Hello guys, so here's my problem :
Today i wanted to root my samsung galaxy s6 (H3G United Kingdom Version) SM G920F and i did by using a CFW method
it all went fine until i decided to instal xposed framework and i did but when i flashed it via TWRP i rebooted my phone and the led notification is now blue and it's always ON , i have decided then to search for my stock rom and i found two that i have downloaded but unfortunately whenever i want to flash it via odin i have a problem : it says that it failed now i want to know if there's hope for me to fix my phone or it's gone ? because i tried almost every stock rom available for my phone but odin always shows me that error message at the early begining of the flash !
Thanks for your answers in advance guys ! :good::good:
Update : i downloaded the latest firmware from sammobile the 6.0.1 and flashed it with odin ! And this time it worked :laugh:
Underworld King said:
Update : i downloaded the latest firmware from sammobile the 6.0.1 and flashed it with odin ! And this time it worked :laugh:
Click to expand...
Click to collapse
Glad you got it working.
Thread closed
Related
Hi All,
Hoping for some advice
Ages ago I installed some custom roms on my UK N8010 - I now want to pass the tablet onto a non technical family member and want OTA updates to work
I did a restore before and in download mode it showed Binary as official and system status as official but OTA was not working
I've used Odin to flash the BTU N8010XXUCMG1 stock rom on there from samsung-updates.com
All seemed fine, though now there is no OTA update to test.. when I hold Power+Volume to get into download mode it is still showing "Odin Mode" at the top
Can anyone advise how I can be sure that OTA will work?
Thanks in advance!!
connect the note to Kies on pc , and check on Kies for updates, if it says u r modified then OTA will not work, if it says u r on latest firmware , then u r good (I think )
Thanks - It did that before but still failed when upgrading on the device itself
I did some more digging and managed to find an older firmware on sammobile.com, flashed that and it's updating ok it seems
Hi All,
Have s6 SM-G920F international model. now my brother accidentally try wrong attempts in pin to unlock the phone. so phone got locked. and i give to guy who unlock the phone and after that i am not able to get official update . so have decided to install official stock firmware. details are below. when phone is return back to me have below version.
Old firmware :-
G920FXXU1AOCY 5.0.2 Lollipop, Initial release on 3/29/2015 for EE only.
New firmware which i try using ODIN :-
G920FXXU3QOJF Galaxy S6 SM-G920F 5.1.1 Stock Firmware -- This firmware is officially released on November 2015 for EE UK Galaxy S6 alone.Build date: October 12, 2015.
Got success in above firmware , PASS is result in ODIN.
But when phone reboot after this ,after erasing screen appear then it hang on logo screen. have waited around 20 mins but nothing happen. Have tried recovery mode also via wipe cache / factory reset , no change in result.
Have again try to install G920FXXU1AOCY but got sof rev fail in ODIN .
Have tried samsung switch for software update it's successful but when phone reboot it again stop there at logo screen.
In recovery mode -- G920FXXU3QOJF this show on top.
I don't whether phone was root or not as guy says he just unlock the phone. got this from UK .
Can anyone please help which firmware will now work on this case ? how to solve this issue.
Please help me as i mess up with my phone which work great before .
Tons of thanks to all.
Is there any firmware which work on all unlock or root phone for this model ? the above step from 5.0.2 have installed 5.1 is correct step ? i am working this phone from india,before doing this firmware update my sim card work properly. as phone was already unlock or rooted (not sure here whether it's rooted or not but sure as it's unlocked phone) as i can see EE apps in phone. please help me . it's hurt me on my decision to do this upgrade and create mess. :crying:
Can anyone pls help.. Thanks
dbarot87 said:
Can anyone pls help.. Thanks
Click to expand...
Click to collapse
have you solved this yet?
this helped me:
http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Hey XDA Forum,
I've got a big problem with my Samsung Galaxy Note EDGE (915FY) running on 5.0.1. I can't update to a newer version.
I tried it via the system updates but it failed, it recomendet to use Kies so i did that but it also failed and rebooted into 5.0.1 again.
I also tried updating the firmware via Odin but guess what it failed, I got somekind of file size error.
Is there anyone out there who can help me ?
If you need more information about that just let me know !
Thank you so much !
Hello guys I need some help I have looked all over and don't know what else to do.
For me the problem started when I tried to install a new custom rom, I was running lollipop and went for the marshmallow version of the rom. As the developer indicated I updated the bootloader / Modem to 6.0.1 and TWRP to the latest version. The install went perfect except that when I finished installing my screen was inverted over the X axis. ( I think I installed the edge version on my flat SM-G920I phone) By the way for some reason my phone was showing model number SM-G925F from the time I rooted it a while ago. That is what threw me off.
