HOW to GET back IMEI no.. - Moto G 2015 Q&A, Help & Troubleshooting

I got my new Jio sim and after some time I got a message of welcome by Jio sim and then after 2-3 min later my pH starts showing no sim card and imei no was nill
Plzz help....

Conspiracy??
You can try to follow the stock firmware flashing method but wipe and flash only the modem part. Hope that fixes it
Broadcasted from Zeta Reticuli

Gravemind2015 said:
Conspiracy??
You can try to follow the stock firmware flashing method but wipe and flash only the modem part. Hope that fixes it
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
Thx
I am using cm12.1 so can it be done by again flashing 12.1 or stock rom

Piyush Garg said:
I got my new Jio sim and after some time I got a message of welcome by Jio sim and then after 2-3 min later my pH starts showing no sim card and imei no was nill
Plzz help....
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/2015-moto-g/help/tuto-fastboot-erase-signal-t3451362#post68445534
OR
Try thishttp://forum.xda-developers.com/moto-g/help/info-moto-g-imei0-t2925970/post61725547#post61725547
:good:

Piyush Garg said:
Thx
I am using cm12.1 so can it be done by again flashing 12.1 or stock rom
Click to expand...
Click to collapse
Well, in the firmware files, the system.sparsechunk are essentially the stock android rom parts. Modem files are not included in standard ROMs. So you need to erase and re-flash radio modem files from the fastboot. No need to wipe current CM 12.1, but to have a greater chance of success, take a nandroid, do a full fastboot firmware flash and then restore the nandroid. Better to restore just /data and reflash ROM+Gapps+others and wipe /cache, dalvik/art.
Broadcasted from Zeta Reticuli

Related

No Signal [CM11S - 25R]

trying my luck here again..
hey guys, i've downgraded from CM11S 38R to 25R, but i don't have signal...
it's doesn't recognize my cellular network and yes the sim is in the right direction because i didn't had signal only after i've downgraded.
any suggestions?
heard it has something to do with modem.. tried to flash 44S modem/33R modem and nothing
Why don't you try flashing the whole 44s rom? or try calkulin's 44S?
gal_b said:
trying my luck here again..
hey guys, i've downgraded from CM11S 38R to 25R, but i don't have signal...
it's doesn't recognize my cellular network and yes the sim is in the right direction because i didn't had signal only after i've downgraded.
any suggestions?
heard it has something to do with modem.. tried to flash 44S modem/33R modem and nothing
Click to expand...
Click to collapse
firstly try to flash u stock rom image using fastboot flash method if it not worked then go to below steps
Have u checked u r IMEI is it ok? If no u have messed up with efs partation and there will be no IMEI so no network no signal
X Have u using custom recovery? If yes have u backed up u r efs partation before downgrading
There are Custom TWRP that have options to back up efs partation
If u have backup with efs then restore it all will be fine
If u don't have backup then there will be lots of problem
You have to go through tbese threads
http://forum.xda-developers.com/oneplus-one/general/fix-people-corrupt-efs-mobile-data-t2836389
http://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061
Or try to use this rom
http://forum.xda-developers.com/oneplus-one/development/rom-calkulins-oneplus-one-v1-0-t2810365
If nothing worked last will be
http://forum.xda-developers.com/oneplus-one/general/steps-how-to-recover-bad-imei-t3171452
walpanmad said:
firstly try to flash u stock rom image using fastboot flash method if it not worked then go to below steps
Have u checked u r IMEI is it ok? If no u have messed up with efs partation and there will be no IMEI so no network no signal
X Have u using custom recovery? If yes have u backed up u r efs partation before downgrading
There are Custom TWRP that have options to back up efs partation
If u have backup with efs then restore it all will be fine
If u don't have backup then there will be lots of problem
You have to go through tbese threads
http://forum.xda-developers.com/oneplus-one/general/fix-people-corrupt-efs-mobile-data-t2836389
http://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061
Or try to use this rom
http://forum.xda-developers.com/oneplus-one/development/rom-calkulins-oneplus-one-v1-0-t2810365
If nothing worked last will be
http://forum.xda-developers.com/oneplus-one/general/steps-how-to-recover-bad-imei-t3171452
Click to expand...
Click to collapse
i have IMEI, i have backup, i have TWRP.. ended up going on 38R.. amazing battery life

