Hi people, I have ran into a bit of an issue here that I have not found anywhere.
I wanted to try out CM12.1 + CAF Kernel for my Moto G XT1032, which was running Android 5.0.2. However, after install, I'm not able to boot into the OS or even recovery anymore. I get to fastboot, select either "Normal Powerup" or "Recovery", the phone gets to the "Bootloader Unlocked" warning, then shuts off without showing an animation or anything.
What can I do with this? I've been modding Android for some years now, but I have never ran into an issue like this. Thanks!
Ok, quick update. I got it to boot up on CM12.1, however, the recovery menu erased by itself. Reflashed it in order to get Gapps, rebooted, and now I'm back into the same issue.
What could it be?
Related
I have a Moto G (from Republic Wireless) and started having the Boot loop problem.
When I try to go for fastboot, then volume up to select recovery, the motorola logo appears, but no android logo after. Then the boot loop starts again. Anyone help me please?
Did you flash an older android version?
Same same but different
I have the same issue. Although I actually get as far as to getting to the lock screen and unlock that and then I get about 3 seconds then I get the 'Powering Off' message and the phone turns itself off.
I have enough time to go in and put it in debug mode but the phone never recognises the computer once in bootloader, I think it most likely have something to do with the driver for 'Fastboot falcon s' not working. Can't install a new one or in any way make my phone communicate with my computer. Have all the latest Moto device manager stuff installed too. I also think I have the wrong firmware installed (US and not AUS version) along with a heavily corrupted (or even completely missing) recovery image.
Have tried flashing a new recovery image but I keep getting either a blank response from 'adb devices' or 'fastboot devices' and whenever I try and issue a command that would hopefully result in anything other than the **** I am currently stuck in I get a 'waiting for device'.
All this because I tried to go from Unlocked Bootloader and CM11 (that wouldn't let me use mobile data or kept crashing on me, like 24/7) to stock Android and Relock the Bootloader.
I am pretty much losing my **** here, just happy it was only a $250 device though.
Does anyone have anything on this?
oh well, giving up on this. Contacted Republic Wireless and and they're sending me a replacement.
I've got a Moto G (1.gen) XT1032 that I'm using temporarily while waiting for repair parts for my Nexus 5.
I managed to install Android 5.1 GPe version on the phone, and the boot sequence show it's unlocked (open padlock image). Everything kinda works fine, except I want to root the phone.
So I boot into recovery mode, I get the list of options, go down to "recovery", then up, and after a moment I now get the famous red triangle. I have searched a lot and it seems it's quite common to have this with a "no command" text, but I have no text or anything, just the dead android image. From here I've tried all the suggestions with holding up+down and hitting power, in various combinations, but nothing works. The only result I get is the phone reboots into normal mode.
I've tried to flash both the openrecovery-twrp-2.8.1.0-xt1032.img, the moto-g-CWM-recovery.img and even the standard recovery.img, but they all just throw an error in fastboot and nothing happens.
I've tried for many days, gone though every post here and on other websites, but finally have to admit defeat. I'm at the end of the line, no more ideas. Anyone seen this before? What am I missing?
In my frustration I kept tapping up+down+power while on the dead-android-red-triangle page and suddenly the recovery menu appeared. Must be a timing issue somehow.
Just wanting some advice (if any) to a white line issue I'm having with this tablet. I bought this tablet with Lollipop 5.0.1 already installed. I managed to get it downgraded, rooted, and currently have TWRP installed as well as CM12.1 nightly. The problem I have is that as soon as I install ANY custom recovery (TWRP or CWM recovery) it boots normally at first giving me the LG logo. Then, instead of getting the AT&T logo (or the CM custom boot animation), it gives me a series of white lines spamming from top to bottom of the screen. I know for a fact it has to be software related as when I return to stock KK everything boots fine, giving me the LG logo followed by the AT&T logo. I did NOT use the ADB method. Instead I downgraded using the LG Flash Tool, and a test KDZ file, which allowed me to install Flashify, then TWRP. My problem ONLY begins once I install ANY custom recovery. This process did not unlock my bootloader, however. Could this be my culprit, or would it be something else? Any help is greatly appreciated, and thanks in advance for any help/tips. More information is completely available upon request.
