Related
Hello,
I need to root a CAT b10 telephone. I tried using superuser program but it didn't work. I can't find any documentation for this phone in Internet.
Do you know a method to root this phone?
Thanks.
cabrerachaparro said:
Hello,
I need to root a CAT b10 telephone. I tried using superuser program but it didn't work. I can't find any documentation for this phone in Internet.
Do you know a method to root this phone?
Thanks.
Click to expand...
Click to collapse
You have to root this phone via RECOVERY. Use attached file and UPDATE FROM SDCARD.
Also you must not update (after recovery root) SUPERUSER app via android-market to newer version!!! If you'll do it, then it all comes broken. And you have to do it once again.
ninr said:
You have to root this phone via RECOVERY. Use attached file and UPDATE FROM SDCARD.
Also you must not update (after recovery root) SUPERUSER app via android-market to newer version!!! If you'll do it, then it all comes broken. And you have to do it once again.
Click to expand...
Click to collapse
Hi,
I followed the instructions but I'm getting Force Close message for superuser app. Even applying factory reset.
cabrerachaparro said:
Hi,
I followed the instructions but I'm getting Force Close message for superuser app. Even applying factory reset.
Click to expand...
Click to collapse
OK, that's no problem.
Attached package contains few another packages....(update.zip is the same like I uploaded here before)
1. Try to use "Superuser-3.1.3-arm-signed.zip" (this should be enough but I don't know why it isn't)
2. Reboot
3. Look at Superuser app
4. If Superuser app doesn't work then use "update.zip" once again
5. Reboot
6. Look at Superuser app
7. Now it should be working if not you can update Superuser app from market and try above procedure once again
Root this phone is really long term job. But never give up!! This phone is useless without root. I have been rooting this phone more then week.
Good luck and post if will you be successful.
just wondering since you have some experience with the phone.is there a custom rom for this phone or just the original one?
Hi guys android newbie here! My friend rooted my Nexus 5 and it was working fine for a couple of weeks. Yesterday I tried to open SuperSU and it didn't work! Other apps that required root didn't work either.
I have been looking around and it seems OTA updates may have screwed up my root. Every time I try to open SuperSU it says: "There is no SU binary installed, and SuperSU cannot install it. This is a problem!" If you just upgraded to Android 4.3 (I have 4.4), you need to manual re-root. Consult the relevant forums for your device!" I have used root checker by joeykrim and it says "Sorry! this device does not have proper root access" (to confirm my root is busted).
My question is, is there any way to fix this without re-rooting? If I have to re-root, can I just directly re-root it again using something like Wugs rootkit?
Thank you very much in advance!
Just flash the newest version of supersu and you'll be good to go..... http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip
go to the play store, find supersu, install/update it, open tbe app and update your binaries.
simms22 said:
go to the play store, find supersu, install/update it, open tbe app and update your binaries.
Click to expand...
Click to collapse
I've tried to insyall /uninstall, wiping the cache and data with no luck. Right when I open the app the supersu binary problem comes up and I can't even get into it!
seyba said:
I've tried to insyall /uninstall, wiping the cache and data with no luck. Right when I open the app the supersu binary problem comes up and I can't even get into it!
Click to expand...
Click to collapse
cant even get into it?
Yea it says there is no SU binary installed. I think I've lost root access
seyba said:
Yea it says there is no SU binary installed. I think I've lost root access
Click to expand...
Click to collapse
flash this with your custom recovery, its the latest supersu http://download.chainfire.eu/supersu
bodooo said:
Just flash the newest version of supersu and you'll be good to go.....
Click to expand...
Click to collapse
I can install/update to v1.8! I just can't open it. Gives me a "SU binary not installed" when I do!
Did you install/update from the playstore or flashed the new update?
simms22 said:
flash this with your custom recovery, its the latest supersu
Click to expand...
Click to collapse
Sorry if this is a stupid question .. but how/ do I flash this or what program do i use?
My friend helped me root it so i have no idea on how to do this @@ Very sorry.
Hmmm... from the link I posted in one of my last post, you can just use a useful app called "flashify" and flash it that way (the easiest way) but you need that file that is in the link obviously to do so haha. So afterwards when in flashify you'll get 3 simple options, boot image, recovery image, and zip file. choose zip file, go into your downloads folder from the file explorer from the app (which it should be there if you downloaded it off your phone) and let the app do the rest
bodooo said:
Hmmm... from the link I posted in one of my last post, you can just use a useful app called "flashify" and flash it that way (the easiest way) but you need that file that is in the link obviously to do so haha. So afterwards when in flashify you'll get 3 simple options, boot image, recovery image, and zip file. choose zip file, go into your downloads folder from the file explorer from the app (which it should be there if you downloaded it off your phone) and let the app do the rest
Click to expand...
Click to collapse
Ok so I can't open flashify either. It also says I have lost root access and my superuser is busted. I have attached a screenshot!
http://i42.tinypic.com/2mgw0v6.png
Of course, you don't have root access, silly me lol Well guess we'll have to do it the hard way (it's not really that complicated) ok read carefully. Power off your phone, afterward hold the power and volume down buttons which should get you into the bootloader, cycle trough the options with the volume buttons and when you see recovery mode select it with the power button, now depending on which Recovery you have you'll have to choose the option that says install or install from sd card, again, depending on which one you have this will be slightly different. After doing i believe the paths will be the same, chose 0/ then look for the download/ folder which you should have that supersu.zip file, if you're using twrp recover it should be touch screen and you simply select it and swipe to install, if you're using cwm (which i do) you'' have to scroll with the volume buttons and select the file with the power button to install. I hope I was as clear as i could be, good luck
after going into recovery mode, there is just a android robot with his chest open and an exclamation mark! can't proceed after that.
Ouhhh you don't have a recovery then, do you have adb or any kind of toolkit?
I have wugs toolkit. but every time i try to do anything at all on it. It says ADB device not found? That seems to be preventing me from doing anything as well.
Do you have the adb drivers installed or/and usb debug turned on in developer settings?
how/where do i install adb drivers? I have not done so, and i doubt my friend did it when he rooted.
I do turn on usb debugging when i tried to unroot/root on wugs toolkit
In wugs toolkit it has a walk-through on how to do so, i suggest you use the RAW drivers option
I must be blind to not have seen this before. Thank you very much for your help I'll let you know how it goes!
Hello guys, I open a Question and Answer Thread for all SuperMan Rom users, so even users under 10 posts can ask their questions here.
Below I added some basic Q&A stuff which can also be found at the main thread, if you have any question, read through them before posting, thanks!
In case you search for the changelog have a look: Changelog post
If you want to see my post with all useful links such as TWRP, magisk, xposed and more visit: useful post​
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader and modem. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G930F/FD/K/L/S/W8. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 820 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Q: Performance and battery is very poor even after clean install. What should I do now?
A: I assume you installed Xposed than, some modules can cause batterydrain and performance problems. So try to make a clean install of the rom WITHOUT xposed installed.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from superman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore SuperMan control settings after a clean base update, why?
A: Backup for SuperMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in SuperMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
Q: I enabled weather on lockscreen but I can't see anything...
A: You probably didn't setup or even installed samsungs weather widget. Without it weather on lockscreen won't work too. So reflash the rom with the widget installed this time and set it up.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Normally we can use the stock kernel to encrypt our device, but since the Android 7.0 Nougat update samsung makes a check kernel sides to block deodexed roms from booting. This means that even the stock kernel is build by me to disable knox and tima. So encryption won't work there and you have to encrypt your device after you set up your phone. After that go to settings, security, encrypt device. It may need some additional steps to work...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: No it does not! You will end up in a bootloop when you flash it on android N
Q: I selected xposed but now I don't see an app for it?
A: Maybe there went something wrong with installing the app to /data/app from my installer script. But xposed is actually installed only the app is missing, so head over to the download page of xposed app: Material Xposed Thread
Q: I selected xposed but the app shows not active or something else with xposed is not working.
A: This can have 2 reasons:
1. You have installed latest xposed version without installing magisk, magisk is required for most recent xposed version!
2. You used 86.2 xposed (which does not need magisk) but you did not install supersu. Since 86.2 does not use magisk to be systemless it uses supersu instead!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent 2.4.3 SuperStock Kernel
3. Flash Magisk V12
4. install latest Magisk Manager from playstore
5. Open Magiks Manager, go to settings
6. Enable MagiskHide, systemless hosts and systemless busybox
7. Reboot the phone and check safetynet!
Q: I got out of date binary issue?
A: Since Magisk V11.1 there is no need for phh root anymore. Everything is handled inside the MagiskManager apk!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: Even when I did not use xposed during my setup in rom I can't login to snapchat anymore!
A: Snapchat got updated and now detects even root access on your phone!
Q: What to do to login to snapchat then?
A: Clean install the rom without root and xposed and login to your snapchat, save the app with titanium backup, flash back xposed and root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Q: I want to discuss this problem a bit deeper. Should I do so?
A: Do that, but this has nothing to do with this rom, so please go ahead and post your experience here on this Snapchat Thread.
Questions about Kernels:
Q: I want to switch kernel, how?
A: Since we have systemless xposed and systemless supersu, we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: Synapse shows no UCI support!
A: Most comon issue is that no busybox is installed. Download the one from here: Latest busybox and flash it in recovery.
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Q: My screen is kind of yellow/orange and the touchscreen doesn't work at all!
A: You have chosen the wrong kernel in aroma selection. Reflash the rom without any wipe selecting the right kernel version.
Questions about Root:
Q: I lost root after installing this rom. What to do?
A: All mods (like supersu, phh's root, xposed and magisk) are stored in ramdisk of kernel boot.img. So if you flash this rom, and after this another kernel, simply reflash your preferred root method and it will work again!
Q: I selected phh root but my phone tells me I am not rooted!!
A: There are two possibilities:
1. You have mixed supersu/phh with magisk.
2. You did not install phhs root app from playstore.
Q: I get a warning about binary out of date. Help!
A: That happens on latest Magisk V11.1. Reason: Root has fully moved into Magisk Manager, no additional app required. Uninstall phh or supersu apps and only use magisk!
Q: I want to use su hide on my phone, how to do so?
A: Both below variants are outdated, I recommend to use Magisk with its build in MagiskHide. Check the thread: Magisk Thread
Link to phh's hidesu: Phh's thread
Link to chainfires suhide: Chainfires thread
Hi,
I have a bit of a silly question. I have enabled the torch to be turned on by the volume button but now want to turn that function off and can't remember where i enabled it from. I have looked everywhere but can't find it. Are you able to point me in the right direction.
Many thanks.
reeves72 said:
Hi,
I have a bit of a silly question. I have enabled the torch to be turned on by the volume button but now want to turn that function off and can't remember where i enabled it from. I have looked everywhere but can't find it. Are you able to point me in the right direction.
Many thanks.
Click to expand...
Click to collapse
Hello
Settings, display, torchlight
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Hello
Settings, display, torchlight
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
Thanks that was driving me crazy.
downloadable files verification
Can some one verify that all of the downloadable files on the OP are the correct ones?
Can't seem to get it working, the steps I follow, are as following.
-> flash to stock rom from sammobile
-> OEM unlock
-> flash latest TWRP
-> in TWRP, format data
->install latest BL and CP from OP
-> flash rom -> Clean install
result is a non booting superman rom.. What can I do? I have been trying for DAYS now...
grave-diggers said:
Can some one verify that all of the downloadable files on the OP are the correct ones?
Can't seem to get it working, the steps I follow, are as following.
-> flash to stock rom from sammobile
-> OEM unlock
-> flash latest TWRP
-> in TWRP, format data
->install latest BL and CP from OP
-> flash rom -> Clean install
result is a non booting superman rom.. What can I do? I have been trying for DAYS now...
Click to expand...
Click to collapse
There are several reasons:
1. Encryption is still enabled
2. BL/CP was not successfull
3. You mixed your settings about G930F or G935F model
I noticed a few things in aroma log when it was installing
failure to boot.img extracting ramdisk failure, aborting, is this something that's causing the problem?
I am still not getting it right..
grave-diggers said:
I noticed a few things in aroma log when it was installing
failure to boot.img extracting ramdisk failure, aborting, is this something that's causing the problem?
I am still not getting it right..
Click to expand...
Click to collapse
Thats not really good lol. Redownload the rom. Maybe you got a corrupt zip file
Sent from my SuperMan powered SM-G930F
Holy crap I got it to work.. 4 days of trying to get this to work made me get alot of knowledge about this stuff, the file was corrupt, redownloading the file worked.
grave-diggers said:
Holy crap I got it to work.. 4 days of trying to get this to work made me get alot of knowledge about this stuff, the file was corrupt, redownloading the file worked.
Click to expand...
Click to collapse
Finally!
Sent from my SuperMan powered SM-G930F
Right at this point I am wondering why snapchat doesn't want to log me in. There's no xposed or snapprefs on my phone, exposed uninstaller was flashed. Does this come familliar? There has to be a workaround without having to use bluestacks right?
grave-diggers said:
Right at this point I am wondering why snapchat doesn't want to log me in. There's no xposed or snapprefs on my phone, exposed uninstaller was flashed. Does this come familliar? There has to be a workaround without having to use bluestacks right?
Click to expand...
Click to collapse
Someone said that it even checks for root now
Okay, here's the solution. If you find yourself having trouble logging in in to snapchat on a rooted device without xposed framework installed. Make sure to search for xposed using root explorer, delete all system files manually.. For some reason xposed uninstaller did not completely remove every xposed file in my phone.
SM-G930L
Does this ROM works on Korean variant? SM-G930L is the model. Thanks in advance
genorazer said:
Does this ROM works on Korean variant? SM-G930L is the model. Thanks in advance
Click to expand...
Click to collapse
Make a full backup and try
Sent from my SuperMan powered SM-G930F
Im on fully stocked g930fd
Can u confirmed is this the correct sequence
Root
Install twrp
Make a back up
Make a clean flash
Install superman rom
tatuboy said:
Im on fully stocked g930fd
Can u confirmed is this the correct sequence
Root
Install twrp
Make a back up
Make a clean flash
Install superman rom
Click to expand...
Click to collapse
No need to flash root. Flash twrp, flash bl and cp? backup, wipe (remove encryption) flash rom.
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
No need to flash root. Flash twrp, flash bl and cp? backup, wipe (remove encryption) flash rom.
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
Can u link to me the needed files?
If it have video tutorial much better..
Im from oneplus3 users before.
So i dont have much knowlege in s7.
I need to know
First how to flash TWRP?
2ND What is bl? U mean boot loader?
Cp? What does it mean for?
Then after i back up. And wipe.
How to remove encryption?
tatuboy said:
Can u link to me the needed files?
If it have video tutorial much better..
Im from oneplus3 users before.
So i dont have much knowlege in s7.
I need to know
First how to flash TWRP?
2ND What is bl? U mean boot loader?
Cp? What does it mean for?
Then after i back up. And wipe.
How to remove encryption?
Click to expand...
Click to collapse
Okay you want to install this rom. So go to my main page and follow all android beginner steps. Very detailed guide there
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Make a full backup and try
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
is there a chance it could brick the phone?
I hired someone not super familiar with flashing a custom rom, but who knew more than me. We got MM installed but I am having some problems. First, the only reason, I updated the rom was to get mirroring. However: 1. there is no mirroring, but there is cast. I have a Tab 4 and mirroring works perfectly with it and KitKat. I tried about 5 mirroring apps from the Play Store and they all require that the Smart TVs I have (Samsung and LG) be connected to the Internet because using the TV's internet connection is a major nuisance for me. That is not required with my KK Mirroring, and I am wondering whether I should get rid of MM and flash KK. Or, is there an app that will work without mirroring. 2. My SD card is now invisible. When I link my Tab to my windows 7 computer, my SD card doesn't show. (Additionally, come to think of it, none of my files show. All I get is an image of 5100, but when I click on it nothing shows on my windows 7 computer.) 3. Probably related to No. 2 -- Some apps seem to install, but I have no way to access them because no shortcut is placed on the screen and I have no tree of files. (Titanium Backup for instance, can't be accessed. However, when I downloaded ai-keyboard, it mostly worked)
Hate to ask so many questions, but this is what I now have. Would call the person who did the flash, but his wife is due any day, and for all I know, gave birth yesterday.
which M Rom did you installed? kindly mention Rom and recovery build number as well.
are you using any other home launcher than the default? how did you installed titanium backup? normal or copy pasted apk to the system partition?
have you checked the luncher setting? for instance I can hide some apps from the nova launcher but can find it with it's search bar.
check with the default launcher or any other.
did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?
I haven't tested screen mirroring with this device. although I checked briefly with a Samsung S, S4 and a G3 on a LG smart tv with webOS 3 using LG TV plus app, I had to be on a same network with wifi hotspot enabled from my device (didn't required a working internet) and selecting LG tv plus option from the TV.
I still haven't been used to with screen mirroring and cast. so others can help.
Hi Billys,
Thanks a lot for your response. My Internet has been down for about 2.5 days and that is the reason I am late responding to you. The CM version was 13.0.20160222-2140-UNOFFICIAL -P5110. The CM Recovery Version was GT-P5113 CM Recovery 6.0.1.0.tar.
The Launcher is the default that comes with MM. I installed Titanium Backup through the Google Play Store. I have been fooling around with the device and Root checker basic says that root access is not properly installed, which might explain why Titanium Backup is not working. Also, SuperSu won't open.
You asked me: "did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?" Don't understand the questions, particularly the second one. If you could be more explicit maybe I could answer the question. Thanks again for your help.
decijp said:
Hi Billys,
Thanks a lot for your response. My Internet has been down for about 2.5 days and that is the reason I am late responding to you. The CM version was 13.0.20160222-2140-UNOFFICIAL -P5110. The CM Recovery Version was GT-P5113 CM Recovery 6.0.1.0.tar.
The Launcher is the default that comes with MM. I installed Titanium Backup through the Google Play Store. I have been fooling around with the device and Root checker basic says that root access is not properly installed, which might explain why Titanium Backup is not working. Also, SuperSu won't open.
You asked me: "did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?" Don't understand the questions, particularly the second one. If you could be more explicit maybe I could answer the question. Thanks again for your help.
Click to expand...
Click to collapse
Device specific builds are too outdated. Kindly flash these depending on your model
Espresso3g - P3100 & P5100
EspressoWifi - P3113, P5113, P3110, P5110
For more info, visit this thread http://forum.xda-developers.com/gal...fied/rom-cyanogenmod-13-cm13-0-t3303798/page1
And flash it with the latest TWRP recovery found on andi34.github.io under recoveries
Sent from my espresso3g using XDA Labs
Root is enabled through developer options. Go settings, about tablet. Tab build number 7 times. Back out and open dev options. Scroll down a bit and enable roo & adb. You should be good to roll then
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Champ1919,
I did what you suggested and was able to download TWRP from Andi's. I unzipped the file with the ES File Explorer. Nothing happened. Could you tell me what I should do next. Thanks again.
decijp said:
Champ1919,
I did what you suggested and was able to download TWRP from Andi's. I unzipped the file with the ES File Explorer. Nothing happened. Could you tell me what I should do next. Thanks again.
Click to expand...
Click to collapse
if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery.
decijp said:
Hi Billys,
You asked me: "did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?" Don't understand the questions, particularly the second one. If you could be more explicit maybe I could answer the question. Thanks again for your help.
Click to expand...
Click to collapse
when you connect the tab to PC, there is a logo of CM in the status bar, drag the notification menu, and tap the CM menu, there, check If MTP is enabled or it's set on charging only mode. you can also set this in setting-developer. make sure the keypad is not locked as well
billysam said:
when you connect the tab to PC, there is a logo of CM in the status bar, drag the notification menu, and tap the CM menu, there, check If MTP is enabled or it's set on charging only mode. you can also set this in setting-developer. make sure the keypad is not locked as well
Click to expand...
Click to collapse
Billys,
There was no CM logo, but went to settings and USB and you were right. Now I can view the files of my tablet on my PC. Thanks a lot.
Smart-T "if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery. "
I did the recovery boot, and it shows CWM v. 6.0.1.0. It also shows install zip from sd card. However, I have multiple zips on my sd card. How can I be sure that it is installing the right zip? Will it automatically grab the right zip file.?
decijp said:
Smart-T "if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery. "
I did the recovery boot, and it shows CWM v. 6.0.1.0. It also shows install zip from sd card. However, I have multiple zips on my sd card. How can I be sure that it is installing the right zip? Will it automatically grab the right zip file.?
Click to expand...
Click to collapse
It won't automatically get the zip file because you select the zip you flash. Just navigate to whet you put the zip and flash that
Sent from my espresso3g using XDA Labs
decijp said:
Smart-T "if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery. "
I did the recovery boot, and it shows CWM v. 6.0.1.0. It also shows install zip from sd card. However, I have multiple zips on my sd card. How can I be sure that it is installing the right zip? Will it automatically grab the right zip file.?
Click to expand...
Click to collapse
install the latest twrp by using cwm. after install reboot back into recovery. you shuold see the graphical differences between twrp and cwm.
To make a long story short, it appears that my Superuser is misbehaving. Used root checker to analyze and it found that Superuser was installed and that SU Binary files were installed. However, it found a Root User Account Error. (Error: stderr: null, stdout: null, exit..value: 1) It suggested that I reinstall Superuser app from TWRP. .
After much experimentation, I can get into TWRP when I reboot in the recovery mode. (not when I hit the icon on home page -- tells me I need root access) When I hit install, I see CWM 13, An android 4.4 (omni-4-4-4-20160305-1323 expresso-HOMEMADE.zip) and a gapp 6 --- a long time ago when I downloaded 4.4, I didn't know how to get to the corresponding gapp, so I didn't do so. Also, SuperUser doesn't show up at this place, so I don't know how to reinstall it.
Can anyone tell me how to reinstall Superuser and get full SuperUser access?
Also, I am thinking of going back to Android 4.4 to get mirroring. Can someone point me to the gapp file for that. Additionally, when I possibly would be installing 4.4, would I first install 4.4 and then reboot and install gapps. Or should 4.4 and gapps be installed at the same time?
Thanks for everyone's help. Sorry to ask so many questions. However, have gone to youtube and web many times and still am confused about what is going on.
decijp said:
To make a long story short, it appears that my Superuser is misbehaving. Used root checker to analyze and it found that Superuser was installed and that SU Binary files were installed. However, it found a Root User Account Error. (Error: stderr: null, stdout: null, exit..value: 1) It suggested that I reinstall Superuser app from TWRP. .
After much experimentation, I can get into TWRP when I reboot in the recovery mode. (not when I hit the icon on home page -- tells me I need root access) When I hit install, I see CWM 13, An android 4.4 (omni-4-4-4-20160305-1323 expresso-HOMEMADE.zip) and a gapp 6 --- a long time ago when I downloaded 4.4, I didn't know how to get to the corresponding gapp, so I didn't do so. Also, SuperUser doesn't show up at this place, so I don't know how to reinstall it.
Can anyone tell me how to reinstall Superuser and get full SuperUser access?
Also, I am thinking of going back to Android 4.4 to get mirroring. Can someone point me to the gapp file for that. Additionally, when I possibly would be installing 4.4, would I first install 4.4 and then reboot and install gapps. Or should 4.4 and gapps be installed at the same time?
Thanks for everyone's help. Sorry to ask so many questions. However, have gone to youtube and web many times and still am confused about what is going on.
Click to expand...
Click to collapse
If you installed CM13, is actually pre rooted. Just enable it from the developer settings
Sent from my espresso3g using XDA Labs
Finally figured out that I could transfer SuperSu zip file to my Tab and then install it from TWRP. Did so and also wiped clean the cache and now SuperSu is functional and I can get rid of the bloatware and speed up the Tab. Thanks for everyone's help.
Hey guys,So um i am using redmi note 10 miui 12.5.3 global and i pulled the stock miui camera and gallery apk using adb pull commands. I plan to install pixel experience custom rom. How would i install these in that rom?
Would require this custom ROM gets rooted, phone's bootloader gets permanently unlocked, phone's Android's AVB permanently gets disabled, as also phone's Android's SELinux permanently gets disabled.
can i find links for tutorial on how to do this?
and even if I managed to do all these,what do i do after that? would the apk install just like that?
ahmed6392 said:
and even if I managed to do all these,what do i do after that? would the apk install just like that?
Click to expand...
Click to collapse
If the APKs are of type
system-app
then you've to mount device's /system partition
user-app
then you've to mount device's /data partition
as RW before installing the APKs.
i've done the three steps. i didnt understand the last thing.How do i install the apks? do i need a seperate installer or a custom recovery? could you please explain and the apks are of system-app
You simply install them by means of ADB
Code:
adb devices
adb install <LOCATION-OF-APK-FILE-ON-PC-HERE>