Xperience G5 Kernel
Code:
#include
/*
* Your warranty is now void *
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Install:
1.) Download the zip file
2.) Make a backup
3.) Flash kernel in TWRP (dont use fastboot because some needed libs wont be copied)
4.) When you disabled the device encryption flash no-dm-verity again
Features:
- Don't breaks Safetynet when Bootloader is unlocked (rooting will break safetynet)
- more CPU Governors
- TCP congestion Westwood
CREDITS
@alucard_24 - for the very good buildscript and some fixes
Version Information
Status: Beta
Compatible Roms: Stockbased Roms only
Download Link:Klick me Hard
Sourcecode: https://github.com/mericon/Xp_Kernel_LGH850
Created: 11.11.2016
Updated: 24.11.2016
Paused since: 26.11.2016
Statement:
I have to pause the Development for the next time. My work takes to much time for now. I think i will resume in the next year.
Code:
[U][B]Changelog:[/B][/U]
[U]First Release V 0.1:
[/U]
[B]- [/B]Don't breaks Safetynet when Bootloader is unlocked
[B]- [/B]more CPU Governors ([STRIKE]ElementalX and[/STRIKE] Impulse)
- TCP congestion Westwood (works now)
- sioplus iosched
- Moved core control in to the kernel (should help to save some power)
[U]v0.2[/u]
- Added Zen iosched
- disabled core ctl helper
[U]v0.3[/u]
- Added SIO iosched
- Added FIOPS iosched
- Added Builtin ExFat support
[U]V0.4[/U]
- Disabled Core Ctl
- enabled Core Ctl helper
- Adding Zzmove Governor
- Adding back ElementalX Governor
Kernel is ready to download now :] feel free to test it
Gesendet von meinem Pixel XL mit Tapatalk
mericon said:
Kernel is ready to download now :] feel free to test it
Gesendet von meinem Pixel XL mit Tapatalk
Click to expand...
Click to collapse
For some reason it is stuck at boot. Not even getting to the boot animation. Left my phone for 5 minutes, still the same.
onestyle007 said:
For some reason it is stuck at boot. Not even getting to the boot animation. Left my phone for 5 minutes, still the same.
Click to expand...
Click to collapse
Which rom do you use?
I will look in this
mericon said:
Which rom do you use?
I will look in this
Click to expand...
Click to collapse
Fluence HD 25 patched over O3 rom with dual boot patcher (updated ramdisk through dual patcher app on primary rom). My guess is its because of my patched ramdisk.
onestyle007 said:
Fluence HD 25 patched over O3 rom with dual boot patcher (updated ramdisk through dual patcher app on primary rom). My guess is its because of my patched ramdisk.
Click to expand...
Click to collapse
Okay thats could be. Atm im doing a Full fresh install of my Phone and than i will try the dualPatcher. If the patcher is the problem i try to figure out what the problem is but this could take some days.
mericon said:
Okay thats could be. Atm im doing a Full fresh install of my Phone and than i will try the dualPatcher. If the patcher is the problem i try to figure out what the problem is but this could take some days.
Click to expand...
Click to collapse
Patcher was the problem. I was to eager to try your kernel and forgot to patch it for Primary ROM. Now it works but I've lost root. No su detected, since I was on systemless root.
onestyle007 said:
Patcher was the problem. I was to eager to try your kernel and forgot to patch it for Primary ROM. Now it works but I've lost root. No su detected, since I was on systemless root.
Click to expand...
Click to collapse
Well i forgot to mention that it isnt a rooted kernel for now sorry. But nice to now that the kernel works for you.
mericon said:
Well i forgot to mention that it isnt a rooted kernel for now sorry. But nice to now that the kernel works for you.
Click to expand...
Click to collapse
Which governor's did you put in? It's cool,flashed already and rooted again. I'm asking since I only get elementalX and impulse as new and seems no Westwood in tcp. Seems I've made a big mess with patching my ramdisk lol.
onestyle007 said:
Which governor's did you put in? It's cool,flashed already and rooted again. I'm asking since I only get elementalX and impulse as new and seems no Westwood in tcp. Seems I've made a big mess with patching my ramdisk lol.
Click to expand...
Click to collapse
Atm its only Impulse and ElementalX for CPU and for TCP Westwood should be default for the networking.
Planned are some IO-Sched's and maybe zz_move bigLittle and maybe kcal for now.
mericon said:
Atm its only Impulse and ElementalX for CPU and for TCP Westwood should be default for the networking.
Planned are some IO-Sched's and maybe zz_move bigLittle and maybe kcal for now.
Click to expand...
Click to collapse
Got both of them in cpu but have this in tcp, look at the pic. Just a question, but did you consider multirom support at some point?
I assume this is for LG roms and not CM or anything else? If I ever move back to stock, I will deff have to test this out. Thanks!
onestyle007 said:
Got both of them in cpu but have this in tcp, look at the pic. Just a question, but did you consider multirom support at some point?
Click to expand...
Click to collapse
Than i have to take a look at the westwood problem thanks
I will look what i can do for multirom but it will take some time because i didnt work in Development a long time and have to learn it mostly new and on the other side is my work 8 hours a day and my familiy
davitox87 said:
I assume this is for LG roms and not CM or anything else? If I ever move back to stock, I will deff have to test this out. Thanks!
