Hey all,
I was hoping that someone here could please offer some advice that I'm having with my tablet. Using the Note 10.1 GT-N8000
So at the weekend I had an issue where the tablet just kept freezing on me, screen wouldn't time out, clock wouldn't update etc. So after several reboots I figured the only thing for it would be to wipe it and start again. So after getting to recovery mode I wipe the cache and then eventually did the full wipe thing. Booted up after that as expected like brand new so I did the whole reinstalling my apps and what not thinking everything was a-ok. So I came back to it a lil later and it's off (so i think the batts just died on me) plug it in and put it on charge and boot up and it won't get past the 'Galaxy Note 10.1' screen and just cycles in a constant loop. I tried to then go to recovery mode again and whilst the holding up and power gets me to the screen I would first see the android logo with the energy belly (no menu options appear) and it would instantly switch to an android logo on it's back with a red exclamation mark icon atop it, before returning to the boot loop. I've tried to get into Odin mode which i can successfully do.
I've looked at some threads here about similar issues but tbh with some terminology used I'm a bit unfamiliar with so was lost on them quite easy, my knowledge on these issues being rather basic.
If anyone could offer any assistance I would be most grateful
Thanks
Flash stock rom from sammobile viaOdin.
Sent from my SM-N930F using XDA-Developers mobile app
Related
Ok so I have tried on another thread that kind of went dry mainly cause I was MIA....but now I am back and have done some more reading up and think it is safe to say rooting and trying customer ROM's is not for me...lol I pretty much messed up a new Galaxy Tab 2 7' brand new only after a few weeks trying to root it. I had another thread link below:
http://forum.xda-developers.com/showthread.php?t=1834368&page=2
But I did not get anything to work right. At this point I am really just looking to get the tablet working. I don't really care what firmware rooted or unrooted...i just want to be able to use it....do some more research and and maybe join the rooting community again when I get a Galaxy S3.
I'd appreciate any help. I am pretty stuck right now!
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
bark777 said:
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
Click to expand...
Click to collapse
Worked like a charm....you made it simple! Thanks!
Continous boot loop on tab 2 p3113
My problems are kind of different from all the others I have read. Yes it is similar that it boot loops. But mine freezes at different areas in boot mode. This is driving me crazy and I am spending way too much time and effort trying to fix it. Hopefully you can help.
I don't really know for sure if the android os was 4.1.1 or 4.1.2 or some other rom but it did state in download mode that it was original and not custom rom.
I received this tab from ebay and it is new never used, but somehow whoever had it probably tried to flash it and now I received it with a continuous loop. They stated that it stuck in SAMSUNG logo. I found it true but it also stuck other places as well. I did do a reset first before I attempted to flash it.
I did the Odin flashing.I found the 4.2.2 xar file HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 and did according to instructions. But that didn't work. It did boot into android but it didn't stay there very long and rebooted itself. I couldn't stay more than 20-30 seconds and it would reboot itself or freeze at various places in android. I also hard reset it. Still same thing. It would also freeze on the first samsung logo tab 2 screen and also at the blue circle with samsung logo. It was different every time. I would have to hold down the on button until it rebooted. It also stalls or freezes during Android upgrading... Optimizing app at various number stages sometimes it goes thru that and then to the next phase of installing apps then it freezes again. I cannot get it to work if I try to upgrade via wireless upgrade to samsung. it will freeze even before it downloads the upgrade file.
I then flashed back to the original xar file P3113UECLK7_P3113XACCLK7_XAC which is 4.1.1 That worked a little better, but it freezes and also the sound chatters when it freezes on bootup you know, when the samsung sound comes on then the blue circle.
Finally I tried to recover or flash from the recovery mode using the upgrade from a sdcard. using the original 4.1.1 xar file. It hewlped a little but still doing the continuous boot loop at different stages but it gets to the Android is upgrading... more often. It freezes always now.
So I don't know what else to do. You mentioned a CMOC10-Kernel to load, how does one go about doing that and what are the steps.
