Click to collapse
I'm fairly certain that the only twrp for the s7 is a temporary one because there is no unlock for the bootloader, and even still the temp twrp is only compatible with the v4 bootloader and I am currently on v9.... that is unless I'm mistaken if I am then please someone correct me and point me in the right direction because I'd love to be running magisk on my s7 : )
cooltt said:
That wasn't very clever was it.
Should never update branded unless it's to fix a major bug. Any loophole which allows root or flash is closed on an update until someone figures out how to root on the new boot loader.
I think the best advice to anyone on US networks is to flash unbranded and go from there.
Click to expand...
Click to collapse
No it most definitely was not very clever at all and unfortunately I'm stuck : / Also is the G930UUEU9CSA3 firmware not unbranded?
snaksalot said:
No it most definitely was not very clever at all and unfortunately I'm stuck : / Also is the G930UUEU9CSA3 firmware not unbranded?
Click to expand...
Click to collapse
Yes it is I didn't read properly. Anyway what odin are you using to flash? The modified one?
We are talking about a qualcomm device yes?
cooltt said:
Yes it is I didn't read properly. Anyway what odin are you using to flash? The modified one?
We are talking about a qualcomm device yes?
Click to expand...
Click to collapse
Yes I'm using the modified Odin and all my previous attempts at flashing the eng boot files via Odin on the v8 bootloader have been successful, it wasn't until after the OTA that I started having issues.
And yes this is Qualcomm : )
snaksalot said:
Yes I'm using the modified Odin and all my previous attempts at flashing the eng boot files via Odin on the v8 bootloader have been successful, it wasn't until after the OTA that I started having issues.
And yes this is Qualcomm : )
Click to expand...
Click to collapse
Hmmm so it may be that loophole is now closed, what you need to think about is if you deffo need root? Or is it just nice to have. I'm sure a dev will get round it soon.
snaksalot said:
I'm fairly certain that the only twrp for the s7 is a temporary one because there is no unlock for the bootloader, and even still the temp twrp is only compatible with the v4 bootloader and I am currently on v9.... that is unless I'm mistaken if I am then please someone correct me and point me in the right direction because I'd love to be running magisk on my s7 : )
Click to expand...
Click to collapse
Twrp will work certainly, i did on my own s7 qualcomm variant with this https://www.google.com/amp/s/forum....de-how-to-root-android-8-0-oreo-t3840271/amp/
kpwnApps said:
Twrp will work certainly, i did on my own s7 qualcomm variant with this https://www.google.com/amp/s/forum....de-how-to-root-android-8-0-oreo-t3840271/amp/
Click to expand...
Click to collapse
Okay I was completely unaware of TWRP being an option or the possibility of Magisk with a locked bootloader, now to clarify I'm running the latest unbranded US Region firmware for the US T-Mobile version of the Qualcomm Galaxy S7 "(TMB) G930UUEU9CSA3" that being said I have a few questions about how to specifically to proceed if you don't mind helping me?
First is the version of Odin available from the post provided above inst the modified version I've been required to use for all my previous flashing "Odin3_v3.13.1_3B_PatcheD" should I use this one or the version provided in the post above "Odin3_v3.13.1"?
My next question is that all the different versions and variants of TWRP available for my device the Galaxy S7 and the S7 Edge are either for Exynos Canada/International or Korea or the Chinese Qualcomm variant of each. Should I download and use the TWRP for the Chinese Qualcomm S7?
The sammobile link in the original post for "Android 8.0 Oreo Stock Rom" provides me with a list of the latest and up to date international versions of firmware for the Galaxy S7 Edge "SM-G935FD" I'm assuming I should just use the stock firmware image for my device "SM-G930U" instead?
The link for the no-verity-opt-encrypt-6.0 is dead but I don't think its needed because of something someone said in the original post about this method failing after latest security update "the one I'm on" https://forum.xda-developers.com/showpost.php?p=78115895&postcount=18 he said he solved it easily with information and another flash able zip from this post https://forum.xda-developers.com/showpost.php?p=77000849&postcount=47 and the zip from here https://forum.xda-developers.com/showpost.php?p=76564735&postcount=37
All that being said I haven't attempted anything yet, I'll try the above method as I understand it later this evening and I'll post my results
snaksalot said:
All that being said I haven't attempted anything yet, I'll try the above method as I understand it later this evening and I'll post my results
Click to expand...
