FLASH AT YOUR OWN RISK
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this Patch before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. ALWAYS DO A BACKUP, BACKUP and LASTLY BACKUPS!
Click to expand...
Click to collapse
TWRP and Root for the Vernee Apollo Lite is finally here! Surprise, surprise! :laugh:
Disclaimer:
Tested with Vernee Apollo Lite OTA ''K15TB-A.A.vR1C.N1.160727'' from 27th July 2016.
Conditions:
- Download SPFlashTool
- Download Driver (If you use Windows 8.x or Windows 10 you have to deactivate the driver signature -> Tutorial)
- Download TWRP 3.2.1-0
- Download SuperSU
Install TWRP and Root:
1. Place SuperSU to internel storage
2. Shut down your phone
3. Extract Driver and run InstallDriver.exe
4. Extract SPFlashTool
5. Extract TWRP 3.2.1-0
6. Open SPFlashTool folder and run flash_tool.exe
7. Click on "Scatter -loading" and select the "MT6797_Android_scatter.txt" file
8. It should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: There must be only a checkmark at "recovery"
9. Click the green "Download" button on SPFlashTool
10. Connect your phone to your computer with an USB 2.0 port and wait until SPFlashTool shows "FINISH". Now TWRP should work, otherwise repeat steps 6-9
If you want Root:
11. Shut down your phone
12. Hold Volume(+) + Power Button for 5 seconds to come to mini recovery
13. Navigate with Volume(+) to "recovery" and confirm with Volume(-). Now you should be in TWRP main menu
14. Choose "Install Zip" and navigate to the SuperSU file on the internal storage and flash it
15. After successful flash, reboot your phone
Now you should have TWRP and Root installed! Good work!
Hello,
I successfully rooted my device using the above information.
Installed SuperSU is 2.76.
Is it save to update SuperSU to the last stable version 2.79?
Has anyone done that already? Via Google Play Store or direct via TWRP?
Thanks
I've did it on a custom rom and it works without any problems.
Sorry but on n.10 nothing happens to my phone. How do i connect my phone to pc?
jonajams said:
Sorry but on n.10 nothing happens to my phone. How do i connect my phone to pc?
Click to expand...
Click to collapse
You probably have to do it a few times until it works.
scatter file
how can i create my own scatter file for full rom backup ?
mtkdroid tool not support mt6797
jdodgers said:
how can i create my own scatter file for full rom backup ?
mtkdroid tool not support mt6797
Click to expand...
Click to collapse
I'm sorry but I can't help you with this question.
Is there something don't work wth this TWRP (aka ADB or something else)?
TNX
zorzgeo said:
Is there something don't work wth this TWRP (aka ADB or something else)?
TNX
Click to expand...
Click to collapse
ADB should work I never tested it. But it should because Sideload works too.
Only the battery percentage is not shown.
I'm so glad to hear that
Later today, or tonight, i will try it and do a report (phone is superb!)
TNX
Sent from my Apollo Lite using Tapatalk
One thing missing
Scatter file!!!
Here i am again
View attachment MT6797_Android_scatter.txt download for Vernee Apollo Lite
zorzgeo said:
One thing missing
Scatter file!!!
Click to expand...
Click to collapse
I will add scatter-file this evening.
For the others.
It would be nice!
GREAT JOB!
Thread updated with a few fixes!
USB OTG mounting not available...... running on a chromebook so can't use a flash tool but files (custom rom) are on chromebook.... any suggestions?
Douts
Hello, Do I have to put the phone in debug usb mode and unlock the bootloader to follow this manual?
pezmarino said:
Hello, Do I have to put the phone in debug usb mode and unlock the bootloader to follow this manual?
Click to expand...
Click to collapse
You should do. It's better.
I don't know why but on my phone it works even without that, but please do it.
Black Manta said:
You should do. It's better.
I don't know why but on my phone it works even without that, but please do it.
Click to expand...
Click to collapse
Thaks. It works fine.
UPDATE
Updated TWRP to it's newest version 3.2.1-0 for Android 8.1.
Black Manta said:
UPDATE
Updated TWRP to it's newest version 3.2.1-0 for Android 8.1.
Click to expand...
Click to collapse
Nope. It's still 3.1.0. Where's v.3.2.1.0 ??? Please fix.
Edit: Got it. Thanks.
https://www.android-hilfe.de/forum/...neageos-14-1.856832-page-5.html#post-10916168
Related
Want to install custom recovery and root to your brand new Ulefone Be Touch?
I bought mine from http://www.gearbest.com/cell-phones/pp_194400.html
I tried Kingroot, VRoot and this Be Pro recovery & root http://www.needrom.com/download/root...ipop-20150529/ but these didnt work for me.
