Database Info

[GUIDE FOR NOOBS ] How to root samsung s3 i9300

CF-Auto-Root is available for both International and carrier locked versions of Galaxy S3.
As CF-Auto-Root installs or keeps the stock recovery i included the steps to install the ClockworkMod Recovery which you can skip if not needed.
Supporting Models of Galaxy S3 :
- GT-I9300
- GT-I9300T
- GT-I9305
- GT-I9305T
- GT-I9305N
- SHV-E210K
- SHV-E210L
- SHV-E210S
- SHW-M440S
What's installed
- SuperSU binary and APK
- Stock recovery
Requires:
- A windows computer with Galaxy s3 driver installed ( Use Kies ).
- Odin
- Any of the Galaxy S3 model listed in the Supporting Models with more than 50% battery.
- USB Cable
Note:
- This root increases your flash counter. You should run Triangle Away after rooting if want to reset the counter.
- Backup all your important data
- Kill all the Kies processes using Windows Task Manager
- Disable Antivirus
Disclaimer:
Rooting or installing recovery may brick your phone or void warranty. I am not responsible for anything. Do at your risk.
HOW TO ROOT GALAXY S3 USING CF-AUTO-ROOT ?
1. Download and extract Odin3-v1.85_technoxide.com.zip
2. Download and extract CF-Auto-Root-xx-xxxx-modelnumber.zip for your device model from Official XDA thread.
( I am downloaded CF-Auto-Root-m0-m0xx-gti9300.zip as my device model is I9300 )
3. In your PC open Odin3 v1.85.exe
4. Click PDA button and select CF-Auto-Root-xx-xxxx-modelnumber.tar.md5
( Mine is CF-Auto-Root-m0-m0xx-gti9300.tar.md5 )
5. Boot your phone to download mode ( Turn off phone, after all the lights gone press volume Down + Home + Power .If it asks to press a button to continue, press the listed button ).
5. Now, Connect the phone to PC using USB cable.
6. If everything correct Odins ID:COM box it will be in yellow or blue color with a port name.
7. Make sure Re-partition is NOT checked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. Finally Click Start button and wait till the phone reboot.
After complete update Odin will show PASS on top left and phone will reboot.
That's it....You are successfully Rooted your phone.... Now follow the steps below if you want to install ClockWorkMod recovery.
HOW INSTALL CLOCKWORKMOD RECOVERY IN SAMSUNG GALAXY S3 ?
Note
Installing recovery steps and images are made based on Galaxy S3 I9300... if you have another one use the correct one for your model.
1. Install and open ROM Manager
2. Click Recovery Setup.
http://2.bp.blogspot.com/-ayjbsrknzPg/Ug0lcvwiw8I/AAAAAAAABGo/eQiOKgnZJwg/s320/Rom-Manager-Recovery-Setup.png
3. In the next screen select ClockWorkMod Recovery under INSTALL OR UPDATE RECOVERY.
4. In the next screen click on Phone Model
Finally in the next screen click Flash ClockworkMod Recovery and wait till it finishes the download and installation.
* if you want to install ClockWorkMod Touch version click on the toggle button before doing the 5th step.
That's it...done...To check the ClockWorkMod recovery boot to recovery either by holding the Volume up + Home + Power or by clicking the Reboot into Recovery in ROM Manager.

There is no need for 2 same threads about rooting phone..
http://forum.xda-developers.com/showthread.php?t=2235366 here is already one and these sort threads belongs in Samsung galaxy S3 Development or Q&A section of the S3

Fantassy123 said:
There is no need for 2 same threads about rooting phone..
http://forum.xda-developers.com/showthread.php?t=2235366 here is already one and these sort threads belongs in Samsung galaxy S3 Development or Q&A section of the S3
Click to expand...
Click to collapse
I put this here for a guy that couldn't get into development and for who ever else cant get in there and ask questions. Thats why it says guide for noobs.
sorry for the inc

I tried the above mentioned solution but it doesnt work for me!
NAND Write start!!
FAIL!