Click to expand...
Click to collapse
You are right its for LG roms only (i think didnt test if it works with an CM rom and wouldnt recommend it). Maybe when the Kernel is at an stable stage i try to build one for CM.
mericon said:
Than i have to take a look at the westwood problem thanks
I will look what i can do for multirom but it will take some time because i didnt work in Development a long time and have to learn it mostly new and on the other side is my work 8 hours a day and my familiy
Click to expand...
Click to collapse
Same here,trying to find time for tons of projects I've started on my pc. Well I'm pretty new in kernel developing, but if you need help, I learn pretty fast
onestyle007 said:
Same here,trying to find time for tons of projects I've started on my pc. Well I'm pretty new in kernel developing, but if you need help, I learn pretty fast
Click to expand...
Click to collapse
Feel free to help
I think i found the problem with westwood, A new zip comes tomorrow.
awesome work!!! any chance we'll see this on h830 as well? really want to get a kernel that will pass the safety net boodloader check
please build by UBER 5.4.1 like boeffla kernel for better performance
https://www.mediafire.com/folder/r9l07voht8ets/cyanogenmod13.0#rhtzub5gx1hb9
@mericon
Using your kernel since last night on Impulse governor, really big battery improvement compared to the stock kernel ,and not really losing performance. Great work mate. :good:
ggelo10 said:
please build by UBER 5.4.1 like boeffla kernel for better performance
https://www.mediafire.com/folder/r9l07voht8ets/cyanogenmod13.0#rhtzub5gx1hb9
Click to expand...
Click to collapse
Well be careful with compilation errors...
Envoyé de mon GT-I9505 en utilisant Tapatalk
Related
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your already voided warranty is now void again.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh my *** off at you.
* Really hard.
*/
Yo! This thread contains two kernels (regular and SuperLite). If you wanna see what SuperLite is, then go here. You should read everything before moving onto the downloads section.
Hiya fellas.
This is my modded kernel for our loved Moto G 1st gen. In the beginning I decided to keep it for my personal use only, but then I decided to share it with you guys since there was no custom kernel compatible with the 5.1 stock rom.
Features:
Sources & Optimizations
- Based on Motorola's shared falcon/peregrine source
- Compiled with generic Linaro 5.3 toolchain
- Compiled with -O3 optimization & some more flags (e.g. Pipe flag)
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- Ye Olde MPDecision
- AutoSMP
Click to expand...
Click to collapse
Extra CPU Governors
- Bioshock
- Dancedance
- Impulse
- Lionheart
- Smartmax
- Yankactive
- Yankdemand
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen (Default)
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- State Notifier driver
- Adreno Idler
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- HID Driver (Use your phone as a USB keyboard/mouse)
- Compass & Accelerometer drivers now use State Notifier
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Regular Version
Overclock-Ready Version
Click to expand...
Click to collapse
Looking for previous releases?
- All releases until 1.2.3: Go here
- All releases from 1.3 onwards: Go here
- KaminariLite (discontinued): Go here
- KaminariSL (previously Optimized Stock): Go here
Click to expand...
Click to collapse
Got into trouble and need to go back to the stock kernel?
Then you should click this link here, bud!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage (This is very important! If you flash the zip from a subfolder, you'll be left without wi-fi!!!)
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- (Optional) Wipe cache and/or ART cache
- Reboot and have fun!
Coming from another kernel? Then I suggest you to (at least!!!) dirty flash your stock rom and kernel in order to avoid any issues!
Wanna tweak it? Use Kernel Adiutor! (I do NOT support Synapse!!!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo, for putting up them sources
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @Aayushya, he provided the initial cherry-picks
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @Alberto97, for the Linux version bumps (.43 up to .109)
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (Lollipop-Falcon), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/tree/L
Kernel Special Features: Read above!!!
Version Information
Status: Stable
Current Stable Version: R3
Stable Release Date: 2016-07-07
Created 2015-09-07
Last Updated 2016-07-09
F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Read the OP.
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: Go here for that.
Q: Will this kernel work on the GPE ROM?
A: Yes. And it'll also allow you to use this ROM without having to format /data to ext4.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. For Synapse, scroll up and read the OP first.
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Click to expand...
Click to collapse
Kaminari SuperLite (previously "Optimized Stock Kernel")
Since KaminariLite has been discontinued, and Kaminari has become cleaner regarding features, I've been working on a version closer to the stock kernel, only more optimized.
Enter Kaminari SuperLite!
Diferences between this & the stock kernel:
- Compiled using generic Linaro 5.3 toolchain
- Bumped to Linux version 3.4.112
- Compiled with -O3 and misc optimization flags flags (Same as Kaminari)
- Most if not all of Kaminari's optimizations have been applied
- All governors except Interactive removed
- Supports both stock and GPE roms, regardless of filesystem (f2fs or ext4) used on /data
- Adds init.d support
- Default ZRAM size changed to 400MB
Click to expand...
