Related
I come from the world of Windows Mobile and have just recetly delved into hacking my G1. While I've had no problems installing jesusfreke's images or themes...I'm struggling with how to get fastboot to work.
Perhaps someone can give me some guidance. Anyone willing to give me some simple step by step instructions. I've searched for this and i think I have everything i need, but I'm unable to get to a point where I can type in commands. when i try to run adb, it open very briefly and closes.
What am i doing wrong?
Thanks,
Jason
Go to start -> run -> type in CMD
Navigate to the folder where adb is located.
Then type in adb devices to see if it finds ur device.
If not then make sure you have it plugged in and USB debugging is turned on in the phones settings under Development.
Also download the usb drivers/or the whole SDK if you havent yet.
nosaj13 said:
when i try to run adb, it open very briefly and closes.
Click to expand...
Click to collapse
If you try to execute a text mode executable in windows, it will close the terminal window as soon as the program finishes. If you run adb without any arguments, it will print the arguments out terminate. I could say the solution is to open run as and type cmd, but the true answer is to install Linux
nosaj13 said:
I come from the world of Windows Mobile and have just recetly delved into hacking my G1. While I've had no problems installing jesusfreke's images or themes...I'm struggling with how to get fastboot to work.
Perhaps someone can give me some guidance. Anyone willing to give me some simple step by step instructions. I've searched for this and i think I have everything i need, but I'm unable to get to a point where I can type in commands. when i try to run adb, it open very briefly and closes.
What am i doing wrong?
Thanks,
Jason
Click to expand...
Click to collapse
1. Download this
2. Extract the contents of the fastboot directory to the root of your C drive.
3. Go Start -> Run -> type 'cmd' (no quotes) and hit enter
4. Type 'c:' (no quotes) and hit enter
5. With your phone plugged in, you should be able to type 'adb devices' and it should return your phones serial number, which is usually in HTXXXXXXXX format. If it does not, make sure debugging is enabled on your phone and you have the adb drivers installed.
6. type 'adb shell reboot bootloader' and hit enter. The screen on your phone will go blank for a second and then you should be in the SPL with the skating androids. Make sure you see "FASTBOOT" at the bottom of the screen.
7. type 'fastboot devices' and hit enter. If you see your phone's serial number again, you have successfully established a fastboot connection with the phone and can run commands such as:
fastboot erase <partition> (erases the given partition)
fastboot flash <partition> <file.img> (overwrites and flashes given partition with given file. This is how one would restore from a nandroid backup)
fastboot reboot (reboots the device into user mode)
Hope that helps. Have fun
when i type adp devices i get an error that says "adp is not recognized as an internal or external command, operable program, or batch file"
what am i doing wrong?
nosaj13 said:
when i type adp devices i get an error that says "adp is not recognized as an internal or external command, operable program, or batch file"
what am i doing wrong?
Click to expand...
Click to collapse
First, the command is adb devices not adp. Second, make sure you copied the contents of the fastboot directory to the C drive. Third, make sure you that when you type 'c:' into the command line, the command prompt actually changes to "C:\>"
Datruesurfer said:
1. Download this
2. Extract the contents of the fastboot directory to the root of your C drive.
3. Go Start -> Run -> type 'cmd' (no quotes) and hit enter
4. Type 'c:' (no quotes) and hit enter
5. With your phone plugged in, you should be able to type 'adb devices' and it should return your phones serial number, which is usually in HTXXXXXXXX format. If it does not, make sure debugging is enabled on your phone and you have the adb drivers installed.
6. type 'adb shell reboot bootloader' and hit enter. The screen on your phone will go blank for a second and then you should be in the SPL with the skating androids. Make sure you see "FASTBOOT" at the bottom of the screen.
7. type 'fastboot devices' and hit enter. If you see your phone's serial number again, you have successfully established a fastboot connection with the phone and can run commands such as:
fastboot erase <partition> (erases the given partition)
fastboot flash <partition> <file.img> (overwrites and flashes given partition with given file. This is how one would restore from a nandroid backup)
fastboot reboot (reboots the device into user mode)
Hope that helps. Have fun
Click to expand...
Click to collapse
i did all the above steps with no problem at all till i got to number 7. when i typed in fastboot devices it just goes to the next prompt without my phone showing up.
If i plug in my g1 in normal mode i see it at the top under adb and in the usb section as a mass storage device.
In bootloader mode with fastboot on the screen it doesnt show up anywhere in the device manager.
Also when i follow the above quoted steps and type in the "adb shell reboot bootloader" and hit enter i hear the ding you hear when you unplug a usb device, and all instances of the phone then leave the device manager.
i have also uninstalled and reinstalled all drivers for the phone and all drivers that have to do with the usb ports on my win xp machine.
Anyone have any ideas i could try?
I think you need this program. I put it on my desktop, then just ran cmd, directed to it, and type in fastboot.
I7oobie said:
I think you need this program. I put it on my desktop, then just ran cmd, directed to it, and type in fastboot.
Click to expand...
Click to collapse
thats not it. i have that in the sys 32 folder and also on desktop
Fastboot mode not recognized
I'm having the same problem. I've installed all the correct drivers and in normal mode, I see the Android Composite Device (or something similar) in Device Manager.
As soon as I go into SPL mode (the 3 skateboarding androids screen), the device does not show up.
Anyone have any ideas? Thanks!
Datruesurfer said:
First, the command is adb devices not adp. Second, make sure you copied the contents of the fastboot directory to the C drive. Third, make sure you that when you type 'c:' into the command line, the command prompt actually changes to "C:\>"
Click to expand...
Click to collapse
When I'm in the Command Prompt and I type C:, the directory still reads C:\Documents and Setting\Reids. It won't change to only C:
Hi,
You have to do this to get back to c:
cd\
press enter
That should do it.
bestwebs said:
Hi,
You have to do this to get back to c:
cd\
press enter
That should do it.
Click to expand...
Click to collapse
Ok, thanks a lot. Got it working now.
I need help trying to flash my cupcake images that I have stored in my fastboot folder. I attached the pictures below. I will accept any help I can get.
EDIT: Doh, I thought I was in another topic.
My bad.
Are adb & adb's dll files located inside the same folder as fastboot??? They are suppose too be.
Is your usb cord directly plugged into your system or thru a hub??
Your phone, i bet is under usb mass....to check, expand your device manager window.
Expand your USB-Mass storage list.
With your phone in fastboot mode, click on the camera key and the back key. With enough time inbetween for your system to recognize that there might be a device hooked up.
Notice any change in the list??
Anyone wanting good instructions
http://androidcommunity.com/forums/f28/nandroid-v2-0-full-nand-backup-and-restore-tool-9336/
Read post 2 and go!
this seems like the most easiest thing to do but i still cant get it to work
i have downloaded everything needed and see ADB Interface on my device manager with a yellow mark on it when i try to update the dirver it fails and i got the drivers and point them to it but seems not to work
my phone is on the fastboot screen with the android skateboards guys
i dont know whats going on if someone know what am also doing wrong can tell me please...
