Related
Hey Guys,
I have a Motorola RAZR HD XT925 which was sourced from Rogers Canada. I was wondering how I can check the devices LTE frequencies? Is there any engineering code and/or menu that would assist with this? This device apparently supports LTE 800 / 1800 / 2600 or LTE 700 / 800 / 1700 / 1800 / 2600 according to GSM Arena. I am wanting to use the LTE 1800MHz frequency in Australia, though cannot get it to connect.
I have tried the following:
Searching for networks manually / letting the device select them automatically
Toggling between 3G only and Automatic (4G/3G/2G)
I definitely have the correct APN settings configured (for Telstra in Australia)
Data is enabled, the SIM card connects to 4G in another mobile
Any assistance would be appreciated, in finding out which LTE network frequencies this device supports.
MarrkDaviid said:
Hey Guys,
I have a Motorola RAZR HD XT925 which was sourced from Rogers Canada. I was wondering how I can check the devices LTE frequencies? Is there any engineering code and/or menu that would assist with this? This device apparently supports LTE 800 / 1800 / 2600 or LTE 700 / 800 / 1700 / 1800 / 2600 according to GSM Arena. I am wanting to use the LTE 1800MHz frequency in Australia, though cannot get it to connect.
I have tried the following:
Searching for networks manually / letting the device select them automatically
Toggling between 3G only and Automatic (4G/3G/2G)
I definitely have the correct APN settings configured (for Telstra in Australia)
Data is enabled, the SIM card connects to 4G in another mobile
Any assistance would be appreciated, in finding out which LTE network frequencies this device supports.
Click to expand...
Click to collapse
Do not rely on GSM Arena those guys are rookies.
The Rogers RAZR HD has LTE 700/1700/2100 via the rogers website.
MarrkDaviid said:
Hey Guys,
I have a Motorola RAZR HD XT925 which was sourced from Rogers Canada. I was wondering how I can check the devices LTE frequencies? Is there any engineering code and/or menu that would assist with this? This device apparently supports LTE 800 / 1800 / 2600 or LTE 700 / 800 / 1700 / 1800 / 2600 according to GSM Arena. I am wanting to use the LTE 1800MHz frequency in Australia, though cannot get it to connect.
I have tried the following:
Searching for networks manually / letting the device select them automatically
Toggling between 3G only and Automatic (4G/3G/2G)
I definitely have the correct APN settings configured (for Telstra in Australia)
Data is enabled, the SIM card connects to 4G in another mobile
Any assistance would be appreciated, in finding out which LTE network frequencies this device supports.
Click to expand...
Click to collapse
XT925: (international)
Secondary Cellular Networks: LTE700 (B17), LTE1700/2100 (B4), LTE1800 (B3), LTE2600 (B7), LTE800 (B20)
From what I've read, B3 is Australia's LTE band, so it is supported, but it might be turned off in roger's radio.
Have you tried installing the firmware for Telstra? It's available here: http://sbf.droid-developers.org/van...25_A045_WIG149790_Service1FF_fastboot.xml.zip from this thread: http://forum.xda-developers.com/showthread.php?t=1943879 Maybe switching to your provider's firmware will fix the LTE issue.
Hi
Can you please provide an update. Did you manage to flash the Testra fw and latch in to the LTE 1800 band?
Coz i would like to buy a phone and do the same thing as you. I would not buy if you did not suceed.
MarrkDaviid said:
Hey Guys,
I have a Motorola RAZR HD XT925 which was sourced from Rogers Canada. I was wondering how I can check the devices LTE frequencies? Is there any engineering code and/or menu that would assist with this? This device apparently supports LTE 800 / 1800 / 2600 or LTE 700 / 800 / 1700 / 1800 / 2600 according to GSM Arena. I am wanting to use the LTE 1800MHz frequency in Australia, though cannot get it to connect.
I have tried the following:
Searching for networks manually / letting the device select them automatically
Toggling between 3G only and Automatic (4G/3G/2G)
I definitely have the correct APN settings configured (for Telstra in Australia)
Data is enabled, the SIM card connects to 4G in another mobile
Any assistance would be appreciated, in finding out which LTE network frequencies this device supports.
Click to expand...
