Rooting Guide for Leagoo Z5 Lte-
your Waiting time Is now Finished Here is Root twrp For your Leagoo Z5 Lte,
Hit thanks :good:
Disclaimer-
Code:
Always create a nandroid backup
i am Not responsible for any Damage
Do Always on own Risk
twrp Installation-
in Short-
Download twrp Sp Flash tools from Bellow Link
Install All Drivers On PC and Run SP tools
Load Scatter File and Check Recovery only
under recovery Section Load Downloaded twrp.img File
Then Click on Download, Connect your Phone to PC [make Sure Phone IS turned off]
Done,
Fastboot Guide-
Bootloader Must be Unlocked,
Code:
fastboot flash recovery recovery name.img
Rooting Guide-
Download Supersu.zip from Bellow and put into Root Of Sd Card
Boot Device into twrp [use command adb reboot bootloader] or hold power and volume up key on switch of mod
Allow Modification
make a nandroid backup
Click install Zip from sd crad
Locate Downloaded Supersu.zip file and Swipe to install
after Success go back and reboot system now
Done,
Downloads-
MOD Edit :- Links Removed
z5 lte recovery
Hi , i maybe writing too late , but the rocovery you posted is gone, i need that file , can you share it with me someway?
Please.
Thread Closed.
Thanks
SacredDeviL666.
Related
HEY FOLKS,
This THREAD will GUIDE you to flash recovery.img from PHONE.
I found many of the people found difficult to flash recovery via FASTBOOT and TERMINAL EMULATOR by using CODES.
Here is a SIMPLE method to flash recovery from phone through app.
STEPS:
1) Download recovery flasher utility.apk
download link
2) install the recovery flasher utility.apk file.
3) download your preferred recovery.img
4) copy the downloaded recovery.img file to sd-card and place it in ROOT of your sd-card (Don't keep the file inside any folder because the app may not recognize the file)
5) rename the downloaded recovery.img file as recovery.img(all in lower case)
6) Open the app and flash the recovery by pressing the "install recovery" button (Please be patient, wait for the complete flash, wait till you get the display "reboot into recovery")
7) done!!! :good: enjoy your new recovery.:victory:
(note: this method worked very well for me, app flashed recovery within 2sec, and i am not responsible if it wont work for you or anything is messed up.)
:victory: hit :good: if this guide was helpful. :highfive:
.apk to flash recovery
Is there any way to find the success of flashing ?
cvpillai said:
Is there any way to find the success of flashing ?
Click to expand...
Click to collapse
yes mate, after flashing through app, the app will show reboot into recovery. after that just boot into recovery(manually).
hit thanks if i helped :highfive:
does it work on all rooted mobiles
aashking said:
HEY FOLKS,
This THREAD will GUIDE you to flash recovery.img from PHONE.
I found many of the people found difficult to flash recovery via FASTBOOT and TERMINAL EMULATOR by using CODES.
Here is a SIMPLE method to flash recovery from phone through app.
STEPS:
1) Download recovery flasher utility.apk
download link
2) install the recovery flasher utility.apk file.
3) download your preferred recovery.img
4) copy the downloaded recovery.img file to sd-card and place it in ROOT of your sd-card (Don't keep the file inside any folder because the app may not recognize the file)
5) rename the downloaded recovery.img file as recovery.img(all in lower case)
6) Open the app and flash the recovery by pressing the "install recovery" button (Please be patient, wait for the complete flash, wait till you get the display "reboot into recovery")
7) done!!! :good: enjoy your new recovery.:victory:
(note: this method worked very well for me, app flashed recovery within 2sec, and i am not responsible if it wont work for you or anything is messed up.)
:victory: hit :good: if this guide was helpful. :highfive:
Click to expand...
Click to collapse
abhi1607 said:
Click to expand...
Click to collapse
Hopefully it should work in all rooted devices
Hit thanks if i helped :good:
Hi XDA
This Is My First Thread Regarding Rooting And Installing CWM Recovery On Lava Iris Pro 30. CWM Recovery was Created With The Help Of Mtk Droid Tool By Me.
