Hey everyone, today I tried to revert to my original stock rogers firmware via the clockwork recovery backup I made. After booting, it gets passed the i896 page and continues until it says ANDROID in a graphic image. This flashes every once in awhile. But after an hour of just leaving it, it's still in the same cycle. I can boot into recovery but when I try to install a new rom it says:
"E: Can't mount /dev/block/st19
(No such file or directory)
E: Can't mount SYSTEM:
E: Failure at line 2:
copy_dir PACKAGE:system SYSTEM:
Installation aborted"
If I go into the Mounts and Storage Menu it shows that /system isn't mounted and the same error occurs if I try to mount it. If I try to do a restore from either of my clockwork backups it says the MD5 sums don't match.
As I'm fairly knew to android I'm apprehensive to go any further because I think I'll probably make it worse. I'm thinking I'll use Odin, if there aren't any other suggestions, I've just never used it before and don't have windows installed at the moment.
What do you guys think is the best course of action?
Thanks for your help.
Get yourself into download mode and flash to stock using Odin. Then root and install the rom of your choosing (I recomend Assonance)
Hi all,
Would appreciate any assistance with this as I'm going back and forth on this topic on the net and hitting dead ends at every turn.
Firstly, I have a Samsung Galaxy S2. It is ROOTED (using S2root). I have installed ROM Manager and Clockworkmod. 4.0.0.15.
I was using these instructions
*URL prevented by forum* but it was on androidpolice.com website -- to get to be able to do a full NAND backup before I screw about with anything. However, I cannot. Whenever I choose to do a full backup from rom manager my phone restarts and I get
Android System Recovery (3e)
4 options not including backup or restore (i.e. reboot, install update from sd,wipe data/factory reset, wipe cache partition )
and at the bottom of the screen
E: Failed to verify whole-file signature
E: signature verification failed
Installation aborted
and won't go any further
I've read forum posts elsewhere on 'toggling verification on/off' but there is no option to do this in any menu, including ROM Manager's even under Advanced. I've seen other posts that show a toggle in the Clockworkmod menu but I never get there - it only restarts in Android System Recovery not Clockworkmod recovery menu.
Does anyone have any sensible suggestions that would help please?
thanks
Mark
Hey there,
My brother was trying to install a custom ROM on his phone but it was having issues so he went to restore a TWRP backup of an AOSP ROM he had before. Unfortunately, it was a backup of every partition, including the Firmware partition. When it got to restoring Firmware, it formatted the existing firmware partition, but then immediately failed at restoring the old Firmware partition backup with the following showing in the recovery.log:
Code:
I:Extracting uncompressed tar
==> extracting: /firmware//image/ (mode 40550, directory)
tar_extract_file(): failed to set permissions on /firmware//image/ !!!
I:Unable to extract tar archive '/data/media/0/TWRP/BACKUPS/QV7013TG03/Firm/firmware.vfat.win'
Error during restore process.
extractTarFork() process ended with ERROR: 255
After this, any attempts to start the phone result in a bootloop. We can still get into recovery but every time we try to restore the TWRP backup it fails at firmware again. Any ideas on how to get the phone working?
EDIT: Fixed!
I fixed this a while ago but if I recall correctly, we ended up flashing the stock firmware files with Flashtool. Basically go to this thread follow the steps under Part 2 and Part 2.5, then once you've created the firmware, flash it using Flashtool --> Lightning Button --> Flashmode --> Choose the firmware you made --> Wipe Userdata (not sure if we did this or not, try without it, if it doesn't work then wipe userdata) -->Flash. That should fix it.
I have never managed to restore backup on this stupid phone. Always errors with making backup or restoring backup or not detecting storage or some other crap. Sick of it
Hello guys,
Today I wanted to update my Honor 8 (FDR-L09) because it was showing me, that there is a new update ready to install (FRD-L09C432B405) and I was on a very old firmware (something from mid 2017). So it was time for me to update.
I downloaded the latest update (FRD-L09C432B405) and tried to wipe the cache, dalvik, and Data, but for some reason it "couldn't mount /data" and the wipe failed.
After an advanced wipe it worked and I tried to flash the stock image (the update which was shown to me (FRD-L09C432B405) with TWRP (3.1.1.1.)).
Now my hassle starts:
1. The Rom couldn't get flashed because of "Error: 7" --> I fixed it with the common "Error 7 fix --> editing the update-script and removing the assert line. (And yes, I'm 100% sure that it was the right ROM.
2. Now TWRP seemingly starts to flash the rom but inbetween the lines there is "mountencrypt: failed to mount /data: no such file or directory and it ends with "unknown command [[]" and it takes just two seconds, so the flash obviously isn't succsessfull.
I tried the "failed to mount /data" fix, where I change the data system to ext3 and then back to f2fs and change it back, but it won't work.
In my frustration I did another pretty bad thing and made another advanced wipe and wiped the system too, so now I don't have an OS on my system.
Maybe it's also important to note that there was a window showing up for a very short amount of time, with something like "encryption/encrypted" showed up.