Click to collapse
Hi. This is a good source here in Australia. Hopefully is updated and current. http://whirlpool.net.au/wiki/mobile_phone_frequencies
Note, however, that LTE is really new here and not yet well implemented. I live in Sydney, but I'm outside of the LTE network at home. I'd have to travel closer to the business district to get it. I think its implemented around the airport as well. LTE is still a work in progress and Telstra is ahead of the game with the other telcos, but you're going to want to be able to connect to their "Next G" or 3.5 G to fallback on otherwise youre going to get 2G.
In any case, you want to make sure your APN settings are correct as well. There is loads of misinformation about that. You can have Telstra set them for you (or at least it worked on my Galaxy S2, haven't tried with this phone since I got it from their store). Try this link and see if it the correct one: http://www.configure.telstra.com.au/telstra/index.jsp
On my Galaxy S2, I had read lots of documentation and had things working but found that after going through a Telstra automated thing (I think the above link), that it set my APNs for me and I ended up with better speed and signal.
Just found this from their site as well concerning their 4G and 3G frequencies: http://www.telstra.com.au/mobile-phones/coverage-networks/networks/
The 2100 frequency on their 3G or NextG (3.5G) may have been turned off at this point; I don't remember. They may still be using it for legacy phones and people on bring your own phone plans but I beleive they had wanted to either shut it down or sell it to another carrier. I don't recall that my SGS2 got 850 ... I just noticed there's tabs on the Telstra page that explains their coverage. Click on them and that's more accurate than what I just typed
I suspect your problem is that you may not be in an LTE covered area. Either that or its your APN settings. Let us know how it goes.
EDIT: Sorry, I didn't read your post properly that the SIM works in another device. If it isn't your APN settings, you can take it to a Telstra store and ask them if they know what the problem is. On occasion they do know what their talking about. You can point them at this web page if need be and it might encourage them to look a little deeper:
http://www.morecellphone.com/compar...d-xt925-vs-motorola-droid-razr-hd-xt926/39060
[
pandabear said:
Can you please provide an update. Did you manage to flash the Testra fw and latch in to the LTE 1800 band?
Click to expand...
Click to collapse
I no longer have this device, and unfortunately never tried flashing the Telstra firmware on the device.
PantsDownJedi said:
you can take it to a Telstra store and ask them if they know what the problem is. On occasion they do know what their talking about.
Click to expand...
Click to collapse
The device that I had was sourced from Rogers Canada, and didn't support LTE 1800MHz out of the box. They wouldn't have been able to help.
PantsDownJedi said:
The 2100 frequency on their 3G or NextG (3.5G) may have been turned off at this point; I don't remember. They may still be using it for legacy phones and people on bring your own phone plans but I beleive they had wanted to either shut it down or sell it to another carrier.
Click to expand...
Click to collapse
Telstra's 3G 2100MHz network was part of 3GIS, an agreement between Telstra and VHA, which ended on August 31st. Telstra still uses the 3G 2100MHz network frequency, it is actually part of their Next G network now, they however do not advertise this, as very few sites are still using this network frequency, and it is far more important to have a device that supports 3G 850MHz. Telstra lost quite a few 3G 2100MHz sites when 3GIS closed, although all of the areas would have had 3G 850MHz anyhow, so it was not really a big deal.
Just wanted to give some info I found using QPST(qualcomm software) to see what cell bands are configured for our HTC One M8. I even looked at the Rezound bands as well. As most of you know, verizon didn't carrier lock our phones, so if we switch to global or even GSM network, we can use other carriers GSM SIM cards. Just need to properly configure the APN's of course. Below are the bands that the phone will search for when Global Network is selected. I pulled this configuration from my actual device. The Rezound only was missing Bit 19 & 49 selection, but everything else was selected:
[Bit_00] Band Class 0, A-System
[Bit_01] Band Class 0, B-System
[Bit_02] Band Class 1, all blocks
[Bit_07] GSM DCS 1800 band
[Bit_08] GSM Extended GSM (E-GSM) band
[Bit_09] GSM Primary GSM (P-GSM) band
[Bit_19] GSM 850 band
[Bit_21] GSM PCS 1900 band
[Bit_22] WCDMA Band I - EUROPE JAPAN & CHINA IMT 2100 band
[Bit_23] WCDMA Band II - US PCS 1900 band
[Bit_26] WCDMA Band V - US 850 band
[Bit_49] WCDMA Band VIII - EUROPE & JAPAN 900 band
I'm guessing the reason some of us are having issues on Tmobile is that the AWS bands are missing? Can we enable them somehow?
hyperfire21 said:
I'm guessing the reason some of us are having issues on Tmobile is that the AWS bands are missing? Can we enable them somehow?
