{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Remote Play 2.5.0 for any Android Device 5.0+
Requirements:
Should work Android 4.4+ (not tested yet)
Android 5.0+ (tested & Working)
ROOT!!!
Transparent Gamepad for full gaming Experience
New Version: Invisible Mod V2.0
Manual:
For non Sony-Users extract the files from this zip to your System Folder. (You see the Folder Structure in Zip File).
It contains Sony's Framework.
Set the Permissions of that 4 Files to rw-r-r.
I'm not responsible for any damage to your phone.(If you don't know how to use this files, read in xda forum and leave this page please.)
Sony Framework:
https://drive.google.com/file/d/0B7YFda4eYESlb0hWTGFxQmZ4dFU/view?usp=drivesdk
After this, reboot your phone and install PlayStation Remote Play Mod by CGS (I just mirror here. Credits to CGS for his Work. Really appreciate it!)
Download PlayStation Remote Play Mod by CGS:
https://drive.google.com/file/d/0B7YFda4eYESlQUNxaXRsMnJWeWs/view?usp=drivesdk
Now download Invisible Mod Final V2.0 by eric9401
Open the following Folder with your desired File Manager (Attention! You need a File manager that is able to change permissions. I preffer ES File explorer)
- Open: data/app/com.playstation.remoteplay-1
-Overwrite the base.apk with my modified Version.
-Set the rights of base.apk to rw- r-- r--
-Now start the app and log in to your PSN Account.
-Get a cooled Beer from your Fridge!
-Disable Vibration at touch in Settings
Play till there's no tomorrow!
Download: Invisible Mod Final V2.0 by eric9401
https://drive.google.com/file/d/0B7YFda4eYESlbTFWaW5BdnFwTXc/view?usp=drivesdk
To play it with yor DS4 Controller you'll need Sixaxis Controller App and a mapping File.
Sixaxis Controller App:
https://play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller
Mapping Profile for Sixaxis App:
http://kd.ee-it.de/RPSCM.zip
Be sure to load the mapping as Touch Profile
Tested on S8+ on Note 8 Port Rom
Works great with Sixaxis Controller App and DS4
Tested with PS4 Pro at 1080p
Find the old Stuff of V 1.5 here:
Xposed Framework
-----------------------------------------------------------------------------
For non Sony-Users install this zip from your custom recovery. It contains Sony's Framework.(Please make a Backup before flashing. I'm not responsible for any damage to your phone. If you don't know how to use this files, read in xda forum and leave this page please.)
Sony's Framework (flashable Zip):
http://kd.ee-it.de/URPI.zip
Then install the original RemotePlay
1.5.0 APK and use Rootcloak to hide SuperSU/Root Access. (Don't forget to enable Module and restarting your Device!)
Original RemotePlay 1.5.0 APK:
http://kd.ee-it.de/RemotePlay1.5.0.apk
To play it with yor DS4 Controller you'll need Sixaxis Controller App and a mapping File.
Sixaxis Controller App:
https://play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller
Mapping Profile for Sixaxis App:
http://kd.ee-it.de/RPSCM.zip
Screenshots of original App:
You can use the app via mobile Data, by simulating Wifi Connection with Fake Wifi Xposed Module in Xposed Framework also.
If you disconnect, you'll have to terminate and reopen the remote play app to connect over mobile Data.
-----------------------------------------------------------------------------
Transparent Gamepad for full gaming Expirience
RemotePlay_1.5.0_eric9401_MOD_V2:
http://kd.ee-it.de/base.apk
-Follow the upper instructions.
-Now download my base.apk file.
-Open the following Folder with your desired File Manager (Attention! You need a File manager that is able to change permissions. I preffer ES File explorer): data/app/com.playstation.remoteplay1
-Overwrite the base.apk with my modified Version.
-Set the rights of base.apk to rw- r-- r--
-Now start the app and log in to your PSN Account again.
-Get a cooled Beer from your Fridge!
Play till there's no tomorrow!
Changelog:
Stock App = V0:
Original apk fully working with Touch-Gamepad
Screenshot:
RemotePlay_1.5.0_eric9401_MOD_V1:
R1 Key & Triangle modified to transparent. Got the App to work with my modifications.
Screenshot:
RemotePlay_1.5.0_eric9401_MOD_V2:
Fully working with transparent Touch-Gamepad for use with Controllers.
Screenshots:
Proof Video:
https://www.youtube.com/watch?v=RwitlBAr_Mc&feature=youtu.be
Known Bugs:
At the moment L3 and R3 are working through double press.
When you use PS Button you need to close it again by typing the little x.
To use Share and Option you need to hit PS-Button first. (the menue needs to open up)
In Progress/ Planned :
RemotePlay_1.5.0_eric9401_MOD_V3 with Native DS4 Controller Support. (In contanct with Dancingpixelstudios-Team)
Tested and working on following Devices:
Google Nexus 7 (2013), Android 6.0.1 Rom
Google Nexus 10
HTC Desire 820, Android 6.0.1
HTC 10 (Sprint) Viper 10 3.1 Android 6.0.1 Rom
LG G3
Nexus 6p on Nougat
Nvidia Shield K1
Samsung Galaxy S4 CM13
Samsung Galaxy S5 running 5.0
Samsung Galaxy S6 edge Note 7 port Rom
Samsung Galaxy S7 edge 6.0.1 TekHD
Samsung Galaxy S7 edge (Sprint)
Samsung Gaalaxy Note 3 at&t
Samsung Galaxy Tab S running 5.1
Sasmung Galaxy Tab S2 SM-T710 (Twrp Recovery & Neked-Nook-710-Xposed-Odexed Rom)
Samsung Galaxy Tab Pro 8.4 with Slim6 6.0.1
Sasmung Galaxy Tab Pro 8.4 running CM13
-----------------------------------------------------------------------------
Thank you all for your help!
Special thanks to kiosho for the needed original Files! (Old Version)
Lucifer_90 for his mapping for DS4.
Special thanks to Sony92 to help me find the "pushed" L2/R2 button!
Feel free to upload mirrors and share my work. But don't sell it as your own. I added Pictures to identify it
If you like my work and you want to give me something back, hit Donate and buy me a beer
Bought me a Beer so far:
Dreary
Seho Yu
Vladimir Stojic
Florian Hunger
F4T4LITY
Have a nice day!
Eric
Doesn't work with HTC One M8
Here's what I've done so far
1) Unlocked bootloader
2) Flashed TWRP recovery
3) Rooted phone with SuperSU-v2.78-201609011115.zip
4) Installed URPI.zip in TWRP
5) Installed the offical RemotePlay 1.5 apk
6) Used SuperSU app to disable super user
7) Used RootCloakPlus to hide root privileges from RemotePlay
In the end I get: "An error has occurred. (88001003)". I'm new so I can't post screenshot
Did I do something wrong?
dpechiu said:
Here's what I've done so far
1) Unlocked bootloader
2) Flashed TWRP recovery
3) Rooted phone with SuperSU-v2.78-201609011115.zip
4) Installed URPI.zip in TWRP
5) Installed the offical RemotePlay 1.5 apk
6) Used SuperSU app to disable super user
7) Used RootCloakPlus to hide root privileges from RemotePlay
In the end I get: "An error has occurred. (88001003)". I'm new so I can't post screenshot
Did I do something wrong?
