Related
So, yesterday I decided to upgrade my Android version from ICS to JB. I forgot to do a factory reset first, and now I can barely use the tab. I'm guessing it's laggy and slow because it has only 200~mb of space only. Buuut, the huge problem is that I can't reboot. The button for the last comfirmation is dead. I click it, but nothing happens.
Anyone had a similar experience? The device is not rooted.
Hekikai said:
So, yesterday I decided to upgrade my Android version from ICS to JB. I forgot to do a factory reset first, and now I can barely use the tab. I'm guessing it's laggy and slow because it has only 200~mb of space only. Buuut, the huge problem is that I can't reboot. The button for the last comfirmation is dead. I click it, but nothing happens.
Anyone had a similar experience? The device is not rooted.
Click to expand...
Click to collapse
reflash correctly
qazmed said:
reflash correctly
Click to expand...
Click to collapse
What do you mean, exactly?
Hekikai said:
What do you mean, exactly?
Click to expand...
Click to collapse
download the rom on ur pc and flash it using odin
qazmed said:
download the rom on ur pc and flash it using odin
Click to expand...
Click to collapse
I second quazmed's info.. Something went wrong with the install.. I'm guessing you upgraded through Samsung kies? Or did you get a notification to upgrade? Either way its a messed up system and you should use Odin to reflash the firmware.
Tip. If you just hold the power button long enough, the device will reboot that's true on any Samsung device I believe..
So I have a VZW S3 on NE1 rooted and running xposed. I am not sure what module it was that I installed but my phone is now stuck with the SystemUI constantly crashing to the point of me being unable to use the phone. Then I, like a moron, Unrooted my phone thinking that would stop the issue. It didn't. I do have usb debugging enabled and my phone connects to the computer. Can I just boot into recovery and use the Xposed-disabler-recovery zip to fix this? will that wreck my phone since VZW is so annoying? Would that wipe my memory? And if that doesn't work what else could I do except pull everything I can off my phone and and reflash the entire thing using Odin?
Thanks a million!
J CGPhones said:
So I have a VZW S3 on NE1 rooted and running xposed. I am not sure what module it was that I installed but my phone is now stuck with the SystemUI constantly crashing to the point of me being unable to use the phone. Then I, like a moron, Unrooted my phone thinking that would stop the issue. It didn't. I do have usb debugging enabled and my phone connects to the computer. Can I just boot into recovery and use the Xposed-disabler-recovery zip to fix this? will that wreck my phone since VZW is so annoying? Would that wipe my memory? And if that doesn't work what else could I do except pull everything I can off my phone and and reflash the entire thing using Odin?
Thanks a million!
Click to expand...
Click to collapse
There is an option in xposed to uninstall.
buhohitr said:
There is an option in xposed to uninstall.
Click to expand...
Click to collapse
Right but I can't even get past my homescreen at the moment
J CGPhones said:
Right but I can't even get past my homescreen at the moment
Click to expand...
Click to collapse
OK, I see then just flash the xposed-disabled-recovery.zip using custom recovery. If you locked with only stock recovery, you may need to do a factory reset,
buhohitr said:
OK, I see then just flash the xposed-disabled-recovery.zip.
Click to expand...
Click to collapse
From stock recovery? That won't make my phone trip the fuse for modifying the system? By the way Thank you SO much for replying.
J CGPhones said:
From stock recovery? That won't make my phone trip the fuse for modifying the system? By the way Thank you SO much for replying.
Click to expand...
Click to collapse
I accidentally hit send before finished typing, if you only have stock then a factory reset probably your best bet,
buhohitr said:
I accidentally hit send before finished typing, if you only have stock then a factory reset probably your best bet,
Click to expand...
Click to collapse
Sigh that's what I was afraid of. Oh well I'll get going on pulling all of my files off. Thanks so much for all your help.
Hey guys. I had flashed gpe edition on my XT1032 to get lollipop and everythign was fine. Yesterday I decided to get back to stock in order to wait for 5.1 but since then i have messed up everything in my phone. The point in wich i am now is that the phone wont boot and will be stuck in bootloader warning screen and when in fastboot adb wont recognize my phone which means i can do nothing to flash a new rom or anything. Guys please help i really am desperate and i have tried everything.
StanEzio said:
Hey guys. I had flashed gpe edition on my XT1032 to get lollipop and everythign was fine. Yesterday I decided to get back to stock in order to wait for 5.1 but since then i have messed up everything in my phone. The point in wich i am now is that the phone wont boot and will be stuck in bootloader warning screen and when in fastboot adb wont recognize my phone which means i can do nothing to flash a new rom or anything. Guys please help i really am desperate and i have tried everything.
Click to expand...