This is what i get
Hi everyone,
I have looked everywhere on google and have been at this for over 5 hours now. I have tried rooting my phone from 3 different PCs (XP SP3, SP2 and 7). With all of them i have managed to get the drivers for adb installed (after many problems) and got all the way to the fastboot part of the rooting.
Once i get there, i have the same problem on all 3 PCs. ADB can no longer find my phone! Following the instructions, i checked for the device before i powered it off and found it by doing abd devices in cmd prompt. The moment the device is powered off and then back on, bam! No more device!
I am at my wits end at this point and just don't know what else I could possibly do! I would be immensely grateful for ANY advice.
I did check that my device allowed USB debug so that's not it either.
Also, my phone is a Rogers phone and I have just put through the upgrade they sent this morning.
adb cant find your phone in fastboot mode but fastboot can
Try writing fastboot devices instead of adb devices
All the comands in fastboot mode start with fastboot...e.g fastboot flash xxx xxx.img
I ran into this problem as well on my attempt, I forgot to re-enable (or enable) depending on where I was at "usb debugging" which is in:
settings> applications > development > check the usb debugging box.
After that, when you do abd devices in your shell, it should surely list after that. Good luck!
edit-- woops scratch that.. sorry I just read back that you made sure of that.
Thank you for that!
Now, i see it in fastboot, but when i try typing fastboot boot recovery.img i get a "cannot load recovery.img"
Sorry, apparently i need a lot more hand holding than i though!
(this is where I am getting the instructions from HowardForums. I'd post the link but I can't do that yet on this forum...
Basically, these are the instructions i am following:
If the phone you have is an HTC Magic (no hardware keyboard), the method is pretty much the same. I modified Haykuro's zip with files that were meant for the Magic. You can grab it here:
*link*
Again, open another command prompt as steps 2, and 6-8 are entered in the command prompt.
Quote:
Originally Posted by Haykuro-ish
0. Place update.zip on SD card.
1. power off the phone and boot into fastboot (hold back and power)
2. fastboot boot recovery.img
3 [optional]. make a backup with nandroid
3. apply update. (LET IT FINISH, DO NOT TOUCH ANYTHING UNTIL YOUR PHONE IS COMPLETELY IDLE. DO NOT TOUCH AFTER FIRST REBOOT (WHEN CHIP APPEARS) UNLESS YOU LIKE A BRICK. )
4. reboot out of recovery mode.
5. power off phone, hold back button and power to boot into fastboot again
6. fastboot flash boot boot.img
7. fastboot flash recovery recovery.img
8. fastboot reboot
enjoy!
These are pretty much the Haykuro instructions for the Dream, which I modified to apply to the Magic. The boot and recovery images were made by Amon_RA. Happy Rooting!
Just like with the Dream, the first part flashes a good SPL, the second flashes a rooted boot and recovery. The easiest way to test if the device is rooted is to open another command prompt in the tools dir and type
Code:
adb root
If it returns that adb is already running in root, then you're all set.
Click to expand...
Click to collapse
Am i doing something wrong?
Thanks so much!
You need to navigate to the folder where you saved your recovery.img
For example if you put it on d:/Android dev. you will need to do (inside cmd)
d: (switches to drive d
cd d:/Android dev. (changes the folder to android dev.)
and then issue the fastboot command
without the brackets of course...
eyegor said:
You need to navigate to the folder where you saved your recovery.img
For example if you put it on d:/Android dev. you will need to do (inside cmd)
d: (switches to drive d
cd d:/Android dev. (changes the folder to android dev.)
and then issue the fastboot command
without the brackets of course...
Click to expand...
Click to collapse
Again, thank you so much! It seems I am still having issues as now I'm being told that "remote not allow".... is this a rogers thing?
Again i do apologize for all the hand-holding necessary here
yes, i am getting this <remote:not allow> message too. I was able to fix my other magic (purchased in october) via fastboot boot recovery.img but not this new one i have (purchased in Dec).
Anyone have any ideas how to bypass this block of 'remote, not allowed"?
I've read a couple dozen of the pages from http://forum.xda-developers.com/showthread.php?t=1905674&page=95 titled
Nabi2 root and Gapps install
Click to expand...
Click to collapse
.
Using Win7 x64. Nabi2 version: 1.9.37 recently updated.
Can't post to above thread because this is my first post (restricted to "General" forums).
In "Jmz Nabi Recovery Installer" window it is always stuck in the "If stuck here drivers are not installed" step.
Prior to installing "PdaNet for Android" from http://junefabrics.com/index.php,
I had 2 devices in Control Panel under "Other devices" with a yellow '!'. One of the looked like the Nabi device. The other is named "MTP".
After installing PdaNet, only MTP remains with the yellow exclamation point.
What should the Nabi look like in the Control Panel if its properly configured with a driver and where would it be?
And what is MTP?
Apparently I'm still having a driver/connection problem from adb.
USB Debugging is on in the Nabi.
Put the nabi in 'fastboot' mode
Open a CMD Prompt and browse to the 'files' folder within 'jmzrootpackage'
Then type:
adb.exe
fastboot devices
It should return a value (fastboot working and drivers are installed)
Let me know how it goes.
Put the nabi in 'fastboot' mode
Open a CMD Prompt and browse to the 'files' folder within 'jmzrootpackage'
Then type:
adb.exe
Click to expand...
Click to collapse
Part of this command is missing right? Without input parms it just outputs the "uses" message.
fastboot devices
Click to expand...
Click to collapse
Unfortunately this returned nothing for me.
I'm glad you responded. Other suggestions?
Here is how i done it using Windows 8 x64
I done 3 nabi2's this way but had a lot of trouble first so here is what worked for me:
Sadly, i don't have any nabi2 with me now to explain exactly how i done it
1) First boot the Nabi2 normally and turn off usb debugging.
2) When fully booted connect USB cable.
3) Check device manager and drivers should be installed.
4) Unplug USB cable and turn on USB Debugging and Unknown Sources.
5) Reconnect USB Cable.
6) Drivers should install.
7) Install PDA Net on Laptop/PC
8) Select Samsung device from option screen when installing.
9) Wait for install to complete and drivers to install
10) Shut down Nabi2
11) Boot Nabi in fastboot (Hold + and Power buttons)
12) Select fastboot protocol
13) Here i seen Windows 8 take about 60 seconds installing fastboot drivers
To make sure fastboot drivers are installed i went to this thread
Code:
http://forum.xda-developers.com/showthread.php?t=1590800
and download ADB (save it to C:\SDK\platform-tools) and read over the helpful instructions in the thread.