So i unpacked that Be Pro recovery image and mixed it with Be Touch stock recovery image and repacked that. Also modified stock Be Touch boot.img.
Now we have working Carliv Touch Recovery (Thanks Carliv) and root in Be Touch.
This rar includes SP Flash Tool, drivers, boot.img, recovery.img and SuperSu installer which you have move to your sd card and install from custom recovery.
Instructions:
-Extract RAR
-Put UPDATE-SuperSu to your phones storage
-Install drivers to PC
-Open SP Flash Tool
-Check boot and recovery and select files from files-folder (Uncheck others if they are checked)
-Push download button
-Remove battery from the phone and connect USB
-Disconnect USB when SP Flash Tool says OK
-Install battery and start phone with vol up + power
-Select install zip from sdcard and select super su
-Reboot phone and you are done
-Click thanks if you are satisfied
UPDATE
Here is new boot.img and recovery.img for rom version "20150806" http://www.megafileupload.com/54gw/B...very082015.rar
Download link http://www.megafileupload.com/Pc9/ROOT_Be_Touch.rar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I'm guessing all we have to do is install the drivers, open the flash tool, point the recovery and boot image in there, flash then after install the root zip from internal/external card and all will be working?
I would say proceed as mentioned in the steps above. You are just repeating what has been mentioned above
Thank you for that 1st rooting technique.
Did you know if OTA updates are still working with it ?
Took 1 minute to root! Phantastic, thank you a lot for that easy description!
rvanbaud said:
I would say proceed as mentioned in the steps above. You are just repeating what has been mentioned above
Click to expand...
Click to collapse
The steps wasn't there before so it got updated after I asked.
)))))))) ah ok so I tested it and it worked. 1 minute to root the phone
Hi everyone
I tried to install the drivers, but after running the install.bat as administrator, i have "the system cannot find the path specified", someone can help me please ?
Same here with M$ Win 8.1.
Has someone got to manage to install the drivers yet? And how?
Yes, please watch on youtube "how to install MTK Preloader 65** driver correctly - windowss 8.1" works also for windows 7
hi OP! will this method work on a rebranded phone? our oem is ulefone be touch with 5.0 lollipop.
Yes
rvanbaud said:
Yes
Click to expand...
Click to collapse
Thanks!
Hi everyone! So hyped to inform you that I was able to root my phone. Thank you!
Yes, I got my BE TOUCH also rooted. I got some problem with driver installation in Win7, but solved finally. Thanks!
There is OTA update available. I can download data, but update not successful. Maybe was the reason that I got phone rooted?
Go here if you want back to stock http://ulefone.com/download/betouch.html.
Hi any custom roms that your using for our Ulefone Be Touch?
Pasi_K said:
Go here if you want back to stock http://ulefone.com/download/betouch.html.
Click to expand...
Click to collapse
Is there any problem to flash if phone got rooted already? Any improvements on this version Build 20150529? Does this root method still work after flashing this new rom?
Yes, It still works
just arrived my ulefone be touch 2 and i can't do the same process...
Pc doesn't recognize the device when is powered off... or better... is connected for 1 second then disconnect
Anyone can help me?
Hi now TWRP 3.0.2 its out for your Vernee Apollo Lite [WORKS]
special [email protected][email protected]
tested with latest original Vernee OTA K15TB-A.A.vR1C.N1.160727 (27.07.2016)
bugs: ADB not working. Same isue for ADB sideload and MTP too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Download this Files:
TWRP_302_for_Vernee_Apollo_Lite_P6.zip
UPDATE-SuperSU-v2.76-20160630161323.zip
01-driver-Pc_Windows.rar - If you are under Windows 8/10[FONT=Verdana, Arial, sans-serif, Tahoma] you need to disable signature verification of drivers ! HOWTO)
[/FONT]SP_Flash_Tool_5.1612.00.000_Windows.zip
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
1. copy UPDATE-SuperSU-v2.76-20160630161323.zip directly to internal or externeal SD Card.
2. In Phone goto Settings->About Phone->tab 5-7times on (Build number) to activate Developer Options.
3. goto Settings->Developer Options and activate (OEM Unlocking) and (USB debugging).
4. turn Phone completly off.
5. extract (01-driver-Pc_Windows.rar) on your Windows with (7zip) and install with (InstallDriver.exe).
6. extract (SP_Flash_Tool_5.1612.00.000_Windows.zip) on your Windows with (7zip).
7. extract (TWRP_302_for_Vernee_Apollo_Lite_P6.zip) on your Windows with (7zip).
