Hello i'm in a trouble! - General Questions and Answers

Hi everyone.
I have a problem with my LG G4C H525N has stuck in bootloop after i update it to Version 6.0 (Marshmallow).
I update it with LG Bridge.
Please can anyone help me!
Thanks!!

Factory reset and clear cache if you can get to recovery or flashing stock firmware if you can't.

thanks
Professor Woland said:
Factory reset and clear cache if you can get to recovery or flashing stock firmware if you can't.
Click to expand...
Click to collapse
Thank you i make a factory data reset and everything it's looks fine now!! Thank you very much Professor

Related

Nexus 5 broke :(

Hi everyone,
i think i broke my nexus, i unlockt the bootloader and installt CWM with the Squabbi - Nexus 5 Kit - 1.0 and now it stucks at the google logo.
and i cant boot into bootloader.
Pleas help me :crying:
see this thread - http://forum.xda-developers.com/showthread.php?t=2513701
Try going into the bootloader, then recovery, and doing a reset.
daavid1995 said:
Hi everyone,
i think i broke my nexus, i unlockt the bootloader and installt CWM with the Squabbi - Nexus 5 Kit - 1.0 and now it stucks at the google logo.
and i cant boot into bootloader.
Pleas help me :crying:
Click to expand...
Click to collapse
You need to do some more reading before trying to mess with your phone again. Assuming you get it working.
Nitemare3219 said:
Try going into the bootloader, then recovery, and doing a reset.
Click to expand...
Click to collapse
And you need to learn how to read, period.
I installed the factory image but it stucks now at the bootanimation, please helpm me
daavid1995 said:
I installed the factory image but it stucks now at the bootanimation, please helpm me
Click to expand...
Click to collapse
Do a factory reset in the stock recovery and wipe cache.
jd1639 said:
Do a factory reset in the stock recovery and wipe cache.
Click to expand...
Click to collapse
Thanks now it works! :good:
daavid1995 said:
Thanks now it works! :good:
Click to expand...
Click to collapse
Works almost every time. Good you got it working!

[Q] Nexus 5 totally wiped

I have completely wiped my phone trying to install a rom and there is nothing what so ever on it . How do install a rom to it? Please help!!
Mr Shax said:
I have completely wiped my phone trying to install a rom and there is nothing what so ever on it . How do install a rom to it? Please help!!
Click to expand...
Click to collapse
You know the sticky threads that explain how to flash a rom? They're full of information. You can flash the factory image in a few minutes.
Mr Shax said:
I have completely wiped my phone trying to install a rom and there is nothing what so ever on it . How do install a rom to it? Please help!!
Click to expand...
Click to collapse
As said above flash stock in fastboot or push/sideload a custom rom with adb in (custom) recovery.

[Q] What to do when you get 5.0?

Hey there everyone
What should i do when i update to 5.0?
Should i factory reset or not
bublz654 said:
Hey there everyone
What should i do when i update to 5.0?
Should i factory reset or not
Click to expand...
Click to collapse
Hey buddy Factory Reset is not necessary, but it is recommended. If you do it then the phone will be much faster (won't experience lag). Also wipe Cache so that you boot into a fresh ROM and avoid any issues.
Don't forget to make a backup first!
Mustajab Is'haq said:
Hey buddy Factory Reset is not necessary, but it is recommended. If you do it then the phone will be much faster (won't experience lag). Also wipe Cache so that you boot into a fresh ROM and avoid any issues.
Don't forget to make a backup first!
Click to expand...
Click to collapse
Ok great, so i clear cache when I install 5.0 or before?
bublz654 said:
Ok great, so i clear cache when I install 5.0 or before?
Click to expand...
Click to collapse
After you install 5.0. Just wipe cache and factory reset if possible.
Mustajab Is'haq said:
After you install 5.0. Just wipe cache and factory reset if possible.
Click to expand...
Click to collapse
But how is that possible after you install 5.0 it automatically reboots after you install it
bublz654 said:
But how is that possible after you install 5.0 it automatically reboots after you install it
Click to expand...
Click to collapse
1. Download the update.
2. Let it reboot.
3. Go into recovery.
4. Wipe cache.
5. Restore backups (if any), reboot.
6. Continue to use phone as usual.
7. Enjoy.
Mustajab Is'haq said:
1. Download the update.
2. Let it reboot.
3. Go into recovery.
4. Wipe cache.
5. Restore backups (if any), reboot.
6. Continue to use phone as usual.
7. Enjoy.
Click to expand...
Click to collapse
So you let it reboot once then you turn off phone again and go into recovery?
bublz654 said:
So you let it reboot once then you turn off phone again and go into recovery?
Click to expand...
Click to collapse
Yes.
Mustajab Is'haq said:
Yes.
Click to expand...
Click to collapse
Ok cool thanks for your help [emoji14] (sorry for the nooby questions I'm not used to wiping cache after OTA lol)
bublz654 said:
Ok cool thanks for your help [emoji14] (sorry for the nooby questions I'm not used to wiping cache after OTA lol)
Click to expand...
Click to collapse
No problem. Wiping cache just after OTA supposedly helps the new software that has been installed.
I've never done it in any of my phones, not with the moto g. I also haven't faced any lag and I never factory reset or wiped my cache after OTA. But your results may vary. Better safe than sorry my friend. Good luck!

