Related
i was really really stupid and decided to try and install darky's resurrected rom on my new sgh-t959v. After doing it and it not going past the 'installing csc' prompt i decided to try and mount a different pit. i got a working setup out of luck, but now my sim card doesn't work. i got a new sim card and still no signal. i only managed to write down the baseband version before messing it up like this. now that i've read that mixing a pit file from one region with a csc file from another is dangerous. i just need the stock pit csc and phone files. it's been driving me nuts because i just got this phone and all of a sudden can't use it. i've learned my lesson but i really need to fix it. i don't think darky's will work on mine since it's so new.
btw i found the source for my phone,(can't put link here because i don't have over 8 posts) my model and version are listed there. the only problem is i'm a noob at developing(getting into it) and can't compile all this stuff. is there a guide to compiling it? i was hoping to compile the source from that site and try to port it. how would i go about making the source into the pit csc and modem files?
sorry for such a ****ty problems guys. hope someone can help thanks in advance.
super buuuuump!!!
bump, i want my foooone herpaderp!
what's the difference between pit files that are 512, 803, 513? what's this number represent?
so i just tried to flash some other 'custom' rom that was perfect for my phone. i tried it with a different pit file that i thought would work. but now the device doesn't respond to anything! i turned it off and it won't turn on at all now not even to download mode. i'm freaking out what do i do!!!
welp i didn't want to wait. just to update everyone i took it to a local tech who flashed it to stock but couldn't fix the fudged bootloader. i messed it up when it failed a rom flash and i pulled it out in the middle of flashing. so i'm sending it back and getting another one by tuesday
yes, i need it too.
Same problem, anyway know where download this firmware???
No Custom ROM
A word to the wise: The Samsung sgh-t959v for t-mobile does not allow you to put a custom ROM. If anyone knows how to, please advice. I have a new sgh-t959v and don't want to make the same mistake of bricking it where "adb reboot download" command didn't even work because the phone died.
Hey guys i`ve recently managed to get an SGS 4G Vibrant ( i believe that i am at right place to seek for help ) , i have the T-Mobile version of the phone. I need help switching to different/better ROM, at this moment the phone uses the stock one ( or i believe so ). I`ve been tru the threads and saw that there are a lot of stuff posted about what you need to do/have to flash a rom, but i just cant understand the right order of doing the things.
If its posible can someone really quick just post the steps for the guide for flashing a ROM to the phone. I have previous expiriance with android phone and i am aware how thing go, just as i said i cant get the right order of puting all the thing at one place.
For the phone i used to have was like, first i had to install an stocklike ROM which had recovery, but before that i had to get some kind of software for LG that alowes to flash the rom via download mode. So is the same here? It would be awesome if someone can link or atleast type all the software and other thing i need to have installed to make this work. For now what i have is the USB drivers for Samsung.
Thanks in advance!
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V
sent from me
Ok, that helped, not sure how i missed it. I am gonna write down what i did so far, so you could see if i messed up something.
I rooted the phone via SuperOneClick 2.2, then i installed the SGS Kernel Flasher, and then flashed the kernel, my current phone was running an 2.3.7 android, so i used the Basic with a Twist`s kernel ( i hope i did it right ), and now the phone rebooted and some different boot screen apiared with some Robotic Chick speeking some stuff, BUT for now the phone load to there, it doesnt wannt to load.
So did i messed up something, or ....
Can you go into recovery by holding Volume Up+Volume Down while pressing the power button and as soon as the SGS 4G splash appears leaving the power button ?
If so and you can see CWM Ver. 5.0... then kernel was successfully flashed.
You shouldn't be getting a bootloop.
What ROM do you want to flash ? If you want to flash GB then I suggest Barebone/Valhalla of some kind.
If you want ICS - Go to the CM 9.1 thread and follow the instructions. After that you may change to AOKP or MIUI or all the rest of the ICS ROMs you wanna try.
invictos said:
SGS 4G Vibrant
Click to expand...
Click to collapse
This section is not for the Vibrant.
