Database Info

Rooting- error: cannot load "flashboot flash recovery r1-modaco-reco... .img"

Rooting- error: cannot load "flashboot flash recovery r1-modaco-reco... .img"
I'm rooting my HTC One S the first time. And I was stupid and thought that HTC One X Clockworkmod flash would work.
Now I know how flashing and clockworkmod installing works but before that I accidentally flashed the One X command: "fastboot flash recovery recovery-clockwork-touch-5.8.2.7-endeavoru.img" and now when I go to recovery it gives me a red text and nothing works.
I searched everywhere for a guide to remove it and did not found. So I thought I could flash it over with an One S flash, but then when I entered the command: "fastboot flash recovery r1-modaco-recovery-clockwork-touch-ville.img" It gave me this: "error: cannot load 'recovery r1-modaco-recovery-clockwork-touch-ville.img'. My phone is connected perfectly, when I type 'fastboot devices' it shows me my phone is there.
So I think this is not a big problem for developers. Can anyone tell me what to flash or do to get rid of the One X recovery? Otherwise I just have to live with a phone with unlocked Bootloader and no access to root

Do you have the IMG I the directory from which you are running fast boot?

edscholl said:
Do you have the IMG I the directory from which you are running fast boot?
Click to expand...
Click to collapse
Ofcourse

rixrasta said:
Ofcourse
Click to expand...
Click to collapse
mabey I should just do a factory reset :/

Why don't you dl goo manager from market, open it and open menu and tap on Install OpenScriptRecovery and let it install twrp--although, I guess if you aren't rooted yet that won't work
Did you try fastbooting the cwmr from here--
http://www.clockworkmod.com/rommanager
Did you check the md5 on the modaco recovery before flashing
At the red text did you try hitting vol+ or vol- not sure which one takes you to stock recovery. What does red text say--
Did you hard reboot with holding down vol- and power at same time then release pwr after screen goes off and continue to hold vol-
Not sure what is wrong, just giving some ideas--

rugmankc said:
Why don't you dl goo manager from market, open it and open menu and tap on Install OpenScriptRecovery and let it install twrp--although, I guess if you aren't rooted yet that won't work
Did you try fastbooting the cwmr from here--
Did you check the md5 on the modaco recovery before flashing
At the red text did you try hitting vol+ or vol- not sure which one takes you to stock recovery. What does red text say--
Did you hard reboot with holding down vol- and power at same time then release pwr after screen goes off and continue to hold vol-
Not sure what is wrong, just giving some ideas--
Click to expand...
Click to collapse
Tyvm for your reply,
the cwmr for HTC One S does not exist any more on the page you gave me. There's only a blank page if you click on it
yes I did hard reboot and the red text says: This build is for development purposes only do not distribute outside HTC without HTC's written permission. Failure to comply my lead to legal action.
I tried the superboot from this site: htt p://w ww.m odaco.co m/to pic/352493-how-to-root-your-htc-one-s-for-windows-mac-and-linux/
This just brought up the recovery message again...
Then I tried flashing these files:h ttp://ww w.m odaco.c om/topic/353006-interim-clockworkmod-touch-recovery-for-the-htc-one-s-stock-download/
no help.
Any other ideas I should try?
However the flashing went through this time and there were no error, but the recovery is still f**ked.

rixrasta said:
Tyvm for your reply,
the cwmr for HTC One S does not exist any more on the page you gave me. There's only a blank page if you click on it
yes I did hard reboot and the red text says: This build is for development purposes only do not distribute outside HTC without HTC's written permission. Failure to comply my lead to legal action.
I tried the superboot from this site: htt p://w ww.m odaco.co m/to pic/352493-how-to-root-your-htc-one-s-for-windows-mac-and-linux/
This just brought up the recovery message again...
Then I tried flashing these files:h ttp://ww w.m odaco.c om/topic/353006-interim-clockworkmod-touch-recovery-for-the-htc-one-s-stock-download/
no help.
Any other ideas I should try?
However the flashing went through this time and there were no error, but the recovery is still f**ked.
Click to expand...
Click to collapse
Try this twrp .img
http://teamw.in/project/twrp2/100
The red text will stay till you relock, I believe, or flash stock recovery--

twrp recovery is the way to go. Me too I couldn't install the clockwork one!

