First I unlocked the bootloader, and then I tried to use chainfire's root method by flashing the boot-to-root-img through fastboot. The phone will no longer boot to system and I cant seem to get google's factory image to install via fastboot. The flash-all would only flash the bootloader and radio, but would fail after that. I also cannot manually flash the stock system.img file. I get an error that reads " remote: data too large ". Not sure how to get out of this so any help would be GREATLY appreciated.
Did you manually flash the boot and system.img to each slot?
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Fastboot flash system_a system.img
fastboot flash system_b system_other.img
Use these commands assuming your boot slot is slot_a...if your boot slot is slot_b then use
Fastboot flash system_a system_other.img
fastboot flash system_b system.img
Hope this helps!!!
You need to update your fastboot version....then the system file will flash for you. Only the newest supports large files.
Sent from my Pixel using Tapatalk
maulich said:
You need to update your fastboot version....then the system file will flash for you. Only the newest supports large files.
Click to expand...
Click to collapse
Good call...totally forgot about that man
BakedTator said:
Good call...totally forgot about that man
Click to expand...
Click to collapse
Thanks to both of you! I actually did get my phone to boot up just before you replied by flashing to boot.img to both slots. Just installed TWRP and flashed superSU after that to get root. All is well now!
Related
It's fair to say I'm an idiot. I couldn't update my OPO to XNPH30O, so I thought it was a good idea to reboot the recovery (TWRP) and reset my device. I clicked on advance and checked all the boxes, including system... So as dumb as I was I didn't know what it meant, so accidentally I erased my operating system. Now I don't know what to do. Could somebody please help me. I already tried this, but I received an error: http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
pronkjuweel said:
It's fair to say I'm an idiot. I couldn't update my OPO to XNPH30O, so I thought it was a good idea to reboot the recovery (TWRP) and reset my device. I clicked on advance and checked all the boxes, including system... So as dumb as I was I didn't know what it meant, so accidentally I erased my operating system. Now I don't know what to do. Could somebody please help me. I already tried this, but I received an error: http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Click to expand...
Click to collapse
Goto android development and download any rom mahdi or calkulins and perform full wipe from twrp and flash it...if that didnt bootnurbdevice foral a reason or other u have to flash stock using fastboot,
Try and lets see
Nickthegr8 said:
Goto android development and download any rom mahdi or calkulins and perform full wipe from twrp and flash it...if that didnt bootnurbdevice foral a reason or other u have to flash stock using fastboot,
Try and lets see
Click to expand...
Click to collapse
That's exactly what I did: [GUIDE] Return your OPO to 100% Stock (Current Build - XNPH30O) , but it failed as I showed above.
What is the step that you want to achieve? Stock ROM? Custom ROM?
If you're able to get into fastboot and recovery mode, your device is not bricked
If you have fastboot or can access your recovery your fine. You have wiped your complete phone so you will need to sideload an appropriate ROM or put it onto a USB stick and use USB to loaf ROM from twrp
zephiK said:
What is the step that you want to achieve? Stock ROM? Custom ROM?
If you're able to get into fastboot and recovery mode, your device is not bricked
Click to expand...
Click to collapse
I want stock ROM.
nathlynn22 said:
If you have fastboot or can access your recovery your fine. You have wiped your complete phone so you will need to sideload an appropriate ROM or put it onto a USB stick and use USB to loaf ROM from twrp
Click to expand...
Click to collapse
I can access my fastboot and my recovery (TWRP). How do you sideload an appropriate ROM or put it onto a USB stick and use USB to load ROM from twrp?
Thank you both for your help
pronkjuweel said:
I want stock ROM.
I can access my fastboot and my recovery (TWRP). How do you sideload an appropriate ROM or put it onto a USB stick and use USB to load ROM from twrp?
Thank you both for your help
Click to expand...
Click to collapse
Just browsing the forums don't have a OPO but its all the same with twrp if you have a USB otg cable put the stock ROM you want which you will find in development put that onto the USB stick then connect USB stick to otg cable then install through twrp. Or of you can't do that search on google how to sideload an app using twrp and you will find your answer and flash it that way
nathlynn22 said:
Just browsing the forums don't have a OPO but its all the same with twrp if you have a USB otg cable put the stock ROM you want which you will find in development put that onto the USB stick then connect USB stick to otg cable then install through twrp. Or of you can't do that search on google how to sideload an app using twrp and you will find your answer and flash it that way
Click to expand...