Click to collapse
If it says AP Fastboot Flash Mode at the very top, you need to work with fastboot tool, not adb. They're not the same.
riding1 said:
If it says AP Fastboot Flash Mode at the very top, you need to work with fastboot tool, not adb. They're not the same.
Click to expand...
Click to collapse
That's what it says but how do i work with fastboot? The sites and the guides i have searched nothing works. Could you explain to me what i have to do or refer me to another guide probably?
StanEzio said:
That's what it says but how do i work with fastboot? The sites and the guides i have searched nothing works. Could you explain to me what i have to do or refer me to another guide probably?
Click to expand...
Click to collapse
What OS are you on?
riding1 said:
What OS are you on?
Click to expand...
Click to collapse
8.1. So i tried what you said (kinda figured it out) and everything seems to be working out just fine. thanks a lot. The only thing i notice is something wrong with the screen, a line which goes from top to bottom of the screen every other second
StanEzio said:
8.1. So i tried what you said (kinda figured it out) and everything seems to be working out just fine. thanks a lot. The only thing i notice is something wrong with the screen, a line which goes from top to bottom of the screen every other second
Click to expand...
Click to collapse
Great. Can't help you with the lines - maybe look at other roms.
riding1 said:
Great. Can't help you with the lines - maybe look at other roms.
Click to expand...
Click to collapse
Thanks a lot.
StanEzio said:
8.1. So i tried what you said (kinda figured it out) and everything seems to be working out just fine. thanks a lot. The only thing i notice is something wrong with the screen, a line which goes from top to bottom of the screen every other second
Click to expand...
Click to collapse
The lines are due to the fact that you have a lollipop bootloader with a Kit Kat ROM. Upgrade to stock 5.02 or the latest CM12 and the lines will go away, except possibly in custom recovery. No lines if running stock recovery.
audit13 said:
The lines are due to the fact that you have a lollipop bootloader with a Kit Kat ROM. Upgrade to stock 5.02 or the latest CM12 and the lines will go away, except possibly in custom recovery. No lines if running stock recovery.
Click to expand...
Click to collapse
Thanks for the tip though it stoped on its own
StanEzio said:
Thanks for the tip though it stoped on its own
Click to expand...
Click to collapse
If you're running Kit Kat, it will stop if you lock and unlock the phone using the power button. If you restart the phone or your boot into recovery, the lines will reappear until your lock and re-lock again.
I flashed TWRP and unlocked bootloader, I am on mha-l29c636b158. How can I return to completely stock? I want to receive updates via ota because I read that there is a new update to fix the touch screen not being responsive. Or is there a flashable stock zip update I can flash?
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page31
Jaimesco12 said:
I flashed TWRP and unlocked bootloader, I am on mha-l29c636b158. How can I return to completely stock? I want to receive updates via ota because I read that there is a new update to fix the touch screen not being responsive. Or is there a flashable stock zip update I can flash?
Click to expand...
Click to collapse
I spent that past two days rooting and flashing the one rom I could. Had to ignore some Chinese. I am USA 567B167. Got into trouble a number of times. This phone is funky compared to all the rooting I have done. I booted into erocovery, downloaded stock 2GB, wiped and was back to current stock without issue. It bootlooped if I didn't hard reset and wipe cache.
gm007 said:
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page31
Click to expand...
Click to collapse
Will I be able to receive otas?
rndchef said:
I spent that past two days rooting and flashing the one rom I could. Had to ignore some Chinese. I am USA 567B167. Got into trouble a number of times. This phone is funky compared to all the rooting I have done. I booted into erocovery, downloaded stock 2GB, wiped and was back to current stock without issue. It bootlooped if I didn't hard reset and wipe cache.
Click to expand...
Click to collapse
So you just booted to erecovery and from there it automatically downloaded the stock firmware?
You can return stock by use dload update.
Jaimesco12 said:
So you just booted to erecovery and from there it automatically downloaded the stock firmware?
Click to expand...
Click to collapse
yes. I did it twice. that is how many times I got into trouble and was the only solution. It worked great as it gives you the ability to log into wifi with a keyboard present to put in the password, then downloads the stock current rom and flashes it. You have to format data and wipe cache yourself.
Miss Wugfresh root tool. Get you out of any trouble.
It says getting package info failed in erecovery
rndchef said:
yes. I did it twice. that is how many times I got into trouble and was the only solution. It worked great as it gives you the ability to log into wifi with a keyboard present to put in the password, then downloads the stock current rom and flashes it. You have to format data and wipe cache yourself.
Miss Wugfresh root tool. Get you out of any trouble.
Click to expand...
Click to collapse
any ideas?
Jaimesco12 said:
any ideas?
Click to expand...