Open command Prompt
Type the following (shown in RED) in the CMD window the opened:
cd\
cd C:\SDK\platform-tools
adb.exe (a list of options should be listed)
fastboot devices (it should list a number after you enter this)
If number displayed then you are good to go.
Reboot Nabi2 and wait to complete
Go to the location you saved jmzrootpackage
Go to files folder inside jmzrootpackage
Double click install.bat
Follow on screen prompts ( I took option 1)
TWRP recovery installs
I had trouble installing GAPPS.zip with an error being displayed about unable to mount /data
I copied GAPPS.zip to a SD Card and inserted to Nabi2
i install zip from EXT-SD Card even though it gives a load of errors about not able to mount /data
Wipe Cache/Dalvik
Reboot Nabi2
Go to daddy/mommy mode and you should have Google Apps installed.
Any problems let me know.
I'm using Windows 7 x64.
Your instructions with selecting "Samsung" for PdaNet install appears
to have done something right. So maybe I'm a little closer.
It completed the PdaNet install successfully and when I reconnect the
Nabi I see a message popup on Windows saying PdaNet connected something.
(It was too quick.)
So maybe I'm not doing the "Fastboot" portion correctly.
On Nabi hold <Power> and <Vol+> down at same time to turn it on.
Resulting Menu:
Boot Normally
Fastboot Protocol
Recovery Kernel
Forced Recovery
Use <Vol-> to move the selected item.
Moved selected item down to "Fastboot Protocol".
Use <Vol+> to "enter" selected item.
New Menu:
Bootloader
Continue
Reboot-bootloader
Reboot
Poweroff
Selected "Continue", and entered(<Vol+>).
At this point the Nabi boots up.
On PC in adminstrator mode for command window and with ALL anti-virus
security turned off:
> adb.exe kill-server
> adb.exe start-server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
> fastboot.exe devices
Nothing. (sigh)
After looking at Victoria Antonio's youtube of this process I'm convinced the driver install is still not correct.
Somehow it gets mucked up when I use PdaNet. Not sure how or why.
To make this picture clearer I posted some screen shots on my website: http <colon, 2 forward slashes>skippyvondrake.com
I hope someone can tell me how to unmuck what I've mucked.
skippyV said:
Selected "Continue", and entered(<Vol+>).)
Click to expand...
Click to collapse
Don't press Continue on the Nabi after selecting fastboot protocol
After selecting fastboot protocol leave it.
skippyV said:
> fastboot.exe devices
Click to expand...
Click to collapse
The command is:
fastboot devices
not
fastboot.exe devices
Thanks for telling me about when I'm in fastboot mode.
I DO get a device number when in fastboot mode and from 'fastboot devices'
But adb still cannot "see" the device. All commands using adb result in:
error: device not found
Regardless of what mode the Nabi is in.
SOLVED
I finally decided to try this with a different computer. Same OS and architecture.
But this computer didn't have various android development "kits" installed previously.
And it worked without a hitch.
The youtube by Victoria Antonio pointed out a few nuances I didn't know.
And you helped too, BBKGTTDi, so giving you "thank you" points.
Chow!
Glad you got it work SkippyV
I just need to figure out now, when i download a game to the Nabi2 from the playstore, how to get it so show in the kids mode
BBKGTTDi said:
Glad you got it work SkippyV
I just need to figure out now, when i download a game to the Nabi2 from the playstore, how to get it so show in the kids mode
Click to expand...
Click to collapse
When I get there - if I figure it out - I'll send you a private email sense that would be a different "thread'. There are other nuances I've noticed too...
show game in Nabi mode after rooting
@BBKGTTDi, I thought there would be a way to send private messages/emails on this forum - but I don't see it.
I ran into the same problem after rooting the Nabi. The "Add Apps" app doesn't work as its supposed to.
It worked prior to rooting.
It does list the newly installed apps, but selecting them for Nabi-Mode, rebooting, and they aren't there.
Only visible in Mommy/Daddy mode.
So if you figure it out please let me know!
The "Add Apps" app is working correctly now. Don't know what happened before.
I must be getting "Nabi-ed out".
Let me know if you're still having troubles.
skippyV said:
I'm using Windows 7 x64.
Your instructions with selecting "Samsung" for PdaNet install appears
to have done something right. So maybe I'm a little closer.
It completed the PdaNet install successfully and when I reconnect the
Nabi I see a message popup on Windows saying PdaNet connected something.
(It was too quick.)
So maybe I'm not doing the "Fastboot" portion correctly.
On Nabi hold <Power> and <Vol+> down at same time to turn it on.
Resulting Menu:
Boot Normally
Fastboot Protocol
Recovery Kernel
Forced Recovery
Use <Vol-> to move the selected item.
Moved selected item down to "Fastboot Protocol".
Use <Vol+> to "enter" selected item.
New Menu:
Bootloader
Continue
Reboot-bootloader
Reboot
Poweroff
Selected "Continue", and entered(<Vol+>).
At this point the Nabi boots up.
On PC in adminstrator mode for command window and with ALL anti-virus
security turned off:
> adb.exe kill-server
> adb.exe start-server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
> fastboot.exe devices
Nothing. (sigh)
Click to expand...
Click to collapse
I ve got the same problem using windows xp, 7 or 8.1 after OTA update to jellybean.
Any ideas of what is going on?
arvati said:
I ve got the same problem using windows xp, 7 or 8.1 after OTA update to jellybean.
Any ideas of what is going on?
Click to expand...
Click to collapse
I did have those problems last year. Still think they were driver related.
I use mehtuus's package now. He has a useful install script.
http://forum.xda-developers.com/showthread.php?t=2172843
And when I want to use adb in "manual" mode I just launch a command prompt from his
'adb' directory (package is named 'mn2ri-v1.5.0-beta2.zip').
Try playing with his installer. And see if anything is displayed using:
Code:
adb devices
Thanks skippyV. I got it in fastboot last week with ubuntu and installed TWRP sucessfully.
Hi after reading through the post on GitHub on how to simply root your shield I have a few questions that the tutorial doesn't make clear:
1)There are a ton of files at the top and not sure what to do with them...
2) There is a bit where it explains "On your computer, navigate into the directory containing this file and enter the following command:
fastboot boot zImage_dtb ramfs.img.gz"
But it doesn't say that after you open the directory what you do with it?
Do you keep the window open and that's fine?
Do you type in it's location into command prompt before you type in: fastboot boot zImage_dtb ramfs.img.gz?
Just a bit confused as to what all the files are and where I put them and how they have to be utilised etc
Just need clarification for peace of mind
wanted to post the link but forum won't let me yet
Root explanation
Hi here is the main walkthrough from github but as I said there are a few plot holes for people who are new.
If your SHIELD is already unlocked, you can skip this section.