Let Start The Tutorial
Procedure:-
1.Download "Framaroot"
2.Install it in your Iris Pro 30 ( note some antiviruses might give warning while downloading)
3.Click on "Boromir" and wait for a minute.
4.After you get the success message, restart the device
5.You should be able to see SuperSU in app launcher
6.Thats it, you have rooted your Lava Iris Pro 30 .
2) Updating Recovery
Download the recovery.img file from the attachments below.
Place the recovery.img file in your sd card
Open MobileUncleTools Application
Grant superuser permission
Click on Recovery Update
it will show you recovery.img file you placed in sd card
Select that recovery
click ok.
It will ask to reboot into recovery mode. click yes to verify the update.from their you can reboot system again.
CAUTION/WARNINGS:
Once you root your device.you VOID YOUR WARRANTY.I am NOT RESPONSIBLE for anything
Always have BACKUP before installing any ROM....just in case any problem occurs while flashing rom
If You BRICK your phone during any of these process.
I AM NOT RESPONSIBLE.
FLASH AT YOUR OWN RISK
Thank You..... !!! Comment if You Have Any Doubts...!!
LIKE IF TUTORIAL HELPED. :good:
Procedure to get a proper root for infocus m350 after lollipop update .
downloads:
1)supersu.zip file .ttps://download.chainfire.eu/396/supersu/
2)infocus m350 both version files .ttps://drive.google.com/folderview?id=0B5oSETod7x-NaHUxNnVFbnNWNEk&usp=sharing
3)adb and fastboot files.
procedure:
1)open your adb and fastboot files folder in pc .now copy all the infocus .img files to that adb and fastboot folder .
2)copy that supersu.zip file to your mobile internal or ext.sdcard.
3)connect your mobile to pc and press volume down and power button until you get into fastboot .
4)open cmd in adb and fastboot folder and type these commands simultaneously.
5)fastboot flash boot kitkatboot.img
fastboot boot kitkatrecovery.img
6)you will get into a custom recovery .
press install zip from sd card .
choose sd card and choose your supersu.zip file and install it.
now you have successfully installed the recovery file .
********its time to flash the lollipop boot.img file *********(very important )
7)hit reboot option after installing the supersu.zip file . again press the volume down and power button ,go to fastboot . type in cmd.
fastboot flash boot lolliboot.img
fastboot reboot .
**********(step7 is very important to get boot into phone)************
thats it guys .
any problem in this .you can ask me . ill help you .
(downloads didnot work because xda is not allowing me to post links because i am new to xda devs.just place "h" infront of all downloads)
rajkumarukkuturi said:
Procedure to get a proper root for infocus m350 after lollipop update .
downloads:
1)supersu.zip file .ttps://download.chainfire.eu/396/supersu/
2)infocus m350 both version files .ttps://drive.google.com/folderview?id=0B5oSETod7x-NaHUxNnVFbnNWNEk&usp=sharing
3)adb and fastboot files.
procedure:
1)open your adb and fastboot files folder in pc .now copy all the infocus .img files to that adb and fastboot folder .
2)copy that supersu.zip file to your mobile internal or ext.sdcard.
3)connect your mobile to pc and press volume down and power button until you get into fastboot .
4)open cmd in adb and fastboot folder and type these commands simultaneously.
5)fastboot flash boot kitkatboot.img
fastboot boot kitkatrecovery.img
6)you will get into a custom recovery .
press install zip from sd card .
choose sd card and choose your supersu.zip file and install it.
now you have successfully installed the recovery file .
********its time to flash the lollipop boot.img file *********(very important )
7)hit reboot option after installing the supersu.zip file . again press the volume down and power button ,go to fastboot . type in cmd.
fastboot flash boot lolliboot.img
fastboot reboot .
**********(step7 is very important to get boot into phone)************
thats it guys .
any problem in this .you can ask me . ill help you .
