Honor H60-L04 stuck at honor logo - Honor 6, 6 Plus Q&A, Help & Troubleshooting

Hi Guys,
Im need and assist on how to fix my Huawei Honor 6. Here is the scenario that happened to me. I manage to unlock the bootloader and root it using multitools. But i dunno my root success or not. Because after multitools done with rooting my phone reboot and stuck at honor logo.
What i have done :
-I have cleared the cache and dalvik cache using TWRP which is custom recovery. But i cannot Unbrick my honor 6 (H60-L04).
-I also flash the boot.img, recovery.img, cust.img and system.img. After flash these 4 item also cannot proceed to flash the update.zip because i cannot enter the huawei recovery I can enter the custom recovery only.
May i know can i flash any custom or official rom using custom recovery like we flash samsung phones.
Thanks All.

i'm in the same situation with Honor 6 Plus pe-ul00. it wont boot anyway! i can install TWRP recovery but can't install any custom rom =(
i can't figure out what i'm doing wrong.

Solution to Honor 6 Stuck At Honor Logo
Hi Honorzzz,
I m new here so i dont know the forum rules, but i have faced the same situation so i m giving a solution to you.
1. If you have taken Backup of your ROM then you can restore it via TWRP.
2. If NOT, Then Google for H60-L04C675B810 stoc full, download this and restore this via TWRP. It worked for me. It will Restore your system to B810.
3. Then you can flash stock recovery and update to B820 => B831.
Please let me know if this helped you.

Split74 said:
i'm in the same situation with Honor 6 Plus pe-ul00. it wont boot anyway! i can install TWRP recovery but can't install any custom rom =(
i can't figure out what i'm doing wrong.
Click to expand...
Click to collapse
may be you can get a solution if yoy can provide a bit more info of your problem..

thilak devraj said:
may be you can get a solution if yoy can provide a bit more info of your problem..
Click to expand...
Click to collapse
Hi!
problem solved with DC-Phoenix tool, only way to restore was an install from backdoor command.

Split74 said:
Hi!
problem solved with DC-Phoenix tool, only way to restore was an install from backdoor command.
Click to expand...
Click to collapse
glad to here that..

Split74 said:
Hi!
problem solved with DC-Phoenix tool, only way to restore was an install from backdoor command.
Click to expand...
Click to collapse
Please share your experience in detail so that in can be helpful in future...

you can find the DC-Phoenix Toll review here:
http://forum.xda-developers.com/honor-6/help/tested-method-to-repair-bricked-honor-6-t3494860
and my story here:
http://forum.xda-developers.com/honor-6/help/honor-6-plus-pe-ul00-brick-t3470439

if u want to go back stock us fastboot ADB way . GD luck .

Related

Developers options missing

Hello y'all, i issued a problem tomorrow by rooting BLN-L21C432, i unlocked bootloader with no problem, when was time for flashing recovery, i flashed the boot into the recovery and issued a problem in the dev options and security. Cuz of that, i can't access to adb, hisuite hdb to backup, and can't install extern apps without autorizations.
I tried all night long to resolve but no way, add to that the fact i've got a very very low connexion so 3-4h to load an update.zip.
So i downloaded b370, no way i can't use the dload method, fail at 5%. Same issue with b369. Tried to flash manually system boot and recovery by extracting update.app, no result, it's same. Tried to Unbrick via multi-tool, i use it on honor 7, but there's no cust image in update.app.
Build number is normal, C432B365.
I don't know what to do now, it's 10 hours i'm losing my minds with that phone. Please heeeelp :crying:
From which firmware ? Is it good if i flash boot and recovery from B360 ?
Edit : Actually the phone is in B365, it would be better if i try to dload from it right ?
I read that unlocked bootloader could block an update, is that true ?
Rommco05 said:
No u need to flash boot and recovery from actually firmware. After when u flash right boot and recovery (from B365). Now u try installing this firmware us it B360. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v82485/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L21_hw_eu/update_data_full_BLN-L21_hw_eu.zip
You can use dload method or over Firmware Finder
Click to expand...
Click to collapse
I'm gonna download it and come back later, thank you very much
Hi guys I came over the problem by only flashing the original boot that was B365, it was si obvious, thanks to you for helping me bro, real thank ?

