Related
Hi!
I have a huawei ascend G510-0200 and while installing a custom rom it is bricked...!
while trying to switch back to stock rom it gives an error and its bootloader got curropted...!
devices is not recognize into PC even not detected by fastboot or adb with any try...!
I think the bootloader got corrupt totally...!
while trying to turn it on it got blue just after the "huawei ascend" screen...!
is there any method to resolve this issue?
I've found a thread to use a bootable sdcard to fix this problem but this was only for the nook device...!
what to do in this case?
Can I use this method to solve this problem...?
if yes then what is the method to boot huawei ascend G510-0200 from sdcard?
Urgent Reply needed...!
Any help will be appreciated ...!
Reply
are you able to go in CWM mode?
naved97 said:
are you able to go in CWM mode?
Click to expand...
Click to collapse
Not able to go any mode like cwm or fastboot
my device is not recognized in pc...!
Muhammad_Ali said:
Not able to go any mode like cwm or fastboot
my device is not recognized in pc...!
Click to expand...
Click to collapse
Hey, sorry for late reply, check this out http://forum.xda-developers.com/showthread.php?t=1701471
Hello fellow huawei p8 max owners. I still haven't been able to root my P8 Max. My computer is running windows 10. Is there someone who can put the files here that are needed for a succes full root procedure? Thank you in advance.
I'm running B026........
Successful Root
I have achieved root on both of my P8 Max devices (DAV-703L) following this process posted by rowihel2012 (and thanks to dodzs for posting the root tools):
http://forum.xda-developers.com/android/help/q-root-p8-max-t3152663/page3
1) Get your unlock code to unlock your bootloader (I am running Windows 10 and had no problem with adb commands after installing HiSuiteSetup_2.3.55.1.exe (http://consumer.huawei.com/en/support/products/downloads/p8max-en.htm)
2) Load TWRP (after completing "fastboot flash recovery recovery.img" remember to remove your USB cable. Then hit the power+volume up. When you see the Huawei logo release the power button and continue to hold the volume up button until you see TWRP.
3) Load the UPDATE-SuperSU-v2.46 file in the root of your sd card. Boot into TWRP using power+volume up method. Once in TWRP click Install and select the zip file and bingo...you have root.
Thank you htchd2mtk....I am gonna try
zenn66 said:
Thank you htchd2mtk....I am gonna try
Click to expand...
Click to collapse
do not worry it is very easy steps
and you have any problem we will help :good:
Thank you @rowihel2012 ?
zenn66 said:
Thank you @rowihel2012
Click to expand...
Click to collapse
you are wellcomed my friend
help..
rowihel2012 said:
you are wellcomed my friend
Click to expand...
Click to collapse
I managed too unlock bootloader but now I am stuck... how do i flash twrp and superuser? please explaine??
zenn66 said:
I managed too unlock bootloader but now I am stuck... how do i flash twrp and superuser? please explaine??
Click to expand...
Click to collapse
Follow the steps in post #8 by @dodzs here: http://forum.xda-developers.com/showpost.php?p=62145915&postcount=8
opasha said:
Follow the steps in post #8 by @dodzs here: http://forum.xda-developers.com/showpost.php?p=62145915&postcount=8
Click to expand...
Click to collapse
very easy my friend dont worry just download this file
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
and rename it to recovery.img and but it in fastboot folder
then flash it with cmd type
fastboot flash recovery recovery.img
then enter recovery with holding volume up+power
and install this zip file
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now your p8max is rooted
It is!! Thank you so much! @rowihel2012
I have tried fastboot in Windows XP with my Huawei P8 MAX, without success...
I have tried
UniversalAdbDriverSetup6.msi
Huawei_Mobile_Driver_v1.0.zip
even the Huawei USB Driver 1.6.10.08
There is no problem with starting my Huawei in proper mode (with USB cable connected it have been started with Vol-up and power)
In control panel/devices I DON'T have question marks (?) devices now, after driver installation it all looks ok.
But the "fastboot devices" (minimal_adb_fastboot_v1.3_setup.zip) shows nothing
and "fastboot device" shows <wait for....>
Of couse I have the unlock number from https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
Which version of drivers from which site is ok for Huawei P8 max and Windows xp ?
Please help !!!
-----------------------------------------------------------
SOLVED
Magically "fastboot devices" has showed my P8max (after restart probably)
Hi all,
I have problem. Since i unlocked bootloader, istalled twrp recovery, tryed to install custom rom. And its succses. Rom installed without errors. But in twrp recovery showing no os installed. And system wont boot. After phone restarts 2 times i tryed to boot again in twrp recovery. And after all it boot just in Huawei eRecovery. Trwp recovery id gone. And after that i booted phone in fastboot &rescue. Showing. Bootloader unlocked and new think FRP LOCK. What is that? Some one maybe can me explaine? What does it meen? In adb and fast boot i get errors when try to flash twrp recovery.img
r4ason said:
Hi all,
I have problem. Since i unlocked bootloader, istalled twrp recovery, tryed to install custom rom. And its succses. Rom installed without errors. But in twrp recovery showing no os installed. And system wont boot. After phone restarts 2 times i tryed to boot again in twrp recovery. And after all it boot just in Huawei eRecovery. Trwp recovery id gone. And after that i booted phone in fastboot &rescue. Showing. Bootloader unlocked and new think FRP LOCK. What is that? Some one maybe can me explaine? What does it meen? In adb and fast boot i get errors when try to flash twrp recovery.img
Click to expand...
