Hello,
I neef urgent help, one day i was trying to flash custom recovery to my razr hd, it is i dont know 925 or 926. It is 16gb.
I was unsuccess to flash recovery then i was everytime getting fastboot msg and i had to press normal recovery everytime. Now i tried to factory data reset my mob and it is stuck on logo and time black screen with dots..
I have rsd lite but i think firmware i am not getting exact one thats why it is nog flashing... Please help me what to do. I have attached pics of recovery and fastboot.
I can help you but I need to know if you have correct drivers installed unless your using linux otherwise you need to install the correct drivers for the device. xt925 i think is gsm not sure and the xt926 is cdma 4g. I also need to know what version of android you were using so we flash the correct firmware(e.g, jelly bean, kit kat and so on). I also need to know what version of rsd you have because you might need to use a newer version. After we get your device back to life. I will give you the link to the correct recovery for the device. footnote: you will need to re-root device after it is flashed back to life, then flash correct recovery. You can only flash recovery if you unlocked the bootloader witch you do after device is rooted. 0 means bootloader is locked and 3 means it is unlocked. If you flash any recovery with a locked bootloader than you can soft brick or hard brick the device. If this is what you did and your just stuck at the Moto M than it just needs the correct stock firmware flashed so it can come back to life.
OGdroidster said:
I can help you but I need to know if you have correct drivers installed unless your using linux otherwise you need to install the correct drivers for the device. xt925 i think is gsm not sure and the xt926 is cdma 4g. I also need to know what version of android you were using so we flash the correct firmware(e.g, jelly bean, kit kat and so on). I also need to know what version of rsd you have because you might need to use a newer version. After we get your device back to life. I will give you the link to the correct recovery for the device. footnote: you will need to re-root device after it is flashed back to life, then flash correct recovery. You can only flash recovery if you unlocked the bootloader witch you do after device is rooted. 0 means bootloader is locked and 3 means it is unlocked.
Click to expand...
Click to collapse
Hello,
RSD lite version is: 6.1.5, Drivers i downloaded from motorola website and it detects my device... I was using last kitkat version.
Device has written backside Verizon 4g but i was using gsm network only 3g was working..
Please check attachment of recovery and fastboot screen.
efuzone said:
Hello,
RSD lite version is: 6.1.5, Drivers i downloaded from motorola website and it detects my device... I was using last kitkat version.
Device has written backside Verizon 4g but i was using gsm network only 3g was working..
Please check attachment of recovery and fastboot screen.
Click to expand...
Click to collapse
Thanks for the pics. Your status is zero witch means you tried to flash recovery with a locked bootloader this is your problem. we can fix this cause obviously you can still get to fastboot mode. You had the the first version of kitkat Bootloader. we are going to flash the cdma one then you can find the gsm flashable zip in the forum for this device to flash once you get going. Here is the link for the drivers witch are for 64 bit windows if your running 32 bit than let me know so I can link you to those instead. http://forum.xda-developers.com/attachment.php?attachmentid=3187938&d=1425146663. Here is a newer version of rsd lite. http://forum.xda-developers.com/attachment.php?attachmentid=3388466&d=1435873884 first uninstall the rsd you have now then install drivers then install the rsd lite i linked you to. here is the firmware for your device https://www.androidfilehost.com/?fid=24269982087011673 Let me know when you get going ill give the link to a page that explains root and how to unlock the bootloader.
OGdroidster said:
I can help you but I need to know if you have correct drivers installed unless your using linux otherwise you need to install the correct drivers for the device. xt925 i think is gsm not sure and the xt926 is cdma 4g. I also need to know what version of android you were using so we flash the correct firmware(e.g, jelly bean, kit kat and so on). I also need to know what version of rsd you have because you might need to use a newer version. After we get your device back to life. I will give you the link to the correct recovery for the device. footnote: you will need to re-root device after it is flashed back to life, then flash correct recovery. You can only flash recovery if you unlocked the bootloader witch you do after device is rooted. 0 means bootloader is locked and 3 means it is unlocked. If you flash any recovery with a locked bootloader than you can soft brick or hard brick the device. If this is what you did and your just stuck at the Moto M than it just needs the correct stock firmware flashed so it can come back to life.
Click to expand...
Click to collapse
OGdroidster said:
Thanks for the pics. Your status is zero witch means you tried to flash recovery with a locked bootloader this is your problem. we can fix this cause obviously you can still get to fastboot mode. You had the the first version of kitkat Bootloader. we are going to flash the cdma one then you can find the gsm flashable zip in the forum for this device to flash once you get going. Here is the link for the drivers witch are for 64 bit windows if your running 32 bit than let me know so I can link you to those instead. http://forum.xda-developers.com/attachment.php?attachmentid=3187938&d=1425146663. Here is a newer version of rsd lite. http://forum.xda-developers.com/attachment.php?attachmentid=3388466&d=1435873884 first uninstall the rsd you have now then install drivers then install the rsd lite i linked you to. here is the firmware for your device https://www.androidfilehost.com/?fid=24269982087011673 Let me know when you get going ill give the link to a page that explains root and how to unlock the bootloader.
Click to expand...
Click to collapse
Hello,
Thanks for your help please send drivers for Windows 7 32bit i am using 32bit OS.
efuzone said:
Hello,
Thanks for your help please send drivers for Windows 7 32bit i am using 32bit OS.
Click to expand...