Click to collapse
Differences between this & Kaminari:
- All governors except Interactive removed
- AutoSMP removed
- All TCP congestion algorithms except Westwood and Reno removed
- Additional I/O schedulers (zen, vr, sio, fiops, bfq) removed
- All non-essential features (FauxSound, Kcal, Dt2w...) have been removed
- Stock PowerHAL has been re-enabled
- Compressed using LZO (Kaminari uses XZ)
Click to expand...
Click to collapse
Wanna give it a try?
Click this link here!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions:
Same as Kaminari.
Coming from regular Kaminari? Wipe your Kernel Adiutor data first! If you can flash the stock kernel before flashing this, it's even better!
Click to expand...
Click to collapse
Reserved!!!
Reserved again
null
Wow m first...
---------- Post added at 08:25 AM ---------- Previous post was at 08:17 AM ----------
Just flashed it...buttery smooth...smartmax works like charm and yeah happy to see the kcal screen control...thanks kaminari for this amazing kernel...
So it is only for stock 5.1 right?
Edit: Working smoothly on stock 5.1
Keep it up.
Working great on XT1031 with stock 5.1. Nice job!
@kingkaminari thanks for kernel. Any chance in future to add support for Aosp roms? that would be great.
Sent from my Moto G using Tapatalk
akshayk01 said:
@kingkaminari thanks for kernel. Any chance in future to add support for Aosp roms? that would be great.
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
No, no plans for aosp/cm support yet - mainly because of my limited knowledge. But i'll consider making a version supporting these two
New build in the works! Just trying to fix a bug where all CPU cores stay online (needless to say that this causes a gigantic battery drain)
New build up!
https://www.androidfilehost.com/?fid=24052804347811341
https://www.androidfilehost.com/?fid=24052804347811344 - "Mori" version - with S2W/DT2W
Changelog here.
I'm getting an update binary execution error with TWRP, with both new builds. I tried disabling the device check in the anykernel.sh but no go. Also, I noticed in the init.kaminari.rc file in the zip, there is a typo in the power mode lines. It has 2 lines for cpu2 and none for cpu3. I just noticed the same thing with Optimus V41 Prime earlier today.
amarc78 said:
I'm getting an update binary execution error with TWRP, with both new builds. I tried disabling the device check in the anykernel.sh but no go. Also, I noticed in the init.kaminari.rc file in the zip, there is a typo in the power mode lines. It has 2 lines for cpu2 and none for cpu3. I just noticed the same thing with Optimus V41 Prime earlier today.
Click to expand...
Click to collapse
The previous zips i made here worked fine (i flash them through adb sideload). And i just fixed the init.kaminari.sh. Plus i've fixed s2w/s2s in the Mori version (dt2w is still partly broken though).
New build up!
Version: 0.96b
Download: Regular Version | "Mori" Version (DT2W)
Changelog here, but for those who don't wanna go there:
- Fixed s2w (dt2w halfscreen is still broken)
- Fixed derp in init.kaminari.sh
GPE users, please test my builds if you can / feel courageous enough to do it
I give up, except for the first build, they won't flash in recovery for me.
amarc78 said:
I give up, except for the first build, they won't flash in recovery for me.
Click to expand...
Click to collapse
I'll upload a zip without anykernel later. Btw, which version of twrp are you on? And do you have sufficient space in /system? Because this kernel pushes modules to it. I'm on twrp 2.8.7.0 + a modified stock rom, and i've had zero flashing errors so far
For those who are having problems with anykernel, i've uploaded special flashable zips without it.
Version is still 0.96b.
Downloads: Regular | DT2W
Version 096b flashed without any problems.
Just put the zip in the root of internal storage.
cool everything is just superb @kingkaminari hope you keep updating this kernel
This project is no longer being maintained. I'm no longer developing for the G1/G2 family.
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now more void than it already was.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if that gets you in trouble, it's entirely your fault. [STRIKE]Might be my fault as well, because I'm not a developer, but I don't care. lol[/STRIKE]
*/
Hiya fellas.
This is a sister project to my original (and ridiculously outdated) kernel for stock ROMs only. The version in this thread is the one designed to work with anything that isn't the stock firmware, i.e., AOSP, AospExtended, LineageOS, Resurrection Remix,... You name it. Even MIUI, which can be a b**** to get custom kernels supported on.
Features:
Sources & Optimizations
- Based on Lineage's shared falcon/peregrine/titan/thea sources
- Compiled with Linaro 4.9
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- MSM Hotplug
Click to expand...
Click to collapse
Extra CPU Governors
- Impulse
- Smartmax
- Yankactive
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- Simple GPU Algorithm
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- CPU Overclock (up to 1.6 GHz) (Overclocked version only)
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Unified Marshmallow & Nougat (CM/LineageOS 13 & 14.x)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna "tweak ALL the things", use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (AOSP/LineageOS, Falcon), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: R12
Stable Release Date: 2018-03-04
Created 2016-01-13
Last Updated 2018-05-17
F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Because I wanted to
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: Works on any ROM as long as it isn't stock . So yes, it does. AOSP, CM LineageOS, RR... Any of these.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. No Synapse support!
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Click to expand...
Click to collapse
Reserved
Reserved
Okay... Last reserved.
