Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This guide is for:
SuperPad / Flytouch2 / WWE10 Tablets
Make sure you've got the right device.
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 256MB RAM
- It has 2GB Internal Storage
- Android OS 2.1
- Have 2 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X210 Processor
This ROM is NOT for you if your device is SuperPad 2 / Flytouch 3
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 512MB RAM
- It has 4GB Internal Storage
- Android OS 2.2
- Have 1 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X220 Processor
-------------------------------------------
Warning: Follow these steps. All of them. If you do, it will work. If you misread or miss a step or skip a step because you are hurrying through the process, it WILL brick your tablet. Flashing is a relatively simple process but it requires patience. If you don't have the time to read all of the directions and follow them, YOU DO NOT HAVE TIME TO FLASH, and stick with your old firmware.
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS ROM HAS CAUSED. FLASH AT YOUR OWN RISK! SINCE THERE ARE SO MANY CLONES OF THIS TABLET, DON'T EXPECT IT WILL WORK PERFECTLY.
-------------------------------------------
Note: I'm not so good in English and grammar, so bear with me. The images is not so clear co'z im using webcam for fast capture and focusing.
If I made mistakes, corrections are welcome.
:: Super Improvement ::
- Much Faster response, you will notice playing Angry Birds is smoother.
- New Default Application updates
- New Icons
- New 3D Gallery
- Supports Flash on browser.
- GPS is now working, GPS app required to test the satellite lock.
- Youtube on browser working fine if you have fast connection.
:: Known Issues ::
- "Some" RJ45 (Ethernet) Port sometimes not working
- "Some" WiFi unstable
- "Some" 3G Device not working
- Market is still free, no paid apps.
- Save path not on MicroSD but inside your Tablet (fixed)
- When it sleeps, it sleep to power off.
- Youtube App is not working, you need to download another compatible version.
:: Thanks to the Donors ::
- Austin Pc Fixed .Com
- frank rugolo
- pastorb1
:: Credits ::
- stragulus
- dgcruzing
- isergio
- _barsuk_
- Aries on an Android (android tablet forum)
- rgocal (android tablet forum)
- and others who I forgot to mention
This guide is for Windows XP, I'm windows7 user before but I downgrade because I want to use my other old softwares for flashing. If you get the idea you can do this also on windows7.
------------------------------
NOTE:
- For windows7 user Run As Administrator the IUW application.
- 64bit Operating System may not work with IUW application.
------------------------------
NOTE: If your tablet showing version 6.1.5 (559[or higher]) or 0.6.1.2(587) Then you can skip some part of the guide. Scroll down directly to the "Alternative Solution" using MicroSD burning. You still need to download the Android 2.2 Froyo Main Firmware.
------------------------------
:: Preparing the Male to Male USB Cable :: (if you have one skip this)
Ok let's start, what you need is a male to male USB cable, if you don't have one you can make your own male to male cable.
Tools
- 2 USB Cable
- Scissor or Cutter
- Electrical Tape or anything to cover the exposed wire
- Solder Lead (Optional)
- Soldering Iron (Optional)
1. Cut each USB to the nearest tip of the female, to make your USB cable longer.
2. Cut each end of the USB to expose the wires and copper wires.
3. Now you can connect each end of the USB, and twist each wires, you can solder it if you like.
4. Now you can tape each wires, and tape all the wires.
This is the finish product.
:: Preparation for Files and Flashing Procedures ::
*Note: Please PM me if there are missing links.
Download IUW 1.1 Flashing Tool
Download Firmware V2852
Download Uboot - V 0.6.1.2(587) working camera
Download Main Android 2.2 Froyo ROM with Flash 10.1
Download New Ramdisk image to change the path of save files to SDCard1
Download Extra Tools Apps
Updated ROM: 25.11.2011
Download Firmware Froyo 2.2 v2.5 #4325
------------------------------------------------------------
:: Clean up the tablet files ::
- Wipe cache partition
- Wipe data/factory reset
- then reboot.
Remove all microSD so that it will not start burning if you have firmware on your microSD.
Visit this link how to clean the data for your tablet.
------------------------------------------------------------
:: Let's Start ::
1. Make a Folder on your desktop for fast track of your files, I named it Froyo 2.2 and save all your downloaded files here.
2. Download IUW Flashing tool, and save it inside the folder of your desktop.
3. After download, unpack it inside the folder.
NOTE: Your tablet should be full charged, and connect the charger while flashing, just to make sure it will not drain much power on your tablet. Don't forget also to remove all your MicroSD cards from the tablet.
4. Since your done making your USB Cable, your tablet should be off and plug the other end USB to the PC and plug the other end on your tablet USB Port between the headphone jack and SDCard Slot 1.
5. Open the IUW application, select Link USB on the left side. And on the Link information the DV (driver) is greyed, because it's not detecting the tablet with driver.
6. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC..."
7. A New Hardware notification will pop up on your PC Screen.
(you have 2 minutes to setup this or the tablet will boot normally)
Select Advance, Next.
Browse the driver from your desktop inside the folder "otg_driver"
Then it will install the driver.
The flasher will turn to green.
:: FLASHING V2852 ::
This rom will only run on tablets which display a version number in the bottom-right "Infotmic" screen when first turned on.. If yours doesn't display a number there, you will need to flash firmware v2852 first.
8. 'Choose a wrapped image' press the "..." button Select the IUS file "WWE10B_Android_393477-v9full.ius"
9. Click 'burn' to flash the tablet.
This picture is flashing the tablet.
10. After burning finishes, plug out the USB cable and press Reset, then restart the device.
:: Flashing UBOOT ::
11. Open UIW application, and connect your tablet USB to PC.
12. Select "Link USB" on "USB Mode:" select "Expert Mode" Uncheck all except "UO".
13. Browse the "u-boot-nand.bin" the one with working camera.
14. After flashing this is the result.
15. Your screen with start to flicker, it will start to initialize.
16. I will take time to load up, until you are in display calibration.
:: Flashing IMAGES ::
17. Power off your tablet, and prepare again the UIW to flash the main android 2.2 firmware.
18. Click Link USB, and select Expert burn.
NOTE: Use the other Ramdisk.img fix you download, not from the flash10.1-android2.2 folder.
19. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC...", if the Dv is green your ready and click the burn button.
20. I will take time to load up, until you are in display calibration and your Done!
:: Alternative Solution ::
If you cant burn the main android image using USB method. You can try the MicroSD card method, but this is only applicable if your tablet will display the version under the InfoTMIC start up logo.
Lets make a bootable MicroSD, to convert the file size to 700~705MB, you need a MicroSD at least 1GB.
Download WinHex with MicroSD Clone Image.
1. Open your WinHex
2. Click Tools->Disk Tools->Clone Disk->
3. On Source Raw Image: click the file button.
locate the "aben.start sector" file, click open.
4. On Destination Medium: click the drive button.
locate the Physical Media of your card reader/MicroSD, ok.
5. Fill in the Start Sector with 0 (zero).
6. Click OK, and WinHex pop up will appear, click OK and it will start cloning the image file to your MicroSD.
7. A notepad will pop up that you are done cloning the image, close and press OK on the pop up message.
8. Close WinHex, and safely remove the card reader/MicroSD.
9. Plug the card reader/MicroSD again, and do a quick format.
10. If you successfully formated the MicroSD to 700~705MB then create an "android" folder, and copy all the main image files on the folder. And your Done! :: If you fail there are some other reason, some card reader is not working properly, try to find another card reader, if your phone has MicroSD Slot and able to communicate and serve as card reader, you can use this also.
- ramdisk (use the other ramdisk you download)
- system
- uImage
- userdata
some optional or skipped file.
- u-boot-nand (android v2.2)
- zSYS (Flytouch Official Image 3245)
This is what's inside the MicroSD on android folder.
12. After copying the files plug the MicroSD at the top most/Slot 1 between the 2 USB port.
13. And Power On your Tablet, and it will start Flashing just like here on the video. http://www.youtube.com/watch?v=47kf4-Vbba8#t=3
You can also use this MicroSD to downgrade back to 3245 firmware.
Thank you.
Don't forget to click the Thank You button
joshgabel said:
SmaRkieS whats your Paypal email address? i owe you $ worked like a charm!
Click to expand...
Click to collapse
Confirmed that the 3G USB modem Huawei E1752 is working perfectly. Just create an APN and reboot while the Huawei E1752 is in the USB port.. After startup it makes a connection and works fast!
manually created an APN in settings/connections/mobile providers and configured for your local provider. Also enabled data connection, otherwise I won't start searching. After that reboot and it started working. No specials actions required.
:: Google Sync ::
If you want to sync the calendar (basic) and contacts go to:
Contacts-> Menu-> Accounts-> Add Account-> Corporate-> enter data for a google account -> choose the default setting -> set the sync options-> Enter the name
:: z4root USB Debug solution ::
1. Download Launcher Pro.
2. Install Launcher Pro.
3. Tap the Home Button at the upper left, it will let you choose different type of launchers.
4. Select Launcher Pro.
5. Tap Menu Button = or at press the menu button at the top of your tablet.
6. Tap the + add
7. Tap Shortcuts
8. Scroll Down, and Tap the Activities.
9. Wait it will load, scroll down to Settings.
10. Scroll down and look for Development.
11. Press OK without changing the name.
12. On Desktop/Home Tap Development.
13. Check the USB Debugging.
14. Restart if necessary.
15. And your done ready to root.
:: Enabling Live Wallpapers ::
1. After rooting your device, your good to go.
2. Install Busybox Installer.
3. Open Busybox Installer, OK, SuperUser request Allow.
4. If BusyBox is not found, tap Install.
5. Press Back Button on your tablet.
6. Install Terminal Emulator.
7. Open Terminal Emulator.
8. Type this commands.
Code:
su
mount -o remount,rw,codepage=utf8,vfat,xattr,check=no /dev/stl5 /system
cat /sdcard/LiveWallpapersPicker.apk > /system/app/LiveWallpapersPicker.apk
cat /sdcard/libRS.so > /system/lib/libRS.so
cat /sdcard/librs_jni.so > /system/lib/librs_jni.so
sample pic of my terminal emulator, I made a mistake in line 5 but it's ok just retype it.
9. Reboot your tablet.
10. Install your live wallpaper apps.
11. On your home screen, tap the menu button. (near the volume next to back)
11. Tap Wallpaper
12. Tap Live wallpapers
13. Select your live wallpapers, and your done.
sample screen shot.
:: GPS Configuration and Setup ::
Download GPS Test Tool
1. Install that app in your tablet.
2. Go to Settings
3. Go to Location & Security
4. Check Use wireless networks
5. Check GPS Satellites
6. Plug your GPS Antenna.
7. Take your antenna outdoor, if the wire is still long try to place the antenna higher.
8. Connect to your WiFi.
9. Run the GPS Status application.
10. Wait for 5~20 mins for satellite discovering and locking.
11. Wait for 5 satellite lock on and you are done.
12. Run your Google Maps, and your locked to your location.
This is the picture number of satellites and number of locked satellites.
The GPS is very accurate.
:: Dismantle/Dissemble of Superpad/Flytouch2 ::
http://www.androidtablets.net/forum/gome-flytouch-ii/14255-inside-my-superpad.html
===========================================================
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.
Other Useful Guides here.
http://forum.xda-developers.com/showthread.php?t=1067746
http://forum.xda-developers.com/showthread.php?t=1048776
http://forum.xda-developers.com/showthread.php?t=831178
-------------------------------------
Good work
25-12-2012 -updated links
Download IUW 1.1 Flashing Tool iuw1.1-english.rar - 291.98 KB
Download Firmware Froyo 2.2 v2.5 #4325 - 4325.zip - 212.16 MB
Download Uboot - V 0.6.1.2(587) working camera u-boot-nand.zip v0.6.1.2(587).zip - 130.13 KB
Download New Ramdisk image to change the path of save files to SDCard1 Ramdisk_SmaRkieS.zip - 166.06 KB
Barsik recovery for superpad flytouch - recovery_rd.zip - 1.32 MB
Thank you, cause this people are lazy enough to open the pdf/docx file instructions hehehehe.
I made some mistakes on my post, please post some corrections and suggestions are welcome also.
Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?
kolk11 said:
Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?
Click to expand...
Click to collapse
Can you see the version under the InfoTMIC start up logo?
If you can see it then you are ready to update using MicroSD method.
@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?
kolk11 said:
@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?
Click to expand...
Click to collapse
dont touch any file inside the folder of 0.6.1.2_1.4.587_OV2655 and 0.6.1.5_1.4.587_GT2005.
Try to burn the UO first, u-boot-nand.bin the one with working camera, if not try this another u-boot-nand.
Then burn the Main Image Android Rom.
Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away
kolk11 said:
Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away
Click to expand...
Click to collapse
I abused my pad flashing many times, and still it is alive, It will brick if your USB cable is poorly made, or overpowered that will fry the motherboard of your tablet, just like what happen to other people.
the safest way to flash is microSD, but it is tricky with this froyo update that's why I risk on flashing using USB.
V 0.6.1.2(587) this one has working camera. But you can try both uboot to display the version under the InfoTMIC logo. But I use V 0.6.1.2(587) coz I want the camera to work fine.
Yes the files inside the 20110416-v1001 folder except for the u-boot-nand inside.
If the USB flashing doesnt work you can try the alternative, using the microSD.
Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz
kolk11 said:
Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz
Click to expand...
Click to collapse
Glad you made it! Check out the speed and the Gallery is now 3D
So you did the UO burn first then Main Image?
Confirm this and I will revise my post.
Co'z I burn my tablet the other way. Main Image then UO.
Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet
kolk11 said:
Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet
Click to expand...
Click to collapse
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.
IUW does not work with 64 bit
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.
quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver
Works as advertised.
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!
I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!
Jiggity Janx said:
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.
Click to expand...
Click to collapse
Yes, that's why I made it with Windows XP, and we are aware that 64bit OS is so choosy in terms of software compatibility.
About the USB Debugging, I already made a guide after the Flashing/Burning guide.
caravanman said:
quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver
Click to expand...
Click to collapse
Yes, It is self understanding, there is a note above I use windows XP, but the idea is still there.
If you like to contribute for a guide in windows 7 is welcomed.
nullandvoid said:
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!
Click to expand...
Click to collapse
You are welcome, enjoy your new faster tablet.
woodeman said:
I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!
Click to expand...
Click to collapse
Thank you so much, but I would like to suggest to remove the long quote of my post, just to make the thread clean.
SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse
kolk11 said:
SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse
pmed you.
Click to expand...
Click to collapse
How to upgrade to Windows 10 on your HTC One M8 for Windows running Windows Phone 8.1
Prerequisites:
a. A Microsoft account. You NEED one to do this. Preferably sync it with your phone BEFORE you do all this, it will make your life so much easier. Even if you are paranoid about Microsoft getting all your data, you STILL need an account to complete the steps here.
b. Several pieces of software. Please use the versions specified in this walkthrough. Other versions have not worked well. You can download them all in a RAR file from: https://mega.nz/#!2JNBTCiZ!tBFDPMFzUu3g7EqulH9BSlFFebv4IcZiPrRSvS_fx88
c. Patience. If you mess up a step, all the way up through the Windows 10 install, you can flash back to stock WP8.1! You can probably even downgrade afterwards.
d. A MicroSD card is required. I didn’t have one installed on the phone before I started, but it’s 100% necessary (I’ll detail why as we proceed).
e. A willingness to completely wipe your phone. This ought to go without saying, but I’ve had people ask me “oh you mean I have to delete EVERYTHING?” Yes. Your phone will be reset to factory at least once in this process.
Credits:
Thanks to Bladeni, on whose instructions this is based. And all the folks at XDA Developers and Betanews, Disqus and a few other places I’m probably forgetting. The guys who wrote WindowsPhoneCustomPFD and CustomWPSystem. And the whole community!
Walkthrough:
1. Backup all your data. Preferably to the cloud. But if you are a privacy nut, put it all on your computer. Or the SD card. Somewhere other than main phone RAM which is going to be completely wiped.
2. Charge your phone to 50%. I know other walkthroughs say 40, and the tools say 25, but the reality is that we don’t know how fast your battery will drain once the phone is in bootloader mode.
3. If for some reason you have Windows Insider or Preview for Developers installed, uninstall them now!
4. Install the Windows Device Recovery Tool on your PC and run it.
5. You may also at this point want to install HTC Sync Manager, just to get the HTC drivers.
6. Restart in bootloader. This is a point of some contention, but basically hold down the power button until the phone tells you to swipe to restart. As soon as the screen goes black, hold down both volume buttons. You should get this screen (those are barcodes under the black swatches):
a. If the phone shuts all the way down, just hit the power button for a long press, then immediately hit the volume buttons. It takes a couple tries if you’ve never done it.
7. Plug the cable into the phone and the computer. Wait for Windows to recognize the device. Check Device manager to make sure it shows up as HTC Phone and not an unknown device.
a. If it shows up as an unknown device, try installing HTC Sync Manager (see list at end).
b. If it STILL shows up as unknown, install HTC Drivers Standalone (see list).
c. If that doesn’t work, as a last resort, right click the unknown device, update driver, and browse to where you unzipped the Fujitsu driver.
8. Once the device is recognized, you may need to hit “My device was not detected” in the Recovery Tool.
a. If you do, browse to “Other OEM’s” and then to “HTC”.
9. Now hit next, don’t give a reason (“Continue without submission”), and wait. After a few minutes, your phone will be back to Windows 8.1 factory image.
10. You need to set up WP8.1 – sign in with your account. If it starts to restore your stuff, let it do so – you have to wait until the queue is clear before you can proceed, so take this time to install the other software you need:
11. Install the WP8.0 SDK Tools Lite Setup. It may give errors about setting up links. Ignore them.
12. Install the WP8.1 SDK Tools Lite Setup. It may give errors also but usually won’t.
13. Once the phone is stable, go to Storage Sense and make sure that apps are set to install TO THE PHONE. This is super important!
14. If for some reason you still have Windows Insider or Preview for Developers installed (you shouldn’t, after step 2), uninstall them now! I’ve seen this happen with Preview for Developers.
15. Under the Windows Phone SDK 8.1 on your PC (NOT THE 8.0!) run “Windows Phone Developer Registration”.
a. Unlock the phone, it HAS to be on the start screen for this to work.
b. Log in with your Windows account (same as on the phone! Very important!) and hit “register”. You can tell it worked because when you run it again, it will say “unregister” (don’t unregister, but you can check!)
16. Under the Windows Phone SDK 8.1 on your PC, run “App Deployment” and select the CustomWPSystem_0500.xap file you previously downloaded. Deploy it.
17. Now open up your phone in explorer, and go to the downloads folder. Drag the CustomPFD_0003.xap into this folder. DO NOT DEPLOY THIS XAP.
18. If you want HTC Sense TV, download it from the store now, since after this step it will be impossible to install.
You are now ready to start modding the phone. Nothing you’ve done until this point has been destructive or done anything other than a reset. Now is the point where you probably void your warranty. You’ve been warned! We are about to hack a Microsoft app to make it into a registry editor.