Click to collapse
Do you have any official full rom?
HAIDERSHAH said:
Do you have any official full rom?
Click to expand...
Click to collapse
Yes i have, all roms downloaded,news and olders.
r4ason said:
Yes i have, all roms downloaded,news and olders.
Click to expand...
Click to collapse
Download huawei update.app extarctor and extract the update.app first.
then turn on adb terminal
flash recovery
cache
cust
boot
system
userdata
Your phone will work IN SHA ALLAH
HAIDERSHAH said:
Download huawei update.app extarctor and extract the update.app first.
then turn on adb terminal
flash recovery
cache
cust
boot
system
userdata
Your phone will work IN SHA ALLAH
Click to expand...
Click to collapse
I cant use adb commands, just adb device,fastboot reboot bootloader. Others i get error. even i cant install twrp recovery.img
r4ason said:
I cant use adb commands, just adb device,fastboot reboot bootloader. Others i get error. even i cant install twrp recovery.img
Click to expand...
Click to collapse
I tryed this, and tryed dc-unlocker pheonix program witch cost for me 15€ and nothing. Problem is i cant use normal adb all commands. Before it worked briliant.
r4ason said:
I cant use adb commands, just adb device,fastboot reboot bootloader. Others i get error. even i cant install twrp recovery.img
Click to expand...
Click to collapse
what are your commands and why you cant use them?
send me screen shot. i played with huawei devices since i had mate 1 years ago
HAIDERSHAH said:
what are your commands and why you cant use them?
send me screen shot. i played with huawei devices since i had mate 1 years ago
Click to expand...
Click to collapse
I created other post with minimal adb&fastboot. Just look in forum 3 posts bellow
r4ason said:
I tryed this, and tryed dc-unlocker pheonix program witch cost for me 15€ and nothing. Problem is i cant use normal adb all commands. Before it worked briliant.
Click to expand...
Click to collapse
you need to reinstall your adb. your commands will start working.
if you are using windows then go device manager and uninstall adb driver, then click search and it will reinstall the adb. after that try again the commands. thats what i do always when i stuck in that situation like yours.
or simply try another computer for adb
r4ason said:
I created other post with minimal adb&fastboot. Just look in forum 3 posts bellow
Click to expand...
Click to collapse
Since in phone was NXT-L29C432B320 firmware. I searched in internet its able to update to nougat. L29C432B521(beta).
I used dload method and phone get bricked. After that tryed rollback software to all older versions.And nothing, dload dont helped.
Next i writed to huawei custumservise and they gives me bootloader unlock code. I used it and succsesfull unlocked phone.
Next step was twrp revovery.img installed succsesfully.And worked fine.
Searched international custom rom for my device.And installed via twrp recovery without errors or faild. But in twrp meniu bellow i saw "os not installed"
After that phone restarted 2 times, and wont boot system. That twrp recovery disapier from phone. And until now im stuck here to find any soliution.
Yesturday i was tryed even dc unlocker pheonix program for 15€ and its not helped..
HAIDERSHAH said:
you need to reinstall your adb. your commands will start working.
if you are using windows then go device manager and uninstall adb driver, then click search and it will reinstall the adb. after that try again the commands. thats what i do always when i stuck in that situation like yours.
or simply try another computer for adb
Click to expand...
Click to collapse
I tryed 2 computers, and reinstalled adb many times. Even tryed srk tools.
r4ason said:
I tryed 2 computers, and reinstalled adb many times. Even tryed srk tools.
Click to expand...
Click to collapse
Did you tried the rollback package in dload? Use external sd.
gm007 said:
Did you tried the rollback package in dload? Use external sd.
Click to expand...
Click to collapse
Dload for me not working,tryed olders versions to rollback,but nothing. Dont pass 5%
r4ason said:
Dload for me not working,tryed olders versions to rollback,but nothing. Dont pass 5%
Click to expand...
Click to collapse
Dload for rollback package will pass,try it.
And if successful dload full firmware.
http://forum.xda-developers.com/mate-8/general/best-easiest-to-rollback-to-emui-4-0-t3507399/page1
gm007 said:
Dload for rollback package will pass,try it.
And if successful dload full firmware.
Click to expand...
Click to collapse
Where i can get this package fot NXT-L29C432B320?
r4ason said:
Where i can get this package fot NXT-L29C432B320?
Click to expand...
Click to collapse
Can i use other country rollback package?
r4ason said:
Can i use other country rollback package?
Click to expand...
Click to collapse
I think so ,try russia's package,I gave you the link above.
r4ason said:
I tryed 2 computers, and reinstalled adb many times. Even tryed srk tools.