Check here: http://forum.xda-developers.com/forumdisplay.php?f=708
I am sorry I do not know how to get you back to where you started before flashing the wrong ROM.
Good luck
Well, it wasnt a bootloop, it just loaded to some point and stoped. Gladly still got the download mode and brought it back to normal to how it was. Thats why i came here to ask, `couse there are too much similiar sgs`s and stuff for them here, i just got confused whats what. Got to start from scratch anyway, at least i didnt bricked it
http://forum.xda-developers.com/showpost.php?p=21953587&postcount=1 <---- That's a post by Lumin 30 with a guide on how to get from stock to custom GB. If you want to get to ICS then use CWM 5.0.x.x.
So I have my HTC One S, I tried flashing a custom rom a while back and it just simply didn't work, i don't remember a lot of details this was a while ago but I've been doing a bunch of stuff recently to try and revert back to stock, I just want to use an RUU and go full 100% stock again, these are my getvar details in the picture.
So my question is, how the hell can I get this phone running again? Should I find my stock RUU or could someone walk me though how to possibly get back using a stock rom or something? Please note i have no access to anything, I can't even seem to access the phone storage via usb.
Also I attempted to use this RUU "RUU_Ville_U_ICS_40_S_BM_2.40.666.1_Radio_1.09ts.50.02.04_10.08g.50.04L_release_280275_signed"
before posting here, not sure if this tells anybody something but I figured I'd post it, if anyone needs anymore information please ask me and I'll try to find whatever you need.
I can help. Maybe.
HazyPreston93 said:
So I have my HTC One S, I tried flashing a custom rom a while back and it just simply didn't work, i don't remember a lot of details this was a while ago but I've been doing a bunch of stuff recently to try and revert back to stock, I just want to use an RUU and go full 100% stock again, these are my getvar details in the picture.
So my question is, how the hell can I get this phone running again? Should I find my stock RUU or could someone walk me though how to possibly get back using a stock rom or something? Please note i have no access to anything, I can't even seem to access the phone storage via usb.
Also I attempted to use this RUU "RUU_Ville_U_ICS_40_S_BM_2.40.666.1_Radio_1.09ts.50.02.04_10.08g.50.04L_release_280275_signed"
before posting here, not sure if this tells anybody something but I figured I'd post it, if anyone needs anymore information please ask me and I'll try to find whatever you need.
Click to expand...
Click to collapse
Hi HazyPreston93
I see that you replied to my post on my emergency thread.
I just wanted some information before I give instructions. What is the current state of your phone. You saw on the One S emergency thread what I have written. Just give me background information about your phone
Template:
s=on or off
Bootloader unlocked?
Is there a recovery installed?
Custom kernel?
S4 or S3 processor
Custom rom installed or attempted to install
If you need to feel free to contact me at [email protected]
griddn said:
Hi HazyPreston93
I see that you replied to my post on my emergency thread.
I just wanted some information before I give instructions. What is the current state of your phone. You saw on the One S emergency thread what I have written. Just give me background information about your phone
Template:
s=on or off
Bootloader unlocked?
Is there a recovery installed?
Custom kernel?
S4 or S3 processor
Custom rom installed or attempted to install
If you need to feel free to contact me at [email protected]
Click to expand...
Click to collapse
S=on
Bootloader is locked currently i believe
not sure about the kernel, i think the whole phone is erased so probably stock.
s4
no custom rom tried installing stock RUU
i think the recovery is twpr the phone is dead currently so I have to let it charge to find out for sure.
Hey guys, I'm having a pretty annoying issue with my Galaxy S3 (Verizon variant), and even though I'm pretty sure I know what the problem is, and that I screwed myself, I wanna know if there's another answer to what's going on.
As the title of this thing says, I tried installing Clockworkmod Recovery on my GS3, but I did it via the ROM Manager app, since I'd totally forgotten how to do it on my computer, and Odin 3.09 wouldn't use the .tar or .img files I tried using to install the damn thing (still haven't figured that out).