Click to collapse
Do you know which one of these two version I need to download?
cm-11.0-XNPH30O-bacon-signed-fastboot.zip
or
cm-11.0-XNPH30O-bacon-boot-debuggable.img
pronkjuweel said:
Do you know which one of these two version I need to download?
cm-11.0-XNPH30O-bacon-signed-fastboot.zip
or
cm-11.0-XNPH30O-bacon-boot-debuggable.img
Click to expand...
Click to collapse
Your best bet is asking @zephiK that as I'm pretty sure he has the phone so he could help better there.
pronkjuweel said:
Do you know which one of these two version I need to download?
cm-11.0-XNPH30O-bacon-signed-fastboot.zip
or
cm-11.0-XNPH30O-bacon-boot-debuggable.img
Click to expand...
Click to collapse
fastboot.zip
zephiK said:
fastboot.zip
Click to expand...
Click to collapse
I downloaded the file, how do I put in on my phone?
pronkjuweel said:
I downloaded the file, how do I put in on my phone?
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-one/orig-development/discussion-cyanogenmod-11s-t2840305
Follow the instructions under "Instructions." You'll need fastboot environment set up.. http://forum.xda-developers.com/showthread.php?t=2788632
zephiK said:
http://forum.xda-developers.com/oneplus-one/orig-development/discussion-cyanogenmod-11s-t2840305
Follow the instructions under "Instructions." You'll need fastboot environment set up.. http://forum.xda-developers.com/showthread.php?t=2788632
Click to expand...
Click to collapse
I downloaded the file from the site and followed the instructions, all the steps worked, expect the last one:
fastboot flash modem NON-HLOS.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash LOGO logo.bin
fastboot update -w cm-11.0-XNPH30O-bacon-signed-fastboot.zip
There isn't such an file when I unpack the zip.And if you checked out the attachment on my original post you see that I got an error with this method? Any idea how to fix that? thanks alot.
Had the same weird boot.sig error when following the CM11s guide too. It seems the last command didn't want to work for me either. Here's how to fix it:
Get the CM11s zip and extract the contents. Stick the OPO into fast boot mode and open your command line.
Then do each command manually (copy/paste):
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash modem NON-HLOS.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash LOGO logo.bin
fastboot reboot
Source: http://forum.xda-developers.com/showthread.php?t=2770535
That should get you back up and running.
kinghu said:
Had the same weird boot.sig error when following the CM11s guide too. It seems the last command didn't want to work for me either. Here's how to fix it:
Get the CM11s zip and extract the contents. Stick the OPO into fast boot mode and open your command line.
Then do each command manually (copy/paste):
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash modem NON-HLOS.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash LOGO logo.bin
fastboot reboot
Source: http://forum.xda-developers.com/showthread.php?t=2770535
That should get you back up and running.
Click to expand...
Click to collapse
Thank you man! It worked. The rest of you who helped my out also thanks.
Now that's what I like seeing. People helping others. Great job guys
Hi, i have a nexus 5 rooted on stock android 5.1.1 . I am trying to flash the 5.1.1 factory image to unroot my device. But unfortunately i just get this message when its trying to flash the system.img and my device is now bricked
target reported max download size of 1073741824 bytes
load file:could not allocate 1073741824 bytes
error: cannot load 'system.img' : not enough space.
If someone could please help me with this i would be so greatful.
thank you
this is posted on the wrong section but i had this problem, i just went to
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
and did the second method and it worked
ok thank you so much! are you sure it works?
stanleylam24 said:
this is posted on the wrong section but i had this problem, i just went to
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
and did the second method and it worked
Click to expand...
Click to collapse
thanks so much are you sure this works?
