Related
hi guys, this problem was solved, unexpectedly.
after read guhl99's post in Thread: PSA: Rooting methods and recently discovered dangersthread,
i finally confirm that my htc DS was bricked by an accidentally freeze and the immediately battery pulled-out-&-pushed-in unstably.
the eMMC-chip(marked as SAMSUNG104, KLM4G2DEJE A001, FDAE15PC) was completely dead,
i made a replacement with a new one(made by Sandisk serial:SEM04G), and then everything goes on good.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"Thanks to" the design of the battery compartment door, the battery pullout-pushin becomes running-risks.
Make sure there's NOT any tiny battery move when you flipping the compartment door from the side.
Make sure disconnect the battery and DS itself quickly & stably as soon as you could.
Make sure there's at least 10 seconds between battery pullout and pushin.
"How can I be sure if it's a hw problem? I mean, it looks like one, but I would like to be sure..."
please check #27 http://forum.xda-developers.com/showpost.php?p=16135893&postcount=27
A eMMC design flaw, Confirming info from htc-offical (thanks apairofscissors)
http://forum.xda-developers.com/showpost.php?p=20163494&postcount=23
=============Debug Procedure=============
Here are 3 parts in this post.
Actually, it's not that long,
and the most important info is in 8. [ adb shell ]
================Background================
SAGA PVT SHIP S-OFF RL
HBOOT-0.98.00RADIO-38.03.02.15_M
eMMC-boot
Mar 10 2001,14:58:38
ClockworkMod Recovery 3.2.0.0
a busybox within
================what happend================
while installing some apps from the market, DS was stuck at a app called "push ups".
i pulled out battery and reboot, and there came loopboot.
got in Recovery, it promts
Code:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
================things i did================
1. [ wipe data/factory reset]
Code:
Formating /data...
black splash screen, and then
E:Can't open /cache/recovery/command
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
[ wipe cache ]
Code:
Formating /cache...
Cache wipe complete.
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
2. [ install zip from sdcard ]
Code:
-Checking Model ID
-success!
-Model ID - HTC sage
Now flashing
E:Error in /sdcard/*******.zip
(Status 1)
Installation aborted.
3. [ backup and restore ]
Code:
Checking MD5 sums...
Erasing boot before restore...
Restoring boot image...
Restoreing system....
Error while formatting /system!
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
4. [ RUU+Goldencard ]
Goldencard is good, in FASTBOOT USB mod,
passed the (version) checking, updating 1.28.401.1 to 1.47.950.3, but stuck at
Code:
rebooting bootloader ......
upgrading ROM image in your Android Phone...
Please do NOT disconnect USB cable nor run any program.
5. [ ROM.zip->PG88IMG.zip ]
ROM.zip was picked-up from RUU, renamed to PG88IMG.zip, copied to sdcard,
reboot to HBOOT, and it unzip the pack normally, then stuck at updating screen, more than 1 hour.
Code:
HBOOT
[INDENT]Parsing...[SD ZIP]
[1] BOOTLOADER -updating
[2] BOOT
[3] RECOVERY
[4] SYSTEM
[5] SLPASH1
[6] USERDATA
[7] TP
[8] DADIO_V2
[9] RADIO_CUST
Do you want to start update?
[/INDENT]
6. [ PG88IMG.zip for Recovery/Radio ]
HBOOT asks do you wanna upgrade, click VOL-up, then stuck at updating screen
Code:
HBOOT
[INDENT]Parsing...[SD ZIP]
[1] RECOVERY -updating
*********
Updating is in progress...
Do not power off the device!
[/INDENT]
7. [ fastboot ]
Code:
SH********8 Connected.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
Radio version: 38.03.02.15_m.
SPL/hboot version: 0.98.0000.
product: saga.
mid: pg88*****.
security: off.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
[B]fastboot erase cache[/B]
erasing 'cache'...
[COLOR=red]erasing 'cache'... FAILED (command write failed (Unknown error))[/COLOR]
8. [ adb shell ]
DS has 2 storages:
eMMC-chip inside, /system /data /cache are mounted to mmcblk0p25, mmcblk0p26, mmcblk0p27;
SDCard removable /sdcard is mounted to mmcblk1p1.