What should I do now? Is there a way to fix the "/data couldn't be mounted" problem? Or am I missing a vital step in flashing the stock rom?
Thanks for your kind help!
You can not flash an update with twrp unless you use hurupdater. You essentially bricked your phone. Look for hurupdater here on xda and follow the instructions and you'll be fine
Need custom recovery for Mobiistar C1 shine 4g mt 6739 device as m stuck need it urgently and want install android 10 gsi image my device has arm32 a only architecture some suggest me some good and lite gsi images please firstly I need custom recovery twrp please someone help.
It would be hard to support a 2018 device I guess.
[CLOSED] I Will build TWRP for your device!
I wanna build twrp for your device! Pls give info about your device! if possible give stock firmware!
forum.xda-developers.com
i can upload recovery.img file for if you want
its Mobiistar C1 shine (MT6739) arm 32bit a only supported device running on 8.1 i was some how able to root it but unable to install custom recovery if u can please build one for this device i will upload stock recovery.img in few minutes presently its bricked but i will recovery it because i have stock firmware and flashing tool of it....so dont worry just please build a custom recovery like twrp for this device asap if possible
Again: You request a TWRP build for your device going to this thread
[CLOSED] I Will build TWRP for your device!
I wanna build twrp for your device! Pls give info about your device! if possible give stock firmware!
forum.xda-developers.com
any custom recovery bro sorry for that (twrp)
my phone back running again i have flashed it with stock firmware recovery images i have attached earlier and so does phone details screenshot now present situation is 8.1 not rooted stock recovery and firmware so i hope if anyone can help i will be glad
installed latest magisk apk and .zip also by patching boot.img file and flashing that with sp tool to install magisk and got root privilege's
all now i want is proper running and fully functional custom recovery to install custom roms and mods
copvaibhav said:
its Mobiistar C1 shine (MT6739) arm 32bit a only supported device running on 8.1 i was some how able to root it but unable to install custom recovery if u can please build one for this device i will upload stock recovery.img in few minutes presently its bricked but i will recovery it because i have stock firmware and flashing tool of it....so dont worry just please build a custom recovery like twrp for this device asap if possible
Click to expand...
Click to collapse
I am not responsible for any wrongdoing by you. Always have ROM stock files. Any error, install stock recovery again.
First you need to unlock the bootloader if necessary! Unzip file attached and look 2 files.
Then, the installation plan:
0) Flash the TWRP with SPFT or fastboot;
1) Enter TWRP IMMEDIATELY without starting in the system, otherwise TWRP can revert to the stock;
2) When asked to enter the password, select Cancel;
3) Load the file with Magisk (look for any magisk19.zip for TWRP and the decryption file for EXTERNAL memory;
4) Flash Magisk immediately and then install the file data_decrypt_Mobiistar_C1_Shine.zip immediately;
5) Make FORMAT DATA - bottom left button - Type: YES. Go back to the TWRP menu;
6) Make Wipe: data, cache, dalvik (reset to factory settings! Save your data!);
7) Reboot to TWRP (password must not ask);
8) Restart on the system, root is received.
thanks bro for making recovery.img when installing magisk 19.zip its giving error on last step failed to mount /vendor/persist (invalid argument). done
after that i tried to install your data decrypt .zip after one reboot to recovery because i have tried before without reboot recovery once so this time rebooted and installed your data.zip file and again on the last step same error as magisk failed to mount /vendor/persist (invalid argument). done
after that i tried to format by typing yes but again same error failed to mount /vendor/persist (invalid argument).done
just to inform you i have formatted phone from inside by turning it on factory reset but nothing happened....and internal space is not mounting i some how managed to install these things via OTG USB but same error again and again. i am attaching screenshot also which i captured from other phone of mine.
kindly help asap
copvaibhav said:
thanks bro for making recovery.img when installing magisk 19.zip its giving error on last step failed to mount /vendor/persist (invalid argument). done
after that i tried to install your data decrypt .zip after one reboot to recovery because i have tried before without reboot recovery once so this time rebooted and installed your data.zip file and again on the last step same error as magisk failed to mount /vendor/persist (invalid argument). done
after that i tried to format by typing yes but again same error failed to mount /vendor/persist (invalid argument).done
just to inform you i have formatted phone from inside by turning it on factory reset but nothing happened....and internal space is not mounting i some how managed to install these things via OTG USB but same error again and again. i am attaching screenshot also which i captured from other phone of mine.
kindly help asap
Click to expand...
Click to collapse
This is Ok. I made TWRP fast and not remember if the stock partitions has \vendor\persist. So if has that's message is normal. Therefore messages about \vendor\nvdata;nvram;nvcfg is normal too. Very pacth zip files can delete that and the device cannot have IMEI.
First: Is good know the file TWRP worked;
- - You can't install any zip without FORMAT DATA first because FORMAT DATA process can view internal storage. If you don't FORMAT DATA maybe the zip file going wrong with MicroSD & OTG.
In this moment you understand: not use external storage! Put zip in the internal storage an try again.