Click to expand...
Click to collapse
It could possibly be activated using QPST, but there are other steps to do it. The only issue is that since QPST is the QualComm radio programing, there is potential to lose signal quality or lose all radio functionality. That said, it could also be possible to recover by flashing the original firmware or RUU to recover. I now T-mobile uses 1900 GSM PCS band and AWS 1700 mHZ. There is another program I use to actually enable more bands. The program basically converts the selection of bands to a hexidecimal number to use in QPST software to program the added bands. Again, not sure if the Qualcom chip can use it. There is a WCDMA band selection for Bit (25) IV- US 1700 than could be programed to enable. I used a thread from the Sony Xperia forum to help me use the two programs.
rudyo78427 said:
Just wanted to give some info I found using QPST(qualcomm software) to see what cell bands are configured for our HTC One M8. I even looked at the Rezound bands as well. As most of you know, verizon didn't carrier lock our phones, so if we switch to global or even GSM network, we can use other carriers GSM SIM cards. Just need to properly configure the APN's of course. Below are the bands that the phone will search for when Global Network is selected. I pulled this configuration from my actual device. The Rezound only was missing Bit 19 & 49 selection, but everything else was selected:
[Bit_00] Band Class 0, A-System
[Bit_01] Band Class 0, B-System
[Bit_02] Band Class 1, all blocks
[Bit_07] GSM DCS 1800 band
[Bit_08] GSM Extended GSM (E-GSM) band
[Bit_09] GSM Primary GSM (P-GSM) band
[Bit_19] GSM 850 band
[Bit_21] GSM PCS 1900 band
[Bit_22] WCDMA Band I - EUROPE JAPAN & CHINA IMT 2100 band
[Bit_23] WCDMA Band II - US PCS 1900 band
[Bit_26] WCDMA Band V - US 850 band
[Bit_49] WCDMA Band VIII - EUROPE & JAPAN 900 band
Click to expand...
Click to collapse
I activated all other bands yet i still didn't get LTE, so i assume the restriction is somewhere within the chip perhaps.
band 3
regspy said:
I activated all other bands yet i still didn't get LTE, so i assume the restriction is somewhere within the chip perhaps.
Click to expand...
Click to collapse
hi
did you activate band3? 1800mhz and 2600mhz?
still dont get LTE in europe?
do you have a guide how to enable it?
thanks
boazlaz said:
hi
did you activate band3? 1800mhz and 2600mhz?
still dont get LTE in europe?
do you have a guide how to enable it?
thanks
Click to expand...
Click to collapse
Yes I enabled band 3 and 7 (1800,2600) following the guide posted here
unlock Qualcomm bands
So no euro lte at all yet?
Sent from my HTC6525LVW using XDA Free mobile app
BobbySteel said:
So no euro lte at all yet?
Sent from my HTC6525LVW using XDA Free mobile app
Click to expand...
Click to collapse
Nop, if someone can tell me which Rom has the change bands function then can try that as well. But even after opening the bands I'm only able to get H 14.4mbps.
Are you currently in Europe too? I'm dying to get Vodafone lte on this handset. 3g works fine but I haven't tried the qpst route yet.
BobbySteel said:
Are you currently in Europe too? I'm dying to get Vodafone lte on this handset. 3g works fine but I haven't tried the qpst route yet.
Click to expand...
Click to collapse
In UAE but we use the same LTE bands as Europe. You can try the qpst thing on stock Rom or cleanROM
regspy said:
In UAE but we use the same LTE bands as Europe. You can try the qpst thing on stock Rom or cleanROM
Click to expand...
Click to collapse
I have an old phone info app that's the 4636 menu thing. Hadn't tried this before but just tried assigning the bands there. Somehow that just hosed me and now I only get the 1900 band it seems, so phone is radio-less for me now
BobbySteel said:
I have an old phone info app that's the 4636 menu thing. Hadn't tried this before but just tried assigning the bands there. Somehow that just hosed me and now I only get the 1900 band it seems, so phone is radio-less for me now
Click to expand...
Click to collapse
There's a solution for this problem, if you are s-off-ed. I also did the same thing - i selected USA bands and my phone radio died. Just make a nandroid, flash ARHD , go to the same 4636 menu and it will give you another option in band selection - Auto!! Choose auto, then reboot and make sure you have connection with the network. Then restore from nandroid and you're good to go! I will try to find the link to the original thread!
EDIT: There it is: http://forum.xda-developers.com/showthread.php?t=2773907
If it helps you - thank the people in the original thread, i didn't find this solution, i'm just sharing the info!
vanshee said:
There's a solution for this problem, if you are s-off-ed. I also did the same thing - i selected USA bands and my phone radio died. Just make a nandroid, flash ARHD , go to the same 4636 menu and it will give you another option in band selection - Auto!! Choose auto, then reboot and make sure you have connection with the network. Then restore from nandroid and you're good to go! I will try to find the link to the original thread!
EDIT: There it is: http://forum.xda-developers.com/showthread.php?t=2773907
If it helps you - thank the people in the original thread, i didn't find this solution, i'm just sharing the info!
Click to expand...
Click to collapse
Thanks that was helpful! Somehow I also had recently loaded a Xposed app to show CPU speed on the top bar. I uninstalled that then after two reboots things came back. So odd, but I'm not complaining at this point.
after a google search it seems people have gotten into problems with chaning bands on verizon devices, the above solutions brings the radio back to life. But it certainly doesn't unlock LTE on europe bands.
So i guess its a lost cause, as it must be a hardware limitation
Yeah disappointing that we can't add those
Sent from my HTC6525LVW using XDA Free mobile app
I seem to be able to get Band 4 LTE sometimes on my Verizon M8 but how can we enable AWS HSPA+ bands?
How band 4 only sometimes?
BobbySteel said:
How band 4 only sometimes?
Click to expand...
Click to collapse
I guess my area has weak signal.. switches between LTE and 3g constantly.
Ok guys ive finally unlocked Band 3 and 7 (europe) LTE on Verizon HTC one m8.....
Here are the steps
Thanks to @olokos @BlackSoulxxx @fffft
Original thread for unlocking all bands
wow!
good job
was it hard? im afraid...
I am not able to connect to LTE Network in AT&T, I Have tried resetting the LTE settings and explored possible setups in Secret Menu. Still No luck.
If anyone has faced the similar issue, then please post the Step by step procedure, I have rooted and also flashed latest Stock ROM. Still no Luck.
if anyone has successfully connected to the LTE Network on AT&T using a custom ROM also, please let me know
Regards
John
I will owe you a beer if this can be cracked. :victory::highfive:
D838 does not have LTE Band 17 for AT&T only the F350 models have the correct 700Mhz support
coastalmikey said:
D838 does not have LTE Band 17 for AT&T only the F350 models have the correct 700Mhz support
Click to expand...
Click to collapse
is there anything at all that can be done?
I tried flashing the ROM and updating it to the Taiwanese edition,even though I'm able to see the band 17 in the hidden menu, I'm not able to choose it. When I try to choose Band 17 from the Hidden Menu, it displays a different band number.
Is there a way to get it to work?
John
According to pdadb.net, none of the F350 variants support NA 3G or LTE bands. The only G Pro 2 that support NA 3G and LTE bands is the D830. I can't find any retailers that sells it.
My F350L begs to differ. All F350x supports most North American HSPA and LTE band, with a notable exception of LTE band 4.
Here is a screen cap with Band 17 and phone model.
coastalmikey said:
Here is a screen cap with Band 17 and phone model.
Click to expand...
Click to collapse
Is there anything at all that coudl be done to get it compatible to band 17? Please help guys..Got tricked into buying this phone on craigslist..Spent a lot of money on it.
I brought back a Pro 2 F350L from Korea because it was listed in swappa as the Att device unlocked. I took it to T-Mobile put in a sim card which automatically chose the appropriate apns. I only get 3g no lte. I have scoured the web and these forums but cant find the info that tells me wether i got the wrong device for Tmo bands. I need help either configuring the correct bands or correct radio to flash or if this device won't or can't get lte on Tmo network. I am more than happy to reward the parties or person who helps me figure out this problem. If i have the wrong phone then so be it i will get the other model (that gets tmo lte) and unload this F350L. Thanks for any and all help.
In network mode, do you have GSM/WCDMA/LTA auto to select, or just GSM/WCDMA auto?
Service Menu:
Preferred Network Mode: gsm/wcdma/lte
dejop said:
In network mode, do you have GSM/WCDMA/LTA auto to select, or just GSM/WCDMA auto?
Click to expand...
Click to collapse
Yes:
Preferred Network Mode: gsm/wcdma/lte AUTO
I have found the bands for my F350L
LG G PRO 2 F350L
WCDMA- 2100/1900/850, GSM- 900/850/1800/1900 MHZ, LTE- 1/5/3/7/17
wiseguyy said:
I have found the bands for my F350L
LG G PRO 2 F350L
WCDMA- 2100/1900/850, GSM- 900/850/1800/1900 MHZ, LTE- 1/5/3/7/17
Click to expand...
Click to collapse
Looks like you have the wrong phone ... https://support.t-mobile.com/message/435224#435224
Bottom line, for optimal utility a T-Mobile phone needs to be:
1. Quad-band GSM
2. HSPA+ on at least band 2, band 4 & band 1 (2100) for roaming.
3. LTE on bands 1, 2, 4 & 12.
TSF14 said:
Looks like you have the wrong phone ... https://support.t-mobile.com/message/435224#435224
Bottom line, for optimal utility a T-Mobile phone needs to be:
1. Quad-band GSM
2. HSPA+ on at least band 2, band 4 & band 1 (2100) for roaming.
3. LTE on bands 1, 2, 4 & 12.
Click to expand...
Click to collapse
Thanks for all your help Ill post it up on Swapa this weekend.
TSF14 said:
Looks like you have the wrong phone ... https://support.t-mobile.com/message/435224#435224
Bottom line, for optimal utility a T-Mobile phone needs to be:
1. Quad-band GSM
2. HSPA+ on at least band 2, band 4 & band 1 (2100) for roaming.
3. LTE on bands 1, 2, 4 & 12.
Click to expand...
Click to collapse
So seeing the bands I posted would the phone work for ATT? Thats a huge question because it (350L) is posted on Swappa a a ATT phone? At least I can unload it there, LOL.
wiseguyy said:
So seeing the bands I posted would the phone work for ATT? Thats a huge question because it (350L) is posted on Swappa a a ATT phone? At least I can unload it there, LOL.
Click to expand...
Click to collapse
"AT&T 4G HSPA and HSPA+ use 850Mhz(Band 5) and 1900Mhz(Band 2) bands but it all depends on area if they own a license. LTE uses Band 17(700Mhz), Band 5(850Mhz), Band 2(1900Mhz), Band 4(1700/2100Mhz) currently."
https://forums.att.com/t5/Phone-Device-Upgrades/What-are-AT-amp-T-s-4G-LTE-bands/td-p/4067288
My F350S gets LTE on AT&T.
TSF14 said:
"AT&T 4G HSPA and HSPA+ use 850Mhz(Band 5) and 1900Mhz(Band 2) bands but it all depends on area if they own a license. LTE uses Band 17(700Mhz), Band 5(850Mhz), Band 2(1900Mhz), Band 4(1700/2100Mhz) currently."
https://forums.att.com/t5/Phone-Device-Upgrades/What-are-AT-amp-T-s-4G-LTE-bands/td-p/4067288
My F350S gets LTE on AT&T.
Click to expand...
Click to collapse
So the F350S works on ATT and here are Your Phones Bands (as listed here on XDA)
LG F350S
WCDMA - 2100/1900/850, GSM - 900/850/1800/1900 MHz, LTE - 1/5/3/7/17
So will these Bands work with T-Mobile? I really love this device and I am totally hooked on the 5.9 inch screens color so I am hoping your ATT Model (The one your using) will work on T-Mobile? If it does I am more than happy to send you a few duckets
TSF14 said:
Looks like you have the wrong phone ... https://support.t-mobile.com/message/435224#435224
Bottom line, for optimal utility a T-Mobile phone needs to be:
1. Quad-band GSM
2. HSPA+ on at least band 2, band 4 & band 1 (2100) for roaming.
3. LTE on bands 1, 2, 4 & 12.
Click to expand...
Click to collapse
So will this model and bands shown below work on T-Mobile and get roaming and LTE as well?
LG F350S
WCDMA - 2100/1900/850, GSM - 900/850/1800/1900 MHz, LTE - 1/5/3/7/17
So will these Bands work with T-Mobile? Again I am more than happy to send a few duckets $ for your help getting to the bottom of my queries!
wiseguyy, I believe the phone must have band 2 and/or 4 for it to utilize TMO's LTE service. From what I've read, band 1 is used only for roaming. Read the entire thread you quoted above.
12. Re: Refarm and 4G LTE - what are the final frequencies
tmo_sean_l
Citizen Magenta
tmo_sean_l Nov 29, 2014 12:54 PM (in response to memn1)
Great discussion everyone For the most up to date info regarding our network and devices memn1 you'll want to review these links: Setup guide to Bring Your Own Device (BYOD), http://support.t-mobile.com/community/coverage/blog and http://how-to.t-mobile.com/4g-lte/, and Newsroom | T-Mobile Newsroom
Hello,
I've got a LG Phoenix 2(K371) phone that I bought from Bestbuy and unlocked through AT&T
The phone is supposed to support the UMTS B1(2100 Mhz) frequency (as stated in specs).
I'm in North Africa right now for a business trip and unfortunately I wasn't able to get any 3G data with the local carrier that uses the UMTS 2100 Mhz frequency, I'm stuck with only 2G while my other phone works just fine.
I tried to change my Network Mode from 4G to 3G but the Network mode menu is missing!!!!!!
My questions are:
1- Does the K371 really supports the UMTS 2100 Mhz frequency ?
2- How can I change my Network mode from 4G/Lte to 3g/WCDMA?
Thanks
Did you ever get this sorted out? I am in Germany and can only get 2G also.
Same here in the UK! Only 2G.
My understanding is that either the official specifications of the phone are wrong - it doesn't support the HSDPA frequency of 2100 MHz, or (most likely) this frequency is disabled in the phone software settings since [email protected] doesn't use this frequency in the US. In any case it is very frustrating: I bought this phone convinced it is going to work while I am travelling in Europe, but obviously it doesn't as 2G data connection is useless.
Same problem in SE Asia. Phone doesn't have the right LTE bands but HSPC should work. Only getting 2G. No option in the hidden menu to change the modem RAT settings that I can see. *#546368#*371#
Anyone have any luck using the k371 overseas?
Same here...
I tried every single method I know in hopes that I could root the phone, but no luck!!!
I believe at&t disabled the said frequencies....
Our only bet is a proper root, and a custom rom..
any update on no UMTS 2100Mhz?
any solutoion on this issue?
I have found a solution. I am using it outside the US. I contacted my cellular provider, gave them the phone name (LG K371) and they sent me a text message with automatic settings for their data network. As soon as I opened it, I got a message like "data settings have been updated" and now it works on 3G and 4G without any issues. You may also be able to find these data configuration settings on your cell service provider's web site.
Seriously???
Please let me know is it AIRTEL service? since i am from INDIA.
we have the same problem in 2 mobiles..
Hmmm
I tried of calling and received setting for MMS , GPRS, INERNET but still i m seeing 2G symbol as E - edge detection
Please help me
Hi this is sainath
am also facing same problem, any one got solutions
please give reply.
tromal said:
Hello,
I've got a LG Phoenix 2(K371) phone that I bought from Bestbuy and unlocked through AT&T
The phone is supposed to support the UMTS B1(2100 Mhz) frequency (as stated in specs).
I'm in North Africa right now for a business trip and unfortunately I wasn't able to get any 3G data with the local carrier that uses the UMTS 2100 Mhz frequency, I'm stuck with only 2G while my other phone works just fine.
I tried to change my Network Mode from 4G to 3G but the Network mode menu is missing!!!!!!
My questions are:
1- Does the K371 really supports the UMTS 2100 Mhz frequency ?
2- How can I change my Network mode from 4G/Lte to 3g/WCDMA?
Thanks
Click to expand...
Click to collapse
Sorry for a late reply, but here's the real scoop about the LG K371 (AT&T)
First, being a "cheap" LG phone, there are very few bands actually included, and they only cover the main (not all) AT&T US frequencies, therefore it's no surprise that doesn't work on all overseas carriers. Again, they are covering only major US bands, and despite what it shows on the box or specs it may not be always true. B1 (2,100Mhz) band has different sub-bands, therefore it doesn't mean that the US B1 will work on an overseas B1, let alone the air-interface (2G/3G/4G/LTE) may not all be supported even if this sub-band exists.
Second, being that it's an AT&T phone, they are knows to load firmware with major restrictions for band selection called RAT Restrictions, which cannot be undone unless you can reflash it with a non-customized firmware, but you can't do that either due to the locked bootloader. A better option is to always go with the un-customized or Tmobile K7/K8 because they always have a lot more bands enabled than the AT&T version. Better yet, go with a Samsung which have more bands even on the AT&T models.
Bottom line, "cheap" phones along with AT&T restrictions will not work everywhere, despite the specs, and there's nothing you can do about it.
And my favorite old adage is "You get what you pay for!" LOL