i connect the my phone(DS-brick) through adb-shell, and compared with my friend's (DS-good), here are the prompts:
DS-good shows
Code:
mount
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/[COLOR=blue]mmcblk0p25 on /system type ext3 [/COLOR](rw,relatime,errors=continue,barrier=0,data=writeback)
/dev/block/[COLOR=blue]mmcblk0p26 on /data type ext3[/COLOR] (rw,relatime,errors=continue,barrier=0,
data=writeback)
/dev/block/[COLOR=blue]mmcblk0p27 on /cache type ext3 [/COLOR](rw,nodev,noatime,nodiratime,errors=co
ntinue,barrier=0,data=writeback)
/dev/block/[COLOR=blue]mmcblk1p1 on /sdcard type vfat[/COLOR] (rw,relatime,fmask=0000,dmask=0000,all
ow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-
ro)
DS-brick shows
Code:
/dev/block/[COLOR=blue][COLOR=red][B]mmcblk0p27 on /cache type ext4[/B][/COLOR] [/COLOR](ro,nodev,noatime,nodiratime,barrier=1
,data=ordered)
~ # mount system
mount: mounting /dev/block/mmcblk0p25 on /system [COLOR=red][B]failed: Invalid argument[/B][/COLOR]
~ # mount data
mount: mounting /dev/block/mmcblk0p26 on /data [COLOR=red][B]failed: Invalid argument[/B][/COLOR]
it means the filesystem on eMMC was accidentally broke down. so, im trying to restore the filesystem, and get these:
list the eMMC-chip partition info
Code:
~ # fdisk -l /dev/block/[B]mmcblk0[/B]
fdisk -l /dev/block/mmcblk0
[B][COLOR=red]fdisk: can't open '/dev/block/mmcblk0': I/O error[/COLOR][/B]
format /cache with type ext3
Code:
~ # mke2fs -j /dev/block/[COLOR=blue]mmcblk0p27[/COLOR]
mke2fs 1.40.8 (13-Mar-2008)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
76912 inodes, 307196 blocks
15359 blocks (5.00%) reserved for the super user
[B]First data block=1[/B]
Maximum filesystem blocks=67633152
38 block groups
8192 blocks per group, 8192 fragments per group
2024 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185
[COLOR=blue]Warning: could not read block 0: [/COLOR]
[COLOR=blue]Attempt to read block from filesystem resulted in short read[/COLOR]
[COLOR=blue]Writing inode tables: done[/COLOR]
[COLOR=red][B]ext2fs_mkdir: Attempt to read block from filesystem [/B][/COLOR]
[COLOR=red][B]resulted in short read while creating root dir[/B][/COLOR]
format /system with type ext3
Code:
~ # mke2fs -j /dev/block/[COLOR=blue]mmcblk0p25[/COLOR]
mke2fs -j /dev/block/mmcblk0p25
mke2fs 1.40.8 (13-Mar-2008)
Warning: 256-byte inodes not usable on older systems
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
35760 inodes, 142847 blocks
7142 blocks (5.00%) reserved for the super user
[B]First data block=0[/B]
Maximum filesystem blocks=146800640
5 block groups
32768 blocks per group, 32768 fragments per group
7152 inodes per group
Superblock backups stored on blocks:
32768, 98304
[COLOR=blue]Warning: could not read block 0: [/COLOR]
[COLOR=blue]Attempt to read block from filesystem resulted [/COLOR][COLOR=blue]in short read[/COLOR]
[COLOR=blue]Writing inode tables: done[/COLOR]
[COLOR=blue][B]Creating journal (4096 blocks): done[/B][/COLOR]
[COLOR=blue][B]Writing superblocks and filesystem accounting information: done[/B][/COLOR]
[COLOR=blue][B]This filesystem will be automatically checked every 39 mounts or[/B][/COLOR]
[COLOR=blue][B]180 days, whichever comes first. Use tune2fs -c or -i to override.[/B][/COLOR]
format /data with type ext3
Code:
mke2fs -j /dev/block/mmcblk0p26
mke2fs 1.40.8 (13-Mar-2008)
Warning: 256-byte inodes not usable on older systems
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
75200 inodes, 300799 blocks
15039 blocks (5.00%) reserved for the super user
[B]First data block=0[/B]
Maximum filesystem blocks=310378496
10 block groups
32768 blocks per group, 32768 fragments per group
7520 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
[COLOR=blue]Warning: could not read block 0: [/COLOR]
[COLOR=blue]Attempt to read block from filesystem resulted [/COLOR][COLOR=blue]in short read[/COLOR]
[COLOR=blue]Writing inode tables: done[/COLOR]
[COLOR=blue]Creating journal (8192 blocks): done[/COLOR]
[B][COLOR=blue]Writing superblocks and filesystem accounting information: done[/COLOR][/B]
[COLOR=blue][B]This filesystem will be automatically checked every 22 mounts or[/B][/COLOR]
[COLOR=blue][B]180 days, whichever comes first. Use tune2fs -c or -i to override[/B][/COLOR].
Not identical but market related to this thread http://forum.xda-developers.com/showthread.php?t=1141843
Sent from my HTC Desire S using XDA Premium App
Sorry to hear that mate, Have you tried flashing a custom recovery and format the partitions in ext4 format, cause as far as I know DS default partition format is ext4...
zorbakun said:
Sorry to here that mate, Have you tried flashing a custom recovery and format the partitions in ext4 format, cause as far as I know DS default partition format is ext4...
Click to expand...
Click to collapse
thanx for reply...
but my friend's DS shows:
Code:
/dev/block/mmcblk0p25 on /system type [B]ext3[/B] (rw,relatime,errors=continue,barrier=0,data=writeback)
/dev/block/mmcblk0p26 on /data type[B] ext3 [/B](rw,relatime,errors=continue,barrier=0,
data=writeback)
/dev/block/mmcblk0p27 on /cache type [B]ext3[/B] (rw,nodev,noatime,nodiratime,errors=co
ntinue,barrier=0,data=writeback)
/dev/block/mmcblk1p1 on /sdcard type vfat (rw,relatime,fmask=0000,dmask=0000,all
ow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-
ro)
Well, I'm quite sure the DS default partition format is ext4, mine is like wise ext4, you have got nothing to lose there, try to flash that customer recovery and format or convert your phone partitions to ext4, then flash any of the customs roms available around or a RUU if you want.