Problem idol 3 5.5

HI i have idol3 5.5 ,when i restore europe firmware 5.0.2-010 06 everyting is OK,and then phone will freeze and will randomly restart,i use TWRP to restore.,what's the problem,
*sorry for my bad English
When does the Idol freeze and reboot? After the first time the system boot, or after a while of booting?
Which partitions have you restored from TWRP and which ROM had you previously?
You need to provide further information, otherwise, it's difficult that someone could help you.
ciclolars said:
When does the Idol freeze and reboot? After the first time the system boot, or after a while of booting?
Which partitions have you restored from TWRP and which ROM had you previously?
You need to provide further information, otherwise, it's difficult that someone could help you.
Click to expand...
Click to collapse
after a while of botting work 2 minutes and then freeze and reboot ,i have been Stock rom for alcatel (5.0.2 010 001),when i'm going to install eu stock rom(5.0.2 010 06) first im going to wipe everyting without sd and usb otg and then im going restore system and boot image and then reboot ..
aleksandar.d123 said:
after a while of botting work 2 minutes and then freeze and reboot ,i have been Stock rom for alcatel (5.0.2 010 001),when i'm going to install eu stock rom(5.0.2 010 06) first im going to wipe everyting without sd and usb otg and then im going restore system and boot image and then reboot ..
Click to expand...
Click to collapse
Seems to be an app issue, otherwise wouldn't boot. I guess...
ciclolars said:
Seems to be an app issue, otherwise wouldn't boot. I guess...
Click to expand...
Click to collapse
so how i can solve it??
go to stock using alcatel mobile upgrade q 4.9.2
DallasCZ said:
go to stock using alcatel mobile upgrade q 4.9.2
Click to expand...
Click to collapse
i try,working,but when restore from twrp stock eu rom 006 ,or custom rom ex.cw the phone boot and then everyting ok after 2-3 min freeze and reboot ,when i restore from twrp stock rom 001 everyting is ok no freeze,no reboot,so what's the problem
and its the 010-06 firmware for your device? have you wiped cache and dalvik cache after restore and befor restore?
DallasCZ said:
and its the 010-06 firmware for your device? have you wiped cache and dalvik cache after restore and befor restore?
Click to expand...
Click to collapse
yes orginal stock rom for 6045y i have 6045y ,i have at the moment 010 01 ,i wipe everything without sd card and usb otg and the i go restore boot and system img and reboot
aleksandar.d123 said:
yes orginal stock rom for 6045y i have 6045y ,i have at the moment 010 01 ,i wipe everything without sd card and usb otg and the i go restore boot and system img and reboot
Click to expand...
Click to collapse
i ask if its for your region. And have you tried only to restore system? And of course you have to wipe cache/dalvik cache after restore!!!
DallasCZ said:
i ask if its for your region. And have you tried only to restore system? And of course you have to wipe cache/dalvik cache after restore!!!
Click to expand...
Click to collapse
I use at moment Macedonian stock rom version 5.0.2 010 01,i'm trying to install eu stock rom version 5.0.2 010 06 ,the restore file has boot and system image,i tried to restore system image and will boot everyting is ok and then will freezes and reboots
aleksandar.d123 said:
I use at moment Macedonian stock rom version 5.0.2 010 01,i'm trying to install eu stock rom version 5.0.2 010 06 ,the restore file has boot and system image,i tried to restore system image and will boot everyting is ok and then will freezes and reboots
Click to expand...
Click to collapse
there is no stock eu firmware all firmwares all divided into regions so you have to download firmware for your model and region, and as i wrote you have to wipe caxhe and dalvik cache after restore before reboot.
DallasCZ said:
there is no stock eu firmware all firmwares all divided into regions so you have to download firmware for your model and region, and as i wrote you have to wipe caxhe and dalvik cache after restore before reboot.
Click to expand...
Click to collapse
yes i do the wipe cache and dalvik cache and again reboots,so i download from xda backup from eu rom ,i downlaod from this linkhttp://forum.xda-developers.com/showpost.php?p=62006681&postcount=3
,and i download europe rom for all 6045y devices,and my friend has a problem like this ,i think the problem is on nvram,so how i can resett it??
aleksandar.d123 said:
yes i do the wipe cache and dalvik cache and again reboots,so i download from xda backup from eu rom ,i downlaod from this linkhttp://forum.xda-developers.com/showpost.php?p=62006681&postcount=3
,and i download europe rom for all 6045y devices,and my friend has a problem like this ,i think the problem is on nvram,so how i can resett it??
Click to expand...
Click to collapse
there is no stock eu firmware for god sake!! famewolf has bad description, but anyway restoring the backup can work, i havent tested. The latest firmware for your device you can get trough mobile upgrade q 4.9.2 windows app. Your region firmware canhave some modification we dont have and thats why maybe you got reboots.
And if you dont want to undetstand, i am out.
DallasCZ said:
there is no stock eu firmware for god sake!! famewolf has bad description, but anyway restoring the backup can work, i havent tested. The latest firmware for your device you can get trough mobile upgrade q 4.9.2 windows app. Your region firmware canhave some modification we dont have and thats why maybe you got reboots.
And if you dont want to undetstand, i am out.
Click to expand...
Click to collapse
i have version 4.8.7 of upgrade program so when i connect phone they write to me "idenrifying phone" and then freezes at 5 percent i tested for one hour and indetifying phone and nothing,so can you send me download link for 4.9.2
*sorry for my bad english
DallasCZ said:
there is no stock eu firmware for god sake!! famewolf has bad description, but anyway restoring the backup can work, i havent tested. The latest firmware for your device you can get trough mobile upgrade q 4.9.2 windows app. Your region firmware canhave some modification we dont have and thats why maybe you got reboots.
And if you dont want to undetstand, i am out.
Click to expand...
Click to collapse
i find it on xda topic, so it sends me the version is latest,i won't receive any update such as build 7SRA- UEA2
aleksandar.d123 said:
i find it on xda topic, so it sends me the version is latest,i won't receive any update such as build 7SRA- UEA2
Click to expand...
Click to collapse
no 7SRA-UEA2 is firmware for usa i think the european firmwares are labeled 010-xx.
DallasCZ said:
no 7SRA-UEA2 is firmware for usa i think the european firmwares are labeled 010-xx.
Click to expand...
Click to collapse
but i won't receive any update like"010-06" "010-05"