Boot animation problem

Hi
since i flash my update rom android 7.0
i have two Boot Animation
first is for honor
second is huawei
how remove second one?
plz help me
Try to clean flash your firmware through dload method, trying to be accurate while flashing. Something surely went bad while flashing the update you're talking about. Maybe you flashed the 7.0 for another variant, and now it messed up the firmware. Go on hwmt.ru site -> firmware database, and recover your ROM update package.
You have to pay attention and flash ONLY packages that matches your build number first 9 characters. Like "BLN-L21C432Bxxx", for example, will work only on a BLN-L21C432Bxxx. Flash only packages with PV at the end of the name.
RedSkull23 said:
Try to clean flash your firmware through dload method, trying to be accurate while flashing. Something surely went bad while flashing the update you're talking about. Maybe you flashed the 7.0 for another variant, and now it messed up the firmware. Go on hwmt.ru site -> firmware database, and recover your ROM update package.
You have to pay attention and flash ONLY packages that matches your build number first 9 characters. Like "BLN-L21C432Bxxx", for example, will work only on a BLN-L21C432Bxxx. Flash only packages with PV at the end of the name.
Click to expand...
Click to collapse
tanks but is there any way to fix it without flashing rom
because i already opened my bootloader and installed twrp
now i cant relock it
because when i relock it rom dosent load
& i have to relock it again & restore from twrp
(does d load metod need locked bootloader?or i can do it with twrp)
hamijan said:
tanks but is there any way to fix it without flashing rom
because i already opened my bootloader and installed twrp
now i cant relock it
because when i relock it rom dosent load
& i have to relock it again & restore from twrp
(does d load metod need locked bootloader?or i can do it with twrp)
Click to expand...
Click to collapse
my bootloader unlocked and load metod worked for me
aixabdennour said:
my bootloader unlocked and load metod worked for me
Click to expand...
Click to collapse
Tanks dude
The problem was twrp
I flashed stock recovery & problem solved!!?
hamijan said:
Tanks dude
The problem was twrp
I flashed stock recovery & problem solved!!
Click to expand...
Click to collapse
now i flashed stock rom with dload method
and i cant flash twrp recovery
i flash it and it says finished
bit when i hold volume up & power stock recovery start!
what should i do?
is there other way to root than twrp?
(bln-l21c185b361)
hamijan said:
now i flashed stock rom with dload method
and i cant flash twrp recovery
i flash it and it says finished
bit when i hold volume up & power stock recovery start!
what should i do?
is there other way to root than twrp?
(bln-l21c185b361)
Click to expand...
Click to collapse
Refer rooting guide for 6X and emui 5 in my signature. Dont use other files
shashank1320 said:
Refer rooting guide for 6X and emui 5 in my signature. Dont use other files
Click to expand...
Click to collapse
Tanks man??
Problem solved
hamijan said:
Tanks man??
Problem solved
Click to expand...
Click to collapse
Glad to know. Enjoy rooted phone :silly:

[help] Bootloop after Oreo flash

hello guys, today stupidly I wanted to install oreo on my honor 8 European (starting from the firmware l09-c432b403) through the Redlotus method (great guide helped me to do a clean flash of the system) now I'm with a brick with bootloader automatically locked after the installation of oreo and I do not know how to reshuffle it since it does not light up ... can you make a miracle? :crying: :crying:
Markxdx said:
hello guys, today stupidly I wanted to install oreo on my honor 8 European (starting from the firmware l09-c432b403) through the Redlotus method (great guide helped me to do a clean flash of the system) now I'm with a brick with bootloader automatically locked after the installation of oreo and I do not know how to reshuffle it since it does not light up ... can you make a miracle? :crying: :crying:
Click to expand...
Click to collapse
Can you boot into recovery? If yes then a factory reset should solve the problem in such cases
In recovery factory wipe get error at 10% ...
Markxdx said:
In recovery factory wipe get error at 10% ...
Click to expand...
Click to collapse
Try using fastboot to wipe data
boris dmello said:
Try using fastboot to wipe data
Click to expand...
Click to collapse
I tried also through fastboot but tells me that it is not allowed to do the wipe, it will be because the bootloader is blocked.ora I do not think it is a hard brick because it goes into recovery ... now the only methods are or try to unlock the bootloader (but I can not find the product id because it does not turn on) or to find some firmware that does not make me fail the update via dload ... but they all fail ...
Markxdx said:
I tried also through fastboot but tells me that it is not allowed to do the wipe, it will be because the bootloader is blocked.ora I do not think it is a hard brick because it goes into recovery ... now the only methods are or try to unlock the bootloader (but I can not find the product id because it does not turn on) or to find some firmware that does not make me fail the update via dload ... but they all fail ...
Click to expand...
Click to collapse
Did you try the rollback firmware in dload?
You can try getting the unlock code using the IMEI and serial number on the box, unfortunately no product ID is on the box try some product id generator or using dc unlocker... It's the only known way to get the unlock code in such situation.
boris dmello said:
Did you try the rollback firmware in dload?
You can try getting the unlock code using the IMEI and serial number on the box, unfortunately no product ID is on the box try some product id generator or using dc unlocker... It's the only known way to get the unlock code in such situation.
Click to expand...
Click to collapse
what would be the firmware rollback? if you mean android 6.0 I tried to install it but it fails. yesterday I also sent the request of the bootloader code obtaining the product id through the generator. now I do not know if they will send us to send it to me, if they send it to me ... thanks anyway for your help
Markxdx said:
what would be the firmware rollback? if you mean android 6.0 I tried to install it but it fails. yesterday I also sent the request of the bootloader code obtaining the product id through the generator. now I do not know if they will send us to send it to me, if they send it to me ... thanks anyway for your help
Click to expand...
Click to collapse
No I meant the android 7.0 rollback version available in firmware finder
This one....
boris dmello said:
This one....
Click to expand...
Click to collapse
Now I try... :fingers-crossed:
boris dmello said:
No I meant the android 7.0 rollback version available in firmware finder
Click to expand...
Click to collapse
hey!
I downloaded the rollback version, extracted the update.APP placed in the Dload folder but when I restart in recovery it stops the installation at 5% ..
Markxdx said:
hey!
I downloaded the rollback version, extracted the update.APP placed in the Dload folder but when I restart in recovery it stops the installation at 5% ..
Click to expand...
Click to collapse
You should wait for the unlock code then, no other option try factory reset one last time maybe, good luck
boris dmello said:
You should wait for the unlock code then, no other option try factory reset one last time maybe, good luck
Click to expand...
Click to collapse
feel, as far as the unlock code is concerned, since I have made the request Saturday, Saturday and Sunday do not count? the code sends it automatically or there will be someone who reads the e-mails ... just out of curiosity