SHIELD ships with an unlockable bootloader. The bootloader is locked by default, which prevents anyone (including yourself) from booting custom OSes and changing system partitions to potentially obtain extra privileges. This is a significant security feature: in the event that your device gets stolen, an attacker will not be able to retrieve your personal data or use your device if your lock screen has a password set.
By unlocking the bootloader, you allow anyone with physical access to your SHIELD to boot custom images and flash system partitions. This opens the way for an attacker to access your personal information or physically damage your device. For this reason, unlocking the bootloader will erase all your personal data like a factory reset does (so a potential thief cannot get it) and will also void your warranty.
If you know you really, really want to take these risks, here is how you unlock SHIELD's bootloader.
Switch your SHIELD off (long press the NVIDIA logo button and select Power off).
Power your SHIELD on while maintaining the back and home buttons pressed (these are the two buttons that lie under the big NVIDIA-logo button, on its left and right). Release them once you see the bootloader screen.
Connect your SHIELD to your computer using a USB cable.
On your computer, enter the following command:
fastboot oem unlock
This will display the unlock menu. Read the disclaimer and think one last time about what you are doing. This is your last chance to stop.
Use the back and home buttons to select your option. If you decide to continue, select Unlock and press the NVIDIA-logo button to validate. Your personal data will be erased and your device marked as warranty-void permanently.
Regardless of your choice, you will be back to the bootloader screen. Using the same buttons, navigate to Poweroff and select this to power your SHIELD off.
Rooting SHIELD
Now your bootloader is unlocked, but you still don't have root access. For this, we need to install SuperSU, and we will do so by booting a custom Linux image that will do this for us.
Power your SHIELD on while maintaining the back and home buttons pressed (these are the two buttons that lie under the big NVIDIA-logo button, on its left and right). Release them once you see the bootloader screen.
Connect your SHIELD to your computer using a USB cable
On your computer, navigate into the directory containing this file and enter the following command:
fastboot boot zImage_dtb ramfs.img.gz
The kernel and ramdisk will be downloaded and started. You will see 4 penguins on your screen, and the message ROOTING SHIELD will appear. Shortly after, your device will reboot. Congratulations, you are rooted!
For some unknown reason USB debugging in Developer options might become unchecked after rooting. You will need to re-check it if you want to use ADB.
It is safe to perform the rooting operation as many times as you want (e.g. after an OTA). Your user data will not be erased by rooting itself, it is the act of unlocking the bootloader that does.
Is there anyone who can add a little to this to make it more simple for a noob like me?
I understand there is a file set that is at the top of the page and I downloaded the files which include zImage_dtb ramfs.img.gz
but don't know how to utilise them etc
There are no videos on youtube of how to do it and if anyone can add just a few more steps so that I know where I'm going with this (don't want to brick my system).
I just want controller support installed like Tincore or gamekeyboard so I can unlock the potential of the games library on GooglePlay.
Thanks for reading.
you copy those two files "zImage_dtb" & "ramfs.img.gz" to the same directory your adb and fastboot executeables are (same directory you issued the oem unlock command from)
then navigate to the same directory you did the oem unlock from via command line then issue the command "fastboot boot zImage_dtb ramfs.img.gz"
it's pretty simple but I can run you through a simple example of what I did
1)download android sdk
2)copy platform tools folder to a directory on c drive (exp c:\tools\ )
3)copy the 2 files above to the same folder along with cwm recovery(optional)
4)boot shield into fastboot mode (home+back+power)
5)navigate to the folder with adb, fastboot, and the above files in it.
Code:
cd c:\tools
6)detect if fastboot driver is installed with "fastboot devices" if result, then continue, if no result, then check if correct driver and check connection
7)issue oem unlock command and follow the onscreen prompts
Code:
fastboot oem unlock
8)restart device, after a full boot cycle(wipes data), power back into fastboot
9)issue the "rooting image" command, device with automatically reboot
Code:
fastboot boot zImage_dtb ramfs.img.gz
*10) optionally reboot back into fastboot and install cwm recovery
Code:
fastboot flash recovery recovery.img
pretty simple
thanks for fast reply.
Ok so I have Two different versions of Android SDK (32 bit and 64 bit) which one do I use?
"copy platform tools to a directory on C drive (exp C:\TOOLS\)"
What are platform tools?
"copy the two files above to the same folder along with cwm recovery"
What two files? do you mean the zImage_dtb and ramfs.img.gz? Do they go into the C:\TOOLS\ folder?
"navigate to the folder with adb, fastboot, and the above files in it"
What do you mean by navigate? Do you simply mean open the folder or do I use a program to do this?
"Detect if fastboot driver is installed with "fastboot devices" if result, then continue, if no result, then check if correct driver and check connection"
What's fastboot devices? What does result and no result mean? What does Check driver and check connection mean? how dod I do that?
I'm confused by all the lingo, what applications I should be using and when exactly do I start using command lines etc
Thanks for help so far been great but I need step by step instructions eg
open folder, copy and paste file1 and file 2 to this folder
open application X
click import file 1 and file 2
type XXXXXX\root\cdrive into command
press enter
see?
I do not know what some of the words mean and how to do some of the stuff the tutorial says. It's jargon and I have all these files, in all these folders with no idea how to do this from start to finish.
Appreciate the help so far but you are dealing with a novice. I know the work won't take long but I need all the relevant info, in one list, with consistent language to ensure I do everything as it should be done.
Bless you sir and...
Good luck
If your confused by my instructions you need to wait for a "one click" installer, sorry.
gogul1 said:
Ok so I have Two different versions of Android SDK (32 bit and 64 bit) which one do I use?
"copy platform tools to a directory on C drive (exp C:\TOOLS\)"
What are platform tools?
"copy the two files above to the same folder along with cwm recovery"
What two files? do you mean the zImage_dtb and ramfs.img.gz? Do they go into the C:\TOOLS\ folder?
"navigate to the folder with adb, fastboot, and the above files in it"
What do you mean by navigate? Do you simply mean open the folder or do I use a program to do this?
"Detect if fastboot driver is installed with "fastboot devices" if result, then continue, if no result, then check if correct driver and check connection"
What's fastboot devices? What does result and no result mean? What does Check driver and check connection mean? how dod I do that?
I'm confused by all the lingo, what applications I should be using and when exactly do I start using command lines etc
Thanks for help so far been great but I need step by step instructions eg
open folder, copy and paste file1 and file 2 to this folder
open application X
click import file 1 and file 2
type XXXXXX\root\cdrive into command
press enter
see?
I do not know what some of the words mean and how to do some of the stuff the tutorial says. It's jargon and I have all these files, in all these folders with no idea how to do this from start to finish.
Appreciate the help so far but you are dealing with a novice. I know the work won't take long but I need all the relevant info, in one list, with consistent language to ensure I do everything as it should be done.
Bless you sir and...