Click to collapse
here is 32 bit drivers http://forum.xda-developers.com/attachment.php?attachmentid=3187936&d=1425146651
I forgot to tell you that for it to flash correctly you can't have a low battery witch I saw on your fastboot. you will need fastbook cable. A fastboot cable is used so you can boot or get to fastboot with or without battery like in your case the battery is to low. I got mine on amazon for 10 dollars. here is the link https://www.amazon.com/gp/aw/s/ref=...43801?k=fastboot+cable&sprefix=fastboot+cable
OGdroidster said:
here is 32 bit drivers http://forum.xda-developers.com/attachment.php?attachmentid=3187936&d=1425146651
I forgot to tell you that it flash correctly with a low battery witch I saw on your fastboot. you will need fastbook cable. A fastboot cable is used so you can boot or get to fastboot with or without battery like in your c
Click to expand...
Click to collapse
Hello,
Thanks are you sure, it wi flash on low battery because last time rsd and fasboot both were giving errors cant flash low battery then i had to charge it but flash was still not success due to firmware mismatch.
efuzone said:
Hello,
Thanks are you sure, it wi flash on low battery because last time rsd and fasboot both were giving errors cant flash low battery then i had to charge it but flash was still not success due to firmware mismatch.
Click to expand...
Click to collapse
You need a fastboot cable i put the link and explanation in previous post
---------- Post added at 08:12 AM ---------- Previous post was at 07:55 AM ----------
OGdroidster said:
You need a fastboot cable i put the link and explanation in previous post
Click to expand...
Click to collapse
I forgot to tell you that for it to flash correctly you can't have a low battery witch I saw on your fastboot. you will need fastbook cable. A fastboot cable is used so you can boot or get to fastboot with or without battery like in your case the battery is to low. I got mine on amazon for 10 dollars. here is the link https://www.amazon.com/gp/aw/s/ref=i...fastboot+cable
OGdroidster said:
I can help you but I need to know if you have correct drivers installed unless your using linux otherwise you need to install the correct drivers for the device. xt925 i think is gsm not sure and the xt926 is cdma 4g. I also need to know what version of android you were using so we flash the correct firmware(e.g, jelly bean, kit kat and so on). I also need to know what version of rsd you have because you might need to use a newer version. After we get your device back to life. I will give you the link to the correct recovery for the device. footnote: you will need to re-root device after it is flashed back to life, then flash correct recovery. You can only flash recovery if you unlocked the bootloader witch you do after device is rooted. 0 means bootloader is locked and 3 means it is unlocked. If you flash any recovery with a locked bootloader than you can soft brick or hard brick the device. If this is what you did and your just stuck at the Moto M than it just needs the correct stock firmware flashed so it can come back to life.
Click to expand...
Click to collapse
OGdroidster said:
You need a fastboot cable i put the link and explanation in previous post
---------- Post added at 08:12 AM ---------- Previous post was at 07:55 AM ----------
I forgot to tell you that for it to flash correctly you can't have a low battery witch I saw on your fastboot. you will need fastbook cable. A fastboot cable is used so you can boot or get to fastboot with or without battery like in your case the battery is to low. I got mine on amazon for 10 dollars. here is the link https://www.amazon.com/gp/aw/s/ref=i...fastboot+cable
Click to expand...
Click to collapse
I have ordered cable, because i am not able to charge mobile correctly, i will try when i will have cable in my hand.
efuzone said:
I have ordered cable, because i am not able to charge mobile correctly, i will try when i will have cable in my hand.
Click to expand...
Click to collapse
The cable doesnt charge phone just use it to flash the phone in fastboot mode and once you get the phone going put it on the charger.
efuzone said:
I have ordered cable, because i am not able to charge mobile correctly, i will try when i will have cable in my hand.
Click to expand...
Click to collapse
Did you recieve the fastboot cable?
OGdroidster said:
Did you recieve the fastboot cable?
Click to expand...
Click to collapse
Hello,
Really not yet i ordered from ebay china seller so still waiting for it
efuzone said:
Hello,
Really not yet i ordered from ebay china seller so still waiting for it
Click to expand...
Click to collapse
OK, that sucks. How you got to wait. Thats gonna take 2 to 4 weeks. At least from what I expierinced when I ordered loca glue on amazon and it was coming from china. If you need some guidence when you get the fastboot cable just send me a message.
OGdroidster said:
Did you recieve the fastboot cable?
Click to expand...
Click to collapse
Hello,
I received cable and now i am trying to flash firmware, it is giving error.
Downgrade security version
update gpt_main version failed
preflash validation failed for GPT
Tried another firmware getting same error, preflash preflash validation failed for gpt
Flash "VRZ_XT926_9.8.1Q-94-1_CFC" it is no on 6 stage showing invalid image size for partition tz
efuzone said:
Tried another firmware getting same error, preflash preflash validation failed for gpt
Flash "VRZ_XT926_9.8.1Q-94-1_CFC" it is no on 6 stage showing invalid image size for partition tz
Click to expand...
Click to collapse
Witch version of rsd are you using and are you flashing from fastboot and also if you can give me in order of steps per say of what you are doing from begining to end. Oh yea did you install the drivers from the link I gave you.
OGdroidster said:
Witch version of rsd are you using and are you flashing from fastboot and also if you can give me in order of steps per say of what you are doing from begining to end. Oh yea did you install the drivers from the link I gave you.
Click to expand...
Click to collapse
Hello,
I have latest drivers, latest RSD which you provided me. I have downloaded firmware which you given me it is giving gpt error, when i tried another one it is giving tz error and then again gpt error.
RSD Version is 6.2.4
efuzone said:
Hello,
I have latest drivers, latest RSD which you provided me. I have downloaded firmware which you given me it is giving gpt error, when i tried another one it is giving tz error and then again gpt error.
RSD Version is 6.2.4
Click to expand...
Click to collapse
You can't downgrade gpt and tz partition. You can only flash same signature version or higher.
rootdefyxt320 said:
You can't downgrade gpt and tz partition. You can only flash same signature version or higher.
Click to expand...