8. open the folder (SP_Flash_Tool_5.1612.00.000_Windows)and run (flash_tool.exe).
9. in SP Flash Tool search the file scatter (MT6797_Android_scatter.txt) with the yellow button on the right (Scatter-loading) in the folder of extract TWRP.
10. Now SP Flash Tool must look like this with only marked at recovery:
11. now in SP Flash Tool press the green (DOWNLOAD) Button on the middle.
12. Plug your Usb Cable into Phone and wait until SP Flash Tool says FINISH! (plz use a USB2 Connector on your Pc!)
13. Now TRWP was flashed and ready to use if NOT, try Step 6-9 again.
14. turn Phone completly off.
15. hold Volume(+) and Power Button for ~5sec until you see the mini Apollo Lite Recovery Menu.
16. with Volume(+) chose RECOVERY Press Volume(-) for Ok.
17. Now you can see TWRP Main Menu Use Language English!!!
18. in TWRP goto (Install ZIP) then (Choose zip from SD Card) or search in (Choose zip from ExtraSD) for UPDATE-SuperSU-v2.76-20160630161323.zip and flash.
19. in TWRP go back and do REBOOT.
20. Now you have a working TWRP and ROOT
xx. If you want to install / flash Xposed and the amazing Dolby Atmos too, check my another HowTo
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Youtube Tutorial English:
https://www.youtube.com/watch?v=5XWoAniehhI
Youtube Tutorial Deutsch:
https://www.youtube.com/watch?v=VjZXw7Bs8jA
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
have fun regards ice
plz move to Vernee Apollo Lite section.
regards ice
Hey, can I use this with the Apollo X25?
Hello. I tried several times to install TWRP. I would like use superdragonpt nougat ROM but I can't do it without rooting my phone. Is there a way to do it with the latest OTA installed?
cant i just use ADB / fastboot to install TWRP? im on linux and im really not the biggest fan of tools like this..
scatter file
how can i create my own scatter file to backup stock rom first ?
mtk droid tool not support mt6797
Anyone gonna do 3.1.1 now?
#ApolloLiteProblems said:
Anyone gonna do 3.1.1 now?
Click to expand...
Click to collapse
Hopefully
Still got 3.0.2....want to go to 3.1 but don't know how without a pc......
Maybe I build TWRP 3.1.1 this week.
Black Manta said:
Maybe I build TWRP 3.1.1 this week.
Click to expand...
Click to collapse
Thanks!
#ApolloLiteProblems said:
Thanks!
Click to expand...
Click to collapse
There is already a new release
#ApolloLiteProblems said:
Thanks!
Click to expand...
Click to collapse
Check the FAQ from madOS. They released it!
Black Manta said:
Check the FAQ from madOS. They released it!
Click to expand...
Click to collapse
Is it for 3.1.1? I just flashed the 3.1 img so it should be fine. Success
---------- Post added at 11:13 AM ---------- Previous post was at 11:11 AM ----------
Black Manta said:
Check the FAQ from madOS. They released it!
Click to expand...
Click to collapse
Can't find the file
I can't unlock the boot loader
Hi, I can't unlock the boot loader. Could someone help me?
I just did it as op instructed.
Kernel version 3.18.22
built version 20170118194258
Many, many thanks
The only difference, I had to use ONLY usb3.
pezmarino said:
Hi, I can't unlock the boot loader. Could someone help me?
Click to expand...
Click to collapse
I didn't need to on mine.
Rooting Guide For Blackview E7
install twrp Recovery and Root Blackview E7,
Instructions-
twrp Installation-
Download sp tools, twrp, supersu, vcom Driver from Below
[*]install correct vcom Driver on PC
[*]Run Sp Flash Tools, Load Scatter from Recovery Folder
[*]Uncheck Everything and then Check Recovery only
[*]under Recovery Section Load Downloaded twrp 3.0xx.img
[*]then click on Download
[*]as soon as connect your Switched of phone to your pc via usb and wait for success, after complete, follow Below Instructions To Root,
Rooting Instructions-
flash latest supersu.zip via twrp
Done
Hit a Thanks :good:
Downloads-
twrp- https://drive.google.com/open?id=0B2FqGTbqHQMgY0gtN1dSd0hJbnM
Screen Shorts-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you move the download to another file host? Because the download is broken always showing ads but no download. Thanks in advance.
P.S Is the phone supposed to be in download mode or something? If so then how do we make it go in downloading mode?
02Victor said:
Can you move the download to another file host? Because the download is broken always showing ads but no download. Thanks in advance.
P.S Is the phone supposed to be in download mode or something? If so then how do we make it go in downloading mode?