Click to expand...
Click to collapse
Step 6 and 7 are wrong. Don't disable super user with supersu. Also, you need xposed installed as well, using rootcloak (the xposed module rather than official app from play store) to hide both remoteplay and supersu.
---------- Post added at 02:58 AM ---------- Previous post was at 02:56 AM ----------
dpechiu said:
Here's what I've done so far
1) Unlocked bootloader
2) Flashed TWRP recovery
3) Rooted phone with SuperSU-v2.78-201609011115.zip
4) Installed URPI.zip in TWRP
5) Installed the offical RemotePlay 1.5 apk
6) Used SuperSU app to disable super user
7) Used RootCloakPlus to hide root privileges from RemotePlay
In the end I get: "An error has occurred. (88001003)". I'm new so I can't post screenshot
Did I do something wrong?
Click to expand...
Click to collapse
Also just want to confirm this works on oneplus one.
Would this method have any adverse effects if done on a Nvidia Shield K1 Tablet?
Hi. I have no issue getting the app to work and connect to my ps4. But I can't get my controller to work during remote play
It works everywhere else on my tablet just not when using remote play. I'm using the six access app, but can't figure out how to load the mappings you posted. Not sure if that's the cause of my problems??
Any help would be much appreciated!
Confirmed method works on Galaxy S5 running 5.0 and Galaxy Tab S running 5.1 hells yea, thank you so much guys! As for controller, I've just been using 2nd account method for now, sorry can't give more help than that.
Sent from my SM-G900V using Tapatalk
Dreary said:
Hi. I have no issue getting the app to work and connect to my ps4. But I can't get my controller to work during remote play
It works everywhere else on my tablet just not when using remote play. I'm using the six access app, but can't figure out how to load the mappings you posted. Not sure if that's the cause of my problems??
Any help would be much appreciated!
Click to expand...
Click to collapse
Controller is working trough Touch Emulation & Mapping in Sixaxis Controller App.
Native not working at the moment.
DigiR00tz said:
Confirmed method works on Galaxy S5 running 5.0 and Galaxy Tab S running 5.1 hells yea, thank you so much guys! As for controller, I've just been using 2nd account method for now, sorry can't give more help than that.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Thank you for your Feedback!
works on my Sprint Galaxy Note 4
installed the fake wifi xposed module and added the remote play app to it and now I can connect over 4G?
side note if u disconnect u have to terminate and reopen the remote play app to connect over mobile data again
eric9401 said:
Controller is working trough Touch Emulation & Mapping in Sixaxis Controller App.
Native not working at the moment.
Click to expand...
Click to collapse
Thank you! It's working great now.
Now if we could only get rid of the on screen buttons lol
Dreary said:
Thank you! It's working great now.
Now if we could only get rid of the on screen buttons lol
Click to expand...
Click to collapse
That's the thing..
Still stuck. I will try to decopile the apk againt today.
I will let you know if i get a Step further..
Help installing xposed
bdithug said:
Step 6 and 7 are wrong. Don't disable super user with supersu. Also, you need xposed installed as well, using rootcloak (the xposed module rather than official app from play store) to hide both remoteplay and supersu.
-I see two flavors. One is an apk (XposedInstaller_3.0_alpha4.apk) the other is a zip. Which one do I need, or both? If both in what order do I install them?
-I'm running Marshmallow, so do I need sdk23?
-What architecture do I need (x86, arm, arm64). The HTC One M8 has the Snapdragon 801.
Thanks a lot!
Click to expand...
Click to collapse
dpechiu said:
bdithug said:
Step 6 and 7 are wrong. Don't disable super user with supersu. Also, you need xposed installed as well, using rootcloak (the xposed module rather than official app from play store) to hide both remoteplay and supersu.
-I see two flavors. One is an apk (XposedInstaller_3.0_alpha4.apk) the other is a zip. Which one do I need, or both? If both in what order do I install them?
-I'm running Marshmallow, so do I need sdk23?
-What architecture do I need (x86, arm, arm64). The HTC One M8 has the Snapdragon 801.
Thanks a lot!
Click to expand...
Click to collapse
Hey Please read this Thread for Xposed Framework & Installation of it.
http://forum.xda-developers.com/showthread.php?t=3034811
I always had custom ROMs installed with Xposed preinstalled. So i can't help you without reading myself. Sorry.
Click to expand...
Click to collapse
SUCCESS!!!
Pictures loading
Sorry for bad quality. But to excited after 3 Days of work! [emoji7]
Gesendet von meinem SM-G935F mit Tapatalk
eric9401 said:
SUCCESS!!!
Pictures loading
Sorry for bad quality. But to excited after 3 Days of work! [emoji7]
Gesendet von meinem SM-G935F mit Tapatalk
Click to expand...
Click to collapse
God job bro!!!! you think he will be an application that will run without root
Wysłane z mojego SM-G935F przy użyciu Tapatalka
luukaszg said:
God job bro!!!! you think he will be an application that will run without root
Wysłane z mojego SM-G935F przy użyciu Tapatalka
Click to expand...
Click to collapse
I dont think so. Im not far enought into hacking/developing. Sorry. That will be the best i can do
Gesendet von meinem SM-G935F mit Tapatalk
Great job! Did u only find the R2 and Triangle so far? And are those transparent buttons included in the apk now or are you waiting to find the rest of the button pics?
Great work and thanks!
Blues-n-Blazin said:
Great job! Did u only find the R2 and Triangle so far? And are those transparent buttons included in the apk now or are you waiting to find the rest of the button pics?
Great work and thanks!
Click to expand...
Click to collapse
I edited the picture files.
Found more till now. Only tested with R2 and Triangle if the app starts. Transparent ist not in app. Have to edit every picture.
I think i get more till tomorrow.
Just need to find the time
Will update you
Gesendet von meinem SM-G935F mit Tapatalk
It's all good brother. We appreciate your effort. I will check back in a couple days and see how much further you have gotten. I am going to test it on my Shield Tablet when you get it fully transparent and will report back with the results so you can update your compatibility list if you want.
Thanks again!
I'm done.
Updated the first post.
Got everything transparent. Now in testing Phase. I will do the fine tuning & release this week.
Gesendet von meinem SM-G935F mit Tapatalk
eric9401 said:
I'm done.
Updated the first post.
Got everything transparent. Now in testing Phase. I will do the fine tuning & release this week.
Gesendet von meinem SM-G935F mit Tapatalk
Click to expand...