Click to collapse
Hello,
That is what i am looking i dont want to downgrade want to use same but from where i get same firmware?
efuzone said:
Hello,
I have latest drivers, latest RSD which you provided me. I have downloaded firmware which you given me it is giving gpt error, when i tried another one it is giving tz error and then again gpt error.
RSD Version is 6.2.4
Click to expand...
Click to collapse
Try this firmware here. It was the last update by Motorola. Here is the download link. https://www.androidfilehost.com/?fid=24269982087011676
Related
So i have a Droid Razr Maxx HD xt926
it is on the latest 4.2.1 ota
It was starting to run slow, so i figured it was time to root and get a custom rom. but what i didn't realize is you cant unlock boot-loader.
So i rooted the phone, no issues. i tried to flash TWRP and CWM and both failed.
So when i go to recovery all i get is a black screen with white writiing that says
AP Fastboot Flash Mode (s)
10.9B(#) (sha-1e9f, 2013-05-25 01:04:26)
eMMC info: Size 32GB
Divice is LOCKED, Status Code: 0
Battery OK
Connect USB
Data Cable
Failed to hab check for recovery: 0x56
Fastboot Reason: Boot Failure
I can exit out and get back to android.
Since i can get the bootloader unlocked (at least i dont think there is a way) i want to flash everything back to factory, it can be unrooted as well. just want a clean start on it.
any help would be great thanks.
Can't flash twrp or cm on locked bootloader.
Sent from my DROID RAZR HD using xda app-developers app
xlow78 said:
Can't flash twrp or cm on locked bootloader.
Sent from my DROID RAZR HD using xda app-developers app
Click to expand...
Click to collapse
Yea i figured that out, so i was triing to get it back to stock.
Figured too late though .
Did you try rsd lite?
Sent from my DROID RAZR HD using xda app-developers app
soloblazer said:
So i have a Droid Razr Maxx HD xt926
it is on the latest 4.2.1 ota
It was starting to run slow, so i figured it was time to root and get a custom rom. but what i didn't realize is you cant unlock boot-loader.
So i rooted the phone, no issues. i tried to flash TWRP and CWM and both failed.
.............
any help would be great thanks.
Click to expand...
Click to collapse
sounds like you jacked stock recovery. if it will boot up, try using this http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar to put the stock recovery back on. i cant say for sure it will work but i think it will.
bweN diorD said:
sounds like you jacked stock recovery. if it will boot up, try using this http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar to put the stock recovery back on. i cant say for sure it will work but i think it will.
Click to expand...
Click to collapse
If the bootloader is locked, it's highly unlikely that attempting to flash a recovery would've touched the stock recovery. With that being said, you can use one of the utilities to flash back to completely stock or use RSD and flash the most up-to-date XML from here:
http://sbf.droid-developers.org/vanquish/list.php
RikRong said:
If the bootloader is locked, it's highly unlikely that attempting to flash a recovery would've touched the stock recovery. With that being said, you can use one of the utilities to flash back to completely stock or use RSD and flash the most up-to-date XML from here:
http://sbf.droid-developers.org/vanquish/list.php
Click to expand...
Click to collapse
true but you have to modify files before rsd will work, and the utilities say dont use on the latest update (locked) unless there is one i haven't seen, correct?
bweN diorD said:
true but you have to modify files before rsd will work, and the utilities say dont use on the latest update (locked) unless there is one i haven't seen, correct?
Click to expand...
Click to collapse
I've never had to modify the XMLs to work in RSD, but you might have to for some of them. You can swap files in the utilities and put the newest update in there. Also, flashing your zip or any other zip should clear the flash fail.
RikRong said:
I've never had to modify the XMLs to work in RSD, but you might have to for some of them. You can swap files in the utilities and put the newest update in there. Also, flashing your zip or any other zip should clear the flash fail.
Click to expand...
Click to collapse
Hey guys thanks for all the answers, i will try this monday, sorry for late reply, had some things come up this weekend, so wont have time to work on it. I just want to get it back to completely stock since i cant unlock the bootloader and isntall custom rom.
soloblazer said:
Hey guys thanks for all the answers, i will try this monday, sorry for late reply, had some things come up this weekend, so wont have time to work on it. I just want to get it back to completely stock since i cant unlock the bootloader and isntall custom rom.
Click to expand...
Click to collapse
Ok guys i am ready to try. How do i flash a zip file if i cant get into recovery?
What should i try first?
soloblazer said:
Ok guys i am ready to try. How do i flash a zip file if i cant get into recovery?
What should i try first?
Click to expand...
Click to collapse
boot the phone up (just power on), after on plug it into your pc, use the tool i posted in #5 (just going off what RikRong said, any successful flash should clear the failure) flash "stock recovery", let it reboot and see if its fixed.
if its not fixed, im still under the impression you will have to do one of 2 things to fix it from what i read others post previously,
-replace the files in matts utility with the latest ones from the stock files, or
-modify the xml file in the latest sbf to get rsd to work without failing
bweN diorD said:
boot the phone up (just power on), after on plug it into your pc, use the tool i posted in #5 (just going off what RikRong said, any successful flash should clear the failure) flash "stock recovery", let it reboot and see if its fixed.
if its not fixed, im still under the impression you will have to do one of 2 things to fix it from what i read others post previously,
-replace the files in matts utility with the latest ones from the stock files, or
-modify the xml file in the latest sbf to get rsd to work without failing
Click to expand...
Click to collapse
First one worked, thanks guys, phone is good to go. Does anyone know if there will ever be a unlocker for the bootloader?
soloblazer said:
First one worked, thanks guys, phone is good to go. Does anyone know if there will ever be a unlocker for the bootloader?
Click to expand...