Good luck
Click to expand...
Click to collapse
Step by step instructions like that would take quite a long time to write. Its basically assumed that navigate is a straight forward instruction, namely, open My Computer, click C:\, click something else, etc etc. 32 bit vs 64 bit, again, you should know what your computer is running and use the correct one respectively.
The reason they dont issue novice instructions is for 1 reason only. People who such as yourself claim to not understand the "jargon" are also those who are more likely to make a mistake when rooting. This can lead to a completely bricked device, ie one that will no longer turn on and load up android, totally dead device. As far as the manufacturer is concerned, a bricked device unless bricked by one of their own updates on a non rooted shield installed correctly, is not covered by warranty. This leads said novice to accuse the tutorial writer of having something wrong in the tutorial when in reality they have clicked the wrong thing etc.
Either way, end result: dead device.
Rooting is not aimed at the novice. It is aimed at the advanced user.
Thank you
I understand that and appreciate the explanation. I can work my laptop and I know that my laptop is 32bit or 64bit but it did not say at any point that it was referring to my computer. It just said download the 32 or 64 bit version. Well I have to make sure what they are talking about before I go and try to root my device as I like clarification on everything I do so that I get it right (and don't brick it). At the moment the explanations are all over the place, some info here, another bit there and was hoping somebody could link it all for me and make sense of the order in which I would do things. I have installed graphic cards in my laptop, put custom firmware on to ipods, psp's, computer etc but this is my first foray into android territory and would like to get it right. I am trying to follow a video tutorial but my computer's reaction to driver updates for the ADB/Fastboot drivers is telling me my drivers are up to date and I'm not getting the error message his is. This means I'm not sure where to go as the situation is diffferent s He is trying to get motochopper working for shield so it will root the device and hoped it would do the same for me.
Hopefully some clarification will come sooner rather than later but won't venture fourth until I'm absolutely sure of what needs to be done.
Again, thanks for the help it is appreciated.:laugh:
Sorry for being so abrupt, it wasn't my intension, you are trying to learn. I will not give a step by step which I feel would be the best, yet potentially more dangerous option for you though.
The parts written in the "code" blocks are what you copy and paste into the command line. When I say navigate I mean by changing directory via command line. You can copy files with a graphical file manager as it's quicker but navigate could also mean graphically.
Google search how to tell if you are running 32 or 64 bit windows, there are better guides and videos than I would be able to describe in a few lines. I was assuming you had already unlocked your bootloader as it is required before root, I covered it as point of reference only.
Platform tools is a folder in the SDK, if you install the SDK you will see that folder where you install it.
Fastboot is the utility also in the SDK that you run from command line that's in the code blocks I posted. If you run the command it will either give a result saying a device is detected or it won't show anything (no result) and you have an issue. If you have a driver issue then that's a whole other problem with a specific forum topic for, but I also assumed you unlocked your bootloader which would require you have fastboot and driver issue resolved.
Main cause of my snappiness is it says the requirement (first line of what you quoted) is unlocked bootloader and you are asking questions about rooting (step two after unlocking bootloader) didn't realize you were stuck in step 0, trying to figure out where to start.
gogul1 said:
I understand that and appreciate the explanation. I can work my laptop and I know that my laptop is 32bit or 64bit but it did not say at any point that it was referring to my computer. It just said download the 32 or 64 bit version. Well I have to make sure what they are talking about before I go and try to root my device as I like clarification on everything I do so that I get it right (and don't brick it). At the moment the explanations are all over the place, some info here, another bit there and was hoping somebody could link it all for me and make sense of the order in which I would do things. I have installed graphic cards in my laptop, put custom firmware on to ipods, psp's, computer etc but this is my first foray into android territory and would like to get it right. I am trying to follow a video tutorial but my computer's reaction to driver updates for the ADB/Fastboot drivers is telling me my drivers are up to date and I'm not getting the error message his is. This means I'm not sure where to go as the situation is diffferent s He is trying to get motochopper working for shield so it will root the device and hoped it would do the same for me.
Hopefully some clarification will come sooner rather than later but won't venture fourth until I'm absolutely sure of what needs to be done.
Again, thanks for the help it is appreciated.:laugh:
Click to expand...
Click to collapse
Download 64 bit software for 64 bit windows and 32 bit on 32 bit windows. Only notable exceptions are where a guide explicitly says to get 32 bit for some particular reason (in my case the only time I have come across this is MSI afterburners screen recording facilities only functioning on a 32 bit program for some reason, no 64 bit version) or if you are running 32 bit windows and physically cannot run 64 bit software even though a guide says "use 64 bit java etc etc".
rather interested in installing a graphics card in a laptop seeming as laptops use graphics cards that are soldered down to the motherboard not on a seperate removable card in all with very few (but existant) exceptions.... I think asus, dell and someone else did offer them at one point, its actually what the MXM connector was invented for (but its used for a few other things now instead).
Anyway. Its always good to have clarification. I think the post above me gives a few starting points and as always: google is your friend (so are bing and yahoo, but they are those friends where once you leave your job or school or whatever you probably wont ever see again).
boot achieved
I boot loaded the Shield through dab and boot loader.
Shield restarted once I chose to unlock the shield. I lost all my stuff (as expected) and it restarted. The drivers then reinstalled on my laptop.
I restarted my laptop and the shield again and tried to reinstall the drivers that were made for the ADB but sadly I get this message now...
"Windows has determined that your driver software is up to date MTP USB DEVICE"
So I restarted everything and the device is now showing up in the Andriod Device driver list.
I am using minimal adb and Fastboot application. It opens the command menu
I type in
adb reboot bootloader and I get the reply "error:device not found"
any ideas?
Sigh!
gogul1 said:
I boot loaded the Shield through dab and boot loader.
Shield restarted once I chose to unlock the shield. I lost all my stuff (as expected) and it restarted. The drivers then reinstalled on my laptop.
I restarted my laptop and the shield again and tried to reinstall the drivers that were made for the ADB but sadly I get this message now...
"Windows has determined that your driver software is up to date MTP USB DEVICE"
So the shield is now showing up in my computer manager under Portable Devices and not under the Android Devices like it did when I installed the custom drivers the first time.
Will this be an issue when I come to root?
Sigh!
Click to expand...
Click to collapse
the MTP driver is for plugging the shield in and viewing the file system. If the device isn't under android devices in device manager then you may need to reinstall the ADB drivers or just double check that the ADB can see the device (it may).
Open a command prompt. type "cd [path to the android sdk]\platform-tools"
Then type "adb devices".
It should list all the android devices it can make a debug connection to. If the Shield is in that list your good, otherwise don't proceed any further until you can rectify that.
The other solution is that you dont need ADB drivers on a linux system for some reason. Don't ask why. I havent a clue. But that would necessitate installing linux.