rugmankc said:
Try this twrp .img
h ttp://team w. in/projec t/twrp 2/100
The red text will stay till you relock, I believe, or flash stock recovery--
Click to expand...
Click to collapse
I flashed the "openrecovery-twrp-2.2.2.0-ville.img". Didnnt change anything :/

sorry to hear that, not sure what else to do, so you still have onex recovery?
even if you run an ruu, i think you still have to flash the stock recovery first. haven't read up on that much, as never needed to run one
Don't know if trying to flash the stock recovery will help. I have the original one at home, but not sure if that is what they still call stock recovery with new ota's having come out

If it cannot load it, you probably spelt the name wrong. rename the image file to recovery.img (make sure it isn't .img.img) and flash that. Make sure the file path is correct! (e.g fastboot flash recovery C:\Users\Me\Desktop\recovery.img)

usaff22 said:
If it cannot load it, you probably spelt the name wrong. rename the image file to recovery.img (make sure it isn't .img.img) and flash that. Make sure the file path is correct! (e.g fastboot flash recovery C:\Users\Me\Desktop\recovery.img)
Click to expand...
Click to collapse
no no, the flashing finished successfully. I entered "fastboot flash recovery openrecovery-twrp-2.2.2.0-ville.img" and then it flashed without problems, but in the phone it didn't change a thing. If I enter recovery then there's the android icon with a white background and under it is the red text.
But keep guessing, maybe I really am doing something stupid wrong
When I go to Fastboot USB mode with my phone then I open the command prompt and firstly type "cd c:\CWM" (the folder where my flashing files are). Then secondly I type "fastboot devices" (just to be shure). And thirdly depending on what I am flashing I type "fastboot flash recovery name.img". I have tried "fastboot flash recovery openrecovery-twrp-2.2.2.0-ville.img", "fastboot flash recovery r2-modaco-recovery-clockwork-touch-ville" and "fastboot flash recovery ville_recovery_signed". Every one of them finishes successfully but doesn't change anything in the phone. I already have recovery-clockwork-touch-5.8.2.4-ville.zip and CWM-SuperSU-v0.96.zip in my phones directory to install root when I get into the recovery. In the C:\CWM folder in my computer are these files:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
(these where exctracted from fastboot.zip)
openrecovery-twrp-2.2.2.0-ville.img
r2-modaco-recovery-clockwork-touch-ville.img
ville_recovery_signed.img

the text won't disappear with unlocked bootloader, so that's ok.
Try to boot into bootloader hit fastboot reboot bootloader and then choose recovery. It can take a while to boot into recovery.
Gesendet von meinem HTC One S mit Tapatalk 2

stunner2002 said:
the text won't disappear with unlocked bootloader, so that's ok.
Try to boot into bootloader hit fastboot reboot bootloader and then choose recovery. It can take a while to boot into recovery.
Gesendet von meinem HTC One S mit Tapatalk 2
Click to expand...
Click to collapse
fastboot ->reboot bootloader ->bootloader ->recovery. Absolutely no change, It took half a second to bring up the "HTC quietly brilliant" logo and about two seconds for the red text to appear under it. No buttons work after that and I just have to hold the power button down to shut it down.
And by bootloader is unlocked!

As stunner said above it can take a while to boot into recovery, how long have you waited?
Give it a few minutes... Also you could try flashing stock recovery, it is distributed in the all-in-one tool and also in paulobriens posts about superboot. Then run a RUU.
But my best to would be to try fastboot booting a custom recovery, "fastboot boot cwm.img".