Click to collapse
Hello there, i deleted most of your post because i didn't want my post to be huge. So if i just give you some guidelines hopefully you can have a look around for the files you need.
1. For Qualcomm / snapdragon devices you must always use the patched version of Odin you already have. Now this version of Odin can be dangerous if you don't flash the correct firmware for your device because it ignores device mismatch and other safety measures the normal Odin checks for before flashing. Which brings me to.....
2. Anything for G935 will not work for G930 including TWRP, you must always use firmware, patches twrp which specifically says it for G930 Qualcomm/snapdragon devices.
3. The China/ Korea Qualcomm/snapdragon devices are exactly the same as the US devices, anything working on the China / Korea devices will work on the US device.
Now i know you want to root unbranded on V9 but as you are on the T Mobile network it may be easier to flash and root T Mobile Oreo for the time being until there is a workaround root for V9 unbranded.
All of the threads you linked to were for G935 devices and i've mentioned you can't use those patches BUT the process and step by step instructions you follow are the same for your device. So you can follow those guides as long as you are using the patches for your device.
There is a Snapdragon section on this forum so thats a good place to look.
I've had a quick look for this specific firmware and can't find anything about rooting the U9 version yet.....
I'm just checking this firmware G930UUEU9CSA3 your running did have either XAA or USC code next to it when you downloaded? I've noticed Verizon, AT&T and Sprint are using the same firmware VZN, ATT, XAS.
cooltt said:
Hello there, i deleted most of your post because i didn't want my post to be huge. So if i just give you some guidelines hopefully you can have a look around for the files you need.
1. For Qualcomm / snapdragon devices you must always use the patched version of Odin you already have. Now this version of Odin can be dangerous if you don't flash the correct firmware for your device because it ignores device mismatch and other safety measures the normal Odin checks for before flashing. Which brings me to.....
2. Anything for G935 will not work for G930 including TWRP, you must always use firmware, patches twrp which specifically says it for G930 Qualcomm/snapdragon devices.
3. The China/ Korea Qualcomm/snapdragon devices are exactly the same as the US devices, anything working on the China / Korea devices will work on the US device.
Now i know you want to root unbranded on V9 but as you are on the T Mobile network it may be easier to flash and root T Mobile Oreo for the time being until there is a workaround root for V9 unbranded.
All of the threads you linked to were for G935 devices and i've mentioned you can't use those patches BUT the process and step by step instructions you follow are the same for your device. So you can follow those guides as long as you are using the patches for your device.
There is a Snapdragon section on this forum so thats a good place to look.
I've had a quick look for this specific firmware and can't find anything about rooting the U9 version yet.....
I'm just checking this firmware G930UUEU9CSA3 your running did have either XAA or USC code next to it when you downloaded? I've noticed Verizon, AT&T and Sprint are using the same firmware VZN, ATT, XAS.
Click to expand...
Click to collapse
I'd be interested to know how this turned out if the device with V9 bootloader could be rooted with temp TWRP method.
Can i actually flash magisk on my 930u?
Is there any way to root my g930t ?
I'm on v9 bootloader, and i don't care about knox tripping.
Did developpers really failed to break the security of this little old device ? Or no one worked it ?
cooltt said:
Hello there, i deleted most of your post because i didn't want my post to be huge. So if i just give you some guidelines hopefully you can have a look around for the files you need.
1. For Qualcomm / snapdragon devices you must always use the patched version of Odin you already have. Now this version of Odin can be dangerous if you don't flash the correct firmware for your device because it ignores device mismatch and other safety measures the normal Odin checks for before flashing. Which brings me to.....
2. Anything for G935 will not work for G930 including TWRP, you must always use firmware, patches twrp which specifically says it for G930 Qualcomm/snapdragon devices.
