Related
ok so i have a htc sensation and i installed clockwork mod touch recovery.
i then flashed cm10.1 and wiped data and dalvik but it stayes at the spinning cyanogenmod boot animation
am i using the wrong kernal as i couldent find one on the jellybean post http://forum.xda-developers.com/showthread.php?t=2115520
SamzWorldOfMusic said:
ok so i have a htc sensation and i installed clockwork mod touch recovery.
i then flashed cm10.1 and wiped data and dalvik but it stayes at the spinning cyanogenmod boot animation
am i using the wrong kernal as i couldent find one on the jellybean post http://forum.xda-developers.com/showthread.php?t=2115520
Click to expand...
Click to collapse
why did you wipe data and dalvik after rom's installation?
follow these steps
full wipe from recovery
flash the rom
flash gapps
reboot
done
note:the initial boot takes a while
rzr86 said:
why did you wipe data and dalvik after rom's installation?
follow these steps
full wipe from recovery
flash the rom
flash gapps
reboot
done
note:the initial boot takes a while
Click to expand...
Click to collapse
ok will try now sorry for multiple post btw
edit nope still stuck spinning anything else i could have done wrong. i didnt root the stock os before installing cm10 could this be why
SamzWorldOfMusic said:
ok will try now sorry for multiple post btw
edit nope still stuck spinning anything else i could have done wrong. i didnt root the stock os before installing cm10 could this be why
Click to expand...
Click to collapse
no it doesn't matter if you didn't root the stock one
cm10 comes already pre-rooted
do this
connect your device in fastboot mode to pc(in bootloader must say fastboot usb)
extract the boot.img from the rom.zip and place it in your adb and fastboot folder(i assume you have installed sdk tools)
open in that folder a cmd window and do fastboot flash boot boot.img
then do fastboot reboot
rzr86 said:
no it doesn't matter if you didn't root the stock one
cm10 comes already pre-rooted
do this
connect your device in fastboot mode to pc(in bootloader must say fastboot usb)
extract the boot.img from the rom.zip and place it in your adb and fastboot folder(i assume you have installed sdk tools)
open in that folder a cmd window and do fastboot flash boot boot.img
then do fastboot reboot
Click to expand...
Click to collapse
i already have but the boot.img from the rom zip has no recovery if i press recovery it continues to boot cm10
SamzWorldOfMusic said:
i already have but the boot.img from the rom zip has no recovery if i press recovery it continues to boot cm10
Click to expand...
Click to collapse
actually you flash the boot.img from pc
you misunderstood me
edit:wait do you have a problem for booting to the recovery?
rzr86 said:
actually you flash the boot.img from pc
you misunderstood me
edit:wait do you have a problem for booting to the recovery?
Click to expand...
Click to collapse
i did flash from pc using (fastboot flash recovery boot.img) command it flashes sucsessfully but when i enter recovery via bootloader it just starts booting instead of entering recovery but itf i flash cwm recovery it enters recovery fine. if you want i can upload a video showing whats happening.
SamzWorldOfMusic said:
i did flash from pc using (fastboot flash recovery boot.img) command it flashes sucsessfully but when i enter recovery via bootloader it just starts booting instead of entering recovery but itf i flash cwm recovery it enters recovery fine. if you want i can upload a video showing whats happening.
Click to expand...
Click to collapse
let me put it simple
for flashing recovery ->fastboot flash recovery recovery.img
for flashing boot.img ->fastboot flash boot boot.img
do you see your mistake now?
rzr86 said:
let me put it simple
for flashing recovery ->fastboot flash recovery recovery.img
for flashing boot.img ->fastboot flash boot boot.img
do you see your mistake now?
Click to expand...
Click to collapse
OOOOhh okay i see now i feel dumb just did it and its booting well see what happens
edit still stuck at cm boot animation ;\ sorry if im really noobish i have never modified a htc before
SamzWorldOfMusic said:
OOOOhh okay i see now i feel dumb just did it and its booting well see what happens
edit still stuck at cm boot animation ;\ sorry if im really noobish i have never modified a htc before
Click to expand...