The easiest way to rectify is to RUU and start over. Unless you enjoy the frustration!
zorbakun said:
Well, I'm quite sure the DS default partition format is ext4, mine is like wise ext4, you have got nothing to lose there, try to flash that customer recovery and format or convert your phone partitions to ext4, then flash any of the customs roms available around or a RUU if you want.
Click to expand...
Click to collapse
thank you guys.
as i wrote above, i did RUU. and stuck at the updating screen.
could zorbakun tell me, how can i format the emmc with ext4(especially to cache)
download this Custom recovery, Flash it and there is an option to format/wipe the partitions in ext4 format or convert current ext3 to ext4, also try to flash one of the custom roms in the development section but first flash the custom recovery.
i ran fastboot oem boot, and got these info:
is there anything wrong about my cid?
Code:
... INFOsetup_tag addr=0xC0000100 cmdline add=0x8D09D070
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 0
INFOTAG:hwid 0x0
INFOTAG:skuid 0x28102
INFOTAG:hero panel = 0x400010
INFOTAG:engineerid = 0x0
INFOMCP dual-die
INFOMCP dual-die
INFOTAG:mono-die = 0x0
INFOTAG: PS ID = 0x0
INFODevice CID is super CID
INFOCID is super CID
INFOBackup CID is empty
INFOsetting->[COLOR="Red"][B]cid::11111111[/B][/COLOR]
INFOserial number: SH*********8
INFOcommandline from head: no_console_suspend=1
INFOcommand line length =533
INFOactive commandline: board_saga.disable_uart2=0 board_saga.us
INFOb_h2w_sw=0 board_saga.disable_sdcard=0 diag.enabled=0 board_
INFOsaga.debug_uart=0 smisize=0 userdata_sel=0 androidboot.emmc=
INFOtrue androidboot.pagesize=4096 androidboot.baseband=38.03.0
INFO2.15_M androidboot.[COLOR="Red"][B]cid=11111111[/B][/COLOR] androidboot.batt_poweron=goo
INFOd_battery androidboot.carrier=ALL androidboot.mid=PG88*****
INFOandroidboot.keycaps=qwerty androidboot.mode=normal androidbo
INFOot.serialno=SH*********8 androidboot.bootloader=0.98.0000 zy
INFOgote_oneshot=off msm_watchdog.enable=1 kmemleak=off no_conso
INFOle_suspend=1
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=cache
INFOaARM_Partion[5].name=userdata
INFOaARM_Partion[6].name=devlog
INFOaARM_Partion[7].name=pdata
INFOpartition number=8
INFOValid partition num=8
INFOjump_to_kernel: machine_id(3107), tags_addr(0x4400100), kern
INFOel_addr(0x4408000)
INFO-------------------hboot boot time:80883 msec
FAILED (status read failed (Too many links))
Edit: INFOsetting->cid::11111111 means it's super cid, and super cid is good!
It's the very same thing as what happened to me, thought I haven't done deep debugging like you did and my device is S-ON. I did step 5 and my device froze at updating bootloader too. I guess there is something wrong with the phone, I'm worried about this massive market update issue. Maybe you'll be able to provide some more informations.
Also, I'm very sorry to hear this, I hope you'll be able to fix it asap, as this is very strange issue (how can market or battery pulled out brick phone???).
Numline1 said:
(how can market or battery pulled out brick phone???.
Click to expand...
Click to collapse
indeed!!!!
well, i'm kinda glad i'm not the only one with this problem... so far, the phone is still working and only sometimes crashes, so i can live with it...
i guess replacing the chip as mentioned in the first post requires sending the device to htc... would that cost anything with my xtc-clip-s-offed device? if so, how much? an estimate would be nice...
szallah said:
well, i'm kinda glad i'm not the only one with this problem... so far, the phone is still working and only sometimes crashes, so i can live with it...
i guess replacing the chip as mentioned in the first post requires sending the device to htc... would that cost anything with my xtc-clip-s-offed device? if so, how much? an estimate would be nice...
Click to expand...
Click to collapse
if ur DS is S-OFF and can't be succeed in wipe data/cache, can't mount nor open...
i did this replacement in our local-telecomm-market not htc official service.
that cost me US$60.
Same happened to me DAMMIT !!! What can i do? Tell me
All you need do is reflash Recovery and fresh install your rom. DO NOT RUN FLASH THE Nandroid BACK UP. Use PB88 the method.
Replace the chip? lol.
wait wait wait. I had a problem, that my phone wouldn't boot up after a radio flash. In recovery it said
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
I restored a nandroid backup and it booted up, with the new radio (i checked), What should i do now?
There are 2 issues that can cause these errors.
1) Messed up Partition table,
2) Broken eMMC chip (or more specifically, chip controller)
Issue 1 can be fixed by fixing the Partition table, which can be acheived by flashing an RUU.
