Database Info

Getting to 4.3...got past 402 error!

Apologize in advance if this is intuitively obvious to other but after searching and reading a better part of the day, I can't figure it out...
In any case...I rooted my 4.1.2 phone a while back with the casual root. Didn't unlock the bootloader or install a custom recovery, just rooted. So that puts busybox and supersu on my phone. Later on, I installed a custom sound thing to get some decent volume out of this thing.
Now I tried taking the OTA and it failed. I thought it would just wipe out the root stuff and be on it's merry way (like other devices I've had in the past). So, I used the one touch unroot in SuperSu and tried again. Still failed. And it still showed me busybox in the app drawer.
So, here's my question...
Do I need to remove my custom volume thing as well as do the unroot?
And do I need to uninstall busybox before doing the unroot via supersu? Or do i just go to the apps and install it there after the SuperSu unroot?
And, if none of those work right, do I fall back to flashing 4.1.2 directly - or maybe better to flash 4.3 directly? I plan on using saferoot once I'm up to 4.3.
If anyone can help me sort this out, I'd greatly appreciate it. I'm rerooted for the moment.
Thanks!

doncaruana said:
Apologize in advance if this is intuitively obvious to other but after searching and reading a better part of the day, I can't figure it out...
In any case...I rooted my 4.1.2 phone a while back with the casual root. Didn't unlock the bootloader or install a custom recovery, just rooted. So that puts busybox and supersu on my phone. Later on, I installed a custom sound thing to get some decent volume out of this thing.
Now I tried taking the OTA and it failed. I thought it would just wipe out the root stuff and be on it's merry way (like other devices I've had in the past). So, I used the one touch unroot in SuperSu and tried again. Still failed. And it still showed me busybox in the app drawer.
So, here's my question...
Do I need to remove my custom volume thing as well as do the unroot?
And do I need to uninstall busybox before doing the unroot via supersu? Or do i just go to the apps and install it there after the SuperSu unroot?
And, if none of those work right, do I fall back to flashing 4.1.2 directly - or maybe better to flash 4.3 directly? I plan on using saferoot once I'm up to 4.3.
If anyone can help me sort this out, I'd greatly appreciate it. I'm rerooted for the moment.
Thanks!
Click to expand...
Click to collapse
OTA will look for any rooted app and fail so you best bet is just Odin the full 4.3 then root with saferoot. This is you also have a nice clean install.

buhohitr said:
OTA will look for any rooted app and fail so you best bet is just Odin the full 4.3 then root with saferoot. This is you also have a nice clean install.
Click to expand...
Click to collapse
Thanks!
Been a looong time since I messed with Odin...this will just be firmware - no data or store apps will be touched, right?

doncaruana said:
Thanks!
Been a looong time since I messed with Odin...this will just be firmware - no data or store apps will be touched, right?
Click to expand...
Click to collapse
Sorry but flashing the full firmware will wipe everything bring it back to factory stock phone, so you need to backup all your stuff.

Well, just to share with everyone, I did not flash back to stock. For a number of reasons, that wasn't really an option.
My first step was removing viper4android. That actually got rid of the "custom" screen with the open lock on boot.
Then I uninstalled busybox from within itself. Unfortunately, as noted elsewhere, that leaves several hundred symlinks in xbin, so I removed all of those (I was only left with dexdump and su there). After that, I actually uninstalled busybox via the app manager.
Then I used the unroot option in supersu to clean up the rest and remove it.
At this point, I should be completely unrooted, but still got the 402 error when failing to upgrade with the OTA.
So...I plugged the phone in and ran the software upgrade assistant that shows up on the "CD" that presents itself from the phone when you plug it in to USB to the computer. And, actually, that successfully completed the upgrade to 4.3!
Haven't embarked on re-rooting yet (using saferoot) but that's the plan at least.

So you can no longer root p900?