factory recovery image for urbane 2

Hi,
Mine device is not booting.
Anyone can share the link to the recovery factory default image files.
I need above to factory restore and try.
Thanks in advanced.
kakabobo said:
Hi,
Mine device is not booting.
Anyone can share the link to the recovery factory default image files.
I need above to factory restore and try.
Thanks in advanced.
Click to expand...
Click to collapse
Hi here in some thread are links for update Verizon version LG W200 to Android Wear 2 and back to stock. You can use it with no problem.

Bootloop in the logo of MI.

Hi. Sorry my bad english. It is not my native language.
I have a Xiaomi Mi Mix 3 that was originally Chinese. with miflash install a global ROM, without any problem.
Now and wanted to try the customized ROMs. I have already tested several official and unofficial TWRPs. several tutorials and I could not boot the ROM restarted in the logo of MI.
I've also tried several guides and nothing. the same result install without any problem but not start, just restart and restart.
Can someone give me advice about what I'm doing wrong? In advance thanks for the help.
I will be on the lookout. Greetings.
Welcome to the forum! Your English is fine mate.
Did you do a factory reset in TWRP before you booted?
Hi, thanks for answering.
I've done it in several ways. Format data with yes to avoid encryption problems. then a factory reset. and proceed to install the ROM and nothing. infinite restarts.
I have also tried after this to do another factory reset and install ROM and also formatting everything except the internal unit manually.
What I was thinking is if it has something to do with having Xiaomi's account and has not closed it before.
cesarkb8 said:
Hi, thanks for answering.
I've done it in several ways. Format data with yes to avoid encryption problems. then a factory reset. and proceed to install the ROM and nothing. infinite restarts.
I have also tried after this to do another factory reset and install ROM and also formatting everything except the internal unit manually.
What I was thinking is if it has something to do with having Xiaomi's account and has not closed it before.
Click to expand...
Click to collapse
Try this
1.format data
2.flash eu firmware 9.6.27
3.let it boot
4.reboot to TWRP and wipe
5.flash 9.2.15 firmware (to have proximity sensor working) without rebooting flash rom(pe,pe caf,rr,los,Evo)if you are flashing rr or los you will need gapps
6.flash magisk if you like
7. Reboot
9.2.15 firmware
https://androidfilehost.com/?fid=1395089523397963751
raven213 said:
Try this
1.format data
2.flash eu firmware 9.6.27
3.let it boot
4.reboot to TWRP and wipe
5.flash 9.2.15 firmware (to have proximity sensor working) without rebooting flash rom(pe,pe caf,rr,los,Evo)if you are flashing rr or los you will need gapps
6.flash magisk if you like
7. Reboot
9.2.15 firmware
https://androidfilehost.com/?fid=1395089523397963751
Click to expand...
Click to collapse
Thank you. I'm going to do it and I'll tell you the result. Greetings.
cesarkb8 said:
Thank you. I'm going to do it and I'll tell you the result. Greetings.
Click to expand...
Click to collapse
Alright good luck
raven213 said:
Alright good luck
Click to expand...
Click to collapse
Thank you very much bro. It served to perfection. Greetings.
cesarkb8 said:
Thank you very much bro. It served to perfection. Greetings.
Click to expand...
Click to collapse
Awesome

Categories

Resources