Q3000 no network after complete format n Flash.

I'm facing strange problem with my Q3000 after flashing custom ROM.
I will explain once again if looking at my problem can anyone provide me solution.
1) I tried to flash custom rom and while flash something happened n my phone goes off.
2) I format EMMC using SP_Flash_Tool_v5.1420.03 and then flash stock ROM KK.
3) After flashing Phone boot but with no IMEI no and no network.
4) I then used MTK Droid Root & Tools V2.5.3 and replace with correct IMEI no. and confirmed using softwares as well as *#06#
5) but still no network.
6) I do Memory Test using SP_Flash_Tool_v5.1420.03 and found ERROR: NAND Flash was not detected!
Please help in resolving this issue. I tried all possible help from this forum like flashing stock ROM JB n KK but no luck.
shinde_bharat said:
I'm facing strange problem with my Q3000 after flashing custom ROM.
I will explain once again if looking at my problem can anyone provide me solution.
1) I tried to flash custom rom and while flash something happened n my phone goes off.
2) I format EMMC using SP_Flash_Tool_v5.1420.03 and then flash stock ROM KK.
3) After flashing Phone boot but with no IMEI no and no network.
4) I then used MTK Droid Root & Tools V2.5.3 and replace with correct IMEI no. and confirmed using softwares as well as *#06#
5) but still no network.
6) I do Memory Test using SP_Flash_Tool_v5.1420.03 and found ERROR: NAND Flash was not detected!
Please help in resolving this issue. I tried all possible help from this forum like flashing stock ROM JB n KK but no luck.
Click to expand...
Click to collapse
Format and flash this rom by sp flash tools. http://storage.googleapis.com/otas/2014/Smartphones/Aquaris_5.7/2.0.0-20140912-0911-5.7-bq-FW.rar
drsarkar said:
Format and flash this rom by sp flash tools. http://storage.googleapis.com/otas/2014/Smartphones/Aquaris_5.7/2.0.0-20140912-0911-5.7-bq-FW.rar
Click to expand...
Click to collapse
Thanks for quick reply. I tried this but still no network.
shinde_bharat said:
I'm facing strange problem with my Q3000 after flashing custom ROM.
I will explain once again if looking at my problem can anyone provide me solution.
1) I tried to flash custom rom and while flash something happened n my phone goes off.
2) I format EMMC using SP_Flash_Tool_v5.1420.03 and then flash stock ROM KK.
3) After flashing Phone boot but with no IMEI no and no network.
4) I then used MTK Droid Root & Tools V2.5.3 and replace with correct IMEI no. and confirmed using softwares as well as *#06#
5) but still no network.
6) I do Memory Test using SP_Flash_Tool_v5.1420.03 and found ERROR: NAND Flash was not detected!
Please help in resolving this issue. I tried all possible help from this forum like flashing stock ROM JB n KK but no luck.
Click to expand...
Click to collapse
make sure all drivers must install & backup ur imei before doing anything
1. press power & vol down button (if phone doesn't detect)
format whole flash using sptool ...in format tab
then flash stock rom
if no imei error occur restore ur imei from backup
2. if no sim /no network error occur in custom rom
flash only sec_ro file using sptools
then network comes & then restore imei from backup
xolo q3000 full stock rom
http://forum.xda-developers.com/q3000/orig-development/xolo-q3000-kitkat-4-4-2-007-rom-t3080902
shinde_bharat said:
Thanks for quick reply. I tried this but still no network.
Click to expand...
Click to collapse
Imei?
Sujay95 said:
Imei?
Click to expand...
Click to collapse
yes i reentered the IMEI using engineering mode but still no luck.
Have you recovered???

