CM14.1 bootloops, AOSP 7.1 doesn't - ONE Q&A, Help & Troubleshooting

I ran into a bit of a problem recently. My phone suddenly froze, and didn't want to wake. This happens occasionally, so I did what I always do: hard reboot the phone. Hard rebooting resulted in a bootloop, I got stuck in the bootanimation. So at this point, I figured wiping the phone and reflashing would do the trick. Guess what? It didn't. I thought this was a bit odd, so I started to (clean) reflash earlier builds of TugaPower, but nothing seemed to help; every build resulted in a bootloop, except for TugaPower N5. So I decided to just run N5, new N8 build was released though, so I tried flashing that build, still stuck in bootloop.
At this point I lost all hope in TugaPower and decided to flash the official CM14.1 build; no dice, resulted in a bootloop. At this point I tried resetting everything, wiping my complete phone, but nothing helped. Then I tried flashing kwoktopus/updateing AOSP build, which did boot fine! I really want to run CM14.1/TugaPower though, but my phone just refuses to boot on both. Any ideas?
It is worth noting that I've tried almost everything (in TWRP) recovery at this point. From formatting system all the way to running adb to fix the persist partition. Nothing seemed to help. CM14.1 builds don't boot, but AOSP boots fine. WHAT IS WRONG WITH ME? MY PHONE?
Useful info about the phone:
I'm not running multirom;
I am using latest TWRP recovery;
I wasn't deliberately using F2FS or EXT4 memory, partition, whatever (I didn't know what they both did)
TugaPower N5 build ran fine, after that build everything bootlooped
CM13 boots, CM14.1 bootloops
Kwoktopus/updateing AOSP 7.1 build boots fine

Try checking if your /cache partition is formatted to f2fs, it sometimes automatically does that

f41lbl0g said:
Try checking if your /cache partition is formatted to f2fs, it sometimes automatically does that
Click to expand...
Click to collapse
It wasn't, it was in EXT4 format...

Which gapps?

giaur said:
Which gapps?
Click to expand...
Click to collapse
Open Gapps Pico, 7.1 of course. But I quit flashing it after a while, figured I'd keep that out of the equation when I was triangulating the source of what caused the bootloop. It definitely isn't because of Gapps.

Maybe you need to flash a different firmware?

Thepromodder said:
Maybe you need to flash a different firmware?
Click to expand...
Click to collapse
How would I need to do that? I (re)flashed the latest firmware for the TugaPower rom, but I figured that flashing a (new) firmware for the CM14.1 builds wasn't necessary.

Managed to fix it using this link: http://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061
I don't know what causes this to happen, but now you guys know how to fix it.

Related

[Q] - No Calls or SMS OxygenOS or CM12

OK I am having a problem, when i rooted and followed the direction to install both OxygenOS or CM12 nightly I am unable to receive any SMS or phone calls except after a reboot. Once i reboot any saved messages come through and then once the phone sleeps it stops. I have rolled back to CM11S for the time being. Any steps or tricks to follow to get this issue resolved.
"followed the direction to install both OxygenOS or CM12 nightly" does it mean you are using Multiboot?
abhibnl said:
"followed the direction to install both OxygenOS or CM12 nightly" does it mean you are using Multiboot?
Click to expand...
Click to collapse
No just flashing either one I have this result. Not sure if I am doing something wrong in the process.
Steps:
Wipe all but internal
Flash Rom (then gapps if CM12)
Flash SU
Reboot
pkp190 said:
No just flashing either one I have this result. Not sure if I am doing something wrong in the process.
Steps:
Wipe all but internal
Flash Rom (then gapps if CM12)
Flash SU
Reboot
Click to expand...
Click to collapse
Well all i could suggest it, also please flash the CM12 firmware once. In theory oxygenOS and CM12 firmwares are compatible. So flash like this:
Install CM12 fimrware zip
Wipe System, Data, Cache, Dalvik etc without Internal memory
Flash Rom Zip
Flash Gapps
Flash SuperSu
and then let it boot and settle down. Before restorign apps or data, check for any issues again
seems to be sitting stable at the moment, will keep testing. but thanks for the input.
pkp190 said:
seems to be sitting stable at the moment, will keep testing. but thanks for the input.
Click to expand...
Click to collapse
Great! Let me know if the bug persists. And be careful with firmwares. For CM12 roms, just flash the firmware once and you're good to go for all of then.
abhibnl said:
Great! Let me know if the bug persists. And be careful with firmwares. For CM12 roms, just flash the firmware once and you're good to go for all of then.
Click to expand...
Click to collapse
spoke too soon, after letting the phone sit ideal for a few hours and testing incoming calls\sms nothing came through. restored a backup of CM11S, for the week to have a working device. will keep trying to get to a root cause later in the week. will also open a help ticket with OnePlus to see if there is something I am missing as well since this happens with OxygenOS as well.

Soft brick downgrade CM12.1 to KitKat

Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
I_HAVE_NO_IDEA said:
Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
Click to expand...
Click to collapse
Well if you can boot into the recovery and if its custom (TWRP) wipe all the data on your phone. Second I would try to flash a ROM onto your device such as Resurrection Remix and see if that works. Update on your progress.
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
I_HAVE_NO_IDEA said:
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
Click to expand...
Click to collapse
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
vtails said:
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
Click to expand...
Click to collapse
Thank you. But I can't flash a cm12.1 atm (see my post below). I can only flash through fastboot. I'm not sure I properly understood you, what do you call 4 22 ?
FYI I managed to boot again. Here's what I did:
Flash a 5.x ROM, try to boot to let the system make partitions and stuff (I think)
Boot in TWRP and saw that system and cache were not mountable, so I wiped them.
Flash a cm12.1 (+ Gapps) and here we go!
Thank you for your help!

Cyanogen Mod 6.0 for OPPO R7 PLUS

I apologize if this is posted, but we now have an official build of Marshmallow for our Oppo r7 Plus (F) Variant. link attachedhttp://download.cyanogenmod.org/?type=nightly&device=r7plus
Excellent! I am going to test it right now and will report!!!!
Update: I was on ColorOS, flashed cm13 recovery and done factory reset, formatting cache is taking around 8 minutes, is that normal?
Flashing ARM64 opengapps for 6.0 end up with error: E:Installation error in /sideload/package.zip (Status 255) - seems like recovery problem as many people report this issue. I only dont know if TWRP will work with CM13 rom
Personally I'm using a 12.1 recovery at the moment. The 13.0 recovery is still WIP AFAIK.
Gesendet von meinem R7plusf mit Tapatalk
Ok, will try cm12.1 recovery, what about gapps? Which one to use? Btw I have done factory reset again, flashed cm13 rom only, phone rebooted and loading apps (total of 87 I think), then done reboot, then only showing blue android logo for very long time, like 10 minutes followed with another "starting apps" screen with 21 left or so, now another reboot with blue android logo. Is this normal for MM roms? Still not finished.
EDIT: after another 5 minutes same screen appears with saying starting android... 21 apps left, blue android logo when done - seems to be as bootloop as it is going nowhere from here.
CM13 rom flashed fine over TWRP, flashing gaaps now seems to be alright as well (open_gapps-arm64-6.0-mini-20151218).
Very exited, good job
so far I am getting the boot-loop also. will wait to here what Nexus5-32GB will post (if any success with the cyanogen recovery) before reverting back
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Nexus5-32GB said:
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Click to expand...
Click to collapse
check out my post after this (well before now)
coled3 said:
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Click to expand...
Click to collapse
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Nexus5-32GB said:
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Click to expand...
Click to collapse
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
coled3 said:
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
Click to expand...
Click to collapse
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Nexus5-32GB said:
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Click to expand...
Click to collapse
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
coled3 said:
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
Click to expand...
Click to collapse
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
coled3 said:
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
Click to expand...
Click to collapse
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Nexus5-32GB said:
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Click to expand...
Click to collapse
Well, I took my 12.1 installation without any wipe, went to CM recovery from 12.1, installed my (self compiled at that time) build + opengapps (it's important to install those before booting M for the first time), booted, done. I don't have any /system mods though.
I guess I'll try the nightly and see what happens there. Did anybody of you get a logcat of the failed boot attempts?
Gesendet von meinem R7plusf mit Tapatalk
unni84kollam said:
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Click to expand...
Click to collapse
Just follow this quide with flashing twrp, only instead of twrp flash the stock recovery image. http://forum.xda-developers.com/showpost.php?p=63189590&postcount=5 Sorry, there is only boot command, you should type "fastboot flash recovery stock.recovery.img" - when "stock.recovery.img" is a filename of your stock recovery downloaded on your computer.
No need for wipe when installing recovery. I recon to install stock recovery and then install stock ColorOS from it, let it boot, install twrp later and do what you want then.
Looks like it's broken for everyone. I tried multiple recoverys, full wipes including /system and no joy. Guess we'll just have to wait!

OnePlus One - Won't boot RR , boot loop happens

Hi!
A while back I had some issues with the phone, it was when I was supposed to boot it, it always took 2 tries. It always got stuck, then had to long press the lock key to hard reboot it, then it worked fine. This prevented me from doing a factory reset (in hope to fix (what I later found out was) a media rescan etc). Tried to root it, something happened and it wouldn't boot anymore. Yiti yata and the phone wouldn't boot. Finally I got it back to life with some guide on here and I used whatever 4.4.4 I downloaded.
The software wouldn't find any "normal" update phone updates, so I figured I would try Resurrection Remix 7.1.x (.2 I think it was). At first I got just that it failed with some 2.x twrp version. Updated to TWRP 3.1.x.x (3.1.1.0 if I guess). Now I got to know that it was a TZ error (ERROR 7) from TWRP. This happened to my "RR-N-v5.8.3-20170718-bacon-Official.zip" file. I managed to get around it by doing this: https://forum.xda-developers.com/showthread.php?t=2522762. So I could get this installed, sort of I think. The problem now was that it would show the very first oneplus boot screen for around 20 ish seconds, before it would reboot in a boot loop.
So I tried to install some other CM Lineage Os nightly thing (they said install that and then RR), but that didn't work either. This post was the one I donwloaded from (install this first, then RR should work).
I tried doing this both on TWRP 2.8.6.0 and 3.1.1.0 since I saw some post about the modem not being right from versions newer than 2.8.6.0.
Looking around a bit more I saw in some post someone talking about firmware..? Does this matter anything, also how is this different from the recovery or ROM? (new to this stuff)
In short, last working version of Android I had on there was 4.4.4 (think I followed this post). Using a Mac currently and have no problem with flashing, entering fastboot or recovery.
My procedure when I tried to install RR was:
Install the TWRP 3.1.1.0 or 2.8.6.0 (since I did it several times).
Wipe everything (Have nothing of value on the phone) cache, system, internal storage, dalvik and data. Also did a factory reset (from TWRP) before if that matters.
Copied RR and Gapps 7.1 ARM (not arm64) over.
Installed RR, wiped cache/dalvik. (or linear/cm (post above^^) when I tried that)
Installed Gapps, wiped cache/dalvik.
Boot loop.
Also tried with/without emptying cache/dalvik also chose to install both zips at once.
So can anyone clue in how I can proceed to get RR 7.1 onto my OPO? Any help is very much appreciated
I'm sorry if this wasn't the best post. Have an immense headache at the moment
wahlmat said:
Hi!
A while back I had some issues with the phone, it was when I was supposed to boot it, it always took 2 tries. It always got stuck, then had to long press the lock key to hard reboot it, then it worked fine. This prevented me from doing a factory reset (in hope to fix (what I later found out was) a media rescan etc). Tried to root it, something happened and it wouldn't boot anymore. Yiti yata and the phone wouldn't boot. Finally I got it back to life with some guide on here and I used whatever 4.4.4 I downloaded.
The software wouldn't find any "normal" update phone updates, so I figured I would try Resurrection Remix 7.1.x (.2 I think it was). At first I got just that it failed with some 2.x twrp version. Updated to TWRP 3.1.x.x (3.1.1.0 if I guess). Now I got to know that it was a TZ error (ERROR 7) from TWRP. This happened to my "RR-N-v5.8.3-20170718-bacon-Official.zip" file. I managed to get around it by doing this: https://forum.xda-developers.com/showthread.php?t=2522762. So I could get this installed, sort of I think. The problem now was that it would show the very first oneplus boot screen for around 20 ish seconds, before it would reboot in a boot loop.
So I tried to install some other CM Lineage Os nightly thing (they said install that and then RR), but that didn't work either. This post was the one I donwloaded from (install this first, then RR should work).
I tried doing this both on TWRP 2.8.6.0 and 3.1.1.0 since I saw some post about the modem not being right from versions newer than 2.8.6.0.
Looking around a bit more I saw in some post someone talking about firmware..? Does this matter anything, also how is this different from the recovery or ROM? (new to this stuff)
In short, last working version of Android I had on there was 4.4.4 (think I followed this post). Using a Mac currently and have no problem with flashing, entering fastboot or recovery.
My procedure when I tried to install RR was:
Install the TWRP 3.1.1.0 or 2.8.6.0 (since I did it several times).
Wipe everything (Have nothing of value on the phone) cache, system, internal storage, dalvik and data. Also did a factory reset (from TWRP) before if that matters.
Copied RR and Gapps 7.1 ARM (not arm64) over.
Installed RR, wiped cache/dalvik. (or linear/cm (post above^^) when I tried that)
Installed Gapps, wiped cache/dalvik.
Boot loop.
Also tried with/without emptying cache/dalvik also chose to install both zips at once.
So can anyone clue in how I can proceed to get RR 7.1 onto my OPO? Any help is very much appreciated
I'm sorry if this wasn't the best post. Have an immense headache at the moment
Click to expand...
Click to collapse
Calm down.
You're right about that firmware thing,that is the one causing issue when you're trying to flash RR 5.8.3 over KitKat.
This is because the firmware that kitkat comes with,is old and don't support newer android versions,that's because it is made for KitKat only.
Always use latest Twrp(https://dl.twrp.me/bacon/).
Make sure you don't edit any zip like what you did with the Rom zip earlier(devs don't post non-working zips),I'm sure you've a backup of your non-edited zip,if not,re-download the zip.
Now boot into latest twrp,wipe everything except internal storage.
Firmware: https://drive.google.com/file/d/0BxysuRdzsJeWeW9JbTNwaUJKb1E/view?usp=drivesdk
Flash the above zip,then without wiping anything flash rom zip(unedited) then flash google apps package(opengapps.org)(optional).
Reboot.It should boot fine now.
Good luck!
Mr.Ak said:
Calm down.
You're right about that firmware thing,that is the one causing issue when you're trying to flash RR 5.8.3 over KitKat.
This is because the firmware that kitkat comes with,is old and don't support newer android versions,that's because it is made for KitKat only.
Always use latest Twrp(Can't post links withing 10 posts apparently...).
Make sure you don't edit any zip like what you did with the Rom zip earlier(devs don't post non-working zips),I'm sure you've a backup of your non-edited zip,if not,re-download the zip.
Now boot into latest twrp,wipe everything except internal storage.
Firmware:
Flash the above zip,then without wiping anything flash rom zip(unedited) then flash google apps package(Can't post links withing 10 posts apparently...)(optional).
Reboot.It should boot fine now.
Good luck!
Click to expand...
Click to collapse
Thank you so much! Got it working on 1st try with what you provided! Seems like the firmware thing was the bad guy in this scenario. A little interest, what specifically is the firmware in this case? Either way, rocking RR now and I'm really grateful
wahlmat said:
Thank you so much! Got it working on 1st try with what you provided! Seems like the firmware thing was the bad guy in this scenario. A little interest, what specifically is the firmware in this case? Either way, rocking RR now and I'm really grateful
Click to expand...
Click to collapse
I'm glad you got it up and running.
Here are some FAQs:
What is a Firmware? What is Modem?
- Firmware is the whole package of proprietary partitions of your device, modem itself is a NON-HLOS file responsible for your device's communications over Wi-Fi, Mobile Networks and other such stuff.
So what is the difference between firmware and ROM then?
- Firmware is the responsible partition for IMEIs, the modemst partitions hold your IMEI, persist holds your Mac addresses etc.
ROM is only a combination​ of system.img and boot.img (kernel)
What to restore if I loose my IMEI?
- Both the modemst partitions (IMP: considering you took a backup of them before)
What is the default firmware? (default= firmware which comes with the latest CM/ LineageOS 14.1 weeklies)
- c6-00241
Thanks a lot, once again
Help!
I'm not sure of all the specifics on my oneplus one but I accidentally updated the wrong update from my nightly bacon.. it now is stuck in Boot Loop I can get to the fastboot screen (it gets stuck there too) and I can get to the recovery, etc (but it is not the usual screen with all the folders (it was rooted).. it is now just four options in Cyanogenmod recovery.. none work. I do not want to lose my data :crying: .. Sadly my techy is not available to save me! Please help this untechy Cali Girl! I've googled and researched and its still like a foreign language.. Thank you!!
HisMuse said:
I'm not sure of all the specifics on my oneplus one but I accidentally updated the wrong update from my nightly bacon.. it now is stuck in Boot Loop I can get to the fastboot screen (it gets stuck there too) and I can get to the recovery, etc (but it is not the usual screen with all the folders (it was rooted).. it is now just four options in Cyanogenmod recovery.. none work. I do not want to lose my data :crying: .. Sadly my techy is not available to save me! Please help this untechy Cali Girl! I've googled and researched and its still like a foreign language.. Thank you!!
Click to expand...
Click to collapse
I am not 100% sure, but I would say, boot into fastboot, flash something like TWRP recovery, then you will be able to access the device files from the recovery. Just reflashing the boot shouldn't mess up anything as far as I am concerned. After that (when you've grabbed all the files you want), flash the newest firmware the guy linked above and install your latest 7.0 ROM
wahlmat said:
I am not 100% sure, but I would say, boot into fastboot, flash something like TWRP recovery, then you will be able to access the device files from the recovery. Just reflashing the boot shouldn't mess up anything as far as I am concerned. After that (when you've grabbed all the files you want), flash the newest firmware the guy linked above and install your latest 7.0 ROM
Click to expand...
Click to collapse
I can get phone to fastboot but it just stays on the screen that says fastboot.. do I need a computer?
HisMuse said:
I can get phone to fastboot but it just stays on the screen that says fastboot.. do I need a computer?
Click to expand...
Click to collapse
Yes you do. You need that + some software. Check out some "install custom recovery oneplus one" guides, you should be able to find something. Are you on Mac or Windows?
Yes I'm on Windows 10.. I tried removing battery overnight as well .. its not boiling hot anymore but still stuck in bootloop.
HisMuse said:
Yes I'm on Windows 10.. I tried removing battery overnight as well .. its not boiling hot anymore but still stuck in bootloop.
Click to expand...
Click to collapse
Download the Samsung ADB driver or whatever it was called, then flash a new recovery for it. There are multiple guides for doing that. After that you should be able to transfer your files to your pc while being in recovery mode

Black Screen Blue LED

I just unlocked my boootloader today after waiting the 14 days. First thing I did was install twrp recovery, had no problem there. Then I downloaded unofficial lineage os 14 rom, and the newest open gapps.
I was able to fastboot boot into twrp recovery, I then wiped dalvik, system, data, and cache. then proceeded to install lineage os rom, no problem, when I tried to install gapps, it just hung on detecting device and rom. which I had to reboot. then it came up to black screen with blue led. again I rebooted into twrp recovery, wiped again, and this time just installed lineage os rom, and reboot,same thing black screen with blue led. did I miss a step somewhere?
If you were on stock mm or below s244 stock then it's normal to see this..
Sent from my Lenovo P2 using Tapatalk
FireLord said:
If you were on stock mm or below s244 stock then it's normal to see this..
Click to expand...
Click to collapse
+1
Install s244 firmware and then install los.
In trying to fix my own problem I may have screwed it up more. I changed the file system of the Systema nd Data partitions. I changed it to EXT4, however that did not help. I would like to change them back to whatever they were before, but I dont know what they were before, can anyone help me?
actionxp said:
In trying to fix my own problem I may have screwed it up more. I changed the file system of the Systema nd Data partitions. I changed it to EXT4, however that did not help. I would like to change them back to whatever they were before, but I dont know what they were before, can anyone help me?
Click to expand...
Click to collapse
Stock is f2fs, if I'm not wrong
I have this same issue but it solved , i change my data partition to ext4 and also changed another partition to ext4 i didnot remember which partition is that, i think it is system partition (not sure)
actionxp said:
In trying to fix my own problem I may have screwed it up more. I changed the file system of the Systema nd Data partitions. I changed it to EXT4, however that did not help. I would like to change them back to whatever they were before, but I dont know what they were before, can anyone help me?
Click to expand...
Click to collapse
Don't messup with system partition plax..
I had the same issue. Try an other Gapps pack. I picked a smaler one and it worked.
Yes it was that easy
So i installed the S244 Firmware, installed twrp and even got stock rom+magisk root to work. I passed safetynet test. But i can't flash custom roms+gapps. It freezes in twrp.
I already tried alls opengapps versions, from pico until micro. None of them worked. My system partition is ext4, same as data.
My twrp version is 3.1.1-1

Categories

Resources