I agree, this method works for me
yeah It works, I have this issue to every update now.
you need to extract the files in the zip and flash them one by one
fastboot flash bootloader bootloader-hammerhead-hhz12k.img
fastboot reboot-bootloader
fastboot flash radio radio-hammerhead-m8974a-2.0.50.2.27.img
fastboot reboot-bootloader
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot reboot
of course I don't flash userdata, I don't want to wipe my n5
Matrix_19 said:
yeah It works, I have this issue to every update now.
you need to extract the files in the zip and flash them one by one
fastboot flash bootloader bootloader-hammerhead-hhz12k.img
fastboot reboot-bootloader
fastboot flash radio radio-hammerhead-m8974a-2.0.50.2.27.img
fastboot reboot-bootloader
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot reboot
of course I don't flash userdata, I don't want to wipe my n5
Click to expand...
Click to collapse
ok thank you! im gonna try flash the 6.0 image, wish me luck!
stanleylam24 said:
this is posted on the wrong section but i had this problem, i just went to
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
and did the second method and it worked
Click to expand...
Click to collapse
hi it didn't work, just shows this:
C:\Users\my name\Desktop\Minimal ADB and Fastboot>fastboot fla
sh system system.img
target reported max download size of 1073741824 bytes
error: cannot load 'system.img'
Matrix_19 said:
yeah It works, I have this issue to every update now.
you need to extract the files in the zip and flash them one by one
fastboot flash bootloader bootloader-hammerhead-hhz12k.img
fastboot reboot-bootloader
fastboot flash radio radio-hammerhead-m8974a-2.0.50.2.27.img
fastboot reboot-bootloader
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot reboot
of course I don't flash userdata, I don't want to wipe my n5
Click to expand...
Click to collapse
hi it didn't work, just shows this:
C:\Users\my name\Desktop\Minimal ADB and Fastboot>fastboot fla
sh system system.img
target reported max download size of 1073741824 bytes
error: cannot load 'system.img'
It could be the wrong system path, file name, folder name, cmd prompt not as admin. You have to have some sort of knowledge to figure out yourself. I had this problem but was able to fix it on my on. There are many factors that might cause this.
maybe try to find a more recent version of your ADB/Fastboot tools ? I've never had any issue manually
***EDIT*** platform-tool file outdated dag-nam-it... all fixed got mm installing as we speak thanks @Matrix_19 for the pointer :beer:
***EDIT "*** attached a.zip of platform-tools taken from the latest android-sdk
Hi, I need your help....
Where can I find ROM with system.img, boot.img, userdata.img etc ?
for some reasons, mainly because i'm a dumb, i erased the entire partition of the OPO64.
Now, the only things I can do is to boot into :
- Fastboot Mode
- TWRP (that I installed just before doing silly things, like wiping everything out...)
I am wondering how to reinstall any OS on my phone, LineageOS or RR or anything else to get this phone working again. As there is no physical SDcard slot, I can't put a ROM on it to flash it from TWRP.
the only ROM I've found is CM13.x found here : https://www.androidsage.com/2016/08...anogen-os-13-1-2-znh2kas3p0-update-cm-13-1-2/
is it possible to get some other ROM with all the .img files ?
adb commands do not work.
The only thing I ca do is using fasboot commands.
As far as I understood, I could use there commands :
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
BUT : when I unzip all the ROMs I've found so far, there is always a boot.img file (and the fastboot flash boot boot.img works), but there is no other IMG file in the ZIP. No system.img, no userdata.img etc
Where can I download a ROM providing these files ?
is it mandatory to flask recovery.img ? I still want to use TWRP
Many many thanks
cm-13.1.2-ZNH2KAS3P0-bacon-signed-fastboot-76d803f730
cm-13.1.2-ZNH2KAS3P0-bacon-signed-fastboot-76d803f730 - FLASH it through BRT - Bacon Root Toolkit
flyjodel said:
Hi, I need your help....
Where can I find ROM with system.img, boot.img, userdata.img etc ?
for some reasons, mainly because i'm a dumb, i erased the entire partition of the OPO64.
Now, the only things I can do is to boot into :
- Fastboot Mode
- TWRP (that I installed just before doing silly things, like wiping everything out...)