Switching back to lollipop

Hey everyone,
Sorry for simple question.
I am currently on 6.0.1 custom rom on my XT1550
Can I directly flash snapshot of cm12? I mean getting back to lollipop?
Or do I have to flash bootloader first? Can anyone help me?
Yes, u can switch back. Before that wipe everything including internal memory
You can clean flash as said above, in addition to that no need of downgrading the bootloader,the current one should be fine as you are trying to flash a custom rom.
Broadcasted from Zeta Reticuli
samir.saurav said:
Yes, u can switch back. Before that wipe everything including internal memory
Click to expand...
Click to collapse
Thank you bro. Can you suggest me the best lollipop rom?
sharmasrb said:
Thank you bro. Can you suggest me the best lollipop rom?
Click to expand...
Click to collapse
Cm12.1 snapshot is very stable and smooth.
samir.saurav said:
Cm12.1 snapshot is very stable and smooth.
Click to expand...
Click to collapse
Thank you for replying. Also I saw an optimized stock 5.1.1 rom for MOTOG3 but it was mentioned to flash modem. But you told me just flashing the rom was enough! Sorry I'm in doubt. Do I have to flash modem each time downgrading to lollipop roms?
sharmasrb said:
Thank you for replying. Also I saw an optimized stock 5.1.1 rom for MOTOG3 but it was mentioned to flash modem. But you told me just flashing the rom was enough! Sorry I'm in doubt. Do I have to flash modem each time downgrading to lollipop roms?
Click to expand...
Click to collapse
Unless your phone came with marshmallow, or you upgraded it via ota to marshmallow, or used fastboot guide to flash marshmallow files, then you would already be running lollipop modem. It should work fine IMO.
In case rom fails to boot or network is lost you can use lost101's fastboot firmware flashing guide to flash lollipop modem (but in that case I recommend you to ask in the respective threads to be more clear).
Broadcasted from Zeta Reticuli
Gravemind2015 said:
Unless your phone came with marshmallow, or you upgraded it via ota to marshmallow, or used fastboot guide to flash marshmallow files, then you would already be running lollipop modem. It should work fine IMO.
In case rom fails to boot or network is lost you can use lost101's fastboot firmware flashing guide to flash lollipop modem (but in that case I recommend you to ask in the respective threads to be more clear).
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
You're really helpful. Thank you. One last thing, will flashing modem wipe my internal storage? I intend to keep my internal storage files intact after flashing. Or it is compulsory to wipe internal storage as well?
Sent from my MotoG3 using XDA-Developers mobile app
sharmasrb said:
You're really helpful. Thank you. One last thing, will flashing modem wipe my internal storage? I intend to keep my internal storage files intact after flashing. Or it is compulsory to wipe internal storage as well?
Sent from my MotoG3 using XDA-Developers mobile app
Click to expand...
Click to collapse
If you are going to flash cm12.1 snapshot, no need to flash anything... Just rom and gapps. As far as internal memory is concerned, its not necessary to wipe.
sharmasrb said:
You're really helpful. Thank you. One last thing, will flashing modem wipe my internal storage? I intend to keep my internal storage files intact after flashing. Or it is compulsory to wipe internal storage as well?
Sent from my MotoG3 using XDA-Developers mobile app
Click to expand...
Click to collapse
Well, flashing modem should not format internal, but i advise to backup just in case prior to attempting.
If it's a .zip file then most probably it won't touch internal storage . If you are using fastfoot method then only command fastboot flash modem one should be used.
Flashing internal is advised in case of rom switch, a hardware level firmware like a modem shouldn't need it. (Others can correct me, if wrong)[emoji16]
Broadcasted from Zeta Reticuli