Click to collapse
Excellent news!! Good work man! Can't wait!
Related
Hello Galaxy Users,
I present you my first attempt to create a Xposed module for the powerful Xposed Framework by rovo89. This module allows you to multiwindow-enable apps that are otherwise not enabled by default by their respective developers. Unlike the unlimited hack, this module allows you to choose (enable/disable) only the apps you like with one exception - you can not disable the native multiwindow apps like gallery, solid explorer, etc. This works without patching apks or jars and it should work for all Galaxy phones/tablets that have multiwindow features like Note n7000, Note 2, Note 8, Note 10.1, SGS3, SGS4, etc. It enables multi-instance feature for Note N7000, Note 8 and SGS4 - multi-instance being the ability to launch same app more than once with some exceptions - not all apps can run in multiple instances like browsers, etc.
This module is on alpha stage so please give feedback to help me make it better.
How to INSTALL and USE?
1. Requires: rooted device (should work for both odex and deodex roms). Make sure you do not already have the unlimited apps hack or mod, otherwise this would have no effect at all.
2. Make a backup.
3. If you have not already, please install the Xposed Framework. You can find updated version HERE.
4. Download and install my Xposed Multiwindow Apps Manager module and be sure to check/enable it in the Xposed Installer module tab.
DOWNLOAD
5. RUN Xposed Multiwindow Apps Manager and choose the apps you want then reboot for changes to take effect.
6. A THANK YOU would be nice or maybe a cup of COFFEE to keep me awake in my MODDING NIGHTS.
NOTE1: Please do not repost this APP in other threads. I would appreciate it if you could just introduce and point a link to this thread to consolidate feedback.
NOTE2: To all ROM devs, you can include this in your ROMs with proper credit without need to ask my permission.
CREDITS: rovo89, tungstwenty, xda
sorry to say but I don't work for me on Energy Bean Rom
my steps
- installed apk
- set to on in modules
- reboot
- set a few apps to off
- reboot
but all apps are still there in MW
did I something wrong or maybe is it incompatible with EnergyBeanRom
oh, multi instance is working
sent from my G-Note
Hi Hara , May be this is like in his mod . The deselected ones wont disappear from the List they just wont start in window mode..May be
Gesendet von meinem GT-N7000 mit Tapatalk 2
thanks for reply,
but they start from MW, I just tested it for a minute
sent from my G-Note
As I said in the OP, if the ROM you are using already has the UNLIMITED MULTIWINDOW HACK or MOD integrated, then this module will have no effect. Just change the FlashBarService.apk and services.jar from the original stock rom.
oh thanks,
I didn't read well
sent from my G-Note
so, I have running it now for a while in parallel with the MWM. i could not find any issue, but my multi-instance is working now. it would not work at the floating MW (i dont no why, normaly it should be there). So, the MAM does his job :good:
hi, i need a module of xposed for denied sms to mms conversion, for xposed v2.14 framework and stock firmware LSZ 4.1.2 ITV - Samsung Galaxy Note GT-N7000; or any other app or module for this problem....
thank u
xxxfirenzexxx said:
hi, i need a module of xposed for denied sms to mms conversion, for xposed v2.14 framework and stock firmware LSZ 4.1.2 ITV - Samsung Galaxy Note GT-N7000; or any other app or module for this problem....
thank u
Click to expand...
Click to collapse
here
and
here
just search
I just tried this, but with v2.1.4 of xposed fram. isn't compatible; and i couldn't find the v2.0...
Inviato dal mio GT-N7000 con Tapatalk 2
xxxfirenzexxx said:
I just tried this, but with v2.1.4 of xposed fram. isn't compatible; and i couldn't find the v2.0...
Inviato dal mio GT-N7000 con Tapatalk 2
Click to expand...
Click to collapse
hmm, for me it is working on 2.1.4...
Thanks for this :good:
This works great!
thanks for this app, works great on MF8
Nice Work OP!! Thank you for this module!
I'm having an issue on my stock/rooted AT&T SGS4 - I used this to enable all of my apps, but when I try to drag one into the multi-window bar from the Edit screen, it doesn't add the app that I was try to add. It ends up adding some random app instead. Has anyone else seen this?
do you make this mod for ics 4.04 ?
im using mtk device many others too...thanks in advance
I hope it would have select all, unselect all and search apps functions in next version because it's really a pain to pick out just one or two apps among hundreds.
Thanks
---------- Post added at 02:29 AM ---------- Previous post was at 01:34 AM ----------
And could you make options to disable multi-intances and not to select new installed app ?
Hi
is it only for Sam roms n TW customs? Or does it work on paranoids and cm roms?
lmarr28 said:
I'm having an issue on my stock/rooted AT&T SGS4 - I used this to enable all of my apps, but when I try to drag one into the multi-window bar from the Edit screen, it doesn't add the app that I was try to add. It ends up adding some random app instead. Has anyone else seen this?
Click to expand...
Click to collapse
I am having the same problem, when you swipe down to pick app it will pull out the app from the first screen only, when you pick app from the first screen it still works. I think it's a bug in determining the position of apps.
The Barclays mobile banking app was working on rooted phones until the last update, there is a few work around but the easiest way is to install the last update & unclick auto update in Google play. This is for anyone who has already made the mistake & updated already I can help.
Please don't mirror the download, if you wanna include this in your post just include the link to my post, thanks.
1. Uninstall your app.
2. Download the last working update below.
3. Open & update via a file manager (something like root explorer)
4. & the most important thing.... thank me on this post (Optional) :thumbup:
5. (Optional) Give the bank app a email or comment on Google play so we might get future updates for Rooted users like I did!
Barclays banking app version 1.3.3
Download link-
http://www.mediafire.com/?6fc51lu9xed4d6x
Enjoy & click thanks or like if this helps
Also there is another method available here by another xda member, the link for his page is here if you would rather use his way go here-
http://forum.xda-developers.com/showthread.php?p=43495297
sent from Tapatalk2 via my Supermodded S3 using UltimaRom v13 & running Boeffla v2.12 beta7 kernel
you haven't even mentioned how to make the 1.3.3 version work as it still requires the guide i wrote on the other thread.
http://forum.xda-developers.com/showpost.php?p=42346990&postcount=186
Don't forget to thank this guy " http://forum.xda-developers.com/showpost.php?p=43287742&postcount=213 " for being the first to post the 1.3.3 APK
[EDIT - Nevermind]
fma965 said:
you haven't even mentioned how to make the 1.3.3 version work as it still requires the guide i wrote on the other thread.
http://forum.xda-developers.com/showpost.php?p=42346990&postcount=186
EDIT: [sarcasm]Yeah thank him for re-uploading a file some 1 else already posted in the other thread and not even posting how to make the 1.3.3 app work as it still needs to be "installed" correctly.[/sarcasm]
So what if i backup my own version and upload it here, is that mirroring, Lol what a stupid thing to say. It's not like it's your app.
EDIT 2: Don't forget to thank this guy " http://forum.xda-developers.com/showpost.php?p=43287742&postcount=213 " for being the first to post the 1.3.3 APK
Not trying to be *****y but this guy doesn't deserve credits for just uploading a APK which was posted 2 pages back in the above thread and he clearly knew about that thread as has posted in it, The guy i linked above who uploaded it first deserves thanks and so do i for putting the small guide together and so do the people who i gathered the information from.
Click to expand...
Click to collapse
He does deserve credit & if anyone wants to use his way they can go there, I'm just helping out like we do here on Xda forums, I had the same problem after updating & used my own solution which I provided in post 1, uploaded your own apk isn't mirroring, all my info was my own also my apk. You don't need the guide to make this work like you did, you just unclick auto install & use the 1.3.3 version like I did, I reinstalled mine from titanium after I found the new update unusable on my rooted device.
sent from Tapatalk2 via my Supermodded S3 using UltimaRom v13 & running Boeffla v2.12 beta7 kernel
Your method will only work if they already had the data for the app, but yet there is no mention of this, Fresh install will require the above guide and considering there is no mention of "having to have it installed before" or "how to fix barclays mobile banking app" then it implies that this will make it work on rooted phones just by downloading your APK when this is simply not the case.
Also i know uploading my own apk isn't mirroring however technically it is as the CRC would be identical on both APK's and it seems kinda stupid saying don't mirror but yet they can easily upload the same APK and you wouldn't know.
Changed step 4 to optional due to the comments lol.
sent from Tapatalk2 via my Supermodded S3 using UltimaRom v13 & running Boeffla v2.12 beta7 kernel
deanr1977 said:
Changed step 4 to optional due to the comments lol.
sent from Tapatalk2 via my Supermodded S3 using UltimaRom v13 & running Boeffla v2.12 beta7 kernel
Click to expand...
Click to collapse
LOL, Well now that is sorted we are all good
fma965 said:
you haven't even mentioned how to make the 1.3.3 version work as it still requires the guide i wrote on the other thread.
http://forum.xda-developers.com/showpost.php?p=42346990&postcount=186
Don't forget to thank this guy " http://forum.xda-developers.com/showpost.php?p=43287742&postcount=213 " for being the first to post the 1.3.3 APK
[EDIT - Nevermind]
Click to expand...
Click to collapse
/Nevermind
Sent from ThePureHeart's I9300 Boss Edition
good work
==========good work==========
Thanks for this ive installed it but cant seem to find it with ES?
Any suggestions?
Thanks
Iceax123 said:
Thanks for this ive installed it but cant seem to find it with ES?
Any suggestions?
Thanks
Click to expand...
Click to collapse
You can't find the app or the apk? If you can't find the app try a reboot? Or do you mean you can't find the apk? It should be in your downloads folder?
sent from Tapatalk2 via my Supermodded S3 using UltimaRom v13 & running Boeffla v2.12 beta7 kernel
deanr1977 said:
You can't find the app or the apk? If you can't find the app try a reboot? Or do you mean you can't find the apk? It should be in your downloads folder?
sent from Tapatalk2 via my Supermodded S3 using UltimaRom v13 & running Boeffla v2.12 beta7 kernel
Click to expand...
Click to collapse
Thanks it was the app i was struggling to find after installing it, as it happens i tried the other method and im now up and running.
Thanks
Andy
I cant get the Barclays mobile app to work on my rooted experia z does anyone know if this method still works?
I tryed to install this old version of apk but it doesnt work on rooted phone
@ x7nofate did you try this way which I wrote under here? Or may be if you clear the cache of the app? It will work?
@ xjacko the app still works on my rooted s3
Try install from the market, then open it up, it will say not supported on rooted phones or something like that, then Uninstall it, then download my link & copy it over to your phone, now find it via a file manager app (root explorer, es manager or something like that), install it (or push it to data/app via manager app & then reboot the phone) & then enjoy barclays bank app on a rooted phone, it's the version before so tick don't auto install from the play store or it will update next time you use wifi or mobile data. Or you can also use method 2 in this post by another xda member? Hope this helps you :thumbup:
sent from Tapatalk2 via my Supermodded S3 using UltimaRom v13 & running Boeffla v2.12 beta7 kernel
it doesnt work for me I tryed other method and still the some I can;t install it
x7nofate said:
it doesnt work for me I tryed other method and still the some I can;t install it
Click to expand...
Click to collapse
That's strange? Working fine here
sent from Tapatalk2 via my Supermodded S3 using UltimaRom v13 & running Boeffla v2.12 beta7 kernel
deanr1977 said:
That's strange? Working fine here
sent from Tapatalk2 via my Supermodded S3 using UltimaRom v13 & running Boeffla v2.12 beta7 kernel
Click to expand...
Click to collapse
Please help, I installed the Barclay's app 2 days ago and today I uninstalled it and copied your modified apk to data/app but after copying and restarting my phone the play store auto updated the app.
Now I have barclays-1 and barclays-2 apk in data/app . I've tried deleting my cache and dalvik cache and installing then reuninstalling the official app
I then tried installing the modified apk and restarting but the app won't appear in all apps, please help :/
Sent from my Nexus 4 using Tapatalk 4
woohoowoohoo!
Months ago I lost use of mobile banking on my rooted SG Note2, I only had Titanium Backup set to keep one old version, and foolishly ran a backup having auto-updated a bunch of apps and then realised the new version of BMB reported device was rooted.
I tried all sorts of things to get it to work.. I came across many guides suggesting what to do.. and none worked..
* I used the triangleaway fix to make device normal.
* I disabled adb.
* I disabled installation of non-market apps
* I tried hide root programs.
* I renamed the Superuser.apk app to something else
* I renamed /system/xbin/su to something else
* I ensured /system was read only.
* I scanned system and removed any files or apps which had the name "root" or "su" in them and thus might look like root.
I even got to the point where if it weren't for having an active root shell via adb I'd have lost root!.
but nothing worked.
Then I came across this thread. I removed the app installed from Google Play, downloaded the 1.3.3 apk from the link provided, and installed it.
Ironically downloading the banking app from a third party is perhaps the most dangerous thing you could do, and yet Barclays force you in to it!
At some point I imagine they will put something in the internet servers which will deliberately break 1.3.3 and force an upgrade
But in the meanwhile I am very very happy! I will no longer have to carry my PIN Sentry box around with me.
xjacko said:
I cant get the Barclays mobile app to work on my rooted experia z does anyone know if this method still works?
Click to expand...
Click to collapse
I now have a rooted Xperia Z Ultra, and I have done everything to make this work yet it still says device is rooted. I restored the app from my Note 2 which is rooted and where the app works; so there must be something unusual that the Xperia flags up to tell Barclay's app its rooted.
If you have any ideas, please shout out so I can try them out. I did all the things I previously posted when I was trying to get the newer app to work.
What kind of fool would access their bank account from a hacked program hosted on mediafire uploaded by an unknown person who cannot even say what it is they have done to make it work?
Rofl.
From the original development and port from @gruesomewolf, Here's an original port "ported" to the Galaxy Tab3.
http://forum.xda-developers.com/show....php?t=2186621
^THE ORIGINAL GALAXY S3 MULTIWINDOW THREAD WHERE THE ZIP POSTED ABOVE ORIGINATED
"http://forum.xda-developers.com/showpost.php?p=48162713&postcount=4"
I found that the multi-pane or multi-task wasnt included in the 7.0 version of the Galaxy Tab 3 and got really frustrated. After unlocking my Tab with root/TWRP/xposed framework and finally putting together a decent setup and performance, i pushed in my final touch. I found today that there is already a flash able zip for the Galaxy S3 older firmware and found it works just as well so we will use this untill I/we change the dpi for a 7.0 screen.
Still needs some dpi adjustments but none the less works well, except for the rare crashes and multi-window not working.
My port was based off of the 8.0 firmware and crashed more frequently than this zip.
DOWNLOAD: https://www.dropbox.com/s/1y4nluibgrnhy14/MultiView_Universal.zip
(Someone mirror)
Requirements
:Most recent Tab3 7.0 firmware (4.1.2)
:TWRP or Custom Recovery
Instructions
:Flash zip into your rom (easy) or push via adb if your experienced
:Wipe Cache
:Reboot
Bugs
:Multi-Window does not work but the Multi-Task does work (This could be because of the firmware capadibility or screen dpi size)
:Crashs or FCs when memory is filled
Screens below from my tab
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Heres's where I found the original link http://gs3.wonderhowto.com/how-to/i...alaxy-s3-run-multiple-apps-same-time-0144520/
Sent from my SM-T210R using Tapatalk
Yes please!!! :d ; :d :d :d :d
Oh please just got mine abd can't believe that this isn't already part of the Rom. Soo frustrating
Sent From My Smokey SG3
credit to original dev & questions
Nx Biotic said:
Still needs some dpi adjustments but none the less works well, except for the rare crashes and multi-window not working.
I found that the multi-pane or multi-task wasnt included in the 7.0 version of the Galaxy Tab 3 and got really frustrated. After unlocking my Tab with root/TWRP/xposed framework and finally putting together a decent setup and performance, i pushed in my final touch. I found today that there is already a flash able zip for the Galaxy S3 older firmware and found it works just as well so we will use this untill I/we change the dpi for a 7.0 screen.
I dont know who the original author is but thankyou and if your name is found, you will be mentioned.
Stock firmware modders should include this in their roms to improve tablet experience and focus on improving it for us. (Im busy with my own projects =3 but feel free to PM)
Click to expand...
Click to collapse
first things first....i'm not sure if u know who i am but i have personally ported the multiwindow mod to several other devices (also i have already been working on a tab 3 version...will provide the link below). Although i did NOT create this particular mod I DO know who did (will provide link to original thread below as well...i also will include the original mirror) and while this is an awesome find this zip is EXACTLY the same as the original so lets make sure they get proper credit in the OP because we wouldnt want the thread getting closed. With that said i would like to say thanks for this great discovery since u have basically found the proper "branch" of multiwindow that works with the 7 inch version. My main question is when u mention "multi-window not working" do u mean that the actual split screen function is not working? If so then this will be a major disappointment for most users expecting to come here and download an actual functioning flashable mod...if it does in fact already work as it is supposed to then could u please provide a few screenshots of the mod in action (DUAL/SPLIT SCREEN) Also...can i get a full list of bugs/glitches that u have encountered? Using these files as a base i should be able to complete the mod for u guys (if it isnt working yet) within the next day or so if everything goes well...if the short flashbar is the only problem then it can be fixed by setting the dpi of the flashbarservice.apk to 320 in the app settings xposed module
http://forum.xda-developers.com/showthread.php?t=2186621
^THE ORIGINAL GALAXY S3 MULTIWINDOW THREAD WHERE THE ZIP POSTED ABOVE ORIGINATED
the package was put togethor by the user @gruesomewolf of team nocturnal (so please give credit to him if this is already working) who is the op of this thread but the files were actually modded/ported by team synergy who would receive the majority credit i suppose
http://forum.xda-developers.com/showthread.php?t=2432918
^THE ORIGINAL TAB 3 MULTIWINDOW THREAD (been working on both 7 & 10 inch but still not complete)
http://www.androidfilehost.com/?fid=9390355257214631995
^THIS IS THE ORIGINAL MIRROR OF THE MULTIWINDOW ZIP
on a sidenote...so we dont cause confusion i suggest that we use the official term that samsung uses which is "multi window" (it is often called multiview & other things) so it will help other users find accurate information on the mod. if it is not too much trouble u might want to change the title of the thread so that it comes up properly in a forum search...thx in advance
mirror: http://www.androidfilehost.com/?fid=23252070760973186
---------- Post added at 05:25 PM ---------- Previous post was at 05:19 PM ----------
BTW i tried the zip file from you wich i just mirror'd but it doesn't boot on the T210
safariking said:
mirror: http://www.androidfilehost.com/?fid=23252070760973186
---------- Post added at 05:25 PM ---------- Previous post was at 05:19 PM ----------
BTW i tried the zip file from you wich i just mirror'd but it doesn't boot on the T210
Click to expand...
Click to collapse
ThIs doesn't seem to boot for me as well on the SM-T210R
Sent From My Smokey SG3
is there a working mutiwindow on SM-T210R?
is there a working mutiwindow on SM-T210R?
defleshed2 said:
is there a working mutiwindow on SM-T210R?
Click to expand...