Any ways I have tried *#2663# with no luck and also Samsung Info app to use the secret codes and the *#2663# is no there so that doesn't work I think that code doesn't work on 6.0.1 , My next option was to downgrade to 5.1.1 and I get SW REV check fail.
So I need some help to either get my screen back to normal on 6.0.1 or to downgrade to 5.1.1
THanks for the help!
Delete - must read first
gmata007 said:
Hello guys I need some help I have looked all over and don't know what else to do.
For me the problem started when I tried to install a new custom rom, I was running lollipop and went for the marshmallow version of the rom. As the developer indicated I updated the bootloader / Modem to 6.0.1 and TWRP to the latest version. The install went perfect except that when I finished installing my screen was inverted over the X axis. ( I think I installed the edge version on my flat SM-G920I phone) By the way for some reason my phone was showing model number SM-G925F from the time I rooted it a while ago. That is what threw me off.
Any ways I have tried *#2663# with no luck and also Samsung Info app to use the secret codes and the *#2663# is no there so that doesn't work I think that code doesn't work on 6.0.1 , My next option was to downgrade to 5.1.1 and I get SW REV check fail.
So I need some help to either get my screen back to normal on 6.0.1 or to downgrade to 5.1.1
THanks for the help!
Click to expand...
Click to collapse
Download a firmware and flash it with odin
Try downloading Shortcut Master (lite) from the play store. It may give you access to the 2663 code. Otherwise, as above.
Soufiansky said:
Download a firmware and flash it with odin
Click to expand...
Click to collapse
What firmware? I have tried it with 4 different firmwares and no luck
The problem is that I cannot downgrade to 5.1.1 even with the original software
Ripshod said:
Try downloading Shortcut Master (lite) from the play store. It may give you access to the 2663 code. Otherwise, as above.
Click to expand...
Click to collapse
Shortcut Master did not work either, 2663 is not displaying
gmata007 said:
What firmware? I have tried it with 4 different firmwares and no luck
The problem is that I cannot downgrade to 5.1.1 even with the original software
Click to expand...
Click to collapse
No download a MM firmware, i suppose you flashed a 4XX bootloader,if so then u cant downgrade anymore...
Soufiansky said:
No download a MM firmware, i suppose you flashed a 4XX bootloader,if so then u cant downgrade anymore...
Click to expand...
Click to collapse
Ok ill try that Downloading 6.0.1 stock from Samfirm right now
gmata007 said:
Ok ill try that Downloading 6.0.1 stock from Samfirm right now
Click to expand...
Click to collapse
Let me know if it worked ?
Soufiansky said:
Let me know if it worked
Click to expand...
Click to collapse
It worked!
Thanks so much!
gmata007 said:
It worked!
Thanks so much!
Click to expand...
Click to collapse
Happy to hear that :victory:
Several months ago I've rooted my Samsung Galaxy S7, but was not satisfied and tried to unroot the phone. But it became a drama.
My phone doesn't start up anymore.
I tried to load the original firmware with Odin, but every attempt failed, showing the error message:
Check fail(bootloader) device: 8, binary: 7
I understood that the firmware I was trying to load, was not the most recent firmware.
But I cannot find newer firmware for my model: SM-G930F - The Netherlands
I've downloaded the most recent firmware from Samdb.org and I've downloaded the most recent firmware with the Frija tool.
Also I've tried the Fixppo software from iMyFone, but without success.
From Sammobile unfortunately I cannot download files, so I could not try this way.
Could anyone give me the golden tip?
sellh1 said:
Several months ago I've rooted my Samsung Galaxy S7, but was not satisfied and tried to unroot the phone. But it became a drama.
My phone doesn't start up anymore.
I tried to load the original firmware with Odin, but every attempt failed, showing the error message:
Check fail(bootloader) device: 8, binary: 7
I understood that the firmware I was trying to load, was not the most recent firmware.
But I cannot find newer firmware for my model: SM-G930F - The Netherlands
I've downloaded the most recent firmware from Samdb.org and I've downloaded the most recent firmware with the Frija tool.
Also I've tried the Fixppo software from iMyFone, but without success.
From Sammobile unfortunately I cannot download files, so I could not try this way.
Could anyone give me the golden tip?
Click to expand...
Click to collapse
Use Sam Firm tool, to downlaod Netherlands (MMO) then flash with Odin. MMO is currently boot loader 8 which you need.
cooltt said:
Use Sam Firm tool, to downlaod Netherlands (MMO) then flash with Odin. MMO is currently boot loader 8 which you need.
Click to expand...
Click to collapse
Thank you very much. This worked for me. The telephone is working again.
sellh1 said:
Thank you very much. This worked for me. The telephone is working again.
Click to expand...
Click to collapse
Your welcome