Our first test build is up! Link is at the OP.
It's still a very early test build and it may (and probably does) contain issues (serious or not). You've been warned.
This build should fix PowerHAL not being disabled.
Great work. Zero bugs in the short time since flashing. Thanks.
Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari
BhavikRB said:
Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari
Click to expand...
Click to collapse
MPDecision.
Sir King Kami Nari ,
Have you modified Interactive ?
kingkaminari said:
Created 2016-01-13
Last Updated 2016-01-12
Click to expand...
Click to collapse
Lol? xd
So far so good with the kernel thanks!
@kingkaminari Wow, finally! flashing it right now, thank you so much!
I hope to see the rest of the features present on 5.1 here on M and Thank you so much!
@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)
espaciox99 said:
Lol? xd
So far so good with the kernel thanks!
Click to expand...
Click to collapse
Yeah . There's this little derp with the dates lol
espaciox99 said:
@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)
Click to expand...
Click to collapse
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision
BhavikRB said:
Sir King Kami Nari ,
Have you modified Interactive ?
Click to expand...
Click to collapse
No. Interactive has been left untouched.
If you come from Hurtsky's Hybrid Kernel or Flashhhh's Optimus Kernel, don't forget to re-enable MPDecision - just rename /system/bin/mpdecisionbak to /system/bin/mpdecision.
kingkaminari said:
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision
Click to expand...
Click to collapse
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen
espaciox99 said:
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen
Click to expand...
Click to collapse
I actually was having a similar problem to this not long ago but not this particular kernel.
Just fooling around I found that if I flashed any kernel after rebooting system I would have the problem you described, however if I flashed the ROM, Gapps, and kernel in recovery all together before initial boot everything works as it should.
Not sure why this is but I have experimented and it is the only solution I have found so far.
DevElite Kernel
Three, Bigger and Better
Features and Changelogs:
Code:
Three:
PDesireAudio 11.0 included
Included Maple I/O Scheduler and set as default
Replaced sched governor with own pdesiresched governor
Adreno Idler included
Replaced msm_performance with Lazyplug
Fastcharge driver included
Some CVE Security Patches
Many many new patches for percpu, cpufreq and irq_work
Miscellaneous patches and improvements
Two:
E6853 Problems fixed
SafetyNet patched
Improved Memory Performance by up to 15%
KCAL Color Control added
Little Scheduler improvement
More Optimized for big.LITTLE
Compiled with Linaro GCC 7.1.1
pstore ramoops fixed
Misc Patches and Improvements
One:
Energy Aware Scheduling (EAS)
Zen Scheduler added and set as default
Westwood TCP congesition Algorithm added and set as default
sched Governor included and set as default (I would not change it either)
KSM disabled by default
PDesireAudio 10.1 Audio Enhancements included
Adaptive Low Memory Killer enabled by default
Blocking some wakelocks to improve battery
TWRP included
(Not too much features yet because EAS took a long time to implement)
-------------------------------------------------
What does make that Kernel special?
This is literally the first kernel with Energy Aware Scheduling for Sony Xperia.
It took weeks to make anything working but the work was worth at the end
-------------------------------------------------
Requirements:
You just need these things:
A Xperia Z5 Premium
TWRP Recovery
-------------------------------------------------
How to install my Kernel?
It's truly easy:
Download the Zip on Download section (Second Post)
Reboot into Recovery
Flash the downloaded Zip
It will do by itself all what you need
-------------------------------------------------
Source Code/Repositories?
Take a look here:
https://github.com/PDesire/XperiaSatsukiEliteKernel
-------------------------------------------------
FAQ:
Why does my CPU behave so kinda weird?
Well EAS is different than what we normally know (HMP), if you think the CPU behavior is abnormal, it is just because EAS does handle tasks differently
My device got hard bricked, do you fix it for me?
It's a Kernel so you have to be responsible for any damages!
But it should not damage your phone.
-------------------------------------------------
Credits:
Honestly the Biggest Credits goes to Team DevElite for their wonderful help
Special thanks to:
@RyTekk
@zacharias.maladroit
@_LLJY
If i forgot someone please tell me and I will add
XDA:DevDB Information
DevElite Kernel, Kernel for the Sony Xperia Z5 Premium
Contributors
PDesire
Source Code: https://github.com/PDesire/XperiaSatsukiEliteKernel
Kernel Special Features:
Version Information
Status: Stable
Created 2017-06-13
Last Updated 2017-07-22
Downloads:
Kernel:
New:
Three:
Single Sim: https://goo.gl/pR5qni
Dual Sim: https://goo.gl/JLzmLJ
Two:
Single Sim: https://goo.gl/UH7ztq
Dual Sim: https://goo.gl/xM1jz1
One:
Single Sim: https://goo.gl/vQc6l4
!!!!Seems something is broken, just boot.img inside zip works, not the script!!!
Dual Sim: https://goo.gl/wMeaXV
-------------------------------------------
Old:
No old Releases yet
bootloop! crash in bootanimation , have z5p e6853 stock firmware
anjelz2012 said:
bootloop! crash in bootanimation , have z5p e6853 stock firmware
Click to expand...