Click to collapse
Not yet, been searching myself haven't found one yet
Sent From My Smokey SG3
THEDEVIOUS1 said:
first things first....i'm not sure if u know who i am but i'm the dev that has ported the multiwindow mod to several other devices (also i have already been working on a tab 3 version...will provide the link below). Although i did NOT create this particular mod I DO know who did (will provide link to original thread below as well...i also will include the original mirror) and while this is an awesome find this zip is EXACTLY the same as the original so lets make sure they get proper credit in the OP because we wouldnt want the thread getting closed. With that said i would like to say thanks for this great discovery since u have basically found the proper "branch" of multiwindow that works with the 7 inch version. My main question is when u mention "multi-window not working" do u mean that the actual split screen function is not working? If so then this will be a major disappointment for most users expecting to come here and download an actual functioning flashable mod...if it does in fact already work as it is supposed to then could u please provide a few screenshots of the mod in action (DUAL/SPLIT SCREEN) Also...can i get a full list of bugs/glitches that u have encountered? Using these files as a base i should be able to complete the mod for u guys (if it isnt working yet) within the next day or so if everything goes well...if the short flashbar is the only problem then it can be fixed by setting the dpi of the flashbarservice.apk to 320 in the app settings xposed module
http://forum.xda-developers.com/showthread.php?t=2186621
^THE ORIGINAL GALAXY S3 MULTIWINDOW THREAD WHERE THE ZIP POSTED ABOVE ORIGINATED
the package was put togethor by the user @gruesomewolf of team nocturnal (so please give credit to him if this is already working) who is the op of this thread but the files were actually modded/ported by team synergy who would receive the majority credit i suppose
http://forum.xda-developers.com/showthread.php?t=2432918
^THE ORIGINAL TAB 3 MULTIWINDOW THREAD (been working on both 7 & 10 inch but still not complete)
http://www.androidfilehost.com/?fid=9390355257214631995
^THIS IS THE ORIGINAL MIRROR OF THE MULTIWINDOW ZIP
on a sidenote...so we dont cause confusion i suggest that we use the official term that samsung uses which is "multi window" (it is often called multiview & other things) so it will help other users find accurate information on the mod. if it is not too much trouble u might want to change the title of the thread so that it comes up properly in a forum search...thx in advance
Click to expand...
Click to collapse
Thanks for the heads up
screens
Sent from my SM-T210R using Tapatalk
Wait are you telling me you flash a S3's framework.jar, service.jar, android.policy.jar- on a SM-T210 device?
Sent from my SM-T210 using xda app-developers app
bensonhsu2008 said:
Wait are you telling me you flash a S3's framework.jar, service.jar, android.policy.jar- on a SM-T210 device?
Sent from my SM-T210 using xda app-developers app
Click to expand...
Click to collapse
actually thats not a problem...i ported multiwindow to several devices the first being the galaxy tab plus/p6200 and what i had to basically do is flash note 8 files to get it to work. THIS is the problem....no one else has confirm that their tab will even boot after flashing this zip not to mention that the multiwindow feature does not even work.
@Nx Biotic
i'm curious....EXACTLY what do u mean when u say "multi task" is working? By that are u talking about the flashbar/launcher on the left side of the screen? Also...no one else can confirm that this even boots so did u flash or manually load it on your system?
Thanks man. It is really working. Here is some screenshot. Gotta test more. No problem so far except the one you said. Dpi issues
Sent from my SM-T210R using xda app-developers app
just flashed it seems to work got that little panel on the side of the screen good work now to get that dual window working im using the sm 211
THEDEVIOUS1 said:
actually thats not a problem...i ported multiwindow to several devices the first being the galaxy tab plus/p6200 and what i had to basically do is flash note 8 files to get it to work. THIS is the problem....no one else has confirm that their tab will even boot after flashing this zip not to mention that the multiwindow feature does not even work.
@Nx Biotic
i'm curious....EXACTLY what do u mean when u say "multi task" is working? By that are u talking about the flashbar/launcher on the left side of the screen? Also...no one else can confirm that this even boots so did u flash or manually load it on your system?
Click to expand...
Click to collapse
Multi-Task meaning you can click on and launcher icon and itl launch quickly kinda like androids multi task
Sent from my SM-T210R using Tapatalk
I have no idea how you guys got it to work everytime i flash it i am in a bootloop even with wiping cache/dalvik cache also manualy pushing the files to /system doesn't work
Using a SM-T210
Sent from my GT-I9105P using xda app-developers app
safariking said:
I have no idea how you guys got it to work everytime i flash it i am in a bootloop even with wiping cache/dalvik cache also manualy pushing the files to /system doesn't work
Using a SM-T210
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
Same with me on sm-t210r
Sent from my SM-T210R using Tapatalk 4
Are you guys using stock ROM?
Sent from my SM-T211 using Tapatalk
Multiwindow test 5...please test and report
trazfer said:
Thanks man. It is really working. Here is some screenshot. Gotta test more. No problem so far except the one you said. Dpi issues
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
jetboss said:
just flashed it seems to work got that little panel on the side of the screen good work now to get that dual window working im using the sm 211
Click to expand...
Click to collapse
lahegry said:
ThIs doesn't seem to boot for me as well on the SM-T210R
Sent From My Smokey SG3
Click to expand...
Click to collapse
defleshed2 said:
is there a working mutiwindow on SM-T210R?
Click to expand...
Click to collapse
Ok guys...we should be able to get this thing working with a few more tests zips. As of right now i have 3 ideas starting with a continuation of the original tab 3 multiwindow thread we"ve been working in...i will link to one attempt below and will be back with test 6 in about an hour. Test 7 will take a lil longer since will have to go through the code line by line...hopefully it wont even be necessary
INSTALL INSTRUCTIONS
1. Install "samsung multiwindow manager (note 10.1)" from the play store (do NOT patch anything when i asked...this step is not mandatory but u will want to use this to enable some more apps since the default ones may not work)
2. Edit your build prop by adding the line qemu.hw.mainkeys=0 to the bottom of the file, save then reboot into recovery
3. Flash the Test 5 zip below
4. You should now notice navigation buttons at the bottom...press the up arrow/miniapps tray and try some of the apps (please be aware that the stock samsung apps may force close and will need to be replaced...also launching from the flashbar/left launcher will still probably not work)
5. If u experience a force close when pressing the home/back buttons then you can remove the build prop edit and wait for Test 6 which will focus on fixing the flashbar
https://drive.google.com/file/d/0B7yxeu9x48ILblBiZ0hCYVFlZDg/edit?usp=sharing
^T21x MULTIWINOW TEST 5
jetboss said:
Are you guys using stock ROM?
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
Stock deodexed sm-t210r
Sent From My Smokey SG3
To get milk music working on rooted, not samsung (and older samsung) devices.
Step 1: Back Up Your Build.prop
Just make a copy somewhere on your sd card, also make a backup of your os.
Step 2: Tweak Your Device Brand & Model.
Now go back to the /system directory, but this time tap on build.prop, don't long-press. Choose RB Text Editor to edit the file, then look for the model, brand, and manufacturer lines (highlighted below). Your original ones will show:
Note:as there are so many devices the <text> areas below will instead be specific to your device but the rest should be the same.
ro.product.model=<model>
ro.product.brand=<brand>
ro.product.manufacturer=<manufacturer>
Simply change them to match a (newer) Samsung device. I used a Galaxy S4.
ro.product.model=Galaxy S4
ro.product.brand=Samsung
ro.product.manufacturer=Samsung
Step 3: Save the build.prop
Step 4: Sideload the apk, because the play store still wont let you download it. So I am hosting an apk copy in my dropbox for ya'll.
https://www.dropbox.com/s/a16vvbhu4h6gvg7/com.samsung.mdl.radio-1.0.176956 (1).apk
Milk Music will now work with most of the functionality that it would on a native Samsung device, except that you won't be able to log into a Samsung account for syncing stations or enable explicit content from the settings.