Issue 2 cannot be fixed. (Unless you're a confident solder-er and know what you're doing, which chip to replace)
It is a hardware issue and your device will have to be returned.
Luckily, We don't know of anyone who has had an issue returning a rooted, s-off device.
There is more information in this thread, as well as how to know definatley whether you have the broken chip or not.
-Nipqer
Nipqer said:
There are 2 issues that can cause these errors.
1) Messed up Partition table,
2) Broken eMMC chip (or more specifically, chip controller)
Issue 1 can be fixed by fixing the Partition table, which can be acheived by flashing an RUU.
Issue 2 cannot be fixed. (Unless you're a confident solder-er and know what you're doing, which chip to replace)
It is a hardware issue and your device will have to be returned.
Luckily, We don't know of anyone who has had an issue returning a rooted, s-off device.
There is more information in this thread, as well as how to know definatley whether you have the broken chip or not.
-Nipqer
Click to expand...
Click to collapse
The partition table is written specifically by Recovery, therefore flashing a new Recovery should write a new partition table. As for a hardware error? I doubt if the phone would boot properly after the third of fourth time if this were the case. A hardware problem causes software errors which spreads quickly like a virus, and because there's an error, the phone gets gunked up and cannot be fixed by a wipe.
What solved the issue? I have the same problem... (
If you have the broken chip, you'll have to return it and get it replaced under warranty.
-Nipqer
Hi,it all started after i flashed TWRP in my HTC sensation xe(i had 4EXT recovery),then i wanted to flash a new rom but something happened and my htc freezed and then i pulled out the battery and inserted it,i turned it On but then it couldn't mount the system,cache,data.One of my friends managed to flash again the 4EXT recovery and told me that my partitions are corrupted.I tried some metjods with adb but nothing happened,
</tmp/mkfs.ext4 -b 4096 -O ^huge_file,^dir_nlink,^ext_attr,^resize_inode,^ext ra_isize -m 0 /dev/block/mmcblk0p37> but it says <no such file or directory>
and also tried this <parted /dev/block/mmcblk0 mkfs ext2> but it says <can't have overlapping partitions>
noutsos said:
Hi,it all started after i flashed TWRP in my HTC sensation xe(i had 4EXT recovery),then i wanted to flash a new rom but something happened and my htc freezed and then i pulled out the battery and inserted it,i turned it On but then it couldn't mount the system,cache,data.One of my friends managed to flash again the 4EXT recovery and told me that my partitions are corrupted.I tried some metjods with adb but nothing happened,
</tmp/mkfs.ext4 -b 4096 -O ^huge_file,^dir_nlink,^ext_attr,^resize_inode,^ext ra_isize -m 0 /dev/block/mmcblk0p37> but it says <no such file or directory>
and also tried this <parted /dev/block/mmcblk0 mkfs ext2> but it says <can't have overlapping partitions>
Click to expand...
Click to collapse
do you have access to the bootloader/recovery?
noutsos said:
Hi,it all started after i flashed TWRP in my HTC sensation xe(i had 4EXT recovery),then i wanted to flash a new rom but something happened and my htc freezed and then i pulled out the battery and inserted it,i turned it On but then it couldn't mount the system,cache,data.One of my friends managed to flash again the 4EXT recovery and told me that my partitions are corrupted.I tried some metjods with adb but nothing happened,
</tmp/mkfs.ext4 -b 4096 -O ^huge_file,^dir_nlink,^ext_attr,^resize_inode,^ext ra_isize -m 0 /dev/block/mmcblk0p37> but it says <no such file or directory>
and also tried this <parted /dev/block/mmcblk0 mkfs ext2> but it says <can't have overlapping partitions>
Click to expand...
Click to collapse
I have the same problem with you,,,I have not fix it at all,,,maybe we can ask @shantur for help,,,
which rom and the TWRP version do you use???
[email protected] said:
I have the same problem with you,,,I have not fix it at all,,,maybe we can ask @shantur for help,,,
which rom and the TWRP version do you use???
Click to expand...
Click to collapse
i can access my 4est recovery but i dont have a rom,after flashing one my phone stucks in the logo
noutsos said:
i can access my 4est recovery but i dont have a rom,after flashing one my phone stucks in the logo
Click to expand...
Click to collapse
are you on S-ON?
post your bootloader details
rzr86 said:
are you on S-ON?
post your bootloader details
Click to expand...
Click to collapse
i am S OFF
firmware 3.33
hboot 1.27.1100
radio 11.24A.3504.31_M
noutsos said:
i am S OFF
firmware 3.33
hboot 1.27.1100
radio 11.24A.3504.31_M
Click to expand...
Click to collapse
ok probably you need to update 4ext version to the latest
also redownload the rom
by the way which rom did you try to flash?
rzr86 said:
ok probably you need to update 4ext version to the latest
also redownload the rom
by the way which rom did you try to flash?
Click to expand...