(downloads didnot work because xda is not allowing me to post links because i am new to xda devs.just place "h" infront of all downloads)
Click to expand...
Click to collapse
Hi,
XDA Assist is not really the correct place for this type of thread.
Try posting it here:
http://forum.xda-developers.com/android/general
Good luck!
PHONE SPECIFICATIONS :
MODEL: LAVA V23GB
KERNEL VERSION : 3.18.19
ANDROID 6.0
STAR OS
MT 6735M
The rooting method is for the phone with above specifications
ROOTING METHOD
1)FLASHING TWRP
2)FLASH SUPERSU
TWRP FLASHING:
LAVA V23GB is a very good phone and has very good configuration but it is less popular and less used by developers because of other similar models like lava pixel v2 2gb and lava pixel v2 3gb.
So I made the twrp myself.
Inorder to flash twrp u have to install spflash tool in your pc
After installing spflash tool run flash_tool.exe select scatter file and tick on recovery (download link for twrp and scatter file below)
Then keep download only and click download button and connect your phone to pc
The flashing process will start automatically
After flashing twrp dont power on your phone. Just disconnect the usb and enter into recovery mode by clicking power + volume button and select recovery mode (If u simply power on your stock recovery would replace twrp so dont directly power on)
Now u will enter into recovery mode
Thats it u flashed twrp
2)flashing Supersu :
Download the supersu zip file and copy it to sd card
Then go to recovery mode into twrp
Click install and select storage and select sd card then select the supersu.zip file and swipe to flash
Clear cache/dalvik cache
Then reboot your phone
Your phone will be rooted. you can check using root checker app
Download links :
Twrp and Scatter file :https:// drive .google .com/ open?id=0B_Ic1h9dY4J8VVNtWDB1dmt2UDQ (remove spaces )
Supersu : https:// drive.google.com/ open?id=0B_Ic1h9dY4J8WWRGN0k5dUZ4aVE
Twrp made by Azizur Rehman Shikdhar
Ported by Mudunuri Sriram (me)
Porting guide by Keng Natan Singse and Utkarsh
My contact details
fb.com/ mudunurisriram
phone no:8106357947
thanx a lot man..
please make scatter file and twrp for lava x81 also i will be very thankful of you
send the stock recovery
GAGAN MALLI said:
please make scatter file and twrp for lava x81 also i will be very thankful of you
Click to expand...
Click to collapse
send the stock recovery
Hello everyone,
This is very simple guide to root your Oneplus 6 device if you are on latest OOS update 5.1.9
People who were already rooted may find some problems after updating their devices so following this guide will let you root and install magisk and xposed in a easy wand and easy language.
ROOTING
skip to 4th step if u have bootloader unlocked and installed fastboot and download twrp
1 First Download the and install fastboot cmd line tools . you can seach over other fours for that . or I will update it in some time.
2 Download twrp recovery from twrp website by selecting your device as oneplus 6. you need to download two files one is zip file (needed to be flashed when we boot to twrp for the first time and second the main recovery image file .
3 Now make sure your bootloader is unlocked or find some guide to make your bootloader to be unlocked.
4 Now you are ready u have all the pre required things . Now goto device and boot it to bootloader . this can be done holding volume down and power together or from advanced reboot options. - Just download the twrp zip file to the root of the phone directory.
5 Now connect you device to the PC and open CMD . Goto the the place where the downloaded twrp img files is placed .
6 Now put the command
Code:
fastboot boot filename[twrp].img
7 Now your device will reboot to twrp and u just install the zip file from the root directory.
8 that's it your device is rooted.
Magisk
1. Download Magisk zip from the website ( available as method 2)
2. boot into twrp (recovery ) then install Magisk.
Xposed
1. Now open magisk update it if it asks.
2. fo to downloads and download xposed framework .and reboot.
Wow thanks for all the links , now I do not have to scour the internet for hours searching for the correct versions........