Thanks in return if you can suggest things.
Wayne
I'm having an unusual problem for me I've not came across this before, I can get my tab 2 - 5110 to boot into download mode but not recovery mode, It will boot to the rom normally when I shut it down completely to the charge battery animation will it boot up normally. If I try restarting the tablet by holding in the power button then releasing it at the samsung logo it just goes to a blank black screen also kies nor odin recognises my tablet its a very unusuall problem for me and I've tried everything I know to try fix it but with no success so far, I was running phils touch recovery and brolees 3.0 themed rom, my tablet worked perfectly until I tried to install brolees 4.0 over the top of his previous one the 3.0 which I thought would have been straight forward, at first it wouldn't get past the samsung logo but I worked out if I can get it to shut down to the charge battery animation it will boot normally but it reloads the apps everytime, anyhoo if anyone has had a similar issue or knows what stupid mistake ive made I would really appreciate any help, thank you in advance!
I cannot get my gt2 10 to boot and keep recovery
Sent from my GT-P5113 using Tapatalk 4
Hi there everyone, recently signed up on here as xda seems to be the holy grail when it comes to all thing smartphone.
I'm fairly new to these type of phones and recently was given an infuse 4g that was suffering a power button problem.
The power button problem has been resolved with a new one and the phone was working fine for 3 / 4 weeks.
One day the phone shut down by itself and entered the boot loop syndrome. Factory clearing it hasnt seemed to do anything to resolve the problem as it continued to reboot continuosly.
I came across the thread about gtg ultimate unbrick guide in the developers forum and this seemed like a good way to go, get the phone all the way back to stock and then work from there.
Kies installed and all drivers installed fine. downloaded the gtg unbrick pack and followed the instructions line for line. Odin reports everything passed, took about 2:59 to complete.
phone rebooted and continued to do boot loop so went into recovery as stated and wiped data and cache and rebooted again.
phone is still stuck in some sort of boot loop, but it gets to display the 1st of the setup android phone screens, then just as you get a chance to select next to go onto the next screen, the phone reboots.
Any one have any idea what could be going wrong or as im fairly new to this, is there anything im doing or not doing right that is causing this.
The phone is an at&t infuse.
regards
Trevor
sound like an issue with stuck power button. it's a know issue with this model. google "infuse 4g boot loop" there's few youtube videos you can try.
tt33333 said:
sound like an issue with stuck power button. it's a know issue with this model. google "infuse 4g boot loop" there's few youtube videos you can try.
Click to expand...
Click to collapse
I've already replaced the power button with a new one, but the technician i use did say he will remove the power button completely to see if it does the same, just to rule that out
Trev
just redone the gtg flash and it boots into the os (ver2.2.1) and then within about 5 seconds turns off and reboots
can the new on off switch be faulty......im not so sure as in recovery mode, i can leave it on that screen forever and it doesnt attempt to reboot
Tried the one click repair with hemdial or what its called, updating thisnpost via a moto defy mini so excuse any typos.. The hemdiaOl just seemed to meas it up further. So got baxk into downliad mode with odin and reflashed to gtg brick recovery. Not fixed, still booting but at least the screen is now viewable.
To recover one of these phones, is there like a definitive guide as to what to do to first prepare one of these phones for recovery, ie, first, flash to this with cwm and then clear data, cache, dalcik etc. like an idiots fuide, i feel i may need one
Regards
Trev
Samsung Galaxy S5 G900A (AT&T)
Previously on a day off I became very bored, and decided to root my phone. After playing around with everything for a day i did not like it. So i just went into recovery mode and did factory rest on my phone. Now I used supersu and a basic root everything worked perfect after i rooted it. But once I tried to put the stock firmware back on my phone it started acting funny. With showing Unfortunately Context Service has stopped. It was so absurd my phone couldnt function properly. I tried flashing the stock firmware on there in hopes that it would fix my problem, but it only made my phone completely inoperable. I have been trying multiple ways to fix this using odin v3.09 and odin v 3.10.6. Here are some of the files I have tried to get my phone back to stock. (G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5) I have tried downgrades. Odin seems to fail on every single one besides this set up (AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5) (CP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5) (CSC_ATT_G900AATT1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5) Odin loads those three files onto my phone perfectly with in 3 minutes but after they are installed on my phone. When i power it up it gets through the first screen and only shows half of the samsung logo freezes and goes to a black screen with a blue light. I have been working at this problem for a little over a week a couple hours a night and i really can not seem to make any progess. Help would be greatly appreciated.