Click to collapse
Wait what ? Okay weird. Will take a look on it. Which android FW you use ?
Your PDesire
PDesire said:
Wait what ? Okay weird. Will take a look on it. Which android FW you use ?
Your PDesire
Click to expand...
Click to collapse
32.3.A.2.33
Booted just fine on my E6883, will test for sometime, & let you know of how it behaves. Thanks again for your much hard work of not letting our Z5 Premium die!!
Okay, it definitely runs cooler, I rebooted several times already, & its not as hot at stock would be. But I think that's cause of all the big cores being turn off, that's the behaviour I noticed after the phone booted.
Also, is it normal that two big cores always remain active? In stock, only one does. You should maybe educate a little more on what to expect with this kernel.
Okay, after a bit of a settling, its back to one big core always active like stock behaviour.
And by the way, SafetyNet doesn't pass with Magisk, I use Magisk v12 with Magisk root. Hope in the future something can be done here.
I know it's just the first release & I might be bugging you with the requests, but I noticed the boot time is a bit longer than the usual stock. And if at all this is possible, could you reduce the backlight during boot like in Zach's SunKernel?
And would I be losing the Energy Aware Scheduling if I switch to Interactive governor for both Big & Little cores?
I don't really understand the hot plugging of this kernel, sometimes all big cores are active, sometimes 3, 2, stock like 1, sometimes none. I mean, wouldn't it drain battery to constantly switch big cores on & off. It doesn't overheat, it stays cool as said though.
anjelz2012 said:
32.3.A.2.33
Click to expand...
Click to collapse
Could you send me your init.qcom.post_boot.sh file maybe located at /system/etc?
Thanks
Your PDesire
Christian Fleming said:
Booted just fine on my E6883, will test for sometime, & let you know of how it behaves. Thanks again for your much hard work of not letting our Z5 Premium die!!
Okay, it definitely runs cooler, I rebooted several times already, & its not as hot at stock would be. But I think that's cause of all the big cores being turn off, that's the behaviour I noticed after the phone booted.
Also, is it normal that two big cores always remain active? In stock, only one does. You should maybe educate a little more on what to expect with this kernel.
Okay, after a bit of a settling, its back to one big core always active like stock behaviour.
And by the way, SafetyNet doesn't pass with Magisk, I use Magisk v12 with Magisk root. Hope in the future something can be done here.
I know it's just the first release & I might be bugging you with the requests, but I noticed the boot time is a bit longer than the usual stock. And if at all this is possible, could you reduce the backlight during boot like in Zach's SunKernel?
And would I be losing the Energy Aware Scheduling if I switch to Interactive governor for both Big & Little cores?
Click to expand...
Click to collapse
SafetyNet I will patch soon. Right now the bootstate is on orange which I need to patch soon
About the boot time: that's because... Well EAS and performance governor (which is used on boot) aren't best friends sometimes
The Brightness dimm on boot is no problem :good:
You don't lose EAS if you use it... Just interactive is optimized for HMP, so some laggs can exist
Your PDesire
@PDesire thanks for the great work
Only one question, do drm related stuff work with this kernel?
Edit: just tried installing and it booted without any problem! X-reality seems to work correctly!
Daniel_GB said:
@PDesire thanks for the great work
Only one question, do drm related stuff work with this kernel?
Click to expand...
Click to collapse
OHH yes it does
Your PDesire
will you made a custome rom in future?
How can I root while using this kernel?
PDesire said:
Could you send me your init.qcom.post_boot.sh file maybe located at /system/etc?
Thanks
Your PDesire
Click to expand...
Click to collapse
https://mega.nz/#!2BIwUKzK!VfUGkgMLrDjP8X7Rl_41VQNXxM460YBzx-Gn1TfpBEg
FiDra said:
How can I root while using this kernel?
Click to expand...
Click to collapse
Magisk
Your PDesire
pandan80 said:
will you made a custome rom in future?
Click to expand...
Click to collapse
Why that question?
Your PDesire
What you can already expect on next version:
-glibc memcopy and string for 15% more memory performance
-SafetyNet bypass
-Little Scheduler improvements
A little question now guys:
Do you need one of these things urgently:
KCAL
Sound Control
More governors
If there's a huge request for them I will try to add
Your PDesire
PDesire said:
What you can already expect on next version:
-glibc memcopy and string for 15% more memory performance
-SafetyNet bypass
-Little Scheduler improvements
A little question now guys:
Do you need one of these things urgently:
KCAL
Sound Control
More governors
If there's a huge request for them I will try to add
Your PDesire
Click to expand...
Click to collapse
hi gj
please first added kcal
PDesire said:
What you can already expect on next version:
-glibc memcopy and string for 15% more memory performance
-SafetyNet bypass
-Little Scheduler improvements
A little question now guys:
Do you need one of these things urgently:
KCAL
Sound Control
More governors
If there's a huge request for them I will try to add
Your PDesire
Click to expand...
Click to collapse
Those are interesting feature to have along side EAS!
More governors are always welcome.
thanks for the great work! using for an hour and everything seems OK!
Rooted with Magisk12
Lineage?
Can i use this on lineage or is this a stock only?