Markxdx said:
feel, as far as the unlock code is concerned, since I have made the request Saturday, Saturday and Sunday do not count? the code sends it automatically or there will be someone who reads the e-mails ... just out of curiosity
Click to expand...
Click to collapse
I think it's a manual process as its submitted in Google forms, even I have requested a unlock code on Saturday, I can't remember where I stored the original one or weather if I ever saved it at all. But luckily my device update was successful... B404 only had to factory reset and the bootloader was locked.
Will let you know as soon as I receive it, and you let me know too when you receive it :fingers-crossed:
boris dmello said:
I think it's a manual process as its submitted in Google forms, even I have requested a unlock code on Saturday, I can't remember where I stored the original one or weather if I ever saved it at all. But luckily my device update was successful... B404 only had to factory reset and the bootloader was locked.
Will let you know as soon as I receive it, and you let me know too when you receive it :fingers-crossed:
Click to expand...
Click to collapse
yep :good:
Markxdx said:
yep :good:
Click to expand...
Click to collapse
Have you got the code?
boris dmello said:
Have you got the code?
Click to expand...
Click to collapse
yet no .. have you received it?
Markxdx said:
yet no .. have you received it?
Click to expand...
Click to collapse
No not yet
Markxdx said:
hello guys, today stupidly I wanted to install oreo on my honor 8 European (starting from the firmware l09-c432b403) through the Redlotus method (great guide helped me to do a clean flash of the system) now I'm with a brick with bootloader automatically locked after the installation of oreo and I do not know how to reshuffle it since it does not light up ... can you make a miracle? :crying: :crying:
Click to expand...
Click to collapse
You should always backup your bootloader unlock key instead of requesting it everytime. Anyways, once you do get your unlock key, unlock the bootloader and do the following steps to restore your device:
Grab Honor View 10 TWRP from here: https://dl.twrp.me/berkeley/ and flash it using the command below:
Code:
fastboot flash recovery_ramdisk twrp.img
Replace twrp.img with the name of the recovery.
You now need EMUI 5 firmware. Go to firmware finder and download the firmware which is FullOTA-MF-PV (must have PV in the end). Copy the firmware to your SD-card. For you it should be B394: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1774/g1755/v101649/f1/full/update.zip
Now reboot your device to TWRP. It might take some time to boot to TWRP so do wait.
Once rebooted, install the update.zip file.
Reboot to system from TWRP. Your device will automatically perform a second stage install and a complete data reset.
Hooray, you're back to EMUI 5.
Now again unlock bootloader and flash EMUI 5 TWRP. Now install this zip: http://update.hicloud.com:8180/TDS/...-L09_hw_eu/update_data_full_FRD-L09_hw_eu.zip
Perform a final factory reset via erecovery and you're done.
hackslash said:
You should always backup your bootloader unlock key instead of requesting it everytime. Anyways, once you do get your unlock key, unlock the bootloader and do the following steps to restore your device:
Grab Honor View 10 TWRP from here: https://dl.twrp.me/berkeley/ and flash it using the command below:
Code:
fastboot flash recovery_ramdisk twrp.img
Replace twrp.img with the name of the recovery.
You now need EMUI 5 firmware. Go to firmware finder and download the firmware which is FullOTA-MF-PV (must have PV in the end). Copy the firmware to your SD-card. For you it should be B394: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1774/g1755/v101649/f1/full/update.zip
Now reboot your device to TWRP. It might take some time to boot to TWRP so do wait.
Once rebooted, install the update.zip file.
Reboot to system from TWRP. Your device will automatically perform a second stage install and a complete data reset.
Hooray, you're back to EMUI 5.
Now again unlock bootloader and flash EMUI 5 TWRP. Now install this zip: http://update.hicloud.com:8180/TDS/...-L09_hw_eu/update_data_full_FRD-L09_hw_eu.zip
Perform a final factory reset via erecovery and you're done.
Click to expand...
Click to collapse
hello and thanks for your help, a question, before installing the update.zip I have to do the wipe data restart in recovery and do another wipe as in custom rom?