Click to collapse
unlikely
btw, i swapped the files in Matts utility for the latest update if you want it. im working on switching out the root method in it too to the new one.
its posted in the dev forum
CM10.1 Android 4.2.2 Razr HD XT925
Already installed various recoveries only my device so enter the stock recovery, bootloader unlocked with this, I want to install cm10.1.3 4.2.2 and I can not, can someone help me?
My Droid Razr HD is doing the same thing
My screen says all of that also.
its says its locked and the battery is ok and all of that
I was trying to root my phone which was unsuccessful.
Now I cannot start and run my phone properly.
when it comes on it has me choose a language and press start and then acts like its loading and says it may take a few minutes. It will do that for hours and never move on to the next step.
How did you fix yours and recover it?
None of the other options on the reboot screen work...
I had tried:
normal start up
AP fast Boot
Recovery
BP Tools
They all lead to the same thing with the language selection and so on.
What can I do?
McmanisCody said:
My screen says all of that also.
its says its locked and the battery is ok and all of that
I was trying to root my phone which was unsuccessful.
Now I cannot start and run my phone properly.
when it comes on it has me choose a language and press start and then acts like its loading and says it may take a few minutes. It will do that for hours and never move on to the next step.
How did you fix yours and recover it?
None of the other options on the reboot screen work...
I had tried:
normal start up
AP fast Boot
Recovery
BP Tools
They all lead to the same thing with the language selection and so on.
What can I do?
Click to expand...
Click to collapse
assuming you have a 926, re-flash it with this.
if you have a 925 do NOT use ^^ that. you will have to use rsd instead.
I am having a similar issue but my bootloader is unlocked and no matter what I flash to recovery recovery won't work anymore whether it being a factory reset or trying to just plain boot in to it.
CONC3PT said:
I am having a similar issue but my bootloader is unlocked and no matter what I flash to recovery recovery won't work anymore whether it being a factory reset or trying to just plain boot in to it.
Click to expand...
Click to collapse
on the bootloader screen it says "status code 3" correct?
you cant flash cwm or twrp with fastboot?
what exactly is it doing or not doing and does the flash dialog indicate it flashing ok?
you imply, you cant boot into recovery, then say a factory reset wont work. what happens exactly in either of those attempts?
after you flash a custom recovery, you have to power off the phone and boot right into it and flash the su zip (do not boot the system in between), you know that correct?
any other info you can provide that i may have left out could be helpfull in getting this working for you.
Hello everyone,
I know this tread is old but, I have a problem and I hope someone here can help me. I have a mot razr 926 with these specs:
android version 4.1.2;
System version 9.30.1.XT926.Verizon
Kernel 3.0.31 ( I believe is stock)
Build number 9.8.1Q-94-1
My phone was rooted before with stock rom; I had to do a factory reset; so I reset, rooted again and my mistake it was trying to unlock the bootloader ( I know, I know, it's 9.30....)
Now my problem is that I don't have "recovery" or I don't have access to it. Things that I have tried:
Moto utility 1.34
Moto utility 1.3 gpt fix
Razr HD Recovery flasher V7 (tried to install cwm and stock)
I'm just trying to get any recovery working.... any help would be appreciated
Thanks
kpitao said:
Hello everyone,
I know this tread is old but, I have a problem and I hope someone here can help me. I have a mot razr 926 with these specs:
android version 4.1.2;
System version 9.30.1.XT926.Verizon
Kernel 3.0.31 ( I believe is stock)
Build number 9.8.1Q-94-1
My phone was rooted before with stock rom; I had to do a factory reset; so I reset, rooted again and my mistake it was trying to unlock the bootloader ( I know, I know, it's 9.30....)
Now my problem is that I don't have "recovery" or I don't have access to it. Things that I have tried:
Moto utility 1.34
Moto utility 1.3 gpt fix
Razr HD Recovery flasher V7 (tried to install cwm and stock)
I'm just trying to get any recovery working.... any help would be appreciated
Thanks
Click to expand...
Click to collapse
Have you tried the stock recovery??, it can be tricky to get into stock recovery by pressing the correct combination of buttons
EDIT: You can use RSD Lite to update your phone to 182.46.10 and use Towelroot to re-root the phone. Once rooted, you can use Motoapocalypse to unlock bootloader.
EDIT 2: Read this thread: http://forum.xda-developers.com/droid-razr-hd/general/index-motorola-droid-razr-hd-2015-t3167557
I bought a Motorola XT925 on ebay branded Orange France and loaded with Jelly Bean 4.1.1 firmware.
The phone was sold to me as a 4G/LTE capable device. Not seeing an option for 4G/LTE in the phones menu, I then dug around the Orange France web portal. There it says the phone is not 4G/LTE compatible. This was confirmed by Motorola France.
So my big question: is the radio hardware in this Orange France phone the same as an XT925 that I would by from Rogers Canada, but just not initialized for 4G/LTE? Or is the actual Radio hardware different? Even Motorola France was not able to tell me over the phone about the exact hardware.
Do I have a hope to get 4G/LTE working on this phone?
I want to try a Rogers firmware on this phone, but don't want a 200,00$ paperweight.
Thanks for reading.
is the bootloader unlocked? check by booting into apfast mode. Moto website can unlock your BL if needed, after that you can test any firmware and flah any radio of course with caution .There is hope.
hbenz2008 said:
is the bootloader unlocked? check by booting into apfast mode. Moto website can unlock your BL if needed, after that you can test any firmware and flah any radio of course with caution .There is hope.
Click to expand...
Click to collapse
I have a custom recovery utility installed after rooting and unlocking the bootloader and just completed a backup on the phone. I figure since the phone is wearing jelly bean 4.1.1 I ought to be able to take the Rogers firmware jellybean 4.1.2 and flash that onto the phone. Just not sure how to make sure that the modem gets flashed when I do fastboot flash system system.img. So I am looking around to piece together the instructions on how to flash the modem or does the system image contain all I need for the modem and all else?