3. The China/ Korea Qualcomm/snapdragon devices are exactly the same as the US devices, anything working on the China / Korea devices will work on the US device.
Now i know you want to root unbranded on V9 but as you are on the T Mobile network it may be easier to flash and root T Mobile Oreo for the time being until there is a workaround root for V9 unbranded.
All of the threads you linked to were for G935 devices and i've mentioned you can't use those patches BUT the process and step by step instructions you follow are the same for your device. So you can follow those guides as long as you are using the patches for your device.
There is a Snapdragon section on this forum so thats a good place to look.
I've had a quick look for this specific firmware and can't find anything about rooting the U9 version yet.....
I'm just checking this firmware G930UUEU9CSA3 your running did have either XAA or USC code next to it when you downloaded? I've noticed Verizon, AT&T and Sprint are using the same firmware VZN, ATT, XAS.
Click to expand...
Click to collapse
Would this info be applicable to edge models as well? Pretty sure our moderator has moved on as he is disgusted with samsungs persistance in blocking root with new bl versions. Im on an unlocked tmo s7 edge with the u firmware as well.
Toolmighty said:
Would this info be applicable to edge models as well? Pretty sure our moderator has moved on as he is disgusted with samsungs persistance in blocking root with new bl versions. Im on an unlocked tmo s7 edge with the u firmware as well.
Click to expand...
Click to collapse
Yes same hardware
cooltt said:
Yes same hardware
Click to expand...
Click to collapse
Can't get twrp to flash. Tried w rom as is, tried factory reset tried reinstall w/o auto reboot. All get same error
what about jruze root?
what about https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616 then flash from safestrap, format data, decript script?
nm it uses flashfire
Toolmighty said:
what about https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616 then flash from safestrap, format data, decript script?
Click to expand...
Click to collapse
Yes by using 1st and #1623 post number it can be rooted easily. I already have done that on both G930P and G930U.
Hello Guys i have been searching all over the internet for a few month, where do i find the boot unlock for this particular phone? I need this in order to root and install lineage OS custom rom
I really appreciate if someone has the information.
CAN ANYONE HELP PLEASE? I need to unlock bootloader for Verizon SM-G930V
ibex333 said:
CAN ANYONE HELP PLEASE? I need to unlock bootloader for Verizon SM-G930V
Click to expand...
Click to collapse
I just picked up this model myself and find myself in the same boat. My developer options do list an "OEM unlock" option. Does yours?
ibex333 said:
CAN ANYONE HELP PLEASE? I need to unlock bootloader for Verizon SM-G930V
Click to expand...
Click to collapse
Emmalfal said:
I just picked up this model myself and find myself in the same boat. My developer options do list an "OEM unlock" option. Does yours?
Click to expand...
Click to collapse
It doesn't matter, Verizon devices have locked bootloaders that can't be unlocked, don't waste your time trying, it isn't going to happen. Verizon devices have been this way for years now, I don't forsee that changing at any time in the future.
Droidriven said:
It doesn't matter, Verizon devices have locked bootloaders that can't be unlocked, don't waste your time trying, it isn't going to happen. Verizon devices have been this way for years now, I don't forsee that changing at any time in the future.
Click to expand...
Click to collapse
My device has the "oem unlock" button. Does that not matter? I was surprised as hell to find that.
Emmalfal said:
My device has the "oem unlock" button. Does that not matter? I was surprised as hell to find that.
Click to expand...
Click to collapse
You can try it but I'm pretty certain that Verizon has it locked down. There is a root method for Verizon S7 and S7 edge but no TWRP or custom ROMs that I know of.
Verizon S7 / S7 Edge [Root Guide] SM-G930V SM-G935V [NO KNOX TRIP]
Hi, I am compiling this guide for rooting the verizon variant. I also hope to fill in some gaps in the other guides. I AM NOT RESPONSIBLE FOR ANY PROBLEMS YOU MAY CAUSE OR ENCOUNTER I did not develop this, I'm only telling you how to do it...
forum.xda-developers.com
Droidriven said:
You can try it but I'm pretty certain that Verizon has it locked down. There is a root method for Verizon S7 and S7 edge but no TWRP or custom ROMs that I know of.