Hi guys,
I know that this forum is not widely used by ZTE Axon 7 Mini owners, but I still want to share my work the kernel used by the stock firmware.
Most of the parts were of course already based on the work of others, so I will give credits at the end of this thread of course.
Pre-requisites:
Unlocked bootloader
TWRP flashed
Knowledge you do this all at your own risk! I tested this kernel with my EU model, so I don't know if this will work on the US models, too.
Features:
- Based on latest kernel source shared by ZTE (ZTE B2017G Nougat(7.1.1) Kernel(3.10.84))
- Built with GCC 4.9 toolchain
- UC to 499MHz for BIG and 403 MHz for LITTLE (thanks to @flar2)
- OC to 1651 for BIG (again @flar2)
- Additional governors: yankactive, blu-active, impulse
- Additional IO schedulers: Sioplus, Zen, FIOPS. Tweaked Row is set as default
- Additional TCP congestion algorithms with westwood being the default one
- Approx. 30% faster due to CRC calculation and auditing disabling
- Sweep2Sleep on the navigation bar
- frandom RNG
- Sound Control by @flar2
- ZRAM using LZ4 optimized for ARM by default
- Optimized power management driver by @Yank555
- Native exFAT support without needing fuse @dorimanx)
- KCAL
- Vibration control
- uses higher power CPUs to boot (got roughly 3s faster boot time)
- Dynamic Fsync
- Gentle Fair sleepers can be toggled via sysfs and Kernel Adiutor
- Smaller tweaks
To do:
- Switch toolchain
- Remove "dirty" from the kernel name Apparently I need to push all changes to github before compiling(or recompiling the same kernel as soon as I pushed everything)
- Set the phone to accept the lower frequencies without having to set this up in Kernel adiutor
- Alter interactive governor to use full frequency range
- Add D2TS for screen and fingerprint sensor, S2W
- Wakelock reductions
- Maybe BLX, KCAL (even though I don't get the point to implement it) I was curious and did it now, looks nice
- LED and vibration control
- Switch hotplugging mechanism to Lazyplug, hotplugging is not that energy efficient anymore
See the attached picture regarding the CPU stats when using yankactive for example
Credits go to:
@Lord Boeffla @flar2 @dorimanx @Yank555
Unfortunately I didn't give proper credits on my github, I want everyone to know, that none of the features were designed and written by myself, just adapted to work on our phones!
Download here:
https://drive.google.com/drive/folders/0B0mn6OUqIDzBZG1DM1Y4dmxUV2c
Flash in TWRP, root and every other ramdisk modification will be preserved (Anykernel2 by osmosis)
Github:
https://github.com/TheSSJ/tulip_kernel
Changelog
V1.1: Initial version for public release!
V1.2: KCAL support
V1.3: Changed boot CPUs to higher power ones, added dynamic Fsync, added Quick Wakeup driver
V1.4: Gentle Fair Sleepers can be toggled now, ROW scheduler tweaked
NOTE: in case anyone is wondering why I didn't pick the DevDB projects: as our device is not activated to be used with DevDB, I went with normal threads
TheSSJ said:
V1.1: Initial version for public release!
NOTE: in case anyone is wondering why I didn't pick the DevDB projects: as our device is not activated to be used with DevDB, I went with normal threads
Click to expand...
Click to collapse
Hi! Amazing work! Thx for the job.
Can I use this kernel with AOKP? AOKP has android 7.1.2
Askael said:
Hi! Amazing work! Thx for the job.
Can I use this kernel with AOKP? AOKP has android 7.1.2
Click to expand...
Click to collapse
I wouldn't exclude this, but as I am running on stock, I can't confirm or deny...
You could make a backup of your boot and flash it and see what happens, worst thing is that you need to reboot to recovery and restore your backup
TheSSJ said:
V1.1: Initial version for public release!
NOTE: in case anyone is wondering why I didn't pick the DevDB projects: as our device is not activated to be used with DevDB, I went with normal threads
Click to expand...
Click to collapse
TheSSJ said:
I wouldn't exclude this, but as I am running on stock, I can't confirm or deny...
You could make a backup of your boot and flash it and see what happens, worst thing is that you need to reboot to recovery and restore your backup
Click to expand...
Click to collapse
Thank you for replay, what governor you use?
You will need to try and see.
It uses anykernel which is good. But aokp and lineage are on android 7.1.2 while stock is on android 7.1.1. There was at least one kernel api change that may cause problems. But I'm not sure.
I'm assuming this package has the wlan module also...?
Askael said:
Hi! Amazing work! Thx for the job.
Can I use this kernel with AOKP? AOKP has android 7.1.2
Click to expand...
Click to collapse
@ssj @tdm
Guys, try flash kernel, AOKP, don't work.
W8 kernel version from customs
tdm said:
I'm assuming this package has the wlan module also...?
Click to expand...
Click to collapse
You mean the prima wifi stuff I have seen in you github? Honestly I didn't feel the need...does it improve the wifi experience or is it just for making it compatible with LineageOS?
No, I mean the kernel module for wifi, /system/lib/modules/pronto/pronto_wlan.ko. If that doesn't match your kernel, it won't load and you won't have wifi.