Click to expand...
Click to collapse
ok. i had the same issue. i am electronics engineer. and i repaired many phones this way
gm007 said:
I think so ,try russia's package,I gave you the link above.
Click to expand...
Click to collapse
Pass 76% and get software install failed
r4ason said:
Pass 76% and get software install failed
Click to expand...
Click to collapse
Try the 2 other packages.
Hello,
Sorry for this post but i have a real problem !
I have install a twrp and root my phone for flash rom but now i have factory rest and haven't any OS...
I cant' launch twrp and even i install with fastboot. I have just "your device is booting now".
I don't know how to "backup" and repair my honor.
If anyone undernstand my problem...
ps : I'm really sorry for my english
If you need picture or more information please tell me ...
Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP
djx24 said:
Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP
Click to expand...
Click to collapse
Thanks for your answer
I try to install a recovery on fastboot but when i reboot my phone stay on "your device is booting now..." that's the problem ...
I have try to use "fastboot boot twrp.img" but failed because command not allowed.
Try to erase but not allowed too. I can flash recovery, or flash boot but change nothing...
Rommco05 said:
Try instal full fw (M B120 or B131) via dload method
Click to expand...
Click to collapse
dload method ? But i need my phone turned ON for that no ? or i need twrp ? But i can't use recovery mode. I can use only erecovery and fastboot.
Thanks for your message
Rommco05 said:
...??? no. Turn off phone and turn on with buttons vol+/vol-/on,off press together. Make folder on SDcard dload/ put inside unzip full fw.
Click to expand...
Click to collapse
Thanks you ! Installing update...
I think it work
(Sorry for all i'm a noob ...)
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Solved
dermpuma said:
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Click to expand...
Click to collapse
Solved with
FASTBOOT ROM
https://en.miui.com/a-234.html
AND
xiaomiflash 2017.4.25.0
REBOOT ERROR ROM BUT YOU UNLOCK BOOTLOADER AND ENJOY
SORRY MY BAD ENGLISH
THANKS
U used a flashboot ROM via Mi Flash to fix this right? Whole applying the clean all.bat setting?
I had the same prob and this fixed it. But doing so reset my recovery :/
dermpuma said:
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Click to expand...
Click to collapse
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
bootloader is locked error occuer
mathan7 said:
bootloader is locked error occuer
Click to expand...
Click to collapse
What happened?
For some unknown reasons, I brick my phone too after flashing magisk on stock ROM 10.3.7. At first I'm getting bootloop. Then decided to just drop magisk and reflash stock ROM again. Then I encountered an error. Hopefully this method will work.
Naveenthemi said:
What happened?
Click to expand...
Click to collapse
problem solved. goto fastboot mode again unlock via miunlock
mathan7 said:
problem solved. goto fastboot mode again unlock via miunlock
Click to expand...
Click to collapse
Ah yes
format data once via twrp
diamantik said:
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
Click to expand...
Click to collapse
Hi, the bat file won't open! the one you mentioned, can you help me link me to a noob friendly forum? I'm uncertain exactly what step i am missing.
Thanks!!
DONE!!! i managed to do it so thanks really
I have same prblm and now my device not showing in fastboot mode i mean i go in fastboot mode and connect device to my lappi then my device not showing when I command fastboot devices please help urgent
---------- Post added at 07:34 PM ---------- Previous post was at 06:42 PM ----------
harryagg said:
Hi, the bat file won't open! the one you mentioned, can you help me link me to a noob friendly forum? I'm uncertain exactly what step i am missing.
Thanks!!
DONE!!! i managed to do it so thanks really
Click to expand...
Click to collapse
please bro help I m trouble in same situation How ugh solve this
yuvi15 said:
I have same prblm and now my device not showing in fastboot mode i mean i go in fastboot mode and connect device to my lappi then my device not showing when I command fastboot devices please help urgent
---------- Post added at 07:34 PM ---------- Previous post was at 06:42 PM ----------
please bro help I m trouble in same situation How ugh solve this
Click to expand...
Click to collapse
Install adb and fastboot drivers if still not detected check your usb cable.
You need internet on your laptop.
Hello. I have a redmi note 7 pro that died after updating to version 10.3.13 global version. it seems that this version came with antirollback. the phone came with the bootloader unlocked and I had installed twrp and root on it, and I didn't manage to associate it with my account. after updating, I tried to install an older version because I could not install twrp but unfortunately I left the check all and lock checked. so I opted for a dead phone with a locked bootloader and that didn't let me install an older version than 10.3.13. unfortunately the phone I think is the Chinese version and had an unofficial version installed by my global seller. after installing version 10.3.13 it tells me that this version of miui cannot be installed on this device. can anyone help me revive him?
My phone got bricked redme note 7 pro ,I tried with flash tool echo mismatch it's getting error what is the problem which rom i need
Anyone can tell how much service center charges to unbrick via edl mode?
diamantik said:
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
Click to expand...
Click to collapse
Great it worked