If this is the thing where you go int recovery for a millisecond and then back to the 'red text' screen (you have to watch carefully to notice), you should try erasing your cache in fastboot mode.
fastboot erase cache
Click to expand...
Click to collapse
-Jobo

It's gotten a little confusing and some suggestions are being repeated. I wonder if the android icon you are describing is the stock recovery symbol. At that screen have you tried to press vol+ or maybe volume-. I forget which one takes you to stock recovery. May want to check on that.
Also, have you tried typing "fastboot boot recovery" to go straight to recovery, bypassing htc restrictions
Here is very early stock recovery--not sure if it is still considered "stock" with new versions out now--I did mention that earlier--
https://www.dropbox.com/sh/yhrq0tia8512rj9/go28kc1NeP/ville_recovery_signed.img
I did have issues fastbooting recovery before. You can as mentioned try fastboot erase cache before fastbooting recovery. And change the name of your recovery to just recovery.img before you fastboot.
I assume you have nandroid backup on phone and copies of it and sdcard backup on pc.
I think when I had issues with recovery sticking it was my N1 and I typed "fastboot erase system" first, then fastbooted recovery. Then wiped all and restored nandroid. I am not sure we can do that on the 1s with no s-off. Someone else may know.
Can you access sdcard where you could reformat it fat32 thru a windows formatter program. Of course copy all to pc first. Sometimes sdcard formats help things you wouldn't expect it to.
Some folks have reported formatting works better thru phone on the 1s, maybe because it is an internal card. I did it once and think I had to redo it thru phone. But, if it gets recovery working, no big deal.
All these are suggestions and as the devs say--at your own risk--
I thought you said you said in first post, phone works, just no root capabilty. If that is true it should be fixable--I hope.
---------- Post added at 05:06 PM ---------- Previous post was at 04:32 PM ----------
rixrasta said:
no no, the flashing finished successfully. I entered "fastboot flash recovery openrecovery-twrp-2.2.2.0-ville.img" and then it flashed without problems, but in the phone it didn't change a thing. If I enter recovery then there's the android icon with a white background and under it is the red text.
But keep guessing, maybe I really am doing something stupid wrong
When I go to Fastboot USB mode with my phone then I open the command prompt and firstly type "cd c:\CWM" (the folder where my flashing files are). Then secondly I type "fastboot devices" (just to be shure). And thirdly depending on what I am flashing I type "fastboot flash recovery name.img". I have tried "fastboot flash recovery openrecovery-twrp-2.2.2.0-ville.img", "fastboot flash recovery r2-modaco-recovery-clockwork-touch-ville" and "fastboot flash recovery ville_recovery_signed". Every one of them finishes successfully but doesn't change anything in the phone. I already have recovery-clockwork-touch-5.8.2.4-ville.zip and CWM-SuperSU-v0.96.zip in my phones directory to install root when I get into the recovery. In the C:\CWM folder in my computer are these files:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
(these where exctracted from fastboot.zip)
openrecovery-twrp-2.2.2.0-ville.img
r2-modaco-recovery-clockwork-touch-ville.img
ville_recovery_signed.img
Click to expand...
Click to collapse
you should also have adb.exe if you are using adb--

frdd said:
As stunner said above it can take a while to boot into recovery, how long have you waited?
Give it a few minutes... Also you could try flashing stock recovery, it is distributed in the all-in-one tool and also in paulobriens posts about superboot. Then run a RUU.
But my best to would be to try fastboot booting a custom recovery, "fastboot boot cwm.img".
Click to expand...
Click to collapse
Okay I waited for 10 minutes, nothing happens. I've even tried to hold down all the button combinations(with the three buttons) for a few minutes.
I've tried flashing everything and fastboot boot just takes me directly to the recovery with the red text. I flashed both the recoveries in the all-in-one tool.
As I know absolutely nothing about RUU(only what the letters stand for) then I'd rather not do that because I read from some threads that RUU has quite a high chance to mess up your phone. Or if you direct me to a tutorial that u insure me that is 100% good then I could give it a go : D

[
I think I have made ​​the same mistake of flash recovery, but I can not get into cwm recovery, I only appear for 1 second the recovery, then restarts and returns to the operating system. SD card, all changes are discarded when you restart the phone, which is also only if I try to install or remove some utility. Can not install any recovery, even if fastboot works well and looks real mind install the recovery but when I reboot, it returns to its previous behavior, with recovery not working. I tried to install the recovery in every way, from fastboot, from All in one with quickroot, but none of these operations has changed the state of the system.
Unfortunately you can not install a Stock RUU because the bootloader unlocked and the recovery is not the stock, and especially not when there is no tutorial to follow to bring this situation to the ONE S, to its original state
Hopefully someone will be able to find a solution to your and my problem.