I am wondering how to reinstall any OS on my phone, LineageOS or RR or anything else to get this phone working again. As there is no physical SDcard slot, I can't put a ROM on it to flash it from TWRP.
the only ROM I've found is CM13.x found here : https://www.androidsage.com/2016/08...anogen-os-13-1-2-znh2kas3p0-update-cm-13-1-2/
is it possible to get some other ROM with all the .img files ?
adb commands do not work.
The only thing I ca do is using fasboot commands.
As far as I understood, I could use there commands :
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
BUT : when I unzip all the ROMs I've found so far, there is always a boot.img file (and the fastboot flash boot boot.img works), but there is no other IMG file in the ZIP. No system.img, no userdata.img etc
Where can I download a ROM providing these files ?
is it mandatory to flask recovery.img ? I still want to use TWRP
Many many thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
It's not mandatory to flash recovery.img.
Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
It's not mandatory to flash recovery.img.
Click to expand...
Click to collapse
thank you !
flyjodel said:
thank you !
Click to expand...
Click to collapse
Instead hit the "thanks button "... Just sayin'
Im reverting back to android 6.0 for my k1
But when i go to flash userdata its says userdata isnt found
And i look in the zip and it wasnt there so i downloaded again and it still wasnt there any suggestions
1 more thing nvidias instrucrions say to
Fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
And rhats it do i reboot after blob?
Cause someone elses tutorial says to
fastboot flash recovery {dir}/recovery.img
fastboot flash boot {dir}/boot.img
fastboot flash system {dir}/system.img
fastboot flash userdata {dir}/userdata.img
fastboot flash staging {dir}/blob
fastboot flash dtb {dir}/tegra124-tn8-p1761-1270-a04-e-battery.dtb
Tjeres an extra command?
Which do i use?
Thx
Iceek1 said:
Im reverting back to android 6.0 for my k1
But when i go to flash userdata its says userdata isnt found
And i look in the zip and it wasnt there so i downloaded again and it still wasnt there any suggestions
1 more thing nvidias instrucrions say to
Fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
And rhats it do i reboot after blob?
Cause someone elses tutorial says to
fastboot flash recovery {dir}/recovery.img
fastboot flash boot {dir}/boot.img
fastboot flash system {dir}/system.img
fastboot flash userdata {dir}/userdata.img
fastboot flash staging {dir}/blob
fastboot flash dtb {dir}/tegra124-tn8-p1761-1270-a04-e-battery.dtb
Tjeres an extra command?
Which do i use?
Thx
Click to expand...
Click to collapse
Don't worry, that one isn't included in the latest Nougat builds as well and they still flash normally.
Just proceed without that
help my phone's dead stuck at Qualcomm crash dump mode:crying:
dogman.jp said:
help my phone's dead stuck at Qualcomm crash dump mode:crying:
Click to expand...
Click to collapse
What were you trying to do before this happened. What rom are you using.
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
I had the same issue but I could actually boot into GSIs. Although it would reboot into the crash dump screen after the phone went to sleep.
Flashing stock 5.1.11 did temporarily fix it but as soon as I installed any custom rom, the issue would return.
Thankfully there's a solution:
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Long story short, some file got corrupted or something and nothing besides an EDL flash can fix it. You need to enter EDL ( power off the phone, hold volume up for 10 seconds and connect it to the pc while still holding vol up ) and if your PC recognizes the phone as qcom 9008 or something like that, open up the program and let it flash all the stuff onto the phone.
After it's done, the issue should be solved.
I had this issue while I was trying to port roms. What I did was go to fastboot, boot twrp, flash OOS OTA.
Edit: Now I'm dead stuck at crash dump mode. I cant boot TWRP over fastboot it goes back to crash dump mode and I dont have windows machine so I cant use MSM tool I will try fastboot OOS installer now.