About MTP: Has anything wrong wiht A8.1 & TWRP. Most devices with A8.1 and TWRP do not have access to MTP. I don't know what happens because I don't know why TeamWin was unable to resolve this.
Now you need put zip with adb command (search how to do) or use sileload on the TWRP.
PS: the picture attached by you show about decrypt. In the first moment you need acept modifications and password you press CANCEL.
lopestom said:
This is Ok. I made TWRP fast and not remember if the stock partitions has \vendor\persist. So if has that's message is normal. Therefore messages about \vendor\nvdata;nvram;nvcfg is normal too. Very pacth zip files can delete that and the device cannot have IMEI.
First: Is good know the file TWRP worked;
- - You can't install any zip without FORMAT DATA first because FORMAT DATA process can view internal storage. If you don't FORMAT DATA maybe the zip file going wrong with MicroSD & OTG.
In this moment you understand: not use external storage! Put zip in the internal storage an try again.
About MTP: Has anything wrong wiht A8.1 & TWRP. Most devices with A8.1 and TWRP do not have access to MTP. I don't know what happens because I don't know why TeamWin was unable to resolve this.
Now you need put zip with adb command (search how to do) or use sileload on the TWRP.
PS: the picture attached by you show about decrypt. In the first moment you need acept modifications and password you press CANCEL.
Click to expand...
Click to collapse
sideload is not starting forgot to mention it i have tried that also booted phone normal put the file in internal but in recovery cant have access to internal storage and yes i have press cancel first and that accepted modification but nothing happened no internal storage access only some how otg thats it i dont know what to do
copvaibhav said:
sideload is not starting forgot to mention it i have tried that also booted phone normal put the file in internal but in recovery cant have access to internal storage and yes i have press cancel first and that accepted modification but nothing happened no internal storage access only some how otg thats it i dont know what to do
Click to expand...
Click to collapse
Okay. Wait my free time and I'll create other TWRP for your device.
Reflash stock recovery if you want & test other file soon.
Update
\|/ Lucky file attached today. So install and test. You can install zip that I put before or Donwload acoording your device cpu has. Read instructions about that again.
Reference Download: https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/
thanks bro i dont know how it worked but it worked again i have to use otg but this time it worked by downloading different force disabler.zip after that i have formatted the data by typing yes it worked then again i flashed your disabler and new recovery image and phone booted magisk installed phone rooted.....thanks a ton i dont know how to say thanks you but thank you all .
can please suggest me as my mt 6739 is 32arm a only device some light gsi for my device actually i want custom mods in gsi so if u can suggest me which also supports my device i will be very thankful
copvaibhav said:
thanks bro i dont know how it worked but it worked again i have to use otg but this time it worked by downloading different force disabler.zip after that i have formatted the data by typing yes it worked then again i flashed your disabler and new recovery image and phone booted magisk installed phone rooted.....thanks a ton i dont know how to say thanks you but thank you all .
can please suggest me as my mt 6739 is 32arm a only device some light gsi for my device actually i want custom mods in gsi so if u can suggest me which also supports my device i will be very thankful
Click to expand...
Click to collapse
Look correct app to know about your device: Treble Info
You need try install AOSP 8 & 9: https://github.com/phhusson/treble_experimentations/releases
Look "bugs"; try solving; keep your time with experiments.....
After you can try LOS, RRMix, Havoc, etc.....
About this thread/ask help about Custom Recovery so Solved. @jerryhou85
Good Lucky!
system-arm-aonly-vanilla-nosu.img.xz
system-arm32_binder64-aonly-vanilla-nosu.img.xz
bro which file shpuld i download as i told you mine is 32bit arm a only (what is arm first link and arm32binder64 aonly difference) kindly tell.
just to clarify i have download both removed.xy from ext. and flashed from recovery system image but phone goes into fastboot after reboot and when rebooting in recovery at the top it shows no os installed.
lopestom said:
Okay. Wait my free time and I'll create other TWRP for your device.
Reflash stock recovery if you want & test other file soon.
Update
\|/ Lucky file attached today. So install and test. You can install zip that I put before or Donwload acoording your device cpu has. Read instructions about that again.
Reference Download: https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/
Click to expand...
Click to collapse
Sir it's stuck on password screen touch not working please fix it, I will always be grateful to you.
Honey2012 said:
Sir it's stuck on password screen
Click to expand...
Click to collapse
The first start need choose the CANCEL. I think you not know about TWRP (unofficial) and the process with device/TWRP without encryption/decryption process.
If you want that so send me some device to develop/have the possibility of getting that option.
Honey2012 said:
touch not working please fix it, I will always be grateful to you.
Click to expand...
Click to collapse
As you read, I not have your device in my hands!
Many 32bits and few 64bits devices have problem with touch screen from kernel. That's not my error! It's from device company.
I not know about touch screen work or not since copvaibhav not write about. But I won't fix this. There is also the possibility to use OTG and plug in a USB Mouse to use in TWRP.
There are solutions to fix the touch screen but I don't have the device and I don't have time to do it. Search and you will know. So solve it yourself and thank your self for it.
Ask copvaibhav for more process and using TWRP.