And something that is useful for finding the adb on the command line again in future for windows. You don't want to "cd" into the correct folder every time (the command line equivalent of opening folders). Sometimes you just want to be able to open the command prompt, type "adb devices" and it to just work. That's doable by altering your system PATH variable.
Open my computer. Right click > Properties, should open the System window.
Left side there should be a button saying "Advanced system settings".
It will open the "System Properties" window to the "Advanced" tab (if it isnt on that tab just switch).
Bottom of the window should be a button saying "Environment Variables...". Click it.
Now the window that appears will be split in 2. User variables and System variables. There is a PATH entry in both, it is best that you only change 1. If you are the only user or you only want your user to be able to access the adb, you can change the User variable. Otherwise you can change the system variable for the adb to work on all users. For me I had to add python to my path once but I wanted to do this for all users so I changed the system one, the PSP SDK I installed however altered the User variable by default. Make your choice and find the variable "PATH" in either one.
Click Edit. A window will appear with Variable name and Variable Value. At this point what I recommend doing is copying the entire contents of value into a notepad file and saving them as a backup. Then cancel and go back into it.
Code:
C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Lua\5.1;C:\Program Files (x86)\Lua\5.1\clibs;C:\Python27;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\
That is my Path variable.If you look the path variable is mostly a series of filepaths (or other variables too) which are seperated with ";". When you type a command such as "adb" into a command prompt what windows does is searches the current command prompt directory for a file it can execute which is called "adb" (it ignores extensions unless explicitly given one), if it doesnt find it in the current directory it searches each folder in the system path variable for the same executable (it ignores sub directories, it will only search the folders above on my system). So if we want to be able to type adb from any folder, we need the folder the adb is in to be added to the system path variable.
Simply add this to the end of it
Code:
;[whatever the path to the adb folder on your system is]
It will be whatever you had to add after "cd" to get to the adb earlier (must not leave out the C:\Users etc etc if its stored in your documents, cd will let you get away with ignoring that, the variable requires the FULL filepath).
Save the variable. Open a command prompt. Type adb, should work. If not, QUICKLY RESTORE THE BACKUP BEFORE WORKING OUT WHAT WENT WRONG. Should be safe with the broken variable to be fair, but you don't want to risk anything. If you dont think your going to use the adb often then simply dont bother updating the path variable rather than taking the (minimal) risk.
Wow my path variable is beginning to get a bit long now I only manually added python and lua to it. The rest will be the default entries and the SQL server stuff appears to be from installing visual studio. Yours probably wont match.
hehe you're going to hit me in a minute...
message deleted as I was being a moron....
ok I should be entirely clear as you guys are trying to help
ok I should be entirely clear as you guys are trying to help me so it's best i let you know what I have done up until this point.
Ok so I boot loader my shield.
I downloaded minimal ADB and Fastboot. I also downloaded the drivers you recommended in the forum.
I installed the drivers:
My shield showed up in the computer Manage list as a Portable device.
I chose to install the new drivers, it asked if I still wanted to go ahead as the drivers could not be verified and I said yes.
The drivers installed and the Shield changed from being in the portable list to showing up as an Android device.
Success I believe.
I then opened ADB BOOTLOADER and booted my Shield Manually.
I then typed in the relevant prompts in the command and a list of options showed up on the shield.
It showed my device number in the command prompt which was the one on my shield screen.
I then command the unlock function and the shield offered me the option to lock or unlock.
I chose Unlock and it then rebooted.
When it restarted, my computer reinstalled the device drivers and my shield had reset to factory settings (as it should).
I then looked in the Computer Manage list and my Shield had reverted back to being in the Portable Devices list.
I restarted both again and the Shield then showed up under Android Devices like it did when I installed the custom drivers the first time.
But the name of the device is Nvidia Shield - not Nvidia Shield ADB like in the tutorial video... not sure it that helps.
I enabled USB Debugging,
put the Superuser.apk and Su bin file into the minimal AADB and Bootloader folder.
I then put the Thor-insecure-boot.img in the Minimal ADB and Bootloader folder too.
I started up the command prompt from the minimal ADB and Bootloader.
I then saw this
C:\Program files <X86>\Minimal ADB and Fastboot>
I then typed in adb reboot boot loader and pressed enter
I got
error: device not found
So I decided to take the above advice and opened a command prompt
I typed in cd C:\tools\adt-bundle-windows-x86_64-20130729\sdk\platform-tools
and pressed enter:
It repeated what I typed and I then put in adb devices.
It then came back with:
List of Devices attached
but nothing was listed....
doh!
Progress!
Ok so I uninstalled my drivers to start again, plugged in the shield and it reinstalled my drivers and now under Android Devices it shows NVIDIA SHIELD ADB
Result!
Now I opened the dab cmd prompt
typed in
adb reboot fastboot
and it booted my shield! jolly good
But then I typed in
fastboot boot thor-insecure-boot.img
I then had
<waiting for device>
show up in the command window.
This is where it stayed.
On the screen of my shield I have options:
continue
restart bootloader
recovery mode
poweroff
Do I have to choose one of these in order for it to begin the thor img command?
C:\tools\adt-bundle-windows-x86_64-20130729\sdk\platform-tools Just incase you didnt get it earlier. That would be the path required for the variable change above. Just whack a ; on the end of the existing variable and throw that new path on the end and done.
But yes, adb devices not listing shield is not a good thing. Try reinstalling the ADB driver for the shield manually (you cant do it via device manager etc).
cool
I'm past that and now <waiting for device> problem to rectify. Am looking online now but there isn't much on there so far...
looking under device manager it shows up under Android Device as Nvidia Shield ADB but it also shows up under portable devices as SHIELD.
Whilst in boot mode the device only shows up in portable devices with a exclamation mark next to the device.
*UPDATE*
I uninstalled the portable device driver because I think it may have been causing confusion.
I then typed adb devices into CMD and a list of devices showed the serial number of the nvidia Shield.
I then typed in adb reboot bootloader in and it booted.
I then tried adb devices again and nothing showed up.
When I go into bootloader The Android Device: Nvidia Shield ADB driver disappears in manager once I go into bootloader mode. Is this normal?
Hmmmmmmm
definetly something to do with the drivers.
I'm on windows 7 64bit by the way.
Going back into device manager I noticed that there is another device under Other devices, upon looking at it it is Fastboot and has an exclamation mark in a yellow triangle next to it (Minimal dab and fast boot is open though).
Such a bummer as I'm so close yet so far
picture
ok so here is a pic of my devices list fastboot is there
before boot
This is the devices it can see before I put the shield in boot mode
devices seen after shielf in boot mode
the are the devices seen after I put the Shield in boot mode. It can't see any devices
waiting for devices
This is the screen on the shield in boot mode. The CMD screen says "Waiting for Devices"
I installed the custom ADB drivers from this site, I then booted my Shield and am stuck on the command prompt screen as it says
<waiting for devices> when I try to install the thor.img
The Shield is unlocked and the usb debugging option is on.