Click to collapse
still stuck at cm logo?
did you wait enough?
can you post again your bootloader details?
rzr86 said:
still stuck at cm logo?
did you wait enough?
can you post again your bootloader details?
Click to expand...
Click to collapse
its the se as the other post details nothing has changed
SamzWorldOfMusic said:
its the se as the other post details nothing has changed
Click to expand...
Click to collapse
what recovery do you have installed?
rzr86 said:
what recovery do you have installed?
Click to expand...
Click to collapse
cwm touch recovery
SamzWorldOfMusic said:
cwm touch recovery
Click to expand...
Click to collapse
change it to 4ext recovery
link in my signature
somewhere it says If you somehow lost those files, there's a direct download for a version you can flash via fastboot.
click on download,extract the recovery.img and place it in your adb and fastboot folder
you know the rest
don't make any mistake while entering fastboot command hehe
after that flash again cm rom
rzr86 said:
change it to 4ext recovery
link in my signature
somewhere it says If you somehow lost those files, there's a direct download for a version you can flash via fastboot.
click on download,extract the recovery.img and place it in your adb and fastboot folder
you know the rest
don't make any mistake while entering fastboot command hehe
after that flash again cm rom
Click to expand...
Click to collapse
ok will try
SamzWorldOfMusic said:
ok will try
Click to expand...
Click to collapse
OMG IT BOOTED THANK YOU SO MUCH I THOUGHT I WAS F*D.
i clicked the thanks button for you
SamzWorldOfMusic said:
OMG IT BOOTED THANK YOU SO MUCH I THOUGHT I WAS F*D.
i clicked the thanks button for you
Click to expand...
Click to collapse
but wifi dosent seem to work
SamzWorldOfMusic said:
but wifi dosent seem to work
Click to expand...
Click to collapse
and now it works
SamzWorldOfMusic said:
and now it works
Click to expand...
Click to collapse
just to know
if you ever face wifi error the first thing we are doing is flashing the boot.img via fastboot
glad for you mate:good:
I tryed to boot CWM recovery for moto G (from this thread) but it didn't boot.
I have an european XT1032 (italian version), there are any fix for this device?
I tested the recovery with the following command:
For the 4.3 version
Code:
fastboot boot CWM43.img
For the 4.4 version
Code:
fastboot boot CWM44.img
but the device prompt the motorola screen and then reboot without boot the custom recovery.
1) is your bootloader unlocked?
2) are you on a stock JB or KK rom?
3) Do you have the same issue with TWRP?
Yes I unlocked the bootloader. I'm on Stock KitKat (4.4.2) and I have the same issue if I try to boot TWRP. I also tried to flash it on device but the issue remains.
Read the OP from the site where you downloaded CWM carefully again and compare it to that what you have quoted here.
With fastboot boot you are trying to flash cwm (recovery) as a kernel:crying:
And even then something is missing in your syntax (flash).
For flashing Kernel use:
fastboot flash boot filename.img
Click to expand...
Click to collapse
For flashing CWM use:
fastboot flash recovery filename.img
Click to expand...
Click to collapse
By the way, here is a good fastboot HowTo.
I already try to flash the recovery on device but it doesn't boot.
so i want to test it before flash on the phone
I already try to flash the recovery on device but it doesn't boot.
so i want to test it before flash on the phone
ecila said:
I already try to flash the recovery on device but it doesn't boot.
so i want to test it before flash on the phone
Click to expand...
Click to collapse
Sorry i don't understand you. You flashed the recovery already? But you want to test it before you flash? Now what?
What did you do exactly?
I think you messed up something while doing this thats why i am suggesting you to go back to Stock first.
Just flash it by typing "fastboot flash recovery recovery.img" and then restart bootloader and press volume down, and then volume up. You should boot into recovery.
mokkami said:
Sorry i don't understand you. You flashed the recovery already? But you want to test it before you flash? Now what?
What did you do exactly?
I think you messed up something while doing this thats why i am suggesting you to go back to Stock first.
Click to expand...
Click to collapse
Before write this post i already tried flash and then boot the custom recovery, but it doesnt boot.
So i restored the stock recovery,and now i want to test recovery (on the fly) without flash it.
You have to flash it. You can not use it "on the fly" to test it.
ecila said:
So i restored the stock recovery,and now i want to test recovery (on the fly) without flash it.
Click to expand...
Click to collapse
I'm really sorry, i just opend the specific Thread again and then i read this.
Then i rememberd this thread. So i'll update my mistake
Rusty! said:
If you want to try it out, use:
Code:
fastboot boot recovery.img
So that the system remains unchanged.
Click to expand...
Click to collapse
So you can use the CWM on the fly.
Hi, I recently bricked my Nexus 5 after attempting to load one kernel over another (I know now that what I did was stupid) and I'm now stuck in a bootloop. I believe I'm running on 5.1.1 and have no custom recovery anymore. Any ideas on how to fix this?
tgfols said:
Hi, I recently bricked my Nexus 5 after attempting to load one kernel over another (I know now that what I did was stupid) and I'm now stuck in a bootloop. I believe I'm running on 5.1.1 and have no custom recovery anymore. Any ideas on how to fix this?
Click to expand...
Click to collapse
Flash a custom recovery with fastboot.
Boot the phone to recovery.
Flash a kernel for your phone.
bitdomo said:
Flash a custom recovery with fastboot.
Boot the phone to recovery.
Flash a kernel for your phone.
Click to expand...
Click to collapse
How can I flash a recovery directly from fastboot? And then how will I flash a kernel to my phone if it isn't booting up? (I apologize for my lack of knowledge on the subject).
tgfols said:
How can I flash a recovery directly from fastboot? And then how will I flash a kernel to my phone if it isn't booting up? (I apologize for my lack of knowledge on the subject).
Click to expand...
Click to collapse
fastboot flash recovery recovery.img where recovery.img is the name of whatever recovery you download or rename the file to recovery. I like TWRP (Google it).
You can flash a boot.img (kernel) at the same time if you like or reboot to recovery and install a zip.
I accidentally flashed a radio instead of a kernel once and fixed it up easy peasy. If you can get to fastboot you can fix the phone just have to read up on it a bit.
Google "wugfresh nexus 5". He has a Nexus 5 toolkit all in one software. Should be able to help you out. I used it.
galakanokis said:
fastboot flash recovery recovery.img where recovery.img is the name of whatever recovery you download or rename the file to recovery. I like TWRP (Google it).
You can flash a boot.img (kernel) at the same time if you like or reboot to recovery and install a zip.
I accidentally flashed a radio instead of a kernel once and fixed it up easy peasy. If you can get to fastboot you can fix the phone just have to read up on it a bit.
Click to expand...
Click to collapse
Thank you, I'll be trying this soon. I appreciate your help.
Hi, I finally managed to port TWRP recovery, which boot on 9001D. This allows to do the permanent root, to modify the stock rom and possibly to install other roms.
Recovery is still unstable, I need help to make it stable!
Then, now Available for 9001D:
- TWRP
- Root
- Modded Stock Rom
drmad said:
Hi, I finally managed to port TWRP recovery, which boot on 9001D. This allows to do the permanent root, to modify the stock rom and possibly to install other roms.
Recovery is still unstable, I need help to make it stable!
Then, now Available for 9001D:
- TWRP
- Root
- Modded Stock Rom
Click to expand...
Click to collapse
*Could you provide download of your port*
I would like to try to boot it without flashing it
Thank you sir !
KevMetal said:
*Could you provide download of your port*
I would like to try to boot it without flashing it
Thank you sir !
Click to expand...
Click to collapse
hi, to try twrp you have to flash it,
to do this you must have the rooted device or you have to flash the firmware that I will give you
drmad said:
hi, to try twrp you have to flash it,
to do this you must have the rooted device or you have to flash the firmware that I will give you
Click to expand...