Click to collapse
i tried to flash viperS 5.1.0
i tried to flash the stock,when i do factory reset it says "E:formate_volume: make_extf4fs failed on /dev/block/mmcblk0p24"
and then i reboot and stucks in htc logo
noutsos said:
i tried to flash viperS 5.1.0
i tried to flash the stock,when i do factory reset it says "E:formate_volume: make_extf4fs failed on /dev/block/mmcblk0p24"
and then i reboot and stucks in htc logo
Click to expand...
Click to collapse
use the option format all partitions except sdcard from 4ext
then reflash the rom
which version of 4ext do you have?
rzr86 said:
use the option format all partitions except sdcard from 4ext
then reflash the rom
which version of 4ext do you have?
Click to expand...
Click to collapse
version 1.0.0.5 RC5
but the same thing occurs,in system is blk0p22,in data number23,in cache number24
when i try to flash custo rom it says installation aborted
noutsos said:
version 1.0.0.5 RC5
but the same thing occurs,in system is blk0p22,in data number23,in cache number24
when i try to flash custo rom it says installation aborted
Click to expand...
Click to collapse
here is the latest version of 4ext
http://www.4shared.com/zip/WnSyLWMaba/4EXT_Recovery_Touch_v1006_RC3_.html
extract the recovery.img and flash it via fastboot command
but probably your emmc is corrupted unfortunately
by the way did you try a ruu.exe?
rzr86 said:
here is the latest version of 4ext
http://www.4shared.com/zip/WnSyLWMaba/4EXT_Recovery_Touch_v1006_RC3_.html
extract the recovery.img and flash it via fastboot command
but probably your emmc is corrupted unfortunately
by the way did you try a ruu.exe?
Click to expand...
Click to collapse
tried ruu exe but nth happened,cant find the device,and cant fastboot
How does fastboot not work? Does usb not connect at all?
Hey guys, any news about fixing bug in TWRP which caused corrupting partitions and bricking phones?
Hi guys,
I have the same issue as OP, however only the /data won't get mounted. My phone got stuck while doing wipe of the data partition in TWRP 2.6.3.0 (it didn't freeze, but it was taking over 40 minutes already), so I had to take the battery out and put it back in.
First, I tried using TWRP 2.6.3.0 to perform the wipe again, but I got
Code:
E:Unable to mount '/data'
I got the same error when I tried to install any ROM, so the installation got aborted.
Then I flashed 4EXT Recovery Touch v1.0.0.6 RC3 through fastboot and did Format all partitions (except sdcard). The format went fine with no errors, however when I tried to flash any ROM (I tried CyanogenMod 11 with 3.0.16 kernel by sultanxda and Slimkat specifically), I get:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/Slim-pyramid-4.4.4.build.7.8-WEEKLY-6262.zip (Status 7)
Installation aborted.
Same happens with the CM11 ROM. I also tried performing the full format with 4EXT recovery, then flashing the ROMs with TWRP. Same problem as before, Unable to mount '/data'.
Here is my bootloader info:
S-OFF
Firmware 3.33
HBOOT 1.27.1100
Radio 11.24A.3504.31_M
I am pretty much desperate at this point. Is there any way or chance of fixing my partitions? I haven't tried fixing it using parted, because I was unable to find a good howto for Sensation. I would be happy for any advice.
MatesCZ said:
Then I flashed 4EXT Recovery Touch v1.0.0.6 RC3 through fastboot and did Format all partitions (except sdcard). The format went fine with no errors, however when I tried to flash any ROM (I tried CyanogenMod 11 with 3.0.16 kernel by sultanxda and Slimkat specifically), I get:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/Slim-pyramid-4.4.4.build.7.8-WEEKLY-6262.zip (Status 7)
Installation aborted.
Same happens with the CM11 ROM. I also tried performing the full format with 4EXT recovery, then flashing the ROMs with TWRP. Same problem as before, Unable to mount '/data'..
Click to expand...
Click to collapse
i think something is wrong with the rom zip or with sdcard
try to redownload the rom and flash it again with 4ext recovery
or try to flash a different rom
rzr86 said:
i think something is wrong with the rom zip or with sdcard
try to redownload the rom and flash it again with 4ext recovery
or try to flash a different rom
Click to expand...
Click to collapse
Here is what I did:
- Formatted the SD card
- Put CM11, Slimkat and ViperS/C2 5.2.1 on it
- Checked MD5/SHA1 sums for each of them
- Went to 4EXT, performed full format
- Tried to flash Slimkat first, same result as before:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/Slim-pyramid-4.4.4.build.7.8-WEEKLY-6262.zip (Status 7)
Installation aborted.
- Tried to flash ViperS, the installer went through fine, no errors, however, after exiting the installer, 4EXT recovery window was showing:
Code:
Starting AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
E:Error in /sdcard/ViperSC2_5.2.1.zip
(Status 0)
Installation aborted.
Tried to reboot anyway, but phone is stuck on the Sensation logo
MatesCZ said:
Here is what I did:
- Formatted the SD card
- Put CM11, Slimkat and ViperS/C2 5.2.1 on it
- Checked MD5/SHA1 sums for each of them
- Went to 4EXT, performed full format
- Tried to flash Slimkat first, same result as before:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/Slim-pyramid-4.4.4.build.7.8-WEEKLY-6262.zip (Status 7)
Installation aborted.