I sold my p905 a while back, going to get a p900 however, the biggest factor is able to delete files on the sd card. I know I have to root it, however, from what I read there's issues and you can no longer root it?.

rirawin said:
I sold my p905 a while back, going to get a p900 however, the biggest factor is able to delete files on the sd card. I know I have to root it, however, from what I read there's issues and you can no longer root it?.
Click to expand...
Click to collapse
Use Odin to Flash TWRP then use TWRP to Flash Super SU.

nrage23 said:
Use Odin to Flash TWRP then use TWRP to Flash Super SU.
Click to expand...
Click to collapse
Thanks, so no issues with rooting with latest firmware?.

http://androidxda.net/root-samsung-galaxy-note-pro-12-2-all-variants-on-android-4-4-2-kitkat/
This guide?, been ages since I rooted.

rirawin said:
http://androidxda.net/root-samsung-galaxy-note-pro-12-2-all-variants-on-android-4-4-2-kitkat/
This guide?, been ages since I rooted.
Click to expand...
Click to collapse
I love how that guide says all variants and then makes no mention of the P907. I would love to be able to use a custom recovery. Unless the P907 falls under the LTE moniker even though the model number is different?

Yes, TWRP works with P900
I went through this a week ago (with some help) and once I figured out how to get TWRP 2.8 to flash using Odin the process of rooting and installing a custom rom was easy. There is a thread a little lower on this forum that goes through the process.
Keith

do you have the link please.
What happens if I wish to unroot?

rirawin said:
do you have the link please.
What happens if I wish to unroot?
Click to expand...
Click to collapse
I can't post a link but the thread is in this forum. I have not unrooted but there are several threads that mention going back to stock.

Please can someone link me to an up to date method to root?
I understand towelroot only works for p905 and p900/

okay
rirawin said:
Please can someone link me to an up to date method to root?
I understand towelroot only works for p905 and p900/
Click to expand...
Click to collapse
I do not have enough posts to link an email. About three weeks ago I had the same question. The thread is in this forum on page 3, 5 or so messages down. I am the op, stedmakr. Gastrom answered the thread, provided a link and helped me root the p900 and install his rom (its excellent). Sorry I can't post links. Page 3 of this forum.
Keith

http://forum.xda-developers.com/gal...reliable-root-method-p900-build-bnk1-t2986600
I still don't quite understand, I just like to root to get sd card fix

Since there's this thread... How about KNOX? Is there a way to root P900 without tripping KNOX flag? I don't care about KNOX software itself, but since here in Poland warranty problems are left to the decision of the service, it is quite important for me not to give them opportunity to refuse a repair (if something happens, which - I hope - never will).
Wytaptalkowane na notatniku

Peri Noid said:
Since there's this thread... How about KNOX? Is there a way to root P900 without tripping KNOX flag? I don't care about KNOX software itself, but since here in Poland warranty problems are left to the decision of the service, it is quite important for me not to give them opportunity to refuse a repair (if something happens, which - I hope - never will).
Wytaptalkowane na notatniku
Click to expand...
Click to collapse
Nope, no way to avoid Knox trip.
Sent from my SM-P900 using Tapatalk

can anyone confirm please, is this the method to root:
https://androidxda.net/root-samsung-galaxy-note-pro-12-2-all-variants-on-android-4-4-2-kitkat/
So after I done that, I update su user and then I install sdfix is that right?.

anyone please?

Are you having problems or just too afraid to try it?
Not sure if you realize this but one of the reasons people aren't answering you is because those of us who have rooted do so and never look back. I wish I could tell you for sure that it will work with the current version of the firmware but I cant . . I rooted 8 months ago and haven't looked back. I cant speak for others but I'm not about to flash stock and go through the whole thing again just to update an old thread so I suspect that this is part of the reason that there's no updated guide. For devices that get a ton of development things are different but this niche device doesn't have a flurry of development activity surrounding it so . . .
One thing I can say is that it is my experience that if CF Autoroot fails the worst thing you're left with is a tripped knox and the stock rom without root. I say this because I was one of the unlucky ones who had to struggle through multiple attempts to get CF Autoroot to work. Eventually it did but during that time I had multiple shots at it and each time I was able to at least recover to the point of getting stock OS and recovery working again.
I see no reason why you can't achieve root on a SM-P900. If you can't do it with CF Autoroot then just download one of Gatsrom's images of stock rooted, flash TWRP using Odin (with auto reboot option disabled), boot into TWRP and do a full wipe and flash Gatsrom's image. You'll lose your setup and apps but you'll get root.

muzzy996 said:
Are you having problems or just too afraid to try it?
Not sure if you realize this but one of the reasons people aren't answering you is because those of us who have rooted do so and never look back. I wish I could tell you for sure that it will work with the current version of the firmware but I cant . . I rooted 8 months ago and haven't looked back. I cant speak for others but I'm not about to flash stock and go through the whole thing again just to update an old thread so I suspect that this is part of the reason that there's no updated guide. For devices that get a ton of development things are different but this niche device doesn't have a flurry of development activity surrounding it so . . .
One thing I can say is that it is my experience that if CF Autoroot fails the worst thing you're left with is a tripped knox and the stock rom without root. I say this because I was one of the unlucky ones who had to struggle through multiple attempts to get CF Autoroot to work. Eventually it did but during that time I had multiple shots at it and each time I was able to at least recover to the point of getting stock OS and recovery working again.
I see no reason why you can't achieve root on a SM-P900. If you can't do it with CF Autoroot then just download one of Gatsrom's images of stock rooted, flash TWRP using Odin (with auto reboot option disabled), boot into TWRP and do a full wipe and flash Gatsrom's image. You'll lose your setup and apps but you'll get root.
Click to expand...
Click to collapse
Well said mate! Well said.
If someone's gonna root their tablet, especially one of this caliber & price point. Then they should know how to recover it back to stock on their own. Concerning the tripping of Knox, who cares! Samsung won't turn down a hardware issue covered under warranty just because you decided to load another ROM. That topic has been discussed to death in another thread. If your going to root this thing, then root it and live on! LoL ?
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.

Android.Ninja said:
Samsung won't turn down a hardware issue covered under warranty just because you decided to load another ROM.
Click to expand...
Click to collapse
Not here in Poland...

[ROOT]Samsung Note 5 Verizon SM-N920V 6.0.1

Mod Edit

So this is BS right? I've been out of the phone rooting game for a bit.
Sent from my SM-N920V using Tapatalk

Mod Edit

MrMike2182 said:
Why are you trying to get people to do this when it's not FULL ROOT?! You basically took the same exact console root eng kernel that is listed here https://forum.xda-developers.com/verizon-galaxy-note5/general/root-n920v-t3538192 and just renamed it..
Do not do this it's simply console root and nothing else!!
Click to expand...
Click to collapse
Lol at the if you see SuperSU you're rooted. I mean, if the CF auto works cool, but I'm gonna wait to see how many people don't read first and try to flash this.

tylerlawhon said:
Lol at the if you see SuperSU you're rooted. I mean, if the CF auto works cool, but I'm gonna wait to see how many people don't read first and try to flash this.
Click to expand...
Click to collapse
LOL there isn't even a CF auto root for the N920V!! He seriously just took the same one we already have for console root and renamed it! They're even the same exact size, haha. Besides, where does he think the SuperSU app is coming from? It sure ain't from the file he has posted because that's just the console root kernel and that doesn't install/ flash SuperSU it only flashes the boot.img..

tylerlawhon said:
..
Click to expand...
Click to collapse
There's to many inexperienced people claiming root and cluttering the hell out the forums!! Even on the easy-firmware website he posted this same exact thing and when a user asked him a question he didn't even know the answer and told the user to flash and report back with his findings.. This thread is totally not needed at all!!

Stuck in the boot interface

tylerlawhon said:
Lol at the if you see SuperSU you're rooted. I mean, if the CF auto works cool, but I'm gonna wait to see how many people don't read first and try to flash this.
Click to expand...
Click to collapse
Well there goes 1 who didn't read first lol.

please remove this threade Please .
it's worng from inexperienced someone

I know this website, easy firm ware listed above, to be a scam site. I've seen a lot of different angles they've tried INCLUDING a download manager quote unquote that is supposed to help you finish downloading. But this is a trojan app. While I never fired it up I can tell you it doesn't look like something a windows user should execute on their system. I use linux.
(mods I promise I know this site is a scam site I've watched them work over the past couple months as I researched my studies)
Regards to root. If you are patched for dirtycow good luck getting root on this phone. (see below for dirtycow patch details) The AT&T / Verizon variants of the Note 5 are extremely well coded you can't get root on them without a powerful exploit. With dirtycow available the days are numbered for any phones not patched, of course not patching your phone in the meantime means you are very vulnerable to a nasty exploit.
So how long right? I dunno but it could be awhile.
Patch details:
Google says the fix is called CVE-2016-5195 patched 11-05-2016, however my security patch level is Nov 1st, 2016. The Samsung SVE-2016-7504 is stated to be included in November's patches and there are 14 patches in that set. AT&T N920AUCS4CPK1 has a note about 14 patches from Samsung, the exact number. (so I seem to be patched if I follow the logic even though Google responded on 11/05/2016 but I dunno how to confirm what's in this Nov 1 2016 security patch in the PK1 firmware.)

It doesn't really matter if they've patched it, you can still downgrade your firmware and security level - even on this variant. I used to go between Marshmallow and Lollipop, as it was required by the ps3 controller app.

Turbine1991 said:
It doesn't really matter if they've patched it, you can still downgrade your firmware and security level - even on this variant. I used to go between Marshmallow and Lollipop, as it was required by the ps3 controller app.
Click to expand...
Click to collapse
Which part are you saying you can downgrade? You can't take the Lollipop firmware and flash it if you're currently on the latest firmware update. It will just fall in odin.

That's just not true. The Verizon model can be flashed in Odin, I've done it a few times myself. Here's someone elses word: https://forum.xda-developers.com/verizon-galaxy-note5/general/downgrade-to-lollipop-5-1-1-verizon-t3368250
It's not impossible, you just need to use an official firmware and may need to downgrade the bootloader.

Turbine1991 said:
That's just not true. The Verizon model can be flashed in Odin, I've done it a few times myself. Here's someone elses word: https://forum.xda-developers.com/verizon-galaxy-note5/general/downgrade-to-lollipop-5-1-1-verizon-t3368250
It's not impossible, you just need to use an official firmware and may need to downgrade the bootloader.
Click to expand...
Click to collapse
Uh, Sir, the link you just posted.. *I* am the original poster of that and I'm telling you with official firmware you still CANNOT go from the latest firmware update of Marshmallow back to Lollipop! I even stated in my OP that it's not going to once you accept the BPI3 firmware update you're done and stuck on Marshmallow with no way to go back not even if you follow my original instructions it won't work!! The bootloader is no longer downgradeable thanks to Verizon!

Dirty cow or not is irrelevant. We can upgrade or downgrade and we're able to root this phone just like any other variant.
The only issue is the bootloader's signature checking.

so this is crap, thanks for the further investigation

There's a simply check for a value that they are calling a binary number. What is that? Certain versions will work together but past a certain point something changes. (most often the security storage binaries) .. So the bootloader checks to see if binary # >= current firmware binaries ... If you are on S3 binary and you attempt to flash S2 binaries the bootloader newly rejects this.
I can and have written a tool to over come this problem but there is one catch. system.img is too large for me to hack into place in this way. If I can't rewrite system.img then we are still stuck. ;*(
So what am I doing? I need root so I can just dd write system.img from /sdcard/ to the partition. that's it..
Stop listening to people who are not spending all their free time looking at the Note 5.. I already have too much access for the Note 5 to survive now.. It's going down, it is not the super secure device that will refuse to boot 'ever again' if you modify stuff that Samsung tried to claim.. that was lies and nonsense (don't hack BOTA0 or BOTA1 though)... I haven't tested changes to this partitions, all others have suffered a beating from me. (if you disable certain packages without disabling other packages it will refuse to boot, no wiping will help, reflash time)

droidvoider said:
There's a simply check for a value that they are calling a binary number. What is that? Certain versions will work together but past a certain point something changes. (most often the security storage binaries) .. So the bootloader checks to see if binary # >= current firmware binaries ... If you are on S3 binary and you attempt to flash S2 binaries the bootloader newly rejects this.
I can and have written a tool to over come this problem but there is one catch. system.img is too large for me to hack into place in this way. If I can't rewrite system.img then we are still stuck. ;*(
So what am I doing? I need root so I can just dd write system.img from /sdcard/ to the partition. that's it..
Stop listening to people who are not spending all their free time looking at the Note 5.. I already have too much access for the Note 5 to survive now.. It's going down, it is not the super secure device that will refuse to boot 'ever again' if you modify stuff that Samsung tried to claim.. that was lies and nonsense (don't hack BOTA0 or BOTA1 though)... I haven't tested changes to this partitions, all others have suffered a beating from me. (if you disable certain packages without disabling other packages it will refuse to boot, no wiping will help, reflash time)
Click to expand...
Click to collapse
I tried to tell everyone that this was straight up BS back when I was asking for help and no one wanted to risk it nor did they believe me.. Instead they chose to believe this instead of me..
http://www.idigitaltimes.com/samsung-galaxy-note-5-galaxy-s6-edge-specs-and-features-att-and-verizon-models-wont-468357

Would flashing the tar file in the OP give me the ability with ADB to delete, rename or change the bootsamsung.qmg and bootsamsungloop.qmg files? All I want to do is swap those out for another set. Would I then need to flash something else to bring it back to normal?

MrMike2182 said:
I tried to tell everyone that this was straight up BS back when I was asking for help and no one wanted to risk it nor did they believe me.. Instead they chose to believe this instead of me..
http://www.idigitaltimes.com/samsung-galaxy-note-5-galaxy-s6-edge-specs-and-features-att-and-verizon-models-wont-468357
Click to expand...
Click to collapse
You seem to have a good grasp on the situation and seem to talk sense, so I'll just ask a question. I'm only passing through because I needed some info, but got interested in the thread.
It seems you have the eng boot for the device, but not able to get system to mount rw? Strange because I have checked it and it is a bonafide eng boot.
Anyway I don't own this device, but I thought I'd just share some info that allowed others to get root on a few recent ATT devices with locked bootloaders on MM.
Using Kingroot on the said devices would not work, no matter how many times or which version was used. However flashing the eng boot from the combination firmware (so not even full eng boot as no root shell with adb) and then using Kingroot, Kingroot was able to successfully root these devices even though with some it took several tries. Kingroot was then used to convert to Supersu.
This may have been tried already, but I couldn't see it. Someone tried it with stock, but not using the eng binary.
The combination eng binary allows the device to boot in permissive mode with no dm-verity, but doesn't have a root shell or any write access with adb. The full eng boot you have should do the same obviously with the addition of adb root shell.
It's just for info and I'm not claiming it will work on Verizon devices, but it seems to be pretty successful on ATT and Tracfone devices.

[ROOT][MAGISK] For Asus ZenPad 10 3s[P027]

Just goot this device rooted! Just gonna test the script a few times so there isent any bugs and i will upload it!
EDIT: Systemless Root methods like Magisk resets after root(I Think SuperSu works if u tweak dm-verity in the kernel). But using system-root both breaks saftynet and is boring
So im gonna try to edit the boot img to work with magisk or SuperSU even if the bootloader is locked.
If none of theese things works there is a way to Re-root after each reboot but its ofc much easyer just to edit the boot.img or unlock the BL
EDIT 2: I will also try to reverse engineer the bootloader to try to find a weak point where we can unlock it, for easyer rooting and creating custom roms
EDIT 3: Also forgot to mention xposed works because you dont "need" root. If anyone want xposed just reply in the thread and il upload the script "as is" even though it resets after each reboot, but root works perfect have tested multiple apps.
And as i said before, before i release the root method publicly i want to check if its the BL who "resets" the kernel like on some HTC devices or if its a simple dm-verity problem , if it is the dm-verity thing its easy to fix.
More info:
Flashing kernel,system,recovery works because the only partitions that are protected are the BL and FRP partions but not for long
So far:
Magisk: Works
Bootloader: Locked
Saftynet: Passes
Proof:
https://i.imgur.com/8uABTSl.jpg
Download:
Code:
Comming in an hour! Just gotta check the updatescript for errors before posting :)

j wait for your script to root my Z500 m thanks to you.