Click to expand...
Click to collapse
Yep agreed nothing but spam so I've removed the link and closed the thread until the OP gives a proper download link
Regards
Sawdoctor
for root Blackview E7s
02Victor said:
Can you move the download to another file host? Because the download is broken always showing ads but no download. Thanks in advance.
P.S Is the phone supposed to be in download mode or something? If so then how do we make it go in downloading mode?
Click to expand...
Click to collapse
click here for twpr
hleo95itttps://mega.nz/90063544-6b9d-4da0-9901-27098c57b5fb (delete my nickname)
click here for SP Flash Tool
hleo95itttp://spflashtools.com/windows/sp-flash-tool-v5-1716 last version (delete my nickname)
later installation of twrp, for enter click volum + and power
100% working
leo95it said:
click here for twpr
hleo95itttps://mega.nz/90063544-6b9d-4da0-9901-27098c57b5fb (delete my nickname)
click here for SP Flash Tool
hleo95itttp://spflashtools.com/windows/sp-flash-tool-v5-1716 last version (delete my nickname)
later installation of twrp, for enter click volum + and power
100% working
Click to expand...
Click to collapse
Excuse me but the mega link you provided is kinda broken i think. After removing your name i get to the Mega homepage (while the key and address are still in the web address bar)
Are the files private or something?
Please help me or send me a pm
leo95it said:
click here for twpr
hleo95itttps://mega.nz/90063544-6b9d-4da0-9901-27098c57b5fb (delete my nickname)
click here for SP Flash Tool
hleo95itttp://spflashtools.com/windows/sp-flash-tool-v5-1716 last version (delete my nickname)
later installation of twrp, for enter click volum + and power
100% working
Click to expand...
Click to collapse
files doesn't work, can you move to another host please? and, can i root my blackview e7s with these files?
Leroya said:
files doesn't work, can you move to another host please? and, can i root my blackview e7s with these files?
Click to expand...
Click to collapse
I don't know. Because there is a specific scatter file for your particular model of phone.
Hey people i found a link to a Russian forum full with roms and thigs for our Blackview E7 check it out: http://4pda.ru/forum/lofiversion/index.php?t799594.html
Disclaimer: I don't know if any of these work because I haven't rooted my phone yet. Try these at your own risk.
PS: Can someone please explain to me how to get TWRP on the Blackview E7? I tried the latest flash tools and a recovery "meant" for my phone but no success. The green circle appears as tho it is flashed but nothing changed. Thank you in advance
Help My phone is Blackview E7
My cell phone is the Blackview e7s.... and I did not find his customized ROM so I can root, and I can not use the room of E7 because of the chip error or say it is for me to do recovery using the boot up
And version of my phone is MT6580
Milfaces said:
My cell phone is the Blackview e7s.... and I did not find his customized ROM so I can root, and I can not use the room of E7 because of the chip error or say it is for me to do recovery using the boot up
And version of my phone is MT6580
Click to expand...
Click to collapse
I am sorry but that is a different phone from the same company. There are other threads for how to root that phone. I can't help but suggested you google and find out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Downloads
Twrp
Force_non_encpryt or decrypt
HOW TO FLASH (fastboot method):
Code:
adb reboot bootloader
Code:
fastboot flash recovery [file name.img]
CREDITS:
TeamWin
Omni
Lineage
Note:
Force_non_encpryt or decrypt patch is updated for Nougat only. Asap will update to oreo to fix encryption on every reboot
Frequently asked questions (FAQ):-
Q: Is the recovery will work perfectly on Nougat & Oreo?
A: yus it will
Q: When the bugs will get fixed?
A: We are working to make it more stable, plz dont ask about ETAs
Q: Is this twrp has blank screen?
A: yus but it will wake up for power button ,no deep sleep
Q:What does Force_non_encpryt or decrypt will do?
A: It will remove encryption
Our Telegram Group : https://t.me/joinchat/Edv6LkYYChAC9OGIA6njjQ
We are doing bring up for Marino from scratch & if people who would like to help us can join this group
Thanks
Thanks ?
Will this work for OREO?
Nice Work.Thanks.
What are the bugs?
Anas Rahman said:
Will this work for OREO?
Click to expand...
Click to collapse
Bro it does work for oreo as stated in description
Is this "Force_non_encpryt or decrypt" file a boot image or a twrp image? I need this detail in order to flash it.
bro if i flash magisk zip will it root my phone have you tried it yet I'm afraid of trying it as i don't always have a pc. Please help
waiting for oreo decreption file and method
"Force_non_encpryt or decrypt patch is updated for Nougat only. Asap will update to oreo to fix encryption on every reboot "
, so have you guys updated any file for Oreo decryption ?? If yes then please show me the link..
