Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
My device yuphoria is hard bricked
I tried falshing stock rom n recovery still not working
Moreover i cannot boot into recovery mode.it only boots in bootloader mode
I have a twrp bckup in pc
So is there any way i can flash twrp bckup via pc??
(-vinner-) said:
My device yuphoria is hard bricked
I tried falshing stock rom n recovery still not working
Moreover i cannot boot into recovery mode.it only boots in bootloader mode
I have a twrp bckup in pc
So is there any way i can flash twrp bckup via pc??
Click to expand...
Click to collapse
i have never seen it done.
bweN diorD said:
i have never seen it done.
Click to expand...
Click to collapse
Same here... I don't think it's possible
G920IDVU3DOL5 can't flash twrp
what should i do??
i hv flash it with ODIN many times it has pass message bt after boot into stock recovery
currently dol5 is having problems with root
you can download DOK9 from sammobile and then root without any problem
there isn't much difference between them that matters
i hv intalled ok9 and when i start recovery it only shows samsung logo
brijen1995 said:
i hv intalled ok9 and when i start recovery it only shows samsung logo
Click to expand...
Click to collapse
flash UniKernel v8-0002 using odin in download mode
http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Okay so you are unable to boot your device in recovery mode. You can download stock recovery or any custom recovery for your device and then again flash it using flashify. Hope it will work. If its not working let me know by replying. :good:
Flashify is unable to flash stock n custom recovery in my mmx a106. I tried it but i got same issue as amlesh
Whats you need to do is to install sp flash tool on your pc and the stock rom for your mmx unite 2 lollipop .then install sp flash tool and and execute the program ...then there will be a command 'Scatter file' ....click on that and open that in fhe Firmware folder of your Stock Rom ....the connect ur device using usb cable and then click download in the sp flash tool......after completing that disconnect ur devices and reboot it....
Wrong Choice!
Flashify and Twrp are both bad for Unite 2!
You would have flashed the Philz Recovery with SP FLash tool and then flashed the TWRP recovery using it!
Now Still you can do the same
Just google philz recovery and you will get a detailed answer there!
If you like this hit THANKS
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Your phone appears to have gone into a bootloop.
Here is what you can do as you can't get into the system and reboot into recovery mode. Just confirm if you are doing it the correct way.
To enter Recovery mode - turn phone completely OFF.
Recovery = Vol Down + Power (hold both down for several seconds)
This button press procedure varies with each device/model of phone.
Click to expand...
Click to collapse
If the above steps failed, proceed down below.
Things you will need:
1) USB to PC connecting cable
2) A PC where you can download one of the tools to recover (MTKDroid/SpFlash along with the device specific Scatter file)
3) USB drivers installed on your PC to connect with your phone
4) Patience to read references and follow the steps to flash recovery using Tool
CAUTION: Do steps at your own risk. Do not hesitate to ask if not sure. Post restoring recovery successfully, if you plan to flash a Custom ROM, suggest taking a backup from device using TWRP OR atleast the NVRAM using MTKDroid Tool so that you do not run into issues resulting with SIM showing No Network/Service.
Click to expand...
Click to collapse
References: (Some of the community folks have done the hard work to publish these)
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
Installing custom recovery using SP Flash Tool(COMPLETE TUTORIAL)
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
https://forum.xda-developers.com/showthread.php?t=2730031
[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Ensure to have the latest versions of TWRP and the flash tools MTKDroid AND/OR SPFlash.
To let you know, I've used the recoveries viz. CTR, TWRP, CWM, Philz on MMX a106 and haven't experienced any issues at all. Neither have I had any issues with Flashify as reported by some. Anyways its a personal experience
NOTE: If the issue is already resolved by now, please help others know it with your fix.
Click to expand...
Click to collapse
Hope this helps, happy restoring
Finally, Thank if you feel helped.
I have flashed an unofficial custom rom using twrp...but it didnt work...thats why i flashed stock recovery using twrp then flashed c.57 ozip file of realme 5i...now i dont have anything left without fastboot...but the real problem lies in that thr fastboot automatically reboots itself within every 15 sec...and i have tried to flash twrp within that 15 sec...but i found no recovery...and thus the problem remains same...
Someone please help me out of this i am really in a mess!!!
turjo8102 said:
I have flashed an unofficial custom rom using twrp...but it didnt work...thats why i flashed stock recovery using twrp then flashed c.57 ozip file of realme 5i...now i dont have anything left without fastboot...but the real problem lies in that thr fastboot automatically reboots itself within every 15 sec...and i have tried to flash twrp within that 15 sec...but i found no recovery...and thus the problem remains same...
Someone please help me out of this i am really in a mess!!!
Click to expand...
Click to collapse
Happen to me once, just connect your phone to laptop open ADB fastboot and quickly type " fastboot devices " and when you lucky it will show your phone, hope you ubl first
armuttaqin said:
Happen to me once, just connect your phone to laptop open ADB fastboot and quickly type " fastboot devices " and when you lucky it will show your phone, hope you ubl first
Click to expand...
Click to collapse
bro Reply
Bro how wd u install twrp in rmx 2030 plzz help me.!
same problem. please help me. how can I fix it? fastboot restart 10 to 15 seconds... my phone dead. plz
DEECAY00 said:
Bro how wd u install twrp in rmx 2030 plzz help me.!
Click to expand...
Click to collapse
Bro you can use orange fox or pitch black recovery
DEECAY00 said:
Bro how wd u install twrp in rmx 2030 plzz help me.!
Click to expand...
Click to collapse
First flash vbmeta and then flash orange fox or pitch black recovery