Note stock has a handful of other kernel modules, but I don't think any of them are needed Most look like they are for testing.
TheSSJ said:
You mean the prima wifi stuff I have seen in you github? Honestly I didn't feel the need...does it improve the wifi experience or is it just for making it compatible with LineageOS?
Click to expand...
Click to collapse
tdm said:
No, I mean the kernel module for wifi, /system/lib/modules/pronto/pronto_wlan.ko. If that doesn't match your kernel, it won't load and you won't have wifi.
Note stock has a handful of other kernel modules, but I don't think any of them are needed Most look like they are for testing.
Click to expand...
Click to collapse
Oh, ok...pronto driver is built into the kernel though, all other modules are really for debugging and testing as far as I could gather, so they are not included (and the phone works fine)
@Askael: As for a custom kernel for Lineage/AOKP etc: as I won't have these OS's on my phone I use as my daily driver, I can of course create one, but it is always published as untested, so there is no point IMHO.
TheSSJ said:
Oh, ok...pronto driver is built into the kernel though, all other modules are really for debugging and testing as far as I could gather, so they are not included (and the phone works fine)
@Askael: As for a custom kernel for Lineage/AOKP etc: as I won't have these OS's on my phone I use as my daily driver, I can of course create one, but it is always published as untested, so there is no point IMHO.
Click to expand...
Click to collapse
But we can test this. But if you not want - don't worry! :good:
Askael said:
But we can test this. But if you not want - don't worry! :good:
Click to expand...
Click to collapse
Will think about it
Version 1.2 is out, now with KCAL screen control support!
I'm building a kernel with many of these features for the LineageOS ROM. Want me to make a thread, and then you can link it for people interested in using it in your OP? Source is here: https://github.com/djkazic/sombrax_kernel
kevincai96 said:
I'm building a kernel with many of these features for the LineageOS ROM. Want me to make a thread, and then you can link it for people interested in using it in your OP? Source is here: https://github.com/djkazic/sombrax_kernel
Click to expand...
Click to collapse
Hi,
Feel free to open a new thread it is important to push this phone amd its potential as good as possible!
Development will go on, i still have some items to implement :good:
@TheSSJ
Hi! Any news about update?
@TheSSJ
Good to see you in Axon mini from zenfone 2
Askael said:
@TheSSJ
Hi! Any news about update?
Click to expand...
Click to collapse
You mean a custom kernel for CM builds or an update for this stock kernel?
For the CM based one I didn't start, although applying the modifications I applied to my kernel should be working
Druboo666 said:
@TheSSJ
Good to see you in Axon mini from zenfone 2
Click to expand...
Click to collapse
I was spotted It's a great phone, let's get the most out of it
TheSSJ said:
You mean a custom kernel for CM builds or an update for this stock kernel?
For the CM based one I didn't start, although applying the modifications I applied to my kernel should be working
I was spotted It's a great phone, let's get the most out of it
Click to expand...
Click to collapse
For this stok kernel
I was spotted It's a great phone, let's get the most out of it
Click to expand...
Click to collapse
i am using Axon 7 and yeah its a great phone i must miss you in axon 7
Updated version uploaded and available on G-Drive, boot time increased by 3s (you take what you can get )
/EDIT: Next version out, small enhancements and adding the possibility to enable/disable gentle fair sleepers
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now probably voided.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is this:
After tired of looking for stable no nonsense kernel for MIUI and couldn't fine one, I've decided to compile one myself. This is just a kernel I flipped from readily publicly available source, nothing special here. It should boot with any MIUI Nougat roms.
Click to expand...
Click to collapse
Difference with stock MIUI kernel
Compiled using OmniRom's kernel source as base so contains all its features, fixs and patches.
Compiled using UberTC 4.9.4 for stability.
Compiled using correct optimisation flags for our MSM8953 cpu.
Patched with EAS scheduler from OnePlus3 LineageOS-based kernel with EAS
Updated Ondemand cpu governor from franciscofranco's kernel for OnePlus3, finetuned it abit and made it as default booting cpu governor.
Default to Noop disk i/o scheduler on boot.
Default to Westwood tcp congestion control on boot.
Disabled/made as built-in some modules.
Disabled some stuff like zram, cleancache, zcache.
Added support for exfat fs via exfat-nofuse.
Enabled ntfs fs support.
Init.d startup script support with correct permissions applied on every boot.
Probably some other things I forgot to list here...
Click to expand...
Click to collapse
Changelog:
r1 - First public release.
Click to expand...
Click to collapse
Download:
FROM HERE
Click to expand...
Click to collapse
Installation notes:
Need unlocked bootloader, so unlock your bootloader if you haven't yet.
Need to be on any custom recovery so flash one if you haven't yet.
Need to be on any MIUI Nougat rom.
If you have any custom kernel other than this kernel already installed, please flash or restore your MIUI rom stock kernel because this kernel would need to use the stock unmodified ramdisk and custom kernel might already modify it.
Backup, backup and backup!
Download the zip, put into either internal phone storage or sdcard, flash away.
If you want to go back to your previous kernel, just dirty flash your rom or restore boot and system from backup.
Click to expand...