I kinda like the lock screen on the Orange.fr firmware -- has a sliding mute feature that might not stick around after a system flash. minor detail though as all I really want is a working LTE device.
Thanks
Rsd lite 6.1 to flash
hbenz2008 said:
Rsd lite 6.1 to flash
Click to expand...
Click to collapse
RSD Lite is a windows utility and at the present time I do not have a windows computer. I have unlocked the bootloader and flashed the recovery successfully with mfastboot for linux. So that;s where I am at. ( I find it ironic that a phone OS based oin linux should be largely dependent on a non-linux OS. Strange but true.
@hbenz2008 tell me about flashing the modem so that I can have LTE/4G access. What do I need to do?
excellent man, did you update to kitkat yet? you are free to try firmware from any carrier now. Look here for some Jelly Bean downloads to try:
http://sbf.droid-developers.org/phone.php?device=6
Then there are many ways to get on kitkat if you wish.
hbenz2008 said:
excellent man, did you update to kitkat yet? you are free to try firmware from any carrier now. Look here for some Jelly Bean downloads to try:
http://sbf.droid-developers.org/phone.php?device=6
Then there are many ways to get on kitkat if you wish.
Click to expand...
Click to collapse
I have downloaded the 4.1.2 Rogers firmware but to be honest I don't know exactly what or how to do with the zip file. I've opened the archive -- I even flashed the modem and all the rest of the blobs onto the phone, one by one based on a batch file from another archive. What happened was I lost my patience waiting for the phone to reboot as it appeared to be stuck on the Motorola boot logo. (Maybe it was rebuilding the cache??) I used the recovery to get the phone back. So if you can give me a clue as to what to do exactly with the firmware zip -- much appreciate your council.
i dont have a mac but i will try to get you some instructions. Under windows, we just rsd the xml file after extracting the firmware. This may help
http://forum.xda-developers.com/showthread.php?t=1165672
http://forum.xda-developers.com/showthread.php?t=994918
hbenz2008 said:
i dont have a mac but i will try to get you some instructions. Under windows, we just rsd the xml file after extracting the firmware. This may help
http://forum.xda-developers.com/showthread.php?t=1165672
http://forum.xda-developers.com/showthread.php?t=994918
Click to expand...
Click to collapse
I dug up an old netbook with xp on it and managed to use RDSlite it to flash the Rogers firmware and voila! Full service phone. except for one tiny snag. Earlier I had installed a custom recovery utility cwm6.2.2.8-XT925(epinter) and it worked. Now though the cwm recovery util got wiped and my subsequent attempts to re-install fail. I speak: "linux-fastboot flash recovery cwm.img. response: Max 30M sending recovery.
Weird it never progresses or finishes. Beginning to think I have the syntax wrong.
Try mfasboot
---------- Post added at 08:28 AM ---------- Previous post was at 08:26 AM ----------
Fastboot flash recovery recovery.img is the right cmd
hbenz2008 said:
Try mfasboot
---------- Post added at 08:28 AM ---------- Previous post was at 08:26 AM ----------
Fastboot flash recovery recovery.img is the right cmd
Click to expand...
Click to collapse
Thats what I have as a linux version (mfastboot). Got it from a link posted by @ATTACK and it worked properly before I flashed 4.1.2 today. I'll work on it at least now I have a phone that works and shows the options I was sold. Just wondering if RSDLite does something crippling when it writes the flash to the phone.
Rsd is clean. You can always try other recoveries. Cmw6.0.4.4 if I remember correctly works
---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM ----------
And twrp 6.0.
hbenz2008 said:
Rsd is clean. You can always try other recoveries. Cmw6.0.4.4 if I remember correctly works
---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM ----------
And twrp 6.0.
Click to expand...
Click to collapse
So something does seem to have changed. I no longer have permission to erase with the mfastboot utility. And I am refering to permission on the device not in my local shell. I sudo to the shell locally then run fastboot which returns the following:
gryphon platform-tools # fastboot erase recovery
(bootloader) Variable not supported!
erasing 'recovery'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.034s
gryphon platform-tools
the device status code is 3 and unlocked so I am baffled.
i have fought that error before but dont recall what solved it. Either another recovery or flashing with fastboot, or mfastboot.
hbenz2008 said:
i have fought that error before but dont recall what solved it. Either another recovery or flashing with fastboot, or mfastboot.
Click to expand...
Click to collapse
If you think of another possible solution let me know. As of now no fastboot utility works on my phone now.
At one point I also downloaded android sdk from Google and used fastboot tools/platform to flash things up.
hbenz2008 said:
At one point I also downloaded android sdk from Google and used fastboot tools/platform to flash things up.
Click to expand...
Click to collapse
I have the android-sdk installed and the fastboot included is known to cause problems with image files that are large. Thats where mfastboot comes in handy.
Now everytime I powercycle the phone fastboot appears on the screen and shows a failed flash notice. I'd like to clear up this issue pronto. what a pain . An adventurous pain
Maybe flash a different recovery with it hopefully overwrite what's in the phone. If not, flashing 4.1.2 with rsd and a fresh recover maybe an easier way. Even European 4.1.2 rtfr modified to get kk update. There is a thread:make your xt 925 updatable. Check it out, you may kill two birds with 5 stones
while you at it man, can you please grab "gps.conf " from system/etc and post here .It is about 2kb size. Merci
hbenz2008 said:
Maybe flash a different recovery with it hopefully overwrite what's in the phone. If not, flashing 4.1.2 with rsd and a fresh recover maybe an easier way. Even European 4.1.2 rtfr modified to get kk update. There is a thread:make your xt 925 updatable. Check it out, you may kill two birds with 5 stones
Click to expand...