Cannot work out what the issue is.
looking under device manager it shows up under Android Device as Nvidia Shield ADB but it also shows up under portable devices as SHIELD.
Whilst in boot mode the device only shows up in portable devices with a exclamation mark next to the device.
*UPDATE*
Ok so I uninstalled my drivers to start again, plugged in the shield and it reinstalled my drivers and now under Android Devices it shows NVIDIA SHIELD ADB
Result!
Now I opened the dab cmd prompt
typed in
adb reboot fastboot
and it booted my shield! jolly good
But then I typed in
fastboot boot thor-insecure-boot.img
I then had
<waiting for device>
show up in the command window.
This is where it stayed.
On the screen of my shield I have options:
continue
restart bootloader
recovery mode
poweroff
I uninstalled the portable device driver because I think it may have been causing confusion.
I then typed adb devices into CMD and a list of devices showed the serial number of the nvidia Shield.
I then typed in adb reboot bootloader in and it booted.
I then tried adb devices again and nothing showed up.
When I go into bootloader The Android Device: Nvidia Shield ADB driver disappears in manager once I go into bootloader mode. Is this normal?
Hmmmmmmm
definetly something to do with the drivers.
I'm on windows 7 64bit by the way.
Going back into device manager I noticed that there is another device under Other devices, upon looking at it it is Fastboot and has an exclamation mark in a yellow triangle next to it (Minimal dab and fast boot is open though).
Such a bummer as I'm so close yet so far
pictures
These are the pictures of the command promt when it is in boot mode, unboot mode and the devices installed.
When I go into boot mode on the shield the device called Nvidia Shield ADB dissappears from the computer manager window and the fastboot device has a yellow triangle with an exclamation mark next to it.
Very odd.
Yellow triangle means driver or device error (either one). The rest you have reached the limits of my knowledge.
appreciate the help
appreciate the help from everyone so far. I got through the bootloader stuff easily enough and now the shield is unlocked. This next bit is just knocked me for six as I have followed the instructions step by step and even taught myself some new stuff but this is not going according to plan.
So far:
I downloaded Andriod SDK
Ran SDK
clicked install and it installed lots of stuff including Android SDK tools, SDK platform tools and SDK Platform & ARM EABIv7a a system image in the Android 4.3 section.
I downloaded minimal adb and fastboot v1.1.3
I downloaded Superuser
I downloaded thor-insecure-boot.img
I downloaded the Universal_Naked_Driver_0.73 package
I then installed the Universal Naked Driver package which shows up on computer manager Devices under Android Devices as NVIDIA SHIELD ADB
I then dragged the thor and superuser files into the minimal adb and fastboot folder
I then plugged in my Shiled via USB 2.0
I started up the adb and fastboot CMD window
I first typed in adb devices and the shield showed up.
I then Typed in adb reboot bootloader
The shield went into boot mode.
I then retyped adb devices into the CMD window
The shield did not show up.
I the typed in fastboot boot thor-insecure-boot.img
The CMD window then said <waiting for Devices>
The shield screen showed that the device is unlocked and gave me 5 options:
Continue
Restart Bootloader
Recovery Mode
Reboot
Poweroff.
And then nothing.
This is the point I am at in terms of rooting.
The Device shows up in the Computer/manage window when plugged in but when I execute the adb reboot bootloader command it dissapears.
There is a Device in the Other Devices section of the Computer/manage window called Fastboot. This has a yellow triangle with an exclamation mark in it.
The CMD window can communicate with the Shield as it can make it go into boot mode but that's it.
Appreciate any help that can be given. Apologies for the length of post but it's only fair you know what I have done so far. Knowledge is power etc
I'm on windows 7 64bit os.
Latest pictures of the system
Ok so these are the latest picture of the system as it is now.
Currently there are two drivers showing for the Shield. One under Android Devices as Nvidia Shield ADB
The other is under Portable Devices as SHIELD. (picture 4 from the left)
When in boot mode the Android Device dissappears (picture 2 from the left)
There is a picture of the minimal adb and fastboot folder where I put the Superuser.apk file, the Su file and the Thor file - picture 3 (Is that all correct?)
There is also a picture of the command window when the shield is in boot mode. I type in adb devices and nothing shows up (picture 1)
Android SDK pics
And here is the SDK app running...
When your shield is waiting for fastboot commands it should show up as fastboot in device manager.
I had a terrible time with drivers too. My advice is to uninstall as many shield drivers as you can and then try to manually update the drivers making sure to get the fastboot driver installed. When you select have disk for the drivers the correct one will say Shield Fastboot
time to go fishing!
Ok I will try to uninstall drivers but not sure how to do it due to not exactly knowing which ones there are and where they are kept. Will take a look around. Thanks for the help though will try and find the fastboot drivers
gogul1 said:
Ok I will try to uninstall drivers but not sure how to do it due to not exactly knowing which ones there are and where they are kept. Will take a look around. Thanks for the help though will try and find the fastboot drivers
Click to expand...
Click to collapse
When I did it I plugged in my Shield and went into the device manager and uninstalled everything Shield related. I think it showed up in two places. Then I unplugged the Shield and when I plugged it back in I went back to the device manager and found the Shield again since Windows will auto install some sort of driver when you plug the shield in. I think this is when either there will be a yellow exclamation point next to one of them or windows will actually allow you to update the driver without giving you the stupid "driver is up to date" message.
That's when I right clicked on it and selected to update driver. At that point I made sure to use the "Have Disk" option and browsed to the universal driver folder. Once the universal driver list populated I was able to find the Shield fastboot driver in that list. I think my original problems started when I installed the Shield ADB driver which isn't needed and once that driver is installed the fastboot driver seems impossible to install because stupid windows keeps telling you the driver is up to date. By booting your Shield up using the home and back keys you are manually placing it in fastboot mode so you never need to use adb commands.
It is hard to remember but I do remember uninstalling everything I could and when I did finally update a driver I used the one with the word fastboot in it.
---------- Post added at 12:27 PM ---------- Previous post was at 12:21 PM ----------
gogul1 said:
These are the pictures of the command promt when it is in boot mode, unboot mode and the devices installed.
When I go into boot mode on the shield the device called Nvidia Shield ADB dissappears from the computer manager window and the fastboot device has a yellow triangle with an exclamation mark next to it.
Very odd.
Click to expand...
Click to collapse
If you get to this point again select to update that driver for the exclamation point and go to have disk and find the fastboot driver which you somehow get to by using the "have disk" option and browsing the universal drivers folder when you update the driver. Don't install the other drivers in the list, just the fastboot driver.
don't get the have disk option
uninstalled everything again. Next will be finding the Have disk option.
ah ha
I kinda see, when I go into Update driver Do I go into "let me pick from a list of device drivers?"