Great work
So I have tried this and it's working perfectly.. by the way is there any way to disable encryption on K8 plus oreo? Please fix it..
Bro after flashing when i click on recovery mode no command window opens help
sagardhiman007 said:
Bro after flashing when i click on recovery mode no command window opens help
Click to expand...
Click to collapse
After flashing TWRP using flash recovery command, use this connect while still connected
fastboot oem reboot-recovery
If you boot into a black screen wait for 5 secs and then press power button once or twice
Bro can u give latest magisk zip file for k8plus
sagardhiman007 said:
Bro can u give latest magisk zip file for k8plus
Click to expand...
Click to collapse
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
how to install using SP Flash tool ?
mjakhar5 said:
how to install using SP Flash tool ?
Click to expand...
Click to collapse
Do you meam TWRP via SP Flash Tool?
It's better to do it with fastboot and I'm not sure if SP flash tool will even work however if you want to try, you could do this..
*I am assuming you know how to use SP flash tool and have proper drivers installed*
Get the scatter file for your firmware and then copy it to the folder in which you have your TWRP IMAGE stored. Now rename the twrp image to recovery.img.
Open SP Flash tool and then load your scatter file and let it load. Once done, uncheck everything except recovery partition and then click on download and then connect your phone with USB cable and let it flash. There should be a green tick if it finished correctly now try booting recovery mode by pressing power+vol. Up at the same time.
If the process was successful you should boot into TWRP now.
NOTE : I HAVE NOT TESTED THIS METHOD MYSELF AND CAN'T CONFIRM THAT IT WORKS OR NOT. IF YOU BRICK YOUR PHONE OR ANYTHING HAPPENS TO IT, I AM NOT RESPONSIBLE FOR IT. YOU AND ONLY YOU ARE RESPONSIBLE FOR YOUR ACTONS
While flashing Force non encrypt or decrypt file for nougat which option we have to select ..recovery or boot ..plz explain in details
How to unlock bootloader ??
[email protected] said:
How to unlock bootloader ??
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/general/root-unlock-bootloader-root-lenovo-k8-t3703559
how install Force_non_encpryt or decrypt.
Boot IMG or twrp
Please help me
durgarao39 said:
how install Force_non_encpryt or decrypt.
Boot IMG or twrp
Please help me
Click to expand...
Click to collapse
it's a boot.img, ONLY FOR NOUGAT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.4.0_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
DOWNLOADThanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
TWRP 3.5.x.x for m11
CLICK HERE
#reserved
I got this FAIL message when ever I tried
beki21 said:
View attachment 5311963I got this FAIL message when ever I tried
Click to expand...
Click to collapse
you are flashing wrong recovery, download from above link
need to download samsung usb drivers/adb and fastboot drivers/sdk-platform tools for that?or just follow your steps? .....please tell...hurry.....
HirukaNU15 said:
need to download samsung usb drivers/adb and fastboot drivers/sdk-platform tools for that?or just follow your steps? .....please tell...hurry.....
Click to expand...
Click to collapse
yes, you need samsung usb driver , if not installed
Sir my phone does not boot after flashing it
It remains in download mode (Samsung m11)
Please reply
Sir
Souvik10 said:
Sir my phone does not boot after flashing it
It remains in download mode (Samsung m11)
Click to expand...
Click to collapse
make a video and send me
Souvik10 said:
Sir my phone does not boot after flashing it
It remains in download mode (Samsung m11)
Click to expand...
Click to collapse
You probably did the wrong steps
Can i use it for M11 having Android 11 and oneui 3.1?
Please help
Hey.bro....thank you..! its working successfully!.....but when i going to flash a zip its saying invalid zip format...any solutions for it...?
4yush5663 said:
TWRP 3.5.x.x for m11
CLICK HERE
Click to expand...
Click to collapse
Sir plz provide samsung m11 custom rom
can i install twrp even if its updated to android 11
C
HirukaNU15 said:
Hey.bro....thank you..! its working successfully!.....but when i going to flash a zip its saying invalid zip format...any solutions for it...?
Click to expand...
Click to collapse
Just download magisk 24 apk then change the apk to zip when it will work
Did you unlock the bootloader? Pls answer
4yush5663 said:
make a video and send me
Click to expand...
Click to collapse
please my samsung m11 is always rebooting to twrp recovery instead of systems and they all passed
joeshua007 said:
please my samsung m11 is always rebooting to twrp recovery instead of systems and they all passed
Click to expand...
Click to collapse
you need to reboot to system from twrp recovery