[ROM][UNOFFICIAL] Resurrection Remix 5.8.5 for Cubot Cheetah + TWRP

Hello everyone, I was able to successfully port a RR Rom for this device.
Installation:
- Get SP Flash Tools (I used version 5.1512.0, like before)
- Download the RR ROM - https://mega.nz/#!swcRzAgB!fI4CbeHIfx_CdyPrmMNcGN4uQFy4YhaJohufU_DGxGI
- Download TWRP (scatter file included) - https://mega.nz/#!1xUjRIiA!0aFkvFOe0QP_f5SlMcBAPo0nCWNJbW0iagW0OlDaLlU
- Open the "RR 5.8.5 - 7.1.2" zip file, and put "boot.img" and "magisk_patched.img" into your phone's INTERNAL storage so you can find them later
- Flash the recovery through SP Flash Tools to "BOOT" partition! (If you flash it to "recovery" partition, the screen may not work)
- Reboot, it should boot into TWRP
- Wipe system, cache, data, dalvik cache
- Flash the ROM (you don't need to flash Gapps, they are pre-installed)
- After it's done, go back and click "Install", then "Install image".
- Flash either "boot.img" if you want no root access, or "magisk_patched" if you want the root access.
- Reboot.
- Wait for it to boot
Bugs
- No fingerprint is available to set-up
- Let me know if you find any?
Donate
If you like my work, please consider donating:
PayPal: https://www.paypal.com/donate?hosted_button_id=QYSZDSMUGQKWG
This is my 2nd attempt at porting, ever, sorry for not being straight-forward and making this overly complicated.
If this works well for people I might try MIUI next.
And let me know if your device reads/works properly with SD card inserted! I think it may be just my device that doesn't recognize any, but would be nice to get some confirmation.
All credits go to Cleopatra Bianchi for providing TWRP.
(https://www.needrom.com/download/cheetah-twrp-3-0-2-1/)
thank you. smooth and good Rom
Did you find/encounter any bugs?
Hello,
Nothing major problem. Only I can't play downloaded video but I can watch through youtube and facebook. Just blank screen only. Thank you for the rom. Better from the stock rom
hayati1 said:
Hello,
Nothing major problem. Only I can't play downloaded video but I can watch through youtube and facebook. Just blank screen only. Thank you for the rom. Better from the stock rom
Click to expand...
Click to collapse
Hmm, maybe try an app from play store that let's you play videos and see if it works? Like VLC, or something.
Sorry for extremely late reply
Hello friends, I know it's not the right topic, I apologize but I'm trying ... I have a new Cubot Note 20 Pro and I would like a TWRP image for it but I can't find it anywhere. Maybe someone knows an image compatible with my phone. Please, can anybody be so kindly to help me with an advice? Thank you.
Hellera said:
Hello friends, I know it's not the right topic, I apologize but I'm trying ... I have a new Cubot Note 20 Pro and I would like a TWRP image for it but I can't find it anywhere. Maybe someone knows an image compatible with my phone. Please, can anybody be so kindly to help me with an advice? Thank you.
Click to expand...
Click to collapse
You could try auto twrp porter. I used in on my Prestigio 3450DUO and worked LONG time ago. If it doesn't work let me know and I will try to help
Firmware Care
FirmwareCare is one of the ideal firmware download websites, serving Stock Firmware (ROM) for 343 Mobile brands in the World. The Stock Firmware shared on the website came with the Driver, Flash Tool, and How-to Flash Manual.
firmwarecare.com
kazkas1398 said:
You could try auto twrp porter. I used in on my Prestigio 3450DUO and worked LONG time ago. If it doesn't work let me know and I will try to help
Firmware Care
FirmwareCare is one of the ideal firmware download websites, serving Stock Firmware (ROM) for 343 Mobile brands in the World. The Stock Firmware shared on the website came with the Driver, Flash Tool, and How-to Flash Manual.
firmwarecare.com
Click to expand...
Click to collapse
Thank you @kazkas1398, I'll try it... I'll be back!
I understand all of these, I know to work with adb, fastboot commands but I cannot unlock bootloader on my device, Cubot Note 20 Pro. I was searching about 3 days for this, I found what I knew but it seems that no command works in fastboot:
fastboot oem unlock
fastboot oem unlock-go
fastboot flashing unlock
fastboot flashing unlock_critical
fastboot oem unlock_critical
I must mention... Developer options, OEM-unlocking and USB-debugging checked, all MTK and ADB drivers installed, I'm not a begginer... but, of course, I don't know everything. So, I need a little help!
Nothing works, no command... it says "... command not supported in default implementation". I need unlock the bootloader first of all for rooting my device and other reasons.
I'm really frustrated, blocked in this situation! Can anybody help my to unlock bootloader, please? Thank you.
Ok friends, I managed to unlock bootloader, get root... and I tried to port the stock recovery with Mediatek Auto TWRP Recovery Porter.
Then, I flashed vbmeta and recovery images in fastboot mode...
After that, my Cubot Note 20 Pro is booting only in fastboot mode... until I flashed the stock recovery again.
Does anyone have any working solutions, suggestions other than waiting for an official TWRP? Thank you.
Edit:
I found this, I followed all the steps... but it stucked in TWRP logo... waited about 20 minutes... nothing... any solution please?! Thank you.
[MT6771][10]TWRP 3.4.0 Recovery for Cubot Note 20 Pro ~ Techswizz
This TWRP 3.4.0 Recovery For Cubot Note 20 Pro is working fully fine and can be used to flash custom ROMs and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing SuperSu, this is a recommended custom recovery. Please find out more features...
www.techswizz.com
Hellera said:
Ok friends, I managed to unlock bootloader, get root... and I tried to port the stock recovery with Mediatek Auto TWRP Recovery Porter.
Then, I flashed vbmeta and recovery images in fastboot mode...
After that, my Cubot Note 20 Pro is booting only in fastboot mode... until I flashed the stock recovery again.
Does anyone have any working solutions, suggestions other than waiting for an official TWRP? Thank you.
Edit:
I found this, I followed all the steps... but it stucked in TWRP logo... waited about 20 minutes... nothing... any solution please?! Thank you.
[MT6771][10]TWRP 3.4.0 Recovery for Cubot Note 20 Pro ~ Techswizz
This TWRP 3.4.0 Recovery For Cubot Note 20 Pro is working fully fine and can be used to flash custom ROMs and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing SuperSu, this is a recommended custom recovery. Please find out more features...
www.techswizz.com
Click to expand...
Click to collapse
You need to utilize the Hovatek forum.Its a Mediatek phone and they specialize in those phones.I know many of the standard processes we are accustomed to don't work.I have the same phone and with limited searching I was only able to find TWRP 3.4.0 but it freezes while in recovery.Im sure theres something out there more compatible