- Tried to flash ViperS, the installer went through fine, no errors, however, after exiting the installer, 4EXT recovery window was showing:
Code:
Starting AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
E:Error in /sdcard/ViperSC2_5.2.1.zip
(Status 0)
Installation aborted.
Tried to reboot anyway, but phone is stuck on the Sensation logo
Click to expand...
Click to collapse
in both cases the issue is the sdcard as i see
i suggest to format your sdcard
backup first whatever you need
or if you have a different sdcard try to flash the rom with that one
rzr86 said:
in both cases the issue is the sdcard as i see
i suggest to format your sdcard
backup first whatever you need
or if you have a different sdcard try to flash the rom with that one
Click to expand...
Click to collapse
As I mentioned, I did format the SD card before trying.
Also today I tried with different, definitely working SD card (also formatted before trying) - same results as mentioned before. Doesn't seem to be SD card-related.
I also tried flashing stock ROM from RUU by extracting the rom.zip and renaming it to P58IMG.zip - the process gets stuck at
Code:
[6] USERDATA -Updating
forever. This consequently locked my bootloader, but I was able to unlock it again using fastboot.
I managed to retrieve log from 4EXT, and this is what it says during format of everything:
Code:
About to format everything..
..except your fat32 partition
Format BOOT SYSTEM DATA CACHE SD-EXT..?
Formatting /boot...
I:Formatting unknown device.
Formatting /system...
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=64 blocks, Stripe width=64 blocks
51296 inodes, 204799 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
7 block groups
32768 blocks per group, 32768 fragments per group
7328 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840
Allocating group tables: 0/7 done
Writing inode tables: 0/7 done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: 0/7 done
-- Wiping data...
Formatting /data...
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=64 blocks, Stripe width=64 blocks
76480 inodes, 305852 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
10 block groups
32768 blocks per group, 32768 fragments per group
7648 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Allocating group tables: 0/10 done
Writing inode tables: 0/10 done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: 0/10 done
Formatting /cache...
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=64 blocks, Stripe width=64 blocks
30720 inodes, 30709 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
1 block group
32768 blocks per group, 32768 fragments per group
30720 inodes per group
Allocating group tables: 0/1 done
Warning: could not read block 0: Attempt to read block from filesystem resulted in short read
Writing inode tables: 0/1 done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: 0/1 done
W:failed to mount /dev/block/mmcblk0p24 (Invalid argument)
W:failed to mount /dev/block/mmcblk0p24 (Invalid argument)
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
Data wipe complete.
All internal partitions have been formatted.
This includes dalvik-cache and batt stats
since they are just files / directories.
Your sdcard(s) weren't touched
no worries.
These lines in particular are most likely related to the problem
Warning: could not read block 0: Attempt to read block from filesystem resulted in short read
...
W:failed to mount /dev/block/mmcblk0p24 (Invalid argument)
W:failed to mount /dev/block/mmcblk0p24 (Invalid argument)
Click to expand...
Click to collapse
MatesCZ said:
As I mentioned, I did format the SD card before trying.
Also today I tried with different, definitely working SD card (also formatted before trying) - same results as mentioned before. Doesn't seem to be SD card-related.
I also tried flashing stock ROM from RUU by extracting the rom.zip and renaming it to P58IMG.zip - the process gets stuck at
Code:
[6] USERDATA -Updating
forever. This consequently locked my bootloader, but I was able to unlock it again using fastboot.
I managed to retrieve log from 4EXT, and this is what it says during format of everything:
Code:
About to format everything..
..except your fat32 partition
Format BOOT SYSTEM DATA CACHE SD-EXT..?
Formatting /boot...
I:Formatting unknown device.
Formatting /system...
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=64 blocks, Stripe width=64 blocks
51296 inodes, 204799 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
7 block groups
32768 blocks per group, 32768 fragments per group
7328 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840
Allocating group tables: 0/7 done
Writing inode tables: 0/7 done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: 0/7 done
-- Wiping data...
Formatting /data...
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=64 blocks, Stripe width=64 blocks
76480 inodes, 305852 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
10 block groups
32768 blocks per group, 32768 fragments per group
7648 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Allocating group tables: 0/10 done
Writing inode tables: 0/10 done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: 0/10 done
Formatting /cache...
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=64 blocks, Stripe width=64 blocks
30720 inodes, 30709 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
1 block group
32768 blocks per group, 32768 fragments per group
30720 inodes per group
Allocating group tables: 0/1 done
Warning: could not read block 0: Attempt to read block from filesystem resulted in short read
Writing inode tables: 0/1 done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: 0/1 done
W:failed to mount /dev/block/mmcblk0p24 (Invalid argument)
W:failed to mount /dev/block/mmcblk0p24 (Invalid argument)
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
Data wipe complete.
All internal partitions have been formatted.
This includes dalvik-cache and batt stats
since they are just files / directories.
Your sdcard(s) weren't touched
no worries.
These lines in particular are most likely related to the problem
Click to expand...