Error 7 flashing custom rom

Hi all,
I've been trying to get resurrection remix working on my honor 8 for a few days without luck. I've tried following the instructions in the OP as well as flashing update.zip/ update_full_hw_usa.zip and I tired the vendor.zip from the LOS thread.
Every time I try and flash the rom (it also happens if I try the LOS rom) TWRP gives me error 7.. I believe this means incompatible device?
I have been formatting the partition before flashing as well as clearing dalvik cache and factory resetting. My device is the Chinese model (AL10) so I think that's why I'm having issues..
Perhaps I need to flash an international version of Huawei's software first?
Any help appreciated!
JoshSnitz said:
Hi all,
I've been trying to get resurrection remix working on my honor 8 for a few days without luck. I've tried following the instructions in the OP as well as flashing update.zip/ update_full_hw_usa.zip and I tired the vendor.zip from the LOS thread.
Every time I try and flash the rom (it also happens if I try the LOS rom) TWRP gives me error 7.. I believe this means incompatible device?
I have been formatting the partition before flashing as well as clearing dalvik cache and factory resetting. My device is the Chinese model (AL10) so I think that's why I'm having issues..
Perhaps I need to flash an international version of Huawei's software first?
Any help appreciated!
Click to expand...
Click to collapse
What version of TWRP did you install?
JoshSnitz said:
Hi all,
I've been trying to get resurrection remix working on my honor 8 for a few days without luck. I've tried following the instructions in the OP as well as flashing update.zip/ update_full_hw_usa.zip and I tired the vendor.zip from the LOS thread.
Every time I try and flash the rom (it also happens if I try the LOS rom) TWRP gives me error 7.. I believe this means incompatible device?
I have been formatting the partition before flashing as well as clearing dalvik cache and factory resetting. My device is the Chinese model (AL10) so I think that's why I'm having issues..
Perhaps I need to flash an international version of Huawei's software first?
Any help appreciated!
Click to expand...
Click to collapse
Bro u should be in version of emui 5 and flash the twrp openkirin edtion nougat one .
1,Then format data > type yes and reboot again to twrp
2.flash the full rros 600+ mb zip and over it flash rros latest one and done . reboot to system.
If you experience random reboots format the data once.
Rommco05 said:
If u have newest twrp, u do format data twice? Once and after reboot recovery and make second
Click to expand...
Click to collapse
Yep, tried that!
venugopalu007 said:
Bro u should be in version of emui 5 and flash the twrp openkirin edtion nougat one .
1,Then format data > type yes and reboot again to twrp
2.flash the full rros 600+ mb zip and over it flash rros latest one and done . reboot to system.
If you experience random reboots format the data once.
Click to expand...
Click to collapse
I'm not currently on that version of twrp - I did try it but without luck - I'll try it again tonight.
I think I have the correct rr zip, it's in the op of the thread and is over 600mb as you say.
Thanks!
JoshSnitz said:
I'm not currently on that version of twrp - I did try it but without luck - I'll try it again tonight.
I think I have the correct rr zip, it's in the op of the thread and is over 600mb as you say.
Thanks!
Click to expand...
Click to collapse
You are welcome ,
Rommco05 said:
U sure u do format data instead factory reset?
Click to expand...
Click to collapse
Yep, like I said, I've done both in combination and again after rebooting
Does anyone know if I need to decrypt manually or is this done automatically by flashing?
Sorry I'm not sure what f2fs is..
So I am definitely on openkirin's TWRP 3.1.1-1-frd and I cannot even format or factory reset. When I try to format data I get the message:
mkfs.f2fs -t 0 /dev/block/mmcblk0p49 process ended with ERROR: 255
Unable to wipe Data.
Unable to format to remove encryption
When I try and factory reset I get the following:
Failed to mount '/data' (Device or resource busy)
Maybe my issue is encryption?