One option you guys may need to entertain, if applicable, would be to exchange phones with Carrier. Worth a shot--
I have not heard of this exact issue, but most comments say if you can't boot to recovery you are bricked--
Has anyone tried "fastboot boot recovery" command in terminal window?

Stuck in boot

Hi! My Oneplus One is stuck in boot (the oneplus logo).
I can get into fastboot but not recovery. I have followed some softbrick guides and the problem that I have is that even after flashing twrp as recovery I cant get into recovery. when I try to start it to recovery (volume up + power) I only get to the oneplus logo again. and when I use "fastboot boot twrp.img" the backlight comes on but the fastboot image stays, fastboot doesnt recognize it from this point so i have to restart it into fastboot mode again.
i have tried to flash the factory images, but nothing seems to change.
I dont know what to do, pls help..

After flashing recovery from fastboot, do NOT issue the reboot command. Press and hold the power button till phone powers off. If you issue the reboot command from fastboot, custom recovery will be lost. Also, don't know which twrp version you are trying to flash, but I would suggest flashing 2.8.6.0 first, then after you know you can get into recovery, you can flash another version.

Additionally, to boot to recovery you have to hold
volume down + power
volume up + power brings you to fastboot
Last but not least,
fastboot boot twrp.img
does not boot the recovery which is on your device, but the recovery image which is located inside your fastboot folder on your pc.

kenboyles72 said:
After flashing recovery from fastboot, do NOT issue the reboot command. Press and hold the power button till phone powers off. If you issue the reboot command from fastboot, custom recovery will be lost. Also, don't know which twrp version you are trying to flash, but I would suggest flashing 2.8.6.0 first, then after you know you can get into recovery, you can flash another version.
Click to expand...
Click to collapse
Ok, I did not know that the reboot command removes the custom recovery. Im almost certain that i've tried just powering down and trying recovery before too tho.
I was trying to flash twrp 3.0.0.0 so i'll try 2.8.6.0 asap
AcmE85 said:
Additionally, to boot to recovery you have to hold
volume down + power
volume up + power brings you to fastboot
Last but not least,
fastboot boot twrp.img
does not boot the recovery which is on your device, but the recovery image which is located inside your fastboot folder on your pc.
Click to expand...
Click to collapse
oops, i ofcourse ment that i try to get to recovery by volume down+power, and i know fastboot boot twrp.img boots from the .img on the computer, i just think its peculiar that nothing happens.

nothing has really happend after this, so i still need help.
summary: bump

I don't really get what you say. Perhaps i don't experiences before. @kenboyles72 is correct, official ROM may delete custom recovery (you can change the setting). Then @AcmE85 gives you an option, but it does not work.
Here is my option:
1. download any custom rom. The best idea is as minimum MB as possible. (Flash ROM directly from your PC)
2. flash your recovery, do NOT reboot. (fastboot flash recovery rec.img)
3. flash your ROM. (fastboot flash zip rom.zip)
Let's see if this would help you.

I had some issues a while back, where I was caught in a bootloop and flashing another rom. So I followed this guide, https://www.reddit.com/r/oneplus/comments/31sf0x/guide_how_to_return_from_oxygenos_to_stock_cm11s . You can skip flashing the userdata.img to keep all data on sdcard. Also you can substitute flashing twrp recovery img for stock recovery. I myself went ahead and flashed all stock just to make sure everything booted correctly, then went into dev options and disabled update cm recovery, booted back to fastboot and flashed twrp 2.8.6.0. Evey thing worked like a charm.

Flasing stock rom did not affect anything noticeably.. phone is still stuck in boot/fastboot

Just to confirm, have you tried either/both of these:
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732

I have followed the return to stock guide, but not the unbrick, since my phone is softbricked, not hardbricked.
I have followed this guide tho, to no avail https://m.reddit.com/r/oneplus/wiki/devices/one/brickguide
the strange thing is that i didnt cause this. The phone started randomly overheating and one time it just never booted up.