Click to collapse
yeah you are right
some partitions are broken probably from TWRP because a lot of users faced issues similar with yours
someone posted a solution few days ago how to boot a rom from sdcard
he had also broken partitions in internal memory caused from TWRP and he managed to boot a rom from sdcard
he created two partitions
one to be recognized as /data and one to be recognized as /system and mounted them successfully(if i remember well)
but i can't find that post
if i find it i will come with edit
hi
at first i have to say my English is not good!!
i have a tf700 and last night i installed CROMBi-kk on it after that because of lots of apps that i installed in past it had lots of lag then i decided to wipe my data so i went to twrp and did a full wipe but in middle of that battery ran out. i install CROMBi-kk again but it stuck on boot logo!!!
i think there is no partition on it!!
UNFORTUNATELY I DON'T HAVE ANY BACKUP!!
PLZ HELP!!!!!
thank you!!
Need more information.
Which bootloader are you on?
Which kernel are you on?
Which kernel did you choose?
Internal install? rom2sd? data2sd?
Which options?
recovery.log?
aroma.log?
sbdags said:
Need more information.
Which bootloader are you on?
Click to expand...
Click to collapse
android cardhu-user bootloader <1.00 e> released by "ww_epad-10.6.1.14.10-20130801" a03
sbdags said:
Which kernel are you on?
Which kernel did you choose?
Click to expand...
Click to collapse
_that modded Asus OC Kernel v10
sbdags said:
Internal install? rom2sd? data2sd?
Click to expand...
Click to collapse
internal install
sbdags said:
Which options?
Click to expand...
Click to collapse
data journaling is enable
sbdags said:
recovery.log?
aroma.log?
Click to expand...
Click to collapse
E:could not mount /data and unable to find crypto footer
E: unable to mount ' /data '
E: unable to recreat /data/media folder.
Updating partition details. . .
E: unable to mount ' /data '
E: unable to mount internal storage.
E: unable to mount /data /media during GUI startup.
full SELinux support is present.
E: unable to mount /data/media/twrp/ .twrps when trying to read settings file.
E: no valid storage partition found for MTP
E: unable to mount ' /data '
E: unable to mount ' /data '
in bootloader there is a line that say " key driver not found.. booting os
on detecting file system phase :
/data on internal (UDA) -> unknown
hoseinkh said:
android cardhu-user bootloader <1.00 e> released by "ww_epad-10.6.1.14.10-20130801" a03
_that modded Asus OC Kernel v10
internal install
data journaling is enable
E:could not mount /data and unable to find crypto footer
E: unable to mount ' /data '
E: unable to recreat /data/media folder.
Updating partition details. . .
E: unable to mount ' /data '
E: unable to mount internal storage.
E: unable to mount /data /media during GUI startup.
full SELinux support is present.
E: unable to mount /data/media/twrp/ .twrps when trying to read settings file.
E: no valid storage partition found for MTP
E: unable to mount ' /data '
E: unable to mount ' /data '
in bootloader there is a line that say " key driver not found.. booting os
on detecting file system phase :
/data on internal (UDA) -> unknown
Click to expand...
Click to collapse
Ignore the key driver message - we all get it.
So you /data partition is not in a recognisable format and cannot be mounted. Please format it in TWRP or from adb use this command when in TWRP (make sure MTP is turned off)
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
or in the bootloader use this:
Code:
fastboot erase userdata
sbdags said:
Ignore the key driver message - we all get it.
So you /data partition is not in a recognisable format and cannot be mounted. Please format it in TWRP or from adb use this command when in TWRP (make sure MTP is turned off)
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
or in the bootloader use this:
Code:
fastboot erase userdata
Click to expand...
Click to collapse
Code:
C:\adb>fastboot erase userdata
^C
C:\adb>
C:\adb>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ $ killall -19 recovery
killall -19 recovery
killall: recovery: no process killed
1|[email protected]:/ $ make_ext4fs /dev/block/mmcblk0p8
make_ext4fs /dev/block/mmcblk0p8
Need size of filesystem
1|[email protected]:/ $ reboot
reboot
reboot: Operation not permitted
1|[email protected]:/ $
how to turn off mtp??
when i select format data from TWRP it stuck on " formatting data using make_ext4fs function" and even after 30 min nothing happen!!
thank you man!!
it's finally worked!!
Thank you for your attention and answers!!
hoseinkh said:
thank you man!!
it's finally worked!!
Thank you for your attention and answers!!
Click to expand...
Click to collapse
You are welcome!
Which one worked?
sbdags said:
You are welcome!
Which one worked?
Click to expand...
Click to collapse
Code:
fastboot earase userdata
erase data failed
I just get the following:
fastboot earase userdata
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
FAILED (remote: failed to erase partition
)
finished. total time: 5.065s
device is unlocked, hang in bootloop, tried flashing but:
E: Unable to mount '/cache'
E: Unable to mount '/cache'
E: Unable to mount /data/meida/TWRP/ . twrps when trying to read settings file.
E: No valid storage partitions found for MTP.
E: Unable to mount '/data'
E: Unable to mount '/data'
thanks for your answers.
homer56 said:
E: Unable to mount '/data'
Click to expand...
