Database Info

USB Tether with rooted Hero?

I still can't get this to work. Unfortunately at my work, we have some corporate policy that keeps me from accessing my wireless tethering connection the tether app creates in modaco's 1.1 rom. Doubt it's anything with the app, but rather I just can't connect to "that type" of connection.
So, that leaves me with USB tethering. No problem at all! But, how do I do it? I'm still getting error 67 codes even though I've got root access. Thanks for help in advance!!

I haven't tested this but these commands (entered either through adb or a terminal emulator on the phone) should get you up and running with USB tethering (make sure you have the drivers installed on your computer from HTC Sync).
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
To turn it off just go into your wireless controls and disable wireless sharing to reset everything.

The easiest way to achieve WORKING WiFi tether is with MoDaCo 1.1. If you've already rooted, you should have used nandroid to create and restore (to make sure your backup works!) a backup. The app "Quick Boot" on the market is the easiest way for you to reboot into recovery mode without having to use adb. If you have a working backup, then you should really try out the ROM, as you can always revert back if something goes wrong! Essentailly, ya got nothing to lose!
P.S. I posted this using Wifi Tether App with MoDaCo Rom 1.1! AWESOME!

lonequid said:
I haven't tested this but these commands (entered either through adb or a terminal emulator on the phone) should get you up and running with USB tethering (make sure you have the drivers installed on your computer from HTC Sync).
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
To turn it off just go into your wireless controls and disable wireless sharing to reset everything.
Click to expand...
Click to collapse
I tried this from a shell last night, and it DID turn on my mobile connection sharing, but I still got error 67's, no differently than if I would have checked the check box in wireless settings. So, it appears this is no dice.

theraginasian said:
The easiest way to achieve WORKING WiFi tether is with MoDaCo 1.1. If you've already rooted, you should have used nandroid to create and restore (to make sure your backup works!) a backup. The app "Quick Boot" on the market is the easiest way for you to reboot into recovery mode without having to use adb. If you have a working backup, then you should really try out the ROM, as you can always revert back if something goes wrong! Essentailly, ya got nothing to lose!
P.S. I posted this using Wifi Tether App with MoDaCo Rom 1.1! AWESOME!
Click to expand...
Click to collapse
I also have MoDaCo 1.1 and while I believe that the wifi tethering DOES work, my work laptop blocks the wireless connection, possibly because it sees it as a peer to peer maybe. In any case, I couldn't tether wirelessly before either in Vista with Windows Mobile either, had to use the USB cable. In all honestly, I like that more anyway because it charges the phone at the same time.
So, anyone that is rooted with a Sprint Hero, can you tether with USB without 67 errors? Thanks in advance!

+1 this thread.
I prefer USB tether to WiFi tether for a couple reasons.
First, it uses less power, so even if your phone is plugged in via USB, it will charge faster.
*EDIT* So, after using the WiFi tether app with my phone plugged in via USB and my laptop plugged in, my phone was LOSING battery, albeit at a slower rate.
Second, I used to get lower ping times with my phones tethered via USB when I had a Blackberry and a Palm Pre (usually 90-130 ms) With the WiFi tether, I seem to be getting 150-230 ms ping times.
Third (and I don't know if this is the same for everyone else, but) I'm getting only 0.8-1.2 mbps down speeds and only 0.2-0.5 mbps up speeds.
So yeah, if people would still keep looking for a mobile network sharing exploit, I'd greatly appreciate it

Then plug it up to the a/c charger. USB charges slower regardless. Only way I know of tethering with usb is to use tetherbot and that isn't true tethering as it uses a SOCKS proxy and you have to have the SDK on the computer. Not to mention you'll be stuck with Firefox unless you can configure the proxy for other programs. There was some other workaround posted on here though.
Just because you've rooted doesn't mean it removes Sprint's system of how people tether. They use a two-NAI system. 1st NAI = your normal data username and password. 2nd NAI = Your PAM (Phone-As-Modem) password which is issued when people have that add-on on their plan, which can't be added to the Everything Data plans.

ajones7279 said:
Then plug it up to the a/c charger. USB charges slower regardless. Only way I know of tethering with usb is to use tetherbot and that isn't true tethering as it uses a SOCKS proxy and you have to have the SDK on the computer. Not to mention you'll be stuck with Firefox unless you can configure the proxy for other programs. There was some other workaround posted on here though.
Click to expand...
Click to collapse
The point the original poster was making is that WiFi tether is not an option for them. Since I'm in the same boat a USB Tether option (if it was ever discovered) would be useful. I don't think it's a ridiculous question to ask if there was a way to do it. I've USB Tethered with my iPhone and Nokia E71 without a problem.
Like the original poster my corporate laptop's security policy does not allow me to connect to an Ad-Hoc network, like the one created through WiFi tether.

ajones7279 said:
Then plug it up to the a/c charger. USB charges slower regardless. Only way I know of tethering with usb is to use tetherbot and that isn't true tethering as it uses a SOCKS proxy and you have to have the SDK on the computer. Not to mention you'll be stuck with Firefox unless you can configure the proxy for other programs. There was some other workaround posted on here though.
Just because you've rooted doesn't mean it removes Sprint's system of how people tether. They use a two-NAI system. 1st NAI = your normal data username and password. 2nd NAI = Your PAM (Phone-As-Modem) password which is issued when people have that add-on on their plan, which can't be added to the Everything Data plans.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=4960553#post4960553
http://code.google.com/p/android-wired-tether/
This app is the wired version of the Wireless tether that comes installed on the MoDaCo rom.
I've been following this app recently, and have it installed on the Hero, but of course since it was ported for the G1 only, it doesn't work on our Hero. It's interesting because it was created with pieces from the Hero in the first place. It says on the site that it will tell you that you do not have the proper kernel installed if that requirement isn't met, and I'm NOT receiving that message.
In fact, everything seems to go just fine when I launch the app, and allow root access. It's right after that where I get a FC as the app is trying to access the system settings menu.
Any smarties out there that would care to take a stab at how we could get this working for both the GSM and CDMA Hero?

Why not use PdaNet it seems to work fine on my laptop. I do have a question on tethering however either wireless or usb. Is it ok to do this on a Sprint everything data plan or do I have to upgrade to something else. If I tether without upgrading will I see a large charge on my bill? I do not use it much if ever but was just wondering if this would effect my bill.

redram38 said:
Why not use PdaNet it seems to work fine on my laptop. I do have a question on tethering however either wireless or usb. Is it ok to do this on a Sprint everything data plan or do I have to upgrade to something else. If I tether without upgrading will I see a large charge on my bill? I do not use it much if ever but was just wondering if this would effect my bill.
Click to expand...
Click to collapse
If PDANet wasn't 30 bucks, I'd gladly consider it. However, I've been tethering over USB with all of my Sprint phones for goodness knows how long, with no problems.
With your everything data plan, you shouldn't see any problems at all. The wired tether app basically just starts an adhoc wireless connection, and then funnels through your data connection to the laptop connected to it. To the data line, and to Sprint, it's no different than an app using data.
In essence, this is how ANY wired USB app should eventually work from a tethering standpoint. Yes, Sprint uses a two tiered NAI system to control data and PAM. However, the trick ALWAYS has been to have the phone not report/act that it's using PAM, rather just turn on mobile sharing and funnel through the internet connection. This is how it worked with Windows Mobile phones too, and eventually will be the same with our Hero. It will have to eventually be done on the Application level, rather than using mobile connection sharing through settings. When this is activated, the Hero attempts to use the PAM settings. We'll either have to remove this somehow, or do it all through the app itself. It will have to be a "middle man" of sorts, isolating the incoming data line, and then acting as a liaison to push it through the USB to the laptop.
That's how I understand it in my head, anyway

I'm not sure what triggers it, but most of the time that command line works for tethering for me (which is why I originally posted it). About one in five times I get the error 67.

CapnBry said:
I'm not sure what triggers it, but most of the time that command line works for tethering for me (which is why I originally posted it). About one in five times I get the error 67.
Click to expand...
Click to collapse
So, can you help clarify your workflow for using it? Are you running it from an ADB Shell on your laptop, or are you launching it from a terminal emulator on your Hero? Also, do you have any wireless settings modified (such as hybrid vs. 1x only) or do you have the mobile network turned off first?
Or, are you more simply just running this from a shell while everything is up and running as normal?
Thanks in advance!

FYI, you can use PdaNet for free WITHOUT paying for it. You only are required to pay for it for any use other than HTTP://. FTP use isn't really a good idea anyway because if Sprint see's you're tethering too much data, they'll know you're tethering and cut you.

mrinehart93 said:
FYI, you can use PdaNet for free WITHOUT paying for it. You only are required to pay for it for any use other than HTTP://. FTP use isn't really a good idea anyway because if Sprint see's you're tethering too much data, they'll know you're tethering and cut you.
Click to expand...
Click to collapse
Hmm...I guess I didn't know that. Thanks a lot! This should work until we get a rooted solution.

mrinehart93 said:
FYI, you can use PdaNet for free WITHOUT paying for it. You only are required to pay for it for any use other than HTTP://. FTP use isn't really a good idea anyway because if Sprint see's you're tethering too much data, they'll know you're tethering and cut you.
Click to expand...
Click to collapse
Not necessarily. I was tethering daily at one point and they never said a word. This includes browsing and downloading 1gb+ torrents.

Mmmh ... you guys could try this application:
http://code.google.com/p/android-wired-tether/
This is 99% based on "Wireless Tether for Root Users" and might work. I've never tested it on a hero. I have it running on a G1 and Magic ... both with a patched kernel - these patches came from Zinx Verituse and the hero-kernel was base for this port.
No idea if it really works ... but you could try.

harry_m said:
Mmmh ... you guys could try this application:
http://code.google.com/p/android-wired-tether/
This is 99% based on "Wireless Tether for Root Users" and might work. I've never tested it on a hero. I have it running on a G1 and Magic ... both with a patched kernel - these patches came from Zinx Verituse and the hero-kernel was base for this port.
No idea if it really works ... but you could try.
Click to expand...
Click to collapse
Hi harry, I've unfortunately not had this work quite yet, I get a force close from the system settings this app is trying to access. My guess is that the kernel isn't patched for it. We might have to request this in future CDMA Hero roms. Thanks!

kmartburrito said:
Hmm...I guess I didn't know that. Thanks a lot! This should work until we get a rooted solution.
Click to expand...
Click to collapse
I got it for free as well.

I can confirm that the USB tether using the command line works for me. I'm getting 1.28Mb/s down and 0.48Mb/s up.

[Q] USB Internet Tethering. Can Verizon control this like the WiFi tether?

As many of you are aware, the Thunderbolt offers USB Internet Connection mode. This allows you to connect your thunderbolt via USB to a PC and use the phones internet connection. This is similar to the WiFi tethering thats currently free for a limited time. Eventually Verizon will start charging for WiFi tethering, but I'm wondering if they have the ability to cut off (unless your pay) the Internet Connection mode once the promotion ends.
The difference I've noticed is that the WiFi tethering is an actual installed application (hence very easily controllable by VZW), whereas the Internet Connection mode is embedded into the operating system (evinced by the fact thats its in the menu options, as well as the option to change what type of connection you want when you plug the USB cable into your computer).
I think once the promotion ends for free WiFi tethering, the USB tethering will still work and remain free unless VZW pushes an update to non rooted phones preventing this?
I ask because I just switched from my Thunderbolt (very poor battery etc even when rooted) to a Droid Charge. I instantly noticed that when I check the settings for internet connection mode, its not 'integrated' in the same sense as the Thunderbolt. Instead, both the WiFi hotspot tethering, as well as USB tethering are in essence a 'third party' application, which upon being launched, present you with a message stating the ability to tether is free during the promotional period, and thereafter you will be charged for data usage.
Any input on this? It's a shame to see it completely changed on the Droid Charge.. Maybe Verizon missed out on the Thunderbolt and USB tethering will always be available for free? We shall see in the months to come.

I know the word of a VZW store associate isn't really worth anything, but, before I bought my ThunderBolt, I was told that wired tethering will go "under the radar", as long as the data usage "isn't too much". The rep directed me to download "PDANet" from Market for this functionality, and she didn't even know at the time that native wired tethering was present on the ThunderBolt.

Also pdanet has been removed from the market though you can just download the apk from their site and install it now. Also I have not herd of anything with verizon but i know AT&T did send out a message to all the people that were using free teathering apps on thier iphones a text messages letteing them know they would be charged if continuing use. I guess Cell companys can tell if your using them some how.

thetwiztidfreak said:
Also pdanet has been removed from the market though you can just download the apk from their site and install it now. Also I have not herd of anything with verizon but i know AT&T did send out a message to all the people that were using free teathering apps on thier iphones a text messages letteing them know they would be charged if continuing use. I guess Cell companys can tell if your using them some how.
Click to expand...
Click to collapse
ATT never sent me a text and I dont have a tether plan. I am a heavy barnacle user at work, makes my 4gclear look like a joke. My gf just got a fascinate(galaxy s), and it seems verizons has native blocked-ish. i rooted my boss's captivate (galaxy s), and he has no tether plan, and he uses USB tether at work everyday. He didnt get a message either. But my GFs natives /ad hoc make her go to the verizon web site.
I'm worried now about using my barnacle. It should be someting like. 3g free, pay for 4g, something lame like that, rather than be phonenazis.

dumb question, how do you use the USB tethering?
Sent from my thunderbolt 4G using Tapatalk

I doubt it has anything to do with app vs. built-in functionality... they can't "easily track it" just because it's an app. I think it would have to do with the way the packets are being routed, and I don't know *how* they're (supposedly) tracking it when you use wifi tethering, so I wouldn't be so sure they won't be able to track it via USB.
It could have to do with looking for packets for protocols that apps don't support (bittorrent?). I'm really not sure. Anybody know the details of how they can tell?

dbow32 said:
dumb question, how do you use the USB tethering?
Sent from my thunderbolt 4G using Tapatalk
Click to expand...
Click to collapse
in settings - > wireless & networks at the bottom there is internet connection mode.

Just bringing this topic back up, but I tried this mode today, and I got a popup like this. It seems they can find out about ICM. I guess this sucks for those of us who thought we could get away with it.

what25 said:
Just bringing this topic back up, but I tried this mode today, and I got a popup like this. It seems they can find out about ICM. I guess this sucks for those of us who thought we could get away with it.
Click to expand...
Click to collapse
This, my friend, is why god invented PDAnet.

Yep... Pdanet works flawlessly. Go find it, worth the leg work. It's not in the market, but still very easy to find and set up.

miketoasty said:
This, my friend, is why god invented PDAnet.
Click to expand...
Click to collapse
I don't use PDANet. I use Wireless Tether and then tunnel all traffic through an encrypted VPN, so Verizon has no way to identify the traffic. Also secures things on public WiFi.

nerozehl said:
then tunnel all traffic through an encrypted VPN,
Click to expand...
Click to collapse
Can you point me to a tutorial on how to set up the vpn part of this?
I've already got wireless tether installed and working.

zxsix said:
Can you point me to a tutorial on how to set up the vpn part of this?
I've already got wireless tether installed and working.
Click to expand...
Click to collapse
What O/S are you running on your server? If you're running FreeBSD, I'll gladly give you the configuration scripts/files I'm using.

nerozehl said:
What O/S are you running on your server? If you're running FreeBSD, I'll gladly give you the configuration scripts/files I'm using.
Click to expand...
Click to collapse
No server of my own. Windows 7 x64 machine.
I think my router has vpn capability. I'll play with that.

Normally I use PPTP and L2TP/IPsec VPNs for work, but I used OpenVPN instead since it's easier to use and doesn't require too much server-side work. It's natively supported in CM7 and you can get a binary of openvpn with a nice GUI on the market, if you're using Froyo or the new GB leak.
Make sure your phone's kernel supports TUN/TAP. If enough people care about setting up tunnelling, I'll make a post somewhere with a full tutorial.
Here are some of my configuration files (FreeBSD 8.2-RELEASE)
/usr/local/etc/openvpn/openvpn.conf:
Code:
# OpenVPN configuration on Mephisto
# Up/Down Scripts
up /usr/local/etc/openvpn/up.sh
down /usr/local/etc/openvpn/down.sh
# Bridge/Adapter and UDP/IP settings
server-bridge 10.4.11.10 255.255.255.0 10.4.11.200 10.4.11.220
port 1194
proto udp
dev tap0
keepalive 10 120
comp-lzo
# Force all-traffic tunneling and push a DNS server
push "redirect-gateway def1"
push "dhcp-option DNS 67.19.72.206"
# Certificate locations
dh /usr/local/etc/openvpn/keys/dh2048.pem
ca /usr/local/etc/openvpn/keys/ca.crt
cert /usr/local/etc/openvpn/keys/server.crt
key /usr/local/etc/openvpn/keys/server.key
# De-escalate permissions
user nobody
group nobody
# Logging information
status /usr/local/etc/openvpn/openvpn-status.log
verb 4
mute 20
/usr/local/etc/openvpn/up.sh: (chmod +x)
Code:
#!/bin/sh
# xl0 is the ethernet NIC on this server
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 addm xl0 addm $dev up
/sbin/ifconfig $dev up
/usr/local/etc/openvpn/down.sh: (chmod +x)
Code:
#!/bin/sh
/sbin/ifconfig bridge0 deletem $dev
/sbin/ifconfig bridge0 destroy
/sbin/ifconfig $dev destroy
/etc/rc.conf: (snippet to show what you need to add for OpenVPN)
Code:
gateway_enable="YES"
if_tap_load="YES"
openvpn_enable="YES"
openvpn_if="tap"
openvpn_configfile="/usr/local/etc/openvpn/openvpn.conf"
openvpn_flags="--script-security 2"
Make sure the following kernel states are enabled:
Code:
net.inet.ip.forwarding: 1
net.inet.ip.fastforwarding: 1
These files are for FreeBSD, but the configurtion file should work on any implementation.

I take it apps like barnacle and wireless tether go undected right?
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.

lrs421 said:
I take it apps like barnacle and wireless tether go undected right?
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
Click to expand...
Click to collapse
So far i didn't get notices while using wireless tether. Never used barnacle tether though.

I remember reading somewhere about a 3G phone on Verizon that when you turn on the native hotspot app, the NAI used by the phone to obtain an IP address for your networked devices, and subsequently service the IP requests for those devices, is made through a DIFFERENT NAI than the phone when you are making requests from your mobile phone.
There must also be some other differences. Recall a while ago in the general forum someone made a complaint about their Thunderbolt mobile browsers being unable to access images from imgur.com. I experienced the same issue. The REALLY wierd thing though is that if I turned on hotspot and went on my laptop through the hotspot, I COULD see images on imgur.com. This means that native wifi hotspot also sends you to a different DNS server than internet requests made through the phone.
It would be interesting to see at what level that happens in the application/operating system/radio stack. It's possible (likely even probable) that wired tether apps specifically like PDAnet somehow work around these differences. If the NAI is spoofed or if the requests are masked to look like they are coming from an application on the phone, I don't see how it is possible for Verizon to know the difference, or ever limit it. They would have to do deep packet inspection and see what you are doing with your internet traffic at the application level, which I think would be much more trouble than it is worth, not to mention bordering on illegal.
tl;dr: I don't think Verizon can ever stop PDAnet.

I know that so far I have not had any issues on my Dinc using both the wired and wifi tethering native in OpenVPN. If verizon gets too smart about it all I will just set up a VPN to hide everything from them even more

I believe the native browser on the thunderbolt didn't give you the option of being recognized as a mobile browser or desktop browser, which could affect the way certain websites will show.
Sent from my ADR6400L using XDA App

wifi tether

Hi guys,
I am loving the Nexus 5. I've ordered it, and should be here in 2 days. Only issue is, I need the program android-wifi-tether https://code.google.com/p/android-wifi-tether/ to be working on this phone.
You see, I have a data plan from my carrier which DOES NOT ALLOW you to tether = (. However, the program wifi tether works great to get around this. Previously I used to use an App called Fox-Fi which did something similar.
Currently I'm running a TW based Samsung S3, because WiFi Tether will only work on TW-based roms, not AOSP-based roms.
Do you think there is any chance to get WiFi Tether, (or similar) App that will work on the Google Nexus 5?
Thoughts?

It looks like the biggest requirement is Netfilter, which is essentially IP tables. Try installing IP tables, and see if the program will run. Otherwise, you can always use another tethering app like easytether, or another program (I know that there are loads out there). If you are rooted, it should not be much of a hassle to install.

Es Filexplorer will do it for you once rooted and a great file management app also

Thanks guys. I'll give it a shot once device is in my hands. Thanks.

Another method for this I use that sometimes works is to tether using the default app and just use a User Agent switch in google chrome for HTML traffic. My video games as well as spotify ETC work like normal I only need the UA switcher for traffic within the browser.

Wait, am I missing something here? OP, tethering is a standard feature in Nexus phones, esp now that Verizon is out of the equation.
Why can't you just use the built-in tethering? If it's an issue of your provider being able to track that, then I don't think any of the 3rd party tools are going to help. Typically, just a user-agent switcher can take care of the problem on the device that you're tethered to.

I'm dealing with this issue right now. I had a note 2 running macks rom on my sprint note 2 that let you hotspot free. The N5 tether/hotspot does not work. We need a work around..

Engineer4life said:
I'm dealing with this issue right now. I had a note 2 running macks rom on my sprint note 2 that let you hotspot free. The N5 tether/hotspot does not work. We need a work around..
Click to expand...
Click to collapse
My carrier has 2 data plans. 6gb for $30 gives you LTE and tether/hotspot. Or Unlimited LTE for $45 -but tether/hotspot is disabled/not allowed.
I'm on the $45 plan and built-in tether does not work. But the app "wifi-tether" gets around this and works Great!
The issue isn't user-agent. With built-in tether I can't even get a data signal. It will create the a dud Wi-Fi hotspot.
Let's hope IPTables works! I'm sure Bluetooth tether and USB tether may still work, but is much more annoying.

prettyha8 said:
My carrier has 2 data plans. 6gb for $30 gives you LTE and tether/hotspot. Or Unlimited LTE for $45 -but tether/hotspot is disabled/not allowed.
I'm on the $45 plan and built-in tether does not work. But the app "wifi-tether" gets around this and works Great!
The issue isn't user-agent. With built-in tether I can't even get a data signal. It will create the a dud Wi-Fi hotspot.
Let's hope IPTables works! I'm sure Bluetooth tether and USB tether may still work, but is much more annoying.
Click to expand...
Click to collapse
which version of the wifi tether app did you use that works? It seems some versions are picky about some phones I just want to get everything I need for when my Nexus 5 arrives

orthonovum said:
which version of the wifi tether app did you use that works? It seems some versions are picky about some phones I just want to get everything I need for when my Nexus 5 arrives
Click to expand...
Click to collapse
For my TW-based Samsung Galaxy S3, I used the file "wifi_tether_v3_4-experimental1.apk", then I changed the SSID and changed the WPA2-PSK phasephrase.
*** I think the trick was, if you did NOT change the default SSID or added a WPA2 password the App did not work. After you set a WPA2 password, you can then turn off encryption or change the SSID back to default.
But I don't think know if this will work for the Nexus 5. **Fingers-crossed!

bump

There is another thread with more discussion on this matter here: http://forum.xda-developers.com/showthread.php?t=2512674

prettyha8 said:
The issue isn't user-agent. With built-in tether I can't even get a data signal. It will create the a dud Wi-Fi hotspot.
Click to expand...
Click to collapse
Is that the case on a Nexus device or something else? In theory my plan doesn't allow tethering, but I've never had an issue with the built-in hotspot. I'm just trying to figure out how your carrier would even know you were using a hotspot versus having data requests come from the phone itself. The traffic should look the same, for the most part.

bobalias said:
Is that the case on a Nexus device or something else? In theory my plan doesn't allow tethering, but I've never had an issue with the built-in hotspot. I'm just trying to figure out how your carrier would even know you were using a hotspot versus having data requests come from the phone itself. The traffic should look the same, for the most part.
Click to expand...
Click to collapse
I believe when you tether, your phone creates a secondary data connection pipe for tethering data. Apps like WiFi-Tether spoof this, and can even create an internal proxy server, such that all tethered data will look like on-device mobile browsing data.
My carrier let's me only create one data connection, thus tether is not allowed. However if I insert my SIM into a "MiFi device", then I can "share" the data connection, as only 1 data connection is being established.
I MIGHT BE WRONG, but this is what it looks like is happening in my findings. Hence the use of IPTABLES to re-route.
I'm not sure why AOSP-based custom Roms could never get WiFi tether working, but TouchWiz (TW) based roms could. I assume something in the kernel. However, I need this working badly.

Interesting, I'd never really given the process a detailed consideration but that sounds like a plausible explanation for both how they detect it, how they block it, and how software modifications let you get around it.

I am currently using wifi tether on evo lte on sprint, fine. Thinking of getting nexus 5. Will this app work on it? that link to the other thread was about tmobile and data plans and stock hotspot app. I am interested in wifi tether app with root. What are the settings to make this work on N5?
Thanks

Dungeon47 said:
There is another thread with more discussion on this matter here: http://forum.xda-developers.com/showthread.php?t=2512674
Click to expand...
Click to collapse
Dig through this thread. Somewhere there's a post explaining what to do to stop your carrier from checking if you are tethering. It requires editing a database and changing the proxy to ipv4 instead of ipv6.
Sent from my Nexus 7 using Tapatalk

[Q] galaxy S5 tmobile wifi tethering free

Hey I'm trying to find a way to work around my hotspot tethering limit. I have unlimited data and want to use the most out of it, I have had unlimited data for about 3 weeks now and I have used 200 gigs of data and I want o be able to co next my Xbox and laptop for more than just a day or 2 because I only get 5 gigs of hotspot. So if anyone has a workaround for the tmobile s5 please comment and let me know

sgs5tetherhelp said:
Hey I'm trying to find a way to work around my hotspot tethering limit. I have unlimited data and want to use the most out of it, I have had unlimited data for about 3 weeks now and I have used 200 gigs of data and I want o be able to co next my Xbox and laptop for more than just a day or 2 because I only get 5 gigs of hotspot. So if anyone has a workaround for the tmobile s5 please comment and let me know
Click to expand...
Click to collapse
Are you rooted?

Yes via towel root

sgs5tetherhelp said:
Yes via towel root
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter
I use it on my T-Mobile phones. Follow the link in the description for settings. Gotta warn ya though, it might not work without further tweaks. You might need to google up some more specific instructions. The problem with this app (not the app's fault though) is that every phone/brand/ROM is different and needs different settings, and unfortunately these settings don't have descriptions. Plus the author is Italian and his English ain't too good.
You'll probably also have to create a new APN for tethering. Go to your System Settings, More networks, Mobile Networks, Access Point Names, then hit the menu button to add a new APN. Copy everything in the default APN down, then make everything in the new APN exactly the same, but instead of IPv6, use IPv4.
For tethering to just your laptop though, I recommend PdaNet+ (not a root app) and using USB tethering. The reason is that using your phone as a wifi hotspot is a processor and battery hog, and the more it's used, the hotter your phone will get and the more your battery gets used (shortening its overall lifespan). USB tethering however basically turns your phone into a conduit, rather than a rebroadcaster, and won't fry your phone. It works by using a companion program on your computer (also does bluetooth, but it's much slower), and has the option (which you need to use) to "hide tether usage". Another cool feature is you can set it up so text messages will pop up on your computer. The one single issue with USB tethering with PdaNet is with Netflix. If you try to watch something, it'll take you to the page saying your computer doesn't meet the minimum system requirements. Whatever VPN/proxy/whatever that it uses to mask your usage doesn't jive with Microsoft Silverlight, which Netflix uses. The way around this is to disable the "hide tether usage" option when loading a video, and as soon as it starts loading, select "hide tether usage" again, and you're good to go.
The really cool thing is that these two apps work simultaneously. I use PdaNet to USB tether my phone to my laptop (which is plugged into my 42" TV). The same phone is running Wifi Tether Router so I can use my tablet on wifi. Seriously, how cool is that?!? Complete home internet and cell service for $89.08/month (after taxes).

Hotspot issues with Android Pie

I am having issues regarding Wifi hotspot on Pie.
1. My laptop find it very difficult to find the hotspot. Sometimes I have to restart the hotspot 2-3 times before the network shows up on my laptop. On Oreo, this was always instant and worked immediatly.
2. In the last few days using a hotspot from the phone and my laptop I have had issues regarding DNS/internet. Even though my laptop is connected to the hotspot network, it doesn't have any internet access. When browsing the web on my laptop, all DNS requests always fails. It happens whenever I try to navigate to a site and tries to ping a url from CMD. But if I try to ping a ip address, let say 1.1.1.1, that works fine! I can also use my browser on my phone without any issues at all. The laptop works fine on any other network and the phone works well on its own but the hotspot causes great problems. It sounds to me that for some reason when using a hotspot, DNS requests doesn't come through properly. Also, if I connect to a VPN on my laptop, eveything works, even DNS requests but my VPN is somewhat unreliable so it constantly disconnects so that is not a viable solution for me.
Anyone experiencing similar problems? It's really annoying because now I can't get any work done on my daily commute.
Edit: It sounds similar to these problems: http://piunikaweb.com/2018/08/22/go...hotspot-tethering-issues-after-android-9-pie/

baxtex said:
I am having issues regarding Wifi hotspot on Pie.
1. My laptop find it very difficult to find the hotspot. Sometimes I have to restart the hotspot 2-3 times before the network shows up on my laptop. On Oreo, this was always instant and worked immediatly.
2. In the last few days using a hotspot from the phone and my laptop I have had issues regarding DNS/internet. Even though my laptop is connected to the hotspot network, it doesn't have any internet access. When browsing the web on my laptop, all DNS requests always fails. It happens whenever I try to navigate to a site and tries to ping a url from CMD. But if I try to ping a ip address, let say 1.1.1.1, that works fine! I can also use my browser on my phone without any issues at all. The laptop works fine on any other network and the phone works well on its own but the hotspot causes great problems. It sounds to me that for some reason when using a hotspot, DNS requests doesn't come through properly. Also, if I connect to a VPN on my laptop, eveything works, even DNS requests but my VPN is somewhat unreliable so it constantly disconnects so that is not a viable solution for me.
Anyone experiencing similar problems? It's really annoying because now I can't get any work done on my daily commute.
Edit: It sounds similar to these problems: http://piunikaweb.com/2018/08/22/go...hotspot-tethering-issues-after-android-9-pie/
Click to expand...
Click to collapse
@thugslug @jbm76 I know you guys had an issue with hotspot. Is this the same problem?

yldlj said:
@[email protected] I know you guys had an issue with hotspot. Is this the same problem?
Click to expand...
Click to collapse
Point 2 sounds like it..

jbm76 said:
Point 2 sounds like it..
Click to expand...
Click to collapse
I can't remember what thread you wrote the adb commands that might fix it? Was going to direct him to that post.

yldlj said:
I can't remember what thread you wrote the adb commands that might fix it? Was going to direct him to that post.
Click to expand...
Click to collapse
Yep that fixed for me ??
adb shell settings get global tether_dun_required
If the result is "null" or "1"
adb shell settings put global tether_dun_required 0
Reboot phone

yldlj said:
@[email protected] I know you guys had an issue with hotspot. Is this the same problem?
Click to expand...
Click to collapse
His first problem I don't have, but it's the second that's the same issue as mine.
Obviously he's never searched or he'd have found my lengthy post not very far back.
The solution is there too.
I've never tried turning the VPN on to see if I get through access to the internet that way. I can't now as I've applied the fix @jbm76 found, and I don't really want to back out the fix to try it.
Definitely an area where pie has gone backwards. For those of us affected anyway.
Edit.... Sorry, I didn't note that this was a new thread.
My post is in the OB4 thread (which I at first thought this was). I'm tired and didn't look well enough.

jbm76 said:
Yep that fixed for me ?
adb shell settings get global tether_dun_required
If the result is "null" or "1"
adb shell settings put global tether_dun_required 0
Reboot phone
Click to expand...
Click to collapse
I will try these and report back.

baxtex said:
I will try these and report back.
Click to expand...
Click to collapse
If you get errors at the cmd prompt make sure usb debugging is set 'on' on the phone.

Followed the commands and it seemed to do the trick! Many many thanks!

baxtex said:
Followed the commands and it seemed to do the trick! Many many thanks!
Click to expand...
Click to collapse
[emoji3][emoji3]
Most people it works straight away. What region are you in?
Sent from my SM-P605 using Tapatalk

jbm76 said:
[emoji3][emoji3]
Most people it works straight away. What region are you in?
Sent from my SM-P605 using Tapatalk
Click to expand...
Click to collapse
Sweden.
I want to remember that it did work before, then I have to reflash Pie again and that's when the issues started.

I still wanted to say that I still suffering from the first problem, having difficulties actually finding the hotspot at all.

Its very odd. This problem has started to arise again. I tried running adb shell settings get global tether_dun_required again but I get the answer that it is 0 so that looks fine. I haven't updated anything since I had this problem the last time.

Folks,
To provide some more info and more things to try if you are rooted (I am in the US on T-Mobile). These instructions should also help you avoid tethering detection using the standard Android tethering options if you wish to.
1) Go into settings --> system --> developer options and turn off Tethering hardware acceleration. This will make sure all tethering routing is done by Android at the software level and not by Qualcomm's chipsets (so following steps will apply).
2) As suggested, put global tether_dun_required 0. Note you can also do this from a command prompt by typing su (get root access) and typing setting put global tether_dun_required 0. What this does is route tething traffic over the same APN as phone traffic, and not the hidden tethering APN that some carriers put on the sim cards.
3) Install Change TTL and in settings set it to run a boot and set TTL to 64. This ensures that all traffic leaving your phone will have a TTL of 64 and look like it is coming from the phone. (I am pretty sure this also set's ipv6 hop limit, as TMobile in the US is all IPv6 and this hides traffic.)
Reboot. If you still have trouble -- try Android's USB option to see if it is WiFi related vs Tethering system related.
- Verify that global tether_dun_required is still 0 after reboot (it should be if you are rooted).
- Delete the WiFi entry on your computer and re-join the phone's network -- sometimes it is on your computer's side.
Another thing to try is Easy Tether -- this is a good USB tethering option that won't use Android tethering system and it is guaranteed to route traffic over the phone's network APN.
If the issue is DNS, you can isolate that by manually putting a DNS (8.8.8.8) into the tethered computer to see if that is the issue.
Also, google search xda VPN Hotspot. This app has a ton of options to change Android's tethering routing even if you are not using a VPN. This may also help you figure something out. You can activate tethering, then go in here and turn on the wlan interface and it should route traffic directly to that (which should be happening anyways because of tether_dun_required = 0).
Good luck!
MW

MetroWestMA said:
Folks,
To provide some more info and more things to try if you are rooted (I am in the US on T-Mobile). These instructions should also help you avoid tethering detection using the standard Android tethering options if you wish to.
1) Go into settings --> system --> developer options and turn off Tethering hardware acceleration. This will make sure all tethering routing is done by Android at the software level and not by Qualcomm's chipsets (so following steps will apply).
2) As suggested, put global tether_dun_required 0. Note you can also do this from a command prompt by typing su (get root access) and typing setting put global tether_dun_required 0. What this does is route tething traffic over the same APN as phone traffic, and not the hidden tethering APN that some carriers put on the sim cards.
3) Install Change TTL and in settings set it to run a boot and set TTL to 64. This ensures that all traffic leaving your phone will have a TTL of 64 and look like it is coming from the phone. (I am pretty sure this also set's ipv6 hop limit, as TMobile in the US is all IPv6 and this hides traffic.)
Reboot. If you still have trouble -- try Android's USB option to see if it is WiFi related vs Tethering system related.
- Verify that global tether_dun_required is still 0 after reboot (it should be if you are rooted).
- Delete the WiFi entry on your computer and re-join the phone's network -- sometimes it is on your computer's side.
Another thing to try is Easy Tether -- this is a good USB tethering option that won't use Android tethering system and it is guaranteed to route traffic over the phone's network APN.
If the issue is DNS, you can isolate that by manually putting a DNS (8.8.8.8) into the tethered computer to see if that is the issue.
Also, google search xda VPN Hotspot. This app has a ton of options to change Android's tethering routing even if you are not using a VPN. This may also help you figure something out. You can activate tethering, then go in here and turn on the wlan interface and it should route traffic directly to that (which should be happening anyways because of tether_dun_required = 0).
Good luck!
MW
Click to expand...
Click to collapse
Hi and thank you for your post. It seems that windows had changed dns settings by its own to something invalid, so that is why it didn't work. However I am still having connection issues. Mainly I find it very difficult to connect my laptop (and other devices) to the hotspot of the Oneplus 6.
1) Done.
2) Done.
3) It was already set at 64 but I tried setting in to 64 again.
DUN is still 0 after reboot. I have also removed the wifi from my PC and changed name on the hotspot. Also tried both 2.4 and 5 Ghz. When the pc is connected the hotspot, I can ping google succesfully, so internet works but not DNS, all requests in my browser times out. I have also tried setting DNS to external providers in the phone (not sure if if affects the hotspot though). I looked at easy tether but root version was pretty expensive. I also googled XDA VPN Hotspot but I'm not sure which app you mean. Do you have the link?
Right now I'm just thinking of factory resetting the phone and installing the latest oxygen version (I'm still on 9.0.0.0).
Here is even more testing:
What I am experiencing is that there are grave problems trying to connect when in an area with a lot of wifi networks.
I live on the countryside and I thought I would try using hotspot for a couple of times. Thing is, at home, sharing hotspot from the phone to my laptop always works instantly, both on 5Ghz and 2.4Ghz. I might add that there are basically no wifi networks interfering where I live, except for my own. When I start my bus ride in the morning from my house to a city were I work, the hotspot usually works pretty good. But it's when I'm going home that I am start having problems. In the city, there is probably around 50-100 wifi networks when I start the ride home. And that's when it usually is impossible to connect the hotspot to the laptop. However, when leaving the city and entering the highway, it is usually easier. I have these connection problems on both 5Ghz and 2.4Ghz and if it does connect, 2.4 is hideous, it disconnects all the time.
So the conclusion for me is that it is having a very hard time connecting when there are a lot of wifi networks around. However, It never seemed to be a major problem on Oreo, only on Pie.

baxtex said:
Hi and thank you for your post. It seems that windows had changed dns settings by its own to something invalid, so that is why it didn't work. However I am still having connection issues. Mainly I find it very difficult to connect my laptop (and other devices) to the hotspot of the Oneplus 6.
1) Done.
2) Done.
3) It was already set at 64 but I tried setting in to 64 again.
DUN is still 0 after reboot. I have also removed the wifi from my PC and changed name on the hotspot. Also tried both 2.4 and 5 Ghz. When the pc is connected the hotspot, I can ping google succesfully, so internet works but not DNS, all requests in my browser times out. I have also tried setting DNS to external providers in the phone (not sure if if affects the hotspot though). I looked at easy tether but root version was pretty expensive. I also googled XDA VPN Hotspot but I'm not sure which app you mean. Do you have the link?
Right now I'm just thinking of factory resetting the phone and installing the latest oxygen version (I'm still on 9.0.0.0).
Here is even more testing:
What I am experiencing is that there are grave problems trying to connect when in an area with a lot of wifi networks.
I live on the countryside and I thought I would try using hotspot for a couple of times. Thing is, at home, sharing hotspot from the phone to my laptop always works instantly, both on 5Ghz and 2.4Ghz. I might add that there are basically no wifi networks interfering where I live, except for my own. When I start my bus ride in the morning from my house to a city were I work, the hotspot usually works pretty good. But it's when I'm going home that I am start having problems. In the city, there is probably around 50-100 wifi networks when I start the ride home. And that's when it usually is impossible to connect the hotspot to the laptop. However, when leaving the city and entering the highway, it is usually easier. I have these connection problems on both 5Ghz and 2.4Ghz and if it does connect, 2.4 is hideous, it disconnects all the time.
So the conclusion for me is that it is having a very hard time connecting when there are a lot of wifi networks around. However, It never seemed to be a major problem on Oreo, only on Pie.
Click to expand...
Click to collapse
Seems more like WiFi / Computer related than phone. Did you try USB tethering? Is DNS get manually set in your computer by something else you installed?

MetroWestMA said:
Seems more like WiFi / Computer related than phone. Did you try USB tethering? Is DNS get manually set in your computer by something else you installed?
Click to expand...
Click to collapse
USB tethering works fine, dns as well. Its just the connection, it is very difficult to connect anything to the Oneplus 6 in wifi crowded areas.

Will this effect Bluetooth tethering too? Or is there another command for that? Dang built in hot spot get horrible speed after this setting is set, at least be on T-Mobile.

Hi guys,
I also face a strange issue, the connected devices to the hotspot it keeps disconnected after some time.. 1min, 5min, 15min...is random and annoying. Dose anyone face this issue to? Tried diferent fixes but nothing works, it remained to do a factory reset to see if the problem persist..

khrisstyan said:
Hi guys,
I also face a strange issue, the connected devices to the hotspot it keeps disconnected after some time.. 1min, 5min, 15min...is random and annoying. Dose anyone face this issue to? Tried diferent fixes but nothing works, it remained to do a factory reset to see if the problem persist..
Click to expand...
Click to collapse
Read this thread. Workaround in here.