Click to collapse
Good news! I got the fastboot flash failure flag cleared away and cwm recovery reinstalled. Still can't flash anything with fastboot of any stripe and I am betting this is because the image files in the sbf archive are signed. My phone is now vritualy identical to any Fido branded phone, complete with a Fido boot logo. Cute.
There ought to be a way to overwrite signed images, besides waiting for a new firmware release. The bootloader is unlocked and phone rooted yet fastboot flashing is not currently possible.
How can I unlock the signed images on my phone?
BTW heres my gps.conf. Whats your interest in this file?
Code:
#Test
#NTP_SERVER=time.gpsonextra.net
#Asia
# NTP_SERVER=asia.pool.ntp.org
#Europe
# NTP_SERVER=europe.pool.ntp.org
#North America
NTP_SERVER=north-america.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL = 2
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# supl version 1.0
SUPL_VER=0x10000
So i tried flashing the lollipop software to my moto g xt1032 (i am a noob at this) and i think i messed up my phone. It now wont go past the bootloader/fastboot screen. Before updating i was running android 4.4.2. When i initially boot up my phone it says version downgraded for boot, failed to validate boot image, fastboot reason: fall through from normal boot cycle i have tried to follow the many guides their are out there that work/i am too dumb to understand them. If anyone can please help me. If i did not give enough info please ask and i will try my best to give it to you.
austin66887 said:
So i tried flashing the lollipop software to my moto g xt1032 (i am a noob at this) and i think i messed up my phone. It now wont go past the bootloader/fastboot screen. Before updating i was running android 4.4.2. When i initially boot up my phone it says version downgraded for boot, failed to validate boot image, fastboot reason: fall through from normal boot cycle i have tried to follow the many guides their are out there that work/i am too dumb to understand them. If anyone can please help me. If i did not give enough info please ask and i will try my best to give it to you.
Click to expand...
Click to collapse
You need to flash android 5.0 factory image for boot, and system. Follow the regular fastboot procedures to flash the 5.0 firmware. Makr sure you don't downgrade back to kitkat once you flash lolipop or else YOU WILL END UP IN A HARDBRICK!!!!!
skyguy126 said:
You need to flash android 5.0 factory image for boot, and system. Follow the regular fastboot procedures to flash the 5.0 firmware. Makr sure you don't downgrade back to kitkat once you flash lolipop or else YOU WILL END UP IN A HARDBRICK!!!!!
Click to expand...
Click to collapse
as i said i am a noob i am not really sure how to do that
skyguy126 said:
You need to flash android 5.0 factory image for boot, and system. Follow the regular fastboot procedures to flash the 5.0 firmware. Makr sure you don't downgrade back to kitkat once you flash lolipop or else YOU WILL END UP IN A HARDBRICK!!!!!
Click to expand...
Click to collapse
i have been trying to flash 5 and when i go in to recovery and load the file through adb it goes for like 5 minutes then says installation aborted
austin66887 said:
i have been trying to flash 5 and when i go in to recovery and load the file through adb it goes for like 5 minutes then says installation aborted
Click to expand...
Click to collapse
You need to flash using fastboot not adb. Look around the forum there are some great tutorials for a beginner.
skyguy126 said:
You need to flash using fastboot not adb. Look around the forum there are some great tutorials for a beginner.
Click to expand...
Click to collapse
So I tried to flashing using fastboot and my device still wont load up
Were you trying to install GPE 5.0.1? Or the soak test for X1033?
austin66887 said:
So I tried to flashing using fastboot and my device still wont load up
Click to expand...
Click to collapse
You need to flash all the partitions.
motorola actually agreed send me a new one despite what i did so all is good
Hi buddies, I am new to flashing roms. I recently flashed a new recovery on my motorola droid hd, it succeed but after rebooting to recovery I realized that the resolution of safestrap recovery was larger than my screen so I could not use functions like "swipe to flash" and "swipe to unlock" or any other function at the lower end of the screen. So I turned it of and restarted then it says bootstrap disabled, it tries booting but spends forever when it gets to the red eye. I downloaded as "said to be" stock recovery and it flashed fine, but I still cannot to boot to my stock recovery. I need help to get my phone back..... please.
NB: * I tried flashing a rom with RSD Lite version 4 to 6 but the software cannot detect my phone in AP Fastboot mode.
* I have already install drivers from motorola and so many android drivers but still my phone is not detected (Only fastboot in command prompt sees it)
* Phone displays Device is locked, Status Code 0
* When ever I try flashing a recovery through fastboot cmd it starts and fails (Preflash validation failed, remote failure)
* Previous threads with links to download stock razr HD recovery and roms have broken links. (Please help me get a a stock recovery and rom)
kbolero said:
Hi buddies, I am new to flashing roms. I recently flashed a new recovery on my motorola droid hd, it succeed but after rebooting to recovery I realized that the resolution of safestrap recovery was larger than my screen so I could not use functions like "swipe to flash" and "swipe to unlock" or any other function at the lower end of the screen. So I turned it of and restarted then it says bootstrap disabled, it tries booting but spends forever when it gets to the red eye. I downloaded as "said to be" stock recovery and it flashed fine, but I still cannot to boot to my stock recovery. I need help to get my phone back..... please.
NB: * I tried flashing a rom with RSD Lite version 4 to 6 but the software cannot detect my phone in AP Fastboot mode.
* I have already install drivers from motorola and so many android drivers but still my phone is not detected (Only fastboot in command prompt sees it)
* Phone displays Device is locked, Status Code 0
* When ever I try flashing a recovery through fastboot cmd it starts and fails (Preflash validation failed, remote failure)
* Previous threads with links to download stock razr HD recovery and roms have broken links. (Please help me get a a stock recovery and rom)
Click to expand...
Click to collapse
What version of android were you running? The zero means means your bootloader is locked.
OGdroidster said:
What version of android were you running? The zero means means your bootloader is locked.
Click to expand...
Click to collapse
4.4 Kitkat
kbolero said:
4.4 Kitkat
Click to expand...
Click to collapse
Reflash stock rom. Just to make sure you have the correct drivers uninstall any drivers you may have tried before. Then install these drivers acording to witch system you are running 32 bit or 64 bit system; takling about your pc of course, for 32 bit use these drivers: https://www.androidfilehost.com/?fid=24269982087010422 , for 64 bit use these drivers: https://www.androidfilehost.com/?fid=24269982087010424 , next we are going to make sure rsd lite installed correctly because on windows installs don't always install correctly so uninstall the version or current one your using and use this rsdlite version it has never failed me: https://forum.xda-developers.com/attachment.php?attachmentid=3388466&d=1435873884 , Now flash the last version of kk moto firmware and you should be fine. Here is the stock firmware: https://www.androidfilehost.com/?fid=24269982087011676
If you run into complications let me know and ill help you. After we get it running you will need to reroot, but to use a custom recovery you will need TWRP not safestrap. To flash TWRP you need to unlock the bootloader witch you use the sun app for that and that app cost 25 bucks. You pay during the process
OGdroidster said:
Reflash stock rom. Just to make sure you have the correct drivers uninstall any drivers you may have tried before. Then install these drivers acording to witch system you are running 32 bit or 64 bit system; takling about your pc of course, for 32 bit use these drivers: https://www.androidfilehost.com/?fid=24269982087010422 , for 64 bit use these drivers: https://www.androidfilehost.com/?fid=24269982087010424 , next we are going to make sure rsd lite installed correctly because on windows installs don't always install correctly so uninstall the version or current one your using and use this rsdlite version it has never failed me: https://forum.xda-developers.com/attachment.php?attachmentid=3388466&d=1435873884 , Now flash the last version of kk moto firmware and you should be fine. Here is the stock firmware: https://www.androidfilehost.com/?fid=24269982087011676
If you run into complications let me know and ill help you. After we get it running you will need to reroot, but to use a custom recovery you will need TWRP not safestrap. To flash TWRP you need to unlock the bootloader witch you use the sun app for that and that app cost 25 bucks. You pay during the process
Click to expand...
Click to collapse
thanks a lot OGdroidster, I got it flashed to stock at a phone shop yesterday, but I will learn your steps above because I will need them in the future or any time I brick my phone
kbolero said:
thanks a lot OGdroidster, I got it flashed to stock at a phone shop yesterday, but I will learn your steps above because I will need them in the future or any time I brick my phone
Click to expand...
Click to collapse
Cool Download everthing and it ready to go for next time.
OGdroidster said:
Cool Download everthing and it ready to go for next time.
Click to expand...
Click to collapse
Okay
Are you going to root it and unlock the bootloader?
OGdroidster said:
Are you going to root it and unlock the bootloader?
Click to expand...
Click to collapse
I have already rooted it but Motorola is saying the phone does not qualify for bootloader unlocking. Do you have any idea to go around it (unlock bootloader)?
kbolero said:
I have already rooted it but Motorola is saying the phone does not qualify for bootloader unlocking. Do you have any idea to go around it (unlock bootloader)?
Click to expand...
Click to collapse
You have to use the sun app.
OGdroidster said:
You have to use the sun app.
Click to expand...
Click to collapse
Okay, you mentioned that earlier. I will try it.
Thanks.
I try to downgrade form Pie to Oreo but It's not work.
Now I can't install any thing (RUU exe firmware, TWRP), message error: FAILED (remote: 4 RU_BATTERY_LOW please connect charger (0% < 30%)). I charge my phone 100%. But anything change.
I can't boot to my TWRP or use "fastboot boot recovery.mg"
please help me and sorry for my bad english
kebaotu said:
I try to downgrade form Pie to Oreo but It's not work.
Now I can't install any thing (RUU exe firmware, TWRP), message error: FAILED (remote: 4 RU_BATTERY_LOW please connect charger (0% < 30%)). I charge my phone 100%. But anything change.
I can't boot to my TWRP or use "fastboot boot recovery.mg"
please help me and sorry for my bad english
Click to expand...
Click to collapse
Double check the drivers you are using for fastboot and adb.
I try with my xiaomi mi 9, everything is fine. I try also another version adb but nothing change.
I try also flash with download mode with file zip in sd card, but I have same error.
I let my phone discharge and recharge complete but it isn't work
what is your phone? HTC or Xiaomi?
if your phone is HTC u11, I think you flash wrong hosd_signed.img version
DHorseman said:
what is your phone? HTC or Xiaomi?
if your phone is HTC u11, I think you flash wrong hosd_signed.img version
Click to expand...
Click to collapse
I'm also on this. And can't install anything. How to do?
bubu2001 said:
I'm also on this. And can't install anything. How to do?
Click to expand...
Click to collapse
If stock ruu of your phone is android 7, you need 8.0 ota file to get hosd_signed.img file, flash it again an you can go back stock by flash ruu
DHorseman said:
If stock ruu of your phone is android 7, you need 8.0 ota file to get hosd_signed.img file, flash it again an you can go back stock by flash ruu
Click to expand...
Click to collapse
Look, i put here the print screens to see i cannot flash.
Also, please let me know which one from table should I use
I did change the phone type, it was EVE__01, now is other.
Please advise.
bubu2001 said:
Look, i put here the print screens to see i cannot flash.
Also, please let me know which one from table should I use
I did change the phone type, it was EVE__01, now is other.
Please advise.
Click to expand...