19. THIS IS CRITICAL. Navigate to storage sense and set apps to install to the SD card. If you don’t do this, NOTHING ELSE WILL WORK FROM HERE ON OUT.
20. This website has a helpful set of screenshots for the next section: http://windowsphonecustompfd.blogspot.com/2015/01/you-need-two-filesfirst-custompfd0003.html?m=1
21. Download the “Preview for Developers” app from the store. Wait for it to finish installing.
22. Run the CustomWPSystem app on your phone.
23. Tap the red button labeled “SD Card Permissions”, then tap SD Card, then hit the check mark. The button should turn green.
24. Make sure “Preview for Developers” is selected (it is the default).
25. Now select the CustomPFD_0003.xap file using the select button.
26. Hit “apply XAP”. IF THE APP CRASHES AT THIS POINT, you have done something wrong. Most likely you didn’t set apps to download to the phone and SD card at the right places. The CustomWPSystem app MUST be installed on the phone and the Preview for Developers app MUST be installed to the SD card. You MUST be logged in with the correct Windows account. Go back and check everything again. If you have to, drop back to the system restore again using the Recovery Tool.
27. Go to the apps pane, and you should see that Preview for Developers now has a weird green icon with a key on it instead of the purple icon it came with. If it doesn’t, see step 25.
OK, for real. Now you’re going to void the warranty, since you’re about to edit the registry. Basically we are about to trick the phone into thinking that it’s a Nokia Lumia 735, which is a phone with roughly similar specs to this one, at least as far as the Windows 10 update process is concerned.
28. Run the Preview for Developers. This is now a modifier registry editor. You’ll see “cannot write here”. That’s normal. Navigate to:
a. HKLM (HKEY_LOCAL_MACHINE)
b. SYSTEM
c. Platform
d. DeviceTargetingInfo
29. Now you’ll see you can write. So let’s find the keys we need. There are three. In each case, pick the key, then you’ll do this:
a. Hit the plus at the bottom.
b. Put the name of the key in the top field.
c. Pick “String” instead of “Key”.
d. Put the required data in the bottom field.
e. Hit “write”.
30. If your screen doesn’t move the keyboard out of the way, just hit back (ONLY ONCE) to get the other fields to show.
31. The three keys, with their data, are as follows. Remember they should all be set to type “string”:
a. PhoneManufacturer (yes, caps are important and leave off the quotes) is currently “HTC”, change it to “NOKIA”.
b. PhoneManufacturerModelName is currenly “HTC6995LVW”, change it to “RM-1089_1087”.
c. PhoneModelName is currenly “HTC6995LVW”, change it to “Lumia 735”.
32. Double check them by clicking back into them one at a time. Make sure the data is correct.
33. Download the “Windows Insider App” from the app store, and run it.
34. Register, and click “get insider builds”. When presented with a choice, choose the top selection. This is called the “Fast Ring”. It gets you the latest preview build, which is needed for bug fixes for the HTC One M8. Prior builds – stable and prod – don’t have the keyboard or SIM card working properly.
35. Reboot.
36. After reboot, check for updates the normal way. You should see an update starting. This is Windows 10. Let it install. THIS TAKES A LONG TIME.
37. Once you’ve rebooted into Windows 10, there will be a lot of other updates. Be patient and eventually it will be time to proceed.
38. Go to your app pane – notice that the Insider app as well as the Preview app are all the way at the top under “recently added”. The Preview app has no text, just an icon. This is normal.
39. Run the Preview app, and reverse the steps above to restore the original values (HTC, HTC6995LVW, HTC6995LVW) to the keys in steps 29-31.
a. If your Preview app is missing, you can try the Interop tools (included here) but they crash on a lot of builds for a lot of people when you try to go into the “Platform” subkey of the registry.
b. To install Interop tools, just load the file onto your phone and go run it from file explorer.
c. To run Interop tools (it isn’t an app, it’s a control panel applet!), go to settings->extras->interop tools.
40. Run the Insider app again, and this time put it onto release ring (the bottom option). This is optional – you can choose to continue to get all the latest options, but the latest ones tend to be buggier. I will update these instructions when the release build is good enough for the HTC One m8 to use in step 34. But for now, you may want to do this step.
Again, the download location is:
https://mega.nz/#!2JNBTCiZ!tBFDPMFzUu3g7EqulH9BSlFFebv4IcZiPrRSvS_fx88
I have an issue on Step 15.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have unregistered and registered 3 times and still I cannot deploy.
And you reformatted the phone (factory reset) in the earlier step?
Same Problem
I encountered the exactly same problem on Step 15. Solution?
completed.! (31-10-2016) but I'm not convertible into Vietnam language .
quocthai75 said:
completed.! (31-10-2016) but I'm not convertible into Vietnam language .
Click to expand...
Click to collapse
I try to do it again and stuck here.!!!!!!!!! Microsoft seems to have seen and prevent.!
Yes I did flash to OEM. I have opened a case with Microsoft as well to see why it says I have to many unlocks when my Dev account shows no unlocks.
That's interesting. Maybe they wised up to this method? I'll try an play around with it again this upcoming weekend. As a quick check, can you try using the 8.0 version of the app loader?
I appreciate that. I also submitted a support ticket with Microsoft and they refused to help, instead directing me to the forums, which advised me to ... submit a support ticket. I reset my phone to OEM and same error message. But I have confidence you'll be able to outsmart them. Thanks.
---------- Post added at 05:54 PM ---------- Previous post was at 05:45 PM ----------
I also tried 8.0 application deployer. No luck. Same error message. Not sure this is related, but I have a developer account and my phone, even when registered as unlocked using SDK tool, will not appear in the Dev Center's Dashboard as an unlocked device. And when I try to open Preview for Developers on my phone, I log in with the same username and password as my developer account but it won't recognize that and sends me to a page to buy a developer account.
MarkinSD said:
I appreciate that. I also submitted a support ticket with Microsoft and they refused to help, instead directing me to the forums, which advised me to ... submit a support ticket. I reset my phone to OEM and same error message. But I have confidence you'll be able to outsmart them. Thanks.
---------- Post added at 05:54 PM ---------- Previous post was at 05:45 PM ----------
I also tried 8.0 application deployer. No luck. Same error message. Not sure this is related, but I have a developer account and my phone, even when registered as unlocked using SDK tool, will not appear in the Dev Center's Dashboard as an unlocked device. And when I try to open Preview for Developers on my phone, I log in with the same username and password as my developer account but it won't recognize that and sends me to a page to buy a developer account.
Click to expand...
Click to collapse
Uh-oh. It sounds like they have killed the "one phone for non-developers" workaround that they had previously put in place. I don't have a test phone - the one I upgraded has become my daily driver - but I'll see what I can figure out.
I did I! I made it through. Microsoft fixed my developer account and I went all the way through. Do I need to relock the phone or no? Also should I uninstall the XAP 003 app or the reg editor?
quocthai75 said:
I try to do it again and stuck here.!!!!!!!!! Microsoft seems to have seen and prevent.!
Click to expand...
Click to collapse
Microsoft limitations of the app installation for free account dev
I used another free account and everything is perfect, but Windows Insider problem, I didn't find the building in there...
Success
Worked perfectly once Microsoft fixed app deployment problem. Appreciate all your hard work setting this up!
What build of Windows 10 should I have? I currently have 10586.107. Is there a way to get a more current build?
had a couple of these phones laying around after we switched to Lumia 735s this worked just fine, i will say one thing the phone got very hot! i nearly dropped the phone when i picked it up, after all the updates it cooled down and is running like a dream so far
To update to a higher build
MarkinSD said:
What build of Windows 10 should I have? I currently have 10586.107. Is there a way to get a more current build?
Click to expand...
Click to collapse
Ensure you enable developer mode on your phone
Install Interop on your device and follow instruction
. Open Interop Tools (Settings->Extras)
Please take a snap shot of the original setting before alerting, this is very important
Click the "Registry Browser" button
Open "HKEY_LOCAL_MACHINE"
Open "SYSTEM"
Open "Platform"
Open "DeviceTargetingInfo"
Open "PhoneManufacturer"
In the "Value Data" field, enter "NOKIA" (all caps). Click "Write"
Open "PhoneManufacturerModelName"
In the "Value Data" field, enter "RM-1089_1087". Click "Write"
Open "PhoneModelName"
In the "Value Data" field, enter "Lumia 735". Click "Write"
Run Windows Update in fast or slow ring
Restart phone after update and change by to the default values
Click the "Registry Browser" button
Open "HKEY_LOCAL_MACHINE"
Open "SYSTEM"
Open "Platform"
Open "DeviceTargetingInfo"
Open "PhoneManufacturer"
In the "Value Data" field, enter "HTC" (all caps). Click "Write"
Open "PhoneManufacturerModelName"
In the "Value Data" field, enter "HTC6995LVW". Click "Write"
Open "PhoneModelName"
In the "Value Data" field, enter "HTC6995LVW". Click "Write"
HTC M8 Windows to Windows 10 mobile lastest build
Instructions to root HTC One M8 with Windows Phone 8.1 to install Windows 10 mobile
1. Backup all your pictures, videos, music and files to your SD card or your Computer, remember every thing will be erased
2. Download the latest Windows Device Recovery Tool
3. Ensure that your battery charge is 40%.
4. Restart your phone and hold down the volume keys at the same time.
5. If there is a gear and lighting symbol restart the phone again because you were unsuccessful.
6. To restart the phone hold down the Power and volume down key until the phone vibrates
7. Immediately hold down the both volume keys.
8. One successful you will see a white screen appear with the phone serial number another information.
9. Connect to the phone with the USB cable to the computer with windows device recovery tool open
10. If the windows device recovery tool shows the message: My device was not detected
11. Click My device was not detected and click Other OEMs and Select HTC
12. Click next and continue without submission. Please note formatting your phone back to factory is very important to registering your phone in further steps.
13. At this point your phone should be formatting to Windows Phone 8.1
14. Complete initial setup of the phone on Windows Phone 8.1
15. Ensure that you signed in with a Microsoft account.
16. Download files WP8.0 SDK Tools Lite Setup Av1.20
17. Download files WP8.1 SDK Tools Lite Setup Av1.20
18. The files are normally in a zip format use WinRAR to extract them
19. Extract contents of the zip files and run the InstallWP80SDKToolsLite bat file.
20. Extract contents of the zip files and run the InstallWP81SDKToolsLite bat file.
21. Click start navigate to Windows phone SDK 8.0 then click Windows Phone developer registration.
22. Ensure that the device is on, unlocked and in the start screen.
23. Click Register. Wait, for the pop up window for you to enter your Microsoft account.
24. Enter to same Microsoft account that you are using on the phone.
25. One successfully completed you would see the option to Unregister.
26. Download the XAP file: CustomWPSystem_0500.xap
27. Note if the file is downloaded with a zip extension change the extension to XAP.
28. For example: CustomWPSystem_0500.zip to CustomWPSystem_0500.xap
29. Click start navigate to Windows phone SDK 8.0 then click application deployment.
30. Ensure that the device is on, unlocked and in the start screen.
31. Click browse in application deployment, navigate to the CustomWPSystem_0500.xap you downloaded
32. Select the file and click deploy.
33. Download the file CustomPDF_0003.xap as stated before if it is zip change it to xap
34. Copy CustomPDF_0003.xap to your phone internal memory in documents
35. Go to storage sense and set app, to be installed on SD card.
36. Open this website :
37.
38. Use the above website as a visual reference
39. Open the deployed app CustomWPSystem on your phone
40. Follow the instructions in the app. Tap SD card permission
41. Select the SD card root folder this means navigate to the SD card and no other sub folder and tap the tick
42. SD card permission should be green
43. Click download from the store to download Preview for developers after the app is installed hold the back and app switch back to CustomWPSystem app
44. Scroll down and click select the XAP, navigate to the CustomPDF_0003.xap file located on your phone
45. Click Apply the Xap once finished
46. Open the Preview for developers app the icon has change to greenish color with a key
47. Follow these instructions
48. Please take screen shots by pressing volume Up and the power button at the same time before making changes
49.
50.
51. Open "HKEY_LOCAL_MACHINE" Or HKLM
52. Open "SYSTEM"
53. Open "Platform"
54. Open "DeviceTargetingInfo"
55. Once the Application was applied properly you will notice on the top a message: you can write hear
56. Open "PhoneManufacturer"
57. Ensure you take a screen shoot and note the original values
58. Click the Plus button at the bottom
59. In the first field enter: PhoneManufacturer
60. Change Type to String
61. In the last "Value Data" field, enter "NOKIA" (all caps). Click "Write" please do not enter inverted comma.
62. Press the back arrow in Windows phone 8.1
63. Open "PhoneManufacturerModelName"
64. Ensure you take a screen shoot and note the original values
65. Click the Plus button at the bottom
66. In the first field enter: PhoneManufacturerModelName
67. Change Type to String
68. In the "Value Data" field, enter "RM-1089_1087". Click "Write" please do not enter inverted comma.
69. Press the back arrow in Windows phone 8.1
70. Open "PhoneModelName"
71. Ensure you take a screen shoot and note the original values
72. Click the Plus button at the bottom
73. In the first field enter: PhoneManufacturerModelName
74. Change Type to String
75. In the "Value Data" field, enter "Lumia 735". Click "Write"
76. Press the back arrow in Windows phone 8.1
77. Please note HTC sense tv can only be downloaded in Windows phone 8.1 store if you update before downloading it you will never be able to download for deploy it to your windows 10 mobile phone.
78. Once you have modified the registry
79. Download and open the Windows Insider app
80. Join the fast ring. Reboot your device when prompted.
81. After the reboot, check for updates and you should start downloading the latest Redstone build.
82. Repeat steps after windows 10 installation to restore your previous registry values
83. Do this only after you have reached the lastest build
84. Please note however you will lose HTC sense tv app after the factory reset
85. Download : InteropToolsApp_0.0.2.0_arm.appxbundle
86. Open Interop Tools locate in (Settings->Extras)
87. Click the "Registry Browser" button
88. Open "HKEY_LOCAL_MACHINE"
89. Open "SYSTEM"
90. Open "Platform"
91. Open "DeviceTargetingInfo"
92. Open "PhoneManufacturer"
93. In the "Value Data" field, enter "HTC" (all caps). Click "Write"
94. Open "PhoneManufacturerModelName"
95. Enter the appropriate Original Value below.
96. In the "Value Data" field, enter "HTC6995LVW". Click "Write"
97. Open "PhoneModelName"
98. In the "Value Data" field, enter "HTC6995LVW". Click "Write"
The files can be found in xda-developers.
•
First off - thank you for these instructions, they are excellent!!! I BELIEVE I have followed everything to the 'T'...unfortunately, I am stuck at step "80", I install Windows Insider with no problem, then I open it, select "Get preview builds" (my only option) and get the message "Server Error - A connection error prevented us from downloading programs for you. Please check the date/time of your device and its network connection and try again.". I have tried:
Turning it off and back on.
'Soft' reset
Setting time manually
Setting to Pacific time zone (what it defaulted to when I started it up)
Uninstalling/reinstalling Windows Insider (with reboots in-between)
Checking all registry edits, re-doing them
Researching this error online has not yielded any solutions outside the ones I have already tried.
Can anyone help/suggest something please? Thanks!
I am having the same problem with windows insider, server error, thanks for any help
I resolved my issue - by leveraging another forum in addition to all the great information on this one, here's the link: http://forums.windowscentral.com/htc-one-m8-windows/426772-5.htm and below are the exact instructions. it's a little bit of a hassle to pull the cabs but IT WORKS. I started right from where I couldn't move forward (step 80), though I uninstalled Windows Insider and put the registry settings back to 'normal' until this was complete. Interestingly, after completing and REINSTALLING Windows Insider, same error BUT Windows Update from control panel seems to work. It has restarted/rebooted several times but is now on the most recent update (November 9th) that I know of. No glitches (YET) to report, except for battery life seems shorter. Hope this helps someone!
Excerpt (starts from step 2 because step 1 is the Windows device recovery tool resetting device to 8.1 - if you've followed these instructions up to this point you don't need to do that)
....
2. Go to this site: 14219-10586 htc w8 tmous (0P6B140) - Pastebin.com and grab all of the .cab file urls. These urls are from this thread: [W10M BUILDS] Update links collection (cab-f… | Windows 10 Development and Hacking)
3. This is the part that sucks... Paste each url into a browser to download the file (you should end up with 47 files) - on a side note, if anyone doesn't want to do this, I could paste a link to a zipped folder with all of the files
4. Place all the files into a folder named "cabs" in your C: drive (ex: C:\cabs)
5. Download and install the Windows Driver Kit from http://go.microsoft.com/fwlink/p/?LinkId=526733
6. Open command prompt (windows + R then "cmd") and enter this command (places you in the proper folder to execute the next command): cd C:\Program Files (x86)\Windows Kits\10\Tools\bin\i386
7. While your phone is connected to the PC, run the command: iutool.exe -V -p "C:\cabs" - it will take a while to execute as it transfers, then installs all 47 files. I think it took about 75-90 minutes for me.
Once that finishes, you'll be on build 10586.11
Once you've completed those steps, you can follow the directions posted by benj1091 at the beginning of the thread to OP the registry (via Interop Tools) to match a Lumia 735. If you want, you can then (or before) install Windows Insider to select your insider ring.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description:
Viewing Android file system by ADB in native Windows Explorer.
Accordingly, copying files, installation APK, create screenshots: ADB utility is used (included in the installer).
Virtual Folder "Network ADB" is added to "My Computer"
----
1) Copy the Windows-Android, Android-Windows, Android-Android
2) Create a new folder
3) Delete the folder / file
4) Create a Link for Windows - move the Android-Windows while holding down the left mouse button
----
1) The context menu on any folder, any drive - Creating a screenshot (in the folder place the device screenshot)
2) Right-click the APK file - install apk on your device
----
1) Requires .NET Framework 4.0
2) Tested only on Windows 7, the behavior of other systems not tested.
3) Tested: on Android 5 - 7
mobiles: nexus 6p, sony xperia, samsung note 3
Sony Android TV: KD-55x9305c, KDL-55w807c
Instruction:
1) Turn on your mobile (android TV) - developer mode.
1.1 Go to the "Settings" section and select "About phone (or on TV)"
1.2 find the "Build Number", click on it seven times (the system will report that enabled mode)
1.3 In the setting will be a new item - Developer Mode
2) In option "developer mode" enable - "remote debug"
3) After install my application - in context menu click - "Preferces" and type IP Adress (port 5555 not change - this is ADB port)
4) in context menu click - Connect. In TV or Mobile message appears for authorization to operate the device with your computer - click allow. Amen, in Windows Explorer, you should see a Android file system.
--- change device to using network:
1) connected via USB
2) run command: adb.exe tcpip 5555
3) Disconnect USB
latest adb.exe - contains in installer. If Installed Android Studio - delete in current dirrectory adb.exe - extension will work with adb.exe installed in android studio.
--- this extension only wrapper for adb
VERSION 0.0.3
1) Add Install apk progress window
2) Set permissions+owner/group
Installer for Windows x64: View attachment NetworkADB-x64-003.zip
Version 0.0.2
1) add console
2) change adb path, multi-devices support (wifi-usb-emulator etc)
Installer for Windows x64: View attachment NetworkADB-x64-002.zip
Installer for Windows x32:View attachment NetworkADB-x32-002.zip
if no work: rty version in this post
version 0.0.1
Installer for Windows x64: View attachment NetworkADB-x64.zip
Installer for Windows x32: View attachment NetworkADB-x32.zip
Source code (VS 2012 C#): View attachment NetworkADB-src.zip
Main russian forum in 4pda - "Network ADB for Windows"
Hi, when I run this, nothing comes up I downlaod Framework 4 running on 64 win 7
@svansvan is it support English language ?
Hamidreza2010 said:
@svansvan is it support English language ?
Click to expand...
Click to collapse
it is ONLY in English
zfk110 said:
Hi, when I run this, nothing comes up I downlaod Framework 4 running on 64 win 7
Click to expand...
Click to collapse
1) Install Framework 4
2) You download NetworkADB-x64.zip unzip and run NetworkADB.exe and click Install.
In Windows Explorer (not IE) in folder My PC (in left treview) should appear "Network ADB"
-------
if you tried to install the program without Framework 4.
1) Install Framework 4
2) Uninstall NetworkADB
3) Install NetworkADB
------------
~200 downloads from this site
~300 in russian
no comments or reviews.
It means all everything works well
svansvan said:
it is ONLY in English
1) Install Framework 4
2) You download NetworkADB-x64.zip unzip and run NetworkADB.exe and click Install.
In Windows Explorer (not IE) in folder My PC (in left treview) should appear "Network ADB"
-------
if you tried to install the program without Framework 4.
1) Install Framework 4
2) Uninstall NetworkADB
3) Install NetworkADB
------------
~200 downloads from this site
~300 in russian
no comments or reviews.
It means all everything works well
Click to expand...
Click to collapse
Please see this video to see whats doing it, I already installed net 4 on the system
https://drive.google.com/open?id=0B8UIJJhXQ-yfVWJkVGNWUjdpcWM
video course terrible quality
After install:
1) in LEFT side of Explorer window (tree)
You have "My computer" in this item you have disks C,D... You have item "network adb"?
2) in context menu on item Network Adb (right mouse click) you have "properties, connect, disconnect etc" items ?
---
Like as in attached screens in main post.
---
Do you run install exe as administrator?
Do you restart windows after instal Framework 4 ?
In same folder (where you run install.exe) You will have some files. 2 ddl's must be registered in system. may, for whatever reason, they did not register. there need to debug deeper knowledge and only Monday I will be able to give more detailed instructions
New 0.0.2 version in header.
1) add adb console window
2) change adb path,
3) multi-devices : support selection (wifi-usb-emulator etc)
----
Before installing, you must uninstall the previous version.
Crashes at startup
Hi,
just tried it, it installs fine and i have the icon in explorer.
But it crashes at startup, win7, 32bit, your adb version 32bit 002.
See attched image for the crash info.
Hope you can do somthing about it, thanks!
JJSJJS said:
Hi,
just tried it, it installs fine and i have the icon in explorer.
But it crashes at startup, win7, 32bit, your adb version 32bit 002.
See attched image for the crash info.
Hope you can do somthing about it, thanks!
Click to expand...
Click to collapse
Try this Release x32 version. Before install - uninstall old version.
(This error is probably due to the fact that the version was in Debug)
I do not have 32 windows, so I can not test
View attachment NetworkADB-x32.zip
Many Thanks Svansvan,
i will try it and report back.
***edit***
Sorry to inform you, the bug is still there. So installing is still ok, but it crashes immidiately after double clicking.
JJSJJS said:
Sorry to inform you, the bug is still there. So installing is still ok, but it crashes immidiately after double clicking.
Click to expand...
Click to collapse
What version number .NET Framework ? (it should be 4.+)
I have only 64 bit Windows 7. I can only compile in 32. Only one person with a 32 bit version left a tip (in russian forum - all works), but it has windows 10.
By the way, I do not guarantee the work in Windows 10 too (it works, but there are 3 bugs)
With this data, I can not know what the problem is: something is wrong with your system or is it a problem in my code.
People download, but do not leave comments
In this case, I upload the source code. Can someone help you faster. I did not get to fixing the problems in Windows 10 (and I do not know when it will be)
Last Try (added strong named key for dll`s + fix assembly):
View attachment NetworkADB-x32.zip
View attachment NetworkADB-x64.zip
Hi,
i have .NET 4.5.1 installed. And only Win7Pro.
I will try your latest x32 and report back.
Thanks a lot!
JJSJJS said:
Hi,
i have .NET 4.5.1 installed. And only Win7Pro.
I will try your latest x32 and report back.
Thanks a lot!
Click to expand...
Click to collapse
If it does not work at all, try update .NET to 4.6 version and restart PC.
do you have this path: C:\Windows\Microsoft.NET\Framework\v4.0.30319\RegAsm.exe
if folder v4.0.30319 not exist, try find in folders(subfolders) C:\Windows\Microsoft.NET\Framework program RegAsm.exe
This program is needed to register 2 dll`s (WindowsShell.dll, NsEx3.dll).
copy RegAsm.exe to install folder (where placed NetworkADB.exe)
in console (run console as administrator!) run:
1) RegAsm.exe WindowsShell.dll /codebase
2) RegAsm.exe NsEx3.dll /codebase
in output you can see like: Types are registered successfully
In general, the entire installation is reduced to registering these two dll files using the .NET program regasm.exe
If the registration is successful - everything will work.
After, using Task Manager - kill process explorer.exe, and run new task explorer.exe (restart explorer.exe)
This is the maximally-extended technical documentation that I could give.
Hi Svansvan,
yes i have the folders and the exe.
First i will update to 4.6.x .NET , restart and do as you said.
I will report back, thanks for your great help!
***edit*** according to the check of the DWORD in the registry as mentioned on this page https://msdn.microsoft.com/en-us/library/hh925568(v=vs.110).aspx#net_d
I have 4.6.2 already installed, so far so good.
***2nd edit*** i have a nsext3.dll, but not nsex3.dll also not a windowsshell.dll, can you provide them please?
Thanks a lot!
Hi svansvan!!
For me it worked at first without having to do anything, just install it.
I have Windows 10 x64, Samsung Galaxy S5 with Nemesis Reborn ROM and Phoenix v13 kernel.
Only thing i miss is an option to change permissions.
Thanks!!!
Finally someone left a comment. Many thanks!
Without this, I did not want to continue my work
acid981 said:
Only thing i miss is an option to change permissions.
Click to expand...
Click to collapse
Just now i worked on this (and installation APK file progress dialog... etc...)
-----
But first, I want to understand why does not work on Windows x32
---------------------------------------------------
JJSJJS said:
i have a nsext3.dll, but not nsex3.dll also not a windowsshell.dll, can you provide them please?
Thanks a lot!
Click to expand...
Click to collapse
In this post! (not in header and other posts!)
https://forum.xda-developers.com/showpost.php?p=71636023&postcount=11
download NetworkADB-x32.zip and unzip (not run in zip folder(program) view) in SEPARATE Folder file NetworkADB.exe
and run it and click install.
You must have the following files in your folder:
--------
adb.exe - from android sdk
adbwinapi.dll - from android sdk
adbwinusbapi.dll - from android sdk
NetworkADB.exe - installator
nsex3.dll - need register
regasm.exe - from .NET (for registration nsex3.dll and windowsshell.dll)
windowsshell.dll - need register
--------
And yes, in OLD version It was nsext3.dll, But in the new version it is called nsex3.dll (without 't').
And there can not be not present windowsshell.dll ! Physically just can not be that it was not present.
The only thing I can think of - is that it for some reason removes antivirus program.
I specifically downloaded it again and installed it. Everything is there.
Just in case, I attached it to you separately:
View attachment windowsshell-dll.zip
but it is not necessary, if everything is done correctly
svansvan said:
in console (run console as administrator!) run:
1) RegAsm.exe WindowsShell.dll /codebase
2) RegAsm.exe NsEx3.dll /codebase
in output you can see like: Types are registered successfully
In general, the entire installation is reduced to registering these two dll files using the .NET program regasm.exe
If the registration is successful - everything will work.
After, using Task Manager - kill process explorer.exe, and run new task explorer.exe (restart explorer.exe)
Click to expand...
Click to collapse
Hi Svansvan,
i did as you described above.
It al registers perfectly. But starting the program still gives the Just in Time Debug error.
Is there something that need to be done in Visual Studio which needs to be enabled, just like the error messsage says (in above post) ?
Sorry for all this trouble. Hoep you can find what the issue can be.
Have a good weekend.
acid981 said:
Only thing i miss is an option to change permissions.
Thanks!!!
Click to expand...
Click to collapse
New version in header 0.0.3 - permissions
-----
Only x64. As far as I understand, x32 version - no working (I do not know why yet)
svansvan said:
New version in header 0.0.3 - permissions
-----
Only x64. As far as I understand, x32 version - no working (I do not know why yet)
Click to expand...
Click to collapse
Thank you very much svansvan.
It's working for me with no issues... it's perfect.:good:
thanks again
acid981 said:
Thank you very much svansvan.
Click to expand...
Click to collapse
There is only one bug: if open two (or more) windows explorers with the same folder.
You change the permissions in one window. In other windows they do not visually change
You need to refresh them (right click in context menu - refresh or reload)
The case is rare and insignificant, but it's a bug.
----
There will be other wishes - leave comments
This guide is the only one made and tested personally by me, I am not responsible for malfunctions or any damage to the device, carefully read every single step and everything will be successful
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[ATTENTION]: Before proceeding, save all your data on your computer and REMOVE ANY KIND OF UNLOCKING (sequence, pin, fingerprint etc ..); remove the sim and the microSD; get a microSD, at least 3/4 giga, where you can upload the files necessary for the procedure.
[NECESSARY CONDITIONS]: Starting from emui 8; have the cell phone charged to 100%; bootloader unlocked and the only procedure I know and working is the one I propose in the guide, the code is obtained by paying 4 €/$, THERE ARE NO FREE ALTERNATIVES.
[PREREQUISITES]: Download -> HiSuite , Dc-Unlocker
At this point we create a folder on the desktop and we will call it ANDROID1O to have a reference point and we will extract the folder contained in the dc-unlocker archive. Once the folder has been extracted, install adb and fastboot in order. At this point we can also install HiSuite.
[PROCEDURE]
[DOWNGRADE] In
order for dc-unlocker to read the bootloader code it is necessary to go back to an older version of android, so let's proceed as follows:
(1) We connect the mobile phone to the computer and start HiSuite, in some cases it will start automatically, and we follow the procedure that will be shown to us to enable debugging. If you have followed everything correctly HiSuite will read your device without problems.
(2) Remaining on HiSuite, click on the UPDATE SYSTEM item, a window will appear, at this point we can press on PREVIOUS VERSION (now I don't remember the precise wording) and we can start the downgrade. It will take a while.
(3) At the end of the downgrade we can start the mobile phone by skipping and ignoring the various configurations by putting the language in Italian as a matter of practicality, let's move on to the next step
[GET BOOTLOADER CODE]
(1) We go to the system settings ---> information ----> we do many taps until the message "now you are a developer" appears ----> we go back ----> developer options and activate usb debugging.
(2) Let's go to HiSuite and in the settings located at the top right we remove the check mark under "Start when it connects to the device" and close it.
(3) We buy the credits to read the bootloader code from https://www.dc-unlocker.com/buy in this way:
- We select the payment method
- We leave "new user account"
- We enter a username that we like it
- We enter an e-mail address to which we can easily access, here we will be sent the credentials to be able to access dc-ulocker
- We enter 4 in the credits box and then type on confirm
- If everything went well, the screen will appear with the credentials and you will receive a copy on the email
(We now have the necessary credits to be able to read the unlock code)
(4) Let's go back to the folder created on the desktop and start dc-unlocker and clicking on the SERVER item we enter the credentials obtained on the site
(5) At this point in the drop-down at the top left we look for the item HUAWEI PHONES
(6) A guide will appear that in any case I will report here:
- In the call keypad type the following combination * # * # 2846579 # * # *
- Press on MANUFACTURE MODE
(7) We can connect the mobile phone and press on the magnifying glass we see on dc-unlocker and if we have done everything correctly the program it will detect our mobile phone
(8) When the phone has been recognized we go to the UNLOCKING section and press on READ BOOTLOADER CODE, if we have done everything correctly we will get a code that we will enter somewhere so as not to lose it, we will need it later
(I leave you the video dc-unlocker official guide on how to unlock bootloader if you have any doubts ---> Help
(9) We disconnect the mobile phone from the computer
(10) After writing down the bootloader code we can close dc-unlocker, connect the mobile phone to a wifi network and search for system updates to return to the latest version of android and therefore to emui8,
if no updates appear, we try to force them by going to settings, wifi, press and hold on the wifi to which we are connected, modify, check advanced options, press on proxy, manual,
in proxy hostname we write localhost and in the port we write 8080 , we press on connect and if we return to the updates item it should find the most recent version. At this point we can update the mobile phone to the most recent version.
[BOOTLOADER UNLOCK]
(1) After returning to the most recent version of android we turn on the mobile phone
(2) We go to the system settings ---> information ----> do many taps until the message "you are now a developer "----> go back ----> developer options and activate the usb debug and the active voice unlock manufacturer
(3) We connect the mobile phone to the computer, press on transfer files, go back to the developer settings and activate the debug , at this point the mobile will ask us to give permissions to our computer and we confirm
(4) Let's go back to the desktop and at the top right click on file, open windows powershell, open windows poweshell as administrator and click on yes
(5) We type the command "adb devices" (write it without quotes), we wait for the end of the 'execution of the command and type again the command "adb devices" (without quotes)
and so we will see a number that corresponds to our mobile phone
(6) We give the command "adb reboot bootloader" (without quotes) and we send
(7) The mobile phone will start in a white screen with an android, the important thing is that two written in red appear with the words PHONE Unlocked and FRP Unlock
(8) From the Widows poweshell screen opened previously we give the command "fastboot oem unlock CODICEBOOTLOADER" (without quotation marks) (CODICEBOOTLOADER refers to the code obtained with Dc-Unlocker) and press on
enter (9) On the cellualre a warning will appear, press once the volume up key and then the power key to confirm the unlocking of the bootloader
(10) When the procedure is finished, it will take very little time, we give the command "fastboot reboot" (without quotes) and when the mobile phone screen it will go black we unplug it
(11) The cellualre will restart a couple of times with a white and other yellow writing, let it go, it will be returned to the factory settings and we will just have to skip all the configuration procedures but set the language in Italian
Finally the bootloader is unlocked!
Here's a free way https://github.com/SkyEmie/huawei-honor-unlock-bootloader
JanoRasho13 said:
Here's a free way https://github.com/SkyEmie/huawei-honor-unlock-bootloader
Click to expand...
Click to collapse
You try this?
pitrazzu said:
You try this?
Click to expand...
Click to collapse
I didn't, but a friend of mine with p20 lite succeeded unlocking!
JanoRasho13 said:
I didn't, but a friend of mine with p20 lite succeeded unlocking!
Click to expand...
Click to collapse
Knowing this sooner I would do it with this tool. Anyway good to knoe but I don't think I would stay with Huawei brand due to their anti-community mods policy.
DunoCZ said:
Knowing this sooner I would do it with this tool. Anyway good to knoe but I don't think I would stay with Huawei brand due to their anti-community mods policy.
Click to expand...
Click to collapse
Yes, absolutelly. Why you prevent me to mod my phone if the phone is mine?
Here is a free alternative to DC-UNLOCKER
I've unlocked the bootloader and installed TWRP on my wife's phone (emui 8 up to date dec 2020)
Here is the program : Potato NV
Follow these instructions : PotatoNV - wiki
To find where the testpoint is located search for pralx1 STF testpoint on your favourite internet search engine.
PS : By the way, the understanding of how it works goes way beyond my technical skills...
Junkilito said:
Here is a free alternative to DC-UNLOCKER
I've unlocked the bootloader and installed TWRP on my wife's phone (emui 8 up to date dec 2020)
Here is the program : Potato NV
Follow these instructions : PotatoNV - wiki
To find where the testpoint is located search for pralx1 STF testpoint on your favourite internet search engine.
PS : By the way, the understanding of how it works goes way beyond my technical skills...
Click to expand...
Click to collapse
And that means I no longer need to downgrade?
gabefufezan said:
And that means I no longer need to downgrade?
Click to expand...
Click to collapse
I didn't need to downgrade. I've just downgraded after the unlock via dload in order to install Android 11 Rom.
JanoRasho13 said:
Here's a free way https://github.com/SkyEmie/huawei-honor-unlock-bootloader
Click to expand...
Click to collapse
I want to try this way. Did it work for you guys?
This is supossed to happen, right?
gabefufezan said:
View attachment 5273573This is supossed to happen, right?
Click to expand...
Click to collapse
It's almost impossible to find it randomly. There are too many combinations...
If you read the issue section of this git, you'll see it by yourself.
Junkilito said:
It's almost impossible to find it randomly. There are too many combinations...
If you read the issue section of this git, you'll see it by yourself.
Click to expand...
Click to collapse
So that means the tool is unefficient?
gabefufezan said:
So that means the tool is unefficient?
Click to expand...
Click to collapse
I think so.
gabefufezan said:
So that means the tool is unefficient?
Click to expand...
Click to collapse
I tried but It didn't work. Unfortunately I had an aplhanumeric code despite that my device was european, and this made impossible the task to find the code ( it would take millions of years to do a minimum percentage of combinations ).
I found it using PotatoNV, it adds the difficult part to disassemble the phone but it is very efficient.
gabefufezan said:
View attachment 5273573This is supossed to happen, right?
Click to expand...
Click to collapse
It is not supposed to happen this way. You have to see something like "fastboot error: wrong password", so you're probably missing some permissions.
Anyway unless you have a numeric code there is virtually zero chance to find it in that way.
In my case I ran the script and in ~4 hours it tried all the numeric codes supposed to fit with my imei, but with no success. Later I discovered that my code was alphanumeric.
Hi everyone, I've just obtained te bootloader code, but now I'm stuck on EMUI 5.0.3, there are no updates available.
I tried forcing it but nothing changes..