P.S. The white lines eventually disappear when the screen goes to sleep on it's own. I can then press the power button to wake the device which gives me the lock screen as normal. I just want to know if I can get the boot animation working. Everything else works fine.
You found cwm?
Hello guys.
I apologize for making yet another "my phone is soft-bricked" thread, but I have been through at least 20-25 of the other threads, seemingly tried everything, and I can't get past my problem. Also, most of the other threads I saw are pretty old and not really active anymore. A few of the tools there can't even be downloaded anymore because the links are dead.
Anyway, here's my story.
I have a 16 GB US retail XT1032 that I bought mostly to give tech support to my parents, whom I also bought a 8GB each. Theirs, I left untouched. Mine, I unlocked bootloader and rooted right away. All went well for a long time.
My parents kept receiving OTA's and it took them all the way to Lollipop. Me being rooted, I got stuck in KitKat somewhere (I'm not 100% sure whether that was in 4.4.2 or 4.4.4), but since it wasn't my daily driver, I let it lie as stock rooted KitKat. Recently I wanted to go to Lollipop in order to keep seeing "the same things" as my parents, and I installed TWRP in preparation to flash a "stock enhanced" version of Lollipop. TWRP flashed fine but there was something funny all along: I could use ADB or a root app to boot into recovery from the ROM, but I could never manage to get the phone to go into recovery by booting into fastboot (vol down+power) and then choosing recovery. Screen would go black and recovery would never load.
So I copied a "stock" Lollipop image and booted into TWRP from the ROM and wiped everything and tried flashing the Lollipop ROM. It got stuck somewhere part way, and a few hours later there was no more progress.
Ever since then, I am stuck in fastboot. Fastboot seemingly works correctly, recently I was able to flash an OG animation to get rid of the nasty "your bootloader is unlocked" warning. I can flash recoveries (TWRP and/or CWM) without error on the phone or the computer, but when I try to then boot into recovery using the bootloader, I get stuck on the black screen and go nowhere.
As others in the various threads have commented, when I try to boot "normally", I get the boot animation and a vibration and then it gets stuck.
I have tried so many things by reading different threads I couldn't tell you anymore what all of them were. I've gotten errors about downgrading, I've gotten stuck in fastboot reason: "failed flash", I've gotten flashing errors about the size of recovery or boot or gpt. What I've never managed to do again is to boot into anything other than bootloader. No recovery and no ROM.
Could someone with a bit of experience please point me to some working links and/or when you have the time, help me look at a couple of logs or something that can help me figure out where my problem lies and how to get out of it? my daily driver phablet died a gruesome death and I wanted to go back to my trusty moto g, to no avail.
Thank you very much to whomever can help.
Ruben.
Try to reflash full stock firmware for your device according to your bootloader version. Hope it helps....
Try typing in fastboot devices
I unrooted my phone through Magisk Manager to get the Android 10 update, and I guess I missed a step. Because when my phone rebooted, it comes up with the "No Command" screen after showing the unlocked bootloader warning.
I am able to enter the recovery mode and all of those settings, but my phone wont boot normally. It doesn't even show the Motorola "M". If I leave it on for a bit, it will switch between the unlocked bootloader warning and the no command screen. I've already tried a factory reset but that does nothing.
Am I stuck with a broken phone, or is there another hope? I'll do my best to provide more info if needed. Please help!
Randomsamm said:
I unrooted my phone through Magisk Manager to get the Android 10 update, and I guess I missed a step. Because when my phone rebooted, it comes up with the "No Command" screen after showing the unlocked bootloader warning.
I am able to enter the recovery mode and all of those settings, but my phone wont boot normally. It doesn't even show the Motorola "M". If I leave it on for a bit, it will switch between the unlocked bootloader warning and the no command screen. I've already tried a factory reset but that does nothing.
Am I stuck with a broken phone, or is there another hope? I'll do my best to provide more info if needed. Please help!
Click to expand...
Click to collapse
What recovery u using I would look for orange fox and fastboot into that there is more things u can do if you don't want to save any thing I would reflash using orange fox recovery the rom u want I would use bliss or havoc I'm on now supper stable everything works and it's Android 10