Getting a mistake when I try to flash the recovery via fastboot on my Nexus 4

Hey. I just flashed a stock rom and re-locked the bootloader, in order to unlock it, get twrp, get a custom rom (likely lineage) and root with magisk (it seems better than superSU, no?) without any toolkit, because i want to get some knowledge about android.
I downloaded adb and fastboot, enabled USB debugging, booted my nexus 4 on bootloader mode, and I used 3 commands after opening the command prompt from the folder containing fastboot. I also downloaded the latest img of TWRP for nexus 4 and renamed it "twrp" and put it on the folder.
The 3 commands I used are : "fastboot OEM unlock", "fastboot erase recovery", "fastboot flash recovery twrp.img"
But when the phone tries to boot the recovery, I get this : puu.sh/wWTjC/6cf11a9a32.jpg
and it doesnt work ofc.
Furthermore, I can't boot the ROM, I can only boot the recovery and the bootloader. When I try to boot the Rom, i get the recovery.
can someone help me please?
thanks

Hello,
The problem is that the recovery is unable to mount the /data partition, what you need to do is repair it by the following steps
1.Go to TWRP main screen
2.Press wipe
3.press advanced wipe
4.tick data
5.press repair and change file system
6.press repair
7.wipe the arrow
NOTE: this will format the data partition
now reboot to recovery again and check if the problem is fixed

Hello, the problem is I cant reach the main menu of TWRP, after getting what I screened, my phone reboots on TWRP again, and again...
I also tried the command "fastboot boot twrp.img" and i get the same result.

where did you get the twrp from ?
i would in such case as twrp is having troubles first try to find a working version of it, and it it didn't work i would reflash to stock stock and start from scratch

I got twrp there : dl.twrp.me/mako/
i took the latest version.

Get the cwm recovery for your device, wipe data , then try reflashing the twrp recovery

It's ok, thanks

nublord said:
It's ok, thanks
Click to expand...
Click to collapse
did that help ? hopefully?

hmm, I thought it did, but i actually get the same problem, and I can't launch neither cwm nor twrp..

Once yo reinstall twrp
Go to wipe the format data to remove encryption
You can also use cwm to flash the ROM

Lenovo TB-X605F twrp?

I was able to get the device rooted with the magisk boot image patch method, but I was seeing if I can get twrp?

turboperson123 said:
I was able to get the device rooted with the magisk boot image patch method, but I was seeing if I can get twrp?
Click to expand...
Click to collapse
Could you link me to the method you used for root please?
Sent from my God Mode 8

Hi
I'm highly interested too. Could you share the method please?
Do you manage to install twrp?
Thanks!

Hello,
How do you do to unlock bootloader.I was able to download and patch with magisk the last ROM but I can't flash it !
Please would you tell us how you do that ?
Thanks

here is the link https://forum.xda-developers.com/ge...agisk-root-t3992477/post80692227#post80692227

Thank you !

go to settings and enable developer options, then go to developer options / enable usb debugging and enable oem unlock
then on pc if you have adb and fastboot installed then type adb reboot bootloader
then once the tablet is in fastboot type fastboot oem unlock-go to unlock the bootloader

TWRP 3.3.1-0 TB-X605F Lenovo Smart Tab M10
i used the twrp port from stock recovery method here https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
"warning this will wipe data, bootloader needs to be unlocked, computer has adb and fastboot installed"
1. download twrp from here http://www.mediafire.com/file/tn7csi4gzm91w7v/twrp-3.3.1-0-X605F.img/file
2. then on the tablet go to settings / Developer mode / usb debugging
3. connect the tablet to pc with usb cable then on the tablet you will see usb debugging authorizations, click on allow always to make the device debuggable
4. on pc launch command prompt then type "adb reboot bootloader" to reboot into bootloader
5. once in bootloader type "fastboot flash recovery "the directory of the twrp-recovery.img" once flashed then type "fastboot reboot"
6. once tablet rebooted type "adb reboot recovery" on pc to reboot into recovery, warning you will see /data mounting errors to fix this on the tablet go to wipe / format data and type yes to format data, then go back to main screen then go to reboot / recovery to reboot back into recovery.
7. on pc download dm-verity-forceencryption zip file here http://www.mediafire.com/file/ndhe4ewlzlffdur/Disable-dm-verity-forceencryption.zip/file then on the tablet go to advanced / adb sideload then swipe it, then on pc type "adb sideload the directory where you put the zip file" once flashed then go to the main screen then go to reboot / system to reboot system
then it should boot up.

Working fine from my side

Turbo, many Thanks!
It works perfectly ! ?

turboperson123 said:
i used the twrp port from stock recovery method here https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
"warning this will wipe data, bootloader needs to be unlocked, computer has adb and fastboot installed"
1. download twrp from here http://www.mediafire.com/file/tn7csi4gzm91w7v/twrp-3.3.1-0-X605F.img/file
2. then on the tablet go to settings / Developer mode / usb debugging
3. connect the tablet to pc with usb cable then on the tablet you will see usb debugging authorizations, click on allow always to make the device debuggable
4. on pc launch command prompt then type "adb reboot bootloader" to reboot into bootloader
5. once in bootloader type "fastboot flash recovery "the directory of the twrp-recovery.img" once flashed then type "fastboot reboot"
6. once tablet rebooted type "adb reboot recovery" on pc to reboot into recovery, warning you will see /data mounting errors to fix this on the tablet go to wipe / format data and type yes to format data, then go back to main screen then go to reboot / recovery to reboot back into recovery.
7. on pc download dm-verity-forceencryption zip file here http://www.mediafire.com/file/ndhe4ewlzlffdur/Disable-dm-verity-forceencryption.zip/file then on the tablet go to advanced / adb sideload then swipe it, then on pc type "adb sideload the directory where you put the zip file" once flashed then go to the main screen then go to reboot / system to reboot system
then it should boot up.
Click to expand...
Click to collapse
Good job, @turboperson123 ! @Monpseud0 pointed me over here.
I've got some time this week & I'm going to start on a version that will handle encryption. You can find the device tree and code here. I've included a link to this thread.

I bricked my device. Rebooting the system from TWRP only gets me back into TWRP.
Am afraid I will have to flash a new rom.
Does anyone know where to download a working rom for TB-X065F
Help much appreciated.

stefankkl said:
I bricked my device. Rebooting the system from TWRP only gets me back into TWRP.
Am afraid I will have to flash a new rom.
Does anyone know where to download a working rom for TB-X065F
Help much appreciated.
Click to expand...
Click to collapse
Easiest thing to do is use LMSA. It's available on Lenovo's support page: https://pcsupport.lenovo.com/au/en/...r-list/component?name=Software and Utilities.

Still unable to re-flash stock ROM
Yahoo Mike said:
Easiest thing to do is use LMSA. It's available on Lenovo's support page:
Click to expand...
Click to collapse
I can download the ROM through LMSA, but not flash it.
Trying to do so yields a "complete" message from LMSA after only a few seconds, but then rebooting the device only gets me back into TWRP.
I also tried to flash all system_xx.img from the ROM using fastboot flash system system_xx.img ,
and to flash all vendor_xx.img from the ROM using fastboot flash vendor vendor_xx.img.
Fastboot performs this operation, but then rebooting gets me back into TWRP again.
Trying to reboot the system from TWRP yields the message "no system installed"
Help much appreciated.

stefankkl said:
I can download the ROM through LMSA, but not flash it.
Trying to do so yields a "complete" message from LMSA after only a few seconds, but then rebooting the device only gets me back into TWRP.
I also tried to flash all system_xx.img from the ROM using fastboot flash system system_xx.img ,
and to flash all vendor_xx.img from the ROM using fastboot flash vendor vendor_xx.img.
Fastboot performs this operation, but then rebooting gets me back into TWRP again.
Trying to reboot the system from TWRP yields the message "no system installed"
Help much appreciated.
Click to expand...
Click to collapse
Tough one! Try this. It will wipe your data partition, though.
If it will let you, power down the tablet for about 10mins. Then boot into TWRP. Go to "Wipe" and swipe for Data/Factory Reset. Reboot.
If the M10 still won't boot, in TWRP re-format Data (by typing 'yes' under Wipe->Format Data), and wipe cache and Dalvik Cache. I think dalvik is under Wipe->Advanced. Factory reset again. Reboot.
As an absolute last resort, you might try fixing permissions in TWRP under "Advanced". But I don't think that's going to do much, because you haven't booted the ROM successfully yet.
Hope one of these works for you. Let us know what worked for you. If nothing works, PM me and we'll try some other things.

Lenovo Logo THEN black screen -- DEAD
turboperson123 said:
6. once tablet rebooted type "adb reboot recovery" on pc to reboot into recovery, warning you will see /data mounting errors to fix this on the tablet go to wipe / format data and type yes to format data, then go back to main screen then go to reboot / recovery to reboot back into recovery.
7. on pc download dm-verity-forceencryption zip file here then on the tablet go to advanced / adb sideload then swipe it, then on pc type "adb sideload the directory where you put the zip file" once flashed then go to the main screen then go to reboot / system to reboot system
then it should boot up.
Click to expand...
Click to collapse
I followed the instructions but on the last step of rebooting to system the device restarts, shows the Lenovo logo then it goes to a black / blanks screen. It appears to have shut down. I must hold the power button for several seconds before it wakes up (or restarts?) and does this all over again -- shows the Lenovo logo then black screen.
For the record the device was already rooted with Magisk. I was just trying to do a TWRP backup but found /data mounting errors so tried following steps 6 & 7. At the moment the device refuses to boot up. I am unable to get back into Recovery Mode. The ONLY thing i can do is get into FASTBOOT mode and issue commands from CLI.
The following hardware key combos produce the same results -- tablet turns on to show the Lenovo logo, after a few seconds the screen goes black (the device appears to have turned off):
x Power key
x Power Key + Volume Down
x Power Key + Volume Up
x Power Key + Volume Up + Volume Down
** Release of keys is done once Lenovo logo appears
Any ideas?
UPDATE
I went ahead and performed: fastboot flash boot boot.img << the boot.img was the earlier patched magisk image i used to get the rooted working tablet.
After performing the above the tablet turned on and is now showing the Lenovo logo however it does nothing else --- it remains on the logo forever. I am able to get into TWRP recovery. I went ahead and wiped Dalvik, Cache, and Data. Rebooted to System but still it is stuck on the Lenovo Logo.
The device if fully charged.

crosis99 said:
I followed the instructions but on the last step of rebooting to system the device restarts, shows the Lenovo logo then it goes to a black / blanks screen. It appears to have shut down. I must hold the power button for several seconds before it wakes up (or restarts?) and does this all over again -- shows the Lenovo logo then black screen.
Any ideas?
Click to expand...
Click to collapse
You could try recovering the tablet with LMSA. See this post. You'll lose all your existing data and setup on the tablet, though.
Not sure what went wrong for you. Do you have a TB-X605F with Snapdragon 450 SOC? The existing TWRP is only for the SDA450. I'm working on one for the M10s with SDA429.

Yahoo Mike said:
You could try recovering the tablet with LMSA. See this post. You'll lose all your existing data and setup on the tablet, though.
Not sure what went wrong for you. Do you have a TB-X605F with Snapdragon 450 SOC? The existing TWRP is only for the SDA450. I'm working on one for the M10s with SDA429.
Click to expand...
Click to collapse
Thanks for the response. Yes mine has the Snapdragon 450. I will investigate the LMSA. Been messing around all day but made no progress -- not even QPST is working out.

(Closed)<Fixed> Honor 8 emui 8 android oreo brick ( software i guess )

Hello everyone, i have an honor 8 frd-l09c432(europe)
so i flashed a wrong kernel in twrp and fastboot
and now the phone can't boot
i can get into fastboot and flash stuff
erecovery works in factory resetting and cache partition cleaning
my bootloader is unlocked
my phone is frp unlocked
when i flash twrp in fastboot and reboot to recovery, it doesn't boot twrp but the stock recovery ( idk why )
so anyone can help ?
and when i put my phone in charge when its off
a message appears to update again
no : 10 ( boot image
no : 2 ( load failed )
which im guessing its because of the wrong kernel flash
so what should i flash in fastboot to unbrick my phone ?
i have update.app extracted and etc ... ( please please if anyone can help )

OPTION 1: MAYBE MIGHT BE WHY FLASHING MIGHT NOT BE WORKING
Make sure that you are not trying to flash the recovery.img on the error fastboot look alike screen, because I dont think you can flash files when on that screen error screen. Try to boot into fastboot without the errors on the screen.
OPTION 2: FLASH STOCK KERNEL IMAGE
You can flash kernel images using adb:
"fastboot flash kernel [KERNEL.IMG]"
Make sure that you are not trying to flash the recovery.img on the error fastboot look alike screen, because I dont think you can flash files when on that screen error screen.
OPTION 3: IF YOU WANT TO BOOT INTO TWRP WITHOUT FLASHING
1. Connect device to computer and boot into fastboot, make sure that you are not on the error fastboot look alike screen because I dont think you can flash files when on that screen error screen.
2. On adb, do "fastboot boot [Recovery File]"
3. It should boot into the recovery file you put in there
OPTION 4:: RESET DEVICE FROM ERECOVERY FROM "recovery2"
If those did not work, restart you device and when it says "Your device has been unlocked and can't be trusted", quickly hold volume up until you have booted into a stock recovery look alike "recovery2", which has an extra button.If you do not have the button, you need to hold the volume up button faster on the "Your device has been unlocked and can't be trusted" screen. When on the stock recovery look alike screen,, click the option that says something about download latest firmware. Select your wifi and it should download stock oreo and fix device, but though, it will factory reset device.
The Honor 8 has 2 recoveries called maybe "recovery" where you usually flash twrp and "recovery2" when you hold the volume button up on "Your device has been unlocked and can't be trusted"
The bootloader should relock after this
if you manage to boot into twrp and reflash back to the kernel then you dont have to do this.

CHECK_123 said:
OPTION 1: MAYBE MIGHT BE WHY FLASHING MIGHT NOT BE WORKING
Make sure that you are not trying to flash the recovery.img on the error fastboot look alike screen, because I dont think you can flash files when on that screen error screen. Try to boot into fastboot without the errors on the screen.
OPTION 2: FLASH STOCK KERNEL IMAGE
You can flash kernel images using adb:
"fastboot flash kernel [KERNEL.IMG]"
Make sure that you are not trying to flash the recovery.img on the error fastboot look alike screen, because I dont think you can flash files when on that screen error screen.
OPTION 3: IF YOU WANT TO BOOT INTO TWRP WITHOUT FLASHING
1. Connect device to computer and boot into fastboot, make sure that you are not on the error fastboot look alike screen because I dont think you can flash files when on that screen error screen.
2. On adb, do "fastboot boot [Recovery File]"
3. It should boot into the recovery file you put in there
OPTION 4:: RESET DEVICE FROM ERECOVERY FROM "recovery2"
If those did not work, restart you device and when it says "Your device has been unlocked and can't be trusted", quickly hold volume up until you have booted into a stock recovery look alike "recovery2", which has an extra button.If you do not have the button, you need to hold the volume up button faster on the "Your device has been unlocked and can't be trusted" screen. When on the stock recovery look alike screen,, click the option that says something about download latest firmware. Select your wifi and it should download stock oreo and fix device, but though, it will factory reset device.
The Honor 8 has 2 recoveries called maybe "recovery" where you usually flash twrp and "recovery2" when you hold the volume button up on "Your device has been unlocked and can't be trusted"
The bootloader should relock after this
if you manage to boot into twrp and reflash back to the kernel then you dont have to do this.
Click to expand...
Click to collapse
Hi, Thanks for the fully informative reply
I got my phone unbricked a week after this thread but somehow i completely forgot to close the thread
so, sorry about my mistake, I'm new to xda
have a nice day