P20 pro unable to flash recovery

Hello,
I have a P20 Pro with unlocked bootloader, i decided to updated the phone trought OTA by flashing original recovery and instal OTA of Android 10.
After that i wanted to get back to TWRP then root my phone, but i get surprised that the phone bootloader get locked again after update.
I need to unlock my bootloader again in order to use my phone. the command in fastboot : fastboot oem unlock **************** (i put my old unlocking code which already worked 2 years ago)
but i get as a result :
...
FAILED (remote: invalid command)
finished. total time : 0.027s
can anyone help me getting back my bootloader unlocked and twrp installed please ? i dont want loose my phone
NB : i confirm again that my code was working before on android 9 and had bootloader unlocked
Rovyo said:
Hello,
I have a P20 Pro with unlocked bootloader, i decided to updated the phone trought OTA by flashing original recovery and instal OTA of Android 10.
After that i wanted to get back to TWRP then root my phone, but i get surprised that the phone bootloader get locked again after update.
I need to unlock my bootloader again in order to use my phone. the command in fastboot : fastboot oem unlock **************** (i put my old unlocking code which already worked 2 years ago)
but i get as a result :
...
FAILED (remote: invalid command)
finished. total time : 0.027s
can anyone help me getting back my bootloader unlocked and twrp installed please ? i dont want loose my phone
NB : i confirm again that my code was working before on android 9 and had bootloader unlocked
Click to expand...
Click to collapse
You idiot EMUI 10 cannot be bootloader unlocked, downgrade to EMUI 9.0!!!
If you want android 10 or even 11 you need something called a GSI, which I can inform you about it.
jjgvv said:
You idiot EMUI 10 cannot be bootloader unlocked, downgrade to EMUI 9.0!!!
If you want android 10 or even 11 you need something called a GSI, which I can inform you about it.
Click to expand...
Click to collapse
i'm really an idiot i can confirm that, how to downgrade please ? my bootloader in locked right now
Rovyo said:
i'm really an idiot i can confirm that, how to downgrade please ? my bootloader in locked right now
Click to expand...
Click to collapse
HISUITE
jjgvv said:
HISUITE
Click to expand...
Click to collapse
You saved me mate, was really a dumb move to go thought OTA without checking this point. Didn't now Huawei become that ******
Any advice for a good custom rom based on android 10 ?
And thanks again for your precious help
Rovyo said:
You saved me mate, was really a dumb move to go thought OTA without checking this point. Didn't now Huawei become that ******
Any advice for a good custom rom based on android 10 ?
And thanks again for your precious help
Click to expand...
Click to collapse
I can get you Android 11 actually, though there are a few bugs on both 10 and 11.
jjgvv said:
I can get you Android 11 actually
Click to expand...
Click to collapse
even better if it is android 11, i will try it
also have another dumb question : if i install TWRP on the EMUI 9.1 with unlocked bootloader, can i flash the emui 10 rom thought TWRP ? or this will brick the phone ?
Rovyo said:
even better if it is android 11, i will try it
also have another dumb question : if i install TWRP on the EMUI 9.1 with unlocked bootloader, can i flash the emui 10 rom thought TWRP ? or this will brick the phone ?
Click to expand...
Click to collapse
Yes, system will be 'destroyed', as you modded the recovery.
jjgvv said:
Yes, system will be 'destroyed', as you modded the recovery.
Click to expand...
Click to collapse
