Hey guys,
I have attempted to connect my Mate 8 via Hisuite to my laptop, but everytime I tried it, it returned an error. HIsuite asks me to either replug my phone in or to restart it, which I have tried but with no success.
did you enable either hdb or usb debugging support?
Related
I had been hard resetting my Huawei phone and it ended up dying while resetting itself. My fault for not charging it before proceeding with the reset. Anywho, now it is stuck in FASTBOOT&RESCUE MODE which wont allow me to access my device. Whenever I connect it to my computer, Hisuite automatically starts up, but it continually states my device is not connected. Apparently, I need to have USB debugging enabled; but I am unable to do so without access to my phone. Does ANYONE know what to do? I have scoured everywhere and haven't found any successful solutions.
jayboi247 said:
I had been hard resetting my Huawei phone and it ended up dying while resetting itself. My fault for not charging it before proceeding with the reset. Anywho, now it is stuck in FASTBOOT&RESCUE MODE which wont allow me to access my device. Whenever I connect it to my computer, Hisuite automatically starts up, but it continually states my device is not connected. Apparently, I need to have USB debugging enabled; but I am unable to do so without access to my phone. Does ANYONE know what to do? I have scoured everywhere and haven't found any successful solutions.
Click to expand...
Click to collapse
This might help you, uninstall usb divers of your specific device which you have previously installed and try to install the latest version again..Connect your phone in main usb port not in secondary hubs..Try it and report..
Currently using g play mini.My phone's build number is B160.Android kitkat 4.4.2
Recently cannot connect my phone as usb storage.After connecting to pc with usb cable phone only charges.USB debugging is not showing.(usb debugging is enabled from developer option).what to do?
Kayes360 said:
Currently using g play mini.My phone's build number is B160.Android kitkat 4.4.2
Recently cannot connect my phone as usb storage.After connecting to pc with usb cable phone only charges.USB debugging is not showing.(usb debugging is enabled from developer option).what to do?
Click to expand...
Click to collapse
I have had same problem. But the reason for it happenning was that there was something wrong with my pc usb ports(though the problems only happens when I have phone connected to it). Restarting pc usually fixes it.
No idea will this help.
Hello
ir i've tried restarting the pc couple of times but no result and also tested on another pc and usb cables.
thinking to visiting customer care centre
did you try to factory reset
Title should say USB my fat fingers ! phone is completely stock no attempts to root. Enabled developer options fine. toggle the USB debugging switch. Get the Allow USB debugging? pop up. Click ok. Don't get any kind of debugging enabled notification. Restore default settings button is shown at the bottom of screen - i ignore this. Hit home or settings menu then go back to Developer options and the USB debugging switch is toggled off again. I tried restarting, developer options has stayed visible in settings but still can't get USB debugging to stick. PLEASE any suggestions what i'm missing?? Thanks
I also have the same problem with my mate 9. Allow usb debugging setting automatically toggles off as soon as I leave the settings menu.
Hi boys..
reasonable for this behaviour are the developer mode switches 1.) "Allow ADB debugging in charge only mode" and 2.) "Always prompt when connecting to USB"!!!
If switch 1.) is not set to "on", and switch 2.) is not set to "off", the switch "debugging allowed" would be cancelled every time you leave this menu!
So it does, what it have to do! Cancelling debug mode if phone would be connected to any other device without transferring data (if only charged). Easy, or not?
(see signature 1+2!)
hi man
i have a problem
my phone is huawei p40 pro
how to fix usb c port of the phone not function only charging , no fastboot ,no mtp ,no usb debugging ,no hdb
this is what i did
at the first usb c works fine
untill i did downgraded from version 11.0.0.190(c185R3) to version EMUI 11.0.0.153(c185R3)
i used hisuite proxy method and i got firmwares from https://www.firmfinder.ml/
after phone bootup 11.0.0.153 firmware , it seems usb c port disabled and just charging works
even i couldn't toggle usb debugging and change usb mode to MTP
after that i again downgraded to 10.1.0.114(c185R3) and nothing change . still usb c disabled
so i couldn't connect my phone to usb , and even i couldn't use usb otg
so i decided to use my phone itself's online update. i run updating first to 10.1.0.183 and nothing changed
again updated with itself's online update. update to 11.0.0.153 and still nothing changed
finaly the last firmware update. i updated with itself's online update to 11.0.0.195 . and see usb c work , even usb otg , and usb debugging and MTP , all works perfect
can you explain what happend on my phone and why usb don't work when i use hisuite proxy method ?
i did it again and again , all same results
It seems that the official update with the phone itself ( without pc ) is the only way to solve the problem
today some one tells me another way ,
can anyone test this way?
firlando said:
Hi there,
Huawei July Patch 2021 close all posibility to downgrade the FIRMWARE, it can be done with Hisuite Proxy but you have to choose the correct FIRMWARE and suitable to your Phone region. Once it done you can fix the "DISABLE USB" by doing OTA update to latest FIRMWARE to make it works.
When you choose the wrong cust/preload/mainFW your phone will be locked with that current FIRMWARE with "DISABLE USB" forever, you can solve this by searching the correct FIRMWARE and flash it using NMCARD the FIRMWARE should be a Higher than your Current FIRMWARE INSTALLED. after all done you can get OTA update and do OTA Update to latest FIRMWARE to make USB WORK.
Please be NOTED : Testpoin Not Working with latest July 2021 Firmware Patch so Huawei Block any downgrade posibility
I found 2 Brand USB Thumbdrive which is work with "DISABLE USB" you can do such Dload or restore Lzplay to instal GMS before update with OTA UPDATE. Here I attached the USB Thumb Drive.
Click to expand...
Click to collapse
Phone doesnt recognise usb.
Please i need help fast. Im going away tomorrow and i need my phone. I had gms successfully installed earlier today, but i accidentally deleted something and it stopped working, so i factory reset multiple times, even upgraded to emui 11 but...
forum.xda-developers.com
I recently rooted my s8+. Now when I connect it to my PC (or even my wife's PC), I get the following on my phone, "Attention: the connected device is unable to access data on this device. Please disconnect the USB cable and try again". I'm using the USB cable that came with my phone and the issue is happeing on 2 different PC's. I have USB debugging checked and set to MTP.
in settings, Switch on Developers options in configuratien. Then there is a USB modus setting. Set it to Charging rather then MTP Transfer.
try another USB cable and update the drivers in device manager.
jidamo said:
in settings, Switch on Developers options in configuratien. Then there is a USB modus setting. Set it to Charging rather then MTP Transfer.
try another USB cable and update the drivers in device manager.
Click to expand...
Click to collapse
Ok, I've tried your suggestions but the problem still persists. What's worse, I unrooted the phone and did a factory reset and it STILL is unable to access the data on the device.
Hi guys, today i wanted to unlock the bootloader and flashing twrp in my Honor 8 but i got stuck pretty soon...
First of all my PC didn't recognize the device when i plugged it in the USB port but i discovered that i had to enable the "Google Mode" via the menu that shows up if you dial *#*#2846579#*#* in the dialer. It worked!
I enabled the debug, allowed my PC and finally i unlocked the bootloader. As you may know this formmatted the device. When i booted it up again i wanted to do the same thing but the "Google Mode" didn't work this time, and now i can't do nothing. I can enable USB debug in the settings but it does not show up the window "Allow for this computer". Also i can't browse my files from windows. It uses the connection just for charging and there is no notification where i can set the mode to MTP or anything else.
Do you have any suggestions? I already tried different computers and different USB ports.
PS. I also tried that useless software which is Hisuite but guess what, it says "Device is not connected"