Verizon S7 / S7 Edge [Root Guide] SM-G930V SM-G935V [NO KNOX TRIP]
Hi, I am compiling this guide for rooting the verizon variant. I also hope to fill in some gaps in the other guides. I AM NOT RESPONSIBLE FOR ANY PROBLEMS YOU MAY CAUSE OR ENCOUNTER I did not develop this, I'm only telling you how to do it...
forum.xda-developers.com
Click to expand...
Click to collapse
Figured I'd give it the old college try. Got Odin to recognize the phone and went through the root process. All looked well until the very end. "Complete (write) operation failed."
Emmalfal said:
Figured I'd give it the old college try. Got Odin to recognize the phone and went through the root process. All looked well until the very end. "Complete (write) operation failed."
Click to expand...
Click to collapse
And now, using the latest version of Odin (I somehow downloaded an older one the first time around) it got to recovery.img and just stuck there. An exercise in frustration as you had warned. I need a Verizon phone that can 100 percent be rooted. I'm using a rooted original Pixel now but that sucker is getting worn out.
Emmalfal said:
Figured I'd give it the old college try. Got Odin to recognize the phone and went through the root process. All looked well until the very end. "Complete (write) operation failed."
Click to expand...
Click to collapse
It might depend on what version/build number of stock firmware is installed on the device. That guide might be for an older version of a specific version. If what you have is newer than what the guide was written for, that might be why it failed.
Does it say anything in the guide thread about it requiring a specific stock firmware or specific bootloader version?
Emmalfal said:
And now, using the latest version of Odin (I somehow downloaded an older one the first time around) it got to recovery.img and just stuck there. An exercise in frustration as you had warned. I need a Verizon phone that can 100 percent be rooted. I'm using a rooted original Pixel now but that sucker is getting worn out.
Click to expand...
Click to collapse
How about an unlocked device that can be used on Verizon's network?
Droidriven said:
It might depend on what version/build number of stock firmware is installed on the device. That guide might be for an older version of a specific version. If what you have is newer than what the guide was written for, that might be why it failed.
Does it say anything in the guide thread about it requiring a specific stock firmware or specific bootloader version?
Click to expand...
Click to collapse
I've gone through a couple different tutorials and they all seem to link to the same files that I need to download. It's been frustrating because looking for proper files for a phone this old leads to a lot of dead links. I'm probably going to give it up soon, but you know how it is. There's always "one more thing" to try. I tell you, I'm going to research like hell before I buy another phone. I need to know for sure that it can be rooted. In this case, I inherited my wife's old phone and a quick search revealed that it ought to be a piece of cake to root. There's always some little detail that trips me up. I appreciate your help with this.
Emmalfal said:
And now, using the latest version of Odin (I somehow downloaded an older one the first time around) it got to recovery.img and just stuck there. An exercise in frustration as you had warned. I need a Verizon phone that can 100 percent be rooted. I'm using a rooted original Pixel now but that sucker is getting worn out.
Click to expand...
Click to collapse
Try a version of Odin from around the same time the S7/S7 edge was released onto the market. Some versions work better with certain devices, as android evolved and as Odin gets updated to newer versions for newer devices, there are slight differences along the way that can effect how it works on older devices.
If the stock firmware that you are trying to flash is older than what was already installed on the device, it will probably fail due to not allowing the device to be degraded to an older version, it's a "security" measure put there to prevent you from installing a less "secure" operating system.
Droidriven said:
How about an unlocked device that can be used on Verizon's network?
Click to expand...
Click to collapse
Yeah, that would work. It's been so long since I messed around with this stuff -- I've had the pixel for six or seven years I think -- that I've forgotten everything I once knew.
Droidriven said:
Try a version of Odin from around the same time the S7/S7 edge was released onto the market. Some versions work better with certain devices, as android evolved and as Odin gets updated to newer versions for newer devices, there are slight differences along the way that can effect how it works on older devices.