Please post if this is working or not working for you. Include your device name, android version, and rom version.
Please let me/us know of any tweaks to this process you had to preform in order to get this working.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
prepaidguy9081 said:
To get milk music working on rooted, not samsung (and older samsung) devices.
Step 1: Back Up Your Build.prop
Just make a copy somewhere on your sd card, also make a backup of your os.
Step 2: Tweak Your Device Brand & Model.
Now go back to the /system directory, but this time tap on build.prop, don't long-press. Choose RB Text Editor to edit the file, then look for the model, brand, and manufacturer lines (highlighted below). Your original ones will show:
Note:as there are so many devices the <text> areas below will instead be specific to your device but the rest should be the same.
ro.product.model=<model>
ro.product.brand=<brand>
ro.product.manufacturer=<manufacturer>
Simply change them to match a (newer) Samsung device. I used a Galaxy S4.
ro.product.model=Galaxy S4
ro.product.brand=Samsung
ro.product.manufacturer=Samsung
Step 3: Save the build.prop
Step 4: Sideload the apk, because the play store still wont let you download it. So I am hosting an apk copy in my dropbox for ya'll.
https://www.dropbox.com/s/a16vvbhu4h6gvg7/com.samsung.mdl.radio-1.0.176956 (1).apk
Milk Music will now work with most of the functionality that it would on a native Samsung device, except that you won't be able to log into a Samsung account for syncing stations or enable explicit content from the settings.
Please post if this is working or not working for you. Include your device name, android version, and rom version.
Please let me/us know of any tweaks to this process you had to preform in order to get this working.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
Can I change back build.prop after install, or do I have to leave it for Milk to work?
Doesnt work outside US
Enviado desde mi GT-I9505 mediante Tapatalk
chape199 said:
Doesnt work outside US
Enviado desde mi GT-I9505 mediante Tapatalk
Click to expand...
Click to collapse
OK if you are rooted easy work around if you are outside the US .. use titanium back up freeze.... 1 1.Samsung Account
2. Use a US VPN
Problem solved it will run perfect I'm using it in Australia ... good luck
Sent from my GT-I9505 Low Flying on Abyss Kernal.. using XDA Premium 4 mobile app
Jesellers88 said:
Can I change back build.prop after install, or do I have to leave it for Milk to work?
Click to expand...
Click to collapse
you have to leave it for it to work... it is for that reason i am searching for a modded apk that bypasses that check so it'll work on any device w/o modding...
the1dynasty said:
you have to leave it for it to work... it is for that reason i am searching for a modded apk that bypasses that check so it'll work on any device w/o modding...
Click to expand...
Click to collapse
I don't know much about it, but it sounds like something an Xposed Mod might be able to address.
Well what do you know - there's a new module in xposed that can make it work. Looks like it was just added.
Sent from my Nexus 5 using Tapatalk
Jesellers88 said:
Well what do you know - there's a new module in xposed that can make it work. Looks like it was just added.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
cool but useless for me running ART... if anyone finds a modded apk that works on any device i'd like to install it on a tablet at work so i have music to listen to... pandora gets boring after a while... lol
the1dynasty said:
cool but useless for me running ART... if anyone finds a modded apk that works on any device i'd like to install it on a tablet at work so i have music to listen to... pandora gets boring after a while... lol
Click to expand...
Click to collapse
I used to run ART but eventually I went back because of xposed. After a while, I really just forgot the difference. Hopefully a modded apk will show up though.
Sent from my Nexus 5 using Tapatalk
Jesellers88 said:
I used to run ART but eventually I went back because of xposed. After a while, I really just forgot the difference. Hopefully a modded apk will show up though.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
i used ART for the first month of owning my N5... then i switched to dalvik for some of goodies that xposed offers... tried out a few and ultimately preferred stability over features and i basically removed all xposed and just left it with dalvik for a bit... I noticed lags and stutters here and there and eventually switched back to ART and I can honestly say that ART is MUCH smoother and stable than running any other mode... i've tested this extensively with various settings and setups (always stock ROM with stock kernel or Franco) and nothing is as smooth as using ART... so i'm not going back for even one feature using xposed... just my experience
I have a galaxy s3. I am using slimkat ROM. Is there a way for me to install and run Milk without having to change build prop?
peach007 said:
I have a galaxy s3. I am using slimkat ROM. Is there a way for me to install and run Milk without having to change build prop?
Click to expand...
Click to collapse
Xposed mod chocolate milk module
Sent from my Nexus 5 using XDA Premium 4 mobile app
---------- Post added at 12:19 AM ---------- Previous post was at 12:16 AM ----------
Can anyone share latest apk
Sent from my Nexus 5 using XDA Premium 4 mobile app
peach007 said:
I have a galaxy s3. I am using slimkat ROM. Is there a way for me to install and run Milk without having to change build prop?
Click to expand...
Click to collapse
I also have a S3 running slimkat. I didn't bother editing the build.prop and just installed the apk. Works fine. Not being able to log in sucks though because I need my explicit fix!
It is possible to install the Samsung account app on non touchwiz firmware. I have managed to sideload it into CM11 and a GPe ROM on my S4.
Here's the .apk that I have saved on my SD card for when I flash new firmware:
https://www.dropbox.com/s/qptszssdcl52i5n/Samsungservice.apk
Install it like any other app. Then in settings>accounts, add a new account and select Samsung. The app will ask to update, then you can create an account or login to an existing one. Milk Music will automatically see the account and then you can enable explicit lyrics in the app.
The only problem I have with Milk Music is that I can't update it. Samsung changed the way it determines device compatibility and "broke" the app for custom firmwares. I had to sideload it and just have to search for the .apk whenever the app gets updated since it won't update via google play store.
---------- Post added at 09:41 PM ---------- Previous post was at 09:25 PM ----------
HeavyA said:
It is possible to install the Samsung account app on non touchwiz firmware. I have managed to sideload it into CM11 and a GPe ROM on my S4.
Here's the .apk that I have saved on my SD card for when I flash new firmware:
https://www.dropbox.com/s/qptszssdcl52i5n/Samsungservice.apk
Install it like any other app. Then in settings>accounts, add a new account and select Samsung. The app will ask to update, then you can create an account or login to an existing one. Milk Music will automatically see the account and then you can enable explicit lyrics in the app.
The only problem I have with Milk Music is that I can't update it. Samsung changed the way it determines device compatibility and "broke" the app for custom firmwares. I had to sideload it and just have to search for the .apk whenever the app gets updated since it won't update via google play store.
Click to expand...