Click to collapse
Erecovery only work for Chinese firmware.
Use the guide above and yes you can receive ota.
I also received the same message. Getting into recovery was inconsistent for me even with TWRP. Sometimes it would do the auto downloaded and fail thing and other times it would go into TWRP. You need to get where you have three choices and pick erocovery and push the start button. This brings up the restore ability. Worked perfect on the USA model.
rndchef said:
I also received the same message. Getting into recovery was inconsistent for me even with TWRP. Sometimes it would do the auto downloaded and fail thing and other times it would go into TWRP. You need to get where you have three choices and pick erocovery and push the start button. This brings up the restore ability. Worked perfect on the USA model.
Click to expand...
Click to collapse
Do you say that you recovered your phone from erecovery? For usa model?
gm007 said:
Do you say that you recovered your phone from erecovery? For usa model?
Click to expand...
Click to collapse
Yes. Twice. Once to get off of HRT rom that was wonky and another to remove root because I lost Google apps. All accidents and was grateful to discover erecovery put me back on the current B167 version stock.
rndchef said:
Yes. Twice. Once to get off of HRT rom that was wonky and another to remove root because I lost Google apps. All accidents and was grateful to discover erecovery put me back on the current B167 version stock.
Click to expand...
Click to collapse
Are you sure ur not using a paid service?
That's a good news, that was only possible for Chinese firmware,hope they extend it to all regions.
gm007 said:
Are you sure ur not using a paid service?
That's a good news, that was only possible for Chinese firmware,hope they extend it to all regions.
Click to expand...
Click to collapse
Completely positive. It happened by accident because I got in a bad place with HRT rom. Came out completely stock and current when no upgrade need. Then I rooted stock and somehow lost gapps including keyboard. Did it again and back to stock. All in erecovery. No other programs or files. It did a 2.5GB download, flashed in Emui and rebooted like when I bought it.
rndchef said:
Completely positive. It happened by accident because I got in a bad place with HRT rom. Came out completely stock and current when no upgrade need. Then I rooted stock and somehow lost gapps including keyboard. Did it again and back to stock. All in erecovery. No other programs or files. It did a 2.5GB download, flashed in Emui and rebooted like when I bought it.
Click to expand...
Click to collapse
Sorry for the no noob question: I just got my mate 9 and unlocked bootloader and rooted it. Recovery is TWRP 3.0.2-2.
Where do i find this erecovery? Couldn't see any download option in TWRP and even Google didn't know that term. Could anybody please explain step by step how to revert to stock (for the only sake of getting OTAs) once the phone has unlocked bootloader and is rooted using the method from xda with modified boot.img?
Or is it even possible to take OTAs while being rooted with system read only? On my previous phone, the Asus Zenfone 2 this was possible.
Thanks a lot
itenos said:
Sorry for the no noob question: I just got my mate 9 and unlocked bootloader and rooted it. Recovery is TWRP 3.0.2-2.
Where do i find this erecovery? Couldn't see any download option in TWRP and even Google didn't know that term. Could anybody please explain step by step how to revert to stock (for the only sake of getting OTAs) once the phone has unlocked bootloader and is rooted using the method from xda with modified boot.img?
Or is it even possible to take OTAs while being rooted with system read only? On my previous phone, the Asus Zenfone 2 this was possible.
Thanks a lot
Click to expand...
Click to collapse
Connect ur phone to usb,and boot ur phone while holding volume up.
Please report back if erecovery recovered ur phone.
gm007 said:
Connect ur phone to usb,and boot ur phone while holding volume up.
Please report back if erecovery recovered ur phone.
Click to expand...
Click to collapse
Thanks for the quick answer. Let me clearify what I understood : this erecovery is available only on the PC?
So basically I wait in rooted state until I receive the next OTA, don't take it but switch off the phone.
Then connect it to the PC and boot it up by holding the volume up + power key.
Then what happens exactly?
Sent from my MHA-L29 using Tapatalk
itenos said:
Thanks for the quick answer. Let me clearify what I understood : this erecovery is available only on the PC?
So basically I wait in rooted state until I receive the next OTA, don't take it but switch off the phone.
Then connect it to the PC and boot it up by holding the volume up + power key.
Then what happens exactly?
Click to expand...
Click to collapse
Booting the phone while plugged and with volume up will take you to erecovery on ur phone.
There you connect to wifi and the firmware get downloaded into ur phone
gm007 said:
Booting the phone while plugged and with volume up will take you to erecovery on ur phone.
There you connect to wifi and the firmware get downloaded into ur phone
Click to expand...
Click to collapse
Ah ok, this erecovery is still available on my phone even if I already flashed a custom recovery, right?