Anyway, I flashed the CWM file on the phone, installed it, and whenever I try booting into recovery, it says some unauthorized software is on the phone, and I need to take it to a Verizon store.
I'm pretty sure Verizon locked us out of our bootloader, and we need to unlock it before we can make mods like this, but, being that I haven't had a GS3 for two years, I didn't know that, and didn't look it up, like a n00b.
So, I think I just partially bricked my phone. So, yeah. That sucks.
Is there any way around this? Is there a way to revert back to the stock recovery mode, so I can try doing this whole thing again?
Some phone info:
It's the Verizon, I535 variant
Running 4.4.2, Kitkat
Build number: KOT49H.I535VRUDNE1
Any help would be appreciated.
Hi, thank you for using XDA Assist. The best place to look for answers and ask questions is in your device specific forum. Please see this,http://forum.xda-developers.com/verizon-lg-g3
Thread closed.
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Going back versions?
Ok, I'm pretty good on flashing ROMs and using TWRP. But I was thinking of trying a 5.1.1 Rom, I am rooted running just the stock Rom 6.01 currently. I have a SM-N900W8, so I assume I'll likely have to get the modem too depending on what ROM I choose.
My only concern is going backward, I don't know what kernel I might need to flash? Should be able to keep the answer simplistic in explanation, I just need the warnings and a basic checklist of what to do when going backward. And if I can complete this using just TWRP or whether I need to flash something with Odin or whether Flashfire might work.
Thanks in advance. Sorry I'm not a guy who has time to learn code. I try to donate if I'm going to use someone's work though. Just nice to have my phone run fast and smooth and be able to tinker...
Jetmerritt said:
Ok, I'm pretty good on flashing ROMs and using TWRP. But I was thinking of trying a 5.1.1 Rom, I am rooted running just the stock Rom 6.01 currently. I have a SM-N900W8, so I assume I'll likely have to get the modem too depending on what ROM I choose.
My only concern is going backward, I don't know what kernel I might need to flash? Should be able to keep the answer simplistic in explanation, I just need the warnings and a basic checklist of what to do when going backward. And if I can complete this using just TWRP or whether I need to flash something with Odin or whether Flashfire might work.
Thanks in advance. Sorry I'm not a guy who has time to learn code. I try to donate if I'm going to use someone's work though. Just nice to have my phone run fast and smooth and be able to tinker...
Click to expand...
Click to collapse
Hi
What do you mean by 'going backward'? Do you wanna downgrade your device from Marshmallow to Lollipop? If yes, refer to this thread.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Ok, if going back to a earlier version of Android, then flash the factory full ROM of that version through Odin, then flash custom ROM of same version. Got it, thanks. Sounds like the easiest way.
Jetmerritt said:
Ok, if going back to a earlier version of Android, then flash the factory full ROM of that version through Odin, then flash custom ROM of same version. Got it, thanks. Sounds like the easiest way.
Click to expand...
Click to collapse
Yeah. Welcome!
Regards,
PoseidonKing
Stuck N915G
Am using a N915G , it was rooted with CW recovery , since yesterday it would go in restart loop , so i went into recovery and did a reset , still the loop would not go , so i took into a service center they tries kies and it would intall lollipop but half way through it will show " erasing " and then go back to boot loop , now at this point when i re checked the phone there is no CW recovery , so i tried Odin with Marshmallow to flash the system , it shows PASS but during installation " System updating .. erasing " then goes back to reboot so i flashed new set of Pit files , but still the phone stays in boot loop , vibrates then goes off to loop , what am i doing wrong
Won't power on after normal power off.
Hi,
i mean; when i turn of the phone with normal shutdown menu, device power off normally.
But when i attempt to turn on device again, it won't turn on. nothing happens when i press or hold the power button.
only the way to turn on again, "plug a charge cable or usb cable"
after it detects the charge, and shows charging. after then i can turn on the device normal.
but, not possible to turn on without plug the cable once.
so; what can be my device's problem. (there is no another problem) except fast battery drain.
my opinion; humidity damage? or something like that.?
can any oxidation causes this problem?
please reply for help.
thanks.