Edit2: I managed to boot the phone now. I have followed the following way:
1. I have dumped the Beta 3's payload.bin with: python payload_dumper.py payload.bin
2. I have flashed the following partitions through fastboot:
fastboot flash aop_a aop.img
fastboot flash aop_b aop.img
fastboot flash bluetooth_a bluetooth.img
fastboot flash bluetooth_b bluetooth.img
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dsp_a dsp.img
fastboot flash dsp_b dsp.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash fw_4j1ed_a fw_4j1ed.img
fastboot flash fw_4j1ed_b fw_4j1ed.img
fastboot flash fw_4u1ea_a fw_4u1ea.img
fastboot flash fw_4u1ea_b fw_4u1ea.img
fastboot flash modem_a modem.img
fastboot flash modem_b modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw_a qupfw.img
fastboot flash qupfw_b qupfw.img
fastboot flash storsec_a storsec.img
fastboot flash storsec_b storsec.img
fastboot flash system_a system.img
fastboot flash system_b system.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot flash vendor_a vendor.img
fastboot flash vendor_b vendor.img
fastboot flash LOGO_a LOGO.img
fastboot flash LOGO_b LOGO.img
And it works after that. If you can't dump the files, I can upload them for you.
The bad thing is, you can't install custom rom, custom kernel, install twrp or do anything that makes Oneplus Oneplus... This needs to be fixed as soon as possible.
ereneren564 said:
I had this issue while I was trying to port roms. What I did was go to fastboot, boot twrp, flash OOS OTA.
Edit: Now I'm dead stuck at crash dump mode. I cant boot TWRP over fastboot it goes back to crash dump mode and I dont have windows machine so I cant use MSM tool I will try fastboot OOS installer now.
Edit2: I managed to boot the phone now. I have followed the following way:
1. I have dumped the Beta 3's payload.bin with: python payload_dumper.py payload.bin
2. I have flashed the following partitions through fastboot:
fastboot flash aop_a aop.img
fastboot flash aop_b aop.img
fastboot flash bluetooth_a bluetooth.img
fastboot flash bluetooth_b bluetooth.img
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dsp_a dsp.img
fastboot flash dsp_b dsp.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash fw_4j1ed_a fw_4j1ed.img
fastboot flash fw_4j1ed_b fw_4j1ed.img
fastboot flash fw_4u1ea_a fw_4u1ea.img
fastboot flash fw_4u1ea_b fw_4u1ea.img
fastboot flash modem_a modem.img
fastboot flash modem_b modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw_a qupfw.img
fastboot flash qupfw_b qupfw.img
fastboot flash storsec_a storsec.img
fastboot flash storsec_b storsec.img
fastboot flash system_a system.img
fastboot flash system_b system.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot flash vendor_a vendor.img
fastboot flash vendor_b vendor.img
fastboot flash LOGO_a LOGO.img
fastboot flash LOGO_b LOGO.img
And it works after that. If you can't dump the files, I can upload them for you.
The bad thing is, you can't install custom rom, custom kernel, install twrp or do anything that makes Oneplus Oneplus... This needs to be fixed as soon as possible.
Click to expand...
Click to collapse
all you had to do was flash boot and done!
are you trying to boot recovery img ? I got that problem too. but it fixed by using this command "flastboot flash boot twrpname.img" . then press volume up button till u got the recovery options and press power. after u booted up into the twrp , flash the twrp zip. reboot to recovery again just to make sure that the twrp already installed. then flash magisk. reboot. done! sorry 4 bad english
dogman.jp said:
help my phone's dead stuck at Qualcomm crash dump mode:crying:
Click to expand...
Click to collapse
I had that issue last night - I flashed OB3 - and flashed a kernel that worked on OB1/OB2.
I used the MSM download tool but doing that you lose everything. I tried the fastboot flashing method of OOS but had no success.
Did you get it flashing OB3? Then TWRP or a kernel?
https://forum.xda-developers.com/showpost.php?p=77628189&postcount=438
You could also try changing active slots
fastboot --set-active=x
"x" being a or b for the respective slot
Ther's a problem with recovery and some other stuff. You can solve the problem with a patched boot with recovery. You can find it in the blu stark trade!
go here https://forum.xda-developers.com/one...-beta-t3818853
download Beta 3 Patched Boot from here https://drive.google.com/open?id=1TD...NoBAReZVZlir0U
reboot to fastboot and type
fastboot flash boot beta3_patched_boot.img
reboot normally and rooted
when open goto magisk and flash from the app the 17.1.zip
Easiest way is flashing recovery from fastboot mode with command fastboot flash boot recovery.img. After that reboot recovery, wipe, install rom & recovery reboot system :good:
_MartyMan_ said:
Easiest way is flashing recovery from fastboot mode with command fastboot flash boot recovery.img. After that reboot recovery, wipe, install rom & recovery reboot system :good:
Click to expand...