Then after downloading the firmware, erecovery will flash it and overwrite root and lock my bootloader again, correct?
Sent from my MHA-L29 using Tapatalk
Im using Huawei Honor 4c running OS v4.4.2. Now I want to update my device OS with v6.0 EMUI 4. I found one on official website but with different build number. My device build number is V100R001C185B130 but firmware on website has build number C185B503. Will there be any issue if I upgrade firmware?
Also do I have need to first upgrade from Kitkat to Lollipop and then Marshmallow, or I can directly upgrade from Kitkat to Marshmallow?
I'm wishing to upgrade official firmware availabe on Huawei website.
If the firmware is wrong the update will fail and device will stay in previous state.
Trying to go straight to Marshmallow won't cause any issues, update will fail before starting if it doesn't work.
keikari said:
If the firmware is wrong the update will fail and device will stay in previous state.
Trying to go straight to Marshmallow won't cause any issues, update will fail before starting if it doesn't work.
Click to expand...
Click to collapse
Okay, thanks for your reply. I will report you after flashing.
And can I upgrade it putting in device storage, but not in external sd card?
asdkazmi said:
Okay, thanks for your reply. I will report you after flashing.
And can I upgrade it putting in device storage, but not in external sd card?
Click to expand...
Click to collapse
No idea. But trying it won't cause problems.
I tied to upgrade firmware both normally and force upgrade but it gives me error
"Version check fail"
keikari said:
No idea. But trying it won't cause problems.
Click to expand...
Click to collapse
first I tried with Marshmallow but it gives me error "Version check failed". Then I tried to upgrade it into Lollipop, at start in upgrade it work fine but at the end of updating, it stucks, I can't update. It always stuck to end of updating.
asdkazmi said:
first I tried with Marshmallow but it gives me error "Version check failed". Then I tried to upgrade it into Lollipop, at start in upgrade it work fine but at the end of updating, it stucks, I can't update. It always stuck to end of updating.
Click to expand...
Click to collapse
Does it give some error and how long did you waited after it got stuck.
keikari said:
Does it give some error and how long did you waited after it got stuck.
Click to expand...
Click to collapse
After some wait it has successfully upgraded to lollipop but now nothing is working, touch panel and volume up/down buttons are not working. Only power button is working. Also I haven't any backup of previous android.
asdkazmi said:
After some wait it has successfully upgraded to lollipop but now nothing is working, touch panel and volume up/down buttons are not working. Only power button is working. Also I haven't any backup of previous android.
Click to expand...
Click to collapse
Try factory reset, I have never heard that anyone else has had any problems like that with normal update.
keikari said:
Try factory reset, I have never heard that anyone else has had any problems like that with normal update.
Click to expand...
Click to collapse
I tried factory reset and then volume button was working but touch panel was not working again. Now I'm upgrading it to Marshmallow and will tell you after successfully upgrade.
keikari said:
Try factory reset, I have never heard that anyone else has had any problems like that with normal update.
Click to expand...
Click to collapse
Upgraded to marshmallow but still touch is not working.... please help me
asdkazmi said:
Upgraded to marshmallow but still touch is not working.... please help me
Click to expand...
Click to collapse
This sounds dump but give it a try. Open screen and wait for it to automatically turn off. Then try again.
keikari said:
This sounds dump but give it a try. Open screen and wait for it to automatically turn off. Then try again.
Click to expand...
Click to collapse
Tried but nothing happened.
asdkazmi said:
Tried but nothing happened.
Click to expand...
Click to collapse
And touch screen works in recovery screen?
keikari said:
And touch screen works in recovery screen?
Click to expand...
Click to collapse
No, recovery works with volume and power buttons.
asdkazmi said:
No, recovery works with volume and power buttons.
Click to expand...
Click to collapse
Then it's most likely hardware issue. If you think it's software issue, you can either try to find rollback updates or install TWRP custom recovery and see if some custom rom will give your screen some life.
My wifi/BT was completely broken once and I thought it was hardware issue(factory reset and re-install didn't fixed it), but after I wiped all basic partitions in TWRP and then did stock force update, it started working.
So, what now I need to do is TWRP recovery flash?
asdkazmi said:
So, what now I need to do is TWRP recovery flash?
Click to expand...
Click to collapse
Depending on your question, the answer is either "You need to unlock bootloader." or "Yes".
keikari said:
Depending on your question, the answer is either "You need to unlock bootloader." or "Yes".
Click to expand...
Click to collapse
I just have given my device for hardware check and will tell you tomorrow.
keikari said:
Depending on your question, the answer is either "You need to unlock bootloader." or "Yes".
Click to expand...
Click to collapse
Thanks for your support. Finally, I have repaired my device and that was hardware problem.