Click to collapse
Milk music .apk for the latest version:
https://www.dropbox.com/s/2or3dxxpf8zmtxu/Milk_Music_ 1.1.179361.apk
Sent from my GT-I9505G using Tapatalk
Update from 6/18
https://www.dropbox.com/s/elorpugy3sml5p8/Milk_Music_ 1.1.180022.apk
Sent from my GT-I9505G using Tapatalk
Update from 7/1
https://www.dropbox.com/s/rdnq91gxabijglu/Milk_Music_ 1.1.183563.apk
Sent from my GT-I9505G using Tapatalk
HeavyA said:
Update from 7/1
https://www.dropbox.com/s/rdnq91gxabijglu/Milk_Music_ 1.1.183563.apk
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
I keep getting the "App not installed" error when trying to install the updated version , any ideas? The original version installed fine, I just can't update it with the latest.
Sorry, I don't have any idea what would cause that. I use the apk downloader to pull the file from Google play since my phone (t mobile S4 running the GPE firmware) comes up as incompatible when I try to go to the app directly the play store. This apk installed just fine for me. Try uninstalling the existing app and then install the 7/1 file.
Sent from my GT-I9505G using Tapatalk
HeavyA said:
Sorry, I don't have any idea what would cause that. I use the apk downloader to pull the file from Google play since my phone (t mobile S4 running the GPE firmware) comes up as incompatible when I try to go to the app directly the play store. This apk installed just fine for me. Try uninstalling the existing app and then install the 7/1 file.
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
I am seeing the same app not installed error let me know if I can help troubleshoot or get any info to you guys.
Thank you !
I don't have any involvement outside of providing the apks. I deleted the old files and left only the Samsung account apk and the latest milk music apk.
All I can suggest is deleting the old app, rebooting to recovery and clearing cache and dalvik and trying to reinstall. Maybe re-download the apk also. (Try apkdownloader or apkleecher to pull the actual file from Google play - that's how I managed to get it). Other than that, I can't provide any answers
Sent from my GT-I9505G using Tapatalk
---------- Post added at 09:16 AM ---------- Previous post was at 09:12 AM ----------
Out of curiosity, what phone/firmware are you guys using?
Sent from my GT-I9505G using Tapatalk
AOSP Browser for 4.4.2 Kit Kat No Root is required
READ ME FIRST
First let me say, I have searched around and did not seem to find a working AOSP browser for Android Kit Kat, luckily someone posted some apks from One Plus One. So please read:
Credits go to blackhand1001 who started the original thread, but then his files no longer work for most of us i believe.
Credits go to the CM team for the One Plus One/files and M4rt1n94 for uploading the browser apk in his original thread.
FLASH PLAYER DOES NOT WORK, i have tried the files provided by adobe from here. If someone can some how tweak the latest Flash Player 11.1 for Android 4.0 (11.1.115.81) to collaborate with the browser then that would be great.
BOOK MARKS SYNC from @blackhand1001 DOES NOT WORK either. I hope someone or him can provide a working one, please
I have tested this on Stock Sony Xperia Z 4.4.2 and Xperia Z2 Tablet 4.4.2. It may or may not work for you, but it should work for all Kit Kats. Wish you best of luck. I do not know does it work for FW below Kit Kat, you tell me, if it does not work then try the original files from blackhand1001.
INSTALLATION
Same method provided by blackhand1001 from his original thread.
Download the "signedbrowser.apk" file that I have modified from below and place it in your phone's internal or external storage.
Go to general settings / security / check unknown sources
Use es file manager or root explorer (the non root version) from the play store and navigate to system / apps / and install Browser ProviderProxy.apk NOTE: it will state installation failed (that is normal)
Reboot your device manually
Navigate to the downloaded file you have done in step 1 and install the "signedbrowser.apk"
Uncheck unknown sources from your settings / security
DONE
Please hit the thanks button below and all the people I have mentioned up there.
If we already have 4.4, wouldn't we already have this?
Never mind, I found the answer. They have discontinued the old native browser.
Didn't work on M8 Verizon, but Browser proxy installed
Hey guys, is there are any ways to fix black screen issue
off topic but what is your theme? Really nice ! also your app for the floating sofkeys
I don't have Browser ProviderProxy.apk in any directory on my phone, so I just downloaded and installed browser apk and it works. Xperia M CM11.
Didn't work for me on an Xperia Z1 (C6903, stock 4.4.2) - probably because com.android.browser is actually the Browser Small App, and so is signed differently. Worked on my Optimus 2X (P990, unofficial CM11) though.
I think I can uninstall the small app, but I do like it so. Your mileage may vary
Didn't work on Moto G.
The problem is android WebKit where google has squeezed it and removed some commits from it in order to force people use their new default android web browser, chrome!..so whatever browser depends on that engine in kitkat it will lack a lot of feature like uploading any file to the web!
that's why Firefox and Chrome depend on their native web engines instead of relying on the unsupported webkit.
Finally! An AOSP browser which can open tabs using the pie on KK! Thank you!
Sent from my Nexus 4 using XDA Premium 4 mobile app
Samsung Galaxy NotePro 12.2 LTE (SM-P905)
I got BrowserProviderProxy.apk located at system/app - not system/apps (this don't even exist), and it installs normally, doesn't give any error.
Then reboot and trying to install signedBrowser.apk --> "Installing App --> App not installed"
So no go for that device :/
Spere said:
Samsung Galaxy NotePro 12.2 LTE (SM-P905)
I got BrowserProviderProxy.apk located at system/app - not system/apps (this don't even exist), and it installs normally, doesn't give any error.
Then reboot and trying to install signedBrowser.apk --> "Installing App --> App not installed"
So no go for that device :/
Click to expand...
Click to collapse
Same thing happens with my Verizon Galaxy S4 (SCH-I545)
There's an upgraded version of the 4.0 ICS browser in the app store called ics browser plus.
Sent from my LG Motion 4G using Tapatalk.
BrowserProxyProvider.apk installs but after rebooting the signedbrowser.apk will not install on VZW Note 3.
airmaxx23 said:
BrowserProxyProvider.apk installs but after rebooting the signedbrowser.apk will not install on VZW Note 3.
Click to expand...
Click to collapse
Must be a Samsung thing. Same exact thing happens to other Samsung devices to.
Proxy app works signed browser not installed on nexus 5 just swell try again
Is it the aosp browser from 4.4 sources? Because that one sucks, it's based on chrome, not webkit.
airmaxx23 said:
BrowserProxyProvider.apk installs but after rebooting the signedbrowser.apk will not install on VZW Note 3.
Click to expand...
Click to collapse
The same thing on Moto G
crinoz said:
The same thing on Moto G
Click to expand...
Click to collapse
same here on the N4 [emoji53]
sent from my diabetic Nexus 4 (too much KitKats).
crinoz said:
The same thing on Moto G
Click to expand...
Click to collapse
C4SCA said:
same here on the N4 [emoji53]
sent from my diabetic Nexus 4 (too much KitKats).
Click to expand...
Click to collapse
Guys try unchecking the unknown resources then install the browserproxy apk then reboot then check unknown resources and then install the browser apk.
Sent from my C6603 using XDA Premium 4 mobile app