Click to collapse
In TWRP, go to wipe -> advanced -> format data. This can take more than an hour, so be patient.
Hello,
My phone fell to the floor and since than can't boot.
I see the google logo and then it turning off.
I can't enter recovery mode.
I can enter bootloader mode, tried to re-flash the rom (factory) with -w (wipe) and still can't boot / enter recovery mode.
Any suggestions?
Thanks!
time for a new phone
If the screen is okay, get a nexus 5 with a busted screen and swap internal components.
I have the same problem, but allow me to add some more details:
When trying to go to recovery, i got a dead droid with a red sign on it. See my post on android enthusiasts: /questions/169999/stuck-in-bootloop-and-flash-recovery-doesnt-work-on-nexus-5/170395 (can't post url from my account)
From fast boot, I could flash a recovery (my fastboot is unlocked) but it gave no results: still had the dead droid (tried with twrp, cwm, and stock rom).
After that I gave up trying to get back my data and tried flashing the whole stock rom, but it when bad. Now when trying to flash anything I got errors:
Code:
$ sudo ./fastboot flash cache cache.img
target reported max download size of 1073741824 bytes
erasing 'cache'...
OKAY [ 0.125s]
sending 'cache' (13348 KB)...
OKAY [ 0.630s]
writing 'cache'...
FAILED (remote: flash write failure)
finished. total time: 0.936s
- or -
Code:
$ sudo ./fastboot flash system system.img
target reported max download size of 1073741824 bytes
erasing 'system'...
FAILED (remote: failed to erase partition)
finished. total time: 0.118s
The only good news is I realized I could boot to any arbitrary recovery without flashing it with:
Code:
$ sudo ./fastboot boot recovery.img.twrp
Most functions on recory wouldn't work (it says it can't mount most partitions), but from where I can get an
Code:
adb shell
. I tried various steps but without success so far:
Code:
~ # e2fsck /dev/block/platform/msm_sdcc.1/by-name/recovery
e2fsck 1.41.14 (22-Dec-2010)
e2fsck: Superblock invalid, trying backup blocks...
e2fsck: Bad magic number in super-block while trying to open /dev/block/platform/msm_sdcc.1/by-name/recovery
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
Code:
~ # e2fsck /dev/block/platform/msm_sdcc.1/by-name/system
e2fsck 1.41.14 (22-Dec-2010)
system: clean, 1939/65536 files, 254904/262144 blocks
Code:
~ # e2fsck /dev/block/platform/msm_sdcc.1/by-name/cache
e2fsck 1.41.14 (22-Dec-2010)
/dev/block/platform/msm_sdcc.1/by-name/cache: recovering journal
Superblock needs_recovery flag is clear, but journal has data.
Run journal anyway<y>? y
yes
e2fsck: unable to set superblock flags on /dev/block/platform/msm_sdcc.1/by-name/cache
I think I managed to somehow mess up my partition system, and I don't know much how to recover it, anyone have clues or can suggest something ?
You may need to replace the power button on the motherboard. If the phone keeps booting and then restarting when the Google logo appears, the power button might be your culprit. It was for me, and after a trip to my local repair shop, it is as good as new.
Fvolfrine said:
You may need to replace the power button on the motherboard. If the phone keeps booting and then restarting when the Google logo appears, the power button might be your culprit. It was for me, and after a trip to my local repair shop, it is as good as new.
Click to expand...
Click to collapse
The power button works fine on my phone. It's isn't constantly rebooting, but it gets stuck at the booting animation. I can use the power normally in the bootloader and it behaves as expected.
biaib said:
The power button works fine on my phone. It's isn't constantly rebooting, but it gets stuck at the booting animation. I can use the power normally in the bootloader and it behaves as expected.
Click to expand...
Click to collapse
I have the same problem sir.
were you able to solve your issue?
If yes please explain how?
If the phone is stuck at the boot animation, try flashing the oldest Kit Kat ROM from the Google site: https://developers.google.com/android/images
ahiel2 said:
Hello,
My phone fell to the floor and since than can't boot.
I see the google logo and then it turning off.
I can't enter recovery mode.
I can enter bootloader mode, tried to re-flash the rom (factory) with -w (wipe) and still can't boot / enter recovery mode.
Any suggestions?
Thanks!
Click to expand...
Click to collapse
Well I Still am trying to fix that issue since almost 2 years now.....
My guesses are that eMMC is damaged when you thre your phone.
If you do find a solution please do let me know.
Thanks!
I have batik recovery installed in ma phn..so when I try to update the ota(for Redmi 5) the 606mb update , then I got something like this
Code:
- Encrypted data, keep forceencrypt
- Target image: /dev/block/mmcblk0p21
Failed to unmount /system: Device or resource busy
script succeeded: result was [1.000000]
SaɧItaN said:
I have batik recovery installed in ma phn..so when I try to update the ota(for Redmi 5) the 606mb update , then I got something like this
Code:
- Encrypted data, keep forceencrypt
- Target image: /dev/block/mmcblk0p21
Failed to unmount /system: Device or resource busy
script succeeded: result was [1.000000]
Click to expand...
Click to collapse
Did you resolve it?