Still having troubles
Flashes firmware perfectly fine but still can not seem to get past the samsung logo loading super slow and then just cutting out and going to a black screen with a blue stationary light on top left of phone.
Still looking for advice
bump
ksutinen said:
Flashes firmware perfectly fine but still can not seem to get past the samsung logo loading super slow and then just cutting out and going to a black screen with a blue stationary light on top left of phone.
Still looking for advice
bump
Click to expand...
Click to collapse
Boot into recovery mode and do full wipes wipe cache ,wipe del Vick cache,factory reset
I think this will resolve your problem
Regards
Mohamed786
model: sm-t320 wifi only, just flashed cm13 nightly, i believe it was the one released on the first of February 2016, the tablet was working okay sometimes a bit laggy but that is expected with the nightly not fully developed or whatever. i installed and am still using cm13 on my tablet but i installed it on my friends tablet which is the exact same tablet, color and all, and this happened: it shut of by itself and when i tried to turn it back on it wouldnt. i plugged it in and the battery charging icon turned on but it was only the icon with the loading circle image in the middle. so i let it charge for a good six hours and during that the screen stayed on with the same image. when i unplugged it, after about two seconds the screen dimmed and started flashing on and of as if there was a loose connection. then it just shuts off. when it is unplugged i cant do anything, (turn on, download mode, recovery) the screen just stays blank. when i have it plugged in i can access the first boot screen displaying "samsung galaxy tab pro" and it will not go any further. i can also access download mode perfectly. i cannot access recovery mode, it just goes straight to the first boot screen. i tried flashing the stock rom and was unsuccessful. either because the computer was not supplying enough voltage/amps to keep the tablet running or it just simply would not boot. the flash was successful each time i tried on odin but the same issues happened on the tablet each time. i did not install Gapps because he just wanted to try it out quickly and maybe keep it or go back to stock if (that helps). i believe that is all i know. please help me!
XDA Visitor said:
model: sm-t320 wifi only, just flashed cm13 nightly, i believe it was the one released on the first of February 2016, the tablet was working okay sometimes a bit laggy but that is expected with the nightly not fully developed or whatever. i installed and am still using cm13 on my tablet but i installed it on my friends tablet which is the exact same tablet, color and all, and this happened: it shut of by itself and when i tried to turn it back on it wouldnt. i plugged it in and the battery charging icon turned on but it was only the icon with the loading circle image in the middle. so i let it charge for a good six hours and during that the screen stayed on with the same image. when i unplugged it, after about two seconds the screen dimmed and started flashing on and of as if there was a loose connection. then it just shuts off. when it is unplugged i cant do anything, (turn on, download mode, recovery) the screen just stays blank. when i have it plugged in i can access the first boot screen displaying "samsung galaxy tab pro" and it will not go any further. i can also access download mode perfectly. i cannot access recovery mode, it just goes straight to the first boot screen. i tried flashing the stock rom and was unsuccessful. either because the computer was not supplying enough voltage/amps to keep the tablet running or it just simply would not boot. the flash was successful each time i tried on odin but the same issues happened on the tablet each time. i did not install Gapps because he just wanted to try it out quickly and maybe keep it or go back to stock if (that helps). i believe that is all i know. please help me!
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Based on the model number you've provided, this is the homepage for your device:
Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Guides and other helpful information can be found in the General Section.
If you create an XDA account, you can ask your questions in the Q&A Section.
Good luck and welcome to XDA!