Bump
Sent from my Motorola XT1080 using XDA Labs
Hello, I rooted my Samsung Galaxy Note Edge (N915T) Tmobile way back in 2014, I have since then forgot how to root again. I know that my phone is still rooted because I have SU.
My phone specs right now:
Bootloader: N915TUVU1ANJL
OS Version: KitKat 4.4.4
CPU: ARMv7-A (armeabi-v7a)
Kernel version: 3.10.0-2990579
I saw a post here in XDA about new Custom ROM (7.1.2 AOKP Nougat) and I would like to install custom ROM, and reading the instructions it states that it requires Bootloader 6.0.1 and Modem. I have no idea how to install bootloader and modem up to 6.0.1 on my phone. Kindly please guide me how to identify my current bootloader and how to upgrade up to 6.0.1. Thanks!
Hello,
I am using Odin v3.12.7 and I tried to select (twrp-3.0.2-0-tbltetmo.img) from Odin, but is not selectable because it does not have (.md5) or (.tar), where can I find a TWRP in those file formats?
What custom rom can i flush with my note edge sc-01g docomo japan,
Corrupt microsdcard and otg devices
Hi,
This is about my note edge N915G and what will follow has strangely happened with every kind of rom for the device stock rooted, aokp, customized stock, and slimroms.
What happens is
scard shows as corrupted after busybox/magisk7viper mods I mean the card is fine when I install busy box and magical and viper then in stall viper drivers and it is still good but when I reboot to activate the viper mods my card shows as corruption. I another thing that happens is when the card shows as corrupt, I I can try another card and still shows corrupt and strangely even the devices I connect through otg all show as corrupt. Ii think it is busy box which is needed for viper that does it, but am not sure.
Another guess is that maybe some embedded file on the phone has been deleted or corrupted and that is causing me the trouble. I have installed the Enhanced rom this evening and had set it up with closed root and magical. I it was all fine. I then I installed busy box using smart install and after that opened viper fx 2.5 and viper xhi=fi and each prompted to install drivers and they installed successfully and advised a reboot. It is after reboot that I opened my music player and found no songs which was be aise it is showing my card as corrupt. I strangely even if I reverse the process and uninstall viper drivers then viper apps and finally busybox it still does not change the status of the card. It is either that I install the rom again dirty or restore a system backup that was made while there were no add ons.
I would really appreciate if anyone can help figure this out as I do have the workaround of restoring system but it is tedious as I have to install all apps etc.
I would like to reiterate that this is not the kind of issue associated with Samsung phones in general where they are said to kill microsdcards. This is not the case and the card works flawlessly in a different phone which I did to check. My laptop too has no issues with same card it is a Samsung evo 64 gb card I'm using. Maybe they key is that even other as cards whether I put them in the card slot or in a card reader for otg it shows any card I use as corrupt and even my otg drives show up as corrupt. I think it is something I have never seen happening yet.
Thanks for reading this and for your suggestions and advice. I will look forward to your thoughts and inputs, knowledge and experience.
Regards
Centaur31
anybody install android 7 on note edge ?
please describe the method
i have been tried a lot to root the device but fail with error
in my phone in the developer setting there is no OEM unlock option
in all guide mentioned to this option
my phone model is: N915F
if possible please help me
At&t Samsung Note Edge N915A 6.0.1
Hi I'm a noob. Last phone I "jailbroke" was a IPhone 3gs. Could you link me in the right direction to root my Samsung note edge from At&t 6.0.1 a list of procedures would be great, also a list of downloads. Anything & Everything I need on my phone or my Laptop to complete the process. All input would be appreciated. I just paid a large chunk of $ to Samsung to have my screen replaced and I am the original owner of my device which I paid a lot of money for in 2014, so I would hate to brick my device. Thanks
Hello
I have Samsung Galaxy Note edge n915F and i want to to flash n915g stock rom in it
is it possible. .?
Or if possible any problem will occur. .?
Thanx in advance