JoshSnitz said:
So I am definitely on openkirin's TWRP 3.1.1-1-frd and I cannot even format or factory reset. When I try to format data I get the message:
mkfs.f2fs -t 0 /dev/block/mmcblk0p49 process ended with ERROR: 255
Unable to wipe Data.
Unable to format to remove encryption
When I try and factory reset I get the following:
Failed to mount '/data' (Device or resource busy)
Maybe my issue is encryption?
Click to expand...
Click to collapse
Yes it was encryption issue , after reboot your encryption will be removed.and you can format the data without any errors
I think I'd corrupted the data partition as its size was shown as 0. After fixing it the ROM flashed! Only thing now is it says no sim.. I'm using a 4g/LTE sim card
I've restored a backup to EMUI and camera doesn't work =/
I've also noticed something interesting; on the back of my phone it says AL10, EMUI about reports it as AL00 but RR rom also has AL10.. I think my version may have something to do with the sim issue? I see a lot of people saying you need to update officially first but mine has none available..
Rommco05 said:
Camera don't work because u restore twrp backup, right?
Click to expand...
Click to collapse
Yeah, why does that happen?
Rommco05 said:
Relay don't know, I have same issue after retore twrp backup you need to flash full firmware for bring camera back
Click to expand...
Click to collapse
No worries, cheers.
Any ideas on getting my sim card to work? I'm thinking of rolling back my firmware and trying again (as I'm currently on the NRD90M test-build)..
JoshSnitz said:
No worries, cheers.
Any ideas on getting my sim card to work? I'm thinking of rolling back my firmware and trying again (as I'm currently on the NRD90M test-build)..
Click to expand...
Click to collapse
Bro got this in last night whrn flashing the stock firmwares, just before flashing the firmwares flash over los 14.1 zip , it is working fine now , i think it was due to broken vendor , it was fixed by los zip
venugopalu007 said:
Bro got this in last night whrn flashing the stock firmwares, just before flashing the firmwares flash over los 14.1 zip , it is working fine now , i think it was due to broken vendor , it was fixed by los zip
Click to expand...
Click to collapse
Sorry, I don't know if I understand - you just flashed the LOS rom and it fixed it or you needed to flash a fixed vendor.zip?
I restored a backup of EMUI and sim card is working now so it seems it's only on LOS and RR roms that is doesn't work
JoshSnitz said:
Sorry, I don't know if I understand - you just flashed the LOS rom and it fixed it or you needed to flash a fixed vendor.zip?
I restored a backup of EMUI and sim card is working now so it seems it's only on LOS and RR roms that is doesn't work
Click to expand...
Click to collapse
sorry for my English, last night I got the same issue(cameras not working in emui ) when I flash the stock firmware the camera is not worked even after several clean flashes, then I encountered an error of /vendor is broken.
so I just fixed it by flashing 1. los 14.1 and over it i flashed the stock firmware ,it worked , cameras working now in emui
venugopalu007 said:
sorry for my English, last night I got the same issue(cameras not working in emui ) when I flash the stock firmware the camera is not worked even after several clean flashes, then I encountered an error of /vendor is broken.
so I just fixed it by flashing 1. los 14.1 and over it i flashed the stock firmware ,it worked , cameras working now in emui
Click to expand...
Click to collapse
No problems, I appreciate your help! I understand - I did have broken camera before and it fixed when I flash a fresh zip. I think it is broken now because I restored a backup in twrp. I'm just not sure how to get my sim card working in RR or LOS roms..
JoshSnitz said:
No problems, I appreciate your help! I understand - I did have broken camera before and it fixed when I flash a fresh zip. I think it is broken now because I restored a backup in twrp. I'm just not sure how to get my sim card working in RR or LOS roms..
Click to expand...
Click to collapse
Which model is your device? Not working sims? Chinese one ?

Categories

Resources