Click to collapse
With this error I got before. It mean the hosd_signed of your phone not match with your current rom/baseband. You need find the hosd_signed.img match with current baseband and flash it again, then you can flash recovery or stock ruu. I see your phone is Vodafone_UK. You can google to find stock ruu and find htc ruu extract tool to get hosd_signed.img file
DHorseman said:
With this error I got before. It mean the hosd_signed of your phone not match with your current rom/baseband. You need find the hosd_signed.img match with current baseband and flash it again, then you can flash recovery or stock ruu. I see your phone is Vodafone_UK. You can google to find stock ruu and find htc ruu extract tool to get hosd_signed.img file
Click to expand...
Click to collapse
Well, what i do:
I take the rom update utilities for my phone, now I've downloade 2PZCIMG_OCEAN_UHL_N71_SENSE90GP_Vodafone_UK_1.03.161.6_Radio_8998-001791AE-1705110032_release_503500_signed_2_4_3
I use RUU_Decrypt_Tool to decript file and I take the file hosd_signed.img and flash under bootloader - everything ok.
When I enter in download mode or in RRU update mode, it gives error that the phone is not charged, but the phone is more then 60% charged (80 to be honest )
Here is where i get jammed.
And don't know what to do.
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
bubu2001 said:
Well, what i do:
I take the rom update utilities for my phone, now I've downloade 2PZCIMG_OCEAN_UHL_N71_SENSE90GP_Vodafone_UK_1.03.161.6_Radio_8998-001791AE-1705110032_release_503500_signed_2_4_3
I use RUU_Decrypt_Tool to decript file and I take the file hosd_signed.img and flash under bootloader - everything ok.
When I enter in download mode or in RRU update mode, it gives error that the phone is not charged, but the phone is more then 60% charged (80 to be honest )
Here is where i get jammed.
And don't know what to do.
Click to expand...
Click to collapse
Thanks for quick reply
bubu2001 said:
Well, what i do:
I take the rom update utilities for my phone, now I've downloade 2PZCIMG_OCEAN_UHL_N71_SENSE90GP_Vodafone_UK_1.03.161.6_Radio_8998-001791AE-1705110032_release_503500_signed_2_4_3
I use RUU_Decrypt_Tool to decript file and I take the file hosd_signed.img and flash under bootloader - everything ok.
When I enter in download mode or in RRU update mode, it gives error that the phone is not charged, but the phone is more then 60% charged (80 to be honest )
Here is where i get jammed.
And don't know what to do.
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
Thanks for quick reply
Click to expand...
Click to collapse
I don't get it ... my battery is charging connected to usb 3 port and shows that. Seems to be too much. Is this a deffective battery?
bubu2001 said:
Well, what i do:
I take the rom update utilities for my phone, now I've downloade 2PZCIMG_OCEAN_UHL_N71_SENSE90GP_Vodafone_UK_1.03.161.6_Radio_8998-001791AE-1705110032_release_503500_signed_2_4_3
I use RUU_Decrypt_Tool to decript file and I take the file hosd_signed.img and flash under bootloader - everything ok.
When I enter in download mode or in RRU update mode, it gives error that the phone is not charged, but the phone is more then 60% charged (80 to be honest )
Here is where i get jammed.
And don't know what to do.
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
Thanks for quick reply
Click to expand...
Click to collapse
Ok, I understood. You go back to stock from android 9, and stock is android 7. If yes, you need flash hosd_signed.img from android 8 ota file, not from ruu.
DHorseman said:
Ok, I understood. You go back to stock from android 9, and stock is android 7. If yes, you need flash hosd_signed.img from android 8 ota file, not from ruu.
Click to expand...
Click to collapse
I have installed android oreo 8.0. But it cannot be updated and I cannot write anything in download mode.
I want stock ,so I can update and write with fastboot.
bubu2001 said:
I have installed android oreo 8.0. But it cannot be updated and I cannot write anything in download mode.
I want stock ,so I can update and write with fastboot.
Click to expand...
Click to collapse
please download latest adb version and try to flash TWRP again
https://dl.google.com/android/repository/platform-tools_r30.0.1-windows.zip
Will try. The thing is that I cannot flash anything in download mode because of that error, battery low. Not because of drivers.
I use Win 10 and everytime I need to put back driver .... everytime I connect, but I put it back and the computer sends info to phone, but phone won't write because of that battery error.
bubu2001 said:
Will try. The thing is that I cannot flash anything in download mode because of that error, battery low. Not because of drivers.
I use Win 10 and everytime I need to put back driver .... everytime I connect, but I put it back and the computer sends info to phone, but phone won't write because of that battery error.
Click to expand...
Click to collapse
I got this error before when I downgrade from android 9 to android 7. The reason is I flash wrong hosd_signed.img file version, so the phone can't get battery info
DHorseman said:
I got this error before when I downgrade from android 9 to android 7. The reason is I flash wrong hosd_signed.img file version, so the phone can't get battery info
Click to expand...
Click to collapse
This I understand, the problem is I don't know which one to choose from table for my phone.
bubu2001 said:
This I understand, the problem is I don't know which one to choose from table for my phone.
Click to expand...
Click to collapse
If you downgrade from android 9, I think you can't. Because i don't see any ota file for your phone. Your phone version is vodap001 (Vodafone_UK)
DHorseman said:
If you downgrade from android 9, I think you can't. Because i don't see any ota file for your phone. Your phone version is vodap001 (Vodafone_UK)
Click to expand...
Click to collapse
Is there a way to write CID and MID while in Bootloader? There I can write, os is booting but it is not rooted and I can't use properly adb under os to change CID and MID
bubu2001 said:
Is there a way to write CID and MID while in Bootloader? There I can write, os is booting but it is not rooted and I can't use properly adb under os to change CID and MID
Click to expand...
Click to collapse
I think no way to write CID and MID in the bootloader. If you can boot into the os, you can try to root with Magisk (without TWRP)