On my P8 Lite 2017, I've tried the PotatoNV method which is, in fact, very easy (the most difficult part was to open the back cover, but with an opening tool it's easier) and no need to downgrade. For me the SkyEmie method was just a waste of time.
pitrazzu said:
(10) After writing down the bootloader code we can close dc-unlocker, connect the mobile phone to a wifi network and search for system updates to return to the latest version of android and therefore to emui8,
if no updates appear, we try to force them by going to settings, wifi, press and hold on the wifi to which we are connected, modify, check advanced options, press on proxy, manual,
in proxy hostname we write localhost and in the port we write 8080 , we press on connect and if we return to the updates item it should find the most recent version. At this point we can update the mobile phone to the most recent version.
Click to expand...
Click to collapse
Hello, i'm stuck at this step, i'm back at EMUI 5.0.3 and when i check for update it tells me "no updates"
Worked for me (PRA-LX1) !!
So easy, except from potatoNV (didn't try back panel is broken, as a result I cannot open my phone) all other free solutions have not worked for me.
Read carefully:This is a dedicated post for general questions only. If you need technical support about flashing or restoring your device, please use the general topic for TB132FU. Please search for your question below before asking.NEW: How to restore the lost Serial Number (on the second response)
How to flash Official global romDid my work help you? Be free to buy me a coffee. PayPal me at @alsbvg
FAQ:
Why so many versions of TB132FU and why so much confusion about the Android system, updates, etc?
There are currently 3 systems available for the tablet known as TB132FU and is really important to find which one you have.
Fake Global version - Modified Android 12
Official International version - Official Android 12 or latest by Lenovo international
Chinese version - Zui 14 based on Android 12 or latest by Lenovo China
But why so many versions then? The Chinese model is apparently cheaper than the international version, so Chinese sellers are selling online the Chinese model with a modified android version to look like the international version.
How to identify which version of TB132FU I have? By the seller:If you purchased your tablet online from china like on Aliexpress or from a seller that sells items from china, you most likely have the “Fake” Global version.
If you purchased your tablet on Lenovos’s website or a certified local or national seller in your country, you most likely have the International version. This version usually costs more.
If you purchased from china or anywhere else, but your tablet has a Chinese interface, you have the Chinese version running ZUI 14 or latest.
How to identify which version of TB132FU I have? By the system version:To make sure which one you have you can also do the following:
On your tablet go to SETTINGS > ABOUT DEVICE > and find your system version.
If it starts with TB132FU_S3 you have the Chinese version running an unofficial android version. The number S3 confirms it’s a modified OS. You will never get any updates.
If it says TB132FU_S0 you have the official international version. This is the official version, so you already have the best compatible system for your tablet. You will get official updates.
If you open the settings and see on the About device menu the system version ZUI, well you have the chinese official device and system.
Can I convert my Chinese TB132FU into the international version?The answer currently is no. Why? To keep it short: There is a code inside your tablet saying “This is the Chinese tablet” and because of this code you can't install the international android system. Maybe in the future, someone from the community will be able to find that code and change it so the tablet thinks it is the international version.
Can I convert my Official Lenovo-bought TB132FU to the Chinese version to use ZUI?Same as the answer above. We need to find the code and how to modify it first.
Can I use Lenovo’s Rescue and Smart Assistant software to convert my Chinese TB132FU into the international version?No. You will brick your device if you try to update your system using this tool.
What are the differences between the Chinese TB132FU and the International version?Chinese version with ZUI 14
Software: It comes with an Android flavor called ZUI currently based on android 12. Updates will be available.
System languages: English and Chinese only.
Full support for super fast charging with the original charger. Full charge in less than 90 minutes in most cases.
Computer mode: No longer available. The online community is pushing Lenovo to enable this option again.
HDR and L1 status: Fully functional HDR and L1 status for HD content on Netflix in most cases.
Chinese version with Fake global version
Software: It comes with a modified Android 12. No updates will be available.
System languages: All languages available.
Slow charging. Can take up to 3 hours to fully charge.
Computer mode: Available.
HDR and L1 status: Falty HDR on most apps. L1 status for HD content on Netflix.
Official International Version
Software: It comes with Android 12. Updates will be available by Lenovo.
System languages: All languages available.
Slow charging. Can take up to 3 hours to fully charge. (By some reports online) This information hasn't been confirmed yet as the community with the official international version is still small.
Computer mode: Available.
HDR and L1 status: Working HDR. L1 status for HD content on Netflix.
(Under construction)
How-tos and tutorials links:
How to install/restore ZUI on my fake global version?There are three options available. Please read all 3 below and decide which one you want to try.
OPTION ONE: If you are in a hurry and have technical knowledge download the file our community colleague @Fatperman managed to upload and install it using the SP flash tool. Thread here. A Step-by-step tutorial will be provided by another community member soon. A link will be provided once available.
OPTION TWO: If you are not in a hurry and don't have the technical knowledge to flash the system, there is an easier way, but it takes one or two days.
1 - Download Lenovo’s Rescue and Smart Assistant software here.
2 - Open the software and create an account. Connecting to Google is easier.
3 - Once connected to an account, find the SMALL blue FEEDBACK button on the right side bottom of your screen and click there.
4 - Put your email address and in COMMENTS write that you have problems flashing the Chinese version of TB132FU and that you would like to restore it to the original ZUI 14 software. PLEASE USE YOUR OWN WORDS.
5 - After one or two days (usually), INSIDE the software you will receive a response with instructions on how to install ZUI more easily. Note: You will not get a response via email, you will receive institutions inside Lenovo’s Rescue and Smart Assistant software.
The instructions are pretty simple. READ THEM carefully once you receive them. It's really easy. Basically, they will send you a link to download a special rescue tool and some credentials. Take a screenshot of the instructions as you will need to uninstall the official Rescue software and will lose the message.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download and install the software they sent, enter using the temporary credentials (the credential are confidential and should not be shared), and follow the instructions on the screenshot you took. You will just need to turn off the tablet, click to restore, and connect the cable. After a few minutes, you will have the original ZUI 14 software.
Thanks again for the amazing help of our colleague @Fatperman for his exceptional work!
NEW - OPTION THREE:
This is by far the easist way to recover or flash the original ZUI 14 on our TB132FU. DON'T CLICK to Restore before reading all the steps.
Step 1: Download the original ZUI firmware here. Extract the files to a new folder. Password is on the table. Read carefully.
Step 2: Download and log in on the official rescue and smart assistant.
Step 3: Select to rescue your device and select as in the picture below:
Step 4: Click to download the firmware.
Step 5: Wait for the download to be completed until you see START Rescue. But don't click there yet. Don't close the program.
Step 6: Click the donwloads icon at the top and identify the folder where the download was saved.
On mine it was saved at C:\ProgramData\RSA\Download\RomFiles
Step 7: Access and Open the folder of the downloaded firmware and DELETE all files there, but don't delete the folder.
Step 8: Go to the ZUI firmware you downloaded before and copy all files inside the folder. Paste them inside the folder where you just deleted all files.
It should look something like this:
Step 9: TURN OFF YOUR TABLET and Go back to the rescue tool and now click the blue button Start Rescue. Follow the instructions on your screen.
Wait for the tablet to restar and DONE. You recovered or donwloaded the original ZUI on your tablet.
How to debloat my recently installed ZUI 14 and remove the Chinese apps and make it look better?1 - After starting your device, select English and connect to your wifi network.
2 - Once you are set, press the home screen for 3 seconds. Click Desktop Settings.
Switch off the "Left one screen".
Change to "Drawer Style"
3 - Find the setting button and go to General Settings > Language & input > Current Keyboard. Change it to English. (You can download Gboard or another keyboard later)
4 - Go back to the original setting screen and click on the search box. Search for google play services. Click to enable. Then search for Google Play Store and enable it as well.
5 - Before opening the Play store and connecting to your account, go to Apps management and uninstall any apps with Chinese characters you may find. Do not uninstall the HD browser just yet in case you need to download something later. Then restart your device.
6 - Open the Google Play store, and connect your account. Now you can update and download all your apps.
(If you see an error saying Google can't connect please follow the steps in this tutorial)
7 - Unistall HD Browser and done.
How to ROOT my TB132FU running ZUI 14?DISCLAMER: You will lose your data, so backup. It can brick your device if you don't know what to do. You need to know how to use ADB and fastboot commands. The tutorial is for advanced users that knows how to use ADB. Do your research first. If anything goes wrong, flash the ZUI firmware again.
For this tutorial you will need:
Windows computer with all necessary drivers installed
Know how to use ADB
The latest MAGISK manager app.
The latest ZUI firmware for TB132FU
Some minutes to complete all the steps.
Step 1: Go to SETTINGS Menu and click multiple times on your ZUI version. This will give you Developer access.
Step 2: Go General Settings menu > Developer options
Step 3: Click to enable OEM unlocking, also enable debugging mode.
Step 4: Connect your USB cable and run the following command:
adb reboot bootloader
Step 5: Run the fllowing command:
fastboot flashing unlock
On your tablet Click volume UP to unlock your bootloader
Wait for the confirmation on the tablet screen
Step 6: Run command:
fastboot reboot
This will make your tablet restart. Skip all configuarion steps on your tablet and install the latest version of MAGISK on your tablet.
Step 7: On your computer, go to the Firmware folder and copy the file boot.img to your tablet.
Step 8: Open MAGISK and click Select and patch a file. Find the boot.img you copied and patch this file. Wait for the process to be completed.
Step 9: Connect your tablet to your computer and access the folder Downloads in your tablet. There you will see a new boot image Magisk created. Rename that file to boot.img
Step 10: This is the most important step. You will now flash this boot.img file using the following commands:
adb reboot bootloader - to reboot to fastboot
fastboot flash boot boot.img
Wait for it to complete then:
fastboot reboot
Done, your tablet is now rooted. You can install Magisk again and root checker to make sure.
How to UNLOCK the bootloader of my TB132FU running ZUI 14?This will delete all you data
Step 1: Go to SETTINGS Menu and click multiple times on your ZUI version. This will give you Developer access.
Step 2: Go General Settings menu > Developer options
Step 3: Click to enable OEM unlocking, also enable debugging mode.
Step 4: Connect your USB cable and run the following command:
adb reboot bootloader
Step 5: Run the fllowing command:
fastboot flashing unlock
On your tablet Click volume UP to unlock your bootloader
Wait for the confirmation on the tablet screen
Step 6: Run command:
fastboot reboot
Done! Your bootloader is now unlocked.
How to Install and use GOOGLE PLAY on my TB132FU running ZUI 14?First you have to download and install a compatible Google Framework app. Got to APKmirror and search for google framework. Click the one that says Google Services Framework 12. Scroll down and find the version "December 17, 2021 GMT-0300". Install this version. Only this or older version will work. Do not try a different one. It will update automatically eventually.
Then go to settings and search for Google Play and enable the app. Done. You can now log in and use the PLay Store
How to RESTORE lost S/N Seria number?
Step 1 - Go back to ZUI 14. Use one of the options provided in this thread.
Step 2 - Unlock bootloader and OEM. Please refer to the tutorial to unlock the bootloader in this thread.
Step 3 - Once your bootloader is unlocked go and install on your computer MTK META Utility. Link here. Also install HxD here.
Step 4 - Turn off your tablet, disconnect the USB cable and open MTK META.
Step 5 - Click the option Dump NV region. Wait for it to finish reading. It will open a folder.
Step 6 - On the folder that opened, right-click with your mouse the file proinfo.bin and click to open with HxD, or open the software and drag and drop the file there.
Step 7 - Edit the proinfo.bin to add your Serial Number. Change the 12345ABCDE you see to your actual S/N. It's on the back of your tablet on a small sticker.
Step 8 - On the same folder press SHIFT on your keyboard and right-click on an empty space and click OPEN CMD/SHELL terminal here. Or if you use a ADB folder, copy the proinfo.bin file to it so you can flash it.
Step 9 - Turn on your tablet, make sure Debugging is active, connect your tablet to the computer and send these two commands:
adb reboot bootloader
(this will reboot your tablet to fastboot although the line says bootloader)
Once you see the red lines send the command:
fastboot flash proinfo proinfo.bin
And done. You can check in your setting menu if your serial number changed.
Now you can reflash ZUI or the global rom.
thanks man
Great job !
als_bvg said:
How to debloat my recently installed ZUI 14 and remove the Chinese apps and make it look better?
4 - Go back to the original setting screen and click on the search box. Search for google play services. Click to enable. Then search for Google Play Store and enable it as well.
5 - Before opening the Play store and connecting to your account, go to Apps management and uninstall any apps with Chinese characters you may find. Do not uninstall the HD browser just yet in case you need to download something later. Then restart your device.
6 - Open the Google Play store, and connect your account. Now you can update and download all your apps.
(If you see an error saying Google can't connect please follow the steps in this tutorial)
7 - Unistall HD Browser and done.
(Under construction)
Click to expand...
Click to collapse
bro im on zui14 and uninstall all apps, i download the google services and play store but cant still connecting to google account, i dtryed the google installer and stay on 3%... any help?
did it, first intall google services framwork, then google play and restart before log in
Hi can you please guys share the Chinese version of the Lenovo RSA no need for the personal credentials, I tried too contact them as you said but I haven't received any answers thanks
Swanzzl said:
Hi can you please guys share the Chinese version of the Lenovo RSA no need for the personal credentials, I tried too contact them as you said but I haven't received any answers
Click to expand...
Click to collapse
I don't think there's a Chinese version of the software. The credentials are needed. They may be off for the holidays so you will need to wait. Hopefully someone gets back to you during this week. Otherwise I would recommend writing again.
after install zui14 my device show message "orange state" in boot, I can't update even with vpn.
can i lock bootloader after installing zui14 in chinese version? how to proceed?
Yes you can. If anything goes wrong you can do everything again. I Unlocked the bootloader and tried flashing a recovery, bricked the tablet and used the tool to fix again.
ednardo777 said:
after install zui14 my device show message "orange state" in boot, I can't update even with vpn.
can i lock bootloader after installing zui14 in chinese version? how to proceed?
Click to expand...
Click to collapse
als_bvg said:
5 - After one or two days (usually), INSIDE the software you will receive a response with instructions on how to install ZUI more easily. Note: You will not get a response via email, you will receive institutions inside Lenovo’s Rescue and Smart Assistant software.
Click to expand...
Click to collapse
Where do I find the instructions in the software? Do they appear as a notification? p.s. I sent the message (feedback) two days ago and still haven't received a answer.
als_bvg said:
Sim você pode. Se algo der errado, você pode fazer tudo de novo. Desbloqueei o bootloader e tentei fazer uma recuperação, bloqueei o tablet e usei a ferramenta para consertar novamente.
Click to expand...
Click to collapse
thanks man
eamcardoso said:
Where do I find the instructions in the software? Do they appear as a notification? p.s. I sent the message (feedback) two days ago and still haven't received a answer.
Click to expand...
Click to collapse
It will popup as a notification inside the rescue tool. They might be off for the holidays. I'll share another method tonight.
Third method on how to flash ZUI or restore the tablet added to the FAQ. Enjoy! Also Tutorial on how to root the device.
als_bvg said:
Third method on how to flash ZUI or restore the tablet added to the FAQ. Enjoy! Also Tutorial on how to root the device.
Click to expand...
Click to collapse
This method worked for me thanks bro
After unlocking the bootloader every time you boot up the device the following text will be displayed on the screen:
Code:
Orange State
Your device has been unlocked and can't be trusted..
Your device will boot in 5 seconds
To remove this text warning and 5s delay you need to change the file "lk.img" (firmware folder):
Open "lk.img" with a hex editor (for example, HxD)
In menu toolbar click "Search-Find" and select "Hex-values" tab.
Search 08 B5 0E 4B 7B 44 1B 68 1B 68 02 2B
Copy text 08 B5 00 20 08 BD 1B 68 1B 68 02 2B
Return back to hex editor window then right click on the highlighted items and select "Paste Insert"
The newly modified 24 characters will be displayed in red
Click "File" and select "Save".
Flash the modified "lk.img" in fastboot mode
fastboot flash lk lk.img
ZUI_14.0.691
The firmware already includes Google Services Framework.
/system/system_ext/priv-app/GoogleServicesFramework/GoogleServicesFramework.apk
com.google.android.gsf - version 12-7567768
It is disabled by default.
When you turn on "Settings - Apps management - Google Basic Services" the application status changes to enabled (installed).
ug0o said:
After unlocking the bootloader every time you boot up the device the following text will be displayed on the screen:
Code:
Orange State
Your device has been unlocked and can't be trusted..
Your device will boot in 5 seconds
To remove this text warning and 5s delay you need to change the file "lk.img" (firmware folder):
Open "lk.img" with a hex editor (for example, HxD)
In menu toolbar click "Search-Find" and select "Hex-values" tab.
Search 08 B5 0E 4B 7B 44 1B 68 1B 68 02 2BView attachment 5799489
Copy text 08 B5 00 20 08 BD 1B 68 1B 68 02 2B
Return back to hex editor window then right click on the highlighted items and select "Paste Insert"View attachment 5799501
The newly modified 24 characters will be displayed in redView attachment 5799503
Click "File" and select "Save".
Flash the modified "lk.img" in fastboot mode
fastboot flash lk lk.img
Click to expand...
Click to collapse
Nice work! Do you have any idea where the code for text on the picture below might be? Technically, if we are able to find this code and modify it, it should allow us to use the Offical Global rom. I tried to replicate these steps and these steps with no success. I can flash the image using fastboot but the message doesn't disappear.
Protip: The version TB132FU_USR_S000034_2206180119_MPR0_ROW allows the bootloader to remain unlocked. Useful for tests with the Global version
While the version "TB132FU_USR_S000089_2210200620_MPR0_ROW" will lock the bootloader and the commands to unlock will not work.
Let me know if you have any insights.
als_bvg said:
Protip: The version TB132FU_USR_S000034_2206180119_MPR0_ROW allows the bootloader to remain unlocked. Useful for tests with the Global version
While the version "TB132FU_USR_S000089_2210200620_MPR0_ROW" will lock the bootloader and the commands to unlock will not work.
Click to expand...
Click to collapse
I had TB132FU_S000034_220618_ROW installed.
I flashed ZUI 14.0.691.
And now I can't flash any firmware through the flashtool. I can't flash my backup of TB132FU_S000034_220618_ROW.
That's why I'm still on the ZUI 14.0.691.
I'm getting used to it
ug0o said:
I had TB132FU_S000034_220618_ROW installed.
I flashed ZUI 14.0.691.
And now I can't flash any firmware through the flashtool. I can't flash my backup of TB132FU_S000034_220618_ROW.
That's why I'm still on the ZUI 14.0.691.
I'm getting used to it
Click to expand...
Click to collapse
Awesome. Just a note: The fake global was TB132FU_S300062_220921_ROW, and the version we could use to try removing the code is TB132FU_USR_S000034_2206180119_MPR0_ROW. This version is flashable via the Third method on the FAQ. I tried to flash a backup using the Flash Tool and even splitting the dump using Wwr MTK tool and using the third flashing method, but no success with the backup either.
But If we manage to locate the 'Incompatible software' code we could use an official ROM.