If the stock firmware that you are trying to flash is older than what was already installed on the device, it will probably fail due to not allowing the device to be degraded to an older version, it's a "security" measure put there to prevent you from installing a less "secure" operating system.
Click to expand...
Click to collapse
I'll look that up and try it out. Nothing to lose at this point. All I'm trying to flash at this point is the CF Auto Root Tar.md5, as per the instructions.
Emmalfal said:
I've gone through a couple different tutorials and they all seem to link to the same files that I need to download. It's been frustrating because looking for proper files for a phone this old leads to a lot of dead links. I'm probably going to give it up soon, but you know how it is. There's always "one more thing" to try. I tell you, I'm going to research like hell before I buy another phone. I need to know for sure that it can be rooted. In this case, I inherited my wife's old phone and a quick search revealed that it ought to be a piece of cake to root. There's always some little detail that trips me up. I appreciate your help with this.
Click to expand...
Click to collapse
No, I mean does it say anything about it requiring a specific version of stock firmware or specific version of bootloader to be already installed on the device "before" you do the rooting process described in the guide?
Sometimes these kinds of things require your device to have a certain stock software version as a starting point before the device is modified. Most of the time, if the device is ever updated to a newer version, the specific exploit that was being used to root gets patched in the update, killing the effectiveness of the exploit used to root. From that point on, chances of rooting are nil.
Emmalfal said:
Yeah, that would work. It's been so long since I messed around with this stuff -- I've had the pixel for six or seven years I think -- that I've forgotten everything I once knew.
I'll look that up and try it out. Nothing to lose at this point. All I'm trying to flash at this point is the CF Auto Root Tar.md5, as per the instructions.
Click to expand...
Click to collapse
The vulnerability that CF autoroot takes advantage of may have been patched in newer versions of firmware.
I haven't been able to root any of my devices for last 4-5 years.
Droidriven said:
No, I mean does it say anything about it requiring a specific version of stock firmware or specific version of bootloader to be already installed on the device "before" you do the rooting process described in the guide?
Sometimes these kinds of things require your device to have a certain stock software version as a starting point before the device is modified. Most of the time, if the device is ever updated to a newer version, the specific exploit that was being used to root gets patched in the update, killing the effectiveness of the exploit used to root. From that point on, chances of rooting are nil.
Click to expand...
Click to collapse
Yeah, I've been careful to download files in keeping with my specific phone, not just the G930V but the longer version of that model number, which seems super specific. Nothing works. I've tried three or four different versions of Odin at this point, but they all either fail or get stuck somewhere in the process. Probably time to start searching for a new phone. I looked around for other ways to root this s7 but i'm not finding much. I rooted the PIxel with Magisk.
Emmalfal said:
Yeah, I've been careful to download files in keeping with my specific phone, not just the G930V but the longer version of that model number, which seems super specific. Nothing works. I've tried three or four different versions of Odin at this point, but they all either fail or get stuck somewhere in the process. Probably time to start searching for a new phone. I looked around for other ways to root this s7 but i'm not finding much. I rooted the PIxel with Magisk.
Click to expand...
Click to collapse
I'm not talking about model number version, I mean the specific build number of the firmware that is installed on the device. Some guides/methods only work on specific build numbers of stock firmware or only work if a specific version of bootloader is installed on the device.
Droidriven said:
I'm not talking about model number version, I mean the specific build number of the firmware that is installed on the device.
Click to expand...
Click to collapse
Ah. I'll check that.
Emmalfal said:
And now, using the latest version of Odin (I somehow downloaded an older one the first time around) it got to recovery.img and just stuck there. An exercise in frustration as you had warned. I need a Verizon phone that can 100 percent be rooted. I'm using a rooted original Pixel now but that sucker is getting worn out.
Click to expand...
Click to collapse
The S7 *can* be rooted, with lots of limitations afterwards. It just can't be BL unlocked
It could be failing due to the usb port or cable. I have an S8 that i can no longer flash only because I don't have a usb port in my pc old enough to flash it. I assume the S7 is the same way