How to Root Samsung Galaxy Y s5360

How to Root Samsung Galaxy Y s5360​ :victory:
If you want to update your Samsung Galaxy Y S5360 with the latest custom ROMs available then you should know that first of all you must root the phone’s system. Without rooting, you can’t enjoy the Android 4.2 or even 4.3 flavor on your own smartphone (we will bring OS updates that can be installed on your phone soon) therefore you must complete the already mentioned operation. In order to help you out I will teach you how to easily root the Galaxy Y on any firmware, the suitable tutorial being explained below
*********************************************************************************************************************************************************
NOTE : I'M NOT RESPONSIBLE ABOUT ANYTHING WILL HAPPEN TO YOUR DEVICE
*****************************************************************************************************************************************************************
Read it before proceeding further
1) Do you have any experience about how to root an Android device? Do, you have even any idea? If the answers are no then I think you should seek the help from such a person to do it. It is because this type of operations has some risks. You may end up bricking your phone.
2) Did you have charged your phone to at least 60%? You need to do it for being on the safe side. If it switches itself off during the root process; your phone could be bricked.
3) Do not try this method on any other phone than Samsung Galaxy Y.
Click to expand...
Click to collapse
************************************************************************************************************************************************************
Requisites
1) A PC
2) Working internet connection
3) USB Data Cable
4) Samsung USB drivers or KIES.
5) A Samsung Galaxy Y S5360 mobile phone.
Click to expand...
Click to collapse
*************************************************************************************************************************************************
Instructions: Stage I
1) Backup your files. You need to keep your important data like contacts, notes or photos etc on your PC or cloud.
2) Open your PC and connect it to internet.
3) Download zip file from here
4) Now connect your Galaxy Y with PC using the data cable.
5) Copy the zip to your handsets SD card.
6) Disconnect it from the computer.
Click to expand...
Click to collapse
*********************************************************************************************************************************************************
Stage II
This stage will be done on your phone so, switch your PC off. xD
1) Open Settings, go to Applications then Development and check USB Debugging.
2) Now reboot your phone and press VOL Up + Home + Power together during the booting.
3) The Recovery Mode will be opened. If you do not see the recovery mode then try the method no. 2 again.
4) In recovery mode use the Vol Up and Down buttons to navigate and the Home button to select.
5) Now select “Install Zip from SD card.”
6) Then select “Choose Zip from SD card” and find out and select the Zip previously downloaded.
7) The download process will start and will take more than 10 minutes.
8) After the completion of the update follow the next steps on recovery mode.
9) Then select “Wipe Data/Factory Reset”.
10) Now enable “Wipe Cache Partition”.
11) After that select “++++Go Back++++”
12) Reboot the phone and you shall get it rooted.
Click to expand...
Click to collapse
*****************************************************************************************************************************************
HIT THANKS IF THAT WORKS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Completed] Samsung S3 Neo GT-I9300I KitKat 4.4.4 Update

Hello everyone today I found Samsung S3 Neo GT-I9300I KitKat 4.4.4 Update,now no more just go install official kitkat on your S3 Neo GT-I9300I and video tutorial of how to udate it...
Steps to Install Android 4.4.4 KitKat Update on Galaxy S3 Neo I9300I
Step 1- Download Android 4.4.4 I9300IXXUBNH3 for Galaxy S3 Neo on computer and extract the zip file.
Step 2- Download ODIN v3.09 which is needed to install Android 4.4.4 on Galaxy S3 Neo.
Step 3 – Power off your phone and boot it into Download mode. To do so, press and hold Volume Down and Home buttons together, and then hit Power button till you see the construction Android robot and a triangle. Then tap Power again to confirm progress into Download Mode.
Step 4 - Ensure Galaxy S3 Neo USB drivers are installed on your computer.
Step 5 - Launch ODIN on computer and connect your phone to it while your phone is still in Download Mode.
Step 6 - Once the phone connects successfully, one of the ID: COM boxes will turn yellow with the COM port number. This step may be time consuming.
Step 7 - Now choose the files that need to be flashed / installed on your phone, which can be found among the extracted files in Step 1.
Click on 'AP' and select file named 'CODE'.
Click on 'CP' and select file named 'MODEM'.
Click on 'CSC' and select file with CSC' in its name.
Click on 'PIT' and select the .pit file.
Note: Ignore the last three steps if the files are missing.
Step 8 - In ODIN, select the Auto Reboot and F. Reset Time options. But, the Re-Partition option must be checked ONLY if you chose a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN and the installation process will begin. It should take just a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. When the home screen appears, just unplug your phone from the computer.
Your Samsung Galaxy S3 Neo has now been updated to Android 4.4.4 build XXUBNH3 OTA firmware. Go to Settings > About phone to verify the firmware installed,and change the language you prefer becuse it is set as default language to Kaizi and thats it...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[YOUTUBEhttp://youtu.be/r8--WcWriTI][/YOUTUBE]
Please Press Thanks If You Like it...

Good of you to post here. But It should really be posted in Galaxy S III General forum for the users of that device.