Click to collapse
did you try it? because the latest beta doesnt boot and goes to soft brick menu
check here https://forum.xda-developers.com/showpost.php?p=77628189&postcount=438
you need to flash latest OB3 blu_twrp 9.85 patched boot
Hi, your links are truncated.
Could you correct them ?
Thank you.
didicola said:
did you try it? because the latest beta doesnt boot and goes to soft brick menu
check here https://forum.xda-developers.com/showpost.php?p=77628189&postcount=438
you need to flash latest OB3 blu_twrp 9.85 patched boot
Click to expand...
Click to collapse
okay I did
fastboot flash boot boot_op6_ob3_twrp.img
Now afterwards I can't even go into the fastboot, and rarely I can get into TWRP. I can't even boot normally. Sorry I am a noob, what should I do? When I try to start the phone it gets stuck on "the boot loader is unlocked"-screen.
Since I can't use fastboot or boot normally, can I flash stock through twrp? and if yes can you link me to the correct file?
EDIT: ok I used this https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665 and I lost all my data, but whatever, im just glad my phone still works
Before you try to use the Qualcomm way,
You can try to boot into the fastboot (power + volume plus without plugging in the USB cable) and flash the unofficial twrp which is from blu_spark.
https://forum.xda-developers.com/devdb/project/?id=27466#downloads
I met this problem when I tried to install official twrp after I installed the OxygenOS9 BATE3.
I think this problem is because of some conflicts between the twrp and the OS (I guess)
My friend told me that I should try to flash another recovery.
And I tried to flash the unofficial from blu_spark and it finally works.
Thanks, Blu_Spark.
Even if it still isn't work, you can try to flash the official recovery from the OnePlus.
I will be happy if it works for you.
MrSteelX said:
all you had to do was flash boot and done!
Click to expand...
Click to collapse
I am facing the same issue with OB4
I also tried the fasrtboot flashing method.
But on that thread, one of the steps is to Fastboot boot twrp
and later adb commands to be executed in twrp mode.
But I CANNOT go into recovery on OB4
please hlep
HannibalLecter said:
I am facing the same issue with OB4
I also tried the fasrtboot flashing method.
But on that thread, one of the steps is to Fastboot boot twrp
and later adb commands to be executed in twrp mode.
But I CANNOT go into recovery on OB4
please hlep
Click to expand...
Click to collapse
I had the same issue last night with the 9.0 stable. U downloaded the modified TWRP from BluSpark, that booted just fine and flashed the installer. All is well now
Azhar_Fahry said:
are you trying to boot recovery img ? I got that problem too. but it fixed by using this command "flastboot flash boot twrpname.img" . then press volume up button till u got the recovery options and press power. after u booted up into the twrp , flash the twrp zip. reboot to recovery again just to make sure that the twrp already installed. then flash magisk. reboot. done! sorry 4 bad english
Click to expand...
Click to collapse
hummmmm......flash twrp to boot?It's make me device to loop CrashDump Mode X-X
493Arceus said:
hummmmm......flash twrp to boot?It's make me device to loop CrashDump Mode X-X
Click to expand...
Click to collapse
Is there any solution for this? I had to revive my OP6 with the fastboot stock rom and now I am unable to fastboot into TWRP. Also end up in crash dump mode.
Edit: OK flashing Blu Spark TWRP image fixed the problem.
shiverz07 said:
Is there any solution for this? I had to revive my OP6 with the fastboot stock rom and now I am unable to fastboot into TWRP. Also end up in crash dump mode.
Edit: OK flashing Blu Spark TWRP image fixed the problem.
Click to expand...
Click to collapse
Flashed this Blu Spark TWRP modded but stuch on Blu Spark logo
When I'm trying to boot normaly after (long press on power menu to shutdown), stuck on the first screen "The boot loader is unlocked and software ..."
desperate..........:crying: