Database Info

[Q] Noob Help :/

Ok here are step by step how i working in Virtuous ten Stuido and i get error :/ i use (Bruce2728 ROM 11/2) i want to change LatinIME.apk (Keyboard to THIS)
Ok here's steps
1. Open cm-10-20121102-bruce2728-pyramid and put on desktop frameworks-res.apk (Framework), LatinIME.apk (Application Keyboard)
2. Then i put frameworks-res.apk to C:\Documents and Settings\Anonymous26\apktool\framework where apk should be
3. Open Virtuous ten studio and click on new project:
Project: Apk - project
Apk - Tool: Framework tag - ramework-res
Smali: API level ( 4.1 Jelly Bean )
Import: Here i select location of LatinIME.apk (Desktop)
Then i press ok and start decompiling when decompiling over ( 6 mins ) then:
4. I select Styles from (Pic here)
5. Then i edit ( <item name="keyHintLetterColor">#8000000</item> ) from 262 line to <item name="keyHintLetterColor">#80E0E4E5</item>
6. Then i save this change and pres button build all
7. Wait till recompile/sing this edit apk
8. Then i run cmd and this recompiled/singed file add where i have adb files
9. Type cd c:\ Location of ADB
10. adb root
11. adb push LatinIME.apk /system/app/LatinIME.apk
12. abd reboot
And then this error when all is over :/ CLICK
Anyone help ? :/

XporteR21 said:
Ok here are step by step how i working in Virtuous ten Stuido and i get error :/ i use (Bruce2728 ROM 11/2) i want to change LatinIME.apk (Keyboard to THIS)
Ok here's steps
1. Open cm-10-20121102-bruce2728-pyramid and put on desktop frameworks-res.apk (Framework), LatinIME.apk (Application Keyboard)
2. Then i put frameworks-res.apk to C:\Documents and Settings\Anonymous26\apktool\framework where apk should be
3. Open Virtuous ten studio and click on new project:
Project: Apk - project
Apk - Tool: Framework tag - ramework-res
Smali: API level ( 4.1 Jelly Bean )
Import: Here i select location of LatinIME.apk (Desktop)
Then i press ok and start decompiling when decompiling over ( 6 mins ) then:
4. I select Styles from (Pic here)
5. Then i edit ( <item name="keyHintLetterColor">#8000000</item> ) from 262 line to <item name="keyHintLetterColor">#80E0E4E5</item>
6. Then i save this change and pres button build all
7. Wait till recompile/sing this edit apk
8. Then i run cmd and this recompiled/singed file add where i have adb files
9. Type cd c:\ Location of ADB
10. adb root
11. adb push LatinIME.apk /system/app/LatinIME.apk
12. abd reboot
And then this error when all is over :/ CLICK
Anyone help ? :/
Click to expand...
Click to collapse
Hi,
Since you are now using VTS,perhaps you should post there as well.
Look HERE

No secsess :/

[GUIDE]( Easiest) All about ADB, logcat, shell

ADB:-
Android Debug Bridge
Very useful program made itself by Google for Programmers and developers. Its based on command line and basically communicates with your Android to respond to certain commands. There is vast amount of knowledge about adb but its most useful commands limit to getting:-
Logcat:-
A real time log of what is happening in background of our devices. It is really useful for developers to see which component has malfunctioned and helps to narrow down their search for what failed and what needs to be fixed. Several times users are asked to give logcats of their devices which are giving errors. We will go in detail that how to get logcats in every and easiest way possible.
App Installation and Management:-
adb proves really handy if you want to install apks directly from your PC or want to batch install or delete them.
Shell Execution:-
You must have heard of Terminal Emulator. It is an app for android to execute shell commands(linux commands) which are basically present as applets in /system/bin, /system/sbin or /system/xbin(in our case) folders. A very imporant applet called busybox is installed there mainly used for execution of basic commands during root browsing or ROM installation. Many times updater script of ROMs use busybox commands to install it. Well, these commands can be initiated from your device too but they can be initiated from adb also making it easy for programmers.
Pushing and Pulling:-
Most used commands of adb. adb makes it a piece of cake for new device developers to get an ideo of structure and basic knowledge of devices by pulling command. We can pull out i.e copy any files or folders from our devices to our PC, even the root directories without rooting the devices. It help rooters and ROM chefs of new devices to get an idea and implement their mods on them. Pushing is also very useful command. It copies your files and folders from PC to your device. Very useful in pushing some /system apps and other things
Remounting and setting permissions
Basic commands:-
Of-course basic commands such as reooting and rebooting in recovery ode and download mode are supported.
Others:-
There are several other features of adb such as fastboot, aapt, etc
Setting up ADB
Pre Requirements:-
A little amount of brain
PC(This is a windows guide, if asked I will add linux and mac guide later)
Java Runtime environment or Java Developing kit
Your Device Drivers
An Android Device
Assuming you all these ready and working properly, we continue
If you are having trouble completing Pre-Requisites, there are several guides featuring them too
Start
1. First Download Android SDK. Roughly about 70 MB
2. There may be any compressed zip file or exe file
If zip file, then extract it to C:\android-sdk
If exe file then double click on it and install it in C:\ Drive(or any other drive you want)
3. Now to get adb and other tools, you need to download 'Platform Tools'
To download them, go to the android-sdk folder and double click on SDK Manager
It will ask you which package to download? However, it is your choice which package to Download, but here, we will only talk about platform
Tools. So, simply tick on Platform Tools and click on install. Once you have done it. Go to the platform-tools folder in the directory where you installed android-sdk. You will find several files there like adb, fastboot, aapt, etc
4. Now, you can backup the whole folder of android-sdk to any external storage that will make you not download package
again if you want to. You can have it placed in any computer and run it as it does not require registry to work
5. Now, you are just one step away from using adb. Next step is SKIPPING SETTING ENVIRONMENT VARIABLE
Many guides on internet say that it is to be done for making it easy for users and if you have some basic knowledge of Command Prompt,
you will know that to execute any application with command prompt, you first need to change the directory to the one where application is
placed. And to skip changing the directories every time you open CMD, you need to put that application is environment variable. Howeve, we will not do so.
6. Type cmd in the search bar. Copy cmd.exe from there. Go to the directory where you have installed android-sdk. Go to platform-tools folder. Paste cmd there, right click on it and in the settings, select Run as Administrator.
7. You are done. Now what to do in it?
ADB Commands
Type adb in command prompt. And several commands will show up on your screen. It is very difficult to analyse these all commands, so we will only talk about most used and important commands
Connect your device via USB cable
And open the CMD in platform-tools folder(Make a shortcut of it on desktop). And type the suitable commands
Code:
adb devices
Will show the list of devices attached to the PC andtheir serial numbers. If this shows up correctly on your PC, then it means that everything is fine for continuing.
Logcat
Code:
adb logcat
It will display the real time log of your device
Best time to do it is when your device boots up
Now, many users ask me how to copy the logcat and upload it from CMD
There are several methods:-
1. Right click on the Title Bar of Command Prompt. Hover the cursor over edit and select mark. Select all the things you want to copy and then click enter. All the things will be copied to clipboard.
2. This is the correct way of getting logcat saved.
Code:
adb logcat > logcat.txt
This command will create a logcat.txt document in platform-tools folder with the complete logcat of the device. Ofcourse you can type any name instead of logcat.txt
3. I prefer taking logcat this way as it neatly compiles logs of different time
Code:
adb logcat -v long > logcat.txt
This is a very nice way to get logcat.
Installing Apps
Code:
adb install %PATH OF APK%
This will install an app on your Android
For example, if my app AreeB.apk is in G:\ drive (G:\AreeB.apk)
Then I will type
Code:
adb install G:\AreeB.apk
Be sure your apk is not in a folder that has space in its name, else the command will break at space bar.
For eg:-
G:\Program Files\AreeB.apk
Mounting
However, I never found any problem in tweaking with system files with adb, but some users said that they couldn't do it, so the problem was that their system partition was mounted as Read Only(R/O)
So, it is necessary now to tell how to mount system partition as Read Write(R/W)
Code:
adb remount
It is easiest way to do so, if it does not work then
There is another method that we will discuss in ADB Shell commands section
Pushing and Pulling
For pushing,
Type
Code:
adb push %PATH TO BE PUSHED% %PATH WHERE TO BE PUSHED%
Suppose I have an app named SystemUI.apk(PATH = G:\SystemUI.apk) which I want to push in /system/app/ on my android(or in other words, install an app as a system app). Then I would type
Code:
adb push G:\SystemUI.apk /system/app/
More examples
G:\Dance.txt file to be pushed in Dance folder in sdcard
Code:
adb push G:\Dance.txt /sdcard/Dance/
OR
Code:
adb push G:\Dance.txt /mnt/sdcard/Dance/
G:\Movies folder to be transferred in SDCARD in Videos Folder
Code:
adb push G:\Movies /sdcard/Videos/
G:\system\framework\framework-res.apk to be pushed in /system/framework/
Code:
adb push G:\system\framework\framework-res.apk /system/framework/
For pulling,
push command replaces with pull and paths are swapped
Code:
adb pull %PATH TO BE PULLED FROM% %PATH TO PLACE PULLED FILE%
Example,
All system apps are to be pulled to G:\ROM\system\app
Code:
adb pull /system/app G:\ROM\system\app\
build.prop to be extracted to desktop
Code:
adb pull /system/build.prop C:\Users\Areeb\Desktop\
However, if a folder is in platform-tools folder, you don't need to type full path
Suppose if I type
Code:
adb pull /system/ system
Then a folder named system will be created inside platform-tools with all the files in system in it
If a file is in platform-tools folder, then also no need to type full path
For example,
There is an app name DeskClock.apk in this folder then, to push it to /system/app, type
Code:
adb push DeskClock.apk /system/app/
ADB Shell Commands
This mode of adb allows you to execute linux shell commands from your PC
These commands can aldo be executed through the mobile using Terminal Emulator
To initiate shell mode
Type
Code:
adb shell
You will get an prompt like this
sh-3.2#
Now you are in shell mode
adb commands won't work here and a new set of commands will work here. But we will only go in a little detail here.
Assuming you are in adb shell mode, I will only type commands that will work on shell. Note:- These commands won't work if you type them alone on cmd. But, these command will directly work on your mobile's Terminal Emulator
As these commands can also work on mobile, I am going to tell you a way of taking logcat on mobile
Type
Code:
logcat
You will see log of your device
To save this
Type
Code:
logcat > /sdcard/log.txt
A file named log.txt will be generated in sdcard
Uninstalling Applications
Code:
cd /data/app
This will change the directory to /data/app
Code:
ls
This will show the list of files in there
Suppose, there is an app named com.opera.browser (Opera Mobile) you want to uninstall it
Type
Code:
rm -r com.opera.browser
This will uninstall the app
Mounting Command:-
Code:
mount -o rw,remount /dev/block/mtdblock3 /system
Miscellanous commands:-
su: Initiates root request
du: Shows file foldrs and size
date: Shows todays date
Forgot next ones, will write later
Credits
Google: For Android and several searchings
Samsung: For Galaxy Ace s5830I
Broadcom: For their Open Sourceness
XDA Forums : For the precious knowledge
My Uncle: For gifting me this Phone
My Teachers: For teaching me English(I would not be here without them)
You: For future Thanks
Till now, thats it, will add some more things later
If any problem, I will add it too
Suggestion? They are welcome

[GUIDE] Remove Blocking Mode notification (root/deodexed Samsung ROM required)

Hi Guys
As the Title says
Credits goes to exscape
Hope to bring you guys my rom soon to I9500
ORIGINAL LINK
Requirements:
* DEODEXED AND ROOTED Samsung Jelly Bean ROM (I use WanamLite XXDLIH v3.9, google it - I can't post the link)
* 7-zip (google it)
* Galaxy S III - not sure if other models than the i9300 will work, my guess is that they will. I can't test on other phones than my own, though, so you're on your own in that case! Also no idea if Note models will work, I've never used one.
* A Windows computer - unless the tools are available for other platforms.
* Java -- if you can do Start -> Run -> "java" -> OK without an error, you should be fine.
* A bit of patience
As always, this is on your own risk!
Steps to hack:
0) BACK UP YOUR PHONE! My suggestion would be to take a nandroid backup before getting started.
1) Get an apktool that works with JB APKs.
Here's the one I use (assemble the link): mediafire . com / ?ufzdylekbkloffy
(Sorry for doing that, but surely posting guides constitutes making helpful contributions? )
The ZIP contains two apktool versions, one for decoding and one for building.
Thing is, I'm not 100% sure on where I got the apktool JARs. I think one of them is the unmodified 1.4.2 JAR, and one is modified to work with ICS (and newer) APKs.
I couldn't get EITHER of them to both decode AND build, so I made two separate batch scripts.
I do promise that the thing's safe, but if you don't trust me, you can find them elsewhere - I'm just not sure exactly where. I found them by trial and error.
2) Unpack the tools to a directory, e.g. "apktool" on your desktop. (If you want to follow this guide to the letter, you need to use that folder too.)
3) Start a command prompt - Start -> Run -> enter "cmd" -> click OK
4) Connect your phone via USB, and make sure USB debugging is enabled on it (under Settings -> Developer Options)
5) Enter the following commands, exactly as specified, in order of course:
cd Desktop\apktool
adb pull /system/framework/framework-res.apk
java -jar apktool-BUILD.jar if framework-res.apk
adb pull /system/app/SecSettings.apk
apktool-d SecSettings.apk SecSettings-mod
You should now have a "SecSettings-mod" directory (under Desktop\apktool) with the contents of the APK.
6) Browse to SecSettings-mod\smali\com\android\settings\dormantmode, right-click "DormantModeNotiReceiver.smali" and Open With... -> Notepad (or right-click and "Edit", if that choice exists)
7) Click the Edit menu -> Find..., and search for "notificationCreate" (no quotes). The first hit should be ".method public notificationCreate [... etc]"; click Find Next.
The next hit should be something like
invoke-virtual {p0, p1}, Lcom/android/settings/dormantmode/DormantModeNotiReceiver;->notificationCreate(Landroid/content/ContextV
8) Comment that line out by adding a # as the very first character, so you end up with
# invoke-virtual {p0, p1}, Lcom/android/settings/dormantmode/DormantModeNotiReceiver;-notificationCreate(Landroid/content/ContextV
9) A few lines down (10 or so), there's another invoke-virtual, for notificationClear. Comment this out as well, aagin by adding a # as the first character on the line.
When you're done, save and exit.
10) OK, we're getting there. Time to rebuild the modded APK.
Go back to the command prompt (or start a new one, see above).
Run this command:
apktool-b SecSettings-mod SecSettings-new.apk
This may take a LONG while, it takes a bit over 11 minutes for me (nearly all of it to build resources). Be patient!
When it's completed, open up both the ORIGINAL .apk and the modded one in separate 7-zip windows. Delete "AndroidManifest.xml" from the modified apk, then select and copy "META-INF" and "AndroidManifest.xml" from the original to the modified APK. Exit 7-zip.
11) Time to get the modded file over to your phone! Run these commands:
adb remount
adb push SecSettings-new.apk /system/app
adb shell
12) You should now have the file on your phone, and have an adb shell open. Almost there!
If you're not root (i.e. if the command line ends with $ rather than #), run "su".
Then:
cd /system/app
mv SecSettings.apk SecSettings.apk.OLD
mv SecSettings-new.apk SecSettings.apk
... and you're finally DONE

[GUIDE][ADB] How to take a logcat

iamareebjamal said:
ADB:-
Android Debug Bridge
Very useful program made itself by Google for Programmers and developers. Its based on command line and basically communicates with your Android to respond to certain commands. There is vast amount of knowledge about adb but its most useful commands limit to getting:-
Logcat:-
A real time log of what is happening in background of our devices. It is really useful for developers to see which component has malfunctioned and helps to narrow down their search for what failed and what needs to be fixed. Several times users are asked to give logcats of their devices which are giving errors. We will go in detail that how to get logcats in every and easiest way possible.
App Installation and Management:-
adb proves really handy if you want to install apks directly from your PC or want to batch install or delete them.
Shell Execution:-
You must have heard of Terminal Emulator. It is an app for android to execute shell commands(linux commands) which are basically present as applets in /system/bin, /system/sbin or /system/xbin(in our case) folders. A very imporant applet called busybox is installed there mainly used for execution of basic commands during root browsing or ROM installation. Many times updater script of ROMs use busybox commands to install it. Well, these commands can be initiated from your device too but they can be initiated from adb also making it easy for programmers.
Pushing and Pulling:-
Most used commands of adb. adb makes it a piece of cake for new device developers to get an ideo of structure and basic knowledge of devices by pulling command. We can pull out i.e copy any files or folders from our devices to our PC, even the root directories without rooting the devices. It help rooters and ROM chefs of new devices to get an idea and implement their mods on them. Pushing is also very useful command. It copies your files and folders from PC to your device. Very useful in pushing some /system apps and other things
Remounting and setting permissions
Basic commands:-
Of-course basic commands such as rebooting and rebooting in recovery mode and download mode are supported.
Others:-
There are several other features of adb such as fastboot, aapt, etc
Setting up ADB
Pre Requirements:-
A little amount of brain
PC(This is a windows guide, if asked I will add linux and mac guide later)
Java Runtime environment or Java Developing kit
Your Device Drivers
An Android Device
USB Debugging MUST be turned ON in the device for ADB to see it & Developer options is hidden in Android 4.2 and
above, Hitting Build number 10 times in
About Phone/Tablet reveals the menu (Thanks lilHermit for reminding me to add it)
Assuming you all these ready and working properly, we continue
If you are having trouble completing Pre-Requisites, there are several guides featuring them too
Start
1. First Download Android SDK. Roughly about 70 MB
2. There may be any compressed zip file or exe file
If zip file, then extract it to C:\android-sdk
If exe file then double click on it and install it in C:\ Drive(or any other drive you want)
3. Now to get adb and other tools, you need to download 'Platform Tools'
To download them, go to the android-sdk folder and double click on SDK Manager
It will ask you which package to download? However, it is your choice which package to Download, but here, we will only talk about platform
Tools. So, simply tick on Platform Tools and click on install. Once you have done it. Go to the platform-tools folder in the directory where you installed android-sdk. You will find several files there like adb, fastboot, aapt, etc
4. Now, you can backup the whole folder of android-sdk to any external storage that will make you not download package
again if you want to. You can have it placed in any computer and run it as it does not require registry to work
5. Now, you are just one step away from using adb. Next step is SKIPPING SETTING ENVIRONMENT VARIABLE (If you however want to set environment variables. Click on Show Content)
We can easily append the sdk platform-tools and tools folder to your systems environmental path variable directly from command line(cmd) by simply issuing one command and performing a system reboot:
Code:
SETX PATH "%PATH%;[COLOR="Indigo"]SDK_Install_Path[/COLOR]\platform-tools;[COLOR="Indigo"]SDK_Install_Path[/COLOR]\android-sdk-windows\tools" -m
Just replace the "SDK_Install_Path" in the above with the proper path of your SDK installation. Example: C:\android-sdk-windows
(Thanks to WugFresh for telling me :victory
Many guides on internet say that it is to be done for making it easy for users and if you have some basic knowledge of Command Prompt,
you will know that to execute any application with command prompt, you first need to change the directory to the one where application is
placed. And to skip changing the directories every time you open CMD, you need to put that application is environment variable. Howeve, we will not do so.
6. Type cmd in the search bar. Copy cmd.exe from there. Go to the directory where you have installed android-sdk. Go to platform-tools folder. Paste cmd there, right click on it and in the settings, select Run as Administrator.
7. You are done. Now what to do in it?
ADB Commands
Type adb in command prompt. And several commands will show up on your screen. It is very difficult to analyse these all commands, so we will only talk about most used and important commands
Connect your device via USB cable
And open the CMD in platform-tools folder(Make a shortcut of it on desktop). And type the suitable commands
Code:
adb devices
Will show the list of devices attached to the PC andtheir serial numbers. If this shows up correctly on your PC, then it means that everything is fine for continuing.
Logcat
Code:
adb logcat
It will display the real time log of your device
Best time to do it is when your device boots up
Now, many users ask me how to copy the logcat and upload it from CMD
There are several methods:-
1. Right click on the Title Bar of Command Prompt. Hover the cursor over edit and select mark. Select all the things you want to copy and then click enter. All the things will be copied to clipboard.
2. This is the correct way of getting logcat saved.
Code:
adb logcat > logcat.txt
This command will create a logcat.txt document in platform-tools folder with the complete logcat of the device. Ofcourse you can type any name instead of logcat.txt
3. I prefer taking logcat this way as it neatly compiles logs of different time
Code:
adb logcat -v long > logcat.txt
This is a very nice way to get logcat.
Installing Apps
Code:
adb install %PATH OF APK%
This will install an app on your Android
For example, if my app AreeB.apk is in G:\ drive (G:\AreeB.apk)
Then I will type
Code:
adb install G:\AreeB.apk
Be sure your apk is not in a folder that has space in its name, else the command will break at space bar.
For eg:-
G:\Program Files\AreeB.apk
Note:
If you have spaces in path of apk, you can execute the command without breakage if you include the path inside quotes. (Thanks to etcman)
Eg:-
Code:
adb install "G:\Program Files\AreeB.apk"
Mounting
However, I never found any problem in tweaking with system files with adb, but some users said that they couldn't do it, so the problem was that their system partition was mounted as Read Only(R/O)
So, it is necessary now to tell how to mount system partition as Read Write(R/W)
Code:
adb remount
It is easiest way to do so, if it does not work then
There is another method that we will discuss in ADB Shell commands section
Pushing and Pulling
For pushing,
Type
Code:
adb push %PATH TO BE PUSHED% %PATH WHERE TO BE PUSHED%
Suppose I have an app named SystemUI.apk(PATH = G:\SystemUI.apk) which I want to push in /system/app/ on my android(or in other words, install an app as a system app). Then I would type
Code:
adb push G:\SystemUI.apk /system/app/
More examples
G:\Dance.txt file to be pushed in Dance folder in sdcard
Code:
adb push G:\Dance.txt /sdcard/Dance/
OR
Code:
adb push G:\Dance.txt /mnt/sdcard/Dance/
G:\Movies folder to be transferred in SDCARD in Videos Folder
Code:
adb push G:\Movies /sdcard/Videos/
G:\system\framework\framework-res.apk to be pushed in /system/framework/
Code:
adb push G:\system\framework\framework-res.apk /system/framework/
For pulling,
push command replaces with pull and paths are swapped
Code:
adb pull %PATH TO BE PULLED FROM% %PATH TO PLACE PULLED FILE%
Example,
All system apps are to be pulled to G:\ROM\system\app
Code:
adb pull /system/app G:\ROM\system\app\
build.prop to be extracted to desktop
Code:
adb pull /system/build.prop C:\Users\Areeb\Desktop\
However, if a folder is in platform-tools folder, you don't need to type full path
Suppose if I type
Code:
adb pull /system/ system
Then a folder named system will be created inside platform-tools with all the files in system in it
If a file is in platform-tools folder, then also no need to type full path
For example,
There is an app name DeskClock.apk in this folder then, to push it to /system/app, type
Code:
adb push DeskClock.apk /system/app/
ADB Shell Commands
This mode of adb allows you to execute linux shell commands from your PC
These commands can aldo be executed through the mobile using Terminal Emulator
To initiate shell mode
Type
Code:
adb shell
You will get an prompt like this
sh-3.2#
Now you are in shell mode
adb commands won't work here and a new set of commands will work here. But we will only go in a little detail here.
Assuming you are in adb shell mode, I will only type commands that will work on shell. Note:- These commands won't work if you type them alone on cmd. But, these command will directly work on your mobile's Terminal Emulator
As these commands can also work on mobile, I am going to tell you a way of taking logcat on mobile
Type
Code:
logcat
You will see log of your device
To save this
Type
Code:
logcat > /sdcard/log.txt
A file named log.txt will be generated in sdcard
Uninstalling Applications
Code:
cd /data/app
This will change the directory to /data/app
Code:
ls
This will show the list of files in there
Suppose, there is an app named com.opera.browser (Opera Mobile) you want to uninstall it
Type
Code:
rm -r com.opera.browser
This will uninstall the app
Mounting Command:-
Code:
mount -o rw,remount /dev/block/mtdblock3 /system
Miscellanous commands:-
su: Initiates root request
du: Shows file foldrs and size
date: Shows todays date
ls: Shows list of directory
cd: Changes working directory
rm: Removes the file
logcat: Displays logcat
mount: Mounts the partition
busybox: Busybox Applets
Forgot next ones, will write later
Credits
Google: For Android and several searchings
Samsung: For Galaxy Ace s5830I
paxChristos for amazing logcat guide
Broadcom: For their Open Sourceness
XDA Forums : For the precious knowledge
My Uncle: For gifting me this Phone
My Teachers: For teaching me English(I would not be here without them)
You: For future Thanks
Till now, thats it, will add some more things later
If any problem, I will add it too
Suggestion? They are welcome
Click to expand...
Click to collapse
This should help the new members in appealing their problems in a deeper and better way.
Originally posted by iamareebjamal
Original thread here.

Simple "Send/Install to Phone" Context menu [For ADB wireless]

Attn Moderator. This is a reply to:
http://forum.xda-developers.com/showthread.php?t=712433
I was able to use Tasker with the "Secure Settings" plugin [to turn on ADB Over Network and Wireless ABD Enabled/Wifi+]
[But you could also do this on your phone if you don't want to install anything additional http://forum.xda-developers.com/showthread.php?t=1685736]
To send APKs to my phone via wifi I did the following:
First I put adb.exe in C:\adb\
Then I ran the follow reg file:
Code:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.apk\shell\Install to Phone]
[HKEY_CLASSES_ROOT\.apk\shell\Install to Phone\command]
@="C:\\adb\\connect-to-phone.bat & C:\\adb\\adb.exe install %1"
[HKEY_CLASSES_ROOT\*\shell\Send to Phone]
[HKEY_CLASSES_ROOT\*\shell\Send to Phone\command]
@="C:\\adb\\connect-to-phone.bat & C:\\adb\\adb.exe push %1 /sdcard/"
If copying this setup exactly, you will also need to create the following file: C:\abd\connect-to-phone.bat
Code:
C:\adb\adb.exe disconnect&&C:\adb\adb.exe connect 192.168.1.101
[This is the static IP address of my phone, yours will probably be different] ^^
Does anyone know if there is a way to get this into the right click Send To > menu?
\\EDIT This script does not like file names with spaces, please make sure there are no special characters or spaces in the names of the files you are sending to the phone
Additionally, sometimes I've had to run it twice to get it to connect

Can someone please move this to the correct forum?

I was looking for this and I have modified above script to work properly for directories with spaces in its name. Simply change %1 in above script to \"%1\"
Thanks for the original version.
Make sure that whatever directory you point to one your phone already exists. It wont create a new folder for you.
In my case the above code became like this.
Code:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\*\shell\ADB Push to Phone]
[HKEY_CLASSES_ROOT\*\shell\ADB Push to Phone\command]
@="C:\\Program Files (x86)\\Minimal ADB and Fastboot\\adb.exe push \"%1\" /sdcard/ADBPush/"
[HKEY_CLASSES_ROOT\Folder\shell\ADB Push to Phone]
[HKEY_CLASSES_ROOT\Folder\shell\ADB Push to Phone\command]
@="C:\\Program Files (x86)\\Minimal ADB and Fastboot\\adb.exe push \"%1\" /sdcard/ADBPush/"
Install minimal adb and fastboot from xda if you dont have it. Change directories as suited to your system to point to adb.exe file. Location on phone must already exist. Edit in notepad, save as .reg file and install it.