Wow, finally there's a method to root. I own the device since august and I really want to get it rooted due to all bloatware I want to uninstall and to install 3rd party apps.:good:

super thanks to you me too and thanks to you I could root the tablet with all s is unnecessary thank you for your work:good::good::good:

Cant wait
Wow.... time is ticking to bring root to the P027
I can't wait for an update on this.
There must be another way to get a rooted ASUS P027. I tried much but don't have any success. I think that there is a way to push some files manually to /data/local/tmp. Setting right permissions using adb. Finally executing a root-shell-script from one of many should do the rest. Problem is not to get the files inside the system, you have to do it again after each reboot.
I'm a bit nervous to modify bootloaders and flash them on the go with no oem support. If some support for this device comes available from ASUS it should be a lot easyer to do.
I cant upload photo's till i'm no longer seem like a robot. I also got some kind of root on my P027. only for a moment. After reboot it is gone.

I can't wait for that!

Will it come out soon..... so excited ^_^

BigThanh said:
Will it come out soon..... so excited ^_^
Click to expand...
Click to collapse
here too...the hour is over

That would be great

hey, very good news!! I am waiting a long time for this. It would also be nice, if you can give us your xposed script. Thnkas!!

Is p207 the model number? I'm only finding it listed as Z500M.

joshnat said:
Is p207 the model number? I'm only finding it listed as Z500M.
Click to expand...
Click to collapse
Yes

Ok guy's where do we stand on root as of 5pm Wednesday 10.04.2017 ??
I bought the ASUS Zenpad 3S 10 [P027] off Amazon on Saturday on a flash sale for $265, knowing it didn't have root, and that's a shame because it's a beautiful & buttery smooth tablet.
Today, as I was pondering boxing it up for a return, I figured I'd look for myself once more for the hell-of-it, AND BOOM! I found this thread!
So where are we guys? I'll test it for ya or whatever! So friggin' pumped ROOT has been established! Dare I say -Vanilla Oreo ROM with onscreen softkeys??? YEAH!

Really looking forward to this! I don't mind getting my hands dirty, but just waiting for the script I'm very happy to have stumbled upon this thread, can't wait to have root on this tablet!!

Fortunately we will get to see the script. I own the P027 since auust 17. A very good hardware. But without root its only worth half. So, me too is awaiting the script but so far I guess we still have to wait. Til now, no root app works (iRoot, Kingo, e.g.) Very sad because I think that once we rooted it and get rid of all the OEM bloatware, this tab may rocks a lot more.

Prinz069 said:
Fortunately we will get to see the script. I own the P027 since auust 17. A very good hardware. But without root its only worth half. So, me too is awaiting the script but so far I guess we still have to wait. Til now, no root app works (iRoot, Kingo, e.g.) Very sad because I think that once we rooted it and get rid of all the OEM bloatware, this tab may rocks a lot more.
Click to expand...
Click to collapse
to remove bloatware, i followed this guide. I can confirm ist works.
https://www.xda-developers.com/uninstall-carrier-oem-bloatware-without-root-access/

Can you go ahead and upload the script for those of us brave enough to try it? Thank you for all your hard work!

I got root and xposed. But I don't have a way to get it in that device
At my next post will I upload a photo or link of my own (semi) rooted P027. The Magic of rooting a device which is unsupported is far away from easy as flashing chainfire's zips or something possible using Odin or what. Most likely if there was a custom recovery for the P027 root would be easy because of all possibilities you have.
I've tried a lot of other ways to get in to try modify something in that locked system. It is hard to get there without losing patients! I also lose social networks I belong to. Even if days counts 48 hour instead of 24, root wasn't there with the success I had hope to. Sometimes only after manually redirecting some files with adb and manually setting right permissions to every file. It becomes possible to get accessing "su" in terminal app. Only sometimes, after each modifying something, you're device needs to reboot for applying that modification. At that point you lose everything before you can use it.
If someone can post latest boot.img I will try to patch it with Magisk. If that is possible it will get easier to activate systemless xposed. A few weeks ago on note 8 launch day... It took at least 1 hell of a day before root came available on xda. Also twrp and custom roms are available.
Hope soon to make it happening for real.

hi I would buy this tablet but wanted to understand root situation. can you run the root on this device? you can install Rom?

toineh said:
At my next post will I upload a photo or link of my own (semi) rooted P027. The Magic of rooting a device which is unsupported is far away from easy as flashing chainfire's zips or something possible using Odin or what. Most likely if there was a custom recovery for the P027 root would be easy because of all possibilities you have.
I've tried a lot of other ways to get in to try modify something in that locked system. It is hard to get there without losing patients! I also lose social networks I belong to. Even if days counts 48 hour instead of 24, root wasn't there with the success I had hope to. Sometimes only after manually redirecting some files with adb and manually setting right permissions to every file. It becomes possible to get accessing "su" in terminal app. Only sometimes, after each modifying something, you're device needs to reboot for applying that modification. At that point you lose everything before you can use it.
If someone can post latest boot.img I will try to patch it with Magisk. If that is possible it will get easier to activate systemless xposed. A few weeks ago on note 8 launch day... It took at least 1 hell of a day before root came available on xda. Also twrp and custom roms are available.
Hope soon to make it happening for real.
Click to expand...
Click to collapse
Here is the boot.img from WW_V14.0210.1709.27: https://mega.nz/#!4bQExBTB!5fyivXxvP4aYAxCDjsYRJ1X7o1wMXYGBLf1TO0ns-z4
I downloaded the WW_V14.0210.1709.27 firmware from ASUS Support then unzip the package to get this file.
Hope it will be helpful to you. I am really looking forward to root this device!
Thank you for your hard work!

Help rooting Samsung galaxy j3 (sm-J337a)

It seems everywhere I go there is no root for this phone (sm-J337a) it's an at&t phone. I used kingoroot, kingroot and basically any root out there. nothing has worked. So this seems that it has no root made for it yet? is there any possibility for someone to do this? Sorry, I'm not too good at rooting as a whole. But I've used Odin and things like that before.
there doesn't even seem to be CWM or TWRP for this phone either.
it's running Android 8.0 and was made in 2018.

Right?
I'm having the same issue. I can't figure out how to root mine either and I've got the same phone and carrier.

nickthekid said:
It seems everywhere I go there is no root for this phone (sm-J337a) it's an at&t phone. I used kingoroot, kingroot and basically any root out there. nothing has worked. So this seems that it has no root made for it yet? is there any possibility for someone to do this? Sorry, I'm not too good at rooting as a whole. But I've used Odin and things like that before.
there doesn't even seem to be CWM or TWRP for this phone either.
it's running Android 8.0 and was made in 2018.
Click to expand...
Click to collapse
Details of your current ROM Please..?
Build number etc...

Hi all.. I know this thread is a little old but thought id add this.. As of this date Ive found no ROOT solution for the SM-J337A - AT&T variant either.. I have found a lot of other software and such and as soon as I can get it all sorted, cataloged, and uploaded to the cloud I will see about placing some links here somewhere to all of them.. Not sure how long it will be..Stay tuned...
I happen to inherit a J337A with a cracked screen but was working fine until I updated it and tryed ROOTing it.. Im still Playing with it to see if I can revive it.
Having issues finding a UB compatible Firmware set that I dont have to pay for.
Am needing "J337AUCSBBTI1" or maybe "J337AUCSABTE1" to see if I can bring it back to life.. I may end up pitching it tho...
My Device:: SM-J337A
FCC-ID : A3LSMJ337A
Samsung/j3toplteuc/j3toplteatt
CURRENTLY STUCK ON COMBINATION ROM : (8.0.0/R16NW/J337AUCUBATH1/user/release-keys)
BINARY/BOOTLOADER : UB

iamoz said:
Hi all.. I know this thread is a little old but thought id add this.. As of this date Ive found no ROOT solution for the SM-J337A - AT&T variant either.. I have found a lot of other software and such and as soon as I can get it all sorted, cataloged, and uploaded to the cloud I will see about placing some links here somewhere to all of them.. Not sure how long it will be..Stay tuned...
I happen to inherit a J337A with a cracked screen but was working fine until I updated it and tryed ROOTing it.. Im still Playing with it to see if I can revive it.
Having issues finding a UB compatible Firmware set that I dont have to pay for.
Am needing "J337AUCSBBTI1" or maybe "J337AUCSABTE1" to see if I can bring it back to life.. I may end up pitching it tho...
My Device:: SM-J337A
FCC-ID : A3LSMJ337A
Samsung/j3toplteuc/j3toplteatt
CURRENTLY STUCK ON COMBINATION ROM : (8.0.0/R16NW/J337AUCUBATH1/user/release-keys)
BINARY/BOOTLOADER : UB
Click to expand...
Click to collapse
I can help you with that if you still need it. I have my j3 rooted with magisk, although there is no twrp or any custom recovery for that matter..
I can give you the exact files along with the patched magisk file and you'll have to flash it with patched odin and you should be good. Let me know.

rip21skinz said:
I can help you with that if you still need it. I have my j3 rooted with magisk, although there is no twrp or any custom recovery for that matter..
I can give you the exact files along with the patched magisk file and you'll have to flash it with patched odin and you should be good. Let me know.
Click to expand...
Click to collapse
Yes I would be interested in having those files please... Either upload them here or I can give you an email if you prefer... Let me know..

rip21skinz said:
I can help you with that if you still need it. I have my j3 rooted with magisk, although there is no twrp or any custom recovery for that matter..
I can give you the exact files along with the patched magisk file and you'll have to flash it with patched odin and you should be good. Let me know.
Click to expand...
Click to collapse
Instead of sending a patched magisk file would you mind sending over the method you used to root? If you did what I think you did I'm very confused. The phone is OEM locked although this hasn't stopped others from accessing root before. If you can confirm you have the phone we have, the SM-J337A ATT then you can pull out the boot and recovery images using a root app. Then I could develop a working TWRP for our device. But ofc this is only possible if you explain how you went about rooting the device. Thanks in advance.

NonStickAtom785 said:
Instead of sending a patched magisk file would you mind sending over the method you used to root? If you did what I think you did I'm very confused. The phone is OEM locked although this hasn't stopped others from accessing root before. If you can confirm you have the phone we have, the SM-J337A ATT then you can pull out the boot and recovery images using a root app. Then I could develop a working TWRP for our device. But ofc this is only possible if you explain how you went about rooting the device. Thanks in advance.
Click to expand...
Click to collapse
I have both SM-J337P/A and it works the same on both. I'm not sure why you wouldn't be able to be oem unlocked? You mean greyed out? Or does it not show up at all or what? If I go into developer options I have the oem unlock option, which then allows me to unlock the bootloader. If yours is greyed out I saw a solution on XDA a long time ago, maybe a year ago. I'd have to look for it in my files, I know I saved it somewhere. Let me know what you meant by that and we can go from there

rip21skinz said:
I have both SM-J337P/A and it works the same on both. I'm not sure why you wouldn't be able to be oem unlocked? You mean greyed out? Or does it not show up at all or what? If I go into developer options I have the oem unlock option, which then allows me to unlock the bootloader. If yours is greyed out I saw a solution on XDA a long time ago, maybe a year ago. I'd have to look for it in my files, I know I saved it somewhere. Let me know what you meant by that and we can go from there
Click to expand...
Click to collapse
I do not have the option to OEM Unlock the phone period. It is not in my developer options unfortunately. If you do find something of that nature please do contact me. Also if you would like a TWRP for your device I'd be up to developing it, although I wouldn't be able to maintain bugs... All I need is the kernel and I can get it done.

Any updates on this?