Click to collapse
Thanks to:
God, for everything.
Linus Torvalds, for the Linux kernel.
Google, for Android.
Xiaomi, for kernel source.
Xda forum, learnt alot from here.
Uber team, for the toolchain.
khan_frd2002, for the OmniRom kernel source.
EAS-Project on Github for the EAS patches.
franciscofranco, for the Ondemand cpu governor source.
osm0sis, for AnyKernel2 kernel installation template.
Probably some others I forgot to list here...
Click to expand...
Click to collapse
XDA:DevDB Information
FLIP kernel, Kernel for the Xiaomi Redmi Note 4
Contributors
coldplug
Source Code: https://github.com/thecoldplug/android_kernel_xiaomi_msm8953
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r1
Stable Release Date: 2018-01-11
Created 2018-01-11
Last Updated 2018-01-11
Wow. EAS working well ?
Kevin Saiza said:
Wow. EAS working well ?
Click to expand...
Click to collapse
Partially. Cpu governors meant to work with eas like sched and schedutil doesn't work well with 625 because it was meant to work with dual cluster a72+a53 like 820 etc, while 625 only have a single cluster of a53, plus theres no proper powertable. Sched and schedutil just froze at lowest available freq because it can't choose proper powertable, making phone lags. I've disable both and made ondemand as default governor.
I se the OP off this thread speaking about voltage values, is this what o are referring as power table?
https://forum.xda-developers.com/redmi-note-4/how-to/tweak-interactive-governor-tunables-t3608118
zecabra said:
I se the OP off this thread speaking about voltage values, is this what o are referring as power table?
https://forum.xda-developers.com/redmi-note-4/how-to/tweak-interactive-governor-tunables-t3608118
Click to expand...
Click to collapse
Similar. All cpu already got predefined voltage table in the kernel source for the usual hmp scheduler, usually modified for oc/uv. Eas need its own, new voltage table specifically written for it, for every specific cpu too.
tks for the nice kernel, I only have one request if possible, I'm more a guy of battery saving because i spent long times with no access to recharge the phone, its the implementation of alucard
add please function: fix ttl.
this is very important for Russia, Ukraine, Belarus ... and others.
this is necessary to bypass the blocking of cellular operators.
this is in the same kernel as: [KERNEL][MIDO] Stormguard 01/01/18, [KERNEL][MIDO][VOLTE++] Chewy kernel r8.1 [22/12].
Please
zecabra said:
tks for the nice kernel, I only have one request if possible, I'm more a guy of battery saving because i spent long times with no access to recharge the phone, its the implementation of alucard
Click to expand...
Click to collapse
If you mean alucard cpu governor, then I've already tried to add it lol. Doesn't work, endless reboot. In fact all interactive based cpu gov like impulse, alucard, blu_actice, zzmoove won't work here. Hence why I've disabled even the interactive cpu gov.
DEMIGOD124 said:
add please function: fix ttl.
this is very important for Russia, Ukraine, Belarus ... and others.
this is necessary to bypass the blocking of cellular operators.
this is in the same kernel as: [KERNEL][MIDO] Stormguard 01/01/18, [KERNEL][MIDO][VOLTE++] Chewy kernel r8.1 [22/12].
Please
Click to expand...
Click to collapse
Doesn't need to add or anything, its already in the kernel and enabled, i think...
I don't have any idea how it work or if it even work though, so do try and let me know how it goes.
FLIP-r1-MIUI-mido.zip Failed - Virus detected What???
pikachukaki said:
FLIP-r1-MIUI-mido.zip Failed - Virus detected What???
Click to expand...
Click to collapse
Lol your virus scanner might have detected the zip itself or the script within as a virus, its not. Gdrive where I've uploaded it should already scanned it before you even download.
Don't use that pos virus scanner, change to other virus scanner or better yet, use linux ?
So witch one is better for miui and why ?
kcal bugg still there?
kemo12533 said:
So witch one is better for miui and why ?
Click to expand...
Click to collapse
Theres only one...
aman1241 said:
kcal bugg still there?
Click to expand...
Click to collapse
Haven't add kcal.
coldplug said:
Theres only one...
Haven't add kcal.
Click to expand...
Click to collapse
I mean this one Vs stock
I am not really into the kernel thing and wanna know what will I get from this one VS the stock in a sample do novas like me will get what all this futures for ?
kemo12533 said:
I mean this one Vs stock
I am not really into the kernel thing and wanna know what will I get from this one VS the stock in a sample do novas like me will get what all this futures for ?
Click to expand...
Click to collapse
Already wrote all the differences on the first post. Can't really say whats good amd whats not due difference usage and needs, but do try and see for yourself. Backup before install, restore if you're not happy ?
coldplug said:
Already wrote all the differences on the first post. Can't really say whats good amd whats not due difference usage and needs, but do try and see for yourself. Backup before install, restore if you're not happy ?
Click to expand...
Click to collapse
i am on pixel experience right now so i cant atm but i will soon
Hi
Where is the link?
Overclock
Can I overclock my cpu and gpu on this kernel ??
I feel stock is better
I feel as so cause after switching to this kernel my phone is a bit more Laggy so I switched back to stock