that what i was thinking also, so bye Emui 10 for ever i guess.
what was the rom base on android 11 you are referring to ?
GSI Project treble rom.
The definition is https://source.android.com/setup/bu...tem image (GSI,or higher can run successfully.
Google's Offical GSI will not boot on huaweis though.
After unlock bootloader download this https://github.com/phhusson/treble_...v300.l/system-roar-arm64-aonly-vanilla.img.xz
use 7zip(https://www.7-zip.org/a/7z1900-x64.exe) to extract the file once and rename it to system.img and move to C drive WITHOUT under any folders.
Then go to recovery and factory reset, do not advance wipe, wipe>factory reset only
Then go to fastboot and
fastboot flash system C:\system.img
Failing to follow will result in rage!
Backup System, Vendor, Data and Internal storage in TWRP before doing anything will be a wise choice, in case anything is wrong.
Forgot to mention you must flash magisk in TWRP before installing rom, to disable AVB(Android Vertified Boot) so that a custom rom can be loaded.
jjgvv said:
Backup System, Vendor, Data and Internal storage in TWRP before doing anything will be a wise choice, in case anything is wrong.
Click to expand...
Click to collapse
Yeah for sur, i'm rolling back, unlocking BL then TWRP in order to get a full backup. I ll check the rom after that
A senior member refer to for EMUI 10 upgrading :
"Don't update system via OTA when phone is rooted or bootloader unlock. Flash firmware via erecovery and rooted again"
i think this is incorrect right ? he cant root again while on EMUI 10 ?
jjgvv said:
Forgot to mention you must flash magisk in TWRP before installing rom, to disable AVB(Android Vertified Boot) so that a custom rom can be loaded.
Click to expand...
Click to collapse
thanks for the proper advice
Rovyo said:
Yeah for sur, i'm rolling back, unlocking BL then TWRP in order to get a full backup. I ll check the rom after that
A senior member refer to for EMUI 10 upgrading :
"Don't update system via OTA when phone is rooted or bootloader unlock. Flash firmware via erecovery and rooted again"
i think this is incorrect right ? he cant root again while on EMUI 10 ?
Click to expand...
Click to collapse
https://github.com/SkyEmie/huawei-honor-unlock-bootloader
Read troubleshooting part, EMUI 10 cannot unlock bootloader
jjgvv said:
https://github.com/SkyEmie/huawei-honor-unlock-bootloader
Read troubleshooting part, EMUI 10 cannot unlock bootloader
Click to expand...
Click to collapse
the lasted TWRP release cant decrypt the data, trying to find a working one and the phone don't want to boot to recovery anymore even with volume up + power bouton or via command adb reboot recovery. seems a good day hahaha
Still boots fastboot? Otherwise you are screwed
jjgvv said:
Still boots fastboot? Otherwise you are screwed
Click to expand...
Click to collapse
what do you mean ? yes i still can go on fastboot and already rolled back to Emui 9.1
just want to boot on damn recovery hahaha and if it can decrypt daba will be great
jjgvv said:
Still boots fastboot? Otherwise you are screwed
Click to expand...
Click to collapse
well i'm stuck with twrp not decrypting my data
i managed to install TWRP (several version), boot on them and so nothing to do
also can get root easily and magisk as i sideload zip from crypted TWRP version (worked)
tried the version twrp_clt_0.1.img from XDA stuck on TWRP starting screen
i'm almost giving up
Extract Android 11 Gsi, rename to system.img and move to C drive , not under any folders.
Go to fastboot then
Fastboot erase data
Fastboot erase cache
Fastboot flash system C:\system.img

Categories

Resources