[ROM][MULTILANGUAGE] Lenovo A788T Marvell PXA1920 foldrom + CWM [2016.07.17]

Custom ROM based on stock Lenovo ROM S18260 150114.
Removed all unuseful apps (baidu, tmall, lenovo themes etc). It's pretty lightweight.
Added to ROM:
GAPPS
Google keyboard
Chrome
Nova launcher. (in place of Lenovo launcher)
Added as user apps (you can remove them):
ES File Explorer
SuperSU
ROM is rooted.
I recommend you to install True Phone Dialer & Contacts, and remove stock dialer
https://play.google.com/store/apps/details?id=com.hb.dialer.free&hl=pl
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation:
First install recovery
Root your phone with KingRoot, it's the easiest method.
Install ADB with drivers
Enable USB Debugging
Check if your phone is recognized
Unzip package and run burnrecovery.bat
After reboot you should see CWM recovery
ROM installation
Take of battery, disconnect USB cable
Put in battery
Press power, vol+, vol- and keep pressing vol+, vol- till you see recovery menu
Connect phone to PC with USB cable
Select install zip
install zip from sideload
Now run this command "adb sideload a788t_foldrom_20160703.zip" in directory containing ROM
It will start loading ROM
Wait till you can see this info "A788t foldrom install Complete!"
Now reboot your phone
This ROM works nice with Xposed
If you like my work, please donate
Downloads
ROM 2016.07.17
ROM 2016.07.03
Recovery CWM 2016.07.03
Changelog:
2016.07.17 - multilanguage, update SuperSU, play store fix (some apps compatibility problem)
2016.07.03 - initial ROM

How to unlock this 3G network. My phone can't connect to 3G on my country carrier.
Thx

arievhoward said:
How to unlock this 3G network. My phone can't connect to 3G on my country carrier.
Thx
Click to expand...
Click to collapse
Hi
This phone supports only chineese frequencies for 3G/LTE (like any other Lenovo which model ends with 't' )
This will not work in Europe. Only 2G

foldax said:
Hi
This phone supports only chineese frequencies for 3G/LTE (like any other Lenovo which model ends with 't' )
This will not work in Europe. Only 2G
Click to expand...
Click to collapse
but there is "world phone mode" setting on the secret menu of this phone.
every time i enable this option, i lost my imei...
is it posible to enable "world phone mode" option without error,sir?

i don't think it's possible, i thought it's hardware limitation but really don't know
this chip is not popular, there's not much information about
phone is really poor, i had it for one month for fun if you can afford better phone you should buy it

Wow.Really amazing!
Good Work!

Links Dead
Could you reupload the files because the links are already dead please? Thank you!

[ROM] CyanogenMod Based android 4.4.2 custom rom for karbonn a16

Download CYANOGENMOD android 4.4.2 for Karbonn a16 custrom rom
Hello friends.
i was working on karbonn a16 device and got success to port cyanogenmod android 4.4.2.
so whats working in it.
#Almost everything....
what not working
#video recoder.
Dual sim support,
wifi
hotspot
bluetooth
radio,
gps,
inbuilt Opera
viper sound fx booster
ROOTED
Boot Logo changed
Boot animation changed
theme
inbuilt xender
inbuilt Flashify
if you found any other bug then please comment below for more support.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirment : -
1) device must be rooted.
2) custom recovery like cwm should be installed (Click here to know how to install CWM in Karbonn a16) or if you want to flash cwm recovery with whole cyanogen then use #method2
3) battery must be charge upto 50%
How to Flash this Custrom ROM
you can flash this ROM with 2 styles...
when your phone is not bricked then use below method
otherwise use #method 2
Download Frimware zip file ---> Download
place this zip file into internal or external SDcard.
make a full wipe/factory reset \
wipe delvik cache
install zip
reboot
Enjoy!
#method 2
This method is usefull when you device is bricked and you want to install cyanogen insted of stock rom
you can also use it to port cwm recovery to your device
download whole caynogenmod form below links
Download Part 1
DOwnload part 2
Download Part 3
place all rar files in single folder
install any unrar or winrar tool to extract this folder.
Right click on "KarbonnA16_cyanogen_a2zandroid.part1.rar" and choose extract here.
now you will get 2 folders and one instruction file.
now open sp flash tool and click on scatter load tab and choose scatter file from downloaded frimware folder
now click on download tab in flash tool
now pull out the battery from your karbonn a16
now press volume up button and connect to computer via usb cable.
flashing will start
done
enjoy

Thanks for CynogenMod!
Will surely try it and your MarioOS rom ?

Will this support to downgrade a device of samsung galaxy note 3 neo sm-n7505
Please reply