I click on that option and it gives me a list of devices but not sure what to choose. There was an android device option so chose that. I then went into the folder and clicked the "Have disk" option. I then navigated to the universal folder but there was nothing like bootloader or boot device in the folder.
I go into computer, right click, choose manage.
Go down to devices.
See OTHER DEVICES
In that folder is the SHIELD device with the yellow triangle next to it.
Right click it, choose update driver.
I choose let me pick from a list of device drivers on my computer.
It opens the window - select your device type from the list below
I choose show all devices
It opens the window - select the device driver you want to install for this hardware
I click the HAVE DISK button
I chose Install from disk option
I clicked the browse button
I navigated to the Universal naked driver folder and clicked open.
List of items in the folder are:
amd64 - folder
i368 - folder
android_apxusb.inf
android_winusb.inf
and that's it. So I chose android_apxusb.inf
right clicked on it to install.
window asking if I wanted to cancel or install anyway popped up.
chose install anyway.
Driver installed but still the same as before.
sigh
hmmmm
ok so this time I installed the ADB driver.
I then deleted the Portable Devices Driver named SHIELD.
I then booted my shield up again.
This time the Android Device Nividia Shield ADB turned into Fastboot and had the yellow triangle on it.
I then clicked on that chose to update drivers.
I then chose the Have Disk option. Chose the android_apxusb.inf file and clicked ok. There was the a long list of devices including asus eepad etc and I scrolled down to Nvidia Shield Fastboot.
I highlighted it clicked ok, it warned me that it didn't know if the driver was reliable, I clicked ok to install it anyway and the driver then went back up into the Android Devices folder in the device manager and was named Nvidia Shield fast boot.
So I opened up minimal adb & fastboot, then typed in adb reboot boot loader. The Shield booted, I then typed in adb devices but nothing showed up.
I then tried to do command the thor.img anyway, it say:
downloading boot.img
OKAY (0.810s)
booting...
OKAY (0.020s)
finished. total time 0.830s
The shield the rebooted and came back on as normal.
I then cut a paste the command lines:
adb shell
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP /system
exit
but when it came to the mount command it said:
mount: operation not permitted.
hmmmm something is not right but cannot put my finger on it....:roll eyes:
When I went back into the Device Manager I saw that under Android Devices there are now two drivers
Nvidia Shield ADB
Nvidia Shield Fastboot
Not easy this stuff eh?
20 times
I have uninstalled and reinstalled the drivers 20 times now. Always the same result.
I am going to start this all over again.
Don't think I will get any luck.
I uninstalled drivers, plugged in the shield, the updated the drivers via the have disk method. The booted shield.
Then changed fastboot driver to updated driver again.
The results of the whole thing can be seen here
Please help
Right I uninstalled all drivers again.
When I restart and plug the shield back in it automatically installs two drivers.
One is in the Other devices folder named SHIELD and has a yellow exclamation mark next to it.
The other is in Portable Devices and looks to install ok.
What am I meant to do with these?
I try to update the Portable device driver but it doesn't allow me to update it.
I update the other one as nvidia shield fastboot but the when I actually boot the Shiled up it moves from the Android devices folder to the other devices folder and calls itself Fastboot (it has a yellow triangle next to it.
So I then update that one to Nvidia shield fastboot and everything goes ok installng the thor.img.
The the shield roboots and reinstalls the same driver... Now I have two Nvidia Shield Fastboot drivers in my Android folder.
Really Really could do with some help people please please please
Ok, if you have the fastboot driver installed which you should if device manager says fastboot without any yellow exclamation. Windows device manager needs to say fastboot while your shield is connected in fastboot mode (hold home and back while powering the shield up) Download these two files that I link below (or go directly to Gnurou's site and get them if you feel more comfortable https://github.com/linux-shield/shield-root) and put them in the same directory that your fastboot android package is in.. They are the two files needed from gnurou's site for rooting. One is a text file and one is some sort of .gz file (don't unzip this .gz file.
http://db.tt/oPHjgctM
http://db.tt/S0p9KMPi
If your shield is not yet unlocked do this:
1. Switch your SHIELD off (long press the NVIDIA logo button and select Power off).
2. Power your SHIELD on while maintaining the back and home buttons pressed (these are the two buttons that lie under the big NVIDIA-logo button, on its left and right). Release them once you see the bootloader screen.
3. Connect your SHIELD to your computer using a USB cable.
4. open a command window from your fastboot folder and type this (I am assuming you have the android fastboot all set up properly):
fastboot devices
4a. That should list a big long number. If it does that means your fastboot is working.
5. On your computer, enter the following command:
fastboot oem unlock
6. This will display the unlock menu. Read the disclaimer and think one last time about what you are doing. This is your last chance to stop.
7. Use the back and home buttons to select your option. If you decide to continue, select Unlock and press the NVIDIA-logo button to validate. Your personal data will be erased and your device marked as warranty-void permanently.
Regardless of your choice, you will be back to the bootloader screen. Using the same buttons, navigate to Poweroff and select this to power your SHIELD off.
Rooting (Shield should be unlocked at this point)
1. turn your shield off.
2. turn your shield on while holding the home and back buttons until you are in the bootloader.
3. plug the shield into the computer
4. open a command window from your fastboot folder and type this (I am assuming you have the android fastboot all set up properly):
fastboot devices
4a. That should list a big long number. If it does that means your fastboot is working.
Now type this:
fastboot boot zImage_dtb ramfs.img.gz
You should see the shield do it's thing with the penguins and then you're rooted.
This is how I rooted mine. It's way easier than doing that manual method. I copied some of the instructions directly from Gnurou's git site but the formatting is a little different. It all boils down to getting those drivers installed properly and you will know those damn things are installed properly when you have your Shield plugged into your computer while in fastboot mode (you held home and back before turning the shield on) and you can type fastboot devices and it lists a long number. I think people are shying away from this method because github can be confusing as far as how to download files and people seem to be confused about what all the other files are for on Gnurou's site when really you only need the two I linked.
Keep at it man. I know you'll get it.
Thanks
I was given a package of developer tegra nvidia drivers adk drivers to install.
Now I can boot my shield
When I type in fastboot devices my shield shows up as a long number
but when I type in fastboot boot zimage_dtb-ramfs.img.gz
I replies
cannot load zImage_dtb': No error
I put the files in the Minimal ADB and Fastboot folder.
Odd.
The drivers I have installed now are in this picture it works up until the point I need to execute the root
View attachment 2209196
This was my original issue in video form so you can see my problem.
http://youtu.be/amk7fkKJtSc
I was going to try and help here but after seeing how many different threads gogul1 has spread his issues though, I don't fell like spending 2 days trying to figure out what order his posts are in from thread to thread.