Click to collapse
Mmmm , better to use command
"fastboot boot recovery recovery.img"
If
"fastboot flash recovery recovery.img"
Can be dangerous if recovery isn't built from source and the port is bad ...if port works using "boot" command maybe try to flash it ...
But I found another recovery to use as a base for my port , thanks !
*Also my BOOTLOADER IS LOCKED BY VODAFONE*
So anyways my port will be useless...
KevMetal said:
Mmmm , better to use command
"fastboot boot recovery recovery.img"
If
"fastboot flash recovery recovery.img"
Can be dangerous if recovery isn't built from source and the port is bad ...if port works using "boot" command maybe try to flash it ...
But I found another recovery to use as a base for my port , thanks !
*Also my BOOTLOADER IS LOCKED BY VODAFONE*
So anyways my port will be useless...
Click to expand...
Click to collapse
Those commands does not work for me, let me know if they work for you
drmad said:
Those commands does not work for me, let me know if they work for you
Click to expand...
Click to collapse
Yes , they have worked for me in the past but on other phones. Your bootloader must be unlocked and remember to use the command without the quotation marks ..""
*You should also rename your recovery to recovery.img AND VERY IMPORTANTLY put it in your adb or fastboot tools root folder.
Then if you installed adb and run a command window BUT FROM INSIDE the tools folder where the recovery image is and run the following commands one by one it will work if your drivers are installed and your bootloader is unlocked
adb devices
*Return a serial number for your phone in window
adb reboot bootloader
*phone should boot into bootloader
fastboot oem unlock
*will unlock your bootloader if you press volume up
fastboot boot recovery recovery.img
*The recovery should boot ( if it boots and you can make a backup to SD card successful ly
fastboot flash recovery recovery.img
KevMetal said:
Yes , they have worked for me in the past but on other phones. Your bootloader must be unlocked and remember to use the command without the quotation marks ..""
*You should also rename your recovery to recovery.img AND VERY IMPORTANTLY put it in your adb or fastboot tools root folder.
Then if you installed adb and run a command window BUT FROM INSIDE the tools folder where the recovery image is and run the following commands one by one it will work if your drivers are installed and your bootloader is unlocked
adb devices
*Return a serial number for your phone in window
adb reboot bootloader
*phone should boot into bootloader
fastboot oem unlock
*will unlock your bootloader if you press volume up
fastboot boot recovery recovery.img
*The recovery should boot ( if it boots and you can make a backup to SD card successful ly
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
On other phones it works, on the 9001d it does not work ...
But I found an alternative method
drmad said:
On other phones it works, on the 9001d it does not work ...
But I found an alternative method
Click to expand...
Click to collapse
Which method ?
KevMetal said:
Which method ?
Click to expand...
Click to collapse
Insert the twrp into a complete firmware from flash with qfil
drmad said:
Insert the twrp into a complete firmware from flash with qfil
Click to expand...
Click to collapse
Mmm very interesting okay thanks for advice
KevMetal said:
Mmm very interesting okay thanks for advice
Click to expand...
Click to collapse
Let me know if your port of twrp is stable
Hi. Please help to install TWRP on 9001D or to get root
scarabbey said:
Hi. Please help to install TWRP on 9001D or to get root
Click to expand...
Click to collapse
You need to use a patched boot.img to get root on this device as there is no fastboot. There are guides online on how to use magisk to patch the boot.img and then flash that to your phone. That will give you permanent root after which you will be able to install twrp. If you flash twro without root or a patched boot it will remove it each time you boot up.
true_devil said:
You need to use a patched boot.img to get root on this device as there is no fastboot. There are guides online on how to use magisk to patch the boot.img and then flash that to your phone. That will give you permanent root after which you will be able to install twrp. If you flash twro without root or a patched boot it will remove it each time you boot up.
Click to expand...
Click to collapse
I'm able to install twrp with original boot.img and after I can get permanent root
drmad said:
Hi, I finally managed to port TWRP recovery, which boot on 9001D. This allows to do the permanent root, to modify the stock rom and possibly to install other roms.
Recovery is still unstable, I need help to make it stable!
Then, now Available for 9001D:
- TWRP
- Root
- Modded Stock Rom
Click to expand...
Click to collapse
Can you share the port here so others can try it?
Hola amigo tenes flash de 9001D luego de reparar F4 con Sigmakey quedo Brick
Greetings
I have this model
How do I flash/root/TWRP this phone? The instructions above are not very clear?
please help!
Code:
Warning! any damage done to your device is not my fault, use at your own risk!
This zip should be used mainly if you wiped system for some reason and didn't back up, its TA-1060 May patch system image + kernel + vendor files
Unlocked bootloader required!
TWRP
1. Boot into TWRP
2. Format /data partition in TWRP
3. Use 'adb push ta_1060_oreo_may_18.zip /sdcard/' in windows/linux/mac
4. Go to sdcard in TWRP and flash ta_1060_oreo_may_18.zip
5. Reboot to bootloader
6. use 'fastboot flash recovery recovery.bin' (Link bellow)
7. Optional: fastboot oem lock
8. reboot
9. on boot you will get encryption, click on the reset button when android loads
10. You will reboot into recovery then back into system, done
Fastboot
1. Extract zip file
2. flash system.img, boot.img, vendor.img in fastboot
3. fastboot reboot
Links:
Stock ROM zip May
Recovery image
Good luck
XDA:DevDB Information
[ROM][STOCK][TWRP][27/06/18]TA-1060 Stock Oreo 8.1, ROM for the Nokia 1
Contributors
sooti
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Created 2018-06-27
Last Updated 2018-06-27
So we can flash either through TWRP or Fastboot right?
Zeenat11 said:
So we can flash either through TWRP or Fastboot right?
Click to expand...
Click to collapse
I haven't tested fastboot but it should work. TWRP works 100%
Thank you very much, you are a life saver!!
I was stuck in a TWRP loop.
I tried flashing through TWRP but it didn't work but the fastboot method worked like a charm!
My phone is running again.
Thank you very much.
Is there any userdata.img available?
alexstarc said:
Thank you very much.
Is there any userdata.img available?
Click to expand...
Click to collapse
Nope but do you really need it? just format in fastboot or TWRP.
sooti said:
Nope but do you really need it? just format in fastboot or TWRP.
Click to expand...
Click to collapse
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
I wrote in the instructions...
If you get a password just enter a random one, then it will ask you to wipe the device, click ok and it will reboot to recovery and then wipe userdata and boot fine.
just make sure you flash the recovery.bin and not twrp before you wipe
alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
Same happened to me. I solved it by a hard reset via the stock recovery.
Make sure you flash the recovery.bin like Sooti said.
Wiping through twrp doesn't work.
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
A little warning.
It looks like the recovery.bin I took from another nokia 1 device doesn't match the checksum check which causes a failed during ota updates, please only flash this rom if you soft bricked your device.
If anyone can get me TA-1060 stock recovery image that should solve it. for now you can't update the phone until a fix is found
I have Nokia Ta 1066. Will this rom work on mine? Also I read somewhere Ta 1060 is single sim variant. What about the second sim?
Has anyone with TA 1066 tried it?
Thanks. Both methods work fine. Don't ask how I found out.....
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
coolboyforeva said:
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
Click to expand...
Click to collapse
I don't have stock recovery from our device i have from another variant of Nokia 1
Hey guys i have a TA-1056 and after unlocking bootloader and flashing TWRP it booted to recovery and came up encrypted, after looking around the only solution was to format data, afterwards when rebooting it always boots to recovery, i tried flashing this zip and i get the same issue and i can't find the stock ROM for the 1056 anywhere online, can anyone help me out? i really appreciate it
Kurajmo said:
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
Click to expand...
Click to collapse
got any custom roms?
Does Nokia 1 support DT2W?
Sir, is that possible to get a stock rom of TA 1056 ?
I have searched everywhere but whole thing available over net just left my phone bricked. All i need is a working rom source. Even if that’s a custom rom too to flash via sp flash